git.kernel.dk Git - linux-block.git/log

perf: Fix event leak upon exec and file release

The perf pending task work is never waited upon the matching event
release. In the case of a child event, released via free_event()
directly, this can potentially result in a leaked event, such as in the
following scenario that doesn't even require a weak IRQ work
implementation to trigger:

schedule()
   prepare_task_switch()
=======> <NMI>
      perf_event_overflow()
         event->pending_sigtrap = ...
         irq_work_queue(&event->pending_irq)
<======= </NMI>
      perf_event_task_sched_out()
          event_sched_out()
              event->pending_sigtrap = 0;
              atomic_long_inc_not_zero(&event->refcount)
              task_work_add(&event->pending_task)
   finish_lock_switch()
=======> <IRQ>
   perf_pending_irq()
      //do nothing, rely on pending task work
<======= </IRQ>

begin_new_exec()
   perf_event_exit_task()
      perf_event_exit_event()
         // If is child event
         free_event()
            WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
            // event is leaked

Similar scenarios can also happen with perf_event_remove_on_exec() or
simply against concurrent perf_event_release().

Fix this with synchonizing against the possibly remaining pending task
work while freeing the event, just like is done with remaining pending
IRQ work. This means that the pending task callback neither need nor
should hold a reference to the event, preventing it from ever beeing
freed.

Fixes: 517e6a301f34 ("perf: Fix perf_pending_task() UaF")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-5-frederic@kernel.org

perf: Fix event leak upon exit

When a task is scheduled out, pending sigtrap deliveries are deferred
to the target task upon resume to userspace via task_work.

However failures while adding an event's callback to the task_work
engine are ignored. And since the last call for events exit happen
after task work is eventually closed, there is a small window during
which pending sigtrap can be queued though ignored, leaking the event
refcount addition such as in the following scenario:

    TASK A
    -----

    do_exit()
       exit_task_work(tsk);

       <IRQ>
       perf_event_overflow()
          event->pending_sigtrap = pending_id;
          irq_work_queue(&event->pending_irq);
       </IRQ>
    =========> PREEMPTION: TASK A -> TASK B
       event_sched_out()
          event->pending_sigtrap = 0;
          atomic_long_inc_not_zero(&event->refcount)
          // FAILS: task work has exited
          task_work_add(&event->pending_task)
       [...]
       <IRQ WORK>
       perf_pending_irq()
          // early return: event->oncpu = -1
       </IRQ WORK>
       [...]
    =========> TASK B -> TASK A
       perf_event_exit_task(tsk)
          perf_event_exit_event()
             free_event()
                WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
                // leak event due to unexpected refcount == 2

As a result the event is never released while the task exits.

Fix this with appropriate task_work_add()'s error handling.

Fixes: 517e6a301f34 ("perf: Fix perf_pending_task() UaF")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-4-frederic@kernel.org

task_work: Introduce task_work_cancel() again

Re-introduce task_work_cancel(), this time to cancel an actual callback
and not *any* callback pointing to a given function. This is going to be
needed for perf events event freeing.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-3-frederic@kernel.org

task_work: s/task_work_cancel()/task_work_cancel_func()/

A proper task_work_cancel() API that actually cancels a callback and not
*any* callback pointing to a given function is going to be needed for
perf events event freeing. Do the appropriate rename to prepare for
that.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-2-frederic@kernel.org

perf/x86/amd/uncore: Fix DF and UMC domain identification

For uncore PMUs, a single context is shared across all CPUs in a domain.
The domain can be a CCX, like in the case of the L3 PMU, or a socket,
like in the case of DF and UMC PMUs. This information is available via
the PMU's cpumask.

For contexts shared across a socket, the domain is currently determined
from topology_die_id() which is incorrect after the introduction of
commit 63edbaa48a57 ("x86/cpu/topology: Add support for the AMD
0x80000026 leaf") as it now returns a CCX identifier on Zen 4 and later
systems which support CPUID leaf 0x80000026.

Use topology_logical_package_id() instead as it always returns a socket
identifier irrespective of the availability of CPUID leaf 0x80000026.

Fixes: 63edbaa48a57 ("x86/cpu/topology: Add support for the AMD 0x80000026 leaf")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240626074942.1044818-1-sandipan.das@amd.com

perf/x86/amd/uncore: Avoid PMU registration if counters are unavailable

X86_FEATURE_PERFCTR_NB and X86_FEATURE_PERFCTR_LLC are derived from
CPUID leaf 0x80000001 ECX bits 24 and 28 respectively and denote the
availability of DF and L3 counters. When these bits are not set, the
corresponding PMUs have no counters and hence, should not be registered.

