accel/ivpu: Abort all jobs after command queue unregister

With hardware scheduler it is not expected to receive JOB_DONE
notifications from NPU FW for the jobs aborted due to command queue destroy
JSM command.

Remove jobs submitted to unregistered command queue from submitted_jobs_xa
to avoid triggering a TDR in such case.

Add explicit submitted_jobs_lock that protects access to list of submitted
jobs which is now used to find jobs to abort.

Move context abort procedure to separate work queue not to slow down
handling of IPCs or DCT requests in case where job abort takes longer,
especially when destruction of the last job of a specific context results
in context release.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-4-maciej.falkowski@linux.intel.com

accel/ivpu: Add API for command queue create/destroy/submit

Implement support for explicit command queue management.
To allow more flexible control over command queues add capabilities
to create, destroy and submit jobs to specific command queues.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-3-maciej.falkowski@linux.intel.com

accel/ivpu: Separate DB ID and CMDQ ID allocations from CMDQ allocation

Move doorbell ID and command queue ID XArray allocations from command
queue memory allocation function. This will allow ID allocations to be
done without the need for actual memory allocation.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-2-maciej.falkowski@linux.intel.com

drm/ssd130x: Set SPI .id_table to prevent an SPI core warning

The only reason for the ssd130x-spi driver to have an spi_device_id table
is that the SPI core always reports an "spi:" MODALIAS, even when the SPI
device has been registered via a Device Tree Blob.

Without spi_device_id table information in the module's metadata, module
autoloading would not work because there won't be an alias that matches
the MODALIAS reported by the SPI core.

This spi_device_id table is not needed for device matching though, since
the of_device_id table is always used in this case. For this reason, the
struct spi_driver .id_table member is currently not set in the SPI driver.

Because the spi_device_id table is always required for module autoloading,
the SPI core checks during driver registration that both an of_device_id
table and a spi_device_id table are present and that they contain the same
entries for all the SPI devices.

Not setting the .id_table member in the driver then confuses the core and
leads to the following warning when the ssd130x-spi driver is registered:

  [   41.091198] SPI driver ssd130x-spi has no spi_device_id for sinowealth,sh1106
  [   41.098614] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1305
  [   41.105862] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1306
  [   41.113062] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1307
  [   41.120247] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1309
  [   41.127449] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1322
  [   41.134627] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1325
  [   41.141784] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1327
  [   41.149021] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1331

To prevent the warning, set the .id_table even though it's not necessary.

Since the check is done even for built-in drivers, drop the condition to
only define the ID table when the driver is built as a module. Finally,
rename the variable to use the "_spi_id" convention used for ID tables.

Fixes: 74373977d2ca ("drm/solomon: Add SSD130x OLED displays SPI support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231114516.2063201-1-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>

drm/tests: Add test for drm_atomic_helper_check_modeset()

Add a test for drm_atomic_check_modeset() specifically to validate
drm_atomic_check_valid_clones() helper

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216-concurrent-wb-v4-4-fe220297a7f0@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm: Add valid clones check

Check that all encoders attached to a given CRTC are valid
possible_clones of each other.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216-concurrent-wb-v4-3-fe220297a7f0@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/tests: Add test for drm_crtc_in_clone_mode()

Add kunit test to validate drm_crtc_in_clone_mode() helper

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216-concurrent-wb-v4-2-fe220297a7f0@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm: add clone mode check for CRTC

Add a common helper to check if the given CRTC state is in clone mode.
This can be used by drivers to help detect if a CRTC is being shared by
multiple encoders

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216-concurrent-wb-v4-1-fe220297a7f0@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/tests: Add test for drm_atomic_helper_commit_modeset_disables()

Add a subtest to check that modeset is called when the connector is
changed

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211-abhinavk-modeset-fix-v3-2-0de4bf3e7c32@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm: allow encoder mode_set even when connectors change for crtc

In certain use-cases, a CRTC could switch between two encoders
and because the mode being programmed on the CRTC remains
the same during this switch, the CRTC's mode_changed remains false.
In such cases, the encoder's mode_set also gets skipped.

Skipping mode_set on the encoder for such cases could cause an issue
because even though the same CRTC mode was being used, the encoder
type could have changed like the CRTC could have switched from a
real time encoder to a writeback encoder OR vice-versa.

Allow encoder's mode_set to happen even when connectors changed on a
CRTC and not just when the mode changed.

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211-abhinavk-modeset-fix-v3-1-0de4bf3e7c32@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge: ti-sn65dsi86: Fix multiple instances

Each bridge instance creates up to four auxiliary devices with different
names.  However, their IDs are always zero, causing duplicate filename
errors when a system has multiple bridges:

    sysfs: cannot create duplicate filename '/bus/auxiliary/devices/ti_sn65dsi86.gpio.0'

Fix this by using a unique instance ID per bridge instance.  The
instance ID is derived from the I2C adapter number and the bridge's I2C
address, to support multiple instances on the same bus.

