wifi: iwlwifi: mvm: modify iwl_mvm_ftm_set_secured_ranging() parameters

Modify iwl_mvm_ftm_set_secured_ranging() parameters to support
multiple versions of the target struct.
This is done as preparation for moving to the new range request
version.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.56d6aee320b3.I5a52fa93cd791d0229b392a20f076b7cebb110cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: initiator: move setting the sta_id into a function

Move setting the target's sta_id (and related flags) into a function
to support different versions of the target struct.
This is done as preparation for moving to the new range request
version.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.18e3a6a6f1cb.I85e3ee607b3947448532bc16730f8898a11c92b8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: Remove debug related code

This code is intended for internal testing. Remove it.

Fixes: 30ce039094b5 ("wifi: iwlwifi: mvm: Don't allow EMLSR when the RSSI is low")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.c3b89828efb2.I7ded6348d2fb0cb7e103c4eee033451924c3461d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: initiator: move setting target flags into a function

Move setting the target flags into a dedicated function to support
different versions of the target struct.
This is done as preparation for moving to the new range request
version.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.9d22b61ce589.I7dbe596b4f677638d9a48c3f39b0826a9e35bea4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: handle TPE advertised by AP

6 GHz BSS SP client shall respect TX power limits advertised
by the AP in TPE elements, send the data to the firmware using
the AP_TX_POWER_CONSTRAINTS_CMD command, so do that.

Co-developed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.32f1e2e1447c.I58ac91c38585362aa42bb4a8a59c7d88e67bc40b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: move a constant to constants.h

Move IWL_MVM_MIN_BEACON_INTERVAL_TU to constants.h

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.395f5b24ff82.Id78a5a404c3ae15cbbc950b1f1d7e500a8b92a43@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: remove IWL_MVM_USE_NSSN_SYNC

This is not used and not needed anymore.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.c5edfb967e35.I34a3d54a1dc90d9b2937b0bcbbc508fe3cd41773@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: Enable p2p low latency

Enable p2p low latency by default.

Signed-off-by: Avri Altman <avri.altman@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.21b431bdfc26.I018e330d1e6a76e967b25e9542c2260f0f6ed2a8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: report 64-bit radiotap timestamp

Use the new RX_FLAG_MACTIME_IS_RTAP_TS64 in mac80211 to report
a 64-bit timestamp in the mactime for radiotap only, in case we
report the synchronized PTP clock timestamp (otherwise we really
only have 32 bits anyway).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.4fc44356e7df.Ic8642d35f1090a415e09299a1bd409f51dfb6351@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: add an option to use ptp clock for rx timestamp

Add a debugfs option to use the ptp clock time for rx device
timestamps. This can be useful to e.g. synchronize multiple NICs or
reporting the timestamp in the system clock instead of gp2.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.b197b4f3f9ed.I578ee916d5f517a2e3a89e890a8ea24065946427@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: send DelBA with correct BSSID

In MLO, the deflink BSSID is clearly invalid. Since we fill
the addresses as MLD addresses and translate later, use the
AP address here instead.

This fixes an issue that happens with HW restart, where the
DelBA frame is transmitted, but not processed correctly due
to the wrong BSSID (or even just discarded entirely).  As a
result, the BA sessions are kept alive; however, as other
state is reset during HW restart, this then fails (reorder,
etc.) and data doesn't go through until new BA sessions are
established.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510112601.f4e1effdea29.I98e81f22166b68d4b6211191bcaaf8531b324a77@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: reset negotiated TTLM on disconnect

The negotiated TTLM data must be reset on disconnect, otherwise
it may end up getting reused on another connection. Fix that.

Fixes: 8f500fbc6c65 ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211858.04142e8fe01c.Ia144457e086ebd8ddcfa31bdf5ff210b4b351c22@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: don't stop TTLM works again

There's no need to stop works that have already been
stopped during disconnect, so don't.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211034.f8434be19f56.I021afadc538508da3bc8f95c89f424ca62b94bef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: cancel TTLM teardown work earlier

It shouldn't be possible to run this after disconnecting, so
cancel the work earlier.

Fixes: a17a58ad2ff2 ("wifi: mac80211: add support for tearing down negotiated TTLM")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211034.096a10ccebec.I5584a21c27eb9b3e87b9e26380b627114b32ccba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: cancel multi-link reconf work on disconnect

This work shouldn't run after we're disconnecting. Cancel it earlier
(and then don't cancel it in stop later.)

Fixes: 8eb8dd2ffbbb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211034.ac754794279f.Ib9fbb1dab50c6b67f6de9be09a6c452ce89bbd50@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: fix TTLM teardown work

The worker calculates the wrong sdata pointer, so if it ever
runs, it'll crash. Fix that.

