git.kernel.dk Git - linux-2.6-block.git/log

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Cross-merge bpf fixes after downstream PR including
important fixes (from bpf-next point of view):
commit 41c24102af7b ("selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp")
commit fdad456cbcca ("bpf: Fix updating attached freplace prog in prog_array map")

No conflicts.

Adjacent changes in:
include/linux/bpf_verifier.h
kernel/bpf/verifier.c
tools/testing/selftests/bpf/Makefile

Link: https://lore.kernel.org/bpf/20240813234307.82773-1-alexei.starovoitov@gmail.com/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge branch 'support-bpf_fastcall-patterns-for-calls-to-kfuncs'

Eduard Zingerman says:

====================
support bpf_fastcall patterns for calls to kfuncs

As an extension of [1], allow bpf_fastcall patterns for kfuncs:
- pattern rules are the same as for helpers;
- spill/fill removal is allowed only for kfuncs listed in the
  is_fastcall_kfunc_call (under assumption that such kfuncs would
  always be members of special_kfunc_list).

Allow bpf_fastcall rewrite for bpf_cast_to_kern_ctx() and
bpf_rdonly_cast() in order to conjure selftests for this feature.

After this patch-set verifier would rewrite the program below:

  r2 = 1
  *(u64 *)(r10 - 32) = r2
  call %[bpf_cast_to_kern_ctx]
  r2 = *(u64 *)(r10 - 32)
  r0 = r2;"

As follows:

  r2 = 1   /* spill/fill at r10[-32] is removed */
  r0 = r1  /* replacement for bpf_cast_to_kern_ctx() */
  r0 = r2
  exit

Also, attribute used by LLVM implementation of the feature had been
changed from no_caller_saved_registers to bpf_fastcall (see [2]).
This patch-set replaces references to nocsr by references to
bpf_fastcall to keep LLVM and Kernel parts in sync.

[1] no_caller_saved_registers attribute for helper calls
    https://lore.kernel.org/bpf/20240722233844.1406874-1-eddyz87@gmail.com/
[2] [BPF] introduce __attribute__((bpf_fastcall))
    https://github.com/llvm/llvm-project/pull/105417

Changes v2->v3:
- added a patch fixing arch_mask handling in test_loader,
  otherwise newly added tests for the feature were skipped
  (a fix for regression introduced by a recent commit);
- fixed warning regarding unused 'params' variable;
- applied stylistical fixes suggested by Yonghong;
- added acks from Yonghong;

Changes v1->v2:
- added two patches replacing all mentions of nocsr by bpf_fastcall
  (suggested by Andrii);
- removed KF_NOCSR flag (suggested by Yonghong).

v1: https://lore.kernel.org/bpf/20240812234356.2089263-1-eddyz87@gmail.com/
v2: https://lore.kernel.org/bpf/20240817015140.1039351-1-eddyz87@gmail.com/
====================

Link: https://lore.kernel.org/r/20240822084112.3257995-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: check if bpf_fastcall is recognized for kfuncs

Use kfunc_bpf_cast_to_kern_ctx() and kfunc_bpf_rdonly_cast() to verify
that bpf_fastcall pattern is recognized for kfunc calls.

Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: by default use arch mask allowing all archs

If test case does not specify architecture via __arch_* macro consider
that it should be run for all architectures.

Fixes: 7d743e4c759c ("selftests/bpf: __jited test tag to check disassembly after jit")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: allow bpf_fastcall for bpf_cast_to_kern_ctx and bpf_rdonly_cast

do_misc_fixups() relaces bpf_cast_to_kern_ctx() and bpf_rdonly_cast()
by a single instruction "r0 = r1". This follows bpf_fastcall contract.
This commit allows bpf_fastcall pattern rewrite for these two
functions in order to use them in bpf_fastcall selftests.

Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: support bpf_fastcall patterns for kfuncs

Recognize bpf_fastcall patterns around kfunc calls.
For example, suppose bpf_cast_to_kern_ctx() follows bpf_fastcall
contract (which it does), in such a case allow verifier to rewrite BPF
program below:

  r2 = 1;
  *(u64 *)(r10 - 32) = r2;
  call %[bpf_cast_to_kern_ctx];
  r2 = *(u64 *)(r10 - 32);
  r0 = r2;

By removing the spill/fill pair:

  r2 = 1;
  call %[bpf_cast_to_kern_ctx];
  r0 = r2;

Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: rename nocsr -> bpf_fastcall in selftests

Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and selftests parts in sync.

[1] https://github.com/llvm/llvm-project/pull/105417

Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: rename nocsr -> bpf_fastcall in verifier

Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and Kernel parts in sync.

[1] https://github.com/llvm/llvm-project/pull/105417

Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Fix percpu address space issues

In arraymap.c:

In bpf_array_map_seq_start() and bpf_array_map_seq_next()
cast return values from the __percpu address space to
the generic address space via uintptr_t [1].

Correct the declaration of pptr pointer in __bpf_array_map_seq_show()
to void __percpu * and cast the value from the generic address
space to the __percpu address space via uintptr_t [1].

In hashtab.c:

Assign the return value from bpf_mem_cache_alloc() to void pointer
and cast the value to void __percpu ** (void pointer to percpu void
pointer) before dereferencing.

In memalloc.c:

Explicitly declare __percpu variables.

Cast obj to void __percpu **.

In helpers.c:

Cast ptr in BPF_CALL_1 and BPF_CALL_2 from generic address space
to __percpu address space via const uintptr_t [1].

Found by GCC's named address space checks.

There were no changes in the resulting object files.

[1] https://sparse.docs.kernel.org/en/latest/annotations.html#address-space-name

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240811161414.56744-1-ubizjak@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge branch 'bpf-fix-null-pointer-access-for-malformed-bpf_core_type_id_local-relos'

Eduard Zingerman says:

====================
bpf: fix null pointer access for malformed BPF_CORE_TYPE_ID_LOCAL relos

Liu RuiTong reported an in-kernel null pointer derefence when
processing BPF_CORE_TYPE_ID_LOCAL relocations referencing non-existing
BTF types. Fix this by adding proper id checks.

Changes v2->v3:
- selftest update suggested by Andrii:
  avoid memset(0) for log buffer and do memset(0) for bpf_attr.

Changes v1->v2:
- moved check from bpf_core_calc_relo_insn() to bpf_core_apply()
  now both in kernel and in libbpf relocation type id is guaranteed
  to exist when bpf_core_calc_relo_insn() is called;
- added a test case.

v1: https://lore.kernel.org/bpf/20240821164620.1056362-1-eddyz87@gmail.com/
v2: https://lore.kernel.org/bpf/20240822001837.2715909-1-eddyz87@gmail.com/
====================

Link: https://lore.kernel.org/r/20240822080124.2995724-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: test for malformed BPF_CORE_TYPE_ID_LOCAL relocation

Check that verifier rejects BPF program containing relocation
pointing to non-existent BTF type.

To force relocation resolution on kernel side test case uses
bpf_attr->core_relos field. This field is not exposed by libbpf,
so directly do BPF system call in the test.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: correctly handle malformed BPF_CORE_TYPE_ID_LOCAL relos

In case of malformed relocation record of kind BPF_CORE_TYPE_ID_LOCAL
referencing a non-existing BTF type, function bpf_core_calc_relo_insn
would cause a null pointer deference.

Fix this by adding a proper check upper in call stack, as malformed
relocation records could be passed from user space.

Simplest reproducer is a program:

    r0 = 0
    exit

With a single relocation record:

    .insn_off = 0,          /* patch first instruction */
    .type_id = 100500,      /* this type id does not exist */
    .access_str_off = 6,    /* offset of string "0" */
    .kind = BPF_CORE_TYPE_ID_LOCAL,

See the link for original reproducer or next commit for a test case.

Fixes: 74753e1462e7 ("libbpf: Replace btf__type_by_id() with btf_type_by_id().")
Reported-by: Liu RuiTong <cnitlrt@gmail.com>
Closes: https://lore.kernel.org/bpf/CAK55_s6do7C+DVwbwY_7nKfUz0YLDoiA1v6X3Y9+p0sWzipFSA@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Use kmemdup_array instead of kmemdup for multiple allocation

Let the kmemdup_array() take care about multiplication and possible
overflows.

Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240821073709.4067177-1-yujiaoliang@vivo.com

Merge tag 'platform-drivers-x86-v6.11-4' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:

- ISST: Fix an error-handling corner case

- platform/surface: aggregator: Minor corner case fix and new HW
   support

* tag 'platform-drivers-x86-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: ISST: Fix return value on last invalid resource
  platform/surface: aggregator: Fix warning when controller is destroyed in probe
  platform/surface: aggregator_registry: Add support for Surface Laptop 6
  platform/surface: aggregator_registry: Add fan and thermal sensor support for Surface Laptop 5
  platform/surface: aggregator_registry: Add support for Surface Laptop Studio 2
  platform/surface: aggregator_registry: Add support for Surface Laptop Go 3
  platform/surface: aggregator_registry: Add Support for Surface Pro 10
  platform/x86: asus-wmi: Add quirk for ROG Ally X

Merge tag 'erofs-for-6.11-rc5-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:
"As I mentioned in the merge window pull request, there is a regression
  which could cause system hang due to page migration. The corresponding
  fix landed upstream through MM tree last week (commit 2e6506e1c4ee:
  "mm/migrate: fix deadlock in migrate_pages_batch() on large folios"),
  therefore large folios can be safely allowed for compressed inodes and
  stress tests have been running on my fleet for over 20 days without
  any regression. Users have explicitly requested this for months, so
  let's allow large folios for EROFS full cases now for wider testing.

  Additionally, there is a fix which addresses invalid memory accesses
  on a failure path triggered by fault injection and two minor cleanups
  to simplify the codebase.

  Summary:

   - Allow large folios on compressed inodes

   - Fix invalid memory accesses if z_erofs_gbuf_growsize() partially
     fails

   - Two minor cleanups"

* tag 'erofs-for-6.11-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails
  erofs: allow large folios for compressed files
  erofs: get rid of check_layout_compatibility()
  erofs: simplify readdir operation

Merge branch '__jited-test-tag-to-check-disassembly-after-jit'

Eduard Zingerman says:

====================
__jited test tag to check disassembly after jit

Some of the logic in the BPF jits might be non-trivial.
It might be useful to allow testing this logic by comparing
generated native code with expected code template.
This patch set adds a macro __jited() that could be used for
test_loader based tests in a following manner:

    SEC("tp")
    __arch_x86_64
    __jited("   endbr64")
    __jited("   nopl    (%rax,%rax)")
    __jited("   xorq    %rax, %rax")
    ...
    __naked void some_test(void) { ... }

Also add a test for jit code generated for tail calls handling to
demonstrate the feature.

The feature uses LLVM libraries to do the disassembly.
At selftests compilation time Makefile detects if these libraries are
available. When libraries are not available tests using __jit_x86()
are skipped.
Current CI environment does not include llvm development libraries,
but changes to add these are trivial.

This was previously discussed here:
https://lore.kernel.org/bpf/20240718205158.3651529-1-yonghong.song@linux.dev/

Patch-set includes a few auxiliary steps:
- patches #2 and #3 fix a few bugs in test_loader behaviour;
- patch #4 replaces __regex macro with ability to specify regular
  expressions in __msg and __xlated using "{{" "}}" escapes;
- patch #8 updates __xlated to match disassembly lines consequently,
  same way as __jited does.

Changes v2->v3:
- changed macro name from __jit_x86 to __jited with __arch_* to
  specify disassembly arch (Yonghong);
- __jited matches disassembly lines consequently with "..."
  allowing to skip some number of lines (Andrii);
- __xlated matches disassembly lines consequently, same as __jited;
- "{{...}}" regex brackets instead of __regex macro;
- bug fixes for old commits.

Changes v1->v2:
- stylistic changes suggested by Yonghong;
- fix for -Wformat-truncation related warning when compiled with
  llvm15 (Yonghong).

v1: https://lore.kernel.org/bpf/20240809010518.1137758-1-eddyz87@gmail.com/
v2: https://lore.kernel.org/bpf/20240815205449.242556-1-eddyz87@gmail.com/
====================

Link: https://lore.kernel.org/r/20240820102357.3372779-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: validate __xlated same way as __jited

Both __xlated and __jited work with disassembly.
It is logical to have both work in a similar manner.

This commit updates __xlated macro handling in test_loader.c by making
it expect matches on sequential lines, same way as __jited operates.
For example:

    __xlated("1: *(u64 *)(r10 -16) = r1")      ;; matched on line N
    __xlated("3: r0 = &(void __percpu *)(r0)") ;; matched on line N+1

Also:

    __xlated("1: *(u64 *)(r10 -16) = r1")      ;; matched on line N
    __xlated("...")                            ;; not matched
    __xlated("3: r0 = &(void __percpu *)(r0)") ;; mantched on any
                                               ;; line >= N

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: validate jit behaviour for tail calls

A program calling sub-program which does a tail call.
The idea is to verify instructions generated by jit for tail calls:
- in program and sub-program prologues;
- for subprogram call instruction;
- for tail call itself.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: __jited test tag to check disassembly after jit

Allow to verify jit behaviour by writing tests as below:

    SEC("tp")
    __arch_x86_64
    __jited("   endbr64")
    __jited("   nopl    (%rax,%rax)")
    __jited("   xorq    %rax, %rax")
    ...
    __naked void some_test(void)
    {
        asm volatile (... ::: __clobber_all);
    }

Allow regular expressions in patterns, same way as in __msg.
By default assume that each __jited pattern has to be matched on the
next consecutive line of the disassembly, e.g.:

    __jited("   endbr64")             # matched on line N
    __jited("   nopl    (%rax,%rax)") # matched on line N+1

If match occurs on a wrong line an error is reported.
To override this behaviour use __jited("..."), e.g.:

    __jited("   endbr64")             # matched on line N
    __jited("...")                    # not matched
    __jited("   nopl    (%rax,%rax)") # matched on any line >= N

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: utility function to get program disassembly after jit

This commit adds a utility function to get disassembled text for jited
representation of a BPF program designated by file descriptor.
Function prototype looks as follows:

    int get_jited_program_text(int fd, char *text, size_t text_sz)

Where 'fd' is a file descriptor for the program, 'text' and 'text_sz'
refer to a destination buffer for disassembled text.
Output format looks as follows:

    18: 77 06                                ja L0
    1a: 50                                   pushq %rax
    1b: 48 89 e0                             movq %rsp, %rax
    1e: eb 01                                jmp L1
    20: 50                                  L0: pushq %rax
    21: 50                                  L1: pushq %rax
     ^  ^^^^^^^^                             ^  ^^^^^^^^^^^^^^^^^^
     |  binary insn                          |  textual insn
     |  representation                       |  representation
     |                                       |
    instruction offset              inferred local label name

The code and makefile changes are inspired by jit_disasm.c from bpftool.
Use llvm libraries to disassemble BPF program instead of libbfd to avoid
issues with disassembly output stability pointed out in [1].

Selftests makefile uses Makefile.feature to detect if LLVM libraries
are available. If that is not the case selftests build proceeds but
the function returns -EOPNOTSUPP at runtime.

[1] commit eb9d1acf634b ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")

Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: replace __regex macro with "{{...}}" patterns

Upcoming changes require a notation to specify regular expression
matches for regular verifier log messages, disassembly of BPF
instructions, disassembly of jited instructions.