Fixes: bf73537f411b ("drm/bridge: ti-sn65dsi86: Break GPIO and MIPI-to-eDP bridge into sub-drivers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7a68a0e3f927e26edca6040067fb653eb06efb79.1733840089.git.geert+renesas@glider.be

drm/nouveau: vendor in drm_encoder_slave API

Nouveau driver is the only user of the drm_encoder_slave API. Rework
necessary bits of drm_encoder_slave into the nouveau_i2c_encoder API and
drop drm_encoder_slave.c from the DRM KMS helper.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106-nouveau-encoder-slave-v3-2-1d37d2f2c67f@linaro.org

drm/nouveau: incorporate I2C TV encoder drivers

Chrontel CH7006 and Silicon Image sil164 drivers use drm_encoder_slave
interface which is being used only by the nouveau driver. It doesn't
make sense to keep this interface inside the DRM subsystem. In
preparation to moving this set of helpers to the nouveau driver, move
the only two I2C driver that use that interface to the nouveau driver
too.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106-nouveau-encoder-slave-v3-1-1d37d2f2c67f@linaro.org

drm/connector: make mode_valid take a const struct drm_display_mode

The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.

Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/connector: make mode_valid_ctx take a const struct drm_display_mode

The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid_ctx
callback of drm_connector to also take a const argument.

Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-4-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/sti: hda: pass const struct drm_display_mode* to hda_get_mode_idx()

Make hda_get_mode_idx() take a const struct drm_display_mode pointer
instead of just raw struct drm_display_mode. This is a preparation to
converting the mode_valid() callback of drm_connector to take a const
struct drm_display_mode argument.

Acked-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-3-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()

Make amdgpu_dm_connector_mode_valid() duplicate the mode during the
test rather than modifying the passed mode. This is a preparation to
converting the mode_valid() callback of drm_connector to take a const
struct drm_display_mode argument.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-2-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/encoder_slave: make mode_valid accept const struct drm_display_mode

The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
accept const struct drm_display_mode argument. Change the mode_valid
callback of drm_encoder_slave to also accept const argument.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-1-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/ci: uprev IGT

Uprev IGT to the latest version and update expectation files.

Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217160655.2371138-1-vignesh.raman@collabora.com

drm/rockchip: dw_hdmi_qp: Add basic RK3576 HDMI output support

The HDMI on RK3576 shares the same IP block (PHY and Controller)
with rk3588.
However, there are some control bits scattered in different GRF.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231094425.253398-4-andyshrk@163.com

dt-bindings: display: rockchip: Add rk3576 hdmi controller

RK3576 HDMI TX Controller is very similar to that of RK3588, but
with some control bits for IO and interrupts status scattered across
different GRF.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231094425.253398-3-andyshrk@163.com

drm/rockchip: dw_hdmi_qp: Add platform ctrl callback

There are some control bits for IO and interrupts status scattered
across different GRF on differt SOC.
Add platform callback for this IO setting and interrupts status
handling.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231094425.253398-2-andyshrk@163.com

drm: xlnx: zynqmp_dpsub: Fix kernel doc

Fix two kernel doc warnings introduced by the recent DP audio patch:

- Add a doc line for the new "audio" field
- Remove a reference to zynqmp_dpsub.c from zynqmp.rst, as the .c file
  no longer has structured comments

Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support")
Closes: https://lore.kernel.org/all/20241220154208.720d990b@canb.auug.org.au/
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220-xilinx-dp-audio-doc-fix-v1-1-cc488996e463@ideasonboard.com

drm/rockchip: vop2: Support 32x8 superblock afbc

This is the only afbc format supported by the upcoming
VOP for rk3576.

Add support for it.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231090802.251787-2-andyshrk@163.com

drm/vc4: hdmi: use drm_atomic_helper_connector_hdmi_hotplug()

Use the helper function to update the connector's information. This
makes sure that HDMI-related events are handled in a generic way.
Currently it is limited to the HDMI state reporting to the sound system.

Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-10-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/vc4: hdmi: stop rereading EDID in get_modes()

The vc4_hdmi_connector_detect_ctx() via vc4_hdmi_handle_hotplug()
already reads EDID and propagates it to the drm_connector. Stop
rereading EDID as a part of the .get_modes() callback and just update
the list of modes. This matches the behaviour of the i915 driver.

Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-9-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/vc4: hdmi: switch to using generic HDMI Codec infrastructure

Drop driver-specific implementation and use the generic HDMI Codec
framework in order to implement the HDMI audio support.

Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-8-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge_connector: hook drm_atomic_helper_connector_hdmi_hotplug()

Extend drm_bridge_connector code to read the EDID and use it to update
connector status if the bridge chain implements HDMI bridge. Performing
it from the generic location minimizes individual bridge's code and
enforces standard behaviour from all corresponding drivers.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-7-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/display/hdmi: implement hotplug functions

The HDMI Connectors need to perform a variety of tasks when the HDMI
connector state changes. Such tasks include setting or invalidating CEC
address, notifying HDMI codec driver, updating scrambler data, etc.

