git.kernel.dk Git - linux-2.6-block.git/log

kunit: Fix again checksum tests on big endian CPUs

Commit b38460bc463c ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.

So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.

Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-net-2024-02-28' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- mgmt: Fix limited discoverable off timeout
- hci_qca: Set BDA quirk bit if fwnode exists in DT
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_sync: Check the correct flag before starting a scan
- Enforce validation on max value of connection interval
- hci_sync: Fix accept_list when attempting to suspend
- hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
- Avoid potential use-after-free in hci_error_reset
- rfcomm: Fix null-ptr-deref in rfcomm_check_security
- hci_event: Fix wrongly recorded wakeup BD_ADDR
- qca: Fix wrong event type for patch config command
- qca: Fix triggering coredump implementation

* tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: qca: Fix triggering coredump implementation
  Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
  Bluetooth: qca: Fix wrong event type for patch config command
  Bluetooth: Enforce validation on max value of connection interval
  Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
  Bluetooth: mgmt: Fix limited discoverable off timeout
  Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
  Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
  Bluetooth: hci_sync: Fix accept_list when attempting to suspend
  Bluetooth: Avoid potential use-after-free in hci_error_reset
  Bluetooth: hci_sync: Check the correct flag before starting a scan
  Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
====================

Link: https://lore.kernel.org/r/20240228145644.2269088-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tls-a-few-more-fixes-for-async-decrypt'

Sabrina Dubroca says:

====================
tls: a few more fixes for async decrypt

The previous patchset [1] took care of "full async". This adds a few
fixes for cases where only part of the crypto operations go the async
route, found by extending my previous debug patch [2] to do N
synchronous operations followed by M asynchronous ops (with N and M
configurable).

[1] https://patchwork.kernel.org/project/netdevbpf/list/?series=823784&state=*
[2] https://lore.kernel.org/all/9d664093b1bf7f47497b2c40b3a085b45f3274a2.1694021240.git.sd@queasysnail.net/
====================

Link: https://lore.kernel.org/r/cover.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: fix use-after-free on failed backlog decryption

When the decrypt request goes to the backlog and crypto_aead_decrypt
returns -EBUSY, tls_do_decryption will wait until all async
decryptions have completed. If one of them fails, tls_do_decryption
will return -EBADMSG and tls_decrypt_sg jumps to the error path,
releasing all the pages. But the pages have been passed to the async
callback, and have already been released by tls_decrypt_done.

The only true async case is when crypto_aead_decrypt returns
-EINPROGRESS. With -EBUSY, we already waited so we can tell
tls_sw_recvmsg that the data is available for immediate copy, but we
need to notify tls_decrypt_sg (via the new ->async_done flag) that the
memory has already been released.

Fixes: 859054147318 ("net: tls: handle backlogging of crypto requests")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/4755dd8d9bebdefaa19ce1439b833d6199d4364c.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: separate no-async decryption request handling from async

If we're not doing async, the handling is much simpler. There's no
reference counting, we just need to wait for the completion to wake us
up and return its result.

We should preferably also use a separate crypto_wait. I'm not seeing a
UAF as I did in the past, I think aec7961916f3 ("tls: fix race between
async notify and socket close") took care of it.

This will make the next fix easier.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/47bde5f649707610eaef9f0d679519966fc31061.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: fix peeking with sync+async decryption

If we peek from 2 records with a currently empty rx_list, and the
first record is decrypted synchronously but the second record is
decrypted async, the following happens:
  1. decrypt record 1 (sync)
  2. copy from record 1 to the userspace's msg
  3. queue the decrypted record to rx_list for future read(!PEEK)
  4. decrypt record 2 (async)
  5. queue record 2 to rx_list
  6. call process_rx_list to copy data from the 2nd record

We currently pass copied=0 as skip offset to process_rx_list, so we
end up copying once again from the first record. We should skip over
the data we've already copied.

Seen with selftest tls.12_aes_gcm.recv_peek_large_buf_mult_recs

Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/1b132d2b2b99296bfde54e8a67672d90d6d16e71.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: decrement decrypt_pending if no async completion will be called

With mixed sync/async decryption, or failures of crypto_aead_decrypt,
we increment decrypt_pending but we never do the corresponding
decrement since tls_decrypt_done will not be called. In this case, we
should decrement decrypt_pending immediately to avoid getting stuck.

For example, the prequeue prequeue test gets stuck with mixed
modes (one async decrypt + one sync decrypt).

Fixes: 94524d8fc965 ("net/tls: Add support for async decryption of tls records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/c56d5fc35543891d5319f834f25622360e1bfbec.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

gtp: fix use-after-free and null-ptr-deref in gtp_newlink()

The gtp_link_ops operations structure for the subsystem must be
registered after registering the gtp_net_ops pernet operations structure.

Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug:

[ 1010.702740] gtp: GTP module unloaded
[ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
[ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1
[ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014
[ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp]
[ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00
[ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203
[ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000
[ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282
[ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000
[ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80
[ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400
[ 1010.715953] FS:  00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000
[ 1010.715958] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0
[ 1010.715968] PKRU: 55555554
[ 1010.715972] Call Trace:
[ 1010.715985]  ? __die_body.cold+0x1a/0x1f
[ 1010.715995]  ? die_addr+0x43/0x70
[ 1010.716002]  ? exc_general_protection+0x199/0x2f0
[ 1010.716016]  ? asm_exc_general_protection+0x1e/0x30
[ 1010.716026]  ? gtp_newlink+0x4d7/0x9c0 [gtp]
[ 1010.716034]  ? gtp_net_exit+0x150/0x150 [gtp]
[ 1010.716042]  __rtnl_newlink+0x1063/0x1700
[ 1010.716051]  ? rtnl_setlink+0x3c0/0x3c0
[ 1010.716063]  ? is_bpf_text_address+0xc0/0x1f0
[ 1010.716070]  ? kernel_text_address.part.0+0xbb/0xd0
[ 1010.716076]  ? __kernel_text_address+0x56/0xa0
[ 1010.716084]  ? unwind_get_return_address+0x5a/0xa0
[ 1010.716091]  ? create_prof_cpu_mask+0x30/0x30
[ 1010.716098]  ? arch_stack_walk+0x9e/0xf0
[ 1010.716106]  ? stack_trace_save+0x91/0xd0
[ 1010.716113]  ? stack_trace_consume_entry+0x170/0x170
[ 1010.716121]  ? __lock_acquire+0x15c5/0x5380
[ 1010.716139]  ? mark_held_locks+0x9e/0xe0
[ 1010.716148]  ? kmem_cache_alloc_trace+0x35f/0x3c0
[ 1010.716155]  ? __rtnl_newlink+0x1700/0x1700
[ 1010.716160]  rtnl_newlink+0x69/0xa0
[ 1010.716166]  rtnetlink_rcv_msg+0x43b/0xc50
[ 1010.716172]  ? rtnl_fdb_dump+0x9f0/0x9f0
[ 1010.716179]  ? lock_acquire+0x1fe/0x560
[ 1010.716188]  ? netlink_deliver_tap+0x12f/0xd50
[ 1010.716196]  netlink_rcv_skb+0x14d/0x440
[ 1010.716202]  ? rtnl_fdb_dump+0x9f0/0x9f0
[ 1010.716208]  ? netlink_ack+0xab0/0xab0
[ 1010.716213]  ? netlink_deliver_tap+0x202/0xd50
[ 1010.716220]  ? netlink_deliver_tap+0x218/0xd50
[ 1010.716226]  ? __virt_addr_valid+0x30b/0x590
[ 1010.716233]  netlink_unicast+0x54b/0x800
[ 1010.716240]  ? netlink_attachskb+0x870/0x870
[ 1010.716248]  ? __check_object_size+0x2de/0x3b0
[ 1010.716254]  netlink_sendmsg+0x938/0xe40
[ 1010.716261]  ? netlink_unicast+0x800/0x800
[ 1010.716269]  ? __import_iovec+0x292/0x510
[ 1010.716276]  ? netlink_unicast+0x800/0x800
[ 1010.716284]  __sock_sendmsg+0x159/0x190
[ 1010.716290]  ____sys_sendmsg+0x712/0x880
[ 1010.716297]  ? sock_write_iter+0x3d0/0x3d0
[ 1010.716304]  ? __ia32_sys_recvmmsg+0x270/0x270
[ 1010.716309]  ? lock_acquire+0x1fe/0x560
[ 1010.716315]  ? drain_array_locked+0x90/0x90
[ 1010.716324]  ___sys_sendmsg+0xf8/0x170
[ 1010.716331]  ? sendmsg_copy_msghdr+0x170/0x170
[ 1010.716337]  ? lockdep_init_map_type+0x2c7/0x860
[ 1010.716343]  ? lockdep_hardirqs_on_prepare+0x430/0x430
[ 1010.716350]  ? debug_mutex_init+0x33/0x70
[ 1010.716360]  ? percpu_counter_add_batch+0x8b/0x140
[ 1010.716367]  ? lock_acquire+0x1fe/0x560
[ 1010.716373]  ? find_held_lock+0x2c/0x110
[ 1010.716384]  ? __fd_install+0x1b6/0x6f0
[ 1010.716389]  ? lock_downgrade+0x810/0x810
[ 1010.716396]  ? __fget_light+0x222/0x290
[ 1010.716403]  __sys_sendmsg+0xea/0x1b0
[ 1010.716409]  ? __sys_sendmsg_sock+0x40/0x40
[ 1010.716419]  ? lockdep_hardirqs_on_prepare+0x2b3/0x430
[ 1010.716425]  ? syscall_enter_from_user_mode+0x1d/0x60
[ 1010.716432]  do_syscall_64+0x30/0x40
[ 1010.716438]  entry_SYSCALL_64_after_hwframe+0x62/0xc7
[ 1010.716444] RIP: 0033:0x7fd1508cbd49
[ 1010.716452] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ef 70 0d 00 f7 d8 64 89 01 48
[ 1010.716456] RSP: 002b:00007fff18872348 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 1010.716463] RAX: ffffffffffffffda RBX: 000055f72bf0eac0 RCX: 00007fd1508cbd49
[ 1010.716468] RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000006
[ 1010.716473] RBP: 00007fff18872360 R08: 00007fff18872360 R09: 00007fff18872360
[ 1010.716478] R10: 00007fff18872360 R11: 0000000000000202 R12: 000055f72bf0e1b0
[ 1010.716482] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 1010.716491] Modules linked in: gtp(+) udp_tunnel ib_core uinput af_packet rfkill qrtr joydev hid_generic usbhid hid kvm_intel iTCO_wdt intel_pmc_bxt iTCO_vendor_support kvm snd_hda_codec_generic ledtrig_audio irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hda_intel nls_utf8 snd_intel_dspcfg nls_cp866 psmouse aesni_intel vfat crypto_simd fat cryptd glue_helper snd_hda_codec pcspkr snd_hda_core i2c_i801 snd_hwdep i2c_smbus xhci_pci snd_pcm lpc_ich xhci_pci_renesas xhci_hcd qemu_fw_cfg tiny_power_button button sch_fq_codel vboxvideo drm_vram_helper drm_ttm_helper ttm vboxsf vboxguest snd_seq_midi snd_seq_midi_event snd_seq snd_rawmidi snd_seq_device snd_timer snd soundcore msr fuse efi_pstore dm_mod ip_tables x_tables autofs4 virtio_gpu virtio_dma_buf drm_kms_helper cec rc_core drm virtio_rng virtio_scsi rng_core virtio_balloon virtio_blk virtio_net virtio_console net_failover failover ahci libahci libata evdev scsi_mod input_leds serio_raw virtio_pci intel_agp
[ 1010.716674]  virtio_ring intel_gtt virtio [last unloaded: gtp]
[ 1010.716693] ---[ end trace 04990a4ce61e174b ]---