Fixes: a17a58ad2ff2 ("wifi: mac80211: add support for tearing down negotiated TTLM")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211853.e6471800c76d.I8b7c2d6984c89a11cd33d1a610e9645fa965f6e1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: use __counted_by where appropriate

Annotate 'sub_specs' of 'struct cfg80211_sar_specs', 'channels'
of 'struct cfg80211_sched_scan_request', 'channels' of 'struct
cfg80211_wowlan_nd_match', and 'matches' of 'struct
cfg80211_wowlan_nd_info' with '__counted_by' attribute. Briefly
tested with clang 18.1.1 and CONFIG_UBSAN_BOUNDS running iwlwifi.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240517153332.18271-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Add EHT UL MU-MIMO flag in ieee80211_bss_conf

Add flag for Full Bandwidth UL MU-MIMO for EHT. This is utilized
to pass EHT MU-MIMO configurations from user space to driver
in AP mode.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Link: https://msgid.link/20240515181327.12855-2-quic_pradeepc@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: refactor chanreq.ap setting

There are now three places setting up chanreq.ap which always
depends on the mode (EHT being used or not) and override flag.
Refactor that code into a common function with a comment, to
make that clearer.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.5cd6a209e58a.I3be318959d9e2df5dccd2d0938c3d2fcc6688030@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: handle TPE element during CSA

Handle the transmit power envelope (TPE) element during
channel switch, applying it when the channel switch is
done.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.486c33157d18.Idf971ad801b6961c177bdf42cc323fd1a4ca8165@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: handle wider bandwidth OFDMA during CSA

During channel switch, track the AP configuration in the
chanreq, so that wider bandwidth OFDMA is taken into
account correctly, since multiple channel contexts may
be needed due to sharing not being possible due to
wider bandwidth OFDMA.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.b2c5a72dac1b.I69f65cb2e75d4a49a174b1aede68bf8ff0a3cab3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: collect some CSA data into sub-structs

Collect the CSA data in ieee80211_link_data_managed and
ieee80211_link_data into a csa sub-struct to clean up a
bit and make adding new things more obvious.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.29f954b1f576.I9a683a9647c33d4dd3011aade6677982428c1082@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: mlme: handle cross-link CSA

If we see a channel switch announcement on one link for
another, handle that case and start the CSA. The driver
can react to this in whatever way it needs. The stack
will have the ability to track it via the RNR/MLE in the
reporting link's beacon if it sees it for inactive links
and adjust everything accordingly.

Note that currently the timings for the CSA aren't set,
the values are only used by the Intel drivers, and they
don't need this for newer devices that support MLO, so
I've left it out for now.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415112355.4d34b6a31be7.Ie8453979f5805873a8411c99346bcc3810cd6476@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: restrict operation during radar detection

Just like it's not currently possible to start radar
detection while already operating, it shouldn't be
possible to start operating while radar detection is
running. Fix that.

Also, improve the check whether operating (carrier
might not be up if e.g. attempting to join IBSS).

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211158.ae8dca3d0d6c.I7c70a66a5fbdbc63a78fee8a34f31d1995491bc3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: move radar detect work to sdata

At some point we thought perhaps this could be per link, but
really that didn't happen, and it's confusing. Radar detection
still uses the deflink to allocate the channel, but the work
need not be there. Move it back.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211311.43bd82c6da04.Ib39bec3aa198d137385f081e7e1910dcbde3aa1b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD v11

Add support for enable/disable 11be for china and South Korea by
reading DSM function 12 from UEFI or ACPI and sending it to the FW.

Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.037613d03c87.I4e5ee63c0dbdd4bd6c48daee7b0c88462b702423@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: move code from iwl-eeprom-parse to dvm

Move code that is DVM only to dvm.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.9a1b6ef116e0.I217a513f544d5288a7760d265f51419e81abfd9d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: kill iwl-eeprom-read

This is used by dvm only, move to dvm.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.72f4bf256c8d.I7433bda9b0fc9eece5210db2cb90c2f03973f5ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: don't skip link selection

If we exit EMLSR due to a IWL_MVM_ESR_EXIT*, a MLO scan followed by a
link selection is scheduled with a delay of 30 seconds.
If during that 30 seconds EMLSR was blocked and unblocked
(IWL_MVM_ESR_BLOCKED*), we would still want to get the needed data from
the MLO scan and select link accordingly, and not return immediately to
EMLSR.

Fixes: 2f33561ea8f9 ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512152312.caab27a8dd8f.I63f67e213d5e05416f71513a8d914917d59aa44f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: add mvm-specific guard

Add and use an mvm-specific guard for the mvm mutex.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.7391425b3af2.I1b109f56753dd3f35602dd2c5cf6e1e35aee313d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: simplify TX tracing

There's no need to calculate again whether data should
be included or be handled externally, just check if any
space for it was already reserved.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.a3d3b4796460.I85bd3029baee24ebf0be04db7d6bf01834090869@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: tracing: fix condition to allocate buf1

There's no need to allocate buf1 if we're not going to
write anything to it, and the condition for writing is
(correctly) "hdr_len > 0 && !iwl_trace_data()". Also
allocate the event space only under the same condition.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.a11e6490d053.Ie090beea70d2f271bb22c9b0e287dbd342fb2a96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: leave a print in the logs when we call fw_nmi()

When we crash the firmware, we need to know why we decided to do so.
Almost all the callsites of iwl_force_nmi() print something in the logs
that explain why the driver decided to crash the firmware.
Debugfs doesn't print anything and it is then hard to understand why the
firmware has crashed.
Add a simple print in the debugfs hook to ease the debug.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512075822.e2558de222dc.Idd81777c47264e6f557b086625895c1dc2f667f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: disable dynamic EMLSR when AUTO_EML is false