Neither basic nor extended POSIX regular expressions w/o additional
escaping are good for this role because of wide use of special
characters in disassembly, for example:

    movq -0x10(%rbp), %rax  ;; () are special characters
    cmpq $0x21, %rax        ;; $ is a special character

    *(u64 *)(r10 -16) = r1  ;; * and () are special characters

This commit borrows syntax from LLVM's FileCheck utility.
It replaces __regex macro with ability to embed regular expressions
in __msg patters using "{{" "}}" pairs for escaping.
Syntax for __msg patterns:

    pattern := (<verbatim text> | regex)*
    regex := "{{" <posix extended regular expression> "}}"

For example, pattern "foo{{[0-9]+}}" matches strings like
"foo0", "foo007", etc.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: fix to avoid __msg tag de-duplication by clang

__msg, __regex and __xlated tags are based on
__attribute__((btf_decl_tag("..."))) annotations.

Clang de-duplicates such annotations, e.g. the following
two sequences of tags are identical in final BTF:

    /* seq A */            /* seq B */
    __tag("foo")           __tag("foo")
    __tag("bar")           __tag("bar")
    __tag("foo")

Fix this by adding a unique suffix for each tag using __COUNTER__
pre-processor macro. E.g. here is a new definition for __msg:

    #define __msg(msg) \
      __attribute__((btf_decl_tag("comment:test_expect_msg=" XSTR(__COUNTER__) "=" msg)))

Using this definition the "seq A" from example above is translated to
BTF as follows:

    [..] DECL_TAG 'comment:test_expect_msg=0=foo' type_id=X component_idx=-1
    [..] DECL_TAG 'comment:test_expect_msg=1=bar' type_id=X component_idx=-1
    [..] DECL_TAG 'comment:test_expect_msg=2=foo' type_id=X component_idx=-1

Surprisingly, this bug affects a single existing test:
verifier_spill_fill/old_stack_misc_vs_cur_ctx_ptr,
where sequence of identical messages was expected in the log.

Fixes: 537c3f66eac1 ("selftests/bpf: add generic BPF program tester-loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: correctly move 'log' upon successful match

Suppose log="foo bar buz" and msg->substr="bar".
In such case current match processing logic would update 'log' as
follows: log += strlen(msg->substr); -> log += 3 -> log=" bar".
However, the intent behind the 'log' update is to make it point after
the successful match, e.g. to make log=" buz" in the example above.

Fixes: 4ef5d6af4935 ("selftests/bpf: no need to track next_match_pos in struct test_loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: less spam in the log for message matching

When running test_loader based tests in the verbose mode each matched
message leaves a trace in the stderr, e.g.:

    ./test_progs -vvv -t ...
    validate_msgs:PASS:expect_msg 0 nsec
    validate_msgs:PASS:expect_msg 0 nsec
    validate_msgs:PASS:expect_msg 0 nsec
    validate_msgs:PASS:expect_msg 0 nsec
    validate_msgs:PASS:expect_msg 0 nsec

This is not very helpful when debugging such tests and clobbers the
log a lot.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge branch 'support-passing-bpf-iterator-to-kfuncs'

Andrii Nakryiko says:

====================
Support passing BPF iterator to kfuncs

Add support for passing BPF iterator state to any kfunc. Such kfunc has to
declare such argument with valid `struct bpf_iter_<type> *` type and should
use "__iter" suffix in argument name, following the established suffix-based
convention. We add a simple test/demo iterator getter in bpf_testmod.
====================

Link: https://lore.kernel.org/r/20240808232230.2848712-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: test passing iterator to a kfunc

Define BPF iterator "getter" kfunc, which accepts iterator pointer as
one of the arguments. Make sure that argument passed doesn't have to be
the very first argument (unlike new-next-destroy combo).

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: allow passing struct bpf_iter_<type> as kfunc arguments

There are potentially useful cases where a specific iterator type might
need to be passed into some kfunc. So, in addition to existing
bpf_iter_<type>_{new,next,destroy}() kfuncs, allow to pass iterator
pointer to any kfunc.

We employ "__iter" naming suffix for arguments that are meant to accept
iterators. We also enforce that they accept PTR -> STRUCT btf_iter_<type>
type chain and point to a valid initialized on-the-stack iterator state.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: extract iterator argument type and name validation logic

Verifier enforces that all iterator structs are named `bpf_iter_<name>`
and that whenever iterator is passed to a kfunc it's passed as a valid PTR ->
STRUCT chain (with potentially const modifiers in between).

We'll need this check for upcoming changes, so instead of duplicating
the logic, extract it into a helper function.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240808232230.2848712-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge tag '6.11-rc4-server-fixes' of git://git.samba.org/ksmbd

Pull smb server fixes from Steve French:

- important reconnect fix

- fix for memcpy issues on mount

- two minor cleanup patches

* tag '6.11-rc4-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: Replace one-element arrays with flexible-array members
  ksmbd: fix spelling mistakes in documentation
  ksmbd: fix race condition between destroy_previous_session() and smb2 operations()
  ksmbd: Use unsafe_memcpy() for ntlm_negotiate

erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails

If z_erofs_gbuf_growsize() partially fails on a global buffer due to
memory allocation failure or fault injection (as reported by syzbot [1]),
new pages need to be freed by comparing to the existing pages to avoid
memory leaks.

However, the old gbuf->pages[] array may not be large enough, which can
lead to null-ptr-deref or out-of-bound access.

Fix this by checking against gbuf->nrpages in advance.

[1] https://lore.kernel.org/r/000000000000f7b96e062018c6e3@google.com

Reported-by: syzbot+242ee56aaa9585553766@syzkaller.appspotmail.com
Fixes: d6db47e571dc ("erofs: do not use pagepool in z_erofs_gbuf_growsize()")
Cc: <stable@vger.kernel.org> # 6.10+
Reviewed-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240820085619.1375963-1-hsiangkao@linux.alibaba.com

Merge tag 'for-linus-iommufd' of git://git./linux/kernel/git/jgg/iommufd

Pull iommufd fixes from Jason Gunthorpe:

- Incorrect error unwind in iommufd_device_do_replace()

- Correct a sparse warning missing static

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Make dirty_ops static
iommufd/device: Fix hwpt at err_unresv in iommufd_device_do_replace()

Merge tag 'cxl-fixes-6.11-rc5' of git://git./linux/kernel/git/cxl/cxl

Pull cxl fixes from Dave Jiang:
"Check for RCH dport before accessing pci_host_bridge and a fix to
  address a KASAN warning for the cxl regression test suite cxl-test"

* tag 'cxl-fixes-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/test: Skip cxl_setup_parent_dport() for emulated dports
  cxl/pci: Get AER capability address from RCRB only for RCH dport

platform/x86: ISST: Fix return value on last invalid resource

When only the last resource is invalid, tpmi_sst_dev_add() is returing
error even if there are other valid resources before. This function
should return error when there are no valid resources.

Here tpmi_sst_dev_add() is returning "ret" variable. But this "ret"
variable contains the failure status of last call to sst_main(), which
failed for the invalid resource. But there may be other valid resources
before the last entry.

To address this, do not update "ret" variable for sst_main() return
status.

If there are no valid resources, it is already checked for by !inst
below the loop and -ENODEV is returned.

Fixes: 9d1d36268f3d ("platform/x86: ISST: Support partitioned systems")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org # 6.10+
Link: https://lore.kernel.org/r/20240816163626.415762-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Merge branch 'correct-recent-gcc-incompatible-changes'

Cupertino Miranda says:

====================
Correct recent GCC incompatible changes.

Hi everyone,

Apologies for the previous patches which did not include a cover letter.
My wish was to send 3 indepepdent patches but after the initial mistake lets keep
this as a series although they are all independent from themselves.

The changes in this patch series is related to recovering GCC support to
build the selftests.
A few tests and a makefile change have broken the support for GCC in the
last few months.

Looking forward to your comments.

Best regards,
Cupertino
====================

Link: https://lore.kernel.org/r/20240819151129.1366484-1-cupertino.miranda@oracle.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

selftest/bpf: Adapt inline asm operand constraint for GCC support

GCC errors when compiling tailcall_bpf2bpf_hierarchy2.c and
tailcall_bpf2bpf_hierarchy3.c with the following error:

progs/tailcall_bpf2bpf_hierarchy2.c: In function 'tailcall_bpf2bpf_hierarchy_2':
progs/tailcall_bpf2bpf_hierarchy2.c:66:9: error: input operand constraint contains '+'
66 | asm volatile (""::"r+"(ret));
| ^~~

Changed implementation to make use of __sink macro that abstracts the
desired behaviour.