Implementing such tasks in a driver-specific callbacks is error prone.
Start implementing the generic helper function (currently handling only
the HDMI Codec framework) to be used by drivers utilizing HDMI Connector
framework.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-6-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge: lt9611: switch to using the DRM HDMI codec framework

Make the Lontium LT9611 DSI-to-HDMI bridge driver use the DRM HDMI Codec
framework. This enables programming of Audio InfoFrames using the HDMI
Connector interface and also enables support for the missing features,
including the ELD retrieval and better hotplug support.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-5-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge: connector: add support for HDMI codec framework

Add necessary glue code to be able to use new HDMI codec framework from
the DRM bridge drivers. The drm_bridge implements a limited set of the
hdmi_codec_ops interface, with the functions accepting both
drm_connector and drm_bridge instead of just a generic void pointer.

This framework is integrated with the DRM HDMI Connector framework, but
can also be used for DisplayPort connectors.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-4-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/connector: implement generic HDMI audio helpers

Several DRM drivers implement HDMI codec support (despite its name it
applies to both HDMI and DisplayPort drivers). Implement generic
framework to be used by these drivers. This removes a requirement to
implement get_eld() callback and provides default implementation for
codec's plug handling.

Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-3-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

ASoC: hdmi-codec: move no_capture_mute to struct hdmi_codec_pdata

The no_capture_mute flag might differ from platform to platform,
especially in the case of the wrapping implementations, like the
upcoming DRM HDMI Codec framework. Move the flag next to all other flags
in struct hdmi_codec_pdata.

Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-2-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

ASoC: hdmi-codec: pass data to get_dai_id too

The upcoming DRM connector HDMI codec implementation is going to use
codec-specific data in the .get_dai_id to get drm_connector. Pass data
to the callback, as it is done with other hdmi_codec_ops callbacks.

Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-1-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

accel/amdxdna: Declare npu6_dev_priv as static

Fix sparse warning:
  symbol 'npu6_dev_priv' was not declared. Should it be static?

Fixes: 273b5176ac17 ("accel/amdxdna: Add RyzenAI-npu6 support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412311819.9mz11Uak-lkp@intel.com/
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250102212244.1586340-7-lizhi.hou@amd.com

accel/amdxdna: Add __user to second parameter of aie2_query_status

The second parameter of aie2_query_status() is a userspace pointer.
Declaring it as 'char __user *' to fix sparse warning.

Fixes: 850d71f6bf4c ("accel/amdxdna: Add query functions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412311655.YBvq2wJb-lkp@intel.com/
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250102212244.1586340-6-lizhi.hou@amd.com

accel/amdxdna: Declare force_cmdlist as static

Fix sparse warning:
  symbol 'force_cmdlist' was not declared. Should it be static?

Fixes: aac243092b70 ("accel/amdxdna: Add command execution")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412311448.GKQj7uPZ-lkp@intel.com/
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250102212244.1586340-5-lizhi.hou@amd.com

accel/amdxdna: Use rcu_access_pointer for __rcu pointer

Use rcu_access_pointer for pid in struct drm_file. This fixes sparse
warning.

Fixes: be462c97b7df ("accel/amdxdna: Add hardware context")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412311210.LfeHTzLw-lkp@intel.com/
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250102212244.1586340-4-lizhi.hou@amd.com

accel/amdxdna: Declare aie2_max_col as static

Fix the sparse warning:
  symbol 'aie2_max_col' was not declared. Should it be static?

Fixes: c88d3325ae69 ("accel/amdxdna: Add hardware resource solver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412311028.x2UtcSHm-lkp@intel.com/
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250102212244.1586340-3-lizhi.hou@amd.com

accel/amdxdna: Declare mailbox register base as __iomem pointer

Declare mailbox ringbuf_base and mbox_base as 'void __iomem *' to fix
sparse warnings:
  cast removes address space '__iomem' of expression
  incorrect type in argument 2 (different address spaces)

Fixes: b87f920b9344 ("accel/amdxdna: Support hardware mailbox")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412310857.syD1sXXO-lkp@intel.com/
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250102212244.1586340-2-lizhi.hou@amd.com

accel/amdxdna: Declare npu device profile as static variables

Declare the variables as static to fix the sparse warnings:
symbol 'npu5_dev_priv' was not declared. Should it be static?
symbol 'npu1_dev_priv' was not declared. Should it be static?
symbol 'npu4_dev_priv' was not declared. Should it be static?
symbol 'npu2_dev_priv' was not declared. Should it be static?

Fixes: 8c9ff1b181ba ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412310648.dtMHgGem-lkp@intel.com/
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250102212244.1586340-1-lizhi.hou@amd.com

drm/bridge: it6505: add I2C functionality on AUX

DisplayPort AUX protocol supports I2C transport which is capable of
reading EDID or supports MCCS.

In drm_dp_helper, drm_dp_i2c_xfer() packs I2C requests into a
sequence of AUX requests.
it6505_aux_i2c_operation() is implemented to match drm_dp_i2c_xfer()
operactions.
it6505_aux_i2c_transfer() adds I2C functionality
for it6505_aux_transfer().