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Ofitserov <oficerovas@altlinux.org>
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228114703.465107-1-oficerovas@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'nf-24-02-29' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.

Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.

There is a day 0 bug in br_netfilter when used with connection tracking.

Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.

For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.

This patch disables NAT and conntrack helpers for multicast packets.

Patch #3 adds a selftest to cover for the br_netfilter bug.

netfilter pull request 24-02-29

* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  selftests: netfilter: add bridge conntrack + multicast test case
  netfilter: bridge: confirm multicast packets before passing them up the stack
  netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================

Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames

Current HSR implementation uses following supervisory frame (even for
HSRv1 the HSR tag is not is not present):

00000000: 01 15 4e 00 01 2d XX YY ZZ 94 77 10 88 fb 00 01
00000010: 7e 1c 17 06 XX YY ZZ 94 77 10 1e 06 XX YY ZZ 94
00000020: 77 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 00 00 00 00 00 00 00 00

The current code adds extra two bytes (i.e. sizeof(struct hsr_sup_tlv))
when offset for skb_pull() is calculated.
This is wrong, as both 'struct hsrv1_ethhdr_sp' and 'hsrv0_ethhdr_sp'
already have 'struct hsr_sup_tag' defined in them, so there is no need
for adding extra two bytes.

This code was working correctly as with no RedBox support, the check for
HSR_TLV_EOT (0x00) was off by two bytes, which were corresponding to
zeroed padded bytes for minimal packet size.

Fixes: eafaa88b3eb7 ("net: hsr: Add support for redbox supervision frames")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228085644.3618044-1-lukma@denx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

igb: extend PTP timestamp adjustments to i211

The i211 requires the same PTP timestamp adjustments as the i210,
according to its datasheet. To ensure consistent timestamping across
different platforms, this change extends the existing adjustments to
include the i211.

The adjustment result are tested and comparable for i210 and i211 based
systems.

Fixes: 3f544d2a4d5c ("igb: adjust PTP timestamps for Tx/Rx latency")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240227184942.362710-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back

In the commit d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.

if (have_flags)
memcpy(nla_data(attr), &flags, sizeof(flags));
// attr should point to IFLA_BRIDGE_FLAGS NLA !!!

Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.

This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.

Fixes: d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools: ynl: fix handling of multiple mcast groups

We never increment the group number iterator, so all groups
get recorded into index 0 of the mcast_groups[] array.

As a result YNL can only handle using the last group.
For example using the "netdev" sample on kernel with
page pool commands results in:

$ ./samples/netdev
YNL: Multicast group 'mgmt' not found

Most families have only one multicast group, so this hasn't
been noticed. Plus perhaps developers usually test the last
group which would have worked.

Fixes: 86878f14d71a ("tools: ynl: user space helpers")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240226214019.1255242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: netfilter: add bridge conntrack + multicast test case

Add test case for multicast packet confirm race.
Without preceding patch, this should result in:

WARNING: CPU: 0 PID: 38 at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm+0x3ed/0x5f0
Workqueue: events_unbound macvlan_process_broadcast
RIP: 0010:__nf_conntrack_confirm+0x3ed/0x5f0
  ? __nf_conntrack_confirm+0x3ed/0x5f0
  nf_confirm+0x2ad/0x2d0
  nf_hook_slow+0x36/0xd0
  ip_local_deliver+0xce/0x110
  __netif_receive_skb_one_core+0x4f/0x70
  process_backlog+0x8c/0x130
  [..]

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: bridge: confirm multicast packets before passing them up the stack

conntrack nf_confirm logic cannot handle cloned skbs referencing
the same nf_conn entry, which will happen for multicast (broadcast)
frames on bridges.

Example:
    macvlan0
       |
      br0
     /  \
  ethX    ethY

ethX (or Y) receives a L2 multicast or broadcast packet containing
an IP packet, flow is not yet in conntrack table.

1. skb passes through bridge and fake-ip (br_netfilter)Prerouting.
    -> skb->_nfct now references a unconfirmed entry
2. skb is broad/mcast packet. bridge now passes clones out on each bridge
    interface.
3. skb gets passed up the stack.
4. In macvlan case, macvlan driver retains clone(s) of the mcast skb
    and schedules a work queue to send them out on the lower devices.

    The clone skb->_nfct is not a copy, it is the same entry as the
    original skb.  The macvlan rx handler then returns RX_HANDLER_PASS.
5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb.

The Macvlan broadcast worker and normal confirm path will race.

This race will not happen if step 2 already confirmed a clone. In that
case later steps perform skb_clone() with skb->_nfct already confirmed (in
hash table).  This works fine.

But such confirmation won't happen when eb/ip/nftables rules dropped the
packets before they reached the nf_confirm step in postrouting.

Pablo points out that nf_conntrack_bridge doesn't allow use of stateful
nat, so we can safely discard the nf_conn entry and let inet call
conntrack again.

This doesn't work for bridge netfilter: skb could have a nat
transformation. Also bridge nf prevents re-invocation of inet prerouting
via 'sabotage_in' hook.

Work around this problem by explicit confirmation of the entry at LOCAL_IN
time, before upper layer has a chance to clone the unconfirmed entry.

The downside is that this disables NAT and conntrack helpers.

Alternative fix would be to add locking to all code parts that deal with
unconfirmed packets, but even if that could be done in a sane way this
opens up other problems, for example:

-m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4
-m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5

For multicast case, only one of such conflicting mappings will be
created, conntrack only handles 1:1 NAT mappings.

Users should set create a setup that explicitly marks such traffic
NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass
them, ruleset might have accept rules for untracked traffic already,
so user-visible behaviour would change.

Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217777
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()

Commit d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family") added
some validation of NFPROTO_* families in the nft_compat module, but it broke
the ability to use legacy iptables modules in dual-stack nftables.

While with legacy iptables one had to independently manage IPv4 and IPv6
tables, with nftables it is possible to have dual-stack tables sharing the
rules. Moreover, it was possible to use rules based on legacy iptables
match/target modules in dual-stack nftables.

As an example, the program from [2] creates an INET dual-stack family table
using an xt_bpf based rule, which looks like the following (the actual output
was generated with a patched nft tool as the current nft tool does not parse
dual stack tables with legacy match rules, so consider it for illustrative
purposes only):

table inet testfw {
  chain input {
    type filter hook prerouting priority filter; policy accept;
    bytecode counter packets 0 bytes 0 accept
  }
}

After d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family") we get
EOPNOTSUPP for the above program.

Fix this by allowing NFPROTO_INET for nft_(match/target)_validate(), but also
restrict the functions to classic iptables hooks.

Changes in v3:
  * clarify that upstream nft will not display such configuration properly and
    that the output was generated with a patched nft tool
  * remove example program from commit description and link to it instead
  * no code changes otherwise

Changes in v2:
  * restrict nft_(match/target)_validate() to classic iptables hooks
  * rewrite example program to use unmodified libnftnl

Fixes: d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family")
Link: https://lore.kernel.org/all/Zc1PfoWN38UuFJRI@calendula/T/#mc947262582c90fec044c7a3398cc92fac7afea72
Link: https://lore.kernel.org/all/20240220145509.53357-1-ignat@cloudflare.com/
Reported-by: Jordan Griege <jgriege@cloudflare.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Bluetooth: qca: Fix triggering coredump implementation

hci_coredump_qca() uses __hci_cmd_sync() to send a vendor-specific command
to trigger firmware coredump, but the command does not have any event as
its sync response, so it is not suitable to use __hci_cmd_sync(), fixed by
using __hci_cmd_send().

Fixes: 06d3fdfcdf5c ("Bluetooth: hci_qca: Add qcom devcoredump support")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT

BT adapter going into UNCONFIGURED state during BT turn ON when
devicetree has no local-bd-address node.

Bluetooth will not work out of the box on such devices, to avoid this
problem, added check to set HCI_QUIRK_USE_BDADDR_PROPERTY based on
local-bd-address node entry.

When this quirk is not set, the public Bluetooth address read by host
from controller though HCI Read BD Address command is
considered as valid.

Fixes: e668eb1e1578 ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts")
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: qca: Fix wrong event type for patch config command

Vendor-specific command patch config has HCI_Command_Complete event as
response, but qca_send_patch_config_cmd() wrongly expects vendor-specific
event for the command, fixed by using right event type.

Btmon log for the vendor-specific command are shown below:
< HCI Command: Vendor (0x3f|0x0000) plen 5
        28 01 00 00 00
> HCI Event: Command Complete (0x0e) plen 5
      Vendor (0x3f|0x0000) ncmd 1
        Status: Success (0x00)
        28

Fixes: 4fac8a7ac80b ("Bluetooth: btqca: sequential validation")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: Enforce validation on max value of connection interval

Right now Linux BT stack cannot pass test case "GAP/CONN/CPUP/BV-05-C
'Connection Parameter Update Procedure Invalid Parameters Central
Responder'" in Bluetooth Test Suite revision GAP.TS.p44. [0]

That was revoled by commit c49a8682fc5d ("Bluetooth: validate BLE
connection interval updates"), but later got reverted due to devices
like keyboards and mice may require low connection interval.