The proposed change seems valid for both GCC and CLANG.

Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819151129.1366484-4-cupertino.miranda@oracle.com

selftests/bpf: Disable strict aliasing for verifier_nocsr.c

verfifier_nocsr.c fails to compile in GCC. The reason behind it was
initially explained in commit 27a90b14b93d3b2e1efd10764e456af7e2a42991.

"A few BPF selftests perform type punning and they may break strict
aliasing rules, which are exploited by both GCC and clang by default
while optimizing. This can lead to broken compiled programs."

Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819151129.1366484-2-cupertino.miranda@oracle.com

Merge branch 'bpf-enable-some-functions-in-cgroup-programs'

Matteo Croce says:

====================
bpf: enable some functions in cgroup programs

From: Matteo Croce <teknoraver@meta.com>

Enable some BPF kfuncs and the helper bpf_current_task_under_cgroup()
for program types BPF_CGROUP_*.
These will be used by systemd-networkd:
https://github.com/systemd/systemd/pull/32212

v5->v6:
Called register_btf_kfunc_id_set() only once
Fixed build error with !CONFIG_CGROUPS

v4->v5:
Same code, but v4 had an old cover letter

v3->v4:
Reset all the acked-by tags because the code changed a bit.

Signed-off-by: Matteo Croce <teknoraver@meta.com>
====================

Link: https://lore.kernel.org/r/20240819162805.78235-1-technoboy85@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

bpf: Allow bpf_current_task_under_cgroup() with BPF_CGROUP_*

The helper bpf_current_task_under_cgroup() currently is only allowed for
tracing programs, allow its usage also in the BPF_CGROUP_* program types.

Move the code from kernel/trace/bpf_trace.c to kernel/bpf/helpers.c,
so it compiles also without CONFIG_BPF_EVENTS.

This will be used in systemd-networkd to monitor the sysctl writes,
and filter it's own writes from others:
https://github.com/systemd/systemd/pull/32212

Signed-off-by: Matteo Croce <teknoraver@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819162805.78235-3-technoboy85@gmail.com

bpf: Enable generic kfuncs for BPF_CGROUP_* programs

These kfuncs are enabled even in BPF_PROG_TYPE_TRACING, so they
should be safe also in BPF_CGROUP_* programs.
Since all BPF_CGROUP_* programs share the same hook,
call register_btf_kfunc_id_set() only once.

In enum btf_kfunc_hook, rename BTF_KFUNC_HOOK_CGROUP_SKB to a more
generic BTF_KFUNC_HOOK_CGROUP, since it's used for all the cgroup
related program types.

Signed-off-by: Matteo Croce <teknoraver@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819162805.78235-2-technoboy85@gmail.com

Merge tag 'hid-for-linus-2024081901' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

- memory corruption fixes for hid-cougar (Camila Alvarez) and
   hid-amd_sfh (Olivier Sobrie)

- fix for regression in Wacom driver of twist gesture handling (Jason
   Gerecke)

- two new device IDs for hid-multitouch (Dmitry Savin) and hid-asus
   (Luke D. Jones)

* tag 'hid-for-linus-2024081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: wacom: Defer calculation of resolution until resolution_code is known
  HID: multitouch: Add support for GT7868Q
  HID: amd_sfh: free driver_data after destroying hid device
  hid-asus: add ROG Ally X prod ID to quirk list
  HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup

Merge tag 'printk-for-6.11-rc5' of git://git./linux/kernel/git/printk/linux

Pull printk fix from Petr Mladek:

- Do not block printk on non-panic CPUs when they are dumping
backtraces

* tag 'printk-for-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/panic: Allow cpu backtraces to be written into ringbuffer during panic

iommufd/selftest: Make dirty_ops static

The sparse tool complains as follows:

drivers/iommu/iommufd/selftest.c:277:30: warning:
symbol 'dirty_ops' was not declared. Should it be static?

This symbol is not used outside of selftest.c, so marks it static.

Fixes: 266ce58989ba ("iommufd/selftest: Test IOMMU_HWPT_ALLOC_DIRTY_TRACKING")
Link: https://patch.msgid.link/r/20240819120007.3884868-1-ruanjinjie@huawei.com
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

erofs: allow large folios for compressed files

As commit 2e6506e1c4ee ("mm/migrate: fix deadlock in
migrate_pages_batch() on large folios") has landed upstream, large
folios can be safely enabled for compressed inodes since all
prerequisites have already landed in 6.11-rc1.

Stress tests has been running on my fleet for over 20 days without any
regression. Additionally, users [1] have requested it for months.
Let's allow large folios for EROFS full cases upstream now for wider
testing.

[1] https://lore.kernel.org/r/CAGsJ_4wtE8OcpinuqVwG4jtdx6Qh5f+TON6wz+4HMCq=A2qFcA@mail.gmail.com

Cc: Barry Song <21cnbao@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
[ Gao Xiang: minor commit typo fixes. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240819025207.3808649-1-hsiangkao@linux.alibaba.com

erofs: get rid of check_layout_compatibility()

Simple enough to just open-code it.

Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240806112208.150323-1-hongzhen@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

erofs: simplify readdir operation

- Use i_size instead of i_size_read() due to immutable fses;

- Get rid of an unneeded goto since erofs_fill_dentries() also works;

- Remove unnecessary lines.

Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240801112622.2164029-1-hongzhen@linux.alibaba.com
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

ksmbd: Replace one-element arrays with flexible-array members

Replace the deprecated one-element arrays with flexible-array members
in the structs filesystem_attribute_info and filesystem_device_info.

There are no binary differences after this conversion.

Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: fix spelling mistakes in documentation

There are a couple of spelling mistakes in the documentation. This patch
fixes them.

Signed-off-by: Victor Timofei <victor@vtimothy.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: fix race condition between destroy_previous_session() and smb2 operations()

If there is ->PreviousSessionId field in the session setup request,
The session of the previous connection should be destroyed.
During this, if the smb2 operation requests in the previous session are
being processed, a racy issue could happen with ksmbd_destroy_file_table().
This patch sets conn->status to KSMBD_SESS_NEED_RECONNECT to block
incoming operations and waits until on-going operations are complete
(i.e. idle) before desctorying the previous session.

Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25040
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: Use unsafe_memcpy() for ntlm_negotiate

rsp buffer is allocated larger than spnego_blob from
smb2_allocate_rsp_buf().

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Linux 6.11-rc4

Merge tag 'driver-core-6.11-rc4' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
"Here are two driver fixes for regressions from 6.11-rc1 due to the
  driver core change making a structure in a driver core callback const.

  These were missed by all testing EXCEPT for what Bart happened to be
  running, so I appreciate the fixes provided here for some
  odd/not-often-used driver subsystems that nothing else happened to
  catch.

  Both of these fixes have been in linux-next all week with no reported
  issues"

* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  mips: sgi-ip22: Fix the build
  ARM: riscpc: ecard: Fix the build

Merge tag 'char-misc-6.11-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
  problems. Included in here are:

   - fastrpc revert of a change that broke userspace

   - xillybus fixes for reported issues

  Half of these have been in linux-next this week with no reported
  problems, I don't know if the last bit of xillybus driver changes made
  it in, but they are 'obviously correct' so will be safe :)"

* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  char: xillybus: Check USB endpoints when probing device
  char: xillybus: Refine workqueue handling
  Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
  char: xillybus: Don't destroy workqueue from work item running on it

Merge tag 'tty-6.11-rc4' of git://git./linux/kernel/git/gregkh/tty

Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.11-rc4 to
  resolve some reported problems. Included in here are:

   - conmakehash.c userspace build issues

   - fsl_lpuart driver fix

   - 8250_omap revert for reported regression

   - atmel_serial rts flag fix

  All of these have been in linux-next this week with no reported
  issues"

* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
  tty: atmel_serial: use the correct RTS flag.
  tty: vt: conmakehash: remove non-portable code printing comment header
  tty: serial: fsl_lpuart: mark last busy before uart_add_one_port

Merge tag 'usb-6.11-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
  resolve some reported issues. Included in here are:

   - thunderbolt driver fixes for reported problems

   - typec driver fixes

   - xhci fixes

   - new device id for ljca usb driver

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
  usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
  Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
  usb: typec: ucsi: Fix the return value of ucsi_run_command()
  usb: xhci: fix duplicate stall handling in handle_tx_event()
  usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
  thunderbolt: Mark XDomain as unplugged when router is removed
  thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()

Merge tag 'for-6.11-rc3-tag' of git://git./linux/kernel/git/kdave/linux

Pull more btrfs fixes from David Sterba:
"A more fixes. We got reports that shrinker added in 6.10 still causes
  latency spikes and the fixes don't handle all corner cases. Due to
  summer holidays we're taking a shortcut to disable it for release
  builds and will fix it in the near future.

