iavf: fix error return code in iavf_init_get_resources()

[ Upstream commit 753f3884f253de6b6d3a516e6651bda0baf4aede ]

Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: b66c7bc1cd4d ("iavf: Refactor init state machine")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: vchiq_arm: Add a matching unregister call

[ Upstream commit 5d9272e28a9a6117fb63f5f930991304765caa32 ]

All the registered children of vchiq have a corresponding call to
platform_device_unregister except bcm2835_audio. Fix that.

Fixes: 25c7597af20d ("staging: vchiq_arm: Register a platform device for audio")

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-9-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: fix array out-of-bounds read and write issues

[ Upstream commit 7ee78aff9de13d5dccba133f4a0de5367194b243 ]

There is an off-by-one bounds check on the index into arrays
table->mc_reg_address and table->mc_reg_table_entry[k].mc_data[j] that
can lead to reads and writes outside of arrays. Fix the bound checking
off-by-one error.

Addresses-Coverity: ("Out-of-bounds read/write")
Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: ensure 0 is returned for success in jpeg_v2_5_wait_for_idle

[ Upstream commit 57f01856645afe4c3d0f9915ee2bb043e8dd7982 ]

In the cases where adev->jpeg.num_jpeg_inst is zero or the condition
adev->jpeg.harvest_config & (1 << i) is always non-zero the variable
ret is never set to an error condition and the function returns
an uninitialized value in ret.  Since the only exit condition at
the end if the function is a success then explicitly return
0 rather than a potentially uninitialized value in ret.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 14f43e8f88c5 ("drm/amdgpu: move JPEG2.5 out from VCN2.5")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Move pipe reference to trace array instead of current_tracer

[ Upstream commit 7ef282e05132d56b6f6b71e3873f317664bea78b ]

If a process has the trace_pipe open on a trace_array, the current tracer
for that trace array should not be changed. This was original enforced by a
global lock, but when instances were introduced, it was moved to the
current_trace. But this structure is shared by all instances, and a
trace_pipe is for a single instance. There's no reason that a process that
has trace_pipe open on one instance should prevent another instance from
changing its current tracer. Move the reference counter to the trace_array
instead.

This is marked as "Fixes" but is more of a clean up than a true fix.
Backport if you want, but its not critical.

Fixes: cf6ab6d9143b1 ("tracing: Add ref count to tracer for when they are being read by pipe")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: am65-cpsw-nuss: restore vlan configuration while down/up

[ Upstream commit 7bcffde02152dd3cb180f6f3aef27e8586b2a905 ]

The vlan configuration is not restored after interface down/up sequence.

Steps to check:
 # ip link add link eth0 name eth0.100 type vlan id 100
 # ifconfig eth0 down
 # ifconfig eth0 up

This patch fixes it, restoring vlan ALE entries on .ndo_open().

Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lkdtm: Make arch-specific tests always available

[ Upstream commit ae56942c14740c2963222efdc36c667ab19555ef ]

I'd like arch-specific tests to XFAIL when on a mismatched architecture
so that we can more easily compare test coverage across all systems.
Lacking kernel configs or CPU features count as a FAIL, not an XFAIL.

Additionally fixes a build failure under 32-bit UML.

Fixes: b09511c253e5 ("lkdtm: Add a DOUBLE_FAULT crash type on x86")
Fixes: cea23efb4de2 ("lkdtm/bugs: Make double-fault test always available")
Fixes: 6cb6982f42cb ("lkdtm: arm64: test kernel pointer authentication")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200625203704.317097-5-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/lkdtm: Reset WARN_ONCE to avoid false negatives

[ Upstream commit 4fccc8c0ff740e62343b6de38426a48b345b95f4 ]

Since we expect to see warnings every time for many tests, just reset
the WARN_ONCE flags each time the script runs.

Fixes: 46d1a0f03d66 ("selftests/lkdtm: Add tests for LKDTM targets")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200625203704.317097-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lkdtm: Avoid more compiler optimizations for bad writes

[ Upstream commit 464e86b4abadfc490f426954b431e2ec6a9d7bd2 ]

It seems at least Clang is able to throw away writes it knows are
destined for read-only memory, which makes things like the WRITE_RO test
fail, as the write gets elided. Instead, force the variable to be
volatile, and make similar changes through-out other tests in an effort
to avoid needing to repeat fixing these kinds of problems. Also includes
pr_err() calls in failure paths so that kernel logs are more clear in
the failure case.

Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Fixes: 9ae113ce5faf ("lkdtm: add tests for additional page permissions")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200625203704.317097-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl: Fix kobject memleak

[ Upstream commit 85c5cbeba8f4fb28e6b9bfb3e467718385f78f76 ]

Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking
the kobject.

Fix it by adding a call to kobject_put() in the error path of
kobject_init_and_add().

Fixes: b087e6190ddc ("cxl: Export optional AFU configuration record in sysfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Link: https://lore.kernel.org/r/20200602120733.5943-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mipi: use dcs write for mipi_dsi_dcs_set_tear_scanline

[ Upstream commit 7a05c3b6d24b8460b3cec436cf1d33fac43c8450 ]

The helper uses the MIPI_DCS_SET_TEAR_SCANLINE, although it's currently
using the generic write. This does not look right.

Perhaps some platforms don't distinguish between the two writers?

Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Vinay Simha BN <simhavcs@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Fixes: e83950816367 ("drm/dsi: Implement set tear scanline")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-3-emil.l.velikov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: cumana_2: Fix different dev_id between request_irq() and free_irq()

[ Upstream commit 040ab9c4fd0070cd5fa71ba3a7b95b8470db9b4d ]

The dev_id used in request_irq() and free_irq() should match.  Use 'info'
in both cases.

Link: https://lore.kernel.org/r/20200625204730.943520-1-christophe.jaillet@wanadoo.fr
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: atlantic: MACSec offload statistics checkpatch fix

[ Upstream commit 3a8b44546979cf682324bd2fd61e539f428911b4 ]

This patch fixes a checkpatch warning.

Fixes: aec0f1aac58e ("net: atlantic: MACSec offload statistics implementation")

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bxt_rt298: add missing .owner field

[ Upstream commit 88cee34b776f80d2da04afb990c2a28c36799c43 ]

This field is required for ASoC cards. Not setting it will result in a
module->name pointer being NULL and generate problems such as

cat /proc/asound/modules
 0 (efault)

Fixes: 76016322ec56 ('ASoC: Intel: Add Broxton-P machine driver')
Reported-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw: add missing .owner field

[ Upstream commit fb4b42f68972d6bc905c8b6e21a43a490dedfca7 ]

This field is required for ASoC cards. Not setting it will result in a
module->name pointer being NULL and generate problems such as

cat /proc/asound/modules
 0 (efault)

Fixes: 52db12d193d4 ('ASoC: Intel: boards: add sof_sdw machine driver')
Reported-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: cml_rt1011_rt5682: add missing .owner field

[ Upstream commit 299120928897d6cb893c7165df7cd232d835e259 ]

This field is required for ASoC cards. Not setting it will result in a
module->name pointer being NULL and generate problems such as

cat /proc/asound/modules
 0 (efault)

Fixes: 17fe95d6df93 ('ASoC: Intel: boards: Add CML m/c using RT1011 and RT5682')
Reported-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: nocodec: add missing .owner field

[ Upstream commit 8753889e2720c1ef7ebf03370e384f5bf5ff4fab ]

This field is required for ASoC cards. Not setting it will result in a
module->name pointer being NULL and generate problems such as

cat /proc/asound/modules
 0 (efault)

Fixes: 8017b8fd37bf ('ASoC: SOF: Add Nocodec machine driver support')
Reported-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa2-eth: fix condition for number of buffer acquire retries

[ Upstream commit 0e5ad75b02d9341eb9ca22627247f9a02cc20d6f ]

We should keep retrying to acquire buffers through the software portals
as long as the function returns -EBUSY and the number of retries is
__below__ DPAA2_ETH_SWP_BUSY_RETRIES.

Fixes: ef17bd7cc0c8 ("dpaa2-eth: Avoid unbounded while loops")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: most: avoid null pointer dereference when iface is null

[ Upstream commit e4463e49e29f43eecec86e2e2b2e2ab4feb7d867 ]

In the case where the pointer iface is null then the reporting of this
error will dereference iface when printing an error message causing which
is not ideal.  Since the majority of callers to most_register_interface
report an error when -EINVAL is returned a simple fix is to just remove
the error message, I doubt it will be missed.

Addresses-Coverity: ("Dereference after null check")
Fixes: 57562a72414c ("Staging: most: add MOST driver's core module")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200624163957.11676-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: omap3isp: Add missed v4l2_ctrl_handler_free() for preview_init_entities()

[ Upstream commit dc7690a73017e1236202022e26a6aa133f239c8c ]

preview_init_entities() does not call v4l2_ctrl_handler_free() when
it fails.
Add the missed function to fix it.

