Mel Gorman [Mon, 28 Feb 2022 23:01:02 +0000 (10:01 +1100)]
mm/page_alloc: do not prefetch buddies during bulk free
free_pcppages_bulk() has taken two passes through the pcp lists since
commit
0a5f4e5b4562 ("mm/free_pcppages_bulk: do not hold lock when picking
pages to free") due to deferring the cost of selecting PCP lists until the
zone lock is held.
As the list processing now takes place under the zone lock, it's less
clear that this will always benefit for two reasons.
1. There is a guaranteed cost to calculating the buddy which definitely
has to be calculated again. However, as the zone lock is held and
there is no deferring of buddy merging, there is no guarantee that the
prefetch will have completed when the second buddy calculation takes
place and buddies are being merged. With or without the prefetch, there
may be further stalls depending on how many pages get merged. In other
words, a stall due to merging is inevitable and at best only one stall
might be avoided at the cost of calculating the buddy location twice.
2. As the zone lock is held, prefetch_nr makes less sense as once
prefetch_nr expires, the cache lines of interest have already been
merged.
The main concern is that there is a definite cost to calculating the buddy
location early for the prefetch and it is a "maybe win" depending on
whether the CPU prefetch logic and memory is fast enough. Remove the
prefetch logic on the basis that reduced instructions in a path is always
a saving where as the prefetch might save one memory stall depending on
the CPU and memory.
In most cases, this has marginal benefit as the calculations are a small
part of the overall freeing of pages. However, it was detectable on at
least one machine.
5.17.0-rc3 5.17.0-rc3
mm-highpcplimit-v2r1 mm-noprefetch-v1r1
Min elapsed 630.00 ( 0.00%) 610.00 ( 3.17%)
Amean elapsed 639.00 ( 0.00%) 623.00 * 2.50%*
Max elapsed 660.00 ( 0.00%) 660.00 ( 0.00%)
Link: https://lkml.kernel.org/r/20220221094119.15282-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Suggested-by: Aaron Lu <aaron.lu@intel.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Mel Gorman [Mon, 28 Feb 2022 23:01:02 +0000 (10:01 +1100)]
mm/page_alloc: limit number of high-order pages on PCP during bulk free
When a PCP is mostly used for frees then high-order pages can exist on PCP
lists for some time. This is problematic when the allocation pattern is
all allocations from one CPU and all frees from another resulting in
colder pages being used. When bulk freeing pages, limit the number of
high-order pages that are stored on the PCP lists.
Netperf running on localhost exhibits this pattern and while it does not
matter for some machines, it does matter for others with smaller caches
where cache misses cause problems due to reduced page reuse. Pages freed
directly to the buddy list may be reused quickly while still cache hot
where as storing on the PCP lists may be cold by the time
free_pcppages_bulk() is called.
Using perf kmem:mm_page_alloc, the 5 most used page frames were
5.17-rc3
13041 pfn=0x111a30
13081 pfn=0x5814d0
13097 pfn=0x108258
13121 pfn=0x689598
13128 pfn=0x5814d8
5.17-revert-highpcp
192009 pfn=0x54c140
195426 pfn=0x1081d0
200908 pfn=0x61c808
243515 pfn=0xa9dc20
402523 pfn=0x222bb8
5.17-full-series
142693 pfn=0x346208
162227 pfn=0x13bf08
166413 pfn=0x2711e0
166950 pfn=0x2702f8
The spread is wider as there is still time before pages freed to one PCP
get released with a tradeoff between fast reuse and reduced zone lock
acquisition.
On the machine used to gather the traces, the headline performance was
equivalent.
netperf-tcp
5.17.0-rc3 5.17.0-rc3 5.17.0-rc3
vanilla mm-reverthighpcp-v1r1 mm-highpcplimit-v2
Hmean 64 839.93 ( 0.00%) 840.77 ( 0.10%) 841.02 ( 0.13%)
Hmean 128 1614.22 ( 0.00%) 1622.07 * 0.49%* 1636.41 * 1.37%*
Hmean 256 2952.00 ( 0.00%) 2953.19 ( 0.04%) 2977.76 * 0.87%*
Hmean 1024 10291.67 ( 0.00%) 10239.17 ( -0.51%) 10434.41 * 1.39%*
Hmean 2048 17335.08 ( 0.00%) 17399.97 ( 0.37%) 17134.81 * -1.16%*
Hmean 3312 22628.15 ( 0.00%) 22471.97 ( -0.69%) 22422.78 ( -0.91%)
Hmean 4096 25009.50 ( 0.00%) 24752.83 * -1.03%* 24740.41 ( -1.08%)
Hmean 8192 32745.01 ( 0.00%) 31682.63 * -3.24%* 32153.50 * -1.81%*
Hmean 16384 39759.59 ( 0.00%) 36805.78 * -7.43%* 38948.13 * -2.04%*
On a 1-socket skylake machine with a small CPU cache that suffers more if
cache misses are too high
netperf-tcp
5.17.0-rc3 5.17.0-rc3 5.17.0-rc3
vanilla mm-reverthighpcp-v1 mm-highpcplimit-v2
Hmean 64 938.95 ( 0.00%) 941.50 * 0.27%* 943.61 * 0.50%*
Hmean 128 1843.10 ( 0.00%) 1857.58 * 0.79%* 1861.09 * 0.98%*
Hmean 256 3573.07 ( 0.00%) 3667.45 * 2.64%* 3674.91 * 2.85%*
Hmean 1024 13206.52 ( 0.00%) 13487.80 * 2.13%* 13393.21 * 1.41%*
Hmean 2048 22870.23 ( 0.00%) 23337.96 * 2.05%* 23188.41 * 1.39%*
Hmean 3312 31001.99 ( 0.00%) 32206.50 * 3.89%* 31863.62 * 2.78%*
Hmean 4096 35364.59 ( 0.00%) 36490.96 * 3.19%* 36112.54 * 2.11%*
Hmean 8192 48497.71 ( 0.00%) 49954.05 * 3.00%* 49588.26 * 2.25%*
Hmean 16384 58410.86 ( 0.00%) 60839.80 * 4.16%* 62282.96 * 6.63%*
Note that this was a machine that did not benefit from caching high-order
pages and performance is almost restored with the series applied. It's
not fully restored as cache misses are still higher. This is a trade-off
between optimising for a workload that does all allocs on one CPU and
frees on another or more general workloads that need high-order pages for
SLUB and benefit from avoiding zone->lock for every SLUB refill/drain.
Link: https://lkml.kernel.org/r/20220217002227.5739-7-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Mel Gorman [Mon, 28 Feb 2022 23:01:01 +0000 (10:01 +1100)]
mm/page_alloc: free pages in a single pass during bulk free
free_pcppages_bulk() has taken two passes through the pcp lists since
commit
0a5f4e5b4562 ("mm/free_pcppages_bulk: do not hold lock when picking
pages to free") due to deferring the cost of selecting PCP lists until the
zone lock is held. Now that list selection is simplier, the main cost
during selection is bulkfree_pcp_prepare() which in the normal case is a
simple check and prefetching. As the list manipulations have cost in
itself, go back to freeing pages in a single pass.
The series up to this point was evaulated using a trunc microbenchmark
that is truncating sparse files stored in page cache (mmtests config
config-io-trunc). Sparse files were used to limit filesystem interaction.
The results versus a revert of storing high-order pages in the PCP lists
is
1-socket Skylake
5.17.0-rc3 5.17.0-rc3 5.17.0-rc3
vanilla mm-reverthighpcp-v1 mm-highpcpopt-v2
Min elapsed 540.00 ( 0.00%) 530.00 ( 1.85%) 530.00 ( 1.85%)
Amean elapsed 543.00 ( 0.00%) 530.00 * 2.39%* 530.00 * 2.39%*
Stddev elapsed 4.83 ( 0.00%) 0.00 ( 100.00%) 0.00 ( 100.00%)
CoeffVar elapsed 0.89 ( 0.00%) 0.00 ( 100.00%) 0.00 ( 100.00%)
Max elapsed 550.00 ( 0.00%) 530.00 ( 3.64%) 530.00 ( 3.64%)
BAmean-50 elapsed 540.00 ( 0.00%) 530.00 ( 1.85%) 530.00 ( 1.85%)
BAmean-95 elapsed 542.22 ( 0.00%) 530.00 ( 2.25%) 530.00 ( 2.25%)
BAmean-99 elapsed 542.22 ( 0.00%) 530.00 ( 2.25%) 530.00 ( 2.25%)
2-socket CascadeLake
5.17.0-rc3 5.17.0-rc3 5.17.0-rc3
vanilla mm-reverthighpcp-v1 mm-highpcpopt-v2
Min elapsed 510.00 ( 0.00%) 500.00 ( 1.96%) 500.00 ( 1.96%)
Amean elapsed 529.00 ( 0.00%) 521.00 ( 1.51%) 510.00 * 3.59%*
Stddev elapsed 16.63 ( 0.00%) 12.87 ( 22.64%) 11.55 ( 30.58%)
CoeffVar elapsed 3.14 ( 0.00%) 2.47 ( 21.46%) 2.26 ( 27.99%)
Max elapsed 550.00 ( 0.00%) 540.00 ( 1.82%) 530.00 ( 3.64%)
BAmean-50 elapsed 516.00 ( 0.00%) 512.00 ( 0.78%) 500.00 ( 3.10%)
BAmean-95 elapsed 526.67 ( 0.00%) 518.89 ( 1.48%) 507.78 ( 3.59%)
BAmean-99 elapsed 526.67 ( 0.00%) 518.89 ( 1.48%) 507.78 ( 3.59%)
The original motivation for multi-passes was will-it-scale page_fault1
using $nr_cpu processes.
2-socket CascadeLake (40 cores, 80 CPUs HT enabled)
5.17.0-rc3 5.17.0-rc3
vanilla mm-highpcpopt-v2
Hmean page_fault1-processes-2
2694662.26 ( 0.00%)
2695780.35 ( 0.04%)
Hmean page_fault1-processes-5
6425819.34 ( 0.00%)
6435544.57 * 0.15%*
Hmean page_fault1-processes-8
9642169.10 ( 0.00%)
9658962.39 ( 0.17%)
Hmean page_fault1-processes-12
12167502.10 ( 0.00%)
12190163.79 ( 0.19%)
Hmean page_fault1-processes-21
15636859.03 ( 0.00%)
15612447.26 ( -0.16%)
Hmean page_fault1-processes-30
25157348.61 ( 0.00%)
25169456.65 ( 0.05%)
Hmean page_fault1-processes-48
27694013.85 ( 0.00%)
27671111.46 ( -0.08%)
Hmean page_fault1-processes-79
25928742.64 ( 0.00%)
25934202.02 ( 0.02%) <--
Hmean page_fault1-processes-110
25730869.75 ( 0.00%)
25671880.65 * -0.23%*
Hmean page_fault1-processes-141
25626992.42 ( 0.00%)
25629551.61 ( 0.01%)
Hmean page_fault1-processes-172
25611651.35 ( 0.00%)
25614927.99 ( 0.01%)
Hmean page_fault1-processes-203
25577298.75 ( 0.00%)
25583445.59 ( 0.02%)
Hmean page_fault1-processes-234
25580686.07 ( 0.00%)
25608240.71 ( 0.11%)
Hmean page_fault1-processes-265
25570215.47 ( 0.00%)
25568647.58 ( -0.01%)
Hmean page_fault1-processes-296
25549488.62 ( 0.00%)
25543935.00 ( -0.02%)
Hmean page_fault1-processes-320
25555149.05 ( 0.00%)
25575696.74 ( 0.08%)
The differences are mostly within the noise and the difference close to
$nr_cpus is negligible.