   - only enable extent map shrinker for DEBUG builds, temporary quick
     fix to avoid latency spikes for regular builds

   - update target inode's ctime on unlink, mandated by POSIX

   - properly take lock to read/update block group's zoned variables

   - add counted_by() annotations"

* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: only enable extent map shrinker for DEBUG builds
  btrfs: zoned: properly take lock to read/update block group's zoned variables
  btrfs: tree-checker: add dev extent item checks
  btrfs: update target inode's ctime on unlink
  btrfs: send: annotate struct name_cache_entry with __counted_by()

fuse: Initialize beyond-EOF page contents before setting uptodate

fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).

So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.

The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().

This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).

Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f258230 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git./linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
"16 hotfixes. All except one are for MM. 10 of these are cc:stable and
  the others pertain to post-6.10 issues.

  As usual with these merges, singletons and doubletons all over the
  place, no identifiable-by-me theme. Please see the lovingly curated
  changelogs to get the skinny"

* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/migrate: fix deadlock in migrate_pages_batch() on large folios
  alloc_tag: mark pages reserved during CMA activation as not tagged
  alloc_tag: introduce clear_page_tag_ref() helper function
  crash: fix riscv64 crash memory reserve dead loop
  selftests: memfd_secret: don't build memfd_secret test on unsupported arches
  mm: fix endless reclaim on machines with unaccepted memory
  selftests/mm: compaction_test: fix off by one in check_compaction()
  mm/numa: no task_numa_fault() call if PMD is changed
  mm/numa: no task_numa_fault() call if PTE is changed
  mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
  mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
  mm: don't account memmap per-node
  mm: add system wide stats items category
  mm: don't account memmap on failure
  mm/hugetlb: fix hugetlb vs. core-mm PT locking
  mseal: fix is_madv_discard()

Merge tag 'powerpc-6.11-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix crashes on 85xx with some configs since the recent hugepd rework.

- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
   platforms.

- Don't enable offline cores when changing SMT modes, to match existing
   userspace behaviour.

Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.

* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/topology: Check if a core is online
  cpu/SMT: Enable SMT only if a core is online
  powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
  powerpc/mm: Fix size of allocated PGDIR
  soc: fsl: qbman: remove unused struct 'cgr_comp'

Merge tag 'v6.11-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

- fix for clang warning - additional null check

- fix for cached write with posix locks

- flexible structure fix

* tag 'v6.11-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: smb2pdu.h: Use static_assert() to check struct sizes
  smb3: fix lock breakage for cached writes
  smb/client: avoid possible NULL dereference in cifs_free_subrequest()

Merge tag 'i2c-for-6.11-rc4' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"I2C core fix replacing IS_ENABLED() with IS_REACHABLE()

  For host drivers, there are two fixes:

   - Tegra I2C Controller: Addresses a potential double-locking issue
     during probe. ACPI devices are not IRQ-safe when invoking runtime
     suspend and resume functions, so the irq_safe flag should not be
     set.

   - Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
     of the runtime_resume() function, which was missed in the previous
     release"

* tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: tegra: Do not mark ACPI devices as irq safe
  i2c: Use IS_REACHABLE() for substituting empty ACPI functions
  i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Two small fixes to the mpi3mr driver. One to avoid oversize
  allocations in tracing and the other to fix an uninitialized spinlock
  in the user to driver feature request code (used to trigger dumps and
  the like)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpi3mr: Avoid MAX_PAGE_ORDER WARNING for buffer allocations
  scsi: mpi3mr: Add missing spin_lock_init() for mrioc->trigger_lock

Merge tag 'xfs-6.11-fixes-3' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Chandan Babu:

- Check for presence of only 'attr' feature before scrubbing an inode's
   attribute fork.

- Restore the behaviour of setting AIL thread to TASK_INTERRUPTIBLE for
   long (i.e. 50ms) sleep durations to prevent high load averages.

- Do not allow users to change the realtime flag of a file unless the
   datadev and rtdev both support fsdax access modes.

* tag 'xfs-6.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: conditionally allow FS_XFLAG_REALTIME changes if S_DAX is set
  xfs: revert AIL TASK_KILLABLE threshold
  xfs: attr forks require attr, not attr2

Merge tag 'bcachefs-2024-08-16' of git://evilpiepirate.org/bcachefs

Pull bcachefs fixes from Kent OverstreetL

- New on disk format version, bcachefs_metadata_version_disk_accounting_inum

   This adds one more disk accounting counter, which counts disk usage
   and number of extents per inode number. This lets us track
   fragmentation, for implementing defragmentation later, and it also
   counts disk usage per inode in all snapshots, which will be a useful
   thing to expose to users.

- One performance issue we've observed is threads spinning when they
   should be waiting for dirty keys in the key cache to be flushed by
   journal reclaim, so we now have hysteresis for the waiting thread, as
   well as improving the tracepoint and a new time_stat, for tracking
   time blocked waiting on key cache flushing.

... and various assorted smaller fixes.

* tag 'bcachefs-2024-08-16' of git://evilpiepirate.org/bcachefs:
  bcachefs: Fix locking in __bch2_trans_mark_dev_sb()
  bcachefs: fix incorrect i_state usage
  bcachefs: avoid overflowing LRU_TIME_BITS for cached data lru
  bcachefs: Fix forgetting to pass trans to fsck_err()
  bcachefs: Increase size of cuckoo hash table on too many rehashes
  bcachefs: bcachefs_metadata_version_disk_accounting_inum
  bcachefs: Kill __bch2_accounting_mem_mod()
  bcachefs: Make bkey_fsck_err() a wrapper around fsck_err()
  bcachefs: Fix warning in __bch2_fsck_err() for trans not passed in
  bcachefs: Add a time_stat for blocked on key cache flush
  bcachefs: Improve trans_blocked_journal_reclaim tracepoint
  bcachefs: Add hysteresis to waiting on btree key cache flush
  lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
  bcachefs: Convert for_each_btree_node() to lockrestart_do()
  bcachefs: Add missing downgrade table entry
  bcachefs: disk accounting: ignore unknown types
  bcachefs: bch2_accounting_invalid() fixup
  bcachefs: Fix bch2_trigger_alloc when upgrading from old versions
  bcachefs: delete faulty fastpath in bch2_btree_path_traverse_cached()

bcachefs: Fix locking in __bch2_trans_mark_dev_sb()

We run this in full RW mode now, so we have to guard against the
superblock buffer being reallocated.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs

Pull memcg-v1 fix from Al Viro:
"memcg_write_event_control() oops fix"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
memcg_write_event_control(): fix a user-triggerable oops

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Fix the arm64 __get_mem_asm() to use the _ASM_EXTABLE_##type##ACCESS()
   macro instead of the *_ERR() one in order to avoid writing -EFAULT to
   the value register in case of a fault

- Initialise all elements of the acpi_early_node_map[] to NUMA_NO_NODE.
   Prior to this fix, only the first element was initialised

- Move the KASAN random tag seed initialisation after the per-CPU areas
   have been initialised (prng_state is __percpu)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix KASAN random tag seed initialization
  arm64: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
  arm64: uaccess: correct thinko in __get_mem_asm()

