drm/i915: Record default HW state in the GPU error state

It may be of interest to both compare the active HW context against the
default (aka NULL) context, to see what has been changed and if either are
corrupt.

v2: Rename the fake vma as fake.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171126220901.14735-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Flush everything on switching to the kernel_context

Even though all rendering should have been flushed at the end of the
previous requests, add an extra flush after switching to the
kernel_context. As the switch to the kernel_context is used when idling
the gpu (e.g. suspend), having an extra layer of paranoia to ensure
everything is flushed to memory seems sensible.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171126214856.23702-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: hide unused intel_panel_set_backlight function

Building i915 without backlight support results in a harmless warning
for intel_panel_set_backlight:

drivers/gpu/drm/i915/intel_panel.c:653:13: error: 'intel_panel_set_backlight' defined but not used [-Werror=unused-function]

This moves it into the CONFIG_BACKLIGHT_CLASS_DEVICE section that
its caller is in.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127151239.1813673-2-arnd@arndb.de

drm/i915: fix intel_backlight_device_register declaration

The alternative intel_backlight_device_register() definition apparently
never got used, but I have now run into a case of i915 being compiled
without CONFIG_BACKLIGHT_CLASS_DEVICE, resulting in a number of
identical warnings:

drivers/gpu/drm/i915/intel_drv.h:1739:12: error: 'intel_backlight_device_register' defined but not used [-Werror=unused-function]

This marks the function as 'inline', which was surely the original
intention here.

Fixes: 1ebaa0b9c2d4 ("drm/i915: Move backlight registration to connector registration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127151239.1813673-1-arnd@arndb.de

drm/i915/fbdev: Serialise early hotplug events with async fbdev config

As both the hotplug event and fbdev configuration run asynchronously, it
is possible for them to run concurrently. If configuration fails, we were
freeing the fbdev causing a use-after-free in the hotplug event.

<7>[ 3069.935211] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
<7>[ 3069.935225] [drm:drm_setup_crtcs] looking for cmdline mode on connector 77
<7>[ 3069.935229] [drm:drm_setup_crtcs] looking for preferred mode on connector 77 0
<7>[ 3069.935233] [drm:drm_setup_crtcs] found mode 3200x1800
<7>[ 3069.935236] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
<7>[ 3069.935253] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 43 (0,0)
<7>[ 3069.935323] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
<4>[ 3069.967737] general protection fault: 0000 [#1] PREEMPT SMP
<0>[ 3069.977453] ---------------------------------
<4>[ 3069.977457] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mei_me mii prime_numbers mei i2c_hid pinctrl_geminilake pinctrl_intel [last unloaded: i915]
<4>[ 3069.977492] CPU: 1 PID: 15414 Comm: kworker/1:0 Tainted: G     U          4.14.0-CI-CI_DRM_3388+ #1
<4>[ 3069.977497] Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017
<4>[ 3069.977508] Workqueue: events output_poll_execute
<4>[ 3069.977512] task: ffff880177734e40 task.stack: ffffc90001fe4000
<4>[ 3069.977519] RIP: 0010:__lock_acquire+0x109/0x1b60
<4>[ 3069.977523] RSP: 0018:ffffc90001fe7bb0 EFLAGS: 00010002
<4>[ 3069.977526] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000282 RCX: 0000000000000000
<4>[ 3069.977530] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880170d4efd0
<4>[ 3069.977534] RBP: ffffc90001fe7c70 R08: 0000000000000001 R09: 0000000000000000
<4>[ 3069.977538] R10: 0000000000000000 R11: ffffffff81899609 R12: ffff880170d4efd0
<4>[ 3069.977542] R13: ffff880177734e40 R14: 0000000000000001 R15: 0000000000000000
<4>[ 3069.977547] FS:  0000000000000000(0000) GS:ffff88017fc80000(0000) knlGS:0000000000000000
<4>[ 3069.977551] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 3069.977555] CR2: 00007f7e8b7bcf04 CR3: 0000000003e0f000 CR4: 00000000003406e0
<4>[ 3069.977559] Call Trace:
<4>[ 3069.977565]  ? mark_held_locks+0x64/0x90
<4>[ 3069.977571]  ? _raw_spin_unlock_irq+0x24/0x50
<4>[ 3069.977575]  ? _raw_spin_unlock_irq+0x24/0x50
<4>[ 3069.977579]  ? trace_hardirqs_on_caller+0xde/0x1c0
<4>[ 3069.977583]  ? _raw_spin_unlock_irq+0x2f/0x50
<4>[ 3069.977588]  ? finish_task_switch+0xa5/0x210
<4>[ 3069.977592]  ? lock_acquire+0xaf/0x200
<4>[ 3069.977596]  lock_acquire+0xaf/0x200
<4>[ 3069.977600]  ? __mutex_lock+0x5e9/0x9b0
<4>[ 3069.977604]  _raw_spin_lock+0x2a/0x40
<4>[ 3069.977608]  ? __mutex_lock+0x5e9/0x9b0
<4>[ 3069.977612]  __mutex_lock+0x5e9/0x9b0
<4>[ 3069.977616]  ? drm_fb_helper_hotplug_event.part.19+0x16/0xa0
<4>[ 3069.977621]  ? drm_fb_helper_hotplug_event.part.19+0x16/0xa0
<4>[ 3069.977625]  drm_fb_helper_hotplug_event.part.19+0x16/0xa0
<4>[ 3069.977630]  output_poll_execute+0x8d/0x180
<4>[ 3069.977635]  process_one_work+0x22e/0x660
<4>[ 3069.977640]  worker_thread+0x48/0x3a0
<4>[ 3069.977644]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
<4>[ 3069.977649]  kthread+0x102/0x140
<4>[ 3069.977653]  ? process_one_work+0x660/0x660
<4>[ 3069.977657]  ? kthread_create_on_node+0x40/0x40
<4>[ 3069.977662]  ret_from_fork+0x27/0x40
<4>[ 3069.977666] Code: 8d 62 f8 c3 49 81 3c 24 e0 fa 3c 82 41 be 00 00 00 00 45 0f 45 f0 83 fe 01 77 86 89 f0 49 8b 44 c4 08 48 85 c0 0f 84 76 ff ff ff <f0> ff 80 38 01 00 00 8b 1d 62 f9 e8 01 45 8b 85 b8 08 00 00 85
<1>[ 3069.977707] RIP: __lock_acquire+0x109/0x1b60 RSP: ffffc90001fe7bb0
<4>[ 3069.977712] ---[ end trace 4ad012eb3af62df7 ]---

In order to keep the dev_priv->ifbdev alive after failure, we have to
avoid the free and leave it empty until we unload the module (which is
less than ideal, but a necessary evil for simplicity). Then we can use
intel_fbdev_sync() to serialise the hotplug event with the configuration.
The serialisation between the two was removed in commit 934458c2c95d
("Revert "drm/i915: Fix races on fbdev""), but the use after free is much
older, commit 366e39b4d2c5 ("drm/i915: Tear down fbdev if initialization
fails")

Fixes: 366e39b4d2c5 ("drm/i915: Tear down fbdev if initialization fails")
Fixes: 934458c2c95d ("Revert "drm/i915: Fix races on fbdev"")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125194155.355-1-chris@chris-wilson.co.uk

drm/i915/guc: Use consistent name for scratch register count

We should be consistent on naming of similar definitions.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124170239.29360-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/pmu: Aggregate all RC6 states into one counter

Chris has discovered that RC6, RC6p and RC6pp counters are mutually
exclusive, and even that on some SNB SKUs you get RC6p increasing, and on
the others RC6.

Furthermore RC6p and RC6pp were only present starting from GEN6 until,
GEN7, not including Haswell.

All this combined makes it questionable whether we need to reserve new ABI
for these counters. One idea was to just combine them all under the RC6
counter to simplify things for userspace. So that is what this patch does.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124171331.17981-1-tvrtko.ursulin@linux.intel.com

drm/i915: Use exponential backoff for wait_for()

Instead of sleeping for a fixed 1ms (roughly, depending on timer slack),
start with a small sleep and exponentially increase the sleep on each
cycle.

A good example of a beneficiary is the guc mmio communication channel.
Typically we expect (and so spin) for 10us for a quick response, but this
doesn't cover everything and so sometimes we fallback to the millisecond+
sleep. This incurs a significant delay in time-critical operations like
preemption (igt/gem_exec_latency), which can be improved significantly by
using a small sleep after the spin fails.

We've made this suggestion many times, but had little experimental data
to support adding the complexity.

v2: Bump the minimum usleep to 10us on advice of
Documentation/timers/timers-howto.txt (Tvrko)
v3: Specify min, max range for usleep intervals -- some code may
crucially depend upon and so want to specify the sleep pattern.