Link: https://lkml.kernel.org/r/20220217002227.5739-6-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Mel Gorman [Mon, 28 Feb 2022 23:01:00 +0000 (10:01 +1100)]
mm/page_alloc: drain the requested list first during bulk free
Prior to the series, pindex 0 (order-0 MIGRATE_UNMOVABLE) was always
skipped first and the precise reason is forgotten. A potential reason may
have been to artificially preserve MIGRATE_UNMOVABLE but there is no
reason why that would be optimal as it depends on the workload. The more
likely reason is that it was less complicated to do a pre-increment
instead of a post-increment in terms of overall code flow. As
free_pcppages_bulk() now typically receives the pindex of the PCP list
that exceeded high, always start draining that list.
Link: https://lkml.kernel.org/r/20220217002227.5739-5-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Mel Gorman [Mon, 28 Feb 2022 23:00:59 +0000 (10:00 +1100)]
mm/page_alloc: simplify how many pages are selected per pcp list during bulk free
free_pcppages_bulk() selects pages to free by round-robining between
lists. Originally this was to evenly shrink pages by migratetype but
uneven freeing is inevitable due to high pages. Simplify list selection
by starting with a list that definitely has pages on it in
free_unref_page_commit() and for drain, it does not matter where draining
starts as all pages are removed.
Link: https://lkml.kernel.org/r/20220217002227.5739-4-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Mel Gorman [Mon, 28 Feb 2022 23:00:59 +0000 (10:00 +1100)]
mm/page_alloc: track range of active PCP lists during bulk free
free_pcppages_bulk() frees pages in a round-robin fashion. Originally,
this was dealing only with migratetypes but storing high-order pages means
that there can be many more empty lists that are uselessly checked. Track
the minimum and maximum active pindex to reduce the search space.
Link: https://lkml.kernel.org/r/20220217002227.5739-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Mel Gorman [Mon, 28 Feb 2022 23:00:58 +0000 (10:00 +1100)]
mm/page_alloc: fetch the correct pcp buddy during bulk free
Patch series "Follow-up on high-order PCP caching", v2.
Commit
44042b449872 ("mm/page_alloc: allow high-order pages to be stored
on the per-cpu lists") was primarily aimed at reducing the cost of SLUB
cache refills of high-order pages in two ways. Firstly, zone lock
acquisitions was reduced and secondly, there were fewer buddy list
modifications. This is a follow-up series fixing some issues that became
apparant after merging.
Patch 1 is a functional fix. It's harmless but inefficient.
Patches 2-5 reduce the overhead of bulk freeing of PCP pages. While the
overhead is small, it's cumulative and noticable when truncating large
files. The changelog for patch 4 includes results of a microbench that
deletes large sparse files with data in page cache. Sparse files were
used to eliminate filesystem overhead.
Patch 6 addresses issues with high-order PCP pages being stored on PCP
lists for too long. Pages freed on a CPU potentially may not be quickly
reused and in some cases this can increase cache miss rates. Details are
included in the changelog.
This patch (of 6):
free_pcppages_bulk() prefetches buddies about to be freed but the order
must also be passed in as PCP lists store multiple orders.
Link: https://lkml.kernel.org/r/20220217002227.5739-1-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20220217002227.5739-2-mgorman@techsingularity.net
Fixes:
44042b449872 ("mm/page_alloc: allow high-order pages to be stored on the per-cpu lists")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Alistair Popple [Mon, 28 Feb 2022 23:00:57 +0000 (10:00 +1100)]
mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn is
also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining
memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is not
enough room for ZONE_MOVABLE on that node.
Unfortunately this condition is not checked for. This leads to
zone_movable_pfn[] getting set to a pfn greater than the last pfn in a
node.
calculate_node_totalpages() then sets zone->present_pages to be greater
than zone->spanned_pages which is invalid, as spanned_pages represents the
maximum number of pages in a zone assuming no holes.
Subsequently it is possible free_area_init_core() will observe a zone of
size zero with present pages. In this case it will skip setting up the
zone, including the initialisation of free_lists[].
However populated_zone() checks zone->present_pages to see if a zone has
memory available. This is used by iterators such as walk_zones_in_node().
pagetypeinfo_showfree() uses this to walk the free_list of each zone in
each node, which are assumed to be initialised due to the zone not being
empty. As free_area_init_core() never initialised the free_lists[] this
results in the following kernel crash when trying to read
/proc/pagetypeinfo:
[ 67.534914] BUG: kernel NULL pointer dereference, address:
0000000000000000
[ 67.535429] #PF: supervisor read access in kernel mode
[ 67.535789] #PF: error_code(0x0000) - not-present page
[ 67.536128] PGD 0 P4D 0
[ 67.536305] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
[ 67.536696] CPU: 0 PID: 456 Comm: cat Not tainted 5.16.0 #461
[ 67.537096] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
[ 67.537638] RIP: 0010:pagetypeinfo_show+0x163/0x460
[ 67.537992] Code: 9e 82 e8 80 57 0e 00 49 8b 06 b9 01 00 00 00 4c 39 f0 75 16 e9 65 02 00 00 48 83 c1 01 48 81 f9 a0 86 01 00 0f 84 48 02 00 00 <48> 8b 00 4c 39 f0 75 e7 48 c7 c2 80 a2 e2 82 48 c7 c6 79 ef e3 82
[ 67.538259] RSP: 0018:
ffffc90001c4bd10 EFLAGS:
00010003
[ 67.538259] RAX:
0000000000000000 RBX:
ffff88801105f638 RCX:
0000000000000001
[ 67.538259] RDX:
0000000000000001 RSI:
000000000000068b RDI:
ffff8880163dc68b
[ 67.538259] RBP:
ffffc90001c4bd90 R08:
0000000000000001 R09:
ffff8880163dc67e
[ 67.538259] R10:
656c6261766f6d6e R11:
6c6261766f6d6e55 R12:
ffff88807ffb4a00
[ 67.538259] R13:
ffff88807ffb49f8 R14:
ffff88807ffb4580 R15:
ffff88807ffb3000
[ 67.538259] FS:
00007f9c83eff5c0(0000) GS:
ffff88807dc00000(0000) knlGS:
0000000000000000
[ 67.538259] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 67.538259] CR2:
0000000000000000 CR3:
0000000013c8e000 CR4:
0000000000350ef0
[ 67.538259] Call Trace:
[ 67.538259] <TASK>
[ 67.538259] seq_read_iter+0x128/0x460
[ 67.538259] ? aa_file_perm+0x1af/0x5f0
[ 67.538259] proc_reg_read_iter+0x51/0x80
[ 67.538259] ? lock_is_held_type+0xea/0x140
[ 67.538259] new_sync_read+0x113/0x1a0
[ 67.538259] vfs_read+0x136/0x1d0
[ 67.538259] ksys_read+0x70/0xf0
[ 67.538259] __x64_sys_read+0x1a/0x20
[ 67.538259] do_syscall_64+0x3b/0xc0
[ 67.538259] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 67.538259] RIP: 0033:0x7f9c83e23cce
[ 67.538259] Code: c0 e9 b6 fe ff ff 50 48 8d 3d 6e 13 0a 00 e8 c9 e3 01 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28
[ 67.538259] RSP: 002b:
00007fff116e1a08 EFLAGS:
00000246 ORIG_RAX:
0000000000000000
[ 67.538259] RAX:
ffffffffffffffda RBX:
0000000000020000 RCX:
00007f9c83e23cce
[ 67.538259] RDX:
0000000000020000 RSI:
00007f9c83a2c000 RDI:
0000000000000003
[ 67.538259] RBP:
00007f9c83a2c000 R08:
00007f9c83a2b010 R09:
0000000000000000
[ 67.538259] R10:
00007f9c83f2d7d0 R11:
0000000000000246 R12:
0000000000000000
[ 67.538259] R13:
0000000000000003 R14:
0000000000020000 R15:
0000000000020000
[ 67.538259] </TASK>
Fix this by checking that the aligned zone_movable_pfn[] does not exceed
the end of the node, and if it does skip creating a movable zone on this
node.
Link: https://lkml.kernel.org/r/20220215025831.2113067-1-apopple@nvidia.com
Fixes:
2a1e274acf0b ("Create the ZONE_MOVABLE zone")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Nathan Chancellor [Mon, 28 Feb 2022 23:00:57 +0000 (10:00 +1100)]
mm/page_alloc: mark pagesets as __maybe_unused
Commit
9983a9d577db ("locking/local_lock: Make the empty local_lock_*()
function a macro.") in the -tip tree converted the local_lock_*()
functions into macros, which causes a warning with clang with
CONFIG_PREEMPT_RT=n + CONFIG_DEBUG_LOCK_ALLOC=n:
mm/page_alloc.c:131:40: error: variable 'pagesets' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static DEFINE_PER_CPU(struct pagesets, pagesets) = {
^
1 error generated.
Prior to that change, clang was not able to tell that pagesets was unused
in this configuration because it does not perform cross function analysis
in the frontend. After that change, it sees that the macros just do a
typecheck on the lock member of pagesets, which is evaluated at compile
time (so the variable is technically "used"), meaning the variable is not
needed in the final assembly, as the warning states.
Mark the variable as __maybe_unused to make it clear to clang that this is
expected in this configuration so there is no more warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1593
Link: https://lkml.kernel.org/r/20220215184322.440969-1-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
David Hildenbrand [Mon, 28 Feb 2022 23:00:56 +0000 (10:00 +1100)]
mm: enforce pageblock_order < MAX_ORDER
Some places in the kernel don't really expect pageblock_order >=
MAX_ORDER, and it looks like this is only possible in corner cases:
1) CONFIG_DEFERRED_STRUCT_PAGE_INIT we'll end up freeing pageblock_order
pages via __free_pages_core(), which cannot possibly work.
2) find_zone_movable_pfns_for_nodes() will roundup the ZONE_MOVABLE
start PFN to MAX_ORDER_NR_PAGES. Consequently with a bigger
pageblock_order, we could have a single pageblock partially managed by
two zones.
3) compaction code runs into __fragmentation_index() with order
>= MAX_ORDER, when checking WARN_ON_ONCE(order >= MAX_ORDER). [1]
4) mm/page_reporting.c won't be reporting any pages with default
page_reporting_order == pageblock_order, as we'll be skipping the
reporting loop inside page_reporting_process_zone().
5) __rmqueue_fallback() will never be able to steal with
ALLOC_NOFRAGMENT.
pageblock_order >= MAX_ORDER is weird either way: it's a pure optimization
for making alloc_contig_range(), as used for allcoation of gigantic pages,
a little more reliable to succeed. However, if there is demand for
somewhat reliable allocation of gigantic pages, affected setups should be
using CMA or boottime allocations instead.
So let's make sure that pageblock_order < MAX_ORDER and simplify.
[1] https://lkml.kernel.org/r/87r189a2ks.fsf@linux.ibm.com
Link: https://lkml.kernel.org/r/20220214174132.219303-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: John Garry via iommu <iommu@lists.linux-foundation.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
David Hildenbrand [Mon, 28 Feb 2022 23:00:56 +0000 (10:00 +1100)]
cma: factor out minimum alignment requirement
Patch series "mm: enforce pageblock_order < MAX_ORDER".
Having pageblock_order >= MAX_ORDER seems to be able to happen in corner
cases and some parts of the kernel are not prepared for it.