Fixes: de1135d44f4f ("[media] omap3isp: CCDC, preview engine and resizer")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: marvell-ccic: Add missed v4l2_async_notifier_cleanup()

[ Upstream commit 4603a5b4a87ccd6fb90cbfa10195291cfcf6ba34 ]

mccic_register() forgets to cleanup the notifier in its error handler.
mccic_shutdown() also misses calling v4l2_async_notifier_cleanup().
Add the missed calls to fix them.

Fixes: 3eefe36cc00c ("media: marvell-ccic: use async notifier to get the sensor")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cxusb-analog: fix V4L2 dependency

[ Upstream commit 1a55caf010c46d4f2073f9e92e97ef65358c16bf ]

CONFIG_DVB_USB_CXUSB_ANALOG is a 'bool' symbol with a dependency on the
tristate CONFIG_VIDEO_V4L2, which means it can be enabled as =y even
when its dependency is =m. This leads to a link failure:

drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_analog_init':
cxusb-analog.c:(.text+0x92): undefined reference to `v4l2_subdev_call_wrappers'
drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_register_analog':
cxusb-analog.c:(.text+0x466): undefined reference to `v4l2_device_register'
cxusb-analog.c:(.text+0x4c3): undefined reference to `v4l2_i2c_new_subdev'
cxusb-analog.c:(.text+0x4fb): undefined reference to `v4l2_subdev_call_wrappers'
...

Change the dependency only disallow the analog portion of the driver
in that configuration.

Fixes: e478d4054054 ("media: cxusb: add analog mode support for Medion MD95700")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btmtksdio: fix up firmware download sequence

[ Upstream commit 737cd06072a72e8984e41af8e5919338d0c5bf2b ]

Data RAM on the device have to be powered on before starting to download
the firmware.

Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices")
Co-developed-by: Mark Chen <Mark-YW.Chen@mediatek.com>
Signed-off-by: Mark Chen <Mark-YW.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: fix up firmware download sequence

[ Upstream commit f645125711c80f9651e4a57403d799070c6ad13b ]

Data RAM on the device have to be powered on before starting to download
the firmware.

Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices")
Co-developed-by: Mark Chen <Mark-YW.Chen@mediatek.com>
Signed-off-by: Mark Chen <Mark-YW.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: lm355x: avoid enum conversion warning

[ Upstream commit 985b1f596f9ed56f42b8c2280005f943e1434c06 ]

clang points out that doing arithmetic between diffent enums is usually
a mistake:

drivers/leds/leds-lm355x.c:167:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion]
                reg_val = pdata->pin_tx2 | pdata->ntc_pin;
                          ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
drivers/leds/leds-lm355x.c:178:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion]
                reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode;
                          ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~

In this driver, it is intentional, so add a cast to hide the false-positive
warning. It appears to be the only instance of this warning at the moment.

Fixes: b98d13c72592 ("leds: Add new LED driver for lm355x chips")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when page size is 256k

[ Upstream commit 03fd42d458fb9cb69e712600bd69ff77ff3a45a8 ]

FIX_EARLY_DEBUG_BASE reserves a 128k area for debuging.

When page size is 256k, the calculation results in a 0 number of
pages, leading to the following failure:

  CC      arch/powerpc/kernel/asm-offsets.s
In file included from ./arch/powerpc/include/asm/nohash/32/pgtable.h:77:0,
                 from ./arch/powerpc/include/asm/nohash/pgtable.h:8,
                 from ./arch/powerpc/include/asm/pgtable.h:20,
                 from ./include/linux/pgtable.h:6,
                 from ./arch/powerpc/include/asm/kup.h:42,
                 from ./arch/powerpc/include/asm/uaccess.h:9,
                 from ./include/linux/uaccess.h:11,
                 from ./include/linux/crypto.h:21,
                 from ./include/crypto/hash.h:11,
                 from ./include/linux/uio.h:10,
                 from ./include/linux/socket.h:8,
                 from ./include/linux/compat.h:15,
                 from arch/powerpc/kernel/asm-offsets.c:14:
./arch/powerpc/include/asm/fixmap.h:75:2: error: overflow in enumeration values
  __end_of_permanent_fixed_addresses,
  ^
make[2]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1

Ensure the debug area is at least one page.

Fixes: b8e8efaa8639 ("powerpc: reserve fixmap entries for early debug")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ca8c9f8249f523b1fab873e67b81b11989d46553.1592207216.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mm: Fix typo in IS_ENABLED()

[ Upstream commit 55bd9ac468397c4f12a33b7ec714b5d0362c3aa2 ]

IS_ENABLED() matches names exactly, so the missing "CONFIG_" prefix
means this code would never be built.

Also fixes a missing newline in pr_warn().

Fixes: 970d54f99cea ("powerpc/book3s64/hash: Disable 16M linear mapping size if not aligned")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/202006050717.A2F9809E@keescook
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: bcm63xx-gate: fix last clock availability

[ Upstream commit cf8030d7035bd3e89c9e66f7193a7fc8057a9b9a ]

In order to make the last clock available, maxbit has to be set to the
highest bit value plus 1.

Fixes: 1c099779c1e2 ("clk: add BCM63XX gated clock controller driver")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20200609110846.4029620-1-noltari@gmail.com
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/arm: fix unintentional integer overflow on left shift

[ Upstream commit 5f368ddea6fec519bdb93b5368f6a844b6ea27a6 ]

Shifting the integer value 1 is evaluated using 32-bit arithmetic
and then used in an expression that expects a long value leads to
a potential integer overflow. Fix this by using the BIT macro to
perform the shift to avoid the overflow.

Addresses-Coverity: ("Unintentional integer overflow")
Fixes: ad49f8602fe8 ("drm/arm: Add support for Mali Display Processors")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200618100400.11464-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panfrost: Fix inbalance of devfreq record_busy/idle()

[ Upstream commit b99773ef258e628bd53cab22d450a755b73b4d55 ]

The calls to panfrost_devfreq_record_busy() and
panfrost_devfreq_record_idle() must be balanced to ensure that the
devfreq utilisation is correctly reported. But there are two cases where
this doesn't work correctly.

In panfrost_job_hw_submit() if pm_runtime_get_sync() fails or the
WARN_ON() fires then no call to panfrost_devfreq_record_busy() is made,
but when the job times out the corresponding _record_idle() call is
still made in panfrost_job_timedout(). Move the call up to ensure that
it always happens.

Secondly panfrost_job_timedout() only makes a single call to
panfrost_devfreq_record_idle() even if it is cleaning up multiple jobs.
Move the call inside the loop to ensure that the number of
_record_idle() calls matches the number of _record_busy() calls.

Fixes: 9e62b885f715 ("drm/panfrost: Simplify devfreq utilisation tracking")
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200522153653.40754-1-steven.price@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/etnaviv: Fix error path on failure to enable bus clk

[ Upstream commit f8794feaf65cdc97767604cf864775d20b97f397 ]

Since commit 65f037e8e908 ("drm/etnaviv: add support for slave interface
clock") the reg clock is enabled before the bus clock and we need to undo
its enablement on error.

Fixes: 65f037e8e908 ("drm/etnaviv: add support for slave interface clock")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix imprecise load calculation in devfreq window

[ Upstream commit b1bf66d1d5a8fcb54f0e584db5d196ef015b5172 ]

The UFS load calculation is based on "total_time" and "busy_time" in a
devfreq window.  However, the source of time is different for both
parameters: "busy_time" is assigned from "jiffies" thus has different
accuracy from "total_time" which is assigned from ktime_get().

In addition, the time of window boundary is not exactly the same as the
starting busy time in this window if UFS is actually busy in the beginning
of the window. A similar accuracy error may also happen for the end of busy
time in current window.

To guarantee the precision of load calculation, we need to

1. Align time accuracy of both devfreq_dev_status.total_time and
   devfreq_dev_status.busy_time. For example, use "ktime_get()" directly.

2. Align the following timelines:
   - The beginning time of devfreq windows
   - The beginning of busy time in a new window
   - The end of busy time in the current window

Link: https://lore.kernel.org/r/20200611101043.6379-1-stanley.chu@mediatek.com
Fixes: a3cd5ec55f6c ("scsi: ufs: add load based scaling of UFS gear")
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: amplifiers: ad8366: Change devm_gpiod_get() to optional and add the missed check

[ Upstream commit 9ca39411f9a9c833727750431da8dfd96ff80005 ]

Since if there is no GPIO, nothing happens, replace devm_gpiod_get()
with devm_gpiod_get_optional().
Also add IS_ERR() to fix the missing-check warning.

Fixes: cee211f4e5a0 ("iio: amplifiers: ad8366: Add support for the ADA4961 DGA")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: improve IIO_CONCENTRATION channel type description

[ Upstream commit df16c33a4028159d1ba8a7061c9fa950b58d1a61 ]

IIO_CONCENTRATION together with INFO_RAW specifier is used for reporting
raw concentrations of pollutants. Raw value should be meaningless
before being properly scaled. Because of that description shouldn't
mention raw value unit whatsoever.