References: 1758b90e38f5 ("drm/i915: Use a hybrid scheme for fast register waits")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: John Harrison <John.C.Harrison@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124130031.20761-2-chris@chris-wilson.co.uk

drm/i915/guc: Tidy ELSP port assignment

Since we know that the port is empty, we do not need to extract the
count from the old request it and copy it over to the new request, or
attempt to unref the NULL old request pointer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124130031.20761-1-chris@chris-wilson.co.uk

drm/i915/guc: Advance over port[0] if set and not preempting

Our execlist emulation is intended to only use a maximum of 2 ports per
engine, so as to not overflow the wq. (By knowing the limits, we can
avoid having to handle the wq exhaustion.) However, upon adding
preemption, we lost the skip over the first port if set for the
non-preemption path. Restore it.

Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: c41937fd994a ("drm/i915/guc: Preemption! With GuC")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124133745.5173-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>

drm/i915: Prevent zero length "index" write

The hardware always writes one or two bytes in the index portion of
an indexed transfer. Make sure the message we send as the index
doesn't have a zero length.

Cc: stable@vger.kernel.org
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 56f9eac05489 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123194157.25367-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Don't try indexed reads to alternate slave addresses

We can only specify the one slave address to indexed reads/writes.
Make sure the messages we check are destined to the same slave
address before deciding to do an indexed transfer.

Cc: stable@vger.kernel.org
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 56f9eac05489 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123194157.25367-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/pmu: Stop averaging with the previous sample

Averaging with the previous sample brings a small statistical improvement
to sampling counters, but can leek a little bit of state from a current
client to the next which mulls the border between past and present for
observing clients.

This is because on event enable clients record the current counter value
and use it as reference, but with rapid off-on event cycles, and due the
delayed nature of sampling timer self-disarm, previous sample value does
not get cleared under these circumstances.

Solution is to stop averaging with the previous sample. This has a small
downside of losing some precision with short and spiky signals, but the
alternatives look too complicated for the benefit.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124094959.10725-1-tvrtko.ursulin@linux.intel.com

drm/i915: Select DEBUG_FS for our test suite

Ensure that we build our test kernels with DEBUG_FS enabled as many of
our igt tests require poking around debugfs/dri.

This should also fixup the kbuild complaint that we tried to select
SW_SYNC without meeting its dependencies.

Reported-by: kbuild-all@01.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012092147.28986-1-chris@chris-wilson.co.uk

drm/i915/guc: Rename i915_guc_reg.h to intel_guc_reg.h

We are using intel_ prefix for all file names with hardware
related definitions. GuC registers also fall into this category.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124095340.1500-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Update header guard name of intel_guc_submission.h

While renaming i915_guc_submission.h to intel_guc_submission.h, update of
header guard name to _INTEL_GUC_SUBMISSION_H_ was missed.

References: a269574489d4 (drm/i915/guc: Rename i915_guc_submission.c|h to intel_guc_submission.c|h)
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511511650-13756-1-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/pmu: Only allow running on a single CPU

We do two things, both of which are purely to simplify and clarify the
implementation:

1.

Simplify the CPU online callback so it is more obvious that the purpose
there is to set a single CPU mask bit for the first CPU which comes
online. Using cpumask_weight for this reads more obvious than the trick
with cpumask_and_any.

2.

Modify the event init so that events can be created only on a single CPU.

This removes looking at the requested CPU thread siblings, and only allows
creating on the current active CPU.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123123432.25035-2-tvrtko.ursulin@linux.intel.com

drm/i915/pmu: Remove conditional HOTPLUG_CPU registration

Even for static CPU configurations, the hotplug CPU framework is still
used to determine the CPU topology, and is still being used by the perf
event register to check for valid CPUs.

Fixes: b46a33e271ed ("drm/i915/pmu: Expose a PMU interface for perf queries")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123123432.25035-1-tvrtko.ursulin@linux.intel.com

drm/i915/selftests: Hold rpm wakeref for request + ggtt usage

Since the removal of the delayed rc6 enabling, we now setup and drop the
early rpm wakeref during modules initialisation before we start the live
selftests. As such, we are now detecting errors in the tests where we
were not holding the required wakeref for various actions. As rpm is not
the primary goal of the tests involved, take a coarse and convenient rpm
wakeref around the tests.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123233712.21836-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>

drm/i915/pmu: Hide the (unsigned long)ptr cast

We pretend the PMU config id is a pointer value when encoding it into
the device parameters for presentation via sysfs. This requires casting
of an unsigned long into and out of the pointer member, which annoys
smatch:

drivers/gpu/drm/i915/i915_pmu.c:684 i915_pmu_event_show() warn: argument 3 to %lx specifier is cast from pointer

Instead of abusing a generic dev_ext_attribute, define our own typesafe
attributes.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123211751.2885-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Move mi_set_context() into the legacy ringbuffer submission

The legacy i915_switch_context() is only applicable to the legacy
ringbuffer submission method, so move it from the general
i915_gem_context.c to intel_ringbuffer.c (rename pending!).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123152631.31385-2-chris@chris-wilson.co.uk

drm/i915: Unwind incomplete legacy context switches

The legacy context switch for ringbuffer submission is multistaged,
where each of those stages may fail. However, we were updating global
state after some stages, and so we had to force the incomplete request
to be submitted because we could not unwind. Save the global state
before performing the switches, and so enable us to unwind back to the
previous global state should any phase fail. We then must cancel the
request instead of submitting it should the construction fail.

v2: s/saved_ctx/from_ctx/; s/ctx/to_ctx/ etc.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123152631.31385-1-chris@chris-wilson.co.uk

drm/i915/selftests: test descending addresses

For igt_write_huge make sure the higher gtt offsets don't feel left out,
which is especially true when dealing with the 48b PPGTT, where we
timeout long before we are able exhaust the address space.

v2: just use IGT_TIMEOUT

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123135421.17967-2-matthew.auld@intel.com

drm/i915/selftests: rein in igt_write_huge

Rather than repeat the test for each engine, which takes a long time,
let's try alternating between the engines in some randomized
order.

v2: fix gen2 blunder
    fix !order blunder
    more cunning permutation construction!

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123135421.17967-1-matthew.auld@intel.com

drm/i915: remove stale comment from sanitize_encoder

This goes back to pre-atomic, where due to intermediate dpms states
connectors and encoder states might indeed not have matched.

With atomic that's all smashed together (and hopefully no bios ever
enables a vga output in dpms standby/suspedn state or we're toast).
In

commit 873ffe69a9097fb241fff2967ea6f0bf2c179195
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Wed Aug 5 12:37:07 2015 +0200

    drm/i915: Remove connectors_active from sanitization, v2.

sanitize_encoders was changed to disable the encoder in all cases,
which made the comment obsolete.

Remove the misleading comment.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121094241.9129-1-daniel.vetter@ffwll.ch

drm/i915: sync dp link status checks against atomic commmits

Two bits:
- check actual atomic state, the legacy stuff can only be looked at
  from within the atomic_commit_tail function, since it's only
  protected by ordering and not by any locks.

- Make sure we don't wreak the work an ongoing nonblocking commit is
  doing.

v2: We need the crtc lock too, because a plane update might change it
without having to acquire the connection_mutex (Maarten). Use
Maarten's changes for this locking, while keeping the logic that uses
the connection->commit->hw_done signal for syncing with nonblocking
commits.

v3: The initial state objects from the hw state readout do not have a
commit object. Check for that (spotted by CI).

v4: Fix deadlock from jumping to put_power with locks still held.
    (mlankhorst)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=103336
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99272
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113160140.22679-1-maarten.lankhorst@linux.intel.com

drm/i915/pmu: Clear the previous sample value when parking

When turning off the engines, and the pmu sampling, clear the previous
value as the current measurement should be 0.

v2: Use a for-loop
v3:
 * Move clearing to timer self-dis-arm to avoid race with parking.
 * Clear frequency samples as well.
v4:
 * Init frequency to idle_freq. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v3)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123102654.29296-1-tvrtko.ursulin@linux.intel.com

drm/i915/pmu: Drop I915_ENGINE_SAMPLE_MAX from uapi headers

We have agreed during the engine classes discussion that fields marked as
non-ABI are better left out altogether from uapi headers.

v2: Use a local define for maintanability. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123100701.18430-1-tvrtko.ursulin@linux.intel.com

drm/i915/dmc: DMC 1.04 for Kabylake

There is a new version of DMC available for KBL.

The release notes mentions:
1. Fix for the issue where DC_STATE was getting enabled even
when disabled by driver causing data corruption.

v2: Remove pull request from commit message (Rodrigo).