When AUTO_EML is set to false, this change ignores the exit criteria,
for testing purposes. Currently, if AUTO_EML is disabled, the
driver will not select a link or enter EMLSR, but will still exit if one
of the criteria is not fulfilled.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512072733.10a0b5da6ec2.I46fd578a3ef6cdbf14fdc4dfa97b4be008fe68e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: use vif P2P type helper

Use ieee80211_vif_type_p2p instead of checking for IFTYPE_AP in
combination with vif->p2p.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.15a00a812c1b.I5ffee795d960c9beda46a934f5b4c70acde112f9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: don't track used links separately

We track which link is using which FW link ID, so there
really isn't a need to separately track which link IDs
are in use. Remove that code and check the table when
looking for a new link ID to use.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.1a67d8af815f.Ie642c12dce3ab55c688abd9a25918569e83e558a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: always print the firmware version in hex

All our firmware versions should now be printed in hex.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.cae4c562b2c3.I5043383bd0e81f872c55046afd2c6560f482c8e0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: fw: avoid bad FW config on RXQ DMA failure

In practice, iwl_trans_get_rxq_dma_data() will not fail,
it only can do that if called with the wrong arguments.
But it does have an error value and doesn't initialize
the argument when it fails, so don't use the value then.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.faf3a1b87589.I77c950173cb914676fbd28483e5ef420bb9f1bc9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: fw: api: Add new timepoint for scan failure

Add new time point to get the details of scan failure
While on it added other missing enum to match with FW.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.6781e76990c4.Iadfb3f6dd63a98fc35019772266b5ebddc5b5270@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mei: unify iwl_mei_set_power_limit() prototype

The two versions of iwl_mei_set_power_limit() are a bit different,
and while really the const isn't all that necessary on the inline,
it's still better to have it be the same.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.854427753c92.I557716085cb1f6a35d1f97640388fa421f42a56a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: mark bad no-data RX as having bad PLCP

Just like with any other frame, mac80211 will do sanity checks
on no-data RX (representing e.g. sounding PPDUs), and if e.g.
the NSS is wrong, it will warn. This isn't a good idea if we
already know the frame wasn't received well, e.g. has bad PLCP.
Unless the firmware reports "no error", set the bad PLCP flag
to skip checks in mac80211.

Also, since we're now extracting two different values from the
info field, use le32_get_bits() for both.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.e6adcb9a6ece.Ic14c2e8ed5e80d48af78b2f04e9f08beeb62d68e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: bump FW API to 91 for BZ/SC devices

Start supporting API version 91 for new devices.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.27c00099e8b7.I99b4f24bba073414dd04a6e04a359c7fbba52990@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: add a of print of a few commands

This is needed for debugging.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.65fc46e2ffbc.I19d4ef2cc06bfee7d9644a376d39399f0f6eaa15@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: Use the SMPS cfg of the correct link

The exiting code is checking the SMPS mode of deflink.
Use the SMPS mode of the link_sta function parameter.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.f3e2834e78f5.Ie24b431a6ad0dbf977afbbd4d2116bfe2426a0d5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: don't always set antenna in beacon template cmd

This needs to be set only if the FW is not capable of selecting an
antenna on its own.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.73d790911268.I158dc1dbc9c2e199c69d8213e5496d2de72da28b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: remove redundant reading from NVM file

The driver reads xtal_calib from NVM file, but actually never uses it.
This is only used in dvm driver.

Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.c4d1a4571049.I7d7b73dccb793e220f023e0d049b082b043ca95e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: remove fw_running op

fw_running assumes that memory can be retrieved only after alive.
This assumption is no longer true as we support dump before alive.
To avoid invalid access to the NIC, check that STATUS_DEVICE_ENABLED
bit in trans status is set before dumping instead of the prior check.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.ca07138cedeb.I090e31d3eaeb4ba19f5f84aba997ccd36927e9ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: Don't set NO_HT40+/- flags on 6 GHz band

These flags are not needed on 6 GHz channels, and anyway they were set
incorrectly.
This in turn resulted in alternating channel flags, preventing reg domain
rules to be merged together, so cfg80211 couldn't even send them to the
user space, as the regulatory domain was too large.
Fix it.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.b0d51b2229f8.I092e21cde43320ffc2eff17f5748ff9c87c87fcf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: call ieee80211_sta_recalc_aggregates on A-MSDU size update

The driver needs to call this function when the A-MSDU size changes.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.632ee6612a79.Ice3a536a4cbfe60d0edfa231fcb79ee7ab9495dd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: set A-MSDU size on the correct link

The existing code sets the max A-MSDU size to the deflink, set it
on the given link instead.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.4de5c1a031ca.I063bc1508e5068b32e321b0f268bc51dba0c0747@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: define link_sta in the relevant scope

The link_sta pointer is now only used inside this if, so define it inside
its scope.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.e0a1dd285d9a.Id5ff16fb98af0c5f533aed6b5ec3cc856401e488@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: debugfs: add entry for setting maximum TXOP time

Add an entry for setting the maximum TXOP time in microseconds.
The configured value can be read from the same entry.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.b8d17a9c1731.I57c33574a61edd68bd0ec1aa7009f31111fd7efe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: allow UAPSD when in SCM