Fix this by rephrasing existing description so it follows conventions
used throughout IIO ABI docs.

Fixes: 8ff6b3bc94930 ("iio: chemical: Add IIO_CONCENTRATION channel type")
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_qca: Increase SoC idle timeout to 200ms

[ Upstream commit 2d68476cfc2afa1a1a2d9007a23264ffc6308e77 ]

In some version of WCN399x, SoC idle timeout is configured
as 80ms instead of 20ms or 40ms. To honor all the SoC's
supported in the driver increasing SoC idle timeout to 200ms.

Fixes: 41d5b25fed0a0 ("Bluetooth: hci_qca: add PM support")
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_qca: Bug fix during SSR timeout

[ Upstream commit f98aa80ff78c34fe328eb9cd3e2cc3058e42bcfd ]

Due to race conditions between qca_hw_error and qca_controller_memdump
during SSR timeout,the same pointer is freed twice. This results in a
double free. Now a lock is acquired before checking the stauts of SSR
state.

Fixes: d841502c79e3 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Acquire tx_lock in tx error paths

[ Upstream commit a738e766e3ed92c4ee5ec967777276b5ce11dd2c ]

ath10k_htt_tx_free_msdu_id() has a lockdep assertion that htt->tx_lock
is held. Acquire the lock in a couple of error paths when calling that
function to ensure this condition is met.

Fixes: 6421969f248fd ("ath10k: refactor tx pending management")
Fixes: e62ee5c381c59 ("ath10k: Add support for htt_data_tx_desc_64 descriptor")
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200604105901.1.I5b8b0c7ee0d3e51a73248975a9da61401b8f3900@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Allow suspend even when preparation has failed

[ Upstream commit a9ec8423134a54c9f0ae8d4ef59e1e833ca917c2 ]

It is preferable to allow suspend even when Bluetooth has problems
preparing for sleep. When Bluetooth fails to finish preparing for
suspend, log the error and allow the suspend notifier to continue
instead.

To also make it clearer why suspend failed, change bt_dev_dbg to
bt_dev_err when handling the suspend timeout.

Fixes: dd522a7429b07e ("Bluetooth: Handle LE devices during suspend")
Reported-by: Len Brown <len.brown@intel.com>
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_qca: Only remove TX clock vote after TX is completed

[ Upstream commit eff981f6579d5797d68d27afc0eede529ac8778a ]

qca_suspend() removes the vote for the UART TX clock after
writing an IBS sleep request to the serial buffer. This is
not a good idea since there is no guarantee that the request
has been sent at this point. Instead remove the vote after
successfully entering IBS sleep. This also fixes the issue
of the vote being removed in case of an aborted suspend due
to a failure of entering IBS sleep.

Fixes: 41d5b25fed0a0 ("Bluetooth: hci_qca: add PM support")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_qca: Fix an error pointer dereference

[ Upstream commit 4c07a5d7aeb39f559b29aa58ec9a8a5ab4282cb0 ]

When a function like devm_clk_get_optional() function returns both error
pointers on error and NULL then the NULL return means that the optional
feature is deliberately disabled.  It is a special sort of success and
should not trigger an error message.  The surrounding code should be
written to check for NULL and not crash.

On the other hand, if we encounter an error, then the probe from should
clean up and return a failure.

In this code, if devm_clk_get_optional() returns an error pointer then
the kernel will crash inside the call to:

clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);

The error handling must be updated to prevent that.

Fixes: 77131dfec6af ("Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: pxafb: Fix the function used to balance a 'dma_alloc_coherent()' call

[ Upstream commit 499a2c41b954518c372873202d5e7714e22010c4 ]

'dma_alloc_coherent()' must be balanced by a call to 'dma_free_coherent()'
not 'dma_free_wc()'.
The correct dma_free_ function is already used in the error handling path
of the probe function.

Fixes: 77e196752bdd ("[ARM] pxafb: allow video memory size to be configurable")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Jani Nikula <jani.nikula@intel.com>
cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429084505.108897-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

console: newport_con: fix an issue about leak related system resources

[ Upstream commit fd4b8243877250c05bb24af7fea5567110c9720b ]

A call of the function do_take_over_console() can fail here.
The corresponding system resources were not released then.
Thus add a call of iounmap() and release_mem_region()
together with the check of a failure predicate. and also
add release_mem_region() on device removal.

Fixes: e86bb8acc0fdc ("[PATCH] VT binding: Make newport_con support binding")
Suggested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423164251.3349-1-zhengdejin5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: sm712fb: fix an issue about iounmap for a wrong address

[ Upstream commit 98bd4f72988646c35569e1e838c0ab80d06c77f6 ]

the sfb->fb->screen_base is not save the value get by iounmap() when
the chip id is 0x720. so iounmap() for address sfb->fb->screen_base
is not right.

Fixes: 1461d6672864854 ("staging: sm7xxfb: merge sm712fb with fbdev")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422160719.27763-1-zhengdejin5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

btmrvl: Fix firmware filename for sd8997 chipset

[ Upstream commit 00eb0cb36fad53315047af12e83c643d3a2c2e49 ]

Firmware for sd8997 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8997_combo_v4.bin.

This patch fixes mwifiex driver to load correct firmware file for sd8997.

Fixes: f0ef67485f591 ("Bluetooth: btmrvl: add sd8997 chipset support")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btmrvl: Fix firmware filename for sd8977 chipset

[ Upstream commit dbec3af5f13b88a96e31f252957ae1a82484a923 ]

Firmware for sd8977 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8977_combo_v2.bin.

This patch fixes mwifiex driver to load correct firmware file for sd8977.

Fixes: 8c57983bf7a79 ("Bluetooth: btmrvl: add support for sd8977 chipset")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: Fix firmware filename for sd8997 chipset

[ Upstream commit 2e1fcac52a9ea53e5a13a585d48a29a0fb4a9daf ]

Firmware for sd8997 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8997_combo_v4.bin.

This patch fixes mwifiex driver to load correct firmware file for sd8997.

Fixes: 6d85ef00d9dfe ("mwifiex: add support for 8997 chipset")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: Fix firmware filename for sd8977 chipset

[ Upstream commit 47fd3ee25e13cc5add48ba2ed71f7ee964b9c3a4 ]

Firmware for sd8977 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8977_combo_v2.bin.

This patch fixes mwifiex driver to load correct firmware file for sd8977.

Fixes: 1a0f547831dce ("mwifiex: add support for sd8977 chipset")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

agp/intel: Fix a memory leak on module initialisation failure

[ Upstream commit b975abbd382fe442713a4c233549abb90e57c22b ]

In intel_gtt_setup_scratch_page(), pointer "page" is not released if
pci_dma_mapping_error() return an error, leading to a memory leak on
module initialisation failure.  Simply fix this issue by freeing "page"
before return.

Fixes: 0e87d2b06cb46 ("intel-gtt: initialize our own scratch page")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200522083451.7448-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: use the unlocked drm_gem_object_put

[ Upstream commit 1a87f67a66de4ad0c0d79fd86b6c5273143387c3 ]

The driver does not hold struct_mutex, thus using the locked version of
the helper is incorrect.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: a39414716ca0 ("drm/amdgpu: add independent DMA-buf import v9")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-8-emil.l.velikov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: ti-sn65dsi86: Fix off-by-one error in clock choice

[ Upstream commit fe3d7a35497c807d0dad0642afd87d6ba5b6fc86 ]

If the rate in our table is _equal_ to the rate we want then it's OK
to pick it.  It doesn't need to be greater than the one we want.

Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504213225.1.I21646c7c37ff63f52ae6cdccc9bc829fbc3d9424@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: ti-sn65dsi86: Clear old error bits before AUX transfers

[ Upstream commit baef4d56195b6d6e0f681f6eac03d8c6db011d34 ]

The AUX channel transfer error bits in the status register are latched
and need to be cleared.  Clear them before doing our transfer so we
don't see old bits and get confused.

Without this patch having a single failure would mean that all future
transfers would look like they failed.

Fixes: b814ec6d4535 ("drm/bridge: ti-sn65dsi86: Implement AUX channel")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508163314.1.Idfa69d5d3fc9623083c0ff78572fea87dccb199c@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/gem: Fix a leak in drm_gem_objects_lookup()

[ Upstream commit ec0bb482de0ad5e4aba2a4537ea53eaeb77d11a6 ]

If the "handles" allocation or the copy_from_user() fails then we leak
"objs".  It's supposed to be freed in panfrost_job_cleanup().

Fixes: c117aa4d8701 ("drm: Add a drm_gem_objects_lookup helper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200320132334.GC95012@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: ratelimit crtc event overflow error

[ Upstream commit 5e16372b5940b1fecc3cc887fc02a50ba148d373 ]

This can happen a lot when things go pear shaped.  Lets not flood dmesg
when this happens.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: caam - silence .setkey in case of bad key length

[ Upstream commit da6a66853a381864f4b040832cf11f0dbba0a097 ]

In case of bad key length, driver emits "key size mismatch" messages,
but only for xts(aes) algorithms.