Fixes: 07888daa056e ("perf/x86/amd/uncore: Move discovery and registration")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240626074404.1044230-1-sandipan.das@amd.com

perf/x86/intel: Support Perfmon MSRs aliasing

The architectural performance monitoring V6 supports a new range of
counters' MSRs in the 19xxH address range. They include all the GP
counter MSRs, the GP control MSRs, and the fixed counter MSRs.

The step between each sibling counter is 4. Add intel_pmu_addr_offset()
to calculate the correct offset.

Add fixedctr in struct x86_pmu to store the address of the fixed counter
0. It can be used to calculate the rest of the fixed counters.

The MSR address of the fixed counter control is not changed.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-9-kan.liang@linux.intel.com

perf/x86/intel: Support PERFEVTSEL extension

Two new fields (the unit mask2, and the equal flag) are added in the
IA32_PERFEVTSELx MSRs. They can be enumerated by the CPUID.23H.0.EBX.

Update the config_mask in x86_pmu and x86_hybrid_pmu for the true layout
of the PERFEVTSEL.
Expose the new formats into sysfs if they are available. The umask
extension reuses the same format attr name "umask" as the previous
umask. Add umask2_show to determine/display the correct format
for the current machine.

Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-8-kan.liang@linux.intel.com

perf/x86: Add config_mask to represent EVENTSEL bitmask

Different vendors may support different fields in EVENTSEL MSR, such as
Intel would introduce new fields umask2 and eq bits in EVENTSEL MSR
since Perfmon version 6. However, a fixed mask X86_RAW_EVENT_MASK is
used to filter the attr.config.

Introduce a new config_mask to record the real supported EVENTSEL
bitmask.
Only apply it to the existing code now. No functional change.

Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-7-kan.liang@linux.intel.com

perf/x86/intel: Support new data source for Lunar Lake

A new PEBS data source format is introduced for the p-core of Lunar
Lake. The data source field is extended to 8 bits with new encodings.

A new layout is introduced into the union intel_x86_pebs_dse.
Introduce the lnl_latency_data() to parse the new format.
Enlarge the pebs_data_source[] accordingly to include new encodings.

Only the mem load and the mem store events can generate the data source.
Introduce INTEL_HYBRID_LDLAT_CONSTRAINT and
INTEL_HYBRID_STLAT_CONSTRAINT to mark them.

Add two new bits for the new cache-related data src, L2_MHB and MSC.
The L2_MHB is short for L2 Miss Handling Buffer, which is similar to
LFB (Line Fill Buffer), but to track the L2 Cache misses.
The MSC stands for the memory-side cache.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-6-kan.liang@linux.intel.com

perf/x86/intel: Rename model-specific pebs_latency_data functions

The model-specific pebs_latency_data functions of ADL and MTL use the
"small" as a postfix to indicate the e-core. The postfix is too generic
for a model-specific function. It cannot provide useful information that
can directly map it to a specific uarch, which can facilitate the
development and maintenance.
Use the abbr of the uarch to rename the model-specific functions.

Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-5-kan.liang@linux.intel.com

perf/x86: Add Lunar Lake and Arrow Lake support

From PMU's perspective, Lunar Lake and Arrow Lake are similar to the
previous generation Meteor Lake. Both are hybrid platforms, with e-core
and p-core.

The key differences include:
- The e-core supports 3 new fixed counters
- The p-core supports an updated PEBS Data Source format
- More GP counters (Updated event constraint table)
- New Architectural performance monitoring V6
(New Perfmon MSRs aliasing, umask2, eq).
- New PEBS format V6 (Counters Snapshotting group)
- New RDPMC metrics clear mode

The legacy features, the 3 new fixed counters and updated event
constraint table are enabled in this patch.

The new PEBS data source format, the architectural performance
monitoring V6, the PEBS format V6, and the new RDPMC metrics clear mode
are supported in the following patches.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-4-kan.liang@linux.intel.com

perf/x86: Support counter mask

The current perf assumes that both GP and fixed counters are contiguous.
But it's not guaranteed on newer Intel platforms or in a virtualization
environment.

Use the counter mask to replace the number of counters for both GP and
the fixed counters. For the other ARCHs or old platforms which don't
support a counter mask, using GENMASK_ULL(num_counter - 1, 0) to
replace. There is no functional change for them.

The interface to KVM is not changed. The number of counters still be
passed to KVM. It can be updated later separately.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-3-kan.liang@linux.intel.com

perf/x86/intel: Support the PEBS event mask

The current perf assumes that the counters that support PEBS are
contiguous. But it's not guaranteed with the new leaf 0x23 introduced.
The counters are enumerated with a counter mask. There may be holes in
the counter mask for future platforms or in a virtualization
environment.