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510253503-12634-1-git-send-email-anusha.srivatsa@intel.com

drm/i915: Save/restore irq state for vlv_residency_raw()

Since commit 6060b6aec03c ("drm/i915/pmu: Add RC6 residency metrics"),
vlv_residency_raw() may be called from an irq-disabled context (via perf
event sampling on remote cpu). As such, we can no longer assume that we
are called from process context and must save/restore the irq state for
the spinlock.

Fixes: 6060b6aec03c ("drm/i915/pmu: Add RC6 residency metrics")
Testcase: igt/perf_pmu/other-init-3
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122222510.22627-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Call i915_gem_init_userptr() before taking struct_mutex

We don't need struct_mutex to initialise userptr (it just allocates a
workqueue for itself etc), but we do need struct_mutex later on in
i915_gem_init() in order to feed requests onto the HW.

This should break the chain

[  385.697902] ======================================================
[  385.697907] WARNING: possible circular locking dependency detected
[  385.697913] 4.14.0-CI-Patchwork_7234+ #1 Tainted: G     U
[  385.697917] ------------------------------------------------------
[  385.697922] perf_pmu/2631 is trying to acquire lock:
[  385.697927]  (&mm->mmap_sem){++++}, at: [<ffffffff811bfe1e>] __might_fault+0x3e/0x90
[  385.697941]
               but task is already holding lock:
[  385.697946]  (&cpuctx_mutex){+.+.}, at: [<ffffffff8116fe8c>] perf_event_ctx_lock_nested+0xbc/0x1d0
[  385.697957]
               which lock already depends on the new lock.

[  385.697963]
               the existing dependency chain (in reverse order) is:
[  385.697970]
               -> #4 (&cpuctx_mutex){+.+.}:
[  385.697980]        __mutex_lock+0x86/0x9b0
[  385.697985]        perf_event_init_cpu+0x5a/0x90
[  385.697991]        perf_event_init+0x178/0x1a4
[  385.697997]        start_kernel+0x27f/0x3f1
[  385.698003]        verify_cpu+0x0/0xfb
[  385.698006]
               -> #3 (pmus_lock){+.+.}:
[  385.698015]        __mutex_lock+0x86/0x9b0
[  385.698020]        perf_event_init_cpu+0x21/0x90
[  385.698025]        cpuhp_invoke_callback+0xca/0xc00
[  385.698030]        _cpu_up+0xa7/0x170
[  385.698035]        do_cpu_up+0x57/0x70
[  385.698039]        smp_init+0x62/0xa6
[  385.698044]        kernel_init_freeable+0x97/0x193
[  385.698050]        kernel_init+0xa/0x100
[  385.698055]        ret_from_fork+0x27/0x40
[  385.698058]
               -> #2 (cpu_hotplug_lock.rw_sem){++++}:
[  385.698068]        cpus_read_lock+0x39/0xa0
[  385.698073]        apply_workqueue_attrs+0x12/0x50
[  385.698078]        __alloc_workqueue_key+0x1d8/0x4d8
[  385.698134]        i915_gem_init_userptr+0x5f/0x80 [i915]
[  385.698176]        i915_gem_init+0x7c/0x390 [i915]
[  385.698213]        i915_driver_load+0x99e/0x15c0 [i915]
[  385.698250]        i915_pci_probe+0x33/0x90 [i915]
[  385.698256]        pci_device_probe+0xa1/0x130
[  385.698262]        driver_probe_device+0x293/0x440
[  385.698267]        __driver_attach+0xde/0xe0
[  385.698272]        bus_for_each_dev+0x5c/0x90
[  385.698277]        bus_add_driver+0x16d/0x260
[  385.698282]        driver_register+0x57/0xc0
[  385.698287]        do_one_initcall+0x3e/0x160
[  385.698292]        do_init_module+0x5b/0x1fa
[  385.698297]        load_module+0x2374/0x2dc0
[  385.698302]        SyS_finit_module+0xaa/0xe0
[  385.698307]        entry_SYSCALL_64_fastpath+0x1c/0xb1
[  385.698311]
               -> #1 (&dev->struct_mutex){+.+.}:
[  385.698320]        __mutex_lock+0x86/0x9b0
[  385.698361]        i915_mutex_lock_interruptible+0x4c/0x130 [i915]
[  385.698403]        i915_gem_fault+0x206/0x760 [i915]
[  385.698409]        __do_fault+0x1a/0x70
[  385.698413]        __handle_mm_fault+0x7c4/0xdb0
[  385.698417]        handle_mm_fault+0x154/0x300
[  385.698440]        __do_page_fault+0x2d6/0x570
[  385.698445]        page_fault+0x22/0x30
[  385.698449]
               -> #0 (&mm->mmap_sem){++++}:
[  385.698459]        lock_acquire+0xaf/0x200
[  385.698464]        __might_fault+0x68/0x90
[  385.698470]        _copy_to_user+0x1e/0x70
[  385.698475]        perf_read+0x1aa/0x290
[  385.698480]        __vfs_read+0x23/0x120
[  385.698484]        vfs_read+0xa3/0x150
[  385.698488]        SyS_read+0x45/0xb0
[  385.698493]        entry_SYSCALL_64_fastpath+0x1c/0xb1
[  385.698497]
               other info that might help us debug this:

[  385.698505] Chain exists of:
                 &mm->mmap_sem --> pmus_lock --> &cpuctx_mutex

[  385.698517]  Possible unsafe locking scenario:

[  385.698522]        CPU0                    CPU1
[  385.698526]        ----                    ----
[  385.698529]   lock(&cpuctx_mutex);
[  385.698553]                                lock(pmus_lock);
[  385.698558]                                lock(&cpuctx_mutex);
[  385.698564]   lock(&mm->mmap_sem);
[  385.698568]
                *** DEADLOCK ***

[  385.698574] 1 lock held by perf_pmu/2631:
[  385.698578]  #0:  (&cpuctx_mutex){+.+.}, at: [<ffffffff8116fe8c>] perf_event_ctx_lock_nested+0xbc/0x1d0
[  385.698589]
               stack backtrace:
[  385.698595] CPU: 3 PID: 2631 Comm: perf_pmu Tainted: G     U          4.14.0-CI-Patchwork_7234+ #1
[  385.698602] Hardware name:                  /NUC6CAYB, BIOS AYAPLCEL.86A.0040.2017.0619.1722 06/19/2017
[  385.698609] Call Trace:
[  385.698615]  dump_stack+0x5f/0x86
[  385.698621]  print_circular_bug.isra.18+0x1d0/0x2c0
[  385.698627]  __lock_acquire+0x19c3/0x1b60
[  385.698634]  ? generic_exec_single+0x77/0xe0
[  385.698640]  ? lock_acquire+0xaf/0x200
[  385.698644]  lock_acquire+0xaf/0x200
[  385.698650]  ? __might_fault+0x3e/0x90
[  385.698655]  __might_fault+0x68/0x90
[  385.698660]  ? __might_fault+0x3e/0x90
[  385.698665]  _copy_to_user+0x1e/0x70
[  385.698670]  perf_read+0x1aa/0x290
[  385.698675]  __vfs_read+0x23/0x120
[  385.698682]  ? __fget+0x101/0x1f0
[  385.698686]  vfs_read+0xa3/0x150
[  385.698691]  SyS_read+0x45/0xb0
[  385.698696]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[  385.698701] RIP: 0033:0x7ff1c46876ed
[  385.698705] RSP: 002b:00007fff13552f90 EFLAGS: 00000293 ORIG_RAX: 0000000000000000
[  385.698712] RAX: ffffffffffffffda RBX: ffffc90000647ff0 RCX: 00007ff1c46876ed
[  385.698718] RDX: 0000000000000010 RSI: 00007fff13552fa0 RDI: 0000000000000005
[  385.698723] RBP: 000056063d300580 R08: 0000000000000000 R09: 0000000000000060
[  385.698729] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000046
[  385.698734] R13: 00007fff13552c6f R14: 00007ff1c6279d00 R15: 00007ff1c6279a40

Testcase: igt/perf_pmu
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122172621.16158-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Remove success dmesg noise for intel_rotate_pages()

During selftesting intel_rotate_pages() is very, very verbose without
giving us any information. Suppress the noise.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122145646.1859-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/selftests: Use NOWARN for large allocations

We may try to do a large kmalloc for the permutation array, falling back
to a smaller array/test if the first allocation fails. Since we are
intentionally trying a large allocation which may fail, pass __GFP_NOWARN.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103842
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122120600.27025-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915/pmu: Add RC6 residency metrics

For clients like intel-gpu-overlay it is easier to read the
counters via the perf API than having to parse sysfs.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-9-tvrtko.ursulin@linux.intel.com

drm/i915: Convert intel_rc6_residency_us to ns

Will be used for exposing the PMU counters.

v2:
 * Move intel_runtime_pm_get/put to the callers. (Chris Wilson)
 * Restore full unit conversion precision.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-8-tvrtko.ursulin@linux.intel.com

drm/i915/pmu: Add interrupt count metric

For clients like intel-gpu-overlay it is easier to read the
count via the perf API than having to parse /proc.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-7-tvrtko.ursulin@linux.intel.com

drm/i915/pmu: Wire up engine busy stats to PMU

We can use engine busy stats instead of the sampling timer for
better accuracy.