Reduce verbosity by making them visible only when debugging.
This way crypto fuzz testing log cleans up a bit.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: fix stalled deferred requests

[ Upstream commit dd9dfcdf5a603680458f5e7b0d2273c66e5417db ]

Always do io_commit_cqring() after completing a request, even if it was
accounted as overflowed on the CQ side. Failing to do that may lead to
not to pushing deferred requests when needed, and so stalling the whole
ring.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: fix racy overflow count reporting

[ Upstream commit b2bd1cf99f3e7c8fbf12ea07af2c6998e1209e25 ]

All ->cq_overflow modifications should be under completion_lock,
otherwise it can report a wrong number to the userspace. Fix it in
io_uring_cancel_files().

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Do not increment operation_region reference counts for field units

[ Upstream commit 6a54ebae6d047c988a31f5ac5a64ab5cf83797a2 ]

ACPICA commit e17b28cfcc31918d0db9547b6b274b09c413eb70

Object reference counts are used as a part of ACPICA's garbage
collection mechanism. This mechanism keeps track of references to
heap-allocated structures such as the ACPI operand objects.

Recent server firmware has revealed that this reference count can
overflow on large servers that declare many field units under the
same operation_region. This occurs because each field unit declaration
will add a reference count to the source operation_region.

This change solves the reference count overflow for operation_regions
objects by preventing fieldunits from incrementing their
operation_region's reference count. Each operation_region's reference
count will not be changed by named objects declared under the Field
operator. During namespace deletion, the operation_region namespace
node will be deleted and each fieldunit will be deleted without
touching the deleted operation_region object.

Link: https://github.com/acpica/acpica/commit/e17b28cf
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: qgroup: free per-trans reserved space when a subvolume gets dropped

[ Upstream commit a3cf0e4342b6af9e6b34a4b913c630fbd03a82ea ]

[BUG]
Sometime fsstress could lead to qgroup warning for case like
generic/013:

  BTRFS warning (device dm-3): qgroup 0/259 has unreleased space, type 1 rsv 81920
  ------------[ cut here ]------------
  WARNING: CPU: 9 PID: 24535 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs]
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:close_ctree+0x1dc/0x323 [btrfs]
  Call Trace:
   btrfs_put_super+0x15/0x17 [btrfs]
   generic_shutdown_super+0x72/0x110
   kill_anon_super+0x18/0x30
   btrfs_kill_super+0x17/0x30 [btrfs]
   deactivate_locked_super+0x3b/0xa0
   deactivate_super+0x40/0x50
   cleanup_mnt+0x135/0x190
   __cleanup_mnt+0x12/0x20
   task_work_run+0x64/0xb0
   __prepare_exit_to_usermode+0x1bc/0x1c0
   __syscall_return_slowpath+0x47/0x230
   do_syscall_64+0x64/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ---[ end trace 6c341cdf9b6cc3c1 ]---
  BTRFS error (device dm-3): qgroup reserved space leaked

While that subvolume 259 is no longer in that filesystem.

[CAUSE]
Normally per-trans qgroup reserved space is freed when a transaction is
committed, in commit_fs_roots().

However for completely dropped subvolume, that subvolume is completely
gone, thus is no longer in the fs_roots_radix, and its per-trans
reserved qgroup will never be freed.

Since the subvolume is already gone, leaked per-trans space won't cause
any trouble for end users.

[FIX]
Just call btrfs_qgroup_free_meta_all_pertrans() before a subvolume is
completely dropped.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: allow btrfs_truncate_block() to fallback to nocow for data space reservation

[ Upstream commit 6d4572a9d71d5fc2affee0258d8582d39859188c ]

[BUG]
When the data space is exhausted, even if the inode has NOCOW attribute,
we will still refuse to truncate unaligned range due to ENOSPC.

The following script can reproduce it pretty easily:
  #!/bin/bash

  dev=/dev/test/test
  mnt=/mnt/btrfs

  umount $dev &> /dev/null
  umount $mnt &> /dev/null

  mkfs.btrfs -f $dev -b 1G
  mount -o nospace_cache $dev $mnt
  touch $mnt/foobar
  chattr +C $mnt/foobar

  xfs_io -f -c "pwrite -b 4k 0 4k" $mnt/foobar > /dev/null
  xfs_io -f -c "pwrite -b 4k 0 1G" $mnt/padding &> /dev/null
  sync

  xfs_io -c "fpunch 0 2k" $mnt/foobar
  umount $mnt

Currently this will fail at the fpunch part.

[CAUSE]
Because btrfs_truncate_block() always reserves space without checking
the NOCOW attribute.

Since the writeback path follows NOCOW bit, we only need to bother the
space reservation code in btrfs_truncate_block().

[FIX]
Make btrfs_truncate_block() follow btrfs_buffered_write() to try to
reserve data space first, and fall back to NOCOW check only when we
don't have enough space.

Such always-try-reserve is an optimization introduced in
btrfs_buffered_write(), to avoid expensive btrfs_check_can_nocow() call.

This patch will export check_can_nocow() as btrfs_check_can_nocow(), and
use it in btrfs_truncate_block() to fix the problem.

Reported-by: Martin Doucha <martin.doucha@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: fix super block seq numbers comparision in register_cache_set()

[ Upstream commit 117f636ea695270fe492d0c0c9dfadc7a662af47 ]

In register_cache_set(), c is pointer to struct cache_set, and ca is
pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this
registering cache has up to date version and other members, the in-
memory version and other members should be updated to the newer value.

But current implementation makes a cache set only has a single cache
device, so the above assumption works well except for a special case.
The execption is when a cache device new created and both ca->sb.seq and
c->sb.seq are 0, because the super block is never flushed out yet. In
the location for the following if() check,
2156         if (ca->sb.seq > c->sb.seq) {
2157                 c->sb.version           = ca->sb.version;
2158                 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
2159                 c->sb.flags             = ca->sb.flags;
2160                 c->sb.seq               = ca->sb.seq;
2161                 pr_debug("set version = %llu\n", c->sb.version);
2162         }
c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0,
the if() check will fail (because both values are 0), and the cache set
version, set_uuid, flags and seq won't be updated.

The above problem is hiden for current code, because the bucket size is
compatible among different super block version. And the next time when
running cache set again, ca->sb.seq will be larger than 0 and cache set
super block version will be updated properly.

But if the large bucket feature is enabled,  sb->bucket_size is the low
16bits of the bucket size. For a power of 2 value, when the actual
bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then
read_super_common() will fail because the if() check to
is_power_of_2(sb->bucket_size) is false. This is how the long time
hidden bug is triggered.

This patch modifies the if() check to the following way,
2156         if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
Then cache set's version, set_uuid, flags and seq will always be updated
corectly including for a new created cache device.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dyndbg: fix a BUG_ON in ddebug_describe_flags

[ Upstream commit f678ce8cc3cb2ad29df75d8824c74f36398ba871 ]

ddebug_describe_flags() currently fills a caller provided string buffer,
after testing its size (also passed) in a BUG_ON.  Fix this by
replacing them with a known-big-enough string buffer wrapped in a
struct, and passing that instead.

Also simplify ddebug_describe_flags() flags parameter from a struct to
a member in that struct, and hoist the member deref up to the caller.
This makes the function reusable (soon) where flags are unpacked.

Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: bdc: Halt controller on suspend

[ Upstream commit 5fc453d7de3d0c345812453823a3a56783c5f82c ]

GISB bus error kernel panics have been observed during S2 transition
tests on the 7271t platform. The errors are a result of the BDC
interrupt handler trying to access BDC register space after the
system's suspend callbacks have completed.

Adding a suspend hook to the BDC driver that halts the controller before
S2 entry thus preventing unwanted access to the BDC register space during
this transition.

Signed-off-by: Danesh Petigara <danesh.petigara@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bdc: Fix bug causing crash after multiple disconnects

[ Upstream commit a95bdfd22076497288868c028619bc5995f5cc7f ]

Multiple connects/disconnects can cause a crash on the second
disconnect. The driver had a problem where it would try to send
endpoint commands after it was disconnected which is not allowed
by the hardware. The fix is to only allow the endpoint commands
when the endpoint is connected. This will also fix issues that
showed up when using configfs to create gadgets.

Signed-off-by: Sasi Kumar <sasi.kumar@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: net2280: fix memory leak on probe error handling paths

[ Upstream commit 2468c877da428ebfd701142c4cdfefcfb7d4c00e ]

Driver does not release memory for device on error handling paths in
net2280_probe() when gadget_release() is not registered yet.

The patch fixes the bug like in other similar drivers.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1

[ Upstream commit cdd2b769789ae1a030e1a26f6c37c5833cabcb34 ]

To fix support for the O2 host controller Seabird1, set the quirk
SDHCI_QUIRK2_PRESET_VALUE_BROKEN and the capability bit MMC_CAP2_NO_SDIO.
Moreover, assign the ->get_cd() callback.