Store the PEBS event mask rather than the maximum number of PEBS
counters in the x86 PMU structures.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-2-kan.liang@linux.intel.com

perf/x86/intel/cstate: Add Lunarlake support

Compared with previous client platforms, PC8 is removed from Lunarlake.
It supports CC1/CC6/CC7 and PC2/PC3/PC6/PC10 residency counters.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240628031758.43103-4-rui.zhang@intel.com

perf/x86/intel/cstate: Add Arrowlake support

Like Alderlake, Arrowlake supports CC1/CC6/CC7 and PC2/PC3/PC6/PC8/PC10.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240628031758.43103-3-rui.zhang@intel.com

perf/x86/intel/cstate: Fix Alderlake/Raptorlake/Meteorlake

For Alderlake, the spec changes after the patch submitted and PC7/PC9
are removed.

Raptorlake and Meteorlake, which copy the Alderlake cstate PMU, also
don't have PC7/PC9.

Remove PC7/PC9 support for Alderlake/Raptorlake/Meteorlake.

Fixes: d0ca946bcf84 ("perf/x86/cstate: Add Alder Lake CPU support")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240628031758.43103-2-rui.zhang@intel.com

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

perf: Make rb_alloc_aux() return an error immediately if nr_pages <= 0

rb_alloc_aux() should not be called with nr_pages <= 0. Make it more robust
and readable by returning an error immediately in that case.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-8-adrian.hunter@intel.com

perf: Fix default aux_watermark calculation

The default aux_watermark is half the AUX area buffer size. In general,
on a 64-bit architecture, the AUX area buffer size could be a bigger than
fits in a 32-bit type, but the calculation does not allow for that
possibility.

However the aux_watermark value is recorded in a u32, so should not be
more than U32_MAX either.

Fix by doing the calculation in a correctly sized type, and limiting the
result to U32_MAX.

Fixes: d68e6799a5c8 ("perf: Cap allocation order at aux_watermark")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-7-adrian.hunter@intel.com

perf: Prevent passing zero nr_pages to rb_alloc_aux()

nr_pages is unsigned long but gets passed to rb_alloc_aux() as an int,
and is stored as an int.

Only power-of-2 values are accepted, so if nr_pages is a 64_bit value, it
will be passed to rb_alloc_aux() as zero.

That is not ideal because:
1. the value is incorrect
2. rb_alloc_aux() is at risk of misbehaving, although it manages to
return -ENOMEM in that case, it is a result of passing zero to get_order()
even though the get_order() result is documented to be undefined in that
case.

Fix by simply validating the maximum supported value in the first place.
Use -ENOMEM error code for consistency with the current error code that
is returned in that case.

Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-6-adrian.hunter@intel.com

perf: Fix perf_aux_size() for greater-than 32-bit size

perf_buffer->aux_nr_pages uses a 32-bit type, so a cast is needed to
calculate a 64-bit size.

Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-5-adrian.hunter@intel.com

perf/x86/intel/pt: Fix pt_topa_entry_for_page() address calculation

Currently, perf allocates an array of page pointers which is limited in
size by MAX_PAGE_ORDER. That in turn limits the maximum Intel PT buffer
size to 2GiB. Should that limitation be lifted, the Intel PT driver can
support larger sizes, except for one calculation in
pt_topa_entry_for_page(), which is limited to 32-bits.

Fix pt_topa_entry_for_page() address calculation by adding a cast.

Fixes: 39152ee51b77 ("perf/x86/intel/pt: Get rid of reverse lookup table for ToPA")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-4-adrian.hunter@intel.com

perf/x86/intel/pt: Fix a topa_entry base address calculation

topa_entry->base is a bit-field. Bit-fields are not promoted to a 64-bit
type, even if the underlying type is 64-bit, and so, if necessary, must
be cast to a larger type when calculations are done.

Fix a topa_entry->base address calculation by adding a cast.

Without the cast, the address was limited to 36-bits i.e. 64GiB.

The address calculation is used on systems that do not support Multiple
Entry ToPA (only Broadwell), and affects physical addresses on or above
64GiB. Instead of writing to the correct address, the address comprising
the first 36 bits would be written to.

Intel PT snapshot and sampling modes are not affected.

Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624201101.60186-3-adrian.hunter@intel.com

perf/x86/intel/pt: Fix topa_entry base length

topa_entry->base needs to store a pfn. It obviously needs to be
large enough to store the largest possible x86 pfn which is
MAXPHYADDR-PAGE_SIZE (52-12). So it is 4 bits too small.

Increase the size of topa_entry->base from 36 bits to 40 bits.