By doing this we replace the stohastic sampling with busyness
metric derived directly from engine activity. This is context
switch interrupt driven, so as accurate as we can get from
software tracking.

As a secondary benefit, we can also not run the sampling timer
in cases only busyness metric is enabled.

v2: Rebase.
v3:
 * Rebase, comments.
 * Leave engine busyness controls out of workers.
v4: Checkpatch cleanup.
v5: Added comment to pmu_needs_timer change.
v6:
 * Rebase.
 * Fix style of some comments. (Chris Wilson)
v7: Rebase and commit message update. (Chris Wilson)
v8: Add delayed stats disabling to improve accuracy in face of
    CPU hotplug events.
v9: Rebase.
v10: Rebase - i915_modparams.enable_execlists removal.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-6-tvrtko.ursulin@linux.intel.com

drm/i915: Engine busy time tracking

Track total time requests have been executing on the hardware.

We add new kernel API to allow software tracking of time GPU
engines are spending executing requests.

Both per-engine and global API is added with the latter also
being exported for use by external users.

v2:
 * Squashed with the internal API.
 * Dropped static key.
 * Made per-engine.
 * Store time in monotonic ktime.

v3: Moved stats clearing to disable.

v4:
 * Comments.
 * Don't export the API just yet.

v5: Whitespace cleanup.

v6:
 * Rename ref to active.
 * Drop engine aggregate stats for now.
 * Account initial busy period after enabling stats.

v7:
 * Rebase.

v8:
 * Move context in notification after the notifier. (Chris Wilson)

v9:

In cases where stats tracking is getting disabled while there is
an active context on an engine, add up the current value to the
total. This also implies we don't clear the total when tracking
is disabled any longer. There is no real need to do so because
we define the stats as relative while enabled, meaning
comparison between two samples while tracking is enabled is the
valid usage. However, when busy stats will later be plugged into
the perf PMU API, it is beneficial to not reset the total, since
the PMU core likes to do some counter disable/enable cycles on
startup, and while doing so during a single long context
executing on an engine we would lose some accuracy and so make
unit testing more difficult than needs to be.

v10:
 * Fix accounting for preemption.

v11:
 * Rebase for i915_modparams.enable_execlists removal.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-5-tvrtko.ursulin@linux.intel.com

drm/i915: Wrap context schedule notification

No functional change just something which will be handy in the
following patch.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-4-tvrtko.ursulin@linux.intel.com

drm/i915/pmu: Suspend sampling when GPU is idle

If only a subset of events is enabled we can afford to suspend
the sampling timer when the GPU is idle and so save some cycles
and power.

v2: Rebase and limit timer even more.
v3: Rebase.
v4: Rebase.
v5: Skip action if perf PMU failed to register.
v6: Checkpatch cleanup.
v7:
 * Add a common helper to start the timer if needed. (Chris Wilson)
 * Add comment explaining bitwise logic in pmu_needs_timer.
v8: Fix some comments styles. (Chris Wilson)
v9: Rebase.
v10: Move function declarations to i915_pmu.h.
v11: Rename functions to i915_pmu_gt_(un)parked. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-3-tvrtko.ursulin@linux.intel.com

drm/i915/pmu: Expose a PMU interface for perf queries

From: Chris Wilson <chris@chris-wilson.co.uk>
From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
From: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>

The first goal is to be able to measure GPU (and invidual ring) busyness
without having to poll registers from userspace. (Which not only incurs
holding the forcewake lock indefinitely, perturbing the system, but also
runs the risk of hanging the machine.) As an alternative we can use the
perf event counter interface to sample the ring registers periodically
and send those results to userspace.

Functionality we are exporting to userspace is via the existing perf PMU
API and can be exercised via the existing tools. For example:

  perf stat -a -e i915/rcs0-busy/ -I 1000

Will print the render engine busynnes once per second. All the performance
counters can be enumerated (perf list) and have their unit of measure
correctly reported in sysfs.

v1-v2 (Chris Wilson):

v2: Use a common timer for the ring sampling.

v3: (Tvrtko Ursulin)
 * Decouple uAPI from i915 engine ids.
 * Complete uAPI defines.
 * Refactor some code to helpers for clarity.
 * Skip sampling disabled engines.
 * Expose counters in sysfs.
 * Pass in fake regs to avoid null ptr deref in perf core.
 * Convert to class/instance uAPI.
 * Use shared driver code for rc6 residency, power and frequency.

v4: (Dmitry Rogozhkin)
 * Register PMU with .task_ctx_nr=perf_invalid_context
 * Expose cpumask for the PMU with the single CPU in the mask
 * Properly support pmu->stop(): it should call pmu->read()
 * Properly support pmu->del(): it should call stop(event, PERF_EF_UPDATE)
 * Introduce refcounting of event subscriptions.
 * Make pmu.busy_stats a refcounter to avoid busy stats going away
   with some deleted event.
 * Expose cpumask for i915 PMU to avoid multiple events creation of
   the same type followed by counter aggregation by perf-stat.
 * Track CPUs getting online/offline to migrate perf context. If (likely)
   cpumask will initially set CPU0, CONFIG_BOOTPARAM_HOTPLUG_CPU0 will be
   needed to see effect of CPU status tracking.
 * End result is that only global events are supported and perf stat
   works correctly.
 * Deny perf driver level sampling - it is prohibited for uncore PMU.

v5: (Tvrtko Ursulin)

 * Don't hardcode number of engine samplers.
 * Rewrite event ref-counting for correctness and simplicity.
 * Store initial counter value when starting already enabled events
   to correctly report values to all listeners.
 * Fix RC6 residency readout.
 * Comments, GPL header.

v6:
 * Add missing entry to v4 changelog.
 * Fix accounting in CPU hotplug case by copying the approach from
   arch/x86/events/intel/cstate.c. (Dmitry Rogozhkin)

v7:
 * Log failure message only on failure.
 * Remove CPU hotplug notification state on unregister.

v8:
 * Fix error unwind on failed registration.
 * Checkpatch cleanup.

v9:
 * Drop the energy metric, it is available via intel_rapl_perf.
   (Ville Syrjälä)
 * Use HAS_RC6(p). (Chris Wilson)
 * Handle unsupported non-engine events. (Dmitry Rogozhkin)
 * Rebase for intel_rc6_residency_ns needing caller managed
   runtime pm.
 * Drop HAS_RC6 checks from the read callback since creating those
   events will be rejected at init time already.
 * Add counter units to sysfs so perf stat output is nicer.
 * Cleanup the attribute tables for brevity and readability.

v10:
 * Fixed queued accounting.

v11:
 * Move intel_engine_lookup_user to intel_engine_cs.c
 * Commit update. (Joonas Lahtinen)

v12:
 * More accurate sampling. (Chris Wilson)
 * Store and report frequency in MHz for better usability from
   perf stat.
 * Removed metrics: queued, interrupts, rc6 counters.
 * Sample engine busyness based on seqno difference only
   for less MMIO (and forcewake) on all platforms. (Chris Wilson)

v13:
 * Comment spelling, use mul_u32_u32 to work around potential GCC
   issue and somne code alignment changes. (Chris Wilson)

v14:
 * Rebase.

v15:
 * Rebase for RPS refactoring.

v16:
 * Use the dynamic slot in the CPU hotplug state machine so that we are
   free to setup our state as multi-instance. Previously we were re-using
   the CPUHP_AP_PERF_X86_UNCORE_ONLINE slot which is neither used as
   multi-instance, nor owned by our driver to start with.
 * Register the CPU hotplug handlers after the PMU, otherwise the callback
   will get called before the PMU is initialized which can end up in
   perf_pmu_migrate_context with an un-initialized base.
 * Added workaround for a probable bug in cpuhp core.

v17:
 * Remove workaround for the cpuhp bug.

v18:
 * Rebase for drm_i915_gem_engine_class getting upstream before us.

v19:
 * Rebase. (trivial)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-2-tvrtko.ursulin@linux.intel.com

drm/i915: Extract intel_get_cagf

Code to be shared between debugfs and the PMU implementation.

v2: Checkpatch cleanup.
v3: Also consolidate i915_sysfs.c/gt_act_freq_mhz_show.
v4: Rebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-1-tvrtko.ursulin@linux.intel.com

drm/i915/selftests: Avoid drm_gem_handle_create under struct_mutex

Despite us reloading the module around every selftest, the lockclasses
persist and the chains used in selftesting may then dictate how we are
allowed to nest locks during runtime testing. As such we have to be just
as careful, and in particular it turns out we are not allowed to nest
dev->object_name_lock (drm_gem_handle_create) inside dev->struct_mutex.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103830
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121110652.1107-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Add rudimentary plane state verification

Check that the planes are in the state we expect them to be. For
now we can only check whether each plane is correctly enabled or
disabled. In the future we may want to expand the plane state
readout to support a more thorough verification.

v2: Verify all planes part of the state as long as at least
    one crtc is doing a modeset (Daniel)
v3: Fix typoes (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-11-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Use plane->get_hw_state() for initial plane fb readout

Since we now have a ->get_hw_state() method for planes, let's use
that during the initial plane fb readout.

v2: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-10-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Nuke crtc->plane

Eliminate crtc->plane since it's pretty much a layering violation.
We can always get the plane via crtc->primary if we actually need it.