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-10-e0fdd4844703@ite.corp-partner.google.com

drm/bridge: it6505: fix HDCP CTS KSV list wait timer

HDCP must disabled encryption and restart authentication after
waiting KSV for 5s.
The original method uses a counter in a waitting loop that may
wait much longer than it is supposed to.
Use time_after() for KSV wait timeout.

Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-9-e0fdd4844703@ite.corp-partner.google.com

drm/bridge: it6505: fix HDCP CTS compare V matching

When HDCP negotiation with a repeater device.
Checking SHA V' matching must retry 3 times before restarting HDCP.

Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-8-e0fdd4844703@ite.corp-partner.google.com

drm/bridge: it6505: fix HDCP CTS KSV list read with UNIGRAF DPR-100.

When running the HDCP CTS test with UNIGRAF DPR-100.
KSV list must be read from DP_AUX_HDCP_KSV_FIFO in an AUX request,
and can not separate with multiple read requests.

The AUX operation command "CMD_AUX_GET_KSV_LIST" reads the KSV list
with AUX FIFO and is able to read DP_AUX_HDCP_KSV_FIFO in an AUX request.

Add it6505_get_ksvlist() which uses CMD_AUX_GET_KSV_LIST operation
to read the KSV list.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-7-e0fdd4844703@ite.corp-partner.google.com

drm/bridge: it6505: fix HDCP encryption when R0 ready

When starting HDCP authentication, HDCP encryption should be enabled
when R0'is checked.

Change encryption enables time at R0' ready.
The hardware HDCP engine trigger is changed and the repeater KSV fails
will restart HDCP.

Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-6-e0fdd4844703@ite.corp-partner.google.com

drm/bridge: it6505: fix HDCP Bstatus check

When HDCP is activated,
a DisplayPort source receiving CP_IRQ from the sink
shall check Bstatus from DPCD and process the corresponding value

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-5-e0fdd4844703@ite.corp-partner.google.com

drm/bridge: it6505: Change definition MAX_HDCP_DOWN_STREAM_COUNT

A HDCP source device shall support max downstream to 127 devices.
Change definition MAX_HDCP_DOWN_STREAM_COUNT to 127

KSVs shall save for DRM blocked devices check.
This results in struct it6505 growth by ~0.5 KiB.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-4-e0fdd4844703@ite.corp-partner.google.com

drm/bridge: it6505: add AUX operation for HDCP KSV list read

HDCP KSV list readback can choose to use AUX FIFO or
general data register.
For some DisplayPort devices, the KSV list must be read
in 5 byte boundaries.
The original AUX read command does not support these devices.

The AUX command operation control register "REG_AUX_CMD_REQ" uses b[3:0]
as AUX operacion control, and b[7:4] are status bits and read only.
To change KSV read operation uses "CMD_AUX_NATIVE_READ" from using
the data registers to using AUX FIFO.
The extended command "CMD_AUX_GET_KSV_LIST" is added as
"CMD_AUX_NATIVE_READ" with the 0x10 flag which selects AUX FIFO mode.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-3-e0fdd4844703@ite.corp-partner.google.com

drm/bridge: it6505: improve AUX operation for edid read

The original AUX operation using data registers is limited to 4 bytes.
The AUX operation command CMD_AUX_I2C_EDID_READ uses AUX FIFO and
is capable of reading 16 bytes.
This improves the speed of EDID read.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-2-e0fdd4844703@ite.corp-partner.google.com

drm/bridge: it6505: Change definition of AUX_FIFO_MAX_SIZE

The hardware AUX FIFO is 16 bytes
Change definition of AUX_FIFO_MAX_SIZE to 16

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-1-e0fdd4844703@ite.corp-partner.google.com

drm: Use of_property_present() for non-boolean properties

The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104190636.274926-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

drm/hisilicon/hibmc: add dp module in hibmc

To support DP interface displaying in hibmc driver. Add
a encoder and connector for DP modual. The HPD function
and get_edid function will be add in next series, so temporarily
using 1024x768 as default in hibmc_dp_connector_get_modes()

Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-6-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/hisilicon/hibmc: refactored struct hibmc_drm_private

Refactored struct hibmc_drm_private to separate VGA module from
generic struct.

Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-5-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/hisilicon/hibmc: add dp hw moduel in hibmc driver

Build a dp level that hibmc driver can enable dp by
calling their functions.

Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-4-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/hisilicon/hibmc: add dp link moduel in hibmc drivers

Add link training process functions in this moduel.

Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-3-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/hisilicon/hibmc: add dp aux in hibmc drivers

Add dp aux read/write functions. They are basic functions
and will be used later.

Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-2-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge: dw-hdmi-qp: drop atomic_check() callback

As drm_bridge_connector now provides atomic_check() implementation which
calls drm_atomic_helper_connector_hdmi_check(), drop the duplicating
callback from the bridge driver.

Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210-bridge_hdmi_check-v1-4-a8fdd8c5afa5@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge: lontium-lt9611: drop atomic_check() callback

As drm_bridge_connector now provides atomic_check() implementation which
calls drm_atomic_helper_connector_hdmi_check(), drop the duplicating
callback from the bridge driver.

Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210-bridge_hdmi_check-v1-3-a8fdd8c5afa5@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/bridge: ite-it6263: drop atomic_check() callback

As drm_bridge_connector now provides atomic_check() implementation which
calls drm_atomic_helper_connector_hdmi_check(), drop the duplicating
callback from the bridge driver.

Reviewed-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210-bridge_hdmi_check-v1-2-a8fdd8c5afa5@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/display: bridge_connector: provide atomic_check for HDMI bridges

The bridges using HDMI connector framework have a call to
drm_atomic_helper_connector_hdmi_check() in their atomic_check()
callback. In order to reduce boilerplate and make simplify bridge's
code, use drm_atomic_helper_connector_hdmi_check() to implement
drm_connector.atomic_check() for HDMI bridges.

Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210-bridge_hdmi_check-v1-1-a8fdd8c5afa5@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

MAINTAINERS: Assume maintainership of PL111

Emma Anholt dropped maintainership for PL111 and I
didn't notice it at the time. I've written part of it
and I'm happy to maintain it, list myself as maintainer
and assume active maintainership.

Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219-pl111-maintain-v1-1-c60f57c523cd@linaro.org

drm: panel-simple: support TOPLAND TIAN G07017 LCD panel

The TIAN-G07017-01 is a 7" TFT-LCD module by TOPLAND ELECTRONICS (H.K).
The panel features 1024x600 24-bit RGB pixels driven over LVDS as well
as a PWM backlight and I2C-connected ft5506-compatible capacitive touch.

The panel description is taken from the Datasheet V0 (2024.5.23), but
it lists no timings and these were provided by the vendor separately.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241218-topland-tian-g07017-v1-3-d5e411c199e3@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218-topland-tian-g07017-v1-3-d5e411c199e3@pengutronix.de

dt-bindings: display: panel-simple: Document Topland TIAN-G07017-01

The TIAN-G07017-01 is a 7" TFT-LCD module by TOPLAND ELECTRONICS (H.K).
Add its compatible string.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241218-topland-tian-g07017-v1-2-d5e411c199e3@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218-topland-tian-g07017-v1-2-d5e411c199e3@pengutronix.de

dt-bindings: vendor-prefixes: add prefix for Topland Electronics (H.K)

Topland is a professional supplier of photoelectric display and touch
integrated products from Hong Kong: https://www.topland.com.hk/aboutus/

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241218-topland-tian-g07017-v1-1-d5e411c199e3@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218-topland-tian-g07017-v1-1-d5e411c199e3@pengutronix.de

drm/bridge:anx7625: Update HDCP content status

When user enabled HDCP feature, userspace will set HDCP content
to DRM_MODE_CONTENT_PROTECTION_DESIRED. Next, anx7625 will update
HDCP content to DRM_MODE_CONTENT_PROTECTION_ENABLED if down stream
support HDCP feature.

As anx7625 bridge IC will be power down after call .atomic_disable(),
then all HDCP status will be lost on chip. So we should reestablish
HDCP again in .atomic_enable(), and update hdcp content to DESIRE if
current HDCP content is ENABLE in .atomic_disable().

v4:
 - Change HDCP content value to DESIRED if HDCP status is ENABLE in bridge
interface .atomic_enable().

v3:
 - Move hdcp content value checking from bridge interface
.atomic_check() to .atomic_enable()

v2:
 - Add more details in commit message

Signed-off-by: Xin Ji <xji@analogixsemi.com>
Tested-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241219070330.224996-1-xji@analogixsemi.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219070330.224996-1-xji@analogixsemi.com

drm/amdgpu: track bo memory stats at runtime

Before, every time fdinfo is queried we try to lock all the BOs in the
VM and calculate memory usage from scratch. This works okay if the
fdinfo is rarely read and the VMs don't have a ton of BOs. If either of
these conditions is not true, we get a massive performance hit.

In this new revision, we track the BOs as they change states. This way
when the fdinfo is queried we only need to take the status lock and copy
out the usage stats with minimal impact to the runtime performance. With
this new approach however, we would no longer be able to track active
buffers.

Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-6-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/amdgpu: remove unused function parameter

amdgpu_vm_bo_invalidate doesn't use the adev parameter and not all
callers have a reference to adev handy, so remove it for cleanliness.

Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-5-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

Documentation/gpu: Clarify drm memory stats definition

Define how to handle buffers with multiple possible placement so we
don't get incompatible implementations. Callout the resident requirement
for drm-purgeable- explicitly. Remove the requirement for there to be
only drm-memory- or only drm-resident-, it's not what's implemented and
having both is better for back-compat. Also re-order the paragraphs to
flow better.

Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-4-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm: make drm-active- stats optional

When memory stats is generated fresh everytime by going though all the
BOs, their active information is quite easy to get. But if the stats are
tracked with BO's state this becomes harder since the job scheduling
part doesn't really deal with individual buffers.

Make drm-active- optional to enable amdgpu to switch to the second
method.

Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-3-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm: add drm_memory_stats_is_zero

Add a helper to check if the memory stats is zero, this will be used to
check for memory accounting errors.

Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-2-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/sched: Fix drm_sched_fini() docu generation

Commit baf4afc5831438 ("drm/sched: Improve teardown documentation")
documents problems of drm_sched_fini() in form of a list. The checklist
triggers htmldocs warning (but renders correctly in htmldocs output):

Documentation/gpu/drm-mm:571: ./drivers/gpu/drm/scheduler/sched_main.c:1359: ERROR: Unexpected indentation.

Separate the list from the preceding paragraph by a blank line to fix
the warning. While at it, also end the aforementioned paragraph by a
colon.

Fixes: baf4afc58314 ("drm/sched: Improve teardown documentation")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20241108175655.6d3fcfb7@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
[phasta: Adjust commit message]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217034915.62594-1-bagasdotme@gmail.com

drm/bridge: synopsys: Fix Copyright Writing Style of dw-hdmi-qp

The standard writing style should be: Co., Ltd.
This fix the mail server warning:
DBL_SPAM(6.50)[co.ltd:url];

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241216101015.3726517-1-andyshrk@163.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216101015.3726517-1-andyshrk@163.com

drm/bridge: ti-sn65dsi83: Add ti,lvds-vod-swing optional properties

Add a optional properties to change LVDS output voltage. This should not
be static as this depends mainly on the connected display voltage
requirement. We have three properties:
- "ti,lvds-termination-ohms", which sets near end termination,
- "ti,lvds-vod-swing-data-microvolt" and
- "ti,lvds-vod-swing-clock-microvolt" which both set LVDS differential
output voltage for data and clock lanes. They are defined as an array
with min and max values. The appropriate bitfield will be set if
selected constraints can be met.

If "ti,lvds-termination-ohms" is not defined the default of 200 Ohm near
end termination will be used. Selecting only one:
"ti,lvds-vod-swing-data-microvolt" or
"ti,lvds-vod-swing-clock-microvolt" can be done, but the output voltage
constraint for only data/clock lanes will be met. Setting both is
recommended.

Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241216085410.1968634-3-andrej.picej@norik.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216085410.1968634-3-andrej.picej@norik.com

dt-bindings: drm/bridge: ti-sn65dsi83: Add properties for ti,lvds-vod-swing

Add properties which can be used to specify LVDS differential output
voltage. Since this also depends on near-end signal termination also
include property which sets this. LVDS differential output voltage is
specified with an array (min, max), which should match the one from
connected device.

Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241216085410.1968634-2-andrej.picej@norik.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216085410.1968634-2-andrej.picej@norik.com

drm: xlnx: zynqmp_dpsub: Add DP audio support

Add basic DisplayPort audio support.

Support non-live audio playback from two PCMs (DMA channels), and the
volume control in the audio mixer.

As older dtb files may not have the audio DMA channels defined, the
driver will just mark the audio support as disabled if the audio DMA is
missing, and will continue with only display support.

Note: Reset doesn't seem to work (ZYNQMP_DISP_AUD_SOFT_RESET). If we do
a reset, audio playback won't start again even if, afaics, we do set up
all the necessary registers. So, at the moment, resetting the audio
block in dp_dai_hw_free() is commented out.

Tested-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023-xilinx-dp-audio-v4-3-5128881457be@ideasonboard.com

arm64: dts: zynqmp: Add DMA for DP audio

Add the two DMA channels used for the DisplayPort audio to the
zynqmp_dpsub node.

Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023-xilinx-dp-audio-v4-2-5128881457be@ideasonboard.com

dt-bindings: display/xlnx/zynqmp-dpsub: Add audio DMAs

The DP subsystem for ZynqMP supports audio via two channels, and the DP
DMA has dma-engines for those channels. For some reason the DT binding
has not specified those channels, even if the picture included in
xlnx,zynqmp-dpsub.yaml shows "2 x aud" DMAs.

This hasn't caused any issues as the drivers have not supported audio,
and has thus gone unnoticed.

To make it possible to add the audio support to the driver, add the two
audio DMAs to the binding. While strictly speaking this is an ABI break,
there should be no regressions caused by this as we're adding new
entries at the end of the dmas list, and, after the audio support has
been added in "arm64: dts: zynqmp: Add DMA for DP audio",  the driver
will treat the audio DMAs as optional to also support the old bindings.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023-xilinx-dp-audio-v4-1-5128881457be@ideasonboard.com

drm/rockchip: vop2: include rockchip_drm_drv.h

Move rockchip_drm_drv.h in rockchip_drm_vop2.h to fix the follow
sparse warning:

ARCH=arm64 LLVM=1 make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
mrproper defconfig all  -j12

drivers/gpu/drm/rockchip/rockchip_vop2_reg.c:502:24: sparse:
warning: symbol 'vop2_platform_driver' was not declared. Should it
be static?

It is also beneficial for the upcoming support for rk3576.

Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Min-Hua Chen <minhuadotchen@gmail.com>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-8-andyshrk@163.com

drm/rockchip: vop2: Add check for 32 bpp format for rk3588

RK3588 only support DRM_FORMAT_XRGB2101010/XBGR2101010 in afbc mode.

Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-7-andyshrk@163.com

drm/rockchip: vop2: Check linear format for Cluster windows on rk3566/8

The Cluster windows on rk3566/8 only support afbc mode.

Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-6-andyshrk@163.com

drm/rockchip: vop2: Setup delay cycle for Esmart2/3

Each layer needs to set the correct delay cycle to display properly
without unexpected offset on screen.

Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Derek Foreman <derek.foreman@collabora.com>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-5-andyshrk@163.com

drm/rockchip: vop2: Set AXI id for rk3588

There are two AXI bus in vop2, windows attached on the same bus must
have a unique channel YUV and RGB channel ID.

The default IDs will conflict with each other on the rk3588, so they
need to be reassigned.

Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Derek Foreman <derek.foreman@collabora.com>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-4-andyshrk@163.com

accel/amdxdna: include linux/slab.h

This driver fails to build in random configurations:

drivers/accel/amdxdna/aie2_solver.c: In function 'remove_partition_node':
drivers/accel/amdxdna/aie2_solver.c:121:9: error: implicit declaration of function 'kfree' [-Wimplicit-function-declaration]
  121 |         kfree(pt_node);
      |         ^~~~~
drivers/accel/amdxdna/aie2_solver.c: In function 'get_free_partition':
drivers/accel/amdxdna/aie2_solver.c:153:19: error: implicit declaration of function 'kzalloc' [-Wimplicit-function-declaration]
  153 |         pt_node = kzalloc(sizeof(*pt_node), GFP_KERNEL);

Add the missing include.

Fixes: c88d3325ae69 ("accel/amdxdna: Add hardware resource solver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218085902.2684002-1-arnd@kernel.org

drm/panel: simple: add Multi-Inno Technology MI1010Z1T-1CP11

Add Multi-Inno Technology MI1010Z1T-1CP11 10.1" 1024x600 LVDS panel support.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241212122701.25305-2-marex@denx.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212122701.25305-2-marex@denx.de

dt-bindings: display: simple: Document Multi-Inno Technology MI1010Z1T-1CP11 panel

Add Multi-Inno Technology MI1010Z1T-1CP11 10.1" 1024x600 LVDS panel
compatible string.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241212122701.25305-1-marex@denx.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212122701.25305-1-marex@denx.de

drm/panel: simple: Add Tianma TM070JDHG34-00 panel support

Add Tianma TM070JDHG34-00 7.0" 1280x800 LVDS RGB TFT LCD panel.

Panel info and datasheet: https://fortec.us/products/tm070jdhg34-00/

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20241216-tianma_tm070jdhg34-v2-2-0b319a0bac39@bootlin.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216-tianma_tm070jdhg34-v2-2-0b319a0bac39@bootlin.com

dt-bindings: display: simple: Add Tianma TM070JDHG34-00 panel

Add the Tianma Micro-electronics TM070JDHG34-00 7.0" LVDS LCD TFT panel.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241216-tianma_tm070jdhg34-v2-1-0b319a0bac39@bootlin.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216-tianma_tm070jdhg34-v2-1-0b319a0bac39@bootlin.com

drm/bridge: ti-sn65dsi83: use dev_err_probe when failing to get panel bridge

When devm_drm_of_get_bridge() fails, the probe fails silently. Use
dev_err_probe() instead to log an error or report the deferral reason,
whichever is applicable.

Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20241217-ti-sn65dsi83-dev_err_probe-v1-1-3fdce386400c@bootlin.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-ti-sn65dsi83-dev_err_probe-v1-1-3fdce386400c@bootlin.com

accel/amdxdna: Remove DRM_AMDXDNA_HWCTX_CONFIG_NUM

Defining a number of enum elements in uapi header is meaningless. It will
not be used as expected and can potentially lead to incompatible issue
between user space application and driver.

Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217165446.2607585-2-lizhi.hou@amd.com

accel/amdxdna: Add zero check for pad in ioctl input structures

For input ioctl structures, it is better to check if the pad is zero.
Thus, the pad bytes might be usable in the future.

Suggested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217165446.2607585-1-lizhi.hou@amd.com

drm/connector: Allow clearing HDMI infoframes

Our infoframe setting code currently lacks the ability to clear
infoframes. For some of the infoframes, we only need to replace them,
so if an error occurred when generating a new infoframe we would leave
a stale frame instead of clearing the frame.

However, the Dynamic Range and Mastering (DRM) infoframe should only
be present when displaying HDR content (ie: the HDR_OUTPUT_METADATA blob
is set). If we can't clear infoframes, the stale DRM infoframe will
remain and we can never set the display back to SDR mode.

With this change, we clear infoframes when they can not, or should not,
be generated. This fixes switching to an SDR mode from an HDR one.