Note, systems where physical addresses can be 256TiB or more are affected.

[ Adrian: Amend commit message as suggested by Dave Hansen ]

Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver")
Signed-off-by: Marco Cavenati <cavenati.marco@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624201101.60186-2-adrian.hunter@intel.com

x86/cpu/intel: Drop stray FAM6 check with new Intel CPU model defines

The outer if () should have been dropped when switching to c->x86_vfm.

Fixes: 6568fc18c2f6 ("x86/cpu/intel: Switch to new Intel CPU model defines")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240529183605.17520-1-andrew.cooper3@citrix.com

x86/cpufeatures: Flip the /proc/cpuinfo appearance logic

I'm getting tired of telling people to put a magic "" in the

#define X86_FEATURE /* "" ... */

comment to hide the new feature flag from the user-visible
/proc/cpuinfo.

Flip the logic to make it explicit: an explicit "<name>" in the comment
adds the flag to /proc/cpuinfo and otherwise not, by default.

Add the "<name>" of all the existing flags to keep backwards
compatibility with userspace.

There should be no functional changes resulting from this.

Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240618113840.24163-1-bp@kernel.org

perf/x86/intel/uncore: Support HBM and CXL PMON counters

Unknown uncore PMON types can be found in both SPR and EMR with HBM or
CXL.

$ls /sys/devices/ | grep type
uncore_type_12_16
uncore_type_12_18
uncore_type_12_2
uncore_type_12_4
uncore_type_12_6
uncore_type_12_8
uncore_type_13_17
uncore_type_13_19
uncore_type_13_3
uncore_type_13_5
uncore_type_13_7
uncore_type_13_9

The unknown PMON types are HBM and CXL PMON. Except for the name, the
other information regarding the HBM and CXL PMON counters can be
retrieved via the discovery table. Add them into the uncores tables for
SPR and EMR.

The event config registers for all CXL related units are 8-byte apart.
Add SPR_UNCORE_MMIO_OFFS8_COMMON_FORMAT to specially handle it.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-9-kan.liang@linux.intel.com

perf/x86/uncore: Cleanup unused unit structure

The unit control and ID information are retrieved from the unit control
RB tree. No one uses the old structure anymore. Remove them.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-8-kan.liang@linux.intel.com

perf/x86/uncore: Apply the unit control RB tree to PCI uncore units

The unit control RB tree has the unit control and unit ID information
for all the PCI units. Use them to replace the box_ctls/pci_offsets to
get an accurate unit control address for PCI uncore units.

The UPI/M3UPI units in the discovery table are ignored. Please see the
commit 65248a9a9ee1 ("perf/x86/uncore: Add a quirk for UPI on SPR").
Manually allocate a unit control RB tree for UPI/M3UPI.
Add cleanup_extra_boxes to release such manual allocation.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-7-kan.liang@linux.intel.com

perf/x86/uncore: Apply the unit control RB tree to MSR uncore units

The unit control RB tree has the unit control and unit ID information
for all the MSR units. Use them to replace the box_ctl and
uncore_msr_box_ctl() to get an accurate unit control address for MSR
uncore units.

Add intel_generic_uncore_assign_hw_event(), which utilizes the accurate
unit control address from the unit control RB tree to calculate the
config_base and event_base.

The unit id related information should be retrieved from the unit
control RB tree as well.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-6-kan.liang@linux.intel.com

perf/x86/uncore: Apply the unit control RB tree to MMIO uncore units

The unit control RB tree has the unit control and unit ID information
for all the units. Use it to replace the box_ctls/mmio_offsets to get
an accurate unit control address for MMIO uncore units.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-5-kan.liang@linux.intel.com

perf/x86/uncore: Retrieve the unit ID from the unit control RB tree

The box_ids only save the unit ID for the first die. If a unit, e.g., a
CXL unit, doesn't exist in the first die. The unit ID cannot be
retrieved.

The unit control RB tree also stores the unit ID information.
Retrieve the unit ID from the unit control RB tree

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-4-kan.liang@linux.intel.com

perf/x86/uncore: Support per PMU cpumask

The cpumask of some uncore units, e.g., CXL uncore units, may be wrong
under some configurations. Perf may access an uncore counter of a
non-existent uncore unit.

The uncore driver assumes that all uncore units are symmetric among
dies. A global cpumask is shared among all uncore PMUs. However, some
CXL uncore units may only be available on some dies.

A per PMU cpumask is introduced to track the CPU mask of this PMU.
The driver searches the unit control RB tree to check whether the PMU is
available on a given die, and updates the per PMU cpumask accordingly.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-3-kan.liang@linux.intel.com

perf/x86/uncore: Save the unit control address of all units

The unit control address of some CXL units may be wrongly calculated
under some configuration on a EMR machine.