Signed-off-by: Shirley Her <shirley.her@bayhubtech.com>
Link: https://lore.kernel.org/r/20200721011733.8416-1-shirley.her@bayhubtech.com
[Ulf: Updated the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/uaccess: Make __get_user_size() Clang compliant on 32-bit

[ Upstream commit 158807de5822d1079e162a3762956fd743dd483e ]

Clang fails to compile __get_user_size() on 32-bit for the following code:

      long long val;

      __get_user(val, usrptr);

with: error: invalid output size for constraint '=q'

GCC compiles the same code without complaints.

The reason is that GCC and Clang are architecturally different, which leads
to subtle issues for code that's invalid but clearly dead, i.e. with code
that emulates polymorphism with the preprocessor and sizeof.

GCC will perform semantic analysis after early inlining and dead code
elimination, so it will not warn on invalid code that's dead. Clang
strictly performs optimizations after semantic analysis, so it will warn
for dead code.

Neither Clang nor GCC like this very much with -m32:

long long ret;
asm ("movb $5, %0" : "=q" (ret));

However, GCC can tolerate this variant:

long long ret;
switch (sizeof(ret)) {
case 1:
        asm ("movb $5, %0" : "=q" (ret));
        break;
case 8:;
}

Clang, on the other hand, won't accept that because it validates the inline
asm for the '1' case before the optimisation phase where it realises that
it wouldn't have to emit it anyway.

If LLVM (Clang's "back end") fails such as during instruction selection or
register allocation, it cannot provide accurate diagnostics (warnings /
errors) that contain line information, as the AST has been discarded from
memory at that point.

While there have been early discussions about having C/C++ specific
language optimizations in Clang via the use of MLIR, which would enable
such earlier optimizations, such work is not scoped and likely a multi-year
endeavor.

It was discussed to change the asm output constraint for the one byte case
from "=q" to "=r". While it works for 64-bit, it fails on 32-bit. With '=r'
the compiler could fail to chose a register accessible as high/low which is
required for the byte operation. If that happens the assembly will fail.

Use a local temporary variable of type 'unsigned char' as output for the
byte copy inline asm and then assign it to the real output variable. This
prevents Clang from failing the semantic analysis in the above case.

The resulting code for the actual one byte copy is not affected as the
temporary variable is optimized out.

[ tglx: Amended changelog ]

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: David Woodhouse <dwmw2@infradead.org>
Reported-by: Dmitry Golovin <dima@golovin.in>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://bugs.llvm.org/show_bug.cgi?id=33587
Link: https://github.com/ClangBuiltLinux/linux/issues/3
Link: https://github.com/ClangBuiltLinux/linux/issues/194
Link: https://github.com/ClangBuiltLinux/linux/issues/781
Link: https://lore.kernel.org/lkml/20180209161833.4605-1-dwmw2@infradead.org/
Link: https://lore.kernel.org/lkml/CAK8P3a1EBaWdbAEzirFDSgHVJMtWjuNt2HGG8z+vpXeNHwETFQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20200720204925.3654302-12-ndesaulniers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: update eid test for overflow

[ Upstream commit 3fbc9bb6ca32d12d4d32a7ae32abef67ac95f889 ]

Fix up our comparison to better handle a potential (but largely
unlikely) wrap around.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/powerplay: suppress compile error around BUG_ON

[ Upstream commit 75bc07e2403caea9ecac69f766dfb7dc33547594 ]

To suppress the compile error below for "ARCH=arc".
   drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c: In function 'arcturus_fill_eeprom_i2c_req':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
      22 |  pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
         |  ^~~~~~~
   include/asm-generic/bug.h:62:57: note: in expansion of macro 'BUG'
      62 | #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
         |                                                         ^~~
   drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c:2157:2: note: in expansion of macro 'BUG_ON'
    2157 |  BUG_ON(numbytes > MAX_SW_I2C_COMMANDS);

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: host1x: debug: Fix multiple channels emitting messages simultaneously

[ Upstream commit 35681862808472a0a4b9a8817ae2789c0b5b3edc ]

Once channel's job is hung, it dumps the channel's state into KMSG before
tearing down the offending job. If multiple channels hang at once, then
they dump messages simultaneously, making the debug info unreadable, and
thus, useless. This patch adds mutex which allows only one channel to emit
debug messages at a time.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlegacy: Check the return value of pcie_capability_read_*()

[ Upstream commit 9018fd7f2a73e9b290f48a56b421558fa31e8b75 ]

On failure pcie_capability_read_dword() sets it's last parameter, val
to 0. However, with Patch 14/14, it is possible that val is set to ~0 on
failure. This would introduce a bug because (x & x) == (~0 & x).

This bug can be avoided without changing the function's behaviour if the
return value of pcie_capability_read_dword is checked to confirm success.

Check the return value of pcie_capability_read_dword() to ensure success.

Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200713175529.29715-3-refactormyself@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: asus-nb-wmi: add support for ASUS ROG Zephyrus G14 and G15

[ Upstream commit 13bceda68fb9ef388ad40d355ab8d03ee64d14c2 ]

Add device support for the new ASUS ROG Zephyrus G14 (GA401I) and
G15 (GA502I) series.

This is accomplished by two new quirk entries (one per each series),
as well as all current available G401I/G502I DMI_PRODUCT_NAMEs to match
the corresponding devices.

Signed-off-by: Armas Spann <zappel@retarded.farm>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: set state of hanger slot to FREE when flushing PSQ

[ Upstream commit fcdd7a875def793c38d7369633af3eba6c7cf089 ]

When USB or SDIO device got abnormal bus disconnection, host driver
tried to clean up the skbs in PSQ and TXQ (The skb's pointer in hanger
slot linked to PSQ and TSQ), so we should set the state of skb hanger slot
to BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb.
In brcmf_fws_bus_txq_cleanup it already sets
BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb, therefore we add the
same thing in brcmf_fws_psq_flush to avoid following warning message.

   [ 1580.012880] ------------   [ cut here ]------------
   [ 1580.017550] WARNING: CPU: 3 PID: 3065 at
drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49
brcmu_pkt_buf_free_skb+0x21/0x30 [brcmutil]
   [ 1580.184017] Call Trace:
   [ 1580.186514]  brcmf_fws_cleanup+0x14e/0x190 [brcmfmac]
   [ 1580.191594]  brcmf_fws_del_interface+0x70/0x90 [brcmfmac]
   [ 1580.197029]  brcmf_proto_bcdc_del_if+0xe/0x10 [brcmfmac]
   [ 1580.202418]  brcmf_remove_interface+0x69/0x190 [brcmfmac]
   [ 1580.207888]  brcmf_detach+0x90/0xe0 [brcmfmac]
   [ 1580.212385]  brcmf_usb_disconnect+0x76/0xb0 [brcmfmac]
   [ 1580.217557]  usb_unbind_interface+0x72/0x260
   [ 1580.221857]  device_release_driver_internal+0x141/0x200
   [ 1580.227152]  device_release_driver+0x12/0x20
   [ 1580.231460]  bus_remove_device+0xfd/0x170
   [ 1580.235504]  device_del+0x1d9/0x300
   [ 1580.239041]  usb_disable_device+0x9e/0x270
   [ 1580.243160]  usb_disconnect+0x94/0x270
   [ 1580.246980]  hub_event+0x76d/0x13b0
   [ 1580.250499]  process_one_work+0x144/0x360
   [ 1580.254564]  worker_thread+0x4d/0x3c0
   [ 1580.258247]  kthread+0x109/0x140
   [ 1580.261515]  ? rescuer_thread+0x340/0x340
   [ 1580.265543]  ? kthread_park+0x60/0x60
   [ 1580.269237]  ? SyS_exit_group+0x14/0x20
   [ 1580.273118]  ret_from_fork+0x25/0x30
   [ 1580.300446] ------------   [ cut here ]------------

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200624091608.25154-2-wright.feng@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: To fix Bss Info flag definition Bug

[ Upstream commit fa3266541b13f390eb35bdbc38ff4a03368be004 ]

Bss info flag definition need to be fixed from 0x2 to 0x4
This flag is for rssi info received on channel.
All Firmware branches defined as 0x4 and this is bug in brcmfmac.

Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200604071835.3842-6-wright.feng@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: keep SDIO watchdog running when console_interval is non-zero

[ Upstream commit eccbf46b15bb3e35d004148f7c3a8fa8e9b26c1e ]

brcmfmac host driver makes SDIO bus sleep and stops SDIO watchdog if no
pending event or data. As a result, host driver does not poll firmware
console buffer before buffer overflow, which leads to missing firmware
logs. We should not stop SDIO watchdog if console_interval is non-zero
in debug build.

Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200604071835.3842-4-wright.feng@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_qca: Bug fixes for SSR

[ Upstream commit 3344537f614b966f726c1ec044d1c70a8cabe178 ]

1.During SSR for command time out if BT SoC goes to inresponsive
state, power cycling of BT SoC was not happening. Given the fix by
sending hw error event to reset the BT SoC.