So only validate the max value connection interval to pass the Test
Suite, and let devices to request low connection interval if needed.

[0] https://www.bluetooth.org/docman/handlers/DownloadDoc.ashx?doc_id=229869

Fixes: 68d19d7d9957 ("Revert "Bluetooth: validate BLE connection interval updates"")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST

If we received HCI_EV_IO_CAPA_REQUEST while
HCI_OP_READ_REMOTE_EXT_FEATURES is yet to be responded assume the remote
does support SSP since otherwise this event shouldn't be generated.

Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+9UdG1cMZVmdtN3U2aS16AKMCyTARZZyFX7xTEDWcMOw@mail.gmail.com/T/#t
Fixes: c7f59461f5a7 ("Bluetooth: Fix a refcnt underflow problem for hci_conn")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: mgmt: Fix limited discoverable off timeout

LIMITED_DISCOVERABLE flag is not reset from Class of Device and
advertisement on limited discoverable timeout. This prevents to pass PTS
test GAP/DISC/LIMM/BV-02-C

Calling set_discoverable_sync as when the limited discovery is set
correctly update the Class of Device and advertisement.

Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR

hci_store_wake_reason() wrongly parses event HCI_Connection_Request
as HCI_Connection_Complete and HCI_Connection_Complete as
HCI_Connection_Request, so causes recording wakeup BD_ADDR error and
potential stability issue, fix it by using the correct field.

Fixes: 2f20216c1d6f ("Bluetooth: Emit controller suspend and resume events")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security

During our fuzz testing of the connection and disconnection process at the
RFCOMM layer, we discovered this bug. By comparing the packets from a
normal connection and disconnection process with the testcase that
triggered a KASAN report. We analyzed the cause of this bug as follows:

1. In the packets captured during a normal connection, the host sends a
`Read Encryption Key Size` type of `HCI_CMD` packet
(Command Opcode: 0x1408) to the controller to inquire the length of
encryption key.After receiving this packet, the controller immediately
replies with a Command Completepacket (Event Code: 0x0e) to return the
Encryption Key Size.

2. In our fuzz test case, the timing of the controller's response to this
packet was delayed to an unexpected point: after the RFCOMM and L2CAP
layers had disconnected but before the HCI layer had disconnected.

3. After receiving the Encryption Key Size Response at the time described
in point 2, the host still called the rfcomm_check_security function.
However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;`
had already been released, and when the function executed
`return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`,
specifically when accessing `conn->hcon`, a null-ptr-deref error occurred.

To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling
rfcomm_recv_frame in rfcomm_process_rx.

Signed-off-by: Yuxuan Hu <20373622@buaa.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_sync: Fix accept_list when attempting to suspend

During suspend, only wakeable devices can be in acceptlist, so if the
device was previously added it needs to be removed otherwise the device
can end up waking up the system prematurely.

Fixes: 3b42055388c3 ("Bluetooth: hci_sync: Fix attempting to suspend with unfiltered passive scan")
Signed-off-by: Clancy Shang <clancy.shang@quectel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>

Bluetooth: Avoid potential use-after-free in hci_error_reset

While handling the HCI_EV_HARDWARE_ERROR event, if the underlying
BT controller is not responding, the GPIO reset mechanism would
free the hci_dev and lead to a use-after-free in hci_error_reset.

Here's the call trace observed on a ChromeOS device with Intel AX201:
   queue_work_on+0x3e/0x6c
   __hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth <HASH:3b4a6>]
   ? init_wait_entry+0x31/0x31
   __hci_cmd_sync+0x16/0x20 [bluetooth <HASH:3b4a 6>]
   hci_error_reset+0x4f/0xa4 [bluetooth <HASH:3b4a 6>]
   process_one_work+0x1d8/0x33f
   worker_thread+0x21b/0x373
   kthread+0x13a/0x152
   ? pr_cont_work+0x54/0x54
   ? kthread_blkcg+0x31/0x31
    ret_from_fork+0x1f/0x30

This patch holds the reference count on the hci_dev while processing
a HCI_EV_HARDWARE_ERROR event to avoid potential crash.

Fixes: c7741d16a57c ("Bluetooth: Perform a power cycle when receiving hardware error event")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_sync: Check the correct flag before starting a scan

There's a very confusing mistake in the code starting a HCI inquiry: We're
calling hci_dev_test_flag() to test for HCI_INQUIRY, but hci_dev_test_flag()
checks hdev->dev_flags instead of hdev->flags. HCI_INQUIRY is a bit that's
set on hdev->flags, not on hdev->dev_flags though.

HCI_INQUIRY equals the integer 7, and in hdev->dev_flags, 7 means
HCI_BONDABLE, so we were actually checking for HCI_BONDABLE here.

The mistake is only present in the synchronous code for starting an inquiry,
not in the async one. Also devices are typically bondable while doing an
inquiry, so that might be the reason why nobody noticed it so far.

Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid

A recent commit restored the original (and still documented) semantics
for the HCI_QUIRK_USE_BDADDR_PROPERTY quirk so that the device address
is considered invalid unless an address is provided by firmware.

This specifically means that this flag must only be set for devices with
invalid addresses, but the Broadcom BCM4377 driver has so far been
setting this flag unconditionally.

Fortunately the driver already checks for invalid addresses during setup
and sets the HCI_QUIRK_INVALID_BDADDR flag, which can simply be replaced
with HCI_QUIRK_USE_BDADDR_PROPERTY to indicate that the default address
is invalid but can be overridden by firmware (long term, this should
probably just always be allowed).

Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk")
Cc: stable@vger.kernel.org # 6.5
Reported-by: Felix Zhang <mrman@mrman314.tech>
Link: https://lore.kernel.org/r/77419ffacc5b4875e920e038332575a2a5bff29f.camel@mrman314.tech/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Felix Zhang <mrman@mrman314.tech>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Documentations: correct net_cachelines title for struct inet_sock

The fast path usage breakdown describes the detail for 'inet_sock', fix
the markup title.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: Clear variable when destroying workqueue

Currently when suspending driver and stopping workqueue it is checked whether
workqueue is not NULL and if so, it is destroyed.
Function destroy_workqueue() does drain queue and does clear variable, but
it does not set workqueue variable to NULL. This can cause kernel/module
panic if code attempts to clear workqueue that was not initialized.

This scenario is possible when resuming suspended driver in stmmac_resume(),
because there is no handling for failed stmmac_hw_setup(),
which can fail and return if DMA engine has failed to initialize,
and workqueue is initialized after DMA engine.
Should DMA engine fail to initialize, resume will proceed normally,
but interface won't work and TX queue will eventually timeout,
causing 'Reset adapter' error.
This then does destroy workqueue during reset process.
And since workqueue is initialized after DMA engine and can be skipped,
it will cause kernel/module panic.

To secure against this possible crash, set workqueue variable to NULL when
destroying workqueue.

Log/backtrace from crash goes as follows:
[88.031977]------------[ cut here ]------------
[88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out
[88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398
<Skipping backtrace for watchdog timeout>
[88.032251]---[ end trace e70de432e4d5c2c0 ]---
[88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter.
[88.036359]------------[ cut here ]------------
[88.036519]Call trace:
[88.036523] flush_workqueue+0x3e4/0x430
[88.036528] drain_workqueue+0xc4/0x160
[88.036533] destroy_workqueue+0x40/0x270
[88.036537] stmmac_fpe_stop_wq+0x4c/0x70
[88.036541] stmmac_release+0x278/0x280
[88.036546] __dev_close_many+0xcc/0x158
[88.036551] dev_close_many+0xbc/0x190
[88.036555] dev_close.part.0+0x70/0xc0
[88.036560] dev_close+0x24/0x30
[88.036564] stmmac_service_task+0x110/0x140
[88.036569] process_one_work+0x1d8/0x4a0
[88.036573] worker_thread+0x54/0x408
[88.036578] kthread+0x164/0x170
[88.036583] ret_from_fork+0x10/0x20
[88.036588]---[ end trace e70de432e4d5c2c1 ]---
[88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004

Fixes: 5a5586112b929 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hsr: Fix typo in the hsr_forward_do() function comment

Correct type in the hsr_forward_do() comment.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: adi: move PHYLIB from vendor to driver symbol

In a previous patch I added "select PHYLIB" at the wrong place for the
ADIN1110 driver symbol, so move it to its correct place under the
ADIN1110 kconfig symbol.

Fixes: a9f80df4f514 ("net: ethernet: adi: requires PHYLIB support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/lkml/77012b38-4b49-47f4-9a88-d773d52909ad@infradead.org/T/#m8ba397484738711edc0ad607b2c63ca02244e3c3
Cc: Lennart Franzen <lennart@lfdomain.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: Nuno Sa <nuno.sa@analog.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-2024-02-27' of git://git./linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.8-rc7

Few remaining fixes, hopefully the last wireless pull request to v6.8.
Two fixes to the stack and two to iwlwifi but no high priority fixes
this time.

* tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: only call drv_sta_rc_update for uploaded stations
  MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files
  MAINTAINERS: wifi: update Jeff Johnson e-mail address
  wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices
  wifi: iwlwifi: mvm: ensure offloading TID queue exists
  wifi: nl80211: reject iftype change with mesh ID change
====================

Link: https://lore.kernel.org/r/20240227135751.C5EC6C43390@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

uapi: in6: replace temporary label with rfc9486

Not really a fix per se, but IPV6_TLV_IOAM is still tagged as "TEMPORARY
IANA allocation for IOAM", while RFC 9486 is available for some time
now. Just update the reference.

Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240226124921.9097-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: lan78xx: fix "softirq work is pending" error

Disable BH around the call to napi_schedule() to avoid following
error:
NOHZ tick-stop error: local softirq work is pending, handler #08!!!

Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240226110820.2113584-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: stmmac: Complete meta data only when enabled

Currently using plain XDP/ZC sockets on stmmac results in a kernel crash:

|[  255.822584] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
|[...]
|[  255.822764] Call trace:
|[  255.822766]  stmmac_tx_clean.constprop.0+0x848/0xc38

The program counter indicates xsk_tx_metadata_complete(). It works on
compl->tx_timestamp, which is not set by xsk_tx_metadata_to_compl() due to
missing meta data. Therefore, call xsk_tx_metadata_complete() only when
meta data is actually used.