The current implementation only saves the unit control address of the
units from the first die, and the first unit of the rest of dies. Perf
assumed that the units from the other dies have the same offset as the
first die. So the unit control address of the rest of the units can be
calculated. However, the assumption is wrong, especially for the CXL
units.

Introduce an RB tree for each uncore type to save the unit control
address and three kinds of ID information (unit ID, PMU ID, and die ID)
for all units.
The unit ID is a physical ID of a unit.
The PMU ID is a logical ID assigned to a unit. The logical IDs start
from 0 and must be contiguous. The physical ID and the logical ID are
1:1 mapping. The units with the same physical ID in different dies share
the same PMU.
The die ID indicates which die a unit belongs to.

The RB tree can be searched by two different keys (unit ID or PMU ID +
die ID). During the RB tree setup, the unit ID is used as a key to look
up the RB tree. The perf can create/assign a proper PMU ID to the unit.
Later, after the RB tree is setup, PMU ID + die ID is used as a key to
look up the RB tree to fill the cpumask of a PMU. It's used more
frequently, so PMU ID + die ID is compared in the unit_less().
The uncore_find_unit() has to be O(N). But the RB tree setup only occurs
once during the driver load time. It should be acceptable.

Compared with the current implementation, more space is required to save
the information of all units. The extra size should be acceptable.
For example, on EMR, there are 221 units at most. For a 2-socket machine,
the extra space is ~6KB at most.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240614134631.1092359-2-kan.liang@linux.intel.com

x86/CPU/AMD: Always inline amd_clear_divider()

The routine is used on syscall exit and on non-AMD CPUs is guaranteed to
be empty.

It probably does not need to be a function call even on CPUs which do need the
mitigation.

[ bp: Make sure it is always inlined so that noinstr marking works. ]

Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240613082637.659133-1-mjguzik@gmail.com

x86/mce/inject: Add missing MODULE_DESCRIPTION() line

make W=1 C=1 warns:

WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/kernel/cpu/mce/mce-inject.o

Add the missing MODULE_DESCRIPTION().

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240530-md-x86-mce-inject-v1-1-2a9dc998f709@quicinc.com

perf/x86/rapl: Switch to new Intel CPU model defines

New CPU #defines encode vendor and family as well as model.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-44-tony.luck%40intel.com

x86/boot: Switch to new Intel CPU model defines

New CPU #defines encode vendor and family as well as model but
boot code doesn't have all the infrastructure to use them. Hard
code the one CPU model number used here.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-35-tony.luck%40intel.com

x86/cpu: Switch to new Intel CPU model defines

New CPU #defines encode vendor and family as well as model.

Update INTEL_CPU_DESC() to work with vendor/family/model.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-34-tony.luck%40intel.com

perf/x86/intel: Switch to new Intel CPU model defines

New CPU #defines encode vendor and family as well as model.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-32-tony.luck%40intel.com

x86/virt/tdx: Switch to new Intel CPU model defines

New CPU #defines encode vendor and family as well as model.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-31-tony.luck%40intel.com

x86/PCI: Switch to new Intel CPU model defines

New CPU #defines encode vendor and family as well as model.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-30-tony.luck%40intel.com

x86/cpu/intel: Switch to new Intel CPU model defines

New CPU #defines encode vendor and family as well as model.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-29-tony.luck%40intel.com

x86/platform/intel-mid: Switch to new Intel CPU model defines

New CPU #defines encode vendor and family as well as model.

N.B. Drop Haswell. CPU model 0x3C was included by mistake
in upstream code.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/all/20240521161002.12866-1-tony.luck%40intel.com

x86/pconfig: Remove unused MKTME pconfig code

Code supporting Intel PCONFIG targets was an early piece of enabling
for MKTME (Multi-Key Total Memory Encryption).

Since MKTME feature enablement did not follow into the kernel, remove
the unused PCONFIG code.

Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/4ddff30d466785b4adb1400f0518783012835141.1715054189.git.alison.schofield%40intel.com

x86/cpu: Remove useless work in detect_tme_early()

TME (Total Memory Encryption) and MKTME (Multi-Key Total Memory
Encryption) BIOS detection were introduced together here [1] and
are loosely coupled in the Intel CPU init code.

TME is a hardware only feature and its BIOS status is all that needs
to be shared with the kernel user: enabled or disabled. The TME
algorithm the BIOS is using and whether or not the kernel recognizes
that algorithm is useless to the kernel user.

MKTME is a hardware feature that requires kernel support. MKTME
detection code was added in advance of broader kernel support for
MKTME that never followed. So, rather than continuing to spew
needless and confusing messages about BIOS MKTME status, remove
most of the MKTME pieces from detect_tme_early().