For example, Aneesh has shown [1] that such kernels can be compiled on
ppc64 with 64k base pages by setting FORCE_MAX_ZONEORDER=8, which will run
into a WARN_ON_ONCE(order >= MAX_ORDER) in comapction code right during
boot.
We can get pageblock_order >= MAX_ORDER when the default hugetlb size is
bigger than the maximum allocation granularity of the buddy, in which case
we are no longer talking about huge pages but instead gigantic pages.
Having pageblock_order >= MAX_ORDER can only make alloc_contig_range() of
such gigantic pages more likely to succeed.
Reliable use of gigantic pages either requires boot time allcoation or
CMA, no need to overcomplicate some places in the kernel to optimize for
corner cases that are broken in other areas of the kernel.
This patch (of 2):
Let's enforce pageblock_order < MAX_ORDER and simplify.
Especially patch #1 can be regarded a cleanup before:
[PATCH v5 0/6] Use pageblock_order for cma and alloc_contig_range
alignment. [2]
[1] https://lkml.kernel.org/r/87r189a2ks.fsf@linux.ibm.com
[2] https://lkml.kernel.org/r/
20220211164135.
1803616-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20220214174132.219303-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: John Garry via iommu <iommu@lists.linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Nicolas Saenz Julienne [Mon, 28 Feb 2022 23:00:55 +0000 (10:00 +1100)]
mm/page_alloc: don't pass pfn to free_unref_page_commit()
free_unref_page_commit() doesn't make use of its pfn argument, so get
rid of it.
Link: https://lkml.kernel.org/r/20220202140451.415928-1-nsaenzju@redhat.com
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Miaohe Lin [Mon, 28 Feb 2022 23:00:54 +0000 (10:00 +1100)]
mm/mmzone.h: remove unused macros
Remove pgdat_page_nr, nid_page_nr and NODE_MEM_MAP. They are unused now.
Link: https://lkml.kernel.org/r/20220127093210.62293-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
NeilBrown [Mon, 28 Feb 2022 23:00:54 +0000 (10:00 +1100)]
mm: discard __GFP_ATOMIC
__GFP_ATOMIC serves little purpose. Its main effect is to set
ALLOC_HARDER which adds a few little boosts to increase the chance of an
allocation succeeding, one of which is to lower the water-mark at which it
will succeed.
It is *always* paired with __GFP_HIGH which sets ALLOC_HIGH which also
adjusts this watermark. It is probable that other users of __GFP_HIGH
should benefit from the other little bonuses that __GFP_ATOMIC gets.
__GFP_ATOMIC also gives a warning if used with __GFP_DIRECT_RECLAIM.
There is little point to this. We already get a might_sleep() warning if
__GFP_DIRECT_RECLAIM is set.
__GFP_ATOMIC allows the "watermark_boost" to be side-stepped. It is
probable that testing ALLOC_HARDER is a better fit here.
__GFP_ATOMIC is used by tegra-smmu.c to check if the allocation might
sleep. This should test __GFP_DIRECT_RECLAIM instead.
This patch:
- removes __GFP_ATOMIC
- causes __GFP_HIGH to set ALLOC_HARDER unless __GFP_NOMEMALLOC is set
(as well as ALLOC_HIGH).
- makes other adjustments as suggested by the above.
The net result is not change to GFP_ATOMIC allocations. Other
allocations that use __GFP_HIGH will benefit from a few different extra
privileges. This affects:
xen, dm, md, ntfs3
the vermillion frame buffer
hibernation
ksm
swap
all of which likely produce more benefit than cost if these selected
allocation are more likely to succeed quickly.
Link: https://lkml.kernel.org/r/163712397076.13692.4727608274002939094@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Peter Collingbourne [Mon, 28 Feb 2022 23:00:53 +0000 (10:00 +1100)]
mm/mmzone.c: use try_cmpxchg() in page_cpupid_xchg_last()
This will let us avoid an additional read from page->flags when retrying
the compare-exchange on some architectures.
Link: https://lkml.kernel.org/r/20220120011200.1322836-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/I2e1f5b5b080ac9c4e0eb7f98768dba6fd7821693
Signed-off-by: Peter Collingbourne <pcc@google.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Wei Yang [Mon, 28 Feb 2022 23:00:52 +0000 (10:00 +1100)]
mm/page_alloc: add penalty to local_node
Commit
54d032ced983 ("mm/page_alloc: use accumulated load when building
node fallback list") fixed a bug on zonelist order. This made me think
about what would happen if we have a node system with the following
distance matrix.
Node 0 1 2 3 4 5 6 7
----------------------------
0 10 12 12 12 32 32 32 32
1 12 10 12 12 32 32 32 32
2 12 12 10 12 32 32 32 32
3 12 12 12 10 32 32 32 32
4 32 32 32 32 10 12 12 12
5 32 32 32 32 12 10 12 12
6 32 32 32 32 12 12 10 12
7 32 32 32 32 12 12 12 10
Unfortunately for this case, the node fallback list gets built like this:
Node Fallback list
---------------------
0: 0 1 2 3 4 5 6 7
1: 1 0 2 3 5 6 7 4
2: 2 3 0 1 6 7 4 5
3: 3 2 0 1 7 4 5 6
4: 4 5 6 7 0 1 2 3
5: 5 4 6 7 1 2 3 0
6: 6 7 4 5 2 3 0 1
7: 7 6 4 5 3 0 1 2
We found the order in diagonal block is not expected. The reason is we
don't penaltize local node.
After penalizing local node, the node fallback list gets built like this:
Node Fallback list
---------------------
0: 0 1 2 3 4 5 6 7
1: 1 2 3 0 5 6 7 4
2: 2 3 0 1 6 7 4 5
3: 3 0 1 2 7 4 5 6
4: 4 5 6 7 0 1 2 3
5: 5 6 7 4 1 2 3 0
6: 6 7 4 5 2 3 0 1
7: 7 4 5 6 3 0 1 2
Now the fallback list is in round-robin order.
I am not very familiar with the node distance pattern, while I tried the
following distance matrix. Both of them works with this change.
Node 0 1 2 3
----------------
0 10 10 10 10
1 10 10 10 10
2 10 10 10 10
3 10 10 10 10
Node 0 1 2 3 4 5 6 7
----------------------------
0 10 10 10 10 32 32 32 32
1 10 10 10 10 32 32 32 32
2 10 10 10 10 32 32 32 32
3 10 10 10 10 32 32 32 32
4 32 32 32 32 10 10 10 10
5 32 32 32 32 10 10 10 10
6 32 32 32 32 10 10 10 10
7 32 32 32 32 10 10 10 10
Link: https://lkml.kernel.org/r/20220123013537.20491-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Krupa Ramakrishnan <krupa.ramakrishnan@amd.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Wei Yang [Mon, 28 Feb 2022 23:00:52 +0000 (10:00 +1100)]
mm/page_alloc: adding same penalty is enough to get round-robin order
To make node order in round-robin in the same distance group, we add a
penalty to the first node we got in each round.
To get a round-robin order in the same distance group, we don't need to
decrease the penalty since:
* find_next_best_node() always iterates node in the same order
* distance matters more then penalty in find_next_best_node()
* in nodes with the same distance, the first one would be picked up
So it is fine to increase same penalty when we get the first node in the
same distance group.
Link: https://lkml.kernel.org/r/20220123013537.20491-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Krupa Ramakrishnan <krupa.ramakrishnan@amd.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Zi Yan [Mon, 28 Feb 2022 23:00:51 +0000 (10:00 +1100)]
mm: page_alloc: avoid merging non-fallbackable pageblocks with others
This is done in addition to MIGRATE_ISOLATE pageblock merge avoidance. It
prepares for the upcoming removal of the MAX_ORDER-1 alignment requirement
for CMA and alloc_contig_range().
MIGRATE_HIGHATOMIC should not merge with other migratetypes like
MIGRATE_ISOLATE and MIGRARTE_CMA[1], so this commit prevents that too.
Remove MIGRATE_CMA and MIGRATE_ISOLATE from fallbacks list, since they
are never used.
[1] https://lore.kernel.org/linux-mm/
20211130100853.GP3366@techsingularity.net/
Link: https://lkml.kernel.org/r/20220124175957.1261961-1-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Yury Norov [Mon, 28 Feb 2022 23:00:50 +0000 (10:00 +1100)]
mm/vmalloc.c: vmap(): don't allow invalid pages
vmap() takes struct page *pages as one of arguments, and user may provide
an invalid pointer which would lead to data abort at address translation
later.
Currently, kernel checks the pages against NULL. In my case, however, the
address was not NULL, and was big enough so that the hardware generated
Address Size Abort on arm64.
Interestingly, this abort happens even if copy_from_kernel_nofault() is
used, which is quite inconvenient for debugging purposes.
This patch adds a pfn_valid() check into vmap() path, so that invalid
mapping will not be created.
Link: https://lkml.kernel.org/r/20220119012109.551931-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Jiapeng Chong [Mon, 28 Feb 2022 23:00:49 +0000 (10:00 +1100)]
mm/vmalloc.c: fix "unused function" warning
compute_subtree_max_size() is unused, when building with
DEBUG_AUGMENT_PROPAGATE_CHECK=y.
mm/vmalloc.c:785:1: warning: unused function 'compute_subtree_max_size'
[-Wunused-function].
Link: https://lkml.kernel.org/r/20220129034652.75359-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Uladzislau Rezki (Sony) [Mon, 28 Feb 2022 23:00:48 +0000 (10:00 +1100)]
mm/vmalloc: eliminate an extra orig_gfp_mask
That extra variable has been introduced just for keeping an original
passed gfp_mask because it is updated with __GFP_NOWARN on entry, thus
error handling messages were broken.
Instead we can keep an original gfp_mask without modifying it and add an
extra __GFP_NOWARN flag together with gfp_mask as a parameter to the
vm_area_alloc_pages() function. It will make it less confused.
Link: https://lkml.kernel.org/r/20220119143540.601149-3-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Uladzislau Rezki [Mon, 28 Feb 2022 23:00:48 +0000 (10:00 +1100)]
mm/vmalloc: add adjust_search_size parameter
Extend the find_vmap_lowest_match() function with one more parameter. It
is "adjust_search_size" boolean variable, so it is possible to control an
accuracy of search block if a specific alignment is required.
With this patch, a search size is always adjusted, to serve a request as
fast as possible because of performance reason.
But there is one exception though, it is short ranges where requested size
corresponds to passed vstart/vend restriction together with a specific
alignment request. In such scenario an adjustment wold not lead to
success allocation.
Link: https://lkml.kernel.org/r/20220119143540.601149-2-urezki@gmail.com
Signed-off-by: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Uladzislau Rezki (Sony) [Mon, 28 Feb 2022 23:00:47 +0000 (10:00 +1100)]
mm/vmalloc: Move draining areas out of caller context
A caller initiates the drain procces from its context once the
drain threshold is reached or passed. There are at least two
drawbacks of doing so:
a) a caller can be a high-prio or RT task. In that case it can
stuck in doing the actual drain of all lazily freed areas.
This is not optimal because such tasks usually are latency
sensitive where the control should be returned back as soon
as possible in order to drive such workloads in time. See
96e2db456135 ("mm/vmalloc: rework the drain logic")
b) It is not safe to call vfree() during holding a spinlock due
to the vmap_purge_lock mutex. The was a report about this from
Zeal Robot <zealci@zte.com.cn> here:
https://lore.kernel.org/all/
20211222081026.484058-1-chi.minghao@zte.com.cn
Moving the drain to the separate work context addresses those
issues.
v1->v2:
- Added prefix "_work" to the drain worker function.
v2->v3:
- Remove the drain_vmap_work_in_progress. Extra queuing
is expectable under heavy load but it can be disregarded
because a work will bail out if nothing to be done.