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fix from Stephen Boyd:
"One fix for the new T-Head TH1520 clk driver that marks a bus clk
  critical so that it isn't turned off during late init which breaks
  emmc-sdio"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: thead: fix dependency on clk_ignore_unused

Merge tag 'block-6.11-20240824' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- Fix corruption issues with s390/dasd (Eric, Stefan)

- Fix a misuse of non irq locking grab of a lock (Li)

- MD pull request with a single data corruption fix for raid1 (Yu)

* tag 'block-6.11-20240824' of git://git.kernel.dk/linux:
  block: Fix lockdep warning in blk_mq_mark_tag_wait
  md/raid1: Fix data corruption for degraded array with slow disk
  s390/dasd: fix error recovery leading to data corruption on ESE devices
  s390/dasd: Remove DMA alignment

Merge tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:

- Fix a comment in the uapi header using the wrong member name (Caleb)

- Fix KCSAN warning for a debug check in sqpoll (me)

- Two more NAPI tweaks (Olivier)

* tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux:
  io_uring: fix user_data field name in comment
  io_uring/sqpoll: annotate debug task == current with data_race()
  io_uring/napi: remove duplicate io_napi_entry timeout assignation
  io_uring/napi: check napi_enabled in io_napi_add() before proceeding

Merge tag 'devicetree-fixes-for-6.11-2' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

- Fix a possible (but unlikely) out-of-bounds read in interrupts
   parsing code

- Add AT25 EEPROM "fujitsu,mb85rs256" compatible

- Update Konrad Dybcio's email

* tag 'devicetree-fixes-for-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of/irq: Prevent device address out-of-bounds read in interrupt map walk
  dt-bindings: eeprom: at25: add fujitsu,mb85rs256 compatible
  dt-bindings: Batch-update Konrad Dybcio's email

btrfs: only enable extent map shrinker for DEBUG builds

Although there are several patches improving the extent map shrinker,
there are still reports of too frequent shrinker behavior, taking too
much CPU for the kswapd process.

So let's only enable extent shrinker for now, until we got more
comprehensive understanding and a better solution.

Link: https://lore.kernel.org/linux-btrfs/3df4acd616a07ef4d2dc6bad668701504b412ffc.camel@intelfx.name/
Link: https://lore.kernel.org/linux-btrfs/c30fd6b3-ca7a-4759-8a53-d42878bf84f7@gmail.com/
Fixes: 956a17d9d050 ("btrfs: add a shrinker for extent maps")
CC: stable@vger.kernel.org # 6.10+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Merge tag 'thermal-6.11-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull thermal control fix from Rafael Wysocki:
"Fix a Bang-bang thermal governor issue causing it to fail to reset the
  state of cooling devices if they are 'on' to start with, but the
  thermal zone temperature is always below the corresponding trip point
  (Rafael Wysocki)"

* tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: gov_bang_bang: Use governor_data to reduce overhead
  thermal: gov_bang_bang: Add .manage() callback
  thermal: gov_bang_bang: Split bang_bang_control()
  thermal: gov_bang_bang: Call __thermal_cdev_update() directly

Merge tag 'acpi-6.11-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
"Fix an issue related to the ACPI EC device handling that causes the
  _REG control method to be evaluated for EC operation regions that are
  not expected to be used.

  This confuses the platform firmware and provokes various types of
  misbehavior on some systems (Rafael Wysocki)"

* tag 'acpi-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: EC: Evaluate _REG outside the EC scope more carefully
  ACPICA: Add a depth argument to acpi_execute_reg_methods()
  Revert "ACPI: EC: Evaluate orphan _REG under EC device"

Merge tag 'libnvdimm-fixes-6.11-rc4' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fix from Ira Weiny:
"Commit f467fee48da4 ("block: move the dax flag to queue_limits") broke
  the DAX tests by skipping over the legacy pmem mapping pages case.

  Set the DAX flag in this case as well"

* tag 'libnvdimm-fixes-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm/pmem: Set dax flag for all 'PFN_MAP' cases

io_uring: fix user_data field name in comment

io_uring_cqe's user_data field refers to `sqe->data`, but io_uring_sqe
does not have a data field. Fix the comment to say `sqe->user_data`.

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://github.com/axboe/liburing/pull/1206
Link: https://lore.kernel.org/r/20240816181526.3642732-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux

Pull rust fixes from Miguel Ojeda:

- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked in
   upstream Rust for the upcoming 1.82.0).

- Fix support for the latest version of rust-analyzer due to a change
   on rust-analyzer config file semantics (considered a fix since most
   developers use the latest version of the tool, which is the only one
   actually supported by upstream). I am discussing stability of the
   config file with upstream -- they may be able to start versioning it.

- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
   libclang (bindgen).

- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
   suppress error messages in a foreign architecture chroot and to use a
   proper default format.

- Clean 'rust-analyzer' target warning due to missing recursive make
   invocation mark.

- Clean Clippy warning due to missing indentation in docs.

- Clean LLVM 19 build warning due to removed 3dnow feature upstream.

* tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux:
  rust: x86: remove `-3dnow{,a}` from target features
  kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursive
  rust: add intrinsics to fix `-Os` builds
  kbuild: rust: skip -fmin-function-alignment in bindgen flags
  rust: Support latest version of `rust-analyzer`
  rust: macros: indent list item in `module!`'s docs
  rust: fix the default format for CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
  rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT

Merge tag 'riscv-for-linus-6.11-rc4' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- reintroduce the text patching global icache flush

- fix syscall entry code to correctly initialize a0, which manifested
   as a strace bug

- XIP kernels now map the entire kernel, which fixes boot under at
   least DEBUG_VIRTUAL=y

- initialize all nodes in the acpi_early_node_map initializer

- fix OOB access in the Andes vendor extension probing code

- A new key for scalar misaligned access performance in hwprobe, which
   correctly treat the values as an enum (as opposed to a bitmap)

* tag 'riscv-for-linus-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix out-of-bounds when accessing Andes per hart vendor extension array
  RISC-V: hwprobe: Add SCALAR to misaligned perf defines
  RISC-V: hwprobe: Add MISALIGNED_PERF key
  RISC-V: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
  riscv: change XIP's kernel_map.size to be size of the entire kernel
  riscv: entry: always initialize regs->a0 to -ENOSYS
  riscv: Re-introduce global icache flush in patch_text_XXX()

Merge tag 'trace-v6.11-rc3' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:
"A couple of fixes for tracing:

   - Prevent a NULL pointer dereference in the error path of RTLA tool

   - Fix an infinite loop bug when reading from the ring buffer when
     closed. If there's a thread trying to read the ring buffer and it
     gets closed by another thread, the one reading will go into an
     infinite loop when the buffer is empty instead of exiting back to
     user space"

* tag 'trace-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rtla/osnoise: Prevent NULL dereference in error handling
  tracing: Return from tracing_buffers_read() if the file has been closed

Merge tag 'keys-trusted-next-6.11-rc4' of git://git./linux/kernel/git/jarkko/linux-tpmdd

Pull key fixes from Jarkko Sakkinen:
"Two bug fixes for a memory corruption bug and a memory leak bug in the
  DCP trusted keys type.