Keep one useful message: alert the user when BIOS enabled MKTME
reduces the available physical address bits. Recovery of the MKTME
consumed bits requires a reboot with MKTME disabled in BIOS.

There is no functional change for the user, only a change in boot
messages. Below is one example when both TME and MKTME are enabled
in BIOS with AES_XTS_256 which is unknown to the detect tme code.

Before:
[] x86/tme: enabled by BIOS
[] x86/tme: Unknown policy is active: 0x2
[] x86/mktme: No known encryption algorithm is supported: 0x4
[] x86/mktme: enabled by BIOS
[] x86/mktme: 127 KeyIDs available

After:
[] x86/tme: enabled by BIOS
[] x86/mktme: BIOS enable: x86_phys_bits reduced by 8

[1]
commit cb06d8e3d020 ("x86/tme: Detect if TME and MKTME is activated by BIOS")

Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/86dfdf6ced8c9b790f9376bf6c7e22b5608f47c2.1715054189.git.alison.schofield%40intel.com

Linux 6.10-rc1

mm: percpu: Include smp.h in alloc_tag.h

percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.

This fixes a randconfig build error on mips:

include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc22aa3 ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git./linux/kernel/git/perf/perf-tools

Pull perf tool fix from Arnaldo Carvalho de Melo:
"Revert a patch causing a regression.

  This made a simple 'perf record -e cycles:pp make -j199' stop working
  on the Ampere ARM64 system Linus uses to test ARM64 kernels".

* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"

Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"

This reverts commit 617824a7f0f73e4de325cf8add58e55b28c12493.

This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.

The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

- two important netfs integration fixes - including for a data
   corruption and also fixes for multiple xfstests

- reenable swap support over SMB3

* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix missing set of remote_i_size
  cifs: Fix smb3_insert_range() to move the zero_point
  cifs: update internal version number
  smb3: reenable swapfiles over SMB3 mounts

Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git./linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
"16 hotfixes, 11 of which are cc:stable.

  A few nilfs2 fixes, the remainder are for MM: a couple of selftests
  fixes, various singletons fixing various issues in various parts"

* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/ksm: fix possible UAF of stable_node
  mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
  mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
  nilfs2: fix potential hang in nilfs_detach_log_writer()
  nilfs2: fix unexpected freezing of nilfs_segctor_sync()
  nilfs2: fix use-after-free of timer for log writer thread
  selftests/mm: fix build warnings on ppc64
  arm64: patching: fix handling of execmem addresses
  selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
  selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
  selftests/mm: compaction_test: fix bogus test success on Aarch64
  mailmap: update email address for Satya Priya
  mm/huge_memory: don't unpoison huge_zero_folio
  kasan, fortify: properly rename memintrinsics
  lib: add version into /proc/allocinfo output
  mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL

Merge tag 'irq-urgent-2024-05-25' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Ingo Molnar:

- Fix x86 IRQ vector leak caused by a CPU offlining race

- Fix build failure in the riscv-imsic irqchip driver
   caused by an API-change semantic conflict

- Fix use-after-free in irq_find_at_or_after()

* tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()
  genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
  irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict

Merge tag 'x86-urgent-2024-05-25' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:

- Fix regressions of the new x86 CPU VFM (vendor/family/model)
   enumeration/matching code

- Fix crash kernel detection on buggy firmware with
   non-compliant ACPI MADT tables

- Address Kconfig warning

* tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL
  crypto: x86/aes-xts - switch to new Intel CPU model defines
  x86/topology: Handle bogus ACPI tables correctly
  x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y

Merge tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi

Pull ipmi updates from Corey Minyard:
"Mostly updates for deprecated interfaces, platform.remove and
  converting from a tasklet to a BH workqueue.

  Also use HAS_IOPORT for disabling inb()/outb()"

* tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void
  ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void
  ipmi: ipmi_ssif: Convert to platform remove callback returning void
  ipmi: ipmi_si_platform: Convert to platform remove callback returning void
  ipmi: ipmi_powernv: Convert to platform remove callback returning void
  ipmi: bt-bmc: Convert to platform remove callback returning void
  char: ipmi: handle HAS_IOPORT dependencies
  ipmi: Convert from tasklet to BH workqueue

Merge tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
"A series from Xiubo that adds support for additional access checks
  based on MDS auth caps which were recently made available to clients.

  This is needed to prevent scenarios where the MDS quietly discards
  updates that a UID-restricted client previously (wrongfully) acked to
  the user.