Link: https://lkml.kernel.org/r/20220131144058.35608-1-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Miaohe Lin [Mon, 28 Feb 2022 23:00:46 +0000 (10:00 +1100)]
mm/vmalloc: remove unneeded function forward declaration
The forward declaration for lazy_max_pages() is unnecessary. Remove it.
Link: https://lkml.kernel.org/r/20220124133752.60663-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Miaohe Lin [Mon, 28 Feb 2022 23:00:45 +0000 (10:00 +1100)]
mm/sparse: make mminit_validate_memmodel_limits() static
It's only used in the sparse.c now. So we can make it static and further
clean up the relevant code.
Link: https://lkml.kernel.org/r/20220127093221.63524-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Miaohe Lin [Mon, 28 Feb 2022 23:00:44 +0000 (10:00 +1100)]
mm/memory.c: use helper macro min and max in unmap_mapping_range_tree()
Use helper macro min and max to help simplify the code logic. Minor
readability improvement.
Link: https://lkml.kernel.org/r/20220224121134.35068-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Miaohe Lin [Mon, 28 Feb 2022 23:00:44 +0000 (10:00 +1100)]
mm/memory.c: use helper function range_in_vma()
Use helper function range_in_vma() to check if address, address + size are
within the vma range. Minor readability improvement.
Link: https://lkml.kernel.org/r/20220219021441.29173-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Randy Dunlap [Mon, 28 Feb 2022 23:00:43 +0000 (10:00 +1100)]
mm/mmap: return 1 from stack_guard_gap __setup() handler
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment). This prevents:
Unknown kernel command line parameters \
"BOOT_IMAGE=/boot/bzImage-517rc5 stack_guard_gap=100", will be \
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
stack_guard_gap=100
Return 1 to indicate that the boot option has been handled.
Note that there is no warning message if someone enters:
stack_guard_gap=anything_invalid
and 'val' and stack_guard_gap are both set to 0 due to the use of
simple_strtoul(). This could be improved by using kstrtoxxx() and
checking for an error.
It appears that having stack_guard_gap == 0 is valid (if unexpected) since
using "stack_guard_gap=0" on the kernel command line does that.
Link: https://lkml.kernel.org/r/20220222005817.11087-1-rdunlap@infradead.org
Link: lore.kernel.org/r/
64644a2f-4a20-bab3-1e15-
3b2cdd0defe3@omprussia.ru
Fixes:
1be7107fbe18e ("mm: larger stack guard gap, between vmas")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Peter Xu [Mon, 28 Feb 2022 23:00:42 +0000 (10:00 +1100)]
mm: rework swap handling of zap_pte_range
Clean the code up by merging the device private/exclusive swap entry
handling with the rest, then we merge the pte clear operation too.
struct* page is defined in multiple places in the function, move it upward.
free_swap_and_cache() is only useful for !non_swap_entry() case, put it
into the condition.
No functional change intended.
Link: https://lkml.kernel.org/r/20220216094810.60572-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Peter Xu [Mon, 28 Feb 2022 23:00:41 +0000 (10:00 +1100)]
mm: change zap_details.zap_mapping into even_cows
Currently we have a zap_mapping pointer maintained in zap_details, when it
is specified we only want to zap the pages that has the same mapping with
what the caller has specified.
But what we want to do is actually simpler: we want to skip zapping
private (COW-ed) pages in some cases. We can refer to
unmap_mapping_pages() callers where we could have passed in different
even_cows values. The other user is unmap_mapping_folio() where we always
want to skip private pages.
According to Hugh, we used a mapping pointer for historical reason, as
explained here:
https://lore.kernel.org/lkml/
391aa58d-ce84-9d4-d68d-
d98a9c533255@google.com/
Quoting partly from Hugh:
Which raises the question again of why I did not just use a boolean flag
there originally: aah, I think I've found why. In those days there was a
horrible "optimization", for better performance on some benchmark I guess,
which when you read from /dev/zero into a private mapping, would map the zero
page there (look up read_zero_pagealigned() and zeromap_page_range() if you
dare). So there was another category of page to be skipped along with the
anon COWs, and I didn't want multiple tests in the zap loop, so checking
check_mapping against page->mapping did both. I think nowadays you could do
it by checking for PageAnon page (or genuine swap entry) instead.
This patch replaces the zap_details.zap_mapping pointer into the even_cows
boolean, then we check it against PageAnon.
Link: https://lkml.kernel.org/r/20220216094810.60572-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Peter Xu [Mon, 28 Feb 2022 23:00:40 +0000 (10:00 +1100)]
mm: rename zap_skip_check_mapping() to should_zap_page()
The previous name is against the natural way people think. Invert the
meaning and also the return value. No functional change intended.
Link: https://lkml.kernel.org/r/20220216094810.60572-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Peter Xu [Mon, 28 Feb 2022 23:00:39 +0000 (10:00 +1100)]
mm-dont-skip-swap-entry-even-if-zap_details-specified-v5
comment tweaks
Link: https://lkml.kernel.org/r/20220217060746.71256-2-peterx@redhat.com
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Peter Xu [Mon, 28 Feb 2022 23:00:38 +0000 (10:00 +1100)]
mm: don't skip swap entry even if zap_details specified
Patch series "mm: Rework zap ptes on swap entries", v5.
Patch 1 should fix a long standing bug for zap_pte_range() on zap_details
usage. The risk is we could have some swap entries skipped while we should
have zapped them.
Migration entries are not the major concern because file backed memory always
zap in the pattern that "first time without page lock, then re-zap with page
lock" hence the 2nd zap will always make sure all migration entries are already
recovered.
However there can be issues with real swap entries got skipped errornoously.
There's a reproducer provided in commit message of patch 1 for that.
Patch 2-4 are cleanups that are based on patch 1. After the whole patchset
applied, we should have a very clean view of zap_pte_range().
Only patch 1 needs to be backported to stable if necessary.
This patch (of 4):
The "details" pointer shouldn't be the token to decide whether we should
skip swap entries.
For example, when the callers specified details->zap_mapping==NULL, it
means the user wants to zap all the pages (including COWed pages), then we
need to look into swap entries because there can be private COWed pages
that was swapped out.
Skipping some swap entries when details is non-NULL may lead to wrongly
leaving some of the swap entries while we should have zapped them.
A reproducer of the problem:
===8<===
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <stdio.h>
#include <assert.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/types.h>
int page_size;
int shmem_fd;
char *buffer;
void main(void)
{
int ret;
char val;
page_size = getpagesize();
shmem_fd = memfd_create("test", 0);
assert(shmem_fd >= 0);
ret = ftruncate(shmem_fd, page_size * 2);
assert(ret == 0);
buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE,
MAP_PRIVATE, shmem_fd, 0);
assert(buffer != MAP_FAILED);
/* Write private page, swap it out */
buffer[page_size] = 1;
madvise(buffer, page_size * 2, MADV_PAGEOUT);
/* This should drop private buffer[page_size] already */
ret = ftruncate(shmem_fd, page_size);
assert(ret == 0);
/* Recover the size */
ret = ftruncate(shmem_fd, page_size * 2);
assert(ret == 0);
/* Re-read the data, it should be all zero */
val = buffer[page_size];
if (val == 0)
printf("Good\n");
else
printf("BUG\n");
}
===8<===
We don't need to touch up the pmd path, because pmd never had a issue with
swap entries. For example, shmem pmd migration will always be split into
pte level, and same to swapping on anonymous.
Add another helper should_zap_cows() so that we can also check whether we
should zap private mappings when there's no page pointer specified.
This patch drops that trick, so we handle swap ptes coherently. Meanwhile
we should do the same check upon migration entry, hwpoison entry and
genuine swap entries too.
To be explicit, we should still remember to keep the private entries if
even_cows==false, and always zap them when even_cows==true.
The issue seems to exist starting from the initial commit of git.
Link: https://lkml.kernel.org/r/20220217060746.71256-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220216094810.60572-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220216094810.60572-2-peterx@redhat.com
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:37 +0000 (10:00 +1100)]
mm: replace multiple dcache flush with flush_dcache_folio()
Simplify the code by using flush_dcache_folio().
Link: https://lkml.kernel.org/r/20220210123058.79206-8-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:36 +0000 (10:00 +1100)]
mm: userfaultfd: fix missing cache flush in mcopy_atomic_pte() and __mcopy_atomic()
userfaultfd calls mcopy_atomic_pte() and __mcopy_atomic() which do not do
any cache flushing for the target page. Then the target page will be
mapped to the user space with a different address (user address), which
might have an alias issue with the kernel address used to copy the data
from the user to. Fix this by insert flush_dcache_page() after
copy_from_user() succeeds.
Link: https://lkml.kernel.org/r/20220210123058.79206-7-songmuchun@bytedance.com
Fixes:
b6ebaedb4cb1 ("userfaultfd: avoid mmap_sem read recursion in mcopy_atomic")
Fixes:
c1a4de99fada ("userfaultfd: mcopy_atomic|mfill_zeropage: UFFDIO_COPY|UFFDIO_ZEROPAGE preparation")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:35 +0000 (10:00 +1100)]
mm: shmem: fix missing cache flush in shmem_mfill_atomic_pte()
userfaultfd calls shmem_mfill_atomic_pte() which does not do any cache
flushing for the target page. Then the target page will be mapped to the
user space with a different address (user address), which might have an
alias issue with the kernel address used to copy the data from the user
to. Insert flush_dcache_page() in non-zero-page case. And replace
clear_highpage() with clear_user_highpage() which already considers the
cache maintenance.
Link: https://lkml.kernel.org/r/20220210123058.79206-6-songmuchun@bytedance.com
Fixes:
8d1039634206 ("userfaultfd: shmem: add shmem_mfill_zeropage_pte for userfaultfd support")
Fixes:
4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:34 +0000 (10:00 +1100)]
mm: hugetlb: fix missing cache flush in hugetlb_mcopy_atomic_pte()
folio_copy() will copy the data from one page to the target page, then the
target page will be mapped to the user space address, which might have an
alias issue with the kernel address used to copy the data from the page
to. There are 2 ways to fix this issue.
1) insert flush_dcache_page() after folio_copy().
2) replace folio_copy() with copy_user_huge_page() which already
considers the cache maintenance.
We chose 2) way to fix the issue since architectures can optimize this
situation. It is also make backports easier.
Link: https://lkml.kernel.org/r/20220210123058.79206-5-songmuchun@bytedance.com
Fixes:
8cc5fcbb5be8 ("mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:33 +0000 (10:00 +1100)]
mm: hugetlb: fix missing cache flush in copy_huge_page_from_user()
userfaultfd calls copy_huge_page_from_user() which does not do any cache
flushing for the target page. Then the target page will be mapped to the
user space with a different address (user address), which might have an
alias issue with the kernel address used to copy the data from the user
to. Fix this issue by flushing dcache in copy_huge_page_from_user().
Link: https://lkml.kernel.org/r/20220210123058.79206-4-songmuchun@bytedance.com
Fixes:
fa4d75c1de13 ("userfaultfd: hugetlbfs: add copy_huge_page_from_user for hugetlb userfaultfd support")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:33 +0000 (10:00 +1100)]
mm: fix missing cache flush for all tail pages of compound page
The D-cache maintenance inside move_to_new_page() only consider one page,
there is still D-cache maintenance issue for tail pages of compound page
(e.g. THP or HugeTLB).