2.If SSR is triggered then ignore the transmit data requests to
BT SoC until SSR is completed.

Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix fds_example SIGSEGV error

[ Upstream commit eef8a42d6ce087d1c81c960ae0d14f955b742feb ]

The `BPF_LOG_BUF_SIZE`'s value is `UINT32_MAX >> 8`, so define an array
with it on stack caused an overflow.

Signed-off-by: Wenbo Zhang <ethercflow@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200710092035.28919-1-ethercflow@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/powerplay: fix compile error with ARCH=arc

[ Upstream commit 9822ba2ead1baa3de4860ad9472f652c4cc78c9c ]

Fix the compile error below:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c: In function 'smu_v11_0_init_microcode':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
      22 |  pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
         |  ^~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:176:3: note: in expansion of macro 'BUG'
     176 |   BUG();

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/display: properly guard the calls to swSMU functions

[ Upstream commit 4072327a2622af8688b88f5cd0a472136d3bf33d ]

It's only applicable on newer asics.  We could end up here when
using DC on older asics like SI or KV.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/display bail early in dm_pp_get_static_clocks

[ Upstream commit 376814f5fcf1aadda501d1413d56e8af85d19a97 ]

If there are no supported callbacks.  We'll fall back to the
nominal clocks.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Improve DisplayPort monitor interop

[ Upstream commit eec3303de3378cdfaa0bb86f43546dbbd88f94e2 ]

[Why]
DC is very fast at link training and stream enablement
which causes issues such as blackscreens for non-compliant
monitors.

[How]
After debugging with scaler vendors we implement the
minimum delays at the necessary locations to ensure
the monitor does not hang.  Delays are generic due to
lack of IEEE OUI information on the failing displays.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/mmap.c: Add cond_resched() for exit_mmap() CPU stalls

[ Upstream commit 0a3b3c253a1eb2c7fe7f34086d46660c909abeb3 ]

A large process running on a heavily loaded system can encounter the
following RCU CPU stall warning:

  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu:  3-....: (20998 ticks this GP) idle=4ea/1/0x4000000000000002 softirq=556558/556558 fqs=5190
   (t=21013 jiffies g=1005461 q=132576)
  NMI backtrace for cpu 3
  CPU: 3 PID: 501900 Comm: aio-free-ring-w Kdump: loaded Not tainted 5.2.9-108_fbk12_rc3_3858_gb83b75af7909 #1
  Hardware name: Wiwynn   HoneyBadger/PantherPlus, BIOS HBM6.71 02/03/2016
  Call Trace:
   <IRQ>
   dump_stack+0x46/0x60
   nmi_cpu_backtrace.cold.3+0x13/0x50
   ? lapic_can_unplug_cpu.cold.27+0x34/0x34
   nmi_trigger_cpumask_backtrace+0xba/0xca
   rcu_dump_cpu_stacks+0x99/0xc7
   rcu_sched_clock_irq.cold.87+0x1aa/0x397
   ? tick_sched_do_timer+0x60/0x60
   update_process_times+0x28/0x60
   tick_sched_timer+0x37/0x70
   __hrtimer_run_queues+0xfe/0x270
   hrtimer_interrupt+0xf4/0x210
   smp_apic_timer_interrupt+0x5e/0x120
   apic_timer_interrupt+0xf/0x20
   </IRQ>
  RIP: 0010:kmem_cache_free+0x223/0x300
  Code: 88 00 00 00 0f 85 ca 00 00 00 41 8b 55 18 31 f6 f7 da 41 f6 45 0a 02 40 0f 94 c6 83 c6 05 9c 41 5e fa e8 a0 a7 01 00 41 56 9d <49> 8b 47 08 a8 03 0f 85 87 00 00 00 65 48 ff 08 e9 3d fe ff ff 65
  RSP: 0018:ffffc9000e8e3da8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
  RAX: 0000000000020000 RBX: ffff88861b9de960 RCX: 0000000000000030
  RDX: fffffffffffe41e8 RSI: 000060777fe3a100 RDI: 000000000001be18
  RBP: ffffea00186e7780 R08: ffffffffffffffff R09: ffffffffffffffff
  R10: ffff88861b9dea28 R11: ffff88887ffde000 R12: ffffffff81230a1f
  R13: ffff888854684dc0 R14: 0000000000000206 R15: ffff8888547dbc00
   ? remove_vma+0x4f/0x60
   remove_vma+0x4f/0x60
   exit_mmap+0xd6/0x160
   mmput+0x4a/0x110
   do_exit+0x278/0xae0
   ? syscall_trace_enter+0x1d3/0x2b0
   ? handle_mm_fault+0xaa/0x1c0
   do_group_exit+0x3a/0xa0
   __x64_sys_exit_group+0x14/0x20
   do_syscall_64+0x42/0x100
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run
for a very long time given a large process.  This commit therefore adds
a cond_resched() to this loop, providing RCU any needed quiescent states.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/irq-mtk-sysirq: Replace spinlock with raw_spinlock

[ Upstream commit 6eeb997ab5075e770a002c51351fa4ec2c6b5c39 ]

This driver may take a regular spinlock when a raw spinlock
(irq_desc->lock) is already taken which results in the following
lockdep splat:

=============================
[ BUG: Invalid wait context ]
5.7.0-rc7 #1 Not tainted
-----------------------------
swapper/0/0 is trying to lock:
ffffff800303b798 (&chip_data->lock){....}-{3:3}, at: mtk_sysirq_set_type+0x48/0xc0
other info that might help us debug this:
context-{5:5}
2 locks held by swapper/0/0:
 #0: ffffff800302ee68 (&desc->request_mutex){....}-{4:4}, at: __setup_irq+0xc4/0x8a0
 #1: ffffff800302ecf0 (&irq_desc_lock_class){....}-{2:2}, at: __setup_irq+0xe4/0x8a0
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc7 #1
Hardware name: Pumpkin MT8516 (DT)
Call trace:
 dump_backtrace+0x0/0x180
 show_stack+0x14/0x20
 dump_stack+0xd0/0x118
 __lock_acquire+0x8c8/0x2270
 lock_acquire+0xf8/0x470
 _raw_spin_lock_irqsave+0x50/0x78
 mtk_sysirq_set_type+0x48/0xc0
 __irq_set_trigger+0x58/0x170
 __setup_irq+0x420/0x8a0
 request_threaded_irq+0xd8/0x190
 timer_of_init+0x1e8/0x2c4
 mtk_gpt_init+0x5c/0x1dc
 timer_probe+0x74/0xf4
 time_init+0x14/0x44
 start_kernel+0x394/0x4f0

Replace the spinlock_t with raw_spinlock_t to avoid this warning.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200615074445.3579-1-brgl@bgdev.pl
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: mscc: restore the base page in vsc8514/8584_config_init

[ Upstream commit 6119dda34e5d0821959e37641b287576826b6378 ]

In the vsc8584_config_init and vsc8514_config_init, the base page is set
to 'GPIO', configuration is done, and the page is never explicitly
restored to the standard page. No bug was triggered as it turns out
helpers called in those config_init functions do modify the base page,
and set it back to standard. But that is dangerous and any modification
to those functions would introduce bugs. This patch fixes this, to
improve maintenance, by restoring the base page to 'standard' once
'GPIO' accesses are completed.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: disable AGP by default

[ Upstream commit ba806f98f868ce107aa9c453fef751de9980e4af ]

Always use the PCI GART instead. We just have to many cases
where AGP still causes problems. This means a performance
regression for some GPUs, but also a bug fix for some others.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/debugfs: fix plain echo to connector "force" attribute

[ Upstream commit c704b17071c4dc571dca3af4e4151dac51de081a ]

Using plain echo to set the "force" connector attribute fails with
-EINVAL, because echo appends a newline to the output.

Replace strcmp with sysfs_streq to also accept strings that end with a
newline.

v2: use sysfs_streq instead of stripping trailing whitespace

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817104307.17124-1-m.tretter@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix a null pointer access in msm_gem_shrinker_count()

[ Upstream commit 3cbdc8d8b7f39a7af3ea7b8dfa75caaebfda4e56 ]

Adding an msm_gem_object object to the inactive_list before completing
its initialization is a bad idea because shrinker may pick it up from the
inactive_list. Fix this by making sure that the initialization is complete
before moving the msm_obj object to the inactive list.