  Just as a reminder DCP was a crypto coprocessor in i.MX SoCs"

* tag 'keys-trusted-next-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  KEYS: trusted: dcp: fix leak of blob encryption key
  KEYS: trusted: fix DCP blob payload length assignment

bcachefs: fix incorrect i_state usage

Reported-by: syzbot+95e40eae71609e40d851@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: avoid overflowing LRU_TIME_BITS for cached data lru

Reported-by: syzbot+510b0b28f8e6de64d307@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix forgetting to pass trans to fsck_err()

Reported-by: syzbot+e3938cd6d761b78750e6@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Increase size of cuckoo hash table on too many rehashes

Also, improve the calculation of the new table size, so that it can
shrink when needed.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'for-6.11/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mikulas Patocka:

- fix misbehavior if suspend or resume is interrupted by a signal

- fix wrong indentation in dm-crypt.rst

- fix memory allocation failure in dm-persistent-data

* tag 'for-6.11/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm persistent data: fix memory allocation failure
  Documentation: dm-crypt.rst warning + error fix
  dm resume: don't return EINVAL when signalled
  dm suspend: return -ERESTARTSYS instead of -EINTR

Merge tag 'iommu-fixes-v6.11-rc3' of git://git./linux/kernel/git/iommu/linux

Pull iommu fixes from Joerg Roedel:

- Bring back a lost return statement in io-page-fault code

- Remove an unused function declaration

* tag 'iommu-fixes-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: Remove unused declaration iommu_sva_unbind_gpasid()
iommu: Restore lost return in iommu_report_device_fault()

Merge tag 'gpio-fixes-for-v6.11-rc4' of git://git./linux/kernel/git/brgl/linux

Pull gpio fix from Bartosz Golaszewski:

- add the shutdown() callback to gpio-mlxbf3 in order to disable
interrupts during graceful reboot

* tag 'gpio-fixes-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf3: Support shutdown() function

Merge tag 'sound-6.11-rc4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"All small fixes, mostly for usual suspects, HD-audio and USB-audio
  device-specific fixes / quirks. The Cirrus codec support took the
  update of SPI header as well. Other than that, there is a regression
  fix in the sanity check of ALSA timer code"

* tag 'sound-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/tas2781: Use correct endian conversion
  ALSA: usb-audio: Support Yamaha P-125 quirk entry
  ALSA: hda: cs35l41: Remove redundant call to hda_cs_dsp_control_remove()
  ALSA: hda: cs35l56: Remove redundant call to hda_cs_dsp_control_remove()
  ALSA: hda/tas2781: fix wrong calibrated data order
  ALSA: usb-audio: Add delay quirk for VIVO USB-C-XE710 HEADSET
  ALSA: hda/realtek: Add support for new HP G12 laptops
  ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7
  ALSA: timer: Relax start tick time check for slave timer elements
  spi: Add empty versions of ACPI functions

Merge tag 'drm-fixes-2024-08-16' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu and xe. The larger amdgpu fix is for a
  new IP block introduced in rc1, so should be fine. The xe fixes
  contain some missed fixes from the end of the previous round along
  with some fixes which required precursor changes, but otherwise
  everything seems fine,

  mediatek:
   - fix cursor crash

  amdgpu:
   - Fix MES ring buffer overflow
   - DCN 3.5 fix
   - DCN 3.2.1 fix
   - DP MST fix
   - Cursor fixes
   - JPEG fixes
   - Context ops validation
   - MES 12 fixes
   - VCN 5.0 fix
   - HDP fix

  panel:
   - dt bindings style fix
   - orientation quirks

  rockchip:
   - inno-hdmi: fix infoframe upload

  v3d:
   - fix OOB access in v3d_csd_job_run()

  xe:
   - Validate user fence during creation
   - Fix use after free when client stats are captured
   - SRIOV fixes
   - Runtime PM fixes"

* tag 'drm-fixes-2024-08-16' of https://gitlab.freedesktop.org/drm/kernel: (37 commits)
  drm/xe: Hold a PM ref when GT TLB invalidations are inflight
  drm/xe: Drop xe_gt_tlb_invalidation_wait
  drm/xe: Add xe_gt_tlb_invalidation_fence_init helper
  drm/xe/pf: Fix VF config validation on multi-GT platforms
  drm/xe: Build PM into GuC CT layer
  drm/xe/vf: Fix register value lookup
  drm/xe: Fix use after free when client stats are captured
  drm/xe: Take a ref to xe file when user creates a VM
  drm/xe: Add ref counting for xe_file
  drm/xe: Move part of xe_file cleanup to a helper
  drm/xe: Validate user fence during creation
  drm/rockchip: inno-hdmi: Fix infoframe upload
  drm/amd/amdgpu: add HDP_SD support on gc 12.0.0/1
  drm/amdgpu: Update kmd_fw_shared for VCN5
  drm/amd/amdgpu: command submission parser for JPEG
  drm/amdgpu/mes12: fix suspend issue
  drm/amdgpu/mes12: sw/hw fini for unified mes
  drm/amdgpu/mes12: configure two pipes hardware resources
  drm/amdgpu/mes12: adjust mes12 sw/hw init for multiple pipes
  drm/amdgpu/mes12: add mes pipe switch support
  ...

Merge tag 'i2c-host-fixes-6.11-rc4' of git://git./linux/kernel/git/andi.shyti/linux into i2c/for-current

Two fixes in this update:

Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.

Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the
previous release.

thermal: gov_bang_bang: Use governor_data to reduce overhead

After running once, the for_each_trip_desc() loop in
bang_bang_manage() is pure needless overhead because it is not going to
make any changes unless a new cooling device has been bound to one of
the trips in the thermal zone or the system is resuming from sleep.

For this reason, make bang_bang_manage() set governor_data for the
thermal zone and check it upfront to decide whether or not it needs to
do anything.

However, governor_data needs to be reset in some cases to let
bang_bang_manage() know that it should walk the trips again, so add an
.update_tz() callback to the governor and make the core additionally
invoke it during system resume.

To avoid affecting the other users of that callback unnecessarily, add
a special notification reason for system resume, THERMAL_TZ_RESUME, and
also pass it to __thermal_zone_device_update() called during system
resume for consistency.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/2285575.iZASKD2KPV@rjwysocki.net

thermal: gov_bang_bang: Add .manage() callback

After recent changes, the Bang-bang governor may not adjust the
initial configuration of cooling devices to the actual situation.

Namely, if a cooling device bound to a certain trip point starts in
the "on" state and the thermal zone temperature is below the threshold
of that trip point, the trip point may never be crossed on the way up
in which case the state of the cooling device will never be adjusted
because the thermal core will never invoke the governor's
.trip_crossed() callback. [Note that there is no issue if the zone
temperature is at the trip threshold or above it to start with because
.trip_crossed() will be invoked then to indicate the start of thermal
mitigation for the given trip.]

To address this, add a .manage() callback to the Bang-bang governor
and use it to ensure that all of the thermal instances managed by the
governor have been initialized properly and the states of all of the
cooling devices involved have been adjusted to the current zone
temperature as appropriate.

Fixes: 530c932bdf75 ("thermal: gov_bang_bang: Use .trip_crossed() instead of .throttle()")
Link: https://lore.kernel.org/linux-pm/1bfbbae5-42b0-4c7d-9544-e98855715294@piie.net/
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/8419356.T7Z3S40VBb@rjwysocki.net

thermal: gov_bang_bang: Split bang_bang_control()

Move the setting of the thermal instance target state from
bang_bang_control() into a separate function that will be also called
in a different place going forward.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/3313587.aeNJFYEL58@rjwysocki.net

thermal: gov_bang_bang: Call __thermal_cdev_update() directly

Instead of clearing the "updated" flag for each cooling device
affected by the trip point crossing in bang_bang_control() and
walking all thermal instances to run thermal_cdev_update() for all
of the affected cooling devices, call __thermal_cdev_update()
directly for each of them.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/13583081.uLZWGnKmhe@rjwysocki.net

char: xillybus: Check USB endpoints when probing device

Ensure, as the driver probes the device, that all endpoints that the
driver may attempt to access exist and are of the correct type.

All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at
address 1. This is verified in xillyusb_setup_base_eps().

On top of that, a XillyUSB device may have additional Bulk OUT
endpoints. The information about these endpoints' addresses is deduced
from a data structure (the IDT) that the driver fetches from the device
while probing it. These endpoints are checked in setup_channels().

A XillyUSB device never has more than one IN endpoint, as all data
towards the host is multiplexed in this single Bulk IN endpoint. This is
why setup_channels() only checks OUT endpoints.

Reported-by: syzbot+eac39cba052f2e750dbe@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/all/0000000000001d44a6061f7a54ee@google.com/T/
Fixes: a53d1202aef1 ("char: xillybus: Add driver for XillyUSB (Xillybus variant for USB)").
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20240816070200.50695-2-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

char: xillybus: Refine workqueue handling

As the wakeup work item now runs on a separate workqueue, it needs to be
flushed separately along with flushing the device's workqueue.