Fixes: f378b77227bc ("drm/connector: hdmi: Add Infoframes generation")
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202181939.724011-1-derek.foreman@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/tests: Add tests for drm_connector_dynamic_init()/register()

Add kunit tests for
drm_connector_dynamic_init()/drm_connector_dynamic_register() added in
an earlier commit.

v2: Replace the reference to the patchset with "earlier commit". (Jani)

Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-10-imre.deak@intel.com

drm/connector: Warn if a connector is registered/added incorrectly

All the drivers should be converted now to use
drm_connector_dynamic_init() for MST connectors, hence
drm_connector_dynamic_register()->drm_connector_add() can WARN now if
this was not the case (for instance if a driver inited an MST connector
with one of the drm_connector_init*() functions incorrectly).

Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-9-imre.deak@intel.com

drm/nouveau/dp_mst: Expose a connector to kernel users after it's properly initialized

After a connector is added to the drm_mode_config::connector_list, it's
visible to any in-kernel users looking up connectors via the above list.
Make sure that the connector is properly initialized before such
look-ups, by initializing the connector with
drm_connector_dynamic_init() - which doesn't add the connector to the
list - and registering it with drm_connector_dynamic_register() - which
adds the connector to the list - after the initialization is complete.

v2: Fix s/drm_connector_dynamic_register()/drm_connector_dynamic_init()
    typo in the commit log.

Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-8-imre.deak@intel.com

drm/amd/dp_mst: Expose a connector to kernel users after it's properly initialized

After a connector is added to the drm_mode_config::connector_list, it's
visible to any in-kernel users looking up connectors via the above list.
Make sure that the connector is properly initialized before such
look-ups, by initializing the connector with
drm_connector_dynamic_init() - which doesn't add the connector to the
list - and registering it with drm_connector_dynamic_register() - which
adds the connector to the list - after the initialization is complete.

v2: Fix s/drm_connector_dynamic_register()/drm_connector_dynamic_init()
    typo in the commit log.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Wayne Lin <wayne.lin@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-7-imre.deak@intel.com

drm/i915/dp_mst: Expose a connector to kernel users after it's properly initialized

After a connector is added to the drm_mode_config::connector_list, it's
visible to any in-kernel users looking up connectors via the above list.
Make sure that the connector is properly initialized before such
look-ups, by initializing the connector with
drm_connector_dynamic_init() - which doesn't add the connector to the
list - and registering it with drm_connector_dynamic_register() - which
adds the connector to the list - after the initialization is complete.

v2:
- Rebase on the change which moves adding the connector to the
  connector list only later when calling
  drm_connector_dynamic_register().

v3:
- Rebase on drm-misc-next, due to a trivial conflict with
  commit 5503f8112e52 ("drm/i915/mst: unify MST topology callback naming ..."),
  which is only in drm-intel-next.
- Fix s/drm_connector_dynamic_register()/drm_connector_dynamic_init()
  typo in the commit log.

Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-6-imre.deak@intel.com

drm/dp_mst: Register connectors via drm_connector_dynamic_register()

MST connectors should be initialized/registered by calling
drm_connector_dynamic_init()/drm_connector_dynamic_register(). The
commit adding these functions explains the issue with the current
drm_connector_init*()/drm_connector_register() interface for MST
connectors.

Based on the above adjust here the registration part and change the
initialization part in follow-up commits for each driver.

For now, drivers are allowed to keep using the drm_connector_init*()
functions, by drm_connector_dynamic_register() checking for this (see
drm_connector_add()). A commit later will change this to WARN in such
cases.

v2: Replaces references to a "patch" with "commit" in the commit log.
    (Jani)

Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Wayne Lin <wayne.lin@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-5-imre.deak@intel.com

drm/connector: Add deprecation notes for drm_connector_register/unregister

Drivers should register/unregister only dynamic (MST) connectors
manually using drm_connector_dynamic_register()/unregister().
Static connectors are registered/unregistered by the DRM core
automatically. Some drivers still call drm_connector_register()/
unregister() for static connectors, both of which should be a nop
for them and hence are scheduled to be removed. Update the function
documentation for these functions accordingly.

v2: s/deprication/deprecation in subject line. (Jani)

Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-4-imre.deak@intel.com

drm/connector: Add FIXME for GETRESOURCES ioctl wrt. uninited connectors

The connectors enumerated by the GETRESOURCES ioctl may not be fully
initialized yet wrt. to the state set up during connector registration
(for instance the connector's debugfs/sysfs interfaces may not exist
yet). This can happen in two ways:

1. Connectors initialized and added to the
   drm_mode_config::connector_list during driver loading will be visible
   to the GETRESOURCES ioctl caller once the driver is registered via
   drm_dev_register()->drm_minor_register(DRM_MINOR_PRIMARY) and before
   the connectors are registered via drm_dev_register()->
   drm_modeset_register_all().

2. Dynamic connectors (MST) - after being initialized - may be added to
   the connector_list after the driver is loaded and registered and before
   the connector's userspace interfaces (debugfs, sysfs etc.) are added
   in drm_connector_dynamic_register().

A solution for 1. would be to register the driver only after the
connectors are registered, for 2. to add the connector to connector_list
only after the userspace interfaces are registered.

The fix requires a bigger change, for now adding a FIXME: comment for
it.

v2: Remove references to the patchset from the commit log. (Jani)

Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-3-imre.deak@intel.com