Tested on imx93 without XDP, with XDP and with XDP/ZC.

Fixes: 1347b419318d ("net: stmmac: Add Tx HWTS support to XDP ZC")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/netdev/87r0h7wg8u.fsf@kurt.kurt.home/
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240222-stmmac_xdp-v2-1-4beee3a037e4@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usb: dm9601: fix wrong return value in dm9601_mdio_read

The MII code does not check the return value of mdio_read (among
others), and therefore no error code should be sent. A previous fix to
the use of an uninitialized variable propagates negative error codes,
that might lead to wrong operations by the MII library.

An example of such issues is the use of mii_nway_restart by the dm9601
driver. The mii_nway_restart function does not check the value returned
by mdio_read, which in this case might be a negative number which could
contain the exact bit the function checks (BMCR_ANENABLE = 0x1000).

Return zero in case of error, as it is common practice in users of
mdio_read to avoid wrong uses of the return value.

Fixes: 8f8abb863fa5 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

veth: try harder when allocating queue memory

struct veth_rq is pretty large, 832B total without debug
options enabled. Since commit under Fixes we try to pre-allocate
enough queues for every possible CPU. Miao Wang reports that
this may lead to order-5 allocations which will fail in production.

Let the allocation fallback to vmalloc() and try harder.
These are the same flags we pass to netdev queue allocation.

Reported-and-tested-by: Miao Wang <shankerwangmiao@gmail.com>
Fixes: 9d3684c24a52 ("veth: create by default nr_possible_cpus queues")
Link: https://lore.kernel.org/all/5F52CAE2-2FB7-4712-95F1-3312FBBFA8DD@gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240223235908.693010-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'ionic-pci-error-handling-fixes'

Shannon Nelson says:

====================
ionic: PCI error handling fixes

These are a few things to make our PCI reset handling better.
====================

Link: https://lore.kernel.org/r/20240223222742.13923-1-shannon.nelson@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ionic: restore netdev feature bits after reset

When rebuilding the lif after an FLR, be sure to restore the
current netdev features, not do the usual first time feature
init. This prevents losing user changes to things like TSO
or vlan tagging states.

Fixes: 45b84188a0a4 ("ionic: keep filters across FLR")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ionic: check cmd_regs before copying in or out

Since we now have potential cases of NULL cmd_regs and info_regs
during a reset recovery, and left NULL if a reset recovery has
failed, we need to check that they exist before we use them.
Most of the cases were covered in the original patch where we
verify before doing the ioreadb() for health or cmd status.
However, we need to protect a few uses of io mem that could
be hit in error recovery or asynchronous threads calls as well
(e.g. ethtool or devlink handlers).

Fixes: 219e183272b4 ("ionic: no fw read when PCI reset failed")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ionic: check before releasing pci regions

AER recovery handler can trigger a PCI Reset after tearing
down the device setup in the error detection handler.  The PCI
Reset handler will also attempt to tear down the device setup,
and this second tear down needs to know that it doesn't need
to call pci_release_regions() a second time.  We can clear
num_bars on tear down and use that to decide later if we need
to clear the resources.  This prevents a harmless but disturbing
warning message
    resource: Trying to free nonexistent resource <0xXXXXXXXXXX-0xXXXXXXXXXX>

Fixes: c3a910e1c47a ("ionic: fill out pci error handlers")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'mptcp-more-misc-fixes-for-v6-8'

Matthieu Baerts says:

====================
mptcp: more misc. fixes for v6.8

This series includes 6 types of fixes:

- Patch 1 fixes v4 mapped in v6 addresses support for the userspace PM,
  when asking to delete a subflow. It was done everywhere else, but not
  there. Patch 2 validates the modification, thanks to a subtest in
  mptcp_join.sh. These patches can be backported up to v5.19.

- Patch 3 is a small fix for a recent bug-fix patch, just to avoid
  printing an irrelevant warning (pr_warn()) once. It can be backported
  up to v5.6, alongside the bug-fix that has been introduced in the
  v6.8-rc5.

- Patches 4 to 6 are fixes for bugs found by Paolo while working on
  TCP_NOTSENT_LOWAT support for MPTCP. These fixes can improve the
  performances in some cases. Patches can be backported up to v5.6,
  v5.11 and v6.7 respectively.

- Patch 7 makes sure 'ss -M' is available when starting MPTCP Join
  selftest as it is required for some subtests since v5.18.

- Patch 8 fixes a possible double-free on socket dismantle. The issue
  always existed, but was unnoticed because it was not causing any
  problem so far. This fix can be backported up to v5.6.

- Patch 9 is a fix for a very recent patch causing lockdep warnings in
  subflow diag. The patch causing the regression -- which fixes another
  issue present since v5.7 -- should be part of the future v6.8-rc6.
  Patch 10 validates the modification, thanks to a new subtest in
  diag.sh.
====================

Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-0-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: explicitly trigger the listener diag code-path

The mptcp diag interface already experienced a few locking bugs
that lockdep and appropriate coverage have detected in advance.

Let's add a test-case triggering the relevant code path, to prevent
similar issues in the future.

Be careful to cope with very slow environments.

Note that we don't need an explicit timeout on the mptcp_connect
subprocess to cope with eventual bug/hang-up as the final cleanup
terminating the child processes will take care of that.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-10-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix possible deadlock in subflow diag

Syzbot and Eric reported a lockdep splat in the subflow diag:

   WARNING: possible circular locking dependency detected
   6.8.0-rc4-syzkaller-00212-g40b9385dd8e6 #0 Not tainted

   syz-executor.2/24141 is trying to acquire lock:
   ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at:
   tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline]
   ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at:
   tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137

   but task is already holding lock:
   ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: spin_lock
   include/linux/spinlock.h:351 [inline]
   ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at:
   inet_diag_dump_icsk+0x39f/0x1f80 net/ipv4/inet_diag.c:1038

   which lock already depends on the new lock.

   the existing dependency chain (in reverse order) is:

   -> #1 (&h->lhash2[i].lock){+.+.}-{2:2}:
   lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
   __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
   _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
   spin_lock include/linux/spinlock.h:351 [inline]
   __inet_hash+0x335/0xbe0 net/ipv4/inet_hashtables.c:743
   inet_csk_listen_start+0x23a/0x320 net/ipv4/inet_connection_sock.c:1261
   __inet_listen_sk+0x2a2/0x770 net/ipv4/af_inet.c:217
   inet_listen+0xa3/0x110 net/ipv4/af_inet.c:239
   rds_tcp_listen_init+0x3fd/0x5a0 net/rds/tcp_listen.c:316
   rds_tcp_init_net+0x141/0x320 net/rds/tcp.c:577
   ops_init+0x352/0x610 net/core/net_namespace.c:136
   __register_pernet_operations net/core/net_namespace.c:1214 [inline]
   register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1283
   register_pernet_device+0x33/0x80 net/core/net_namespace.c:1370
   rds_tcp_init+0x62/0xd0 net/rds/tcp.c:735
   do_one_initcall+0x238/0x830 init/main.c:1236
   do_initcall_level+0x157/0x210 init/main.c:1298
   do_initcalls+0x3f/0x80 init/main.c:1314
   kernel_init_freeable+0x42f/0x5d0 init/main.c:1551
   kernel_init+0x1d/0x2a0 init/main.c:1441
   ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242

   -> #0 (k-sk_lock-AF_INET6){+.+.}-{0:0}:
   check_prev_add kernel/locking/lockdep.c:3134 [inline]
   check_prevs_add kernel/locking/lockdep.c:3253 [inline]
   validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869
   __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137
   lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
   lock_sock_fast include/net/sock.h:1723 [inline]
   subflow_get_info+0x166/0xd20 net/mptcp/diag.c:28
   tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline]
   tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137
   inet_sk_diag_fill+0x10ed/0x1e00 net/ipv4/inet_diag.c:345
   inet_diag_dump_icsk+0x55b/0x1f80 net/ipv4/inet_diag.c:1061
   __inet_diag_dump+0x211/0x3a0 net/ipv4/inet_diag.c:1263
   inet_diag_dump_compat+0x1c1/0x2d0 net/ipv4/inet_diag.c:1371
   netlink_dump+0x59b/0xc80 net/netlink/af_netlink.c:2264
   __netlink_dump_start+0x5df/0x790 net/netlink/af_netlink.c:2370
   netlink_dump_start include/linux/netlink.h:338 [inline]
   inet_diag_rcv_msg_compat+0x209/0x4c0 net/ipv4/inet_diag.c:1405
   sock_diag_rcv_msg+0xe7/0x410
   netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
   sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280
   netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
   netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
   netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
   sock_sendmsg_nosec net/socket.c:730 [inline]
   __sock_sendmsg+0x221/0x270 net/socket.c:745
   ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
   ___sys_sendmsg net/socket.c:2638 [inline]
   __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
   do_syscall_64+0xf9/0x240
   entry_SYSCALL_64_after_hwframe+0x6f/0x77

As noted by Eric we can break the lock dependency chain avoid
dumping any extended info for the mptcp subflow listener:
nothing actually useful is presented there.