THP migration is only enabled on x86_64, ARM64 and powerpc, while powerpc
and arm64 need to maintain the consistency between I-Cache and D-Cache,
which depends on flush_dcache_page() to maintain the consistency between
I-Cache and D-Cache.
But there is no issues on arm64 and powerpc since they already considers
the compound page cache flushing in their icache flush function. HugeTLB
migration is enabled on arm, arm64, mips, parisc, powerpc, riscv, s390 and
sh, while arm has handled the compound page cache flush in
flush_dcache_page(), but most others do not.
In theory, the issue exists on many architectures. Fix this by not using
flush_dcache_folio() since it is not backportable.
Link: https://lkml.kernel.org/r/20220210123058.79206-3-songmuchun@bytedance.com
Fixes:
290408d4a250 ("hugetlb: hugepage migration core")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:32 +0000 (10:00 +1100)]
mm: thp: fix wrong cache flush in remove_migration_pmd()
Patch series "Fix some cache flush bugs", v5.
This series focuses on fixing cache maintenance.
This patch (of 7):
The flush_cache_range() is supposed to be justified only if the page is
already placed in process page table, and that is done right after
flush_cache_range(). So using this interface is wrong. And there is no
need to invalite cache since it was non-present before in
remove_migration_pmd(). So just to remove it.
Link: https://lkml.kernel.org/r/20220210123058.79206-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20220210123058.79206-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Stafford Horne [Mon, 28 Feb 2022 23:00:31 +0000 (10:00 +1100)]
mm: remove mmu_gathers storage from remaining architectures
Originally the mmu_gathers were removed in commit
1c3951769621 ("mm: now
that all old mmu_gather code is gone, remove the storage"). However, the
openrisc and hexagon architecture were merged around the same time and
mmu_gathers was not removed.
This patch removes them from openrisc, hexagon and nds32:
Noticed while cleaning this warning:
arch/openrisc/mm/init.c:41:1: warning: symbol 'mmu_gathers' was not declared. Should it be static?
Link: https://lkml.kernel.org/r/20220205141956.3315419-1-shorne@gmail.com
Signed-off-by: Stafford Horne <shorne@gmail.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Anshuman Khandual [Mon, 28 Feb 2022 23:00:30 +0000 (10:00 +1100)]
mm: merge pte_mkhuge() call into arch_make_huge_pte()
Each call into pte_mkhuge() is invariably followed by
arch_make_huge_pte(). Instead arch_make_huge_pte() can accommodate
pte_mkhuge() at the beginning. This updates generic fallback stub for
arch_make_huge_pte() and available platforms definitions. This makes huge
pte creation much cleaner and easier to follow.
Link: https://lkml.kernel.org/r/1643860669-26307-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Anshuman Khandual [Mon, 28 Feb 2022 23:00:29 +0000 (10:00 +1100)]
mm: generalize ARCH_HAS_FILTER_PGPROT
ARCH_HAS_FILTER_PGPROT config has duplicate definitions on platforms that
subscribe it. Instead make it a generic config option which can be
selected on applicable platforms when required.
Link: https://lkml.kernel.org/r/1643004823-16441-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Vasily Averin [Mon, 28 Feb 2022 23:00:28 +0000 (10:00 +1100)]
memcg: enable accounting for tty-related objects
At each login the user forces the kernel to create a new terminal and
allocate up to ~1Kb memory for the tty-related structures.
By default it's allowed to create up to 4096 ptys with 1024 reserve for
initial mount namespace only and the settings are controlled by host
admin.
Though this default is not enough for hosters with thousands of containers
per node. Host admin can be forced to increase it up to NR_UNIX98_PTY_MAX
= 1<<20.
By default container is restricted by pty mount_opt.max = 1024, but admin
inside container can change it via remount. As a result, one container
can consume almost all allowed ptys and allocate up to 1Gb of unaccounted
memory.
It is not enough per-se to trigger OOM on host, however anyway, it allows
to significantly exceed the assigned memcg limit and leads to troubles on
the over-committed node.
It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.
Link: https://lkml.kernel.org/r/5d4bca06-7d4f-a905-e518-12981ebca1b3@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:27 +0000 (10:00 +1100)]
mm: memcontrol: rename memcg_cache_id to memcg_kmem_id
The memcg_cache_id() introduced by commit
2633d7a02823 ("slab/slub:
consider a memcg parameter in kmem_create_cache") is used to index in the
kmem_cache->memcg_params->memcg_caches array. Since
kmem_cache->memcg_params.memcg_caches has been removed by commit
9855609bde03 ("mm: memcg/slab: use a single set of kmem_caches for all
accounted allocations"). So the name does not need to reflect cache
related. Just rename it to memcg_kmem_id. And it can reflect kmem
related.
Link: https://lkml.kernel.org/r/20220228122126.37293-17-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:26 +0000 (10:00 +1100)]
mm: list_lru: rename list_lru_per_memcg to list_lru_memcg
The name of list_lru_memcg was occupied before and became free since last
commit. Rename list_lru_per_memcg to list_lru_memcg since the name is
brief.
Link: https://lkml.kernel.org/r/20220228122126.37293-16-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:25 +0000 (10:00 +1100)]
mm: memcontrol: fix cannot alloc the maximum memcg ID
The idr_alloc() does not include @max ID. So in the current
implementation, the maximum memcg ID is 65534 instead of 65535. It seems
a bug. So fix this.
Link: https://lkml.kernel.org/r/20220228122126.37293-15-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:23 +0000 (10:00 +1100)]
mm: memcontrol: reuse memory cgroup ID for kmem ID
There are two idrs being used by memory cgroup, one is for kmem ID,
another is for memory cgroup ID. The maximum ID of both is 64Ki. Both of
them can limit the total number of memory cgroups. Actually, we can reuse
memory cgroup ID for kmem ID to simplify the code.
Link: https://lkml.kernel.org/r/20220228122126.37293-14-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Andrew Morton [Mon, 28 Feb 2022 23:00:22 +0000 (10:00 +1100)]
mm-list_lru-replace-linear-array-with-xarray-fix
remove unused local
mm/list_lru.c: In function 'memcg_list_lru_alloc':
mm/list_lru.c:477:32: error: unused variable 'mlrus' [-Werror=unused-variable]
477 | struct list_lru_memcg *mlrus;
| ^~~~~
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:21 +0000 (10:00 +1100)]
mm: list_lru: replace linear array with xarray
If we run 10k containers in the system, the size of the
list_lru_memcg->lrus can be ~96KB per list_lru. When we decrease the
number containers, the size of the array will not be shrinked. It is not
scalable. The xarray is a good choice for this case. We can save a lot
of memory when there are tens of thousands continers in the system. If we
use xarray, we also can remove the logic code of resizing array, which can
simplify the code.
Link: https://lkml.kernel.org/r/20220228122126.37293-13-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:20 +0000 (10:00 +1100)]
mm: list_lru: rename memcg_drain_all_list_lrus to memcg_reparent_list_lrus
The purpose of the memcg_drain_all_list_lrus() is list_lrus reparenting.
It is very similar to memcg_reparent_objcgs(). Rename it to
memcg_reparent_list_lrus() so that the name can more consistent with
memcg_reparent_objcgs().
Link: https://lkml.kernel.org/r/20220228122126.37293-12-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:19 +0000 (10:00 +1100)]
mm: list_lru: allocate list_lru_one only when needed
In our server, we found a suspected memory leak problem. The kmalloc-32
consumes more than 6GB of memory. Other kmem_caches consume less than 2GB
memory.
After our in-depth analysis, the memory consumption of kmalloc-32 slab
cache is the cause of list_lru_one allocation.
crash> p memcg_nr_cache_ids
memcg_nr_cache_ids = $2 = 24574
memcg_nr_cache_ids is very large and memory consumption of each list_lru
can be calculated with the following formula.
num_numa_node * memcg_nr_cache_ids * 32 (kmalloc-32)
There are 4 numa nodes in our system, so each list_lru consumes ~3MB.
crash> list super_blocks | wc -l
952
Every mount will register 2 list lrus, one is for inode, another is for
dentry. There are 952 super_blocks. So the total memory is 952 * 2 * 3
MB (~5.6GB). But the number of memory cgroup is less than 500. So I
guess more than 12286 containers have been deployed on this machine (I do
not know why there are so many containers, it may be a user's bug or the
user really want to do that). And memcg_nr_cache_ids has not been reduced
to a suitable value. This can waste a lot of memory.
Now the infrastructure for dynamic list_lru_one allocation is ready, so
remove statically allocated memory code to save memory.
Link: https://lkml.kernel.org/r/20220228122126.37293-11-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:18 +0000 (10:00 +1100)]
mm: memcontrol: move memcg_online_kmem() to mem_cgroup_css_online()
It will simplify the code if moving memcg_online_kmem() to
mem_cgroup_css_online() and do not need to set ->kmemcg_id to -1 to
indicate the memcg is offline. In the next patch, ->kmemcg_id will be
used to sync list lru reparenting which requires not to change
->kmemcg_id.
Link: https://lkml.kernel.org/r/20220228122126.37293-10-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:18 +0000 (10:00 +1100)]
xarray: use kmem_cache_alloc_lru to allocate xa_node
The workingset will add the xa_node to the shadow_nodes list. So the
allocation of xa_node should be done by kmem_cache_alloc_lru(). Using
xas_set_lru() to pass the list_lru which we want to insert xa_node into to
set up the xa_node reclaim context correctly.
Link: https://lkml.kernel.org/r/20220228122126.37293-9-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:17 +0000 (10:00 +1100)]
mm: dcache: use kmem_cache_alloc_lru() to allocate dentry
Like inode cache, the dentry will also be added to its memcg list_lru. So
replace kmem_cache_alloc() with kmem_cache_alloc_lru() to allocate dentry.
Link: https://lkml.kernel.org/r/20220228122126.37293-8-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:16 +0000 (10:00 +1100)]
f2fs: allocate inode by using alloc_inode_sb()
The inode allocation is supposed to use alloc_inode_sb(), so convert
kmem_cache_alloc() to alloc_inode_sb().
Link: https://lkml.kernel.org/r/20220228122126.37293-6-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:15 +0000 (10:00 +1100)]
fs: allocate inode by using alloc_inode_sb()
The inode allocation is supposed to use alloc_inode_sb(), so convert
kmem_cache_alloc() of all filesystems to alloc_inode_sb().
Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4]
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:14 +0000 (10:00 +1100)]
fs: introduce alloc_inode_sb() to allocate filesystems specific inode
The allocated inode cache is supposed to be added to its memcg list_lru
which should be allocated as well in advance. That can be done by
kmem_cache_alloc_lru() which allocates object and list_lru. The file
systems is main user of it. So introduce alloc_inode_sb() to allocate
file system specific inodes and set up the inode reclaim context properly.
The file system is supposed to use alloc_inode_sb() to allocate inodes.
In the later patches, we will convert all users to the new API.
Link: https://lkml.kernel.org/r/20220228122126.37293-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:13 +0000 (10:00 +1100)]
mm: introduce kmem_cache_alloc_lru
We currently allocate scope for every memcg to be able to tracked on every
superblock instantiated in the system, regardless of whether that
superblock is even accessible to that memcg.
These huge memcg counts come from container hosts where memcgs are
confined to just a small subset of the total number of superblocks that
instantiated at any given point in time.
For these systems with huge container counts, list_lru does not need the
capability of tracking every memcg on every superblock. What it comes
down to is that adding the memcg to the list_lru at the first insert. So
introduce kmem_cache_alloc_lru to allocate objects and its list_lru. In
the later patch, we will convert all inode and dentry allocation from
kmem_cache_alloc to kmem_cache_alloc_lru.