  Other than that, just a documentation fixup"

* tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client:
  doc: ceph: update userspace command to get CephFS metadata
  ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit
  ceph: check the cephx mds auth access for async dirop
  ceph: check the cephx mds auth access for open
  ceph: check the cephx mds auth access for setattr
  ceph: add ceph_mds_check_access() helper
  ceph: save cap_auths in MDS client when session is opened

Merge tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3

Pull ntfs3 updates from Konstantin Komarov:
"Fixes:
   - reusing of the file index (could cause the file to be trimmed)
   - infinite dir enumeration
   - taking DOS names into account during link counting
   - le32_to_cpu conversion, 32 bit overflow, NULL check
   - some code was refactored

  Changes:
   - removed max link count info display during driver init

  Remove:
   - atomic_open has been removed for lack of use"

* tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3:
  fs/ntfs3: Break dir enumeration if directory contents error
  fs/ntfs3: Fix case when index is reused during tree transformation
  fs/ntfs3: Mark volume as dirty if xattr is broken
  fs/ntfs3: Always make file nonresident on fallocate call
  fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode
  fs/ntfs3: Use variable length array instead of fixed size
  fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow
  fs/ntfs3: Check 'folio' pointer for NULL
  fs/ntfs3: Missed le32_to_cpu conversion
  fs/ntfs3: Remove max link count info display during driver init
  fs/ntfs3: Taking DOS names into account during link counting
  fs/ntfs3: remove atomic_open
  fs/ntfs3: use kcalloc() instead of kzalloc()

Merge tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd

Pull smb server fixes from Steve French:
"Two ksmbd server fixes, both for stable"

* tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: ignore trailing slashes in share paths
ksmbd: avoid to send duplicate oplock break notifications

Merge tag 'rtc-6.10' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
"There is one new driver and then most of the changes are the device
  tree bindings conversions to yaml.

  New driver:
   - Epson RX8111

  Drivers:
   - Many Device Tree bindings conversions to dtschema
   - pcf8563: wakeup-source support"

* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  pcf8563: add wakeup-source support
  rtc: rx8111: handle VLOW flag
  rtc: rx8111: demote warnings to debug level
  rtc: rx6110: Constify struct regmap_config
  dt-bindings: rtc: convert trivial devices into dtschema
  dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
  dt-bindings: rtc: pxa-rtc: convert to dtschema
  rtc: Add driver for Epson RX8111
  dt-bindings: rtc: Add Epson RX8111
  rtc: mcp795: drop unneeded MODULE_ALIAS
  rtc: nuvoton: Modify part number value
  rtc: test: Split rtc unit test into slow and normal speed test
  dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
  dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
  dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
  dt-bindings: rtc: armada-380-rtc: convert to dtschema
  rtc: cros-ec: provide ID table for avoiding fallback match

Merge tag 'i3c/for-6.10' of git://git./linux/kernel/git/i3c/linux

Pull i3c updates from Alexandre Belloni:
"Runtime PM (power management) is improved and hot-join support has
  been added to the dw controller driver.

  Core:
   - Allow device driver to trigger controller runtime PM

  Drivers:
   - dw: hot-join support
   - svc: better IBI handling"

* tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: dw: Add hot-join support.
  i3c: master: Enable runtime PM for master controller
  i3c: master: svc: fix invalidate IBI type and miss call client IBI handler
  i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame
  i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()

Merge tag 'jffs2-for-linus-6.10-rc1' of git://git./linux/kernel/git/rw/ubifs

Pull jffs2 updates from Richard Weinberger:

- Fix illegal memory access in jffs2_free_inode()

- Kernel-doc fixes

- print symbolic error names

* tag 'jffs2-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  jffs2: Fix potential illegal address access in jffs2_free_inode
  jffs2: Simplify the allocation of slab caches
  jffs2: nodemgmt: fix kernel-doc comments
  jffs2: print symbolic error name instead of error code

Merge tag 'uml-for-linus-6.10-rc1' of git://git./linux/kernel/git/uml/linux

Pull UML updates from Richard Weinberger:

- Fixes for -Wmissing-prototypes warnings and further cleanup

- Remove callback returning void from rtc and virtio drivers

- Fix bash location

* tag 'uml-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (26 commits)
  um: virtio_uml: Convert to platform remove callback returning void
  um: rtc: Convert to platform remove callback returning void
  um: Remove unused do_get_thread_area function
  um: Fix -Wmissing-prototypes warnings for __vdso_*
  um: Add an internal header shared among the user code
  um: Fix the declaration of kasan_map_memory
  um: Fix the -Wmissing-prototypes warning for get_thread_reg
  um: Fix the -Wmissing-prototypes warning for __switch_mm
  um: Fix -Wmissing-prototypes warnings for (rt_)sigreturn
  um: Stop tracking host PID in cpu_tasks
  um: process: remove unused 'n' variable
  um: vector: remove unused len variable/calculation
  um: vector: fix bpfflash parameter evaluation
  um: slirp: remove set but unused variable 'pid'
  um: signal: move pid variable where needed
  um: Makefile: use bash from the environment
  um: Add winch to winch_handlers before registering winch IRQ
  um: Fix -Wmissing-prototypes warnings for __warp_* and foo
  um: Fix -Wmissing-prototypes warnings for text_poke*
  um: Move declarations to proper headers
  ...