Fixes: b8adb69a7d29 ("mptcp: fix lockless access in subflow ULP diag")
Cc: stable@vger.kernel.org
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iJ=Oecw6OZDwmSYc9HJKQ_G32uN11L+oUcMu+TOD5Xiaw@mail.gmail.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-9-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix double-free on socket dismantle

when MPTCP server accepts an incoming connection, it clones its listener
socket. However, the pointer to 'inet_opt' for the new socket has the same
value as the original one: as a consequence, on program exit it's possible
to observe the following splat:

  BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0
  Free of addr ffff888485950880 by task swapper/25/0

  CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609
  Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0  07/26/2013
  Call Trace:
   <IRQ>
   dump_stack_lvl+0x32/0x50
   print_report+0xca/0x620
   kasan_report_invalid_free+0x64/0x90
   __kasan_slab_free+0x1aa/0x1f0
   kfree+0xed/0x2e0
   inet_sock_destruct+0x54f/0x8b0
   __sk_destruct+0x48/0x5b0
   rcu_do_batch+0x34e/0xd90
   rcu_core+0x559/0xac0
   __do_softirq+0x183/0x5a4
   irq_exit_rcu+0x12d/0x170
   sysvec_apic_timer_interrupt+0x6b/0x80
   </IRQ>
   <TASK>
   asm_sysvec_apic_timer_interrupt+0x16/0x20
  RIP: 0010:cpuidle_enter_state+0x175/0x300
  Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b
  RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202
  RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000
  RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588
  RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080
  R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0
  R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80
   cpuidle_enter+0x4a/0xa0
   do_idle+0x310/0x410
   cpu_startup_entry+0x51/0x60
   start_secondary+0x211/0x270
   secondary_startup_64_no_verify+0x184/0x18b
   </TASK>

  Allocated by task 6853:
   kasan_save_stack+0x1c/0x40
   kasan_save_track+0x10/0x30
   __kasan_kmalloc+0xa6/0xb0
   __kmalloc+0x1eb/0x450
   cipso_v4_sock_setattr+0x96/0x360
   netlbl_sock_setattr+0x132/0x1f0
   selinux_netlbl_socket_post_create+0x6c/0x110
   selinux_socket_post_create+0x37b/0x7f0
   security_socket_post_create+0x63/0xb0
   __sock_create+0x305/0x450
   __sys_socket_create.part.23+0xbd/0x130
   __sys_socket+0x37/0xb0
   __x64_sys_socket+0x6f/0xb0
   do_syscall_64+0x83/0x160
   entry_SYSCALL_64_after_hwframe+0x6e/0x76

  Freed by task 6858:
   kasan_save_stack+0x1c/0x40
   kasan_save_track+0x10/0x30
   kasan_save_free_info+0x3b/0x60
   __kasan_slab_free+0x12c/0x1f0
   kfree+0xed/0x2e0
   inet_sock_destruct+0x54f/0x8b0
   __sk_destruct+0x48/0x5b0
   subflow_ulp_release+0x1f0/0x250
   tcp_cleanup_ulp+0x6e/0x110
   tcp_v4_destroy_sock+0x5a/0x3a0
   inet_csk_destroy_sock+0x135/0x390
   tcp_fin+0x416/0x5c0
   tcp_data_queue+0x1bc8/0x4310
   tcp_rcv_state_process+0x15a3/0x47b0
   tcp_v4_do_rcv+0x2c1/0x990
   tcp_v4_rcv+0x41fb/0x5ed0
   ip_protocol_deliver_rcu+0x6d/0x9f0
   ip_local_deliver_finish+0x278/0x360
   ip_local_deliver+0x182/0x2c0
   ip_rcv+0xb5/0x1c0
   __netif_receive_skb_one_core+0x16e/0x1b0
   process_backlog+0x1e3/0x650
   __napi_poll+0xa6/0x500
   net_rx_action+0x740/0xbb0
   __do_softirq+0x183/0x5a4

  The buggy address belongs to the object at ffff888485950880
   which belongs to the cache kmalloc-64 of size 64
  The buggy address is located 0 bytes inside of
   64-byte region [ffff888485950880, ffff8884859508c0)

  The buggy address belongs to the physical page:
  page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950
  flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff)
  page_type: 0xffffffff()
  raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006
  raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   ffff888485950780: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
   ffff888485950800: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
  >ffff888485950880: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                     ^
   ffff888485950900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
   ffff888485950980: 00 00 00 00 00 01 fc fc fc fc fc fc fc fc fc fc

Something similar (a refcount underflow) happens with CALIPSO/IPv6. Fix
this by duplicating IP / IPv6 options after clone, so that
ip{,6}_sock_destruct() doesn't end up freeing the same memory area twice.

Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections")
Cc: stable@vger.kernel.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-8-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: add ss mptcp support check

Commands 'ss -M' are used in script mptcp_join.sh to display only MPTCP
sockets. So it must be checked if ss tool supports MPTCP in this script.

Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-7-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix potential wake-up event loss

After the blamed commit below, the send buffer auto-tuning can
happen after that the mptcp_propagate_sndbuf() completes - via
the delegated action infrastructure.

We must check for write space even after such change or we risk
missing the wake-up event.

Fixes: 8005184fd1ca ("mptcp: refactor sndbuf auto-tuning")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-6-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix snd_wnd initialization for passive socket

Such value should be inherited from the first subflow, but
passive sockets always used 'rsk_rcv_wnd'.

Fixes: 6f8a612a33e4 ("mptcp: keep track of advertised windows right edge")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-5-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: push at DSS boundaries

when inserting not contiguous data in the subflow write queue,
the protocol creates a new skb and prevent the TCP stack from
merging it later with already queued skbs by setting the EOR marker.

Still no push flag is explicitly set at the end of previous GSO
packet, making the aggregation on the receiver side sub-optimal -
and packetdrill self-tests less predictable.

Explicitly mark the end of not contiguous DSS with the push flag.

Fixes: 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-4-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: avoid printing warning once on client side

After the 'Fixes' commit mentioned below, the client side might print
the following warning once when a subflow is fully established at the
reception of any valid additional ack:

MPTCP: bogus mpc option on established client sk

That's a normal situation, and no warning should be printed for that. We
can then skip the check when the label is used.

Fixes: e4a0fa47e816 ("mptcp: corner case locking for rx path fields initialization")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-3-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: rm subflow with v4/v4mapped addr

Now both a v4 address and a v4-mapped address are supported when
destroying a userspace pm subflow, this patch adds a second subflow
to "userspace pm add & remove address" test, and two subflows could
be removed two different ways, one with the v4mapped and one with v4.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-2-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: map v4 address to v6 when destroying subflow

Address family of server side mismatches with that of client side, like
in "userspace pm add & remove address" test:

userspace_pm_add_addr $ns1 10.0.2.1 10
userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $SUB_ESTABLISHED

That's because on the server side, the family is set to AF_INET6 and the
v4 address is mapped in a v6 one.

This patch fixes this issue. In mptcp_pm_nl_subflow_destroy_doit(), before
checking local address family with remote address family, map an IPv4
address to an IPv6 address if the pair is a v4-mapped address.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-1-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dpll: rely on rcu for netdev_dpll_pin()

This fixes a possible UAF in if_nlmsg_size(),
which can run without RTNL.

Add rcu protection to "struct dpll_pin"

Move netdev_dpll_pin() from netdevice.h to dpll.h to
decrease name pollution.

Note: This looks possible to no longer acquire RTNL in
netdev_dpll_pin_assign() later in net-next.

v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko)

Fixes: 5f1842692880 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223123208.3543319-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

lan78xx: enable auto speed configuration for LAN7850 if no EEPROM is detected

Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not
present or not flashed, LAN7850 will fail to sync the speed detected by the PHY
with the MAC. In case link speed is 100Mbit, it will accidentally work,
otherwise no data can be transferred.

Better way would be to implement link_up callback, or set auto speed
configuration unconditionally. But this changes would be more intrusive.
So, for now, set it only if no EEPROM is found.

Fixes: e69647a19c87 ("lan78xx: Set ASD in MAC_CR when EEE is enabled.")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240222123839.2816561-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: fix potential "struct net" leak in inet6_rtm_getaddr()

It seems that if userspace provides a correct IFA_TARGET_NETNSID value
but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr()
returns -EINVAL with an elevated "struct net" refcount.

Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: veth: test syncing GRO and XDP state while device is down

Test that we keep GRO flag in sync when XDP is disabled while
the device is closed.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: veth: clear GRO when clearing XDP even when down

veth sets NETIF_F_GRO automatically when XDP is enabled,
because both features use the same NAPI machinery.

The logic to clear NETIF_F_GRO sits in veth_disable_xdp() which
is called both on ndo_stop and when XDP is turned off.
To avoid the flag from being cleared when the device is brought
down, the clearing is skipped when IFF_UP is not set.
Bringing the device down should indeed not modify its features.

Unfortunately, this means that clearing is also skipped when
XDP is disabled _while_ the device is down. And there's nothing
on the open path to bring the device features back into sync.
IOW if user enables XDP, disables it and then brings the device
up we'll end up with a stray GRO flag set but no NAPI instances.

We don't depend on the GRO flag on the datapath, so the datapath
won't crash. We will crash (or hang), however, next time features
are sync'ed (either by user via ethtool or peer changing its config).
The GRO flag will go away, and veth will try to disable the NAPIs.
But the open path never created them since XDP was off, the GRO flag
was a stray. If NAPI was initialized before we'll hang in napi_disable().
If it never was we'll crash trying to stop uninitialized hrtimer.

Move the GRO flag updates to the XDP enable / disable paths,
instead of mixing them with the ndo_open / ndo_close paths.

Fixes: d3256efd8e8b ("veth: allow enabling NAPI even without XDP")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: syzbot+039399a9b96297ddedca@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tun: Fix xdp_rxq_info's queue_index when detaching

When a queue(tfile) is detached, we only update tfile's queue_index,
but do not update xdp_rxq_info's queue_index. This patch fixes it.

Fixes: 8bf5c4ee1889 ("tun: setup xdp_rxq_info")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Link: https://lore.kernel.org/r/1708398727-46308-1-git-send-email-wangyunjian@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ps3/gelic: Fix SKB allocation

Commit 3ce4f9c3fbb3 ("net/ps3_gelic_net: Add gelic_descr structures") of
6.8-rc1 had a copy-and-paste error where the pointer that holds the
allocated SKB (struct gelic_descr.skb) was set to NULL after the SKB was
allocated. This resulted in a kernel panic when the SKB pointer was
accessed.

This fix moves the initialization of the gelic_descr to before the SKB
is allocated.

Reported-by: sambat goson <sombat3960@gmail.com>
Fixes: 3ce4f9c3fbb3 ("net/ps3_gelic_net: Add gelic_descr structures")
Signed-off-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dpaa: fman_memac: accept phy-interface-type = "10gbase-r" in the device tree

Since commit 5d93cfcf7360 ("net: dpaa: Convert to phylink"), we support
the "10gbase-r" phy-mode through a driver-based conversion of "xgmii",
but we still don't actually support it when the device tree specifies
"10gbase-r" proper.

This is because boards such as LS1046A-RDB do not define pcs-handle-names
(for whatever reason) in the ethernet@f0000 device tree node, and the
code enters through this code path:

err = of_property_match_string(mac_node, "pcs-handle-names", "xfi");
// code takes neither branch and falls through
if (err >= 0) {
(...)
} else if (err != -EINVAL && err != -ENODATA) {
goto _return_fm_mac_free;
}

(...)