Also, move the destroy_workqueue() call to the end of the exit method,
so that deinitialization is done in the opposite order of
initialization.

Fixes: ccbde4b128ef ("char: xillybus: Don't destroy workqueue from work item running on it")
Cc: stable <stable@kernel.org>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20240816070200.50695-1-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/migrate: fix deadlock in migrate_pages_batch() on large folios

Currently, migrate_pages_batch() can lock multiple locked folios with an
arbitrary order.  Although folio_trylock() is used to avoid deadlock as
commit 2ef7dbb26990 ("migrate_pages: try migrate in batch asynchronously
firstly") mentioned, it seems try_split_folio() is still missing.

It was found by compaction stress test when I explicitly enable EROFS
compressed files to use large folios, which case I cannot reproduce with
the same workload if large folio support is off (current mainline).
Typically, filesystem reads (with locked file-backed folios) could use
another bdev/meta inode to load some other I/Os (e.g.  inode extent
metadata or caching compressed data), so the locking order will be:

  file-backed folios  (A)
     bdev/meta folios (B)

The following calltrace shows the deadlock:
   Thread 1 takes (B) lock and tries to take folio (A) lock
   Thread 2 takes (A) lock and tries to take folio (B) lock

[Thread 1]
INFO: task stress:1824 blocked for more than 30 seconds.
      Tainted: G           OE      6.10.0-rc7+ #6
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:stress          state:D stack:0     pid:1824  tgid:1824  ppid:1822   flags:0x0000000c
Call trace:
__switch_to+0xec/0x138
__schedule+0x43c/0xcb0
schedule+0x54/0x198
io_schedule+0x44/0x70
folio_wait_bit_common+0x184/0x3f8
<-- folio mapping ffff00036d69cb18 index 996  (**)
__folio_lock+0x24/0x38
migrate_pages_batch+0x77c/0xea0 // try_split_folio (mm/migrate.c:1486:2)
// migrate_pages_batch (mm/migrate.c:1734:16)
<--- LIST_HEAD(unmap_folios) has
..
folio mapping 0xffff0000d184f1d8 index 1711;   (*)
folio mapping 0xffff0000d184f1d8 index 1712;
..
migrate_pages+0xb28/0xe90
compact_zone+0xa08/0x10f0
compact_node+0x9c/0x180
sysctl_compaction_handler+0x8c/0x118
proc_sys_call_handler+0x1a8/0x280
proc_sys_write+0x1c/0x30
vfs_write+0x240/0x380
ksys_write+0x78/0x118
__arm64_sys_write+0x24/0x38
invoke_syscall+0x78/0x108
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x148
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x190/0x198

[Thread 2]
INFO: task stress:1825 blocked for more than 30 seconds.
      Tainted: G           OE      6.10.0-rc7+ #6
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:stress          state:D stack:0     pid:1825  tgid:1825  ppid:1822   flags:0x0000000c
Call trace:
__switch_to+0xec/0x138
__schedule+0x43c/0xcb0
schedule+0x54/0x198
io_schedule+0x44/0x70
folio_wait_bit_common+0x184/0x3f8
<-- folio = 0xfffffdffc6b503c0 (mapping == 0xffff0000d184f1d8 index == 1711) (*)
__folio_lock+0x24/0x38
z_erofs_runqueue+0x384/0x9c0 [erofs]
z_erofs_readahead+0x21c/0x350 [erofs]       <-- folio mapping 0xffff00036d69cb18 range from [992, 1024] (**)
read_pages+0x74/0x328
page_cache_ra_order+0x26c/0x348
ondemand_readahead+0x1c0/0x3a0
page_cache_sync_ra+0x9c/0xc0
filemap_get_pages+0xc4/0x708
filemap_read+0x104/0x3a8
generic_file_read_iter+0x4c/0x150
vfs_read+0x27c/0x330
ksys_pread64+0x84/0xd0
__arm64_sys_pread64+0x28/0x40
invoke_syscall+0x78/0x108
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x148
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x190/0x198

Link: https://lkml.kernel.org/r/20240729021306.398286-1-hsiangkao@linux.alibaba.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

alloc_tag: mark pages reserved during CMA activation as not tagged

During CMA activation, pages in CMA area are prepared and then freed
without being allocated. This triggers warnings when memory allocation
debug config (CONFIG_MEM_ALLOC_PROFILING_DEBUG) is enabled. Fix this by
marking these pages not tagged before freeing them.

Link: https://lkml.kernel.org/r/20240813150758.855881-2-surenb@google.com
Fixes: d224eb0287fb ("codetag: debug: mark codetags for reserved pages as empty")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [6.10]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

alloc_tag: introduce clear_page_tag_ref() helper function

In several cases we are freeing pages which were not allocated using
common page allocators. For such cases, in order to keep allocation
accounting correct, we should clear the page tag to indicate that the page
being freed is expected to not have a valid allocation tag. Introduce
clear_page_tag_ref() helper function to be used for this.

Link: https://lkml.kernel.org/r/20240813150758.855881-1-surenb@google.com
Fixes: d224eb0287fb ("codetag: debug: mark codetags for reserved pages as empty")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [6.10]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

crash: fix riscv64 crash memory reserve dead loop

On RISCV64 Qemu machine with 512MB memory, cmdline "crashkernel=500M,high"
will cause system stall as below:

Zone ranges:
   DMA32    [mem 0x0000000080000000-0x000000009fffffff]
   Normal   empty
Movable zone start for each node
Early memory node ranges
   node   0: [mem 0x0000000080000000-0x000000008005ffff]
   node   0: [mem 0x0000000080060000-0x000000009fffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
(stall here)

commit 5d99cadf1568 ("crash: fix x86_32 crash memory reserve dead loop
bug") fix this on 32-bit architecture.  However, the problem is not
completely solved.  If `CRASH_ADDR_LOW_MAX = CRASH_ADDR_HIGH_MAX` on
64-bit architecture, for example, when system memory is equal to
CRASH_ADDR_LOW_MAX on RISCV64, the following infinite loop will also
occur:

-> reserve_crashkernel_generic() and high is true
   -> alloc at [CRASH_ADDR_LOW_MAX, CRASH_ADDR_HIGH_MAX] fail
      -> alloc at [0, CRASH_ADDR_LOW_MAX] fail and repeatedly
         (because CRASH_ADDR_LOW_MAX = CRASH_ADDR_HIGH_MAX).

As Catalin suggested, do not remove the ",high" reservation fallback to
",low" logic which will change arm64's kdump behavior, but fix it by
skipping the above situation similar to commit d2f32f23190b ("crash: fix
x86_32 crash memory reserve dead loop").

After this patch, it print:
cannot allocate crashkernel (size:0x1f400000)

Link: https://lkml.kernel.org/r/20240812062017.2674441-1-ruanjinjie@huawei.com
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Dave Young <dyoung@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests: memfd_secret: don't build memfd_secret test on unsupported arches

[1] mentions that memfd_secret is only supported on arm64, riscv, x86 and
x86_64 for now.  It doesn't support other architectures.  I found the
build error on arm and decided to send the fix as it was creating noise on
KernelCI:

memfd_secret.c: In function 'memfd_secret':
memfd_secret.c:42:24: error: '__NR_memfd_secret' undeclared (first use in this function);
did you mean 'memfd_secret'?
   42 |         return syscall(__NR_memfd_secret, flags);
      |                        ^~~~~~~~~~~~~~~~~
      |                        memfd_secret

Hence I'm adding condition that memfd_secret should only be compiled on
supported architectures.

Also check in run_vmtests script if memfd_secret binary is present before
executing it.

Link: https://lkml.kernel.org/r/20240812061522.1933054-1-usama.anjum@collabora.com
Link: https://lore.kernel.org/all/20210518072034.31572-7-rppt@kernel.org/
Link: https://lkml.kernel.org/r/20240809075642.403247-1-usama.anjum@collabora.com
Fixes: 76fe17ef588a ("secretmem: test: add basic selftest for memfd_secret(2)")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>