Allow UAPSD when P2P and BSS interfaces share the same channel.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.1ec19d432497.Id6de5337c878fa70e85bfcf6f4e0e34ce60756fb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: simplify the uAPSD coexistence limitation code

uAPSD can't be enabled on BSS or P2P Client if there is
another active interface (e.g. associated client). Allow
the code that apply those limitations to run on BSS as well.
Also forbid uAPSD if we have an IBSS or NAN interface in
the system.
Since we are now forbidding uAPSD in any concurrency
scenario, we don't need to check the number of PHY
contexts.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.4ac26534adf7.Ib892020177e86603b2be3a105f8717b9a15951d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: dvm: clean up rs_get_rate() logic

The logic here is rather convoluted - we cannot get here with
lq_sta being NULL as mac80211 will (no longer) call us like
that, and since I removed the rate_control_send_low() call in
this function there's no longer any point in setting priv_sta
to NULL either.

So the only thing that remains to check is if we have actually
initialized our lq_sta->drv pointer, and exit if we didn't in
which case we'll use the data mac80211 already set up for the
low rate usage.

Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Link: https://msgid.link/20240510170500.a4cdb41825eb.Id202bcc967c32829f70ab1412f8893b6eb7f78e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: track changes in AP's TPE

If the TPE (transmit power envelope) is changed, detect and
report that to the driver.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506214536.103dda923f45.I990877e409ab8eade9ed7c172272e0cae57256cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: pass parsed TPE data to drivers

Instead of passing the full TPE elements, in all their glory
and mixed up data formats for HE backward compatibility, parse
them fully into the right values, and pass that to the drivers.

Also introduce proper validation already in mac80211, so that
drivers don't need to do it, and parse the EHT portions.

The code now passes the values in the right order according to
the channel used by an interface, which could also be a subset
of the data advertised by the AP, if we couldn't connect with
the full bandwidth (for whatever reason.)

Also add kunit tests for the more complicated bits of it.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.2aa839969b60.I265b28209e0b29772b2f125f7f83de44a4da877b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ath11k: fix TPE power levels

The chanctx can be shared, but it seems like the TPE values for
this vif should only reflect the channel that the vif uses, which
is captured in bss_conf->chanreq.oper rather than the chanctx.
Use that when calculating defaults, a similar issue is where the
data from the AP is processed, but I'm moving that to mac80211.

Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.d99fcf5856b9.I359bb401ea74bf82dc981a86a7ca3fa44d169d2e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211/ath11k: remove IEEE80211_MAX_NUM_PWR_LEVEL

The define IEEE80211_MAX_NUM_PWR_LEVEL doesn't make much
sense. Yes, that table has a maximum value of 8, and the
table will actually remain that way, but EHT introduced
a way to encode more levels for 320 MHz channels.

Remove IEEE80211_MAX_NUM_PWR_LEVEL and, for ath11k being
the only user, add ATH11K_NUM_PWR_LEVELS, where it makes
sense since it cannot support 320 MHz channels.

Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.9818e5471055.Icece7e47e963d6b68e0d97ba13c102b37fbaa689@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: update 6 GHz AP power type before association

6 GHz AP power type details are required to set proper tx power
used to send frames.

Update AP power type received in beacon while preparing
for connection instead of after association so the frames
before association can use the correct tx power.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Link: https://msgid.link/20240506214536.310434f55f76.I6aca291ee06265e3f63e0f9024ba19a850b53a33@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: remove extra link STA functions

There's no need to have a lockdep assert and then call
another function, just move everything into one place.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211934.9759564a25f4.I88d43aa459d15c1d6230152e76b7757c2cdd6085@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: remove outdated comments

These comments are no longer correct, it's a wiphy work now
so it will go away immediately when canceled.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211422.68bc10efbd8a.If80f43f4c8b9db1f5266f70d93a805f8c7463fe2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: add tracing for wiphy work

Add trace events to trace when wiphy works are queued (or
delayed ones scheduled), and other APIs are called. Also
add an event when the worker starts, before acquiring the
mutex, to be able to see potential delays due to locking.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://msgid.link/20240506210002.bf1840a1d22d.I4abba048c1c4017345640219cf1384a0b2288dd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: sort trace events again

They were meant to be split into ops and APIs, but some
ops were added in the wrong place. Fix that.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506210002.0b3a86a5d8d7.I5591c03223bdb95597e181de63a2eded424de34c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: nl80211: disallow setting special AP channel widths

Setting the AP channel width is meant for use with the normal
20/40/... MHz channel width progression, and switching around
in S1G or narrow channels isn't supported. Disallow that.

Reported-by: syzbot+bc0f5b92cc7091f45fb6@syzkaller.appspotmail.com
Link: https://msgid.link/20240515141600.d4a9590bfe32.I19a32d60097e81b527eafe6b0924f6c5fbb2dc45@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: document two FTM related functions

Add some documentation to ieee80211_is_timing_measurement()
and ieee80211_is_ftm().

Link: https://msgid.link/20240515093852.229aa69e972c.Ifae6762a698e79cd5a49a055fe4c32330e826200@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: document function return values

These are all missing, as pointed out when running kernel-doc.
Add return value documentation and fix some small things while
at it.