The only ugly thing left is plane_to_crtc_mapping[], but that's
still needed by the pre-g4x watermark code.

v2: Removed a misplaced comment change (Daniel)
v3: Rebase due to fbc crtc->y usage removal
v4: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-9-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Switch fbc over to for_each_new_intel_plane_in_state()

Stop using the old for_each_intel_plane_in_state() type iteration
macro and replace it with for_each_new_intel_plane_in_state().
And similarly replace drm_atomic_get_existing_crtc_state() with
intel_atomic_get_new_crtc_state(). Switch over to intel_ types
as well to make the code less cluttered.

v2: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-8-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Nuke ironlake_get_initial_plane_config()

The only relevant difference between i9xx_get_initial_plane_config() and
ironlake_get_initial_plane_config() is the HSW/BDW TILEOFF handling.
Add that to i9xx_get_initial_plane_config() and nuke
ironlake_get_initial_plane_config().

v2: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-7-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Cleanup enum pipe/enum plane_id/enum i9xx_plane_id in initial fb readout

Use enum pipe, enum plane_id, and enum i9xx_plane_id consistently in the
initial framebuffe readout.

v2: Use old_plane_id in the ilk code
v3: s/old_plane_id/i9xx_plane_id/ (Daniel)
v4: Rebase due to GLK/CNL PLANE_COLOR_CTL alpha stuff
v5: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-6-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Use enum i9xx_plane_id for the .get_fifo_size() hooks

Replace the 0 and 1 with PLANE_A and PLANE_B in the pre-g4x wm code.

v2: s/old_plane_id/i9xx_plane_id/ (Daniel)
v3: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-5-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: s/enum plane/enum i9xx_plane_id/

Rename enum plane to enum i9xx_plane_id to make it clear that it only
applies to pre-SKL platforms.

enum i9xx_plane_id is a global identifier, whereas enum plane_id is
per-pipe. We need the old global identifier to index the primary plane
(and the pre-g4x sprite C if we ever expose it) registers on pre-SKL
platforms.

v2: Reorder patches
v3: s/old_plane_id/i9xx_plane_id/ (Daniel)
    Pimp the commit message a bit
    Note that i9xx_plane_id doesn't apply to SKL+
v4: Rebase due to power domain handling in plane readout
v5: Rebase due to crtc->dspaddr_offset removal
v6: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-4-ville.syrjala@linux.intel.com
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Redo plane sanitation during readout

Unify the plane disabling during state readout by pulling the code into
a new helper intel_plane_disable_noatomic(). We'll also read out the
state of all planes, so that we know which planes really need to be
diabled.

Additonally we change the plane<->pipe mapping sanitation to work by
simply disabling the offending planes instead of entire pipes. And
we do it before we otherwise sanitize the crtcs, which means we don't
have to worry about misassigned planes during crtc sanitation anymore.

v2: Reoder patches to not depend on enum old_plane_id
v3: s/for_each_pipe/for_each_intel_crtc/

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alex Villacís Lasso <alexvillacislasso@hotmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103223
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-3-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Add .get_hw_state() method for planes

Add a .get_hw_state() method for planes, returning true or false
depending on whether the plane is enabled. Use it to rewrite the
plane enabled/disabled asserts in platform agnostic fashion.

We do lose the pre-gen4 plane<->pipe mapping checks, but since we're
supposed sanitize that anyway it doesn't really matter.

v2: Reoder patches to not depend on enum old_plane_id
    Just call assert_plane_disabled() from assert_planes_disabled()
v3: Deal with disabled power wells in .get_hw_state()
v4: Rebase due skl primary plane code removal

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alex Villacís Lasso <alexvillacislasso@hotmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2
Tested-by: Thierry Reding <thierry.reding@gmail.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-2-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Don't use GEN6_RC_VIDEO_FREQ on gen10+

GEN6_RC_VIDEO_FREQ is deprecated for >= gen10;
don't try to program it.

v2: Use IS_GEN9() instead of INTEL_GEN() and remove comment (Rodrigo)

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117080146.20150-1-david.weinehall@linux.intel.com

drm/i915/selftests: Declare we allocated the guc clients

Silence smatch over

drivers/gpu/drm/i915/selftests/intel_guc.c:135 igt_guc_init_doorbell_hw() error: we previously assumed 'guc->execbuf_client' could be null (see line 123)
drivers/gpu/drm/i915/selftests/intel_guc.c:142 igt_guc_init_doorbell_hw() error: we previously assumed 'guc->preempt_client' could be null (see line 123)

by asserting that we did succeed in creating the pair of clients for
testing.

References: 55bd6bd75717 ("drm/i915/selftests: Add a GuC doorbells selftest")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120211907.1649-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>

drm/i915: Remove i915.semaphores modparam

Having disabled the broken semaphores on Sandybridge, there is no need
for a modparam any more, so remove it in favour of a simple
HAS_LEGACY_SEMAPHORES() guard.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-5-chris@chris-wilson.co.uk

drm/i915: Move debugfs/i915_semaphore_status to i915_engine_info

As the semaphores is just part of the engine, include it with the
general pretty printer universally used for debugging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-4-chris@chris-wilson.co.uk

drm/i915: Disable semaphores on Sandybridge

I should have admitted defeat long ago as there has been a rare but
persistent error on Sandybridge where semaphore signaling did not
propagate to the waiter, leading to a GPU hang.

With the work on fence signaling for v4.9, the impact of using CPU driven
signaling was greatly reduced wrt to the latency of GPU semaphores,
though without logical rings support, the benefit of reordering work to
avoid bubbles is not realised (i.e. as it stands fence signaling is just
a slower, more costly version of HW semaphores; but works more
consistently). As a rough indicator of the difference,

with semaphores:
Sequential (3 engines, 1 processes): average 5.470us per cycle [expected 4.988us]
w/o semaphores:
Sequential (3 engines, 1 processes): average 15.771us per cycle [expected 4.923us]

In comparison, v3.4:
with semaphores:
Sequential (3 engines, 1 processes): average 16.066us per cycle [expected 11.842us]
w/o semaphores:
Sequential (3 engines, 1 processes): average 23.460us per cycle [expected 11.839us]

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54226 #and 100+ dupes
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-3-chris@chris-wilson.co.uk

drm/i915: Remove obsolete ringbuffer emission for gen8+

Since removing the module parameter to force selection of ringbuffer
emission for gen8, the code is defunct. Remove it.

To put the difference into perspective, a couple of microbenchmarks
(bdw i7-5557u, 20170324):
                                        ring          execlists
exec continuous nops on all rings:   1.491us            2.223us
exec sequential nops on each ring:  12.508us           53.682us
single nop + sync:                   9.272us           30.291us

vblank_mode=0 glxgears:            ~11000fps           ~9000fps

Since the earlier submission, gen8 ringbuffer submission has fallen
further and further behind in features. So while ringbuffer may hold the
throughput crown, in terms of interactive latency, execlists is much
better. Alas, we have no convenient metrics for such, other than
demonstrating things we can do with execlists but can not using
legacy ringbuffer submission.

We have made a few improvements to lowlevel execlists throughput,
and ringbuffer currently panics on boot! (bdw i7-5557u, 20171026):

                                        ring          execlists
exec continuous nops on all rings:       n/a            1.921us
exec sequential nops on each ring:       n/a           44.621us
single nop + sync:                       n/a           21.953us

vblank_mode=0 glxgears:                  n/a          ~18500fps

References: https://bugs.freedesktop.org/show_bug.cgi?id=87725
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Once-upon-a-time-Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-2-chris@chris-wilson.co.uk

drm/i915: Remove i915.enable_execlists module parameter

Execlists and legacy ringbuffer submission are no longer feature
comparable (execlists now offer greater functionality that should
overcome their performance hit) and obsoletes the unsafe module
parameter, i.e. comparing the two modes of execution is no longer
useful, so remove the debug tool.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #i915_perf.c
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-1-chris@chris-wilson.co.uk

drm/i915/execlists: Delay writing to ELSP until HW has processed the previous write

The hardware needs some time to process the information received in the
ExecList Submission Port, and expects us to not write anything more until
it has 'acknowledged' this new submission by sending an IDLE_ACTIVE or
PREEMPTED CSB event.