/* For compatibility, if pcs-handle-names is missing, we assume this
* phy is the first one in pcsphy-handle
*/
err = of_property_match_string(mac_node, "pcs-handle-names", "sgmii");
if (err == -EINVAL || err == -ENODATA)
pcs = memac_pcs_create(mac_node, 0); // code takes this branch
else if (err < 0)
goto _return_fm_mac_free;
else
pcs = memac_pcs_create(mac_node, err);

// A default PCS is created and saved in "pcs"

// This determination fails and mistakenly saves the default PCS
// memac->sgmii_pcs instead of memac->xfi_pcs, because at this
// stage, mac_dev->phy_if == PHY_INTERFACE_MODE_10GBASER.
if (err && mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
memac->xfi_pcs = pcs;
else
memac->sgmii_pcs = pcs;

In other words, in the absence of pcs-handle-names, the default
xfi_pcs assignment logic only works when in the device tree we have
PHY_INTERFACE_MODE_XGMII.

By reversing the order between the fallback xfi_pcs assignment and the
"xgmii" overwrite with "10gbase-r", we are able to support both values
in the device tree, with identical behavior.

Currently, it is impossible to make the s/xgmii/10gbase-r/ device tree
conversion, because it would break forward compatibility (new device
tree with old kernel). The only way to modify existing device trees to
phy-interface-mode = "10gbase-r" is to fix stable kernels to accept this
value and handle it properly.

One reason why the conversion is desirable is because with pre-phylink
kernels, the Aquantia PHY driver used to warn about the improper use
of PHY_INTERFACE_MODE_XGMII [1]. It is best to have a single (latest)
device tree that works with all supported stable kernel versions.

Note that the blamed commit does not constitute a regression per se.
Older stable kernels like 6.1 still do not work with "10gbase-r", but
for a different reason. That is a battle for another time.

[1] https://lore.kernel.org/netdev/20240214-ls1046-dts-use-10gbase-r-v1-1-8c2d68547393@concurrent-rt.com/

Fixes: 5d93cfcf7360 ("net: dpaa: Convert to phylink")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wifi: mac80211: only call drv_sta_rc_update for uploaded stations

When a station has not been uploaded yet, receiving SMPS or channel width
notification action frames can lead to rate_control_rate_update calling
drv_sta_rc_update with uninitialized driver private data.
Fix this by adding a missing check for sta->uploaded.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240221140535.16102-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net: mctp: take ownership of skb in mctp_local_output

Currently, mctp_local_output only takes ownership of skb on success, and
we may leak an skb if mctp_local_output fails in specific states; the
skb ownership isn't transferred until the actual output routing occurs.

Instead, make mctp_local_output free the skb on all error paths up to
the route action, so it always consumes the passed skb.

Fixes: 833ef3b91de6 ("mctp: Populate socket implementation")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220081053.1439104-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-02-20 (ice)

This series contains updates to ice driver only.

Yochai sets parent device to properly reflect connection state between
source DPLL and output pin.

Arkadiusz fixes additional issues related to DPLL; proper reporting of
phase_adjust value and preventing use/access of data while resetting.

Amritha resolves ASSERT_RTNL() being triggered on certain reset/rebuild
flows.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Fix ASSERT_RTNL() warning during certain scenarios
  ice: fix pin phase adjust updates on PF reset
  ice: fix dpll periodic work data updates on PF reset
  ice: fix dpll and dpll_pin data access on PF reset
  ice: fix dpll input pin phase_adjust value updates
  ice: fix connection state of DPLL and out pin
====================

Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240220214444.1039759-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ip_tunnel: prevent perpetual headroom growth

syzkaller triggered following kasan splat:
BUG: KASAN: use-after-free in __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
Read of size 1 at addr ffff88812fb4000e by task syz-executor183/5191
[..]
kasan_report+0xda/0x110 mm/kasan/report.c:588
__skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
skb_flow_dissect_flow_keys include/linux/skbuff.h:1514 [inline]
___skb_get_hash net/core/flow_dissector.c:1791 [inline]
__skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856
skb_get_hash include/linux/skbuff.h:1556 [inline]
ip_tunnel_xmit+0x1855/0x33c0 net/ipv4/ip_tunnel.c:748
ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
__dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592
...
ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235
ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323
..
iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831
ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
...

The splat occurs because skb->data points past skb->head allocated area.
This is because neigh layer does:
  __skb_pull(skb, skb_network_offset(skb));

... but skb_network_offset() returns a negative offset and __skb_pull()
arg is unsigned.  IOW, we skb->data gets "adjusted" by a huge value.

The negative value is returned because skb->head and skb->data distance is
more than 64k and skb->network_header (u16) has wrapped around.

The bug is in the ip_tunnel infrastructure, which can cause
dev->needed_headroom to increment ad infinitum.

The syzkaller reproducer consists of packets getting routed via a gre
tunnel, and route of gre encapsulated packets pointing at another (ipip)
tunnel.  The ipip encapsulation finds gre0 as next output device.

This results in the following pattern:

1). First packet is to be sent out via gre0.
Route lookup found an output device, ipip0.

2).
ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future
output device, rt.dev->needed_headroom (ipip0).

3).
ip output / start_xmit moves skb on to ipip0. which runs the same
code path again (xmit recursion).

4).
Routing step for the post-gre0-encap packet finds gre0 as output device
to use for ipip0 encapsulated packet.

tunl0->needed_headroom is then incremented based on the (already bumped)
gre0 device headroom.

This repeats for every future packet:

gre0->needed_headroom gets inflated because previous packets' ipip0 step
incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0
needed_headroom was increased.

For each subsequent packet, gre/ipip0->needed_headroom grows until
post-expand-head reallocations result in a skb->head/data distance of
more than 64k.

Once that happens, skb->network_header (u16) wraps around when
pskb_expand_head tries to make sure that skb_network_offset() is unchanged
after the headroom expansion/reallocation.

After this skb_network_offset(skb) returns a different (and negative)
result post headroom expansion.

The next trip to neigh layer (or anything else that would __skb_pull the
network header) makes skb->data point to a memory location outside
skb->head area.

v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to
prevent perpetual increase instead of dropping the headroom increment
completely.

Reported-and-tested-by: syzbot+bfde3bef047a81b8fde6@syzkaller.appspotmail.com
Closes: https://groups.google.com/g/syzkaller-bugs/c/fL9G6GtWskY/m/VKk_PR5FBAAJ
Fixes: 243aad830e8a ("ip_gre: include route header_len in max_headroom calculation")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220135606.4939-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: smsc95xx: add support for SYS TEC USB-SPEmodule1

This patch adds support for the SYS TEC USB-SPEmodule1 10Base-T1L
ethernet device to the existing smsc95xx driver by adding the new
USB VID/PID pair.

Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20240219053413.4732-1-andre.werner@systec-electronic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: add nla be16/32 types to minlen array

BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline]
BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline]
BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline]
BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631
nla_validate_range_unsigned lib/nlattr.c:222 [inline]
nla_validate_int_range lib/nlattr.c:336 [inline]
validate_nla lib/nlattr.c:575 [inline]
...

The message in question matches this policy:

[NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255),

but because NLA_BE32 size in minlen array is 0, the validation
code will read past the malformed (too small) attribute.

Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing:
those likely should be added too.

Reported-by: syzbot+3f497b07aa3baf2fb4d0@syzkaller.appspotmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/all/CABOYnLzFYHSnvTyS6zGa-udNX55+izqkOt2sB9WDqUcEGW6n8w@mail.gmail.com/raw
Fixes: ecaf75ffd5f5 ("netlink: introduce bigendian integer types")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240221172740.5092-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter

syzbot reported the following uninit-value access issue [1]:

netlink_to_full_skb() creates a new `skb` and puts the `skb->data`
passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data
size is specified as `len` and passed to skb_put_data(). This `len`
is based on `skb->end` that is not data offset but buffer offset. The
`skb->end` contains data and tailroom. Since the tailroom is not
initialized when the new `skb` created, KMSAN detects uninitialized
memory area when copying the data.

This patch resolved this issue by correct the len from `skb->end` to
`skb->len`, which is the actual data offset.

BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186
instrument_copy_to_user include/linux/instrumented.h:114 [inline]
copy_to_user_iter lib/iov_iter.c:24 [inline]
iterate_ubuf include/linux/iov_iter.h:29 [inline]
iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
iterate_and_advance include/linux/iov_iter.h:271 [inline]
_copy_to_iter+0x364/0x2520 lib/iov_iter.c:186
copy_to_iter include/linux/uio.h:197 [inline]
simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:532
__skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:420
skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546
skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline]
packet_recvmsg+0xd9c/0x2000 net/packet/af_packet.c:3482
sock_recvmsg_nosec net/socket.c:1044 [inline]
sock_recvmsg net/socket.c:1066 [inline]
sock_read_iter+0x467/0x580 net/socket.c:1136
call_read_iter include/linux/fs.h:2014 [inline]
new_sync_read fs/read_write.c:389 [inline]
vfs_read+0x8f6/0xe00 fs/read_write.c:470
ksys_read+0x20f/0x4c0 fs/read_write.c:613
__do_sys_read fs/read_write.c:623 [inline]
__se_sys_read fs/read_write.c:621 [inline]
__x64_sys_read+0x93/0xd0 fs/read_write.c:621
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was stored to memory at:
skb_put_data include/linux/skbuff.h:2622 [inline]
netlink_to_full_skb net/netlink/af_netlink.c:181 [inline]
__netlink_deliver_tap_skb net/netlink/af_netlink.c:298 [inline]
__netlink_deliver_tap+0x5be/0xc90 net/netlink/af_netlink.c:325
netlink_deliver_tap net/netlink/af_netlink.c:338 [inline]
netlink_deliver_tap_kernel net/netlink/af_netlink.c:347 [inline]
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x10f1/0x1250 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
free_pages_prepare mm/page_alloc.c:1087 [inline]
free_unref_page_prepare+0xb0/0xa40 mm/page_alloc.c:2347
free_unref_page_list+0xeb/0x1100 mm/page_alloc.c:2533
release_pages+0x23d3/0x2410 mm/swap.c:1042
free_pages_and_swap_cache+0xd9/0xf0 mm/swap_state.c:316
tlb_batch_pages_flush mm/mmu_gather.c:98 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:293 [inline]
tlb_flush_mmu+0x6f5/0x980 mm/mmu_gather.c:300
tlb_finish_mmu+0x101/0x260 mm/mmu_gather.c:392
exit_mmap+0x49e/0xd30 mm/mmap.c:3321
__mmput+0x13f/0x530 kernel/fork.c:1349
mmput+0x8a/0xa0 kernel/fork.c:1371
exit_mm+0x1b8/0x360 kernel/exit.c:567
do_exit+0xd57/0x4080 kernel/exit.c:858
do_group_exit+0x2fd/0x390 kernel/exit.c:1021
__do_sys_exit_group kernel/exit.c:1032 [inline]
__se_sys_exit_group kernel/exit.c:1030 [inline]
__x64_sys_exit_group+0x3c/0x50 kernel/exit.c:1030
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Bytes 3852-3903 of 3904 are uninitialized
Memory access of size 3904 starts at ffff88812ea1e000
Data copied to user address 0000000020003280

CPU: 1 PID: 5043 Comm: syz-executor297 Not tainted 6.7.0-rc5-syzkaller-00047-g5bd7ef53ffe5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023

Fixes: 1853c9496460 ("netlink, mmap: transform mmap skb into full skb on taps")
Reported-and-tested-by: syzbot+34ad5fab48f7bf510349@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=34ad5fab48f7bf510349 [1]
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240221074053.1794118-1-ryasuoka@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.8.0-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.