This patch fixes the below error:
[10027.553044] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000068
[10027.573305] Mem abort info:
[10027.590160]   ESR = 0x96000006
[10027.597905]   EC = 0x25: DABT (current EL), IL = 32 bits
[10027.614430]   SET = 0, FnV = 0
[10027.624427]   EA = 0, S1PTW = 0
[10027.632722] Data abort info:
[10027.638039]   ISV = 0, ISS = 0x00000006
[10027.647459]   CM = 0, WnR = 0
[10027.654345] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001e3a6a000
[10027.672681] [0000000000000068] pgd=0000000198c31003, pud=0000000198c31003, pmd=0000000000000000
[10027.693900] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[10027.738261] CPU: 3 PID: 214 Comm: kswapd0 Tainted: G S                5.4.40 #1
[10027.745766] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT)
[10027.752472] pstate: 80c00009 (Nzcv daif +PAN +UAO)
[10027.757409] pc : mutex_is_locked+0x14/0x2c
[10027.761626] lr : msm_gem_shrinker_count+0x70/0xec
[10027.766454] sp : ffffffc011323ad0
[10027.769867] x29: ffffffc011323ad0 x28: ffffffe677e4b878
[10027.775324] x27: 0000000000000cc0 x26: 0000000000000000
[10027.780783] x25: ffffff817114a708 x24: 0000000000000008
[10027.786242] x23: ffffff8023ab7170 x22: 0000000000000001
[10027.791701] x21: ffffff817114a080 x20: 0000000000000119
[10027.797160] x19: 0000000000000068 x18: 00000000000003bc
[10027.802621] x17: 0000000004a34210 x16: 00000000000000c0
[10027.808083] x15: 0000000000000000 x14: 0000000000000000
[10027.813542] x13: ffffffe677e0a3c0 x12: 0000000000000000
[10027.819000] x11: 0000000000000000 x10: ffffff8174b94340
[10027.824461] x9 : 0000000000000000 x8 : 0000000000000000
[10027.829919] x7 : 00000000000001fc x6 : ffffffc011323c88
[10027.835373] x5 : 0000000000000001 x4 : ffffffc011323d80
[10027.840832] x3 : ffffffff0477b348 x2 : 0000000000000000
[10027.846290] x1 : ffffffc011323b68 x0 : 0000000000000068
[10027.851748] Call trace:
[10027.854264]  mutex_is_locked+0x14/0x2c
[10027.858121]  msm_gem_shrinker_count+0x70/0xec
[10027.862603]  shrink_slab+0xc0/0x4b4
[10027.866187]  shrink_node+0x4a8/0x818
[10027.869860]  kswapd+0x624/0x890
[10027.873097]  kthread+0x11c/0x12c
[10027.876424]  ret_from_fork+0x10/0x18
[10027.880102] Code: f9000bf3 910003fd aa0003f3 d503201f (f9400268)
[10027.886362] ---[ end trace df5849a1a3543251 ]---
[10027.891518] Kernel panic - not syncing: Fatal exception

Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: msm: a6xx: fix gpu failure after system resume

[ Upstream commit 57c0bd517c06b088106b0236ed604056c8e06da5 ]

On targets where GMU is available, GMU takes over the ownership of GX GDSC
during its initialization. So, move the refcount-get on GX PD before we
initialize the GMU. This ensures that nobody can collapse the GX GDSC
once GMU owns the GX GDSC. This patch fixes some GMU OOB errors seen
during GPU wake up during a system resume.

Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: mtu3: clear dual mode of u3port when disable device

[ Upstream commit f1e51e99ed498d4aa9ae5df28e43d558ea627781 ]

If not clear u3port's dual mode when disable device, the IP
will fail to enter sleep mode when suspend.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1595834101-13094-10-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix lockdep splat from btrfs_dump_space_info

[ Upstream commit ab0db043c35da3477e57d4d516492b2d51a5ca0f ]

When running with -o enospc_debug you can get the following splat if one
of the dump_space_info's trip

  ======================================================
  WARNING: possible circular locking dependency detected
  5.8.0-rc5+ #20 Tainted: G           OE
  ------------------------------------------------------
  dd/563090 is trying to acquire lock:
  ffff9e7dbf4f1e18 (&ctl->tree_lock){+.+.}-{2:2}, at: btrfs_dump_free_space+0x2b/0xa0 [btrfs]

  but task is already holding lock:
  ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #3 (&cache->lock){+.+.}-{2:2}:
 _raw_spin_lock+0x25/0x30
 btrfs_add_reserved_bytes+0x3c/0x3c0 [btrfs]
 find_free_extent+0x7ef/0x13b0 [btrfs]
 btrfs_reserve_extent+0x9b/0x180 [btrfs]
 btrfs_alloc_tree_block+0xc1/0x340 [btrfs]
 alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs]
 __btrfs_cow_block+0x122/0x530 [btrfs]
 btrfs_cow_block+0x106/0x210 [btrfs]
 commit_cowonly_roots+0x55/0x300 [btrfs]
 btrfs_commit_transaction+0x4ed/0xac0 [btrfs]
 sync_filesystem+0x74/0x90
 generic_shutdown_super+0x22/0x100
 kill_anon_super+0x14/0x30
 btrfs_kill_super+0x12/0x20 [btrfs]
 deactivate_locked_super+0x36/0x70
 cleanup_mnt+0x104/0x160
 task_work_run+0x5f/0x90
 __prepare_exit_to_usermode+0x1bd/0x1c0
 do_syscall_64+0x5e/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #2 (&space_info->lock){+.+.}-{2:2}:
 _raw_spin_lock+0x25/0x30
 btrfs_block_rsv_release+0x1a6/0x3f0 [btrfs]
 btrfs_inode_rsv_release+0x4f/0x170 [btrfs]
 btrfs_clear_delalloc_extent+0x155/0x480 [btrfs]
 clear_state_bit+0x81/0x1a0 [btrfs]
 __clear_extent_bit+0x25c/0x5d0 [btrfs]
 clear_extent_bit+0x15/0x20 [btrfs]
 btrfs_invalidatepage+0x2b7/0x3c0 [btrfs]
 truncate_cleanup_page+0x47/0xe0
 truncate_inode_pages_range+0x238/0x840
 truncate_pagecache+0x44/0x60
 btrfs_setattr+0x202/0x5e0 [btrfs]
 notify_change+0x33b/0x490
 do_truncate+0x76/0xd0
 path_openat+0x687/0xa10
 do_filp_open+0x91/0x100
 do_sys_openat2+0x215/0x2d0
 do_sys_open+0x44/0x80
 do_syscall_64+0x52/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #1 (&tree->lock#2){+.+.}-{2:2}:
 _raw_spin_lock+0x25/0x30
 find_first_extent_bit+0x32/0x150 [btrfs]
 write_pinned_extent_entries.isra.0+0xc5/0x100 [btrfs]
 __btrfs_write_out_cache+0x172/0x480 [btrfs]
 btrfs_write_out_cache+0x7a/0xf0 [btrfs]
 btrfs_write_dirty_block_groups+0x286/0x3b0 [btrfs]
 commit_cowonly_roots+0x245/0x300 [btrfs]
 btrfs_commit_transaction+0x4ed/0xac0 [btrfs]
 close_ctree+0xf9/0x2f5 [btrfs]
 generic_shutdown_super+0x6c/0x100
 kill_anon_super+0x14/0x30
 btrfs_kill_super+0x12/0x20 [btrfs]
 deactivate_locked_super+0x36/0x70
 cleanup_mnt+0x104/0x160
 task_work_run+0x5f/0x90
 __prepare_exit_to_usermode+0x1bd/0x1c0
 do_syscall_64+0x5e/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&ctl->tree_lock){+.+.}-{2:2}:
 __lock_acquire+0x1240/0x2460
 lock_acquire+0xab/0x360
 _raw_spin_lock+0x25/0x30
 btrfs_dump_free_space+0x2b/0xa0 [btrfs]
 btrfs_dump_space_info+0xf4/0x120 [btrfs]
 btrfs_reserve_extent+0x176/0x180 [btrfs]
 __btrfs_prealloc_file_range+0x145/0x550 [btrfs]
 cache_save_setup+0x28d/0x3b0 [btrfs]
 btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs]
 btrfs_commit_transaction+0xcc/0xac0 [btrfs]
 btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs]
 btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
 btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs]
 btrfs_file_write_iter+0x3cf/0x610 [btrfs]
 new_sync_write+0x11e/0x1b0
 vfs_write+0x1c9/0x200
 ksys_write+0x68/0xe0
 do_syscall_64+0x52/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  other info that might help us debug this:

  Chain exists of:
    &ctl->tree_lock --> &space_info->lock --> &cache->lock

   Possible unsafe locking scenario:

 CPU0                    CPU1
 ----                    ----
    lock(&cache->lock);
 lock(&space_info->lock);
 lock(&cache->lock);
    lock(&ctl->tree_lock);