Link: https://msgid.link/20240515093852.1cd5ad8f354d.Idc16e9767fa42de80b659c32efc58aea38c26996@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: remove ieee80211_next_tbtt_present()

This is actually completely equivalent to the other function
ieee80211_is_s1g_short_beacon(), but open-codes the logic.
Implement the necessary logic in ieee80211_is_s1g_short_beacon()
and remove ieee80211_next_tbtt_present().

Link: https://msgid.link/20240515093852.774ced74dea8.I152525b4cff6e6a25be6c48fe6a4b89f17bab8a9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: radiotap: document ieee80211_get_radiotap_len() return value

Document the return value of ieee80211_get_radiotap_len() in
the proper kernel-doc format.

Link: https://msgid.link/20240515093852.143aadfdb094.I8795ec1e8cfd7106d58325fb514bae92625fb45c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: add missing doc short descriptions

Some structures erroneously don't have a short description,
add the missing descriptions.

Link: https://msgid.link/20240515093852.16f4355e918e.I940276a4fb006ada68ab1a3e6077e3229fff0f14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: regulatory: remove extra documentation

The struct member country_ie_checksum doesn't exist, so
don't document it.

Link: https://msgid.link/20240515093852.ebcc9673558b.Ie0b58c1249c6375c60859fa6474d7cdd8862b065@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: rt2x00: remove unused delayed work data from link description

Remove unused 'agc_work' and 'vco_work' members of 'struct link'.
This follows commit d96324703ffa ("rt2x00: merge agc and vco works
with link tuner") where AGC and VCO calibration code was completely
redesigned. Compile tested only.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240515152824.143537-1-dmantipov@yandex.ru

wifi: mwifiex: Fix interface type change

When changing the interface type we also need to update the bss_num, the
driver private data is searched based on a unique (bss_type, bss_num)
tuple, therefore every time bss_type changes, bss_num must also change.

This fixes for example an issue in which, after the mode changed, a
wireless scan on the changed interface would not finish, leading to
repeated -EBUSY messages to userspace when other scan requests were
sent.

Fixes: c606008b7062 ("mwifiex: Properly initialize private structure on interface type changes")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240510110458.15475-1-francesco@dolcini.it

wifi: wilc1000: read MAC address from fuse at probe

The default netdev interface exposed by WILC1000 is registered at probe,
but the chip mac address is not known until ndo_open, which will load and
start chip firmware and then retrieve stored MAC address from it. As a
consequence, the interface has uninitialized value (00:00:00:00:00) until a
user brings up the interface.

Fix MAC address at probe by setting the following steps:
- at probe, read MAC address directly from fuse
- whenever a new netdevice is created, apply saved mac address (which can
  be a user-provided address, or the eFuse Mac address if no address has
  been passed by user)
- whenever an interface is brought up for the first time (and so the
  firmware is loaded and started), enforce netdevice mac address to the
  chip (in case user has changed it)

Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Closes: https://lore.kernel.org/netdev/CAEyMn7aV-B4OEhHR4Ad0LM3sKCz1-nDqSb9uZNmRWR-hMZ=z+A@mail.gmail.com/T/
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Co-developed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-6-afef09f1cd10@bootlin.com

wifi: wilc1000: make sdio deinit function really deinit the sdio card

In order to be able to read raw registers (eg the nv mac address) in
wilc1000 during probe before the firmware is loaded and running, we need to
run the basic sdio functions initialization, but then we also need to
properly deinitialize those right after, to preserve the current driver
behavior (keeping the chip idle/unconfigured until the corresponding
interface is brought up). Calling wilc_sdio_deinit in its current form is
not enough because it merely resets an internal flag.

Implement a deinit sequence which symmetrically reset all steps performed
in wilc_sdio_init (only for parts activating/deactivating features, for the
sake of simplicity, let's ignore blocks size configuration reset)

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-5-afef09f1cd10@bootlin.com

wifi: wilc1000: add function to read mac address from eFuse

wilc driver currently reads and sets mac address by firmware calls. It
means that we can not access mac address if no interface has been brought
up (so firmware is up and running). Another way to get mac address is to
read it directly from eFUSE.

Add a function helper to read the mac address written in eFuse, without
firmware assistance

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-4-afef09f1cd10@bootlin.com

wifi: wilc1000: set wilc_set_mac_address parameter as const

Any attempt to provide a const mac address to wilc_set_mac_address results
in the following warning:

warning: passing argument 2 of 'wilc_set_mac_address' discards 'const'
qualifier from pointer target type [-Wdiscarded-qualifiers]
[...]
drivers/net/wireless/microchip/wilc1000/hif.h:170:52: note: expected 'u8 *'
{aka 'unsigned char *'} but argument is of type 'const unsigned char *'a
int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr);

Instead of using an explicit cast each time we need provide a MAC address,
set the function parameter as const

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-3-afef09f1cd10@bootlin.com

wifi: wilc1000: register net device only after bus being fully initialized

SDIO/SPI probes functions automatically add a default wlan interface on top
of registered wiphy, through wilc_cfg80211_init which in turn calls
wilc_netdev_ifc_init. However, bus is still not fully initialized when we
register corresponding net device (for example we still miss some private
driver data pointers), which for example makes it impossible to
retrieve MAC address from chip (which is supposed to be set on net device
before its registration) before registering net device. More generally, net
device registration should not be done until driver has fully initialized
everything and is ready to handle any operation  on the net device.