If we do not follow this, the driver could write new data into the ELSP
before HW had finishing fetching the previous one, putting us in
'undefined behaviour' space.

This seems to be the problem causing the spurious PREEMPTED & COMPLETE
events after a COMPLETE like the one below:

[] vcs0: sw rd pointer = 2, hw wr pointer = 0, current 'head' = 3.
[] vcs0:  Execlist CSB[0]: 0x00000018 _ 0x00000007
[] vcs0:  Execlist CSB[1]: 0x00000001 _ 0x00000000
[] vcs0:  Execlist CSB[2]: 0x00000018 _ 0x00000007  <<< COMPLETE
[] vcs0:  Execlist CSB[3]: 0x00000012 _ 0x00000007  <<< PREEMPTED & COMPLETE
[] vcs0:  Execlist CSB[4]: 0x00008002 _ 0x00000006
[] vcs0:  Execlist CSB[5]: 0x00000014 _ 0x00000006

The ELSP writes that lead to this CSB sequence show that the HW hadn't
started executing the previous execlist (the one with only ctx 0x6) by the
time the new one was submitted; this is a bit more clear in the data
show in the EXECLIST_STATUS register at the time of the ELSP write.

[] vcs0: ELSP[0] = 0x0_0        [execlist1] - status_reg = 0x0_302
[] vcs0: ELSP[1] = 0x6_fedb2119 [execlist0] - status_reg = 0x0_8302

[] vcs0: ELSP[2] = 0x7_fedaf119 [execlist1] - status_reg = 0x0_8308
[] vcs0: ELSP[3] = 0x6_fedb2119 [execlist0] - status_reg = 0x7_8308

Note that having to wait for this ack does not disable lite-restores,
although it may reduce their numbers.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102035
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/<20171118003038.7935-1-michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120123458.23242-4-chris@chris-wilson.co.uk
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/selftest: Make guc clients static

Make the private array used for stashing test clients static, to silence
sparse.

References: 55bd6bd75717 ("drm/i915/selftests: Add a GuC doorbells selftest")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120132606.4254-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>

drm/i915/perf: reuse timestamp frequency from device info

Now that we have this stored in the device info, we can drop it from perf
part of the driver.

Note that this requires to init perf after we've computed the frequency,
hence why we move i915_perf_init() from i915_driver_init_early() to after
intel_device_info_runtime_init().

v2: Use div_u64 (Chris)

v3: Drop u64 divs by switching to kHz (Chris/Ville)
    Move i915_perf_fini to i915_driver_cleanup_hw (Matthew)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113181902.12411-2-lionel.g.landwerlin@intel.com

drm/i915: Automatic i915_switch_context for legacy

During request construction, after pinning the context we know whether
or not we have to emit a context switch. So move this common operation
from every caller into i915_gem_request_alloc() itself.

v2: Always submit the request if we emitted some commands during request
construction, as typically it also involves changes in global state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120102002.22254-2-chris@chris-wilson.co.uk

drm/i915: Pull the unconditional GPU cache invalidation into request construction

As the request will, in the following patch, implicitly invoke a
context-switch on construction, we should precede that with a GPU TLB
invalidation. Also, even before using GGTT, we always want to invalidate
the TLBs for any updates (as well as the ppgtt invalidates that are
unconditionally applied by execbuf). Since we almost always require the
TLB invalidate, do it unconditionally on request allocation and so we can
remove it from all other paths.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120102002.22254-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915/perf: replace .reg accesses with i915_mmio_reg_offset

This replaces accesses to the reg field of the i915_reg_t structure
with the i915_mmio_reg_offset() inline function.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ewelina Musial <ewelina.musial@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113233455.12085-2-lionel.g.landwerlin@intel.com

drm/i915/execlists: Assert that we don't get mixed IDLE_ACTIVE | COMPLETE events

If IDLE_ACTIVE is set, then all other bits are invalid. For us, we can
assert that if we see a COMPLETE | PREEMPTED event, then it should be
impossible for it to also contain an IDLE_ACTIVE flag.

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120123458.23242-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/execlists: Reduce completed event mask to COMPLETE | PREEMPTED

Since we get a COMPLETE event when the context switch occurs on
RING_HEAD == RING_TAIL and a PREEMPTED event when a switch occurs
before that point, COMPLETE | PREEMPTED should cover all possible context
switch completion events. We can move the ELEMENT_SWITCH info message
from the COMPLETED_MASK into an assertion for when we are performing a
switch to port[1].

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120123458.23242-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/execlists: Listen to COMPLETE context event not ACTIVE_IDLE

Since commit e1fee72c2ea2e9c0c6e6743d32a6832f21337d6c
Author: Oscar Mateo <oscar.mateo@intel.com>
Date:   Thu Jul 24 17:04:40 2014 +0100

    drm/i915/bdw: Avoid non-lite-restore preemptions

execlists has listened to (ACTIVE_IDLE | ELEMENT_SWITCH) for detecting
when one context completed and it either continued onto the next (in port
1) or idled. We would always see COMPLETE | ACTIVE_IDLE on the final
context-switch event, but on recent gen it appears that we now get
separate ACTIVE_IDLE and COMPLETE events. In particular, the ACTIVE_IDLE
events may not be coupled to a context (since it is a general state rather
than a specific context completion event).

v2: Update the history, execlists did originally start out by listening
to the COMPLETE event not ACTIVE_IDLE.
v3: Update preempt completion test to also use COMPLETE not ACTIVE_IDLE.

References: bspec/12255
References: https://bugs.freedesktop.org/show_bug.cgi?id=103800
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120123458.23242-1-chris@chris-wilson.co.uk

drm/i915: Fix init_clock_gating for resume

Moving the init_clock_gating() call from intel_modeset_init_hw() to
intel_modeset_gem_init() had an unintended effect of not applying
some workarounds on resume. This, for example, cause some kind of
corruption to appear at the top of my IVB Thinkpad X1 Carbon LVDS
screen after hibernation. Fix the problem by explicitly calling
init_clock_gating() from the resume path.

I really hope this doesn't break something else again. At least
the problems reported at https://bugs.freedesktop.org/show_bug.cgi?id=103549
didn't make a comeback, even after a hibernate cycle.

v2: Reorder the init_clock_gating vs. modeset_init_hw to match
    the display reset path (Rodrigo)

Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 6ac43272768c ("drm/i915: Move init_clock_gating() back to where it was")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116160215.25715-1-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Update DRIVER_DATE to 20171117

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Add a policy note for removing workarounds

Rodrigo gave a persuasive argument for keeping workarounds: that they
serve as a good guide for the bring up of the next generation. Not only
do workarounds persist into the early revisions, they show where the
workarounds were previously added to the code flow and sometimes the old
workarounds have an explanation that give insight into their wider
implications.

Based on his suggestion, document the policy that we want to keep the
workarounds from the current generation to guide the next. Older
preproduction workarounds we still want to remove to keep the code
clean.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117102635.8689-1-chris@chris-wilson.co.uk
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/selftests: Report ENOMEM clearly for an allocation failure

If we can not run the drunk_hole test because we couldn't allocate the
memory for the permutation array (even after we tried trimming the
size), report a clear ENOMEM. Similary, if we are asked to operate on a
hole too small for ourselves, make it skip quietly.

v2: Avoid malloc(0) since that returns ZERO_SIZE_PTR not NULL.
v3: Fixup similar construction for lowlevel_hole
v4: Use u64 >> 1 to avoid 64b div.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117101732.4335-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117162945.16390-1-chris@chris-wilson.co.uk

Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"

This reverts commit 8f067837c4b713ce2e69be95af7b2a5eb3bd7de8.

HSD says "WA withdrawn. It was causing corruption with some images.
WA is not strictly necessary since this bug just causes loss of FBC
compression with some sizes and images, but doesn't break anything."

Fixes: 8f067837c4b7 ("drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117010825.23118-1-radhakrishna.sripada@intel.com

drm/i915: Calculate g4x intermediate watermarks correctly

The watermarks it should calculate against are the old optimal watermarks.
The currently active crtc watermarks are pure fiction, and are invalid in
case of a nonblocking modeset, page flip enabling/disabling planes or any
other reason.

When the crtc is disabled or during a modeset the intermediate watermarks
don't need to be programmed separately, and could be directly assigned
to the optimal watermarks.

CXSR must always be disabled in the intermediate case for modesets,
else we get a WARN for vblank wait timeout.