   *** DEADLOCK ***

  6 locks held by dd/563090:
   #0: ffff9e7e21d18448 (sb_writers#14){.+.+}-{0:0}, at: vfs_write+0x195/0x200
   #1: ffff9e7dd0410ed8 (&sb->s_type->i_mutex_key#19){++++}-{3:3}, at: btrfs_file_write_iter+0x86/0x610 [btrfs]
   #2: ffff9e7e21d18638 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40b/0x5b0 [btrfs]
   #3: ffff9e7e1f05d688 (&cur_trans->cache_write_mutex){+.+.}-{3:3}, at: btrfs_start_dirty_block_groups+0x158/0x4f0 [btrfs]
   #4: ffff9e7e2284ddb8 (&space_info->groups_sem){++++}-{3:3}, at: btrfs_dump_space_info+0x69/0x120 [btrfs]
   #5: ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs]

  stack backtrace:
  CPU: 3 PID: 563090 Comm: dd Tainted: G           OE     5.8.0-rc5+ #20
  Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
  Call Trace:
   dump_stack+0x96/0xd0
   check_noncircular+0x162/0x180
   __lock_acquire+0x1240/0x2460
   ? wake_up_klogd.part.0+0x30/0x40
   lock_acquire+0xab/0x360
   ? btrfs_dump_free_space+0x2b/0xa0 [btrfs]
   _raw_spin_lock+0x25/0x30
   ? btrfs_dump_free_space+0x2b/0xa0 [btrfs]
   btrfs_dump_free_space+0x2b/0xa0 [btrfs]
   btrfs_dump_space_info+0xf4/0x120 [btrfs]
   btrfs_reserve_extent+0x176/0x180 [btrfs]
   __btrfs_prealloc_file_range+0x145/0x550 [btrfs]
   ? btrfs_qgroup_reserve_data+0x1d/0x60 [btrfs]
   cache_save_setup+0x28d/0x3b0 [btrfs]
   btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs]
   btrfs_commit_transaction+0xcc/0xac0 [btrfs]
   ? start_transaction+0xe0/0x5b0 [btrfs]
   btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs]
   btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
   btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs]
   ? ktime_get_coarse_real_ts64+0xa8/0xd0
   ? trace_hardirqs_on+0x1c/0xe0
   btrfs_file_write_iter+0x3cf/0x610 [btrfs]
   new_sync_write+0x11e/0x1b0
   vfs_write+0x1c9/0x200
   ksys_write+0x68/0xe0
   do_syscall_64+0x52/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This is because we're holding the block_group->lock while trying to dump
the free space cache.  However we don't need this lock, we just need it
to read the values for the printk, so move the free space cache dumping
outside of the block group lock.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-cadence: do not use hardware tuning for SD mode

[ Upstream commit adc40a5179df30421a5537bfeb4545100ab97d5e ]

As commit ef6b75671b5f ("mmc: sdhci-cadence: send tune request twice to
work around errata") stated, this IP has an errata. This commit applies
the second workaround for the SD mode.

Due to the errata, it is not possible to use the hardware tuning provided
by SDHCI_HOST_CONTROL2.

Use the software-controlled tuning like the eMMC mode.

Set sdhci_host_ops::platform_execute_tuning instead of overriding
mmc_host_ops::execute_tuning.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20200720061141.172944-1-yamada.masahiro@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: fix multiple instances of reference count leaks

[ Upstream commit 659fb5f154c3434c90a34586f3b7aa1c39cf6062 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
ref count before returning the error.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: fix reference count leak in nouveau_debugfs_strap_peek

[ Upstream commit 8f29432417b11039ef960ab18987c7d61b2b5396 ]

nouveau_debugfs_strap_peek() calls pm_runtime_get_sync() that
increments the reference count. In case of failure, decrement the
ref count before returning the error.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: samsung: exynos5422-dmc: Do not ignore return code of regmap_read()

[ Upstream commit c4f16e96d8fdd62ef12898fc0965c42093bed237 ]

Check for regmap_read() return code before using the read value in
following write in exynos5_switch_timing_regs().  Pass reading error
code to the callers.

This does not introduce proper error handling for such failed reads (and
obviously regmap_write() error is still ignored) because the driver
ignored this in all places.  Therefor it only fixes reported issue while
matching current driver coding style:

       drivers/memory/samsung/exynos5422-dmc.c: In function 'exynos5_switch_timing_regs':
    >> drivers/memory/samsung/exynos5422-dmc.c:216:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/etnaviv: fix ref count leak via pm_runtime_get_sync

[ Upstream commit c5d5a32ead1e3a61a07a1e59eb52a53e4a6b2a7f ]

in etnaviv_gpu_submit, etnaviv_gpu_recover_hang, etnaviv_gpu_debugfs,
and etnaviv_gpu_init the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding

[ Upstream commit bbe28fc3cbabbef781bcdf847615d52ce2e26e42 ]

hi3660-hikey960.dts:
  Define a 'ports' node for 'adv7533: adv7533@39' and the
  'adi,dsi-lanes' property to make it compliant with the adi,adv7533 DT
  binding.

  This fills the requirements to meet the binding requirements,
  remote endpoints are not defined.

hi6220-hikey.dts:
  Change property name s/pd-gpio/pd-gpios, gpio properties should be
  plural. This is just a cosmetic change.

Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/kms/nv50-: Fix disabling dithering

[ Upstream commit fb2420b701edbf96c2b6d557f0139902f455dc2b ]

While we expose the ability to turn off hardware dithering for nouveau,
we actually make the mistake of turning it on anyway, due to
dithering_depth containing a non-zero value if our dithering depth isn't
also set to 6 bpc.

So, fix it by never enabling dithering when it's disabled.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-6-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

md-cluster: fix wild pointer of unlock_all_bitmaps()

[ Upstream commit 60f80d6f2d07a6d8aee485a1d1252327eeee0c81 ]

reproduction steps:
```
node1 # mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda
/dev/sdb
node2 # mdadm -A /dev/md0 /dev/sda /dev/sdb
node1 # mdadm -G /dev/md0 -b none
mdadm: failed to remove clustered bitmap.
node1 # mdadm -S --scan
^C  <==== mdadm hung & kernel crash
```

kernel stack:
```
[  335.230657] general protection fault: 0000 [#1] SMP NOPTI
[...]
[  335.230848] Call Trace:
[  335.230873]  ? unlock_all_bitmaps+0x5/0x70 [md_cluster]
[  335.230886]  unlock_all_bitmaps+0x3d/0x70 [md_cluster]
[  335.230899]  leave+0x10f/0x190 [md_cluster]
[  335.230932]  ? md_super_wait+0x93/0xa0 [md_mod]
[  335.230947]  ? leave+0x5/0x190 [md_cluster]
[  335.230973]  md_cluster_stop+0x1a/0x30 [md_mod]
[  335.230999]  md_bitmap_free+0x142/0x150 [md_mod]
[  335.231013]  ? _cond_resched+0x15/0x40
[  335.231025]  ? mutex_lock+0xe/0x30
[  335.231056]  __md_stop+0x1c/0xa0 [md_mod]
[  335.231083]  do_md_stop+0x160/0x580 [md_mod]
[  335.231119]  ? 0xffffffffc05fb078
[  335.231148]  md_ioctl+0xa04/0x1930 [md_mod]
[  335.231165]  ? filename_lookup+0xf2/0x190
[  335.231179]  blkdev_ioctl+0x93c/0xa10
[  335.231205]  ? _cond_resched+0x15/0x40
[  335.231214]  ? __check_object_size+0xd4/0x1a0
[  335.231224]  block_ioctl+0x39/0x40
[  335.231243]  do_vfs_ioctl+0xa0/0x680
[  335.231253]  ksys_ioctl+0x70/0x80
[  335.231261]  __x64_sys_ioctl+0x16/0x20
[  335.231271]  do_syscall_64+0x65/0x1f0
[  335.231278]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
```

Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Add missing quirk flags for usb_host_hs

[ Upstream commit 4254632dba27271f6de66efd87e444ee405dee29 ]

Similar to what we have for the legacy platform data, we need to
configure SWSUP_SIDLE and SWSUP_MSTANDBY quirks for usb_host_hs.

These are needed to drop the legacy platform data for usb_host_hs.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: neofb: fix memory leak in neo_scan_monitor()

[ Upstream commit edcb3895a751c762a18d25c8d9846ce9759ed7e1 ]

neofb_probe() calls neo_scan_monitor() that can successfully allocate a
memory for info->monspecs.modedb and proceed to case 0x03. There it does
not free the memory and returns -1. neofb_probe() goes to label
err_scan_monitor, thus, it does not free this memory through calling
fb_destroy_modedb() as well. We can not go to label err_init_hw since
neo_scan_monitor() can fail during memory allocation. So, the patch frees
the memory directly for case 0x03.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630195451.18675-1-novikov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: savage: fix memory leak on error handling path in probe

[ Upstream commit e8d35898a78e34fc854ed9680bc3f9caedab08cd ]

savagefb_probe() calls savage_init_fb_info() that can successfully
allocate memory for info->pixmap.addr but then fail when
fb_alloc_cmap() fails. savagefb_probe() goes to label failed_init and
does not free allocated memory. It is not valid to go to label
failed_mmio since savage_init_fb_info() can fail during memory
allocation as well. So, the patch free allocated memory on the error
handling path in savage_init_fb_info() itself.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619162136.9010-1-novikov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>