Link: https://lkml.kernel.org/r/20220228122126.37293-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Muchun Song [Mon, 28 Feb 2022 23:00:12 +0000 (10:00 +1100)]
mm: list_lru: transpose the array of per-node per-memcg lru lists
Patch series "Optimize list lru memory consumption", v6.
In our server, we found a suspected memory leak problem. The kmalloc-32
consumes more than 6GB of memory. Other kmem_caches consume less than 2GB
memory.
After our in-depth analysis, the memory consumption of kmalloc-32 slab
cache is the cause of list_lru_one allocation.
crash> p
memcg_nr_cache_ids memcg_nr_cache_ids = $2 = 24574
memcg_nr_cache_ids is very large and memory consumption of each list_lru
can be calculated with the following formula.
num_numa_node * memcg_nr_cache_ids * 32 (kmalloc-32)
There are 4 numa nodes in our system, so each list_lru consumes ~3MB.
crash> list super_blocks | wc -l
952
Every mount will register 2 list lrus, one is for inode, another is for
dentry. There are 952 super_blocks. So the total memory is 952 * 2 * 3
MB (~5.6GB). But now the number of memory cgroups is less than 500. So I
guess more than 12286 memory cgroups have been created on this machine (I
do not know why there are so many cgroups, it may be a user's bug or the
user really want to do that). Because memcg_nr_cache_ids has not been
reduced to a suitable value. It leads to waste a lot of memory. If we
want to reduce memcg_nr_cache_ids, we have to *reboot* the server. This
is not what we want.
In order to reduce memcg_nr_cache_ids, I had posted a patchset [1] to do
this. But this did not fundamentally solve the problem.
We currently allocate scope for every memcg to be able to tracked on every
superblock instantiated in the system, regardless of whether that
superblock is even accessible to that memcg.
These huge memcg counts come from container hosts where memcgs are
confined to just a small subset of the total number of superblocks that
instantiated at any given point in time.
For these systems with huge container counts, list_lru does not need the
capability of tracking every memcg on every superblock.
What it comes down to is that the list_lru is only needed for a given
memcg if that memcg is instatiating and freeing objects on a given
list_lru.
As Dave said, "Which makes me think we should be moving more towards 'add
the memcg to the list_lru at the first insert' model rather than
'instantiate all at memcg init time just in case'."
This patchset aims to optimize the list lru memory consumption from
different aspects.
I had done a easy test to show the optimization. I create 10k memory
cgroups and mount 10k filesystems in the systems. We use free command to
show how many memory does the systems comsumes after this operation (There
are 2 numa nodes in the system).
+-----------------------+------------------------+
| condition | memory consumption |
+-----------------------+------------------------+
| without this patchset | 24464 MB |
+-----------------------+------------------------+
| after patch 1 | 21957 MB | <--------+
+-----------------------+------------------------+ |
| after patch 10 | 6895 MB | |
+-----------------------+------------------------+ |
| after patch 12 | 4367 MB | |
+-----------------------+------------------------+ |
|
The more the number of nodes, the more obvious the effect---+
BTW, there was a recent discussion [2] on the same issue.
[1] https://lore.kernel.org/all/
20210428094949.43579-1-songmuchun@bytedance.com/
[2] https://lore.kernel.org/all/
20210405054848.GA1077931@in.ibm.com/
This series not only optimizes the memory usage of list_lru but also
simplifies the code.
This patch (of 16):
The current scheme of maintaining per-node per-memcg lru lists looks like:
struct list_lru {
struct list_lru_node *node; (for each node)
struct list_lru_memcg *memcg_lrus;
struct list_lru_one *lru[]; (for each memcg)
}
By effectively transposing the two-dimension array of list_lru_one's structures
(per-node per-memcg => per-memcg per-node) it's possible to save some memory
and simplify alloc/dealloc paths. The new scheme looks like:
struct list_lru {
struct list_lru_memcg *mlrus;
struct list_lru_per_memcg *mlru[]; (for each memcg)
struct list_lru_one node[0]; (for each node)
}
Memory savings are coming from not only 'struct rcu_head' but also some
pointer arrays used to store the pointer to 'struct list_lru_one'. The
array is per node and its size is 8 (a pointer) * num_memcgs. So the
total size of the arrays is 8 * num_nodes * memcg_nr_cache_ids. After
this patch, the size becomes 8 * memcg_nr_cache_ids.
Link: https://lkml.kernel.org/r/20220228122126.37293-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20220228122126.37293-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Sebastian Andrzej Siewior [Mon, 28 Feb 2022 23:00:11 +0000 (10:00 +1100)]
mm/memcg: Disable migration instead of preemption in drain_all_stock().
Before the for-each-CPU loop, preemption is disabled so that so that
drain_local_stock() can be invoked directly instead of scheduling a
worker. Ensuring that drain_local_stock() completed on the local CPU is
not correctness problem. It _could_ be that the charging path will be
forced to reclaim memory because cached charges are still waiting for
their draining.
Disabling preemption before invoking drain_local_stock() is problematic
on PREEMPT_RT due to the sleeping locks involved. To ensure that no CPU
migrations happens across for_each_online_cpu() it is enouhg to use
migrate_disable() which disables migration and keeps context preemptible
to a sleeping lock can be acquired.
A race with CPU hotplug is not a problem because pcp data is not going away.
In the worst case we just schedule draining of an empty stock.
Use migrate_disable() instead of get_cpu() around the
for_each_online_cpu() loop.
Link: https://lkml.kernel.org/r/20220226204144.1008339-7-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Sebastian Andrzej Siewior [Mon, 28 Feb 2022 23:00:10 +0000 (10:00 +1100)]
mm/memcg: Protect memcg_stock with a local_lock_t
The members of the per-CPU structure memcg_stock_pcp are protected by
disabling interrupts. This is not working on PREEMPT_RT because it
creates atomic context in which actions are performed which require
preemptible context. One example is obj_cgroup_release().
The IRQ-disable sections can be replaced with local_lock_t which
preserves the explicit disabling of interrupts while keeps the code
preemptible on PREEMPT_RT.
drain_obj_stock() drops a reference on obj_cgroup which leads to an invocat=
ion
of obj_cgroup_release() if it is the last object. This in turn leads to
recursive locking of the local_lock_t. To avoid this, obj_cgroup_release() =
is
invoked outside of the locked section.
obj_cgroup_uncharge_pages() can be invoked with the local_lock_t acquired a=
nd
without it. This will lead later to a recursion in refill_stock(). To
avoid the locking recursion provide obj_cgroup_uncharge_pages_locked()
which uses the locked version of refill_stock().
- Replace disabling interrupts for memcg_stock with a local_lock_t.
- Let drain_obj_stock() return the old struct obj_cgroup which is passed
to obj_cgroup_put() outside of the locked section.
- Provide obj_cgroup_uncharge_pages_locked() which uses the locked
version of refill_stock() to avoid recursive locking in
drain_obj_stock().
Link: https://lkml.kernel.org/r/20220209014709.GA26885@xsang-OptiPlex-9020
Link: https://lkml.kernel.org/r/20220226204144.1008339-6-bigeasy@linutronix.de
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Johannes Weiner [Mon, 28 Feb 2022 23:00:10 +0000 (10:00 +1100)]
mm/memcg: Opencode the inner part of obj_cgroup_uncharge_pages() in drain_obj_stock()
Provide the inner part of refill_stock() as __refill_stock() without
disabling interrupts. This eases the integration of local_lock_t where
recursive locking must be avoided.
Open code obj_cgroup_uncharge_pages() in drain_obj_stock() and use
__refill_stock(). The caller of drain_obj_stock() already disables
interrupts.
[bigeasy: Patch body around Johannes' diff ]
Link: https://lkml.kernel.org/r/20220226204144.1008339-5-bigeasy@linutronix.de
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Sebastian Andrzej Siewior [Mon, 28 Feb 2022 23:00:09 +0000 (10:00 +1100)]
mm/memcg: Protect per-CPU counter by disabling preemption on PREEMPT_RT where needed.
The per-CPU counter are modified with the non-atomic modifier. The
consistency is ensured by disabling interrupts for the update.
On non PREEMPT_RT configuration this works because acquiring a
spinlock_t typed lock with the _irq() suffix disables interrupts. On
PREEMPT_RT configurations the RMW operation can be interrupted.
Another problem is that mem_cgroup_swapout() expects to be invoked with
disabled interrupts because the caller has to acquire a spinlock_t which
is acquired with disabled interrupts. Since spinlock_t never disables
interrupts on PREEMPT_RT the interrupts are never disabled at this
point.
The code is never called from in_irq() context on PREEMPT_RT therefore
disabling preemption during the update is sufficient on PREEMPT_RT.
The sections which explicitly disable interrupts can remain on
PREEMPT_RT because the sections remain short and they don't involve
sleeping locks (memcg_check_events() is doing nothing on PREEMPT_RT).
Disable preemption during update of the per-CPU variables which do not
explicitly disable interrupts.
Link: https://lkml.kernel.org/r/20220226204144.1008339-4-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Sebastian Andrzej Siewior [Mon, 28 Feb 2022 23:00:08 +0000 (10:00 +1100)]
mm/memcg: Disable threshold event handlers on PREEMPT_RT
During the integration of PREEMPT_RT support, the code flow around
memcg_check_events() resulted in `twisted code'. Moving the code around
and avoiding then would then lead to an additional local-irq-save
section within memcg_check_events(). While looking better, it adds a
local-irq-save section to code flow which is usually within an
local-irq-off block on non-PREEMPT_RT configurations.
The threshold event handler is a deprecated memcg v1 feature. Instead of
trying to get it to work under PREEMPT_RT just disable it. There should
be no users on PREEMPT_RT. From that perspective it makes even less
sense to get it to work under PREEMPT_RT while having zero users.
Make memory.soft_limit_in_bytes and cgroup.event_control return
-EOPNOTSUPP on PREEMPT_RT. Make an empty memcg_check_events() and
memcg_write_event_control() which return only -EOPNOTSUPP on PREEMPT_RT.
Document that the two knobs are disabled on PREEMPT_RT.
Link: https://lkml.kernel.org/r/20220226204144.1008339-3-bigeasy@linutronix.de
Suggested-by: Michal Hocko <mhocko@kernel.org>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Michal Hocko [Mon, 28 Feb 2022 23:00:08 +0000 (10:00 +1100)]
mm/memcg: Revert ("mm/memcg: optimize user context object stock access")
The optimisation is based on a micro benchmark where local_irq_save() is
more expensive than a preempt_disable(). There is no evidence that it is
visible in a real-world workload and there are CPUs where the opposite is
true (local_irq_save() is cheaper than preempt_disable()).
Based on micro benchmarks, the optimisation makes sense on PREEMPT_NONE
where preempt_disable() is optimized away. There is no improvement with
PREEMPT_DYNAMIC since the preemption counter is always available.
The optimization makes also the PREEMPT_RT integration more complicated
since most of the assumption are not true on PREEMPT_RT.
Revert the optimisation since it complicates the PREEMPT_RT integration
and the improvement is hardly visible.
[ bigeasy: Patch body around Michal's diff ]
Link: https://lore.kernel.org/all/YgOGkXXCrD%2F1k+p4@dhcp22.suse.cz
Link: https://lkml.kernel.org/r/YdX+INO9gQje6d0S@linutronix.de
Link: https://lkml.kernel.org/r/20220226204144.1008339-2-bigeasy@linutronix.de
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Wei Yang [Mon, 28 Feb 2022 23:00:07 +0000 (10:00 +1100)]
mm/memcg: move generation assignment and comparison together
For each round-trip, we assign generation on first invocation and compare
it on subsequent invocations.