Also rename crtc_state to new_crtc_state, to distinguish it from the old
state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115163157.14372-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3.

The watermarks it should calculate against are the old optimal watermarks.
The currently active crtc watermarks are pure fiction, and are invalid in
case of a nonblocking modeset, page flip enabling/disabling planes or any
other reason.

When the crtc is disabled or during a modeset the intermediate watermarks
don't need to be programmed separately, and could be directly assigned
to the optimal watermarks.

CXSR must always be disabled in the intermediate case for modesets, else
we get a WARN for vblank wait timeout.

Also rename crtc_state to new_crtc_state, to distinguish it from the old state.

Changes since v1:
- Use intel_atomic_get_old_crtc_state. (ville)
Changes since v2:
- Always unset cxsr during modeset.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115163157.14372-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Pass crtc_state to ips toggle functions, v2

Changes since v1:
- Only pass crtc_state, not crtc.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110113503.16253-8-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Pass idle crtc_state to intel_dp_sink_crc

IPS can only be enabled if the primary plane is visible, so
first make sure sw state matches hw state by waiting for hw_done.

After this pass crtc_state to intel_dp_sink_crc() so that can be used,
instead of using legacy pointers.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110113503.16253-7-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Enable FIFO underrun reporting after initial fastset, v4.

The firmware may have set up the pipe correctly, but the FIFO
underrun and CRC interrupts are likely not enabled.

This resulted in debugfs_test.read_all_entries failing on haswell,
because of a timeout when reading the crc debugfs entry.

Solve this by enabling FIFO underrun reporting after the initial
fastset, which lets interrupts be generated as expected.

Changes since v1:
- Always enable CPU FIFO underrun reporting for >GEN2,
  and handle GEN2 correctly.
Changes since v2:
- Remove unneeded HAS_DDI, simplify GEN2 case.
Changes since v3:
- Use intel_crtc_pch_transcoder to determine pch transcoder for underruns. (Ville)
- Remove crtc->config dereference in intel_crtc_pch_transcoder. (Ville)

Testcase: debugfs_test.read_all_entries
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113144043.58658-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM

Commit  21cc6431e0c2 ("drm/i915: Mark the userptr invalidate workqueue
as WQ_MEM_RECLAIM") tried to fixup the check_flush_dependency warning
for hitting i915_gem_userptr_mn_invalidate_range_start from within the
shrinker, but I failed to notice userptr has 2 similarly named
workqueues. I marked up i915-userptr-acquire as WQ_MEM_RECLAIM whereas
we only wait upon i915-userptr-release from inside the reclaim paths.

[62530.869510] workqueue: PF_MEMALLOC task 7983(gem_shrink) is flushing !WQ_MEM_RECLAIM i915-userptr-release:          (null)
[62530.869515] ------------[ cut here ]------------
[62530.869519] WARNING: CPU: 1 PID: 7983 at kernel/workqueue.c:2434 check_flush_dependency+0x7f/0x110
[62530.869519] Modules linked in: pegasus mii ip6table_filter ip6_tables bnep iptable_filter snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic binfmt_misc nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hda_core snd_hwdep kvm snd_pcm irqbypass snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul crc32_pclmul 8250_dw ghash_clmulni_intel snd_seq pcbc snd_seq_device snd_timer btusb aesni_intel btrtl btbcm aes_x86_64 iwlwifi btintel crypto_simd glue_helper cryptd bluetooth snd intel_cstate input_leds idma64 intel_rapl_perf ecdh_generic serio_raw soundcore cfg80211 wmi_bmof virt_dma intel_lpss_pci intel_lpss acpi_als kfifo_buf industrialio winbond_cir soc_button_array rc_core spidev tpm_crb intel_hid acpi_pad mac_hid sparse_keymap
[62530.869546]  parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid i915 i2c_algo_bit prime_numbers drm_kms_helper syscopyarea e1000e sysfillrect sysimgblt fb_sys_fops ahci ptp pps_core libahci drm wmi video i2c_hid hid
[62530.869557] CPU: 1 PID: 7983 Comm: gem_shrink Tainted: G     U  W    L  4.14.0-rc8-drm-tip-ww45-commit-1342299+ #1
[62530.869558] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X098.A00.1707301945 07/30/2017
[62530.869559] task: ffffa1049dbeec80 task.stack: ffffae7d05c44000
[62530.869560] RIP: 0010:check_flush_dependency+0x7f/0x110
[62530.869561] RSP: 0018:ffffae7d05c473a0 EFLAGS: 00010286
[62530.869562] RAX: 000000000000006e RBX: ffffa1049540f400 RCX: ffffffffa3e55788
[62530.869562] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000202
[62530.869563] RBP: ffffae7d05c473c0 R08: 000000000000006e R09: 000000000038bb0e
[62530.869563] R10: 0000000000000000 R11: 000000000000006e R12: ffffa1049dbeec80
[62530.869564] R13: 0000000000000000 R14: 0000000000000000 R15: ffffae7d05c473e0
[62530.869565] FS:  00007f621b129880(0000) GS:ffffa1050b240000(0000) knlGS:0000000000000000
[62530.869566] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[62530.869566] CR2: 00007f6214400000 CR3: 0000000353a17003 CR4: 00000000003606e0
[62530.869567] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[62530.869567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[62530.869568] Call Trace:
[62530.869570]  flush_workqueue+0x115/0x3d0
[62530.869573]  ? wake_up_process+0x15/0x20
[62530.869596]  i915_gem_userptr_mn_invalidate_range_start+0x12f/0x160 [i915]
[62530.869614]  ? i915_gem_userptr_mn_invalidate_range_start+0x12f/0x160 [i915]
[62530.869616]  __mmu_notifier_invalidate_range_start+0x55/0x80
[62530.869618]  try_to_unmap_one+0x791/0x8b0
[62530.869620]  ? call_rwsem_down_read_failed+0x18/0x30
[62530.869622]  rmap_walk_anon+0x10b/0x260
[62530.869624]  rmap_walk+0x48/0x60
[62530.869625]  try_to_unmap+0x93/0xf0
[62530.869626]  ? page_remove_rmap+0x2a0/0x2a0
[62530.869627]  ? page_not_mapped+0x20/0x20
[62530.869629]  ? page_get_anon_vma+0x90/0x90
[62530.869630]  ? invalid_mkclean_vma+0x20/0x20
[62530.869631]  migrate_pages+0x946/0xaa0
[62530.869633]  ? __ClearPageMovable+0x10/0x10
[62530.869635]  ? isolate_freepages_block+0x3c0/0x3c0
[62530.869636]  compact_zone+0x22f/0x970
[62530.869638]  compact_zone_order+0xa3/0xd0
[62530.869640]  try_to_compact_pages+0x1a5/0x2a0
[62530.869641]  ? try_to_compact_pages+0x1a5/0x2a0
[62530.869643]  __alloc_pages_direct_compact+0x50/0x110
[62530.869644]  __alloc_pages_slowpath+0x4da/0xf30
[62530.869646]  __alloc_pages_nodemask+0x262/0x280
[62530.869648]  alloc_pages_vma+0x165/0x1e0
[62530.869649]  shmem_alloc_hugepage+0xd0/0x130
[62530.869651]  ? __radix_tree_insert+0x45/0x230
[62530.869652]  ? __vm_enough_memory+0x29/0x130
[62530.869654]  shmem_alloc_and_acct_page+0x10d/0x1e0
[62530.869655]  shmem_getpage_gfp+0x426/0xc00
[62530.869657]  shmem_fault+0xa0/0x1e0
[62530.869659]  ? file_update_time+0x60/0x110
[62530.869660]  __do_fault+0x1e/0xc0
[62530.869661]  __handle_mm_fault+0xa35/0x1170
[62530.869662]  handle_mm_fault+0xcc/0x1c0
[62530.869664]  __do_page_fault+0x262/0x4f0
[62530.869666]  do_page_fault+0x2e/0xe0
[62530.869667]  page_fault+0x22/0x30
[62530.869668] RIP: 0033:0x404335
[62530.869669] RSP: 002b:00007fff7829e420 EFLAGS: 00010216
[62530.869670] RAX: 00007f6210400000 RBX: 0000000000000004 RCX: 0000000000b80000
[62530.869670] RDX: 0000000000002e01 RSI: 0000000000008000 RDI: 0000000000000004
[62530.869671] RBP: 0000000000000019 R08: 0000000000000002 R09: 0000000000000000
[62530.869671] R10: 0000000000000559 R11: 0000000000000246 R12: 0000000008000000
[62530.869672] R13: 00000000004042f0 R14: 0000000000000004 R15: 000000000000007e
[62530.869673] Code: 00 8b b0 18 05 00 00 48 8d 8b b0 00 00 00 48 8d 90 c0 06 00 00 4d 89 f0 48 c7 c7 40 c0 c8 a3 c6 05 68 c5 e8 00 01 e8 c2 68 04 00 <0f> ff 4d 85 ed 74 18 49 8b 45 20 48 8b 70 08 8b 86 00 01 00 00
[62530.869691] ---[ end trace 01e01ad0ff5781f8 ]---

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103739
Fixes: 21cc6431e0c2 ("drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114173520.8829-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Add might_sleep() check to wait_for()

We should long past the time of trying to use wait_for() from inside
atomic contexts, so add a might_sleep() check to prevent misuse.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114215655.4849-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/selftests: Add a GuC doorbells selftest

The first test aims to check guc_init_doorbell_hw, changing the existing
guc clients and doorbells state before calling it.