  Current release - regressions:

   - af_unix: fix another unix GC hangup

  Previous releases - regressions:

   - core: fix a possible AF_UNIX deadlock

   - bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()

   - netfilter: nft_flow_offload: release dst in case direct xmit path
     is used

   - bridge: switchdev: ensure MDB events are delivered exactly once

   - l2tp: pass correct message length to ip6_append_data

   - dccp/tcp: unhash sk from ehash for tb2 alloc failure after
     check_estalblished()

   - tls: fixes for record type handling with PEEK

   - devlink: fix possible use-after-free and memory leaks in
     devlink_init()

  Previous releases - always broken:

   - bpf: fix an oops when attempting to read the vsyscall page through
     bpf_probe_read_kernel

   - sched: act_mirred: use the backlog for mirred ingress

   - netfilter: nft_flow_offload: fix dst refcount underflow

   - ipv6: sr: fix possible use-after-free and null-ptr-deref

   - mptcp: fix several data races

   - phonet: take correct lock to peek at the RX queue

  Misc:

   - handful of fixes and reliability improvements for selftests"

* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  l2tp: pass correct message length to ip6_append_data
  net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
  selftests: ioam: refactoring to align with the fix
  Fix write to cloned skb in ipv6_hop_ioam()
  phonet/pep: fix racy skb_queue_empty() use
  phonet: take correct lock to peek at the RX queue
  net: sparx5: Add spinlock for frame transmission from CPU
  net/sched: flower: Add lock protection when remove filter handle
  devlink: fix port dump cmd type
  net: stmmac: Fix EST offset for dwmac 5.10
  tools: ynl: don't leak mcast_groups on init error
  tools: ynl: make sure we always pass yarg to mnl_cb_run
  net: mctp: put sock on tag allocation failure
  netfilter: nf_tables: use kzalloc for hook allocation
  netfilter: nf_tables: register hooks last when adding new chain/flowtable
  netfilter: nft_flow_offload: release dst in case direct xmit path is used
  netfilter: nft_flow_offload: reset dst in route object after setting up flow
  netfilter: nf_tables: set dormant flag on hook register failure
  selftests: tls: add test for peeking past a record of a different type
  selftests: tls: add test for merging of same-type control messages
  ...

Merge tag 'trace-v6.8-rc5' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fix from Steven Rostedt:

- While working on the ring buffer I noticed that the counter used for
   knowing where the end of the data is on a sub-buffer was not a full
   "int" but just 20 bits. It was masked out to 0xfffff.

   With the new code that allows the user to change the size of the
   sub-buffer, it is theoretically possible to ask for a size bigger
   than 2^20. If that happens, unexpected results may occur as there's
   no code checking if the counter overflowed the 20 bits of the write
   mask. There are other checks to make sure events fit in the
   sub-buffer, but if the sub-buffer itself is too big, that is not
   checked.

   Add a check in the resize of the sub-buffer to make sure that it
   never goes beyond the size of the counter that holds how much data is
   on it.

* tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Do not let subbuf be bigger than write mask

l2tp: pass correct message length to ip6_append_data

l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.

To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.

However, the code which performed the calculation was incorrect:

ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;

...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.

Add parentheses to correct the calculation in line with the original
intent.

Fixes: 9d4c75800f61 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'nf-24-02-22' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) If user requests to wake up a table and hook fails, restore the
   dormant flag from the error path, from Florian Westphal.

2) Reset dst after transferring it to the flow object, otherwise dst
   gets released twice from the error path.

3) Release dst in case the flowtable selects a direct xmit path, eg.
   transmission to bridge port. Otherwise, dst is memleaked.

4) Register basechain and flowtable hooks at the end of the command.
   Error path releases these datastructure without waiting for the
   rcu grace period.

5) Use kzalloc() to initialize struct nft_hook to fix a KMSAN report
   on access to hook type, also from Florian Westphal.

netfilter pull request 24-02-22

* tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: use kzalloc for hook allocation
  netfilter: nf_tables: register hooks last when adding new chain/flowtable
  netfilter: nft_flow_offload: release dst in case direct xmit path is used
  netfilter: nft_flow_offload: reset dst in route object after setting up flow
  netfilter: nf_tables: set dormant flag on hook register failure
====================

Link: https://lore.kernel.org/r/20240222000843.146665-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2024-02-22

The following pull-request contains BPF updates for your *net* tree.

We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).

The main changes are:

1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
   page through bpf_probe_read_kernel and friends, from Hou Tao.

2) Fix a kernel panic due to uninitialized iter position pointer in
   bpf_iter_task, from Yafang Shao.

3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
   from Martin KaFai Lau.

4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
   due to incorrect truesize accounting, from Sebastian Andrzej Siewior.

5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
   from Shigeru Yoshida.

6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
   resolved, from Hari Bathini.

bpf-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
  selftests/bpf: Add negtive test cases for task iter
  bpf: Fix an issue due to uninitialized bpf_iter_task
  selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
  bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
  selftest/bpf: Test the read of vsyscall page under x86-64
  x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
  x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
  bpf, scripts: Correct GPL license name
  xsk: Add truesize to skb_add_rx_frag().
  bpf: Fix warning for bpf_cpumask in verifier
====================

Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY

Commit bb726b753f75 ("net: phy: realtek: add support for
RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing
support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY.

While that commit indicated that the RTL8211F_PHYCR2 register is not
supported by the "VD-CG" PHY model and therefore updated the corresponding
section in rtl8211f_config_init() to be invoked conditionally, the call to
"genphy_soft_reset()" was left as-is, when it should have also been invoked
conditionally. This is because the call to "genphy_soft_reset()" was first
introduced by the commit 0a4355c2b7f8 ("net: phy: realtek: add dt property
to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY
reset should be issued after setting bits in the PHYCR2 register.

As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the
rtl8211f_config_init() function by invoking "genphy_soft_reset()"
conditionally based on the presence of the "PHYCR2" register.

Fixes: bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220070007.968762-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'ioam6-fix-write-to-cloned-skb-s'

Justin Iurman says:

====================
ioam6: fix write to cloned skb's

Make sure the IOAM data insertion is not applied on cloned skb's. As a
consequence, ioam selftests needed a refactoring.
====================

Link: https://lore.kernel.org/r/20240219135255.15429-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests: ioam: refactoring to align with the fix

ioam6_parser uses a packet socket. After the fix to prevent writing to
cloned skb's, the receiver does not see its IOAM data anymore, which
makes input/forward ioam-selftests to fail. As a workaround,
ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to
get hop-by-hop options. As a consequence, the hook is "after" the IOAM
data insertion by the receiver and all tests are working again.

Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Fix write to cloned skb in ipv6_hop_ioam()

ioam6_fill_trace_data() writes inside the skb payload without ensuring
it's writeable (e.g., not cloned). This function is called both from the
input and output path. The output path (ioam6_iptunnel) already does the
check. This commit provides a fix for the input path, inside
ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network
header pointer ("nh") when returning from ipv6_hop_ioam().

Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

phonet/pep: fix racy skb_queue_empty() use

The receive queues are protected by their respective spin-lock, not
the socket lock. This could lead to skb_peek() unexpectedly
returning NULL or a pointer to an already dequeued socket buffer.

Fixes: 9641458d3ec4 ("Phonet: Pipe End Point for Phonet Pipes protocol")
Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com>
Link: https://lore.kernel.org/r/20240218081214.4806-2-remi@remlab.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

phonet: take correct lock to peek at the RX queue

The receive queue is protected by its embedded spin-lock, not the
socket lock, so we need the former lock here (and only that one).

Fixes: 107d0d9b8d9a ("Phonet: Phonet datagram transport protocol")
Reported-by: Luosili <rootlab@huawei.com>
Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240218081214.4806-1-remi@remlab.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: sparx5: Add spinlock for frame transmission from CPU

Both registers used when doing manual injection or fdma injection are
shared between all the net devices of the switch. It was noticed that
when having two process which each of them trying to inject frames on
different ethernet ports, that the HW started to behave strange, by
sending out more frames then expected. When doing fdma injection it is
required to set the frame in the DCB and then make sure that the next
pointer of the last DCB is invalid. But because there is no locks for
this, then easily this pointer between the DCB can be broken and then it
would create a loop of DCBs. And that means that the HW will
continuously transmit these frames in a loop. Until the SW will break
this loop.
Therefore to fix this issue, add a spin lock for when accessing the
registers for manual or fdma injection.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: flower: Add lock protection when remove filter handle

As IDR can't protect itself from the concurrent modification, place
idr_remove() under the protection of tp->lock.

Fixes: 08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240220085928.9161-1-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: fix port dump cmd type

Unlike other commands, due to a c&p error, port dump fills-up cmd with
wrong value, different from port-get request cmd, port-get doit reply
and port notification.

Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.

Skimmed through devlink userspace implementations, none of them cares
about this cmd value. Only ynl, for which, this is actually a fix, as it
expects doit and dumpit ops rsp_value to be the same.

Omit the fixes tag, even thought this is fix, better to target this for
next release.