Let's move them together to make it more self-explaining. Also this
reduces a check on prev.
Link: https://lkml.kernel.org/r/20220225003437.12620-4-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Wei Yang [Mon, 28 Feb 2022 23:00:06 +0000 (10:00 +1100)]
mm/memcg: set pos to prev unconditionally
Current code sets pos to prev based on condition (prev && !reclaim), while
we can do this unconditionally.
Since:
* If !reclaim, pos is the same as prev no matter it is NULL or not.
* If reclaim, pos would be set properly from iter->position.
Link: https://lkml.kernel.org/r/20220225003437.12620-3-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Wei Yang [Mon, 28 Feb 2022 23:00:05 +0000 (10:00 +1100)]
mm/memcg: set memcg after css verified and got reference
Patch series "mm/memcg: some cleanup for mem_cgroup_iter()".
This patch (of 3):
Instead of resetting memcg when css is either not verified or has no
reference, we can set it after these are processed.
No functional change, just simplified the code a little.
Link: https://lkml.kernel.org/r/20220225003437.12620-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Randy Dunlap [Mon, 28 Feb 2022 23:00:04 +0000 (10:00 +1100)]
mm/memcontrol: return 1 from cgroup.memory __setup() handler
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment).
The only reason that this particular __setup handler does not pollute
init's environment is that the setup string contains a '.', as in
"cgroup.memory". This causes init/main.c::unknown_boottoption() to
consider it to be an "Unused module parameter" and ignore it. (This is
for parsing of loadable module parameters any time after kernel init.)
Otherwise the string "cgroup.memory=whatever" would be added to init's
environment strings.
Instead of relying on this '.' quirk, just return 1 to indicate that the
boot option has been handled.
Note that there is no warning message if someone enters:
cgroup.memory=anything_invalid
Link: https://lkml.kernel.org/r/20220222005811.10672-1-rdunlap@infradead.org
Fixes:
f7e1cb6ec51b0 ("mm: memcontrol: account socket memory in unified hierarchy memory controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/
64644a2f-4a20-bab3-1e15-
3b2cdd0defe3@omprussia.ru
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shakeel Butt [Mon, 28 Feb 2022 23:00:04 +0000 (10:00 +1100)]
memcg: synchronously enforce memory.high for large overcharges
The high limit is used to throttle the workload without invoking the
oom-killer. Recently we tried to use the high limit to right size our
internal workloads. More specifically dynamically adjusting the limits of
the workload without letting the workload get oom-killed. However due to
the limitation of the implementation of high limit enforcement, we
observed the mechanism fails for some real workloads.
The high limit is enforced on return-to-userspace i.e. the kernel let the
usage goes over the limit and when the execution returns to userspace, the
high reclaim is triggered and the process can get throttled as well.
However this mechanism fails for workloads which do large allocations in a
single kernel entry e.g. applications that mlock() a large chunk of
memory in a single syscall. Such applications bypass the high limit and
can trigger the oom-killer.
To make high limit enforcement more robust, this patch makes the limit
enforcement synchronous only if the accumulated overcharge becomes larger
than MEMCG_CHARGE_BATCH. So, most of the allocations would still be
throttled on the return-to-userspace path but only the extreme allocations
which accumulates large amount of overcharge without returning to the
userspace will be throttled synchronously. The value MEMCG_CHARGE_BATCH
is a bit arbitrary but most of other places in the memcg codebase uses
this constant therefore for now uses the same one.
Link: https://lkml.kernel.org/r/20220211064917.2028469-5-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shakeel Butt [Mon, 28 Feb 2022 23:00:03 +0000 (10:00 +1100)]
selftests: memcg: test high limit for single entry allocation
Test the enforcement of memory.high limit for large amount of memory
allocation within a single kernel entry. There are valid use-cases where
the application can trigger large amount of memory allocation within a
single syscall e.g. mlock() or mmap(MAP_POPULATE). Make sure memory.high
limit enforcement works for such use-cases.
Link: https://lkml.kernel.org/r/20220211064917.2028469-4-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shakeel Butt [Mon, 28 Feb 2022 23:00:02 +0000 (10:00 +1100)]
memcg: unify force charging conditions
Currently the kernel force charges the allocations which have __GFP_HIGH
flag without triggering the memory reclaim. __GFP_HIGH indicates that the
caller is high priority and since commit
869712fd3de5 ("mm: memcontrol:
fix network errors from failing __GFP_ATOMIC charges") the kernel lets
such allocations do force charging. Please note that __GFP_ATOMIC has
been replaced by __GFP_HIGH.
__GFP_HIGH does not tell if the caller can block or can trigger reclaim.
There are separate checks to determine that. So, there is no need to skip
reclaiming for __GFP_HIGH allocations. So, handle __GFP_HIGH together
with __GFP_NOFAIL which also does force charging.
Please note that this is a noop change as there are no __GFP_HIGH
allocators in the kernel which also have __GFP_ACCOUNT (or SLAB_ACCOUNT)
and does not allow reclaim for now.
Link: https://lkml.kernel.org/r/20220211064917.2028469-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shakeel Butt [Mon, 28 Feb 2022 23:00:01 +0000 (10:00 +1100)]
memcg: refactor mem_cgroup_oom
Patch series "memcg: robust enforcement of memory.high", v2.
Due to the semantics of memory.high enforcement i.e. throttle the
workload without oom-kill, we are trying to use it for right sizing the
workloads in our production environment. However we observed the
mechanism fails for some specific applications which does big chunck of
allocations in a single syscall. The reason behind this failure is due to
the limitation of the memory.high enforcement's current implementation.
This patch series solves this issue by enforcing the memory.high
synchronously if the current process has accumulated a large amount of
high overcharge.
This patch (of 4):
The function mem_cgroup_oom returns enum which has four possible values
but the caller does not care about such values and only cares if the
return value is OOM_SUCCESS or not. So, remove the enum altogether and
make mem_cgroup_oom returns a simple bool.
Link: https://lkml.kernel.org/r/20220211064917.2028469-1-shakeelb@google.com
Link: https://lkml.kernel.org/r/20220211064917.2028469-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Wei Yang [Mon, 28 Feb 2022 23:00:00 +0000 (10:00 +1100)]
mm/memcg: retrieve parent memcg from css.parent
The parent we get from page_counter is correct, while this is two
different hierarchy.
Let's retrieve the parent memcg from css.parent just like parent_cs(),
blkcg_parent(), etc.
Link: https://lkml.kernel.org/r/20220201004643.8391-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Wei Yang [Mon, 28 Feb 2022 22:59:59 +0000 (09:59 +1100)]
mm/memcg: mem_cgroup_per_node is already set to 0 on allocation
kzalloc_node() would set data to 0, so it's not necessary to set it
again.
Link: https://lkml.kernel.org/r/20220201004643.8391-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Yosry Ahmed [Mon, 28 Feb 2022 22:59:59 +0000 (09:59 +1100)]
memcg: add per-memcg total kernel memory stat
Currently memcg stats show several types of kernel memory: kernel stack,
page tables, sock, vmalloc, and slab. However, there are other
allocations with __GFP_ACCOUNT (or supersets such as GFP_KERNEL_ACCOUNT)
that are not accounted in any of those stats, a few examples are:
- various kvm allocations (e.g. allocated pages to create vcpus)
- io_uring
- tmp_page in pipes during pipe_write()
- bpf ringbuffers
- unix sockets
Keeping track of the total kernel memory is essential for the ease of
migration from cgroup v1 to v2 as there are large discrepancies between
v1's kmem.usage_in_bytes and the sum of the available kernel memory stats
in v2. Adding separate memcg stats for all __GFP_ACCOUNT kernel
allocations is an impractical maintenance burden as there a lot of those
all over the kernel code, with more use cases likely to show up in the
future.
Therefore, add a "kernel" memcg stat that is analogous to kmem page
counter, with added benefits such as using rstat infrastructure which
aggregates stats more efficiently. Additionally, this provides a lighter
alternative in case the legacy kmem is deprecated in the future
[yosryahmed@google.com: v2]
Link: https://lkml.kernel.org/r/20220203193856.972500-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20220201200823.3283171-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shakeel Butt [Mon, 28 Feb 2022 22:59:58 +0000 (09:59 +1100)]
memcg: replace in_interrupt() with !in_task()
Replace the deprecated in_interrupt() with !in_task() because
in_interrupt() returns true for BH disabled even if the call happens in
the task context. in_task() is the right interface to differentiate task
context from NMI, hard IRQ and softirq contexts.
Link: https://lkml.kernel.org/r/20220127162636.3461256-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Hugh Dickins [Mon, 28 Feb 2022 22:59:57 +0000 (09:59 +1100)]
tmpfs: three tweaks to creation time patch
Thank you to Xavier Roche for his tmpfs file creation time patch. Please
apply these 3 tweaks on top (and fold in when sending to Linus):
1. Move vfs_inode back to being last element of shmem_inode_info.
2. Remove unnecessary parentheses from condition in shmem_getattr().
3. Using shmem_getattr() on other file types than regular requires that
shmem_is_huge() check type, to stop incorrect HPAGE_PMD_SIZE blksize.
Link: https://lkml.kernel.org/r/b954973a-b8d1-cab8-63bd-6ea8063de3@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Xavier Roche <xavier.roche@algolia.com>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Xavier Roche [Mon, 28 Feb 2022 22:59:57 +0000 (09:59 +1100)]
tmpfs: support for file creation time
Various filesystems (including ext4) now support file creation time. This
patch adds such support for tmpfs-based filesystems.
Link: https://lkml.kernel.org/r/20220211213628.GA1919658@xavier-xps
Signed-off-by: Xavier Roche <xavier.roche@algolia.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
John Hubbard [Mon, 28 Feb 2022 22:59:56 +0000 (09:59 +1100)]
mm/gup: remove unused get_user_pages_locked()
Now that the last caller of get_user_pages_locked() is gone, remove it.
Link: https://lkml.kernel.org/r/20220204020010.68930-6-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
John Hubbard [Mon, 28 Feb 2022 22:59:55 +0000 (09:59 +1100)]
mm: change lookup_node() to use get_user_pages_fast()
The purpose of calling get_user_pages_locked() from lookup_node() was to
allow for unlocking the mmap_lock when reading a page from the disk during
a page fault (hidden behind VM_FAULT_RETRY). The idea was to reduce
contention on the heavily-used mmap_lock. (Thanks to Jan Kara for clearly
pointing that out, and in fact I've used some of his wording here.)
However, it is unlikely for lookup_node() to take a page fault. With that
in mind, change over to calling get_user_pages_fast(). This simplifies
the code, runs a little faster in the expected case, and allows removing
get_user_pages_locked() entirely, in a subsequent patch.
Link: https://lkml.kernel.org/r/20220204020010.68930-5-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
John Hubbard [Mon, 28 Feb 2022 22:59:54 +0000 (09:59 +1100)]
mm/gup: remove unused pin_user_pages_locked()
This routine was used for a short while, but then the calling code was
refactored and the only caller was removed.
Link: https://lkml.kernel.org/r/20220204020010.68930-4-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
John Hubbard [Mon, 28 Feb 2022 22:59:53 +0000 (09:59 +1100)]
mm/gup: follow_pfn_pte(): -EEXIST cleanup
Remove a quirky special case from follow_pfn_pte(), and adjust its callers
to match. Caller changes include:
__get_user_pages(): Regardless of any FOLL_* flags, get_user_pages() and
its variants should handle PFN-only entries by stopping early, if the
caller expected **pages to be filled in. This makes for a more reliable
API, as compared to the previous approach of skipping over such entries
(and thus leaving them silently unwritten).
move_pages(): squash the -EEXIST error return from follow_page() into
-EFAULT, because -EFAULT is listed in the man page, whereas -EEXIST is
not.