Prevent net device from being registered so early by doing it at the end of
probe functions. Apply this logic to both sdio and spi buses.

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-2-afef09f1cd10@bootlin.com

wifi: wilc1000: set net device registration as last step during interface creation

net device registration is currently done in wilc_netdev_ifc_init but
other initialization operations are still done after this registration.
Since net device is assumed to be usable right after registration, it
should be the very last step of initialization.

Move netdev registration at the very end of wilc_netdev_ifc_init to let
this function completely initialize netdevice before registering it.

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-1-afef09f1cd10@bootlin.com

wifi: brcmsmac: LCN PHY code is used for BCM4313 2G-only device

The band_idx variable in the function wlc_lcnphy_tx_iqlo_cal() will
never be set to 1 as BCM4313 is the only device for which the LCN PHY
code is used. This is a 2G-only device.

Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240509231037.2014109-1-samasth.norway.ananda@oracle.com

wifi: iwlegacy: do not skip frames with bad FCS

Monitor/sniffer mode benefits from all types of frames, even if FCS
check fails. But we must mark frames as such.

Tested on iwl3945 only.

Signed-off-by: Andrii Batyiev <batyiev@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240509101140.32664-1-batyiev@gmail.com

Merge tag 'wireless-next-2024-05-08' of git://git./linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.10

The third, and most likely the last, "new features" pull request for
v6.10 with changes both in stack and in drivers. In ath12k and rtw89
we disabled Wireless Extensions just like with iwlwifi earlier. Wi-Fi
7 devices will not support Wireless Extensions (WEXT) anymore so if
someone is still using the legacy WEXT interface it's time to switch
to nl80211 now!

We merged wireless into wireless-next as we decided not to send a
wireless pull request to v6.9 this late in the cycle. Also an
immutable branch with MHI subsystem was merged to get ath11k and
ath12k hibernation working.

Major changes:

mac80211/cfg80211
 * handle color change per link

mt76
 * mt7921 LED control
 * mt7925 EHT radiotap support
 * mt7920e PCI support

ath12k
 * debugfs support
 * dfs_simulate_radar debugfs file
 * disable Wireless Extensions
 * suspend and hibernation support
 * ACPI support
 * refactoring in preparation of multi-link support

ath11k
 * support hibernation (required changes in qrtr and MHI subsystems)
 * ieee80211-freq-limit Device Tree property support

ath10k
 * firmware-name Device Tree property support

rtw89
 * complete features of new WiFi 7 chip 8922AE including BT-coexistence
   and WoWLAN
 * use BIOS ACPI settings to set TX power and channels
 * disable Wireless Extensios on Wi-Fi 7 devices

iwlwifi
 * block_esr debugfs file
 * support again firmware API 90 (was reverted earlier)
 * provide channel survey information for Automatic Channel Selection (ACS)

* tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (214 commits)
  wifi: mwl8k: initialize cmd->addr[] properly
  wifi: iwlwifi: Ensure prph_mac dump includes all addresses
  wifi: iwlwifi: mvm: don't request statistics in restart
  wifi: iwlwifi: mvm: exit EMLSR if secondary link is not used
  wifi: iwlwifi: mvm: add beacon template version 14
  wifi: iwlwifi: mvm: align UATS naming with firmware
  wifi: iwlwifi: Force SCU_ACTIVE for specific platforms
  wifi: iwlwifi: mvm: record and return channel survey information
  wifi: iwlwifi: mvm: add the firmware API for channel survey
  wifi: iwlwifi: mvm: Fix race in scan completion
  wifi: iwlwifi: mvm: Add a print for invalid link pair due to bandwidth
  wifi: iwlwifi: mvm: add a debugfs for reading EMLSR blocking reasons
  wifi: iwlwifi: mvm: Add active EMLSR blocking reasons prints
  wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
  wifi: iwlwifi: mvm: fix primary link setting
  wifi: iwlwifi: mvm: use already determined cmd_id
  wifi: iwlwifi: mvm: don't reset link selection during restart
  wifi: iwlwifi: Print EMLSR states name
  wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active
  wifi: iwlwifi: mvm: fix typo in debug print
  ...
====================

Link: https://lore.kernel.org/r/20240508120726.85A10C113CC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'netdevsim-add-napi-support'

David Wei says:

====================
netdevsim: add NAPI support

Add NAPI support to netdevsim and register its Rx queues with NAPI
instances. Then add a selftest using the new netdev Python selftest
infra to exercise the existing Netdev Netlink API, specifically the
queue-get API.

This expands test coverage and further fleshes out netdevsim as a test
device. It's still my goal to make it useful for testing things like
flow steering and ZC Rx.
====================

Link: https://lore.kernel.org/r/20240507163228.2066817-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: selftest: add test for netdev netlink queue-get API

Add a selftest for netdev generic netlink. For now there is only a
single test that exercises the `queue-get` API.

The test works with netdevsim by default or with a real device by
setting NETIF.

Add a timeout param to cmd() since ethtool -L can take a long time on
real devices.

Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netdevsim: add NAPI support

Add NAPI support to netdevim, similar to veth.

* Add a nsim_rq rx queue structure to hold a NAPI instance and a skb
  queue.
* During xmit, store the skb in the peer skb queue and schedule NAPI.
* During napi_poll(), drain the skb queue and pass up the stack.
* Add assoc between rxq and NAPI instance using netif_queue_set_napi().

Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: drv-net: add checksum tests

Run tools/testing/selftest/net/csum.c as part of drv-net.
This binary covers multiple scenarios, based on arguments given,
for both IPv4 and IPv6:

- Accept UDP correct checksum
- Detect UDP invalid checksum
- Accept TCP correct checksum
- Detect TCP invalid checksum

- Transmit UDP: basic checksum offload
- Transmit UDP: zero checksum conversion

The test direction is reversed between receive and transmit tests, so
that the NIC under test is always the local machine.

In total this adds up to 12 testcases, with more to follow. For
conciseness, I replaced individual functions with a function factory.

Also detect hardware offload feature availability using Ethtool
netlink and skip tests when either feature is off. This need may be
common for offload feature tests and eventually deserving of a thin
wrapper in lib.py.

Missing are the PF_PACKET based send tests ('-P'). These use
virtio_net_hdr to program hardware checksum offload. Which requires
looking up the local MAC address and (harder) the MAC of the next hop.
I'll have to give it some though how to do that robustly and where
that code would belong.

Tested:

        make -C tools/testing/selftests/ \
                TARGETS="drivers/net drivers/net/hw" \
                install INSTALL_PATH=/tmp/ksft
        cd /tmp/ksft

sudo NETIF=ens4 REMOTE_TYPE=ssh \
REMOTE_ARGS="root@10.40.0.2" \
LOCAL_V4="10.40.0.1" \
REMOTE_V4="10.40.0.2" \
./run_kselftest.sh -t drivers/net/hw:csum.py

Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240507154216.501111-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

phonet: no longer hold RTNL in route_dumpit()

route_dumpit() already relies on RCU, RTNL is not needed.

Also change return value at the end of a dump.
This allows NLMSG_DONE to be appended to the current
skb at the end of a dump, saving a couple of recvmsg()
system calls.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Remi Denis-Courmont <courmisch@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507121748.416287-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: annotate data-races around dev->if_port

Various ndo_set_config() methods can change dev->if_port

dev->if_port is going to be read locklessly from
rtnl_fill_link_ifmap().

Add corresponding WRITE_ONCE() on writer sides.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507184144.1230469-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dst_cache: minor optimization in dst_cache_set_ip6()

There is no need to use this_cpu_ptr(dst_cache->cache) twice.

Compiler is unable to optimize the second call, because of
per-cpu constraints.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240507132717.627518-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dst_cache: annotate data-races around dst_cache->reset_ts

dst_cache->reset_ts is read or written locklessly,
add READ_ONCE() and WRITE_ONCE() annotations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240507132000.614591-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink/specs: Add VF attributes to rt_link spec

Add support for retrieving VFs as part of link info. For example:

./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
  --do getlink --json '{"ifi-index": 38, "ext-mask": ["vf", "skip-stats"]}'
{'address': 'b6:75:91:f2:64:65',
 [snip]
 'vfinfo-list': {'info': [{'broadcast': b'\xff\xff\xff\xff\xff\xff\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00',
                           'link-state': {'link-state': 'auto', 'vf': 0},
                           'mac': {'mac': b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00',
                                   'vf': 0},
                           'rate': {'max-tx-rate': 0,
                                    'min-tx-rate': 0,
                                    'vf': 0},
                           'rss-query-en': {'setting': 0, 'vf': 0},
                           'spoofchk': {'setting': 0, 'vf': 0},
                           'trust': {'setting': 0, 'vf': 0},
                           'tx-rate': {'rate': 0, 'vf': 0},
                           'vlan': {'qos': 0, 'vf': 0, 'vlan': 0},
                           'vlan-list': {'info': [{'qos': 0,
                                                   'vf': 0,
                                                   'vlan': 0,
                                                   'vlan-proto': 0}]}},
                          {'broadcast': b'\xff\xff\xff\xff\xff\xff\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00',
                           'link-state': {'link-state': 'auto', 'vf': 1},
                           'mac': {'mac': b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00',
                                   'vf': 1},
                           'rate': {'max-tx-rate': 0,
                                    'min-tx-rate': 0,
                                    'vf': 1},
                           'rss-query-en': {'setting': 0, 'vf': 1},
                           'spoofchk': {'setting': 0, 'vf': 1},
                           'trust': {'setting': 0, 'vf': 1},
                           'tx-rate': {'rate': 0, 'vf': 1},
                           'vlan': {'qos': 0, 'vf': 1, 'vlan': 0},
                           'vlan-list': {'info': [{'qos': 0,
                                                   'vf': 1,
                                                   'vlan': 0,
                                                   'vlan-proto': 0}]}}]},
 'xdp': {'attached': 0}}

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240507103603.23017-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: net: ipq4019-mdio: add IPQ9574 compatible

Add a compatible property specific to IPQ9574. This should be used
along with the IPQ4019 compatible. This second compatible serves the
same purpose as the ipq{5,6,8} compatibles. This is to indicate that
the clocks properties are required.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240507024758.2810514-1-mr.nuke.me@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

test: hsr: Call cleanup_all_ns when hsr_redbox.sh script exits

Without this change the created netns instances are not cleared after
this script execution. To fix this problem the cleanup_all_ns function
from ../lib.sh is called.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ax25: Remove superfuous "return" from ax25_ds_set_timer

Remove the explicit call to "return" in the void ax25_ds_set_timer
function that was introduced in 78a7b5dbc060 ("ax.25: x.25: Remove the
now superfluous sentinel elements from ctl_table array").

Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipvs: allow some sysctls in non-init user namespaces

Let's make all IPVS sysctls writtable even when
network namespace is owned by non-initial user namespace.

Let's make a few sysctls to be read-only for non-privileged users:
- sync_qlen_max
- sync_sock_size
- run_estimation
- est_cpulist
- est_nice

I'm trying to be conservative with this to prevent
introducing any security issues in there. Maybe,
we can allow more sysctls to be writable, but let's
do this on-demand and when we see real use-case.

This patch is motivated by user request in the LXC
project [1]. Having this can help with running some
Kubernetes [2] or Docker Swarm [3] workloads inside the system
containers.

Link: https://github.com/lxc/lxc/issues/4278
Link: https://github.com/kubernetes/kubernetes/blob/b722d017a34b300a2284b890448e5a605f21d01e/pkg/proxy/ipvs/proxier.go#L103
Link: https://github.com/moby/libnetwork/blob/3797618f9a38372e8107d8c06f6ae199e1133ae8/osl/namespace_linux.go#L682
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Simon Horman <horms@verge.net.au>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipvs: add READ_ONCE barrier for ipvs->sysctl_amemthresh

Cc: Julian Anastasov <ja@ssi.bg>
Cc: Simon Horman <horms@verge.net.au>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: dwmac-ipq806x: account for rgmii-txid/rxid/id phy-mode

Currently the ipq806x dwmac driver is almost always used attached to the
CPU port of a switch and phy-mode was always set to "rgmii" or "sgmii".

Some device came up with a special configuration where the PHY is
directly attached to the GMAC port and in those case phy-mode needs to
be set to "rgmii-id" to make the PHY correctly work and receive packets.

Since the driver supports only "rgmii" and "sgmii" mode, when "rgmii-id"
(or variants) mode is set, the mode is rejected and probe fails.

Add support also for these phy-modes to correctly setup PHYs that requires
delay applied to tx/rx.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bridge: switchdev: Improve error message for port_obj_add/del functions

Enhance the error reporting mechanism in the switchdev framework to
provide more informative and user-friendly error messages.

Following feedback from users struggling to understand the implications
of error messages like "failed (err=-28) to add object (id=2)", this
update aims to clarify what operation failed and how this might impact
the system or network.

With this change, error messages now include a description of the failed
operation, the specific object involved, and a brief explanation of the
potential impact on the system. This approach helps administrators and
developers better understand the context and severity of errors,
facilitating quicker and more effective troubleshooting.

Example of the improved logging:

[   70.516446] ksz-switch spi0.0 uplink: Failed to add Port Multicast
               Database entry (object id=2) with error: -ENOSPC (-28).
[   70.516446] Failure in updating the port's Multicast Database could
               lead to multicast forwarding issues.
[   70.516446] Current HW/SW setup lacks sufficient resources.

This comprehensive update includes handling for a range of switchdev
object IDs, ensuring that most operations within the switchdev framework
benefit from clearer error reporting.

Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv4: add tracepoint for icmp_send

Introduce a tracepoint for icmp_send, which can help users to get more
detail information conveniently when icmp abnormal events happen.

1. Giving an usecase example:
=============================
When an application experiences packet loss due to an unreachable UDP
destination port, the kernel will send an exception message through the
icmp_send function. By adding a trace point for icmp_send, developers or
system administrators can obtain detailed information about the UDP
packet loss, including the type, code, source address, destination address,
source port, and destination port. This facilitates the trouble-shooting
of UDP packet loss issues especially for those network-service
applications.

2. Operation Instructions:
==========================
Switch to the tracing directory.
        cd /sys/kernel/tracing
Filter for destination port unreachable.
        echo "type==3 && code==3" > events/icmp/icmp_send/filter
Enable trace event.
        echo 1 > events/icmp/icmp_send/enable

3. Result View:
================
 udp_client_erro-11370   [002] ...s.12   124.728002:
 icmp_send: icmp_send: type=3, code=3.
 From 127.0.0.1:41895 to 127.0.0.1:6666 ulen=23
 skbaddr=00000000589b167a

Signed-off-by: Peilin He <he.peilin@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Liu Chun <liu.chun2@zte.com.cn>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ksz-dcb-dscp'

Oleksij Rempel says:

====================
add DCB and DSCP support for KSZ switches

This patch series is aimed at improving support for DCB (Data Center
Bridging) and DSCP (Differentiated Services Code Point) on KSZ switches.

The main goal is to introduce global DSCP and PCP (Priority Code Point)
mapping support, addressing the limitation of KSZ switches not having
per-port DSCP priority mapping. This involves extending the DSA
framework with new callbacks for managing trust settings for global DSCP
and PCP maps. Additionally, we introduce IEEE 802.1q helpers for default
configurations, benefiting other drivers too.

Change logs are in separate patches.

Compared to v6 this series includes some new patches for DSCP global
mapping support and QoS selftest script for KSZ9477 switches.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>