Fixes: bfcd3a466172 ("Introduce devlink infrastructure")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240220075245.75416-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: stmmac: Fix EST offset for dwmac 5.10

Fix EST offset for dwmac 5.10.

Currently configuring Qbv doesn't work as expected. The schedule is
configured, but never confirmed:

|[  128.250219] imx-dwmac 428a0000.ethernet eth1: configured EST

The reason seems to be the refactoring of the EST code which set the wrong
EST offset for the dwmac 5.10. After fixing this it works as before:

|[  106.359577] imx-dwmac 428a0000.ethernet eth1: configured EST
|[  128.430715] imx-dwmac 428a0000.ethernet eth1: EST: SWOL has been switched

Tested on imx93.

Fixes: c3f3b97238f6 ("net: stmmac: Refactor EST implementation")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240220-stmmac_est-v1-1-c41f9ae2e7b7@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tools-ynl-fix-impossible-errors'

Jakub Kicinski says:

====================
tools: ynl: fix impossible errors

Fix bugs discovered while I was hacking in low level stuff in YNL
and kept breaking the socket, exercising the "impossible" error paths.

v1: https://lore.kernel.org/all/20240217001742.2466993-1-kuba@kernel.org/
====================

Link: https://lore.kernel.org/r/20240220161112.2735195-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools: ynl: don't leak mcast_groups on init error

Make sure to free the already-parsed mcast_groups if
we don't get an ack from the kernel when reading family info.
This is part of the ynl_sock_create() error path, so we won't
get a call to ynl_sock_destroy() to free them later.

Fixes: 86878f14d71a ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240220161112.2735195-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools: ynl: make sure we always pass yarg to mnl_cb_run

There is one common error handler in ynl - ynl_cb_error().
It expects priv to be a pointer to struct ynl_parse_arg AKA yarg.
To avoid potential crashes if we encounter a stray NLMSG_ERROR
always pass yarg as priv (or a struct which has it as the first
member).

ynl_cb_null() has a similar problem directly - it expects yarg
but priv passed by the caller is ys.

Found by code inspection.

Fixes: 86878f14d71a ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240220161112.2735195-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mctp: put sock on tag allocation failure

We may hold an extra reference on a socket if a tag allocation fails: we
optimistically allocate the sk_key, and take a ref there, but do not
drop if we end up not using the allocated key.

Ensure we're dropping the sock on this failure by doing a proper unref
rather than directly kfree()ing.

Fixes: de8a6b15d965 ("net: mctp: add an explicit reference from a mctp_sk_key to sock")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/ce9b61e44d1cdae7797be0c5e3141baf582d23a0.1707983487.git.jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netfilter: nf_tables: use kzalloc for hook allocation

KMSAN reports unitialized variable when registering the hook,
reg->hook_ops_type == NF_HOOK_OP_BPF)
~~~~~~~~~~~ undefined

This is a small structure, just use kzalloc to make sure this
won't happen again when new fields get added to nf_hook_ops.

Fixes: 7b4b2fa37587 ("netfilter: annotate nf_tables base hook ops")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: register hooks last when adding new chain/flowtable

Register hooks last when adding chain/flowtable to ensure that packets do
not walk over datastructure that is being released in the error path
without waiting for the rcu grace period.

Fixes: 91c7b38dc9f0 ("netfilter: nf_tables: use new transaction infrastructure to handle chain")
Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_flow_offload: release dst in case direct xmit path is used

Direct xmit does not use it since it calls dev_queue_xmit() to send
packets, hence it calls dst_release().

kmemleak reports:

unreferenced object 0xffff88814f440900 (size 184):
  comm "softirq", pid 0, jiffies 4294951896
  hex dump (first 32 bytes):
    00 60 5b 04 81 88 ff ff 00 e6 e8 82 ff ff ff ff  .`[.............
    21 0b 50 82 ff ff ff ff 00 00 00 00 00 00 00 00  !.P.............
  backtrace (crc cb2bf5d6):
    [<000000003ee17107>] kmem_cache_alloc+0x286/0x340
    [<0000000021a5de2c>] dst_alloc+0x43/0xb0
    [<00000000f0671159>] rt_dst_alloc+0x2e/0x190
    [<00000000fe5092c9>] __mkroute_output+0x244/0x980
    [<000000005fb96fb0>] ip_route_output_flow+0xc0/0x160
    [<0000000045367433>] nf_ip_route+0xf/0x30
    [<0000000085da1d8e>] nf_route+0x2d/0x60
    [<00000000d1ecd1cb>] nft_flow_route+0x171/0x6a0 [nft_flow_offload]
    [<00000000d9b2fb60>] nft_flow_offload_eval+0x4e8/0x700 [nft_flow_offload]
    [<000000009f447dbb>] expr_call_ops_eval+0x53/0x330 [nf_tables]
    [<00000000072e1be6>] nft_do_chain+0x17c/0x840 [nf_tables]
    [<00000000d0551029>] nft_do_chain_inet+0xa1/0x210 [nf_tables]
    [<0000000097c9d5c6>] nf_hook_slow+0x5b/0x160
    [<0000000005eccab1>] ip_forward+0x8b6/0x9b0
    [<00000000553a269b>] ip_rcv+0x221/0x230
    [<00000000412872e5>] __netif_receive_skb_one_core+0xfe/0x110

Fixes: fa502c865666 ("netfilter: flowtable: simplify route logic")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_flow_offload: reset dst in route object after setting up flow

dst is transferred to the flow object, route object does not own it
anymore. Reset dst in route object, otherwise if flow_offload_add()
fails, error path releases dst twice, leading to a refcount underflow.

Fixes: a3c90f7a2323 ("netfilter: nf_tables: flow offload expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: set dormant flag on hook register failure

We need to set the dormant flag again if we fail to register
the hooks.

During memory pressure hook registration can fail and we end up
with a table marked as active but no registered hooks.

On table/base chain deletion, nf_tables will attempt to unregister
the hook again which yields a warn splat from the nftables core.

Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com
Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge branch 'tls-fixes-for-record-type-handling-with-peek'

Sabrina Dubroca says:

====================
tls: fixes for record type handling with PEEK

There are multiple bugs in tls_sw_recvmsg's handling of record types
when MSG_PEEK flag is used, which can lead to incorrectly merging two
records:
- consecutive non-DATA records shouldn't be merged, even if they're
   the same type (partly handled by the test at the end of the main
   loop)
- records of the same type (even DATA) shouldn't be merged if one
   record of a different type comes in between
====================

Link: https://lore.kernel.org/r/cover.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: tls: add test for peeking past a record of a different type

If we queue 3 records:
- record 1, type DATA
- record 2, some other type
- record 3, type DATA
the current code can look past the 2nd record and merge the 2 data
records.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/4623550f8617c239581030c13402d3262f2bd14f.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: tls: add test for merging of same-type control messages

Two consecutive control messages of the same type should never be
merged into one large received blob of data.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/018f1633d5471684c65def5fe390de3b15c3d683.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: don't skip over different type records from the rx_list

If we queue 3 records:
- record 1, type DATA
- record 2, some other type
- record 3, type DATA
and do a recv(PEEK), the rx_list will contain the first two records.

The next large recv will walk through the rx_list and copy data from
record 1, then stop because record 2 is a different type. Since we
haven't filled up our buffer, we will process the next available
record. It's also DATA, so we can merge it with the current read.

We shouldn't do that, since there was a record in between that we
ignored.

Add a flag to let process_rx_list inform tls_sw_recvmsg that it had
more data available.

Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/f00c0c0afa080c60f016df1471158c1caf983c34.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: stop recv() if initial process_rx_list gave us non-DATA

If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA

Just check the record type and jump to the end in case process_rx_list
did some work.

Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/bd31449e43bd4b6ff546f5c51cf958c31c511deb.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: break out of main loop when PEEK gets a non-data record

PEEK needs to leave decrypted records on the rx_list so that we can
receive them later on, so it jumps back into the async code that
queues the skb. Unfortunately that makes us skip the
TLS_RECORD_TYPE_DATA check at the bottom of the main loop, so if two
records of the same (non-DATA) type are queued, we end up merging
them.

Add the same record type check, and make it unlikely to not penalize
the async fastpath. Async decrypt only applies to data record, so this
check is only needed for PEEK.

process_rx_list also has similar issues.

Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/3df2eef4fdae720c55e69472b5bea668772b45a2.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()

The gtp_net_ops pernet operations structure for the subsystem must be
registered before registering the generic netlink family.

Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug:

general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014
RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp]
Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86
      df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80>
      3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74
RSP: 0018:ffff888014107220 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000
FS:  00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? show_regs+0x90/0xa0
? die_addr+0x50/0xd0
? exc_general_protection+0x148/0x220
? asm_exc_general_protection+0x22/0x30
? gtp_genl_dump_pdp+0x1be/0x800 [gtp]
? __alloc_skb+0x1dd/0x350
? __pfx___alloc_skb+0x10/0x10
genl_dumpit+0x11d/0x230
netlink_dump+0x5b9/0xce0
? lockdep_hardirqs_on_prepare+0x253/0x430
? __pfx_netlink_dump+0x10/0x10
? kasan_save_track+0x10/0x40
? __kasan_kmalloc+0x9b/0xa0
? genl_start+0x675/0x970
__netlink_dump_start+0x6fc/0x9f0
genl_family_rcv_msg_dumpit+0x1bb/0x2d0
? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10
? genl_op_from_small+0x2a/0x440
? cap_capable+0x1d0/0x240
? __pfx_genl_start+0x10/0x10
? __pfx_genl_dumpit+0x10/0x10
? __pfx_genl_done+0x10/0x10
? security_capable+0x9d/0xe0

Cc: stable@vger.kernel.org
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Link: https://lore.kernel.org/r/20240214162733.34214-1-kovalev@altlinux.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files

In [1] it was observed that the ath12k maintainers were not added to
the review of a new ath12k YAML file. Bartosz suggested "adding an N:
ath12k entry to MAINTAINERS" to prevent this in the future. In the
process it was noticed that one of the ath11k YAML files was also not
explicitly referenced, so add N: entries to ath10k, ath11k, and
ath12k, and remove the explicit F: entries.

Link: https://lore.kernel.org/linux-wireless/20240216203215.40870-7-brgl@bgdev.pl/
Suggested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240217-update-maintainer-v1-2-1426cf7a8bb1@quicinc.com