Link: https://lkml.kernel.org/r/20220204020010.68930-3-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Peter Xu <peterx@redhat.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Peter Xu [Mon, 28 Feb 2022 22:59:52 +0000 (09:59 +1100)]
mm: fix invalid page pointer returned with FOLL_PIN gups
Patch series "mm/gup: some cleanups", v5.
This patch (of 5):
Alex reported invalid page pointer returned with pin_user_pages_remote()
from vfio after upstream commit
4b6c33b32296 ("vfio/type1: Prepare for
batched pinning with struct vfio_batch").
It turns out that it's not the fault of the vfio commit; however after
vfio switches to a full page buffer to store the page pointers it starts
to expose the problem easier.
The problem is for VM_PFNMAP vmas we should normally fail with an -EFAULT
then vfio will carry on to handle the MMIO regions. However when the bug
triggered, follow_page_mask() returned -EEXIST for such a page, which will
jump over the current page, leaving that entry in **pages untouched.
However the caller is not aware of it, hence the caller will reference the
page as usual even if the pointer data can be anything.
We had that -EEXIST logic since commit
1027e4436b6a ("mm: make GUP handle
pfn mapping unless FOLL_GET is requested") which seems very reasonable.
It could be that when we reworked GUP with FOLL_PIN we could have
overlooked that special path in commit
3faa52c03f44 ("mm/gup: track
FOLL_PIN pages"), even if that commit rightfully touched up
follow_devmap_pud() on checking FOLL_PIN when it needs to return an
-EEXIST.
Attaching the Fixes to the FOLL_PIN rework commit, as it happened later than
1027e4436b6a.
[jhubbard@nvidia.com: added some tags, removed a reference to an out of tree module.]
Link: https://lkml.kernel.org/r/20220207062213.235127-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20220204020010.68930-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20220204020010.68930-2-jhubbard@nvidia.com
Fixes:
3faa52c03f44 ("mm/gup: track FOLL_PIN pages")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Debugged-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Miaohe Lin [Mon, 28 Feb 2022 22:59:51 +0000 (09:59 +1100)]
mm/writeback: minor clean up for highmem_dirtyable_memory
Since commit
a804552b9a15 ("mm/page-writeback.c: fix dirty_balance_reserve
subtraction from dirtyable memory"), local variable x can not be negative.
And it can not overflow when it is the total number of dirtyable highmem
pages. Thus remove the unneeded comment and overflow check.
Link: https://lkml.kernel.org/r/20220224115416.46089-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Miaohe Lin [Mon, 28 Feb 2022 22:59:50 +0000 (09:59 +1100)]
filemap: remove find_get_pages()
It's unused now. Remove it and clean up the relevant comment.
Link: https://lkml.kernel.org/r/20220208134149.47299-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Christoph Hellwig [Mon, 28 Feb 2022 22:59:49 +0000 (09:59 +1100)]
mm: unexport page_init_poison
page_init_poison is only used in core MM code, so unexport it.
Link: https://lkml.kernel.org/r/20220207063446.1833404-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Yixuan Cao [Mon, 28 Feb 2022 22:59:48 +0000 (09:59 +1100)]
tools/vm/page_owner_sort.c: fix the instructions for use
I noticed a discrepancy between the usage method and the code logic.
If we enable the -f option, it should be "Filter out the information of
blocks whose memory has been released".
Link: https://lkml.kernel.org/r/20220219143106.2805-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Yixuan Cao [Mon, 28 Feb 2022 22:59:48 +0000 (09:59 +1100)]
mm/page_owner.c: record tgid
In a single-threaded process, the pid in kernel task_struct is the same as
the tgid, which can mark the process of page allocation. But in a
multithreaded process, only the task_struct of the thread leader has the
same pid as tgid, and the pids of other threads are different from tgid.
Therefore, tgid is recorded to provide effective information for debugging
and data statistics of multithreaded programs.
This can also be achieved by observing the task name (executable file
name) for a specific process. However, when the same program is started
multiple times, the task name is the same and the tgid is different.
Therefore, in the debugging of multi-threaded programs, combined with the
task name and tgid, more accurate runtime information of a certain run of
the program can be obtained.
Link: https://lkml.kernel.org/r/20220219180450.2399-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Waiman Long <longman@redhat.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Waiman Long [Mon, 28 Feb 2022 22:59:47 +0000 (09:59 +1100)]
mm/page_owner: record task command name
The page_owner information currently includes the pid of the calling task.
That is useful as long as the task is still running. Otherwise, the
number is meaningless. To have more information about the allocating
tasks that had exited by the time the page_owner information is retrieved,
we need to store the command name of the task.
Add a new comm field into page_owner structure to store the command name
and display it when the page_owner information is retrieved.
Link: https://lkml.kernel.org/r/20220202203036.744010-5-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Waiman Long [Mon, 28 Feb 2022 22:59:46 +0000 (09:59 +1100)]
mm/page_owner: print memcg information
It was found that a number of offline memcgs were not freed because they
were pinned by some charged pages that were present. Even "echo 1 >
/proc/sys/vm/drop_caches" wasn't able to free those pages. These offline
but not freed memcgs tend to increase in number over time with the side
effect that percpu memory consumption as shown in /proc/meminfo also
increases over time.
In order to find out more information about those pages that pin offline
memcgs, the page_owner feature is extended to print memory cgroup
information especially whether the cgroup is offline or not. RCU read
lock is taken when memcg is being accessed to make sure that it won't be
freed.
Link: https://lkml.kernel.org/r/20220202203036.744010-4-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Waiman Long [Mon, 28 Feb 2022 22:59:45 +0000 (09:59 +1100)]
mm/page_owner: use scnprintf() to avoid excessive buffer overrun check
The snprintf() function can return a length greater than the given input
size. That will require a check for buffer overrun after each invocation
of snprintf(). scnprintf(), on the other hand, will never return a
greater length. By using scnprintf() in selected places, we can avoid
some buffer overrun checks except after stack_depot_snprint() and after
the last snprintf().
Link: https://lkml.kernel.org/r/20220202203036.744010-3-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Waiman Long [Mon, 28 Feb 2022 22:59:43 +0000 (09:59 +1100)]
lib/vsprintf: avoid redundant work with 0 size
Patch series "mm/page_owner: Extend page_owner to show memcg information", v4.
While debugging the constant increase in percpu memory consumption on a
system that spawned large number of containers, it was found that a lot of
offline mem_cgroup structures remained in place without being freed.
Further investigation indicated that those mem_cgroup structures were
pinned by some pages.
In order to find out what those pages are, the existing page_owner
debugging tool is extended to show memory cgroup information and whether
those memcgs are offline or not. With the enhanced page_owner tool, the
following is a typical page that pinned the mem_cgroup structure in my
test case:
Page allocated via order 0, mask 0x1100cca(GFP_HIGHUSER_MOVABLE), pid 162970 (podman), ts
1097761405537 ns, free_ts
1097760838089 ns
PFN
1925700 type Movable Block 3761 type Movable Flags 0x17ffffc00c001c(uptodate|dirty|lru|reclaim|swapbacked|node=0|zone=2|lastcpupid=0x1fffff)
prep_new_page+0xac/0xe0
get_page_from_freelist+0x1327/0x14d0
__alloc_pages+0x191/0x340
alloc_pages_vma+0x84/0x250
shmem_alloc_page+0x3f/0x90
shmem_alloc_and_acct_page+0x76/0x1c0
shmem_getpage_gfp+0x281/0x940
shmem_write_begin+0x36/0xe0
generic_perform_write+0xed/0x1d0
__generic_file_write_iter+0xdc/0x1b0
generic_file_write_iter+0x5d/0xb0
new_sync_write+0x11f/0x1b0
vfs_write+0x1ba/0x2a0
ksys_write+0x59/0xd0
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Charged to offline memcg libpod-conmon-
15e4f9c758422306b73b2dd99f9d50a5ea53cbb16b4a13a2c2308a4253cc0ec8.
So the page was not freed because it was part of a shmem segment. That is
useful information that can help users to diagnose similar problems.
With cgroup v1, /proc/cgroups can be read to find out the total number of
memory cgroups (online + offline). With cgroup v2, the cgroup.stat of the
root cgroup can be read to find the number of dying cgroups (most likely
pinned by dying memcgs).
The page_owner feature is not supposed to be enabled for production system
due to its memory overhead. However, if it is suspected that dying memcgs
are increasing over time, a test environment with page_owner enabled can
then be set up with appropriate workload for further analysis on what may
be causing the increasing number of dying memcgs.
This patch (of 4):
For *scnprintf(), vsnprintf() is always called even if the input size is
0. That is a waste of time, so just return 0 in this case.
Note that vsnprintf() will never return -1 to indicate an error. So
skipping the call to vsnprintf() when size is 0 will have no functional
impact at all.
Link: https://lkml.kernel.org/r/20220202203036.744010-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20220202203036.744010-2-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Yixuan Cao [Mon, 28 Feb 2022 22:59:42 +0000 (09:59 +1100)]
Documentation/vm/page_owner.rst: fix comments
There are some comments that need to be fixed.
Thanks for Shuah Khan's constructive suggestions. The comments have been
fixed as follows.
a. So, if you'd like to use it, you need
to add "page_owner=on" into your boot cmdline.
Here, "into" has been replaced with "to".
b. ...page owner is disabled in runtime due to no
enabling, boot option, runtime overhead is marginal.
Here, "no" has been replaced with "not".
Link: https://lkml.kernel.org/r/20220223134104.2663-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shuah Khan [Mon, 28 Feb 2022 22:59:42 +0000 (09:59 +1100)]
Documentation/vm/page_owner.rst: fix unexpected indentation warns
Fix Unexpected indentation warns in page_owner:
Documentation/vm/page_owner.rst:92: WARNING: Unexpected indentation.
Documentation/vm/page_owner.rst:96: WARNING: Unexpected indentation.
Documentation/vm/page_owner.rst:107: WARNING: Unexpected indentation.
Link: https://lkml.kernel.org/r/20211215001929.47866-1-skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Andrew Morton [Mon, 28 Feb 2022 22:59:40 +0000 (09:59 +1100)]
documentation-vm-page_ownerrst-update-the-documentation-fix
small grammatical tweaks
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shenghong Han [Mon, 28 Feb 2022 22:59:39 +0000 (09:59 +1100)]
Documentation/vm/page_owner.rst: update the documentation
Update the documentation of ``page_owner``.
Link: https://lkml.kernel.org/r/20211214134736.2569-1-hanshenghong2019@email.szu.edu.cn
Signed-off-by: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Yixuan Cao [Mon, 28 Feb 2022 22:59:38 +0000 (09:59 +1100)]
tools/vm/page_owner_sort.c: delete invalid duplicate code
I noticed that there is two invalid lines of duplicate code. It's better
to delete it.
Link: https://lkml.kernel.org/r/20211213095743.3630-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shenghong Han [Mon, 28 Feb 2022 22:59:37 +0000 (09:59 +1100)]
tools/vm/page_owner_sort.c: two trivial fixes
1) There is an unused variable. It's better to delete it.
2) One case is missing in the usage().
Link: https://lkml.kernel.org/r/20211213164518.2461-1-hanshenghong2019@email.szu.edu.cn
Signed-off-by: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
projects / linux-2.6-block.git / log