The second test tries to create as many clients as it is currently possible
(currently limited to max number of doorbells) and exercise the doorbell
alloc/dealloc code.

Since our usage mode require very few clients/doorbells, this code has
been exercised very lightly and it's good to have a simple test for it.

As reference, this test already helped identify the bug fixed by
commit 7f1ea2ac3017 ("drm/i915/guc: Fix doorbell id selection").

v2: Extend number of clients; check for client allocation failure when
number of doorbells is exceeded; validate client properties; reuse
guc_init_doorbell_hw (Chris).

v3: guc_init_doorbell_hw test added per Chris suggestion.

v4: Try to explain why guc_init_doorbell_hw exist and comment some
details in the subtest.

v5: Remove redundant pr_info at the beginning of each subtest (Chris);
rebase (s/i915_guc_client/intel_guc_client/).

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116220632.1909-1-michel.thierry@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Merge tag 'gvt-next-2017-11-16' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2017-11-16

- CSB HWSP update support (Weinan)
- GVT debug helpers, dyndbg and debugfs (Chuanxiao, Shuo)
- full virtualized opregion (Xiaolin)
- VM health check for sane fallback (Fred)
- workload submission code refactor for future enabling (Zhi)
- Updated repo URL in MAINTAINERS (Zhenyu)
- other many misc fixes

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116092007.ww5bvfx7rf36bjmn@zhen-hp.sh.intel.com

drm/i915/cnl: Extend HDMI 2.0 support to CNL.

Starting on GLK we support HDMI 2.0. So this patch only
extend the work Shashank has made to GLK to CNL.

v2: The version that compiles :/
v3: Invert order to newer || older platforms check. (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115184205.8104-1-rodrigo.vivi@intel.com

drm/i915/cnl: Simplify dco_fraction calculation.

I confess I never fully understood that previous calculation,
so this is not a "fix". But let's simplify this math
so poor brains like mine can read and make some sense of
it in the future.

v2: Don't follow the spec since that gives invalid
    values and it is also confusing. This Ville's
    version is much simpler.
v3: Use u64 cast instead of declaring a u64 dco. (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115184257.8633-1-rodrigo.vivi@intel.com

drm/i915/cnl: Don't blindly replace qdiv.

Accordingly to spec "If Kdiv != 2, then Qdiv must be 1."
but we already handle qdiv values properly and this case here
should be spurious. But instead of blindly replacing let's
warn loudly instead. Because it means something was really
wrong on initial setup.

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-6-rodrigo.vivi@intel.com

drm/i915/cnl: Fix wrpll math for higher freqs.

Spec describe all values in MHz. We handle our
clocks in KHz. This includes the best_dco_centrality that was
forgot in the same unity as spec. Consequently we couldn't
get a good divider for high frequenies. Hence HDMI 2.0 wasn't
working.

Spec tells 999999 for initial best_dco_centrality meaning the
max value in MHz.
Since we convert dco from MHz to KHz we also need to convert
this initial best_doc_centrality to 999999000 or 999999999
or even better, to the max that its variable allow.

This patch also replaces the use of "* KHz(1)" with the values
directly on KHz to avoid future confusion.

v2: Use U32_MAX instead of random 99999 as spec tells. (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114234223.10600-1-rodrigo.vivi@intel.com

drm/i915/cnl: Fix, simplify and unify wrpll variable sizes.

- 64 bits is not needed for afe_clock now we don't convert
  that to Hz.
- 16 bits is not enough for all dco stuff.
- unsigned is not relevant/needed for all divisors values.

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-4-rodrigo.vivi@intel.com

drm/i915/cnl: Remove useless conversion.

No functional change. Just starting the wrpll fixes
with a clean-up to make units a bit more clear.

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-3-rodrigo.vivi@intel.com

drm/i915/cnl: Remove spurious central_freq.

"Display software must leave this field at the default value.
It no longer needs to be configured as part of PLL programming."

We respect this already and we are setting up the default
one line below: "DPLL_CFGCR1_CENTRAL_FREQ".

Also we don't touch anywhere else this central_freq for cnl.
So let's remove from the final write.

No functional change. Only a clean-up patch.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-2-rodrigo.vivi@intel.com

drm/i915/selftests: exercise_ggtt may have nothing to do

When operating on the live_ggtt we have to find a usuable hole for our
test. It is possible for there to be no hole we can use, so initialise
the err to 0 for the early exit.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115152558.31252-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Don't sanitize frame start delay if the pipe is off

Avoid touching PIPECONF in intel_sanitize_crtc() unless the pipe is
actually on. Should cure some unclaimed register accesses during reset,
as we are rather cavalier in our approach to powerdomain management.

We don't have to sanitize this if the pipe is off since we will
overwrite the frame start delay anyway when turning the pipe on.

v2: Amended commit message to implicate the reset path (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102249
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115200442.15051-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Rename i915_guc_submission.c|h to intel_guc_submission.c|h

With all component structures and functions named appropriately, change
the names of GuC submission source files. There were bunch of style issues
in guc_submission.c that are highlighted now by checkpatch. Fix those.
Update name in Documentation/gpu. (Joonas)

v2: Rebase.

v3: Rebase.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-6-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Rename i915_guc_client struct to intel_guc_client

GuC submission clients are currently being used in kernel only hence
update the structure name to intel_guc_client.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-5-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Update name and prototype of GuC submission interface functions

i915 GuC submission is hardware interface and GuC APIs that are not user
facing should be named intel_guc* hence we change GuC submission related
functions name prefix to intel_guc. Also changed the parameter to these
functions to intel_guc struct.

v2: Using local guc variable in intel_uc_fini_hw. (Michal Wajdeczko)
Rebase.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-4-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Update names of submission related static functions

i915_guc_submit, i915_guc_dequeue, i915_guc_submission_park and
i915_guc_submission_upark are functions internal to GuC submission
hence remove "i915_" prefix.

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-3-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Update execlists tasklet naming

intel_lrc_irq_handler and i915_guc_irq_handler are HW submission related
tasklet functions. Name them with "submission_tasklet" suffix and
remove intel/i915 prefix as they are static. Also rename irq_tasklet
as just tasklet for clarity.

v2: s/_bh/_tasklet (Chris)

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-2-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Prevent overflow of execbuf.buffer_count and num_cliprects

We check whether the multiplies will overflow prior to calling
kmalloc_array so that we can respond with -EINVAL for the invalid user
arguments rather than treating it as an -ENOMEM that would otherwise
occur. However, as Dan Carpenter pointed out, we did an addition on the
unsigned int prior to passing to kmalloc_array where it would be
promoted to size_t for the calculation, thereby allowing it to overflow
and underallocate.

v2: buffer_count is currently limited to INT_MAX because we treat it as
signaled variable for LUT_HANDLE in eb_lookup_vma
v3: Move common checks for eb1/eb2 into the same function
v4: Put the check back for nfence*sizeof(user_fence) overflow
v5: access_ok uses ULONG_MAX but kvmalloc_array uses SIZE_MAX
v6: size_t and unsigned long are not type-equivalent on 32b

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116105059.25142-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Clear breadcrumb node when cancelling signaling

When we call intel_engine_cancel_signaling() to stop reporting when
a request is completed via an asynchronous signal, we remove that request
from the breadcrumb wait queue. However, we may be concurrently
processing that request in the signaler itself, the actual operations on
the request's node itself are serialised but we do not actually clear the
waiter after removing it from the tree allowing both parties to attempt
to do so and corrupting the rbtree. (Previously removing from the
breadcrumb wait queue could only be done on behalf of i915_wait_request,
so this race could not happen).

Reported-by: "He, Bo" <bo.he@intel.com>
Fixes: 9eb143bbec7d ("drm/i915: Allow a request to be cancelled")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "He, Bo" <bo.he@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115121458.24655-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Print the condition causing GEM_BUG_ON

It is easier to categorize and debug bugs if the failed condition
is in plain sight in the actual dmesg output. Make it so.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116083954.3357-1-mika.kuoppala@linux.intel.com