Merge tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
"Some fixes for the end of the merge window, mostly amdgpu and panthor,
  with one nouveau uAPI change that fixes a bad decision we made a few
  months back.

  nouveau:
   - fix bo metadata uAPI for vm bind

  panthor:
   - Fixes for panthor's heap logical block.
   - Reset on unrecoverable fault
   - Fix VM references.
   - Reset fix.

  xlnx:
   - xlnx compile and doc fixes.

  amdgpu:
   - Handle vbios table integrated info v2.3

  amdkfd:
   - Handle duplicate BOs in reserve_bo_and_cond_vms
   - Handle memory limitations on small APUs

  dp/mst:
   - MST null deref fix.

  bridge:
   - Don't let next bridge create connector in adv7511 to make probe
     work"

* tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel:
  drm/amdgpu/atomfirmware: add intergrated info v2.3 table
  drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2
  drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs
  drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms
  drm/bridge: adv7511: Attach next bridge without creating connector
  drm/buddy: Fix the warn on's during force merge
  drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations
  drm/panthor: Call panthor_sched_post_reset() even if the reset failed
  drm/panthor: Reset the FW VM to NULL on unplug
  drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level
  drm/panthor: Force an immediate reset on unrecoverable faults
  drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints
  drm/panthor: Fix an off-by-one in the heap context retrieval logic
  drm/panthor: Relax the constraints on the tiler chunk size
  drm/panthor: Make sure the tiler initial/max chunks are consistent
  drm/panthor: Fix tiler OOM handling to allow incremental rendering
  drm: xlnx: zynqmp_dpsub: Fix compilation error
  drm: xlnx: zynqmp_dpsub: Fix few function comments

cifs: Fix missing set of remote_i_size

Occasionally, the generic/001 xfstest will fail indicating corruption in
one of the copy chains when run on cifs against a server that supports
FSCTL_DUPLICATE_EXTENTS_TO_FILE (eg. Samba with a share on btrfs). The
problem is that the remote_i_size value isn't updated by cifs_setsize()
when called by smb2_duplicate_extents(), but i_size *is*.

This may cause cifs_remap_file_range() to then skip the bit after calling
->duplicate_extents() that sets sizes.

Fix this by calling netfs_resize_file() in smb2_duplicate_extents() before
calling cifs_setsize() to set i_size.

This means we don't then need to call netfs_resize_file() upon return from
->duplicate_extents(), but we also fix the test to compare against the pre-dup
inode size.

[Note that this goes back before the addition of remote_i_size with the
netfs_inode struct. It should probably have been setting cifsi->server_eof
previously.]

Fixes: cfc63fc8126a ("smb3: fix cached file size problems in duplicate extents (reflink)")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: Fix smb3_insert_range() to move the zero_point

Fix smb3_insert_range() to move the zero_point over to the new EOF.
Without this, generic/147 fails as reads of data beyond the old EOF point
return zeroes.

Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'mm-stable-2024-05-24-11-49' of git://git./linux/kernel/git/akpm/mm

Pull more mm updates from Andrew Morton:
"Jeff Xu's implementation of the mseal() syscall"

* tag 'mm-stable-2024-05-24-11-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  selftest mm/mseal read-only elf memory segment
  mseal: add documentation
  selftest mm/mseal memory sealing
  mseal: add mseal syscall
  mseal: wire up mseal syscall

mm/ksm: fix possible UAF of stable_node

The commit 2c653d0ee2ae ("ksm: introduce ksm_max_page_sharing per page
deduplication limit") introduced a possible failure case in the
stable_tree_insert(), where we may free the new allocated stable_node_dup
if we fail to prepare the missing chain node.

Then that kfolio return and unlock with a freed stable_node set... And
any MM activities can come in to access kfolio->mapping, so UAF.

Fix it by moving folio_set_stable_node() to the end after stable_node
is inserted successfully.

Link: https://lkml.kernel.org/r/20240513-b4-ksm-stable-node-uaf-v1-1-f687de76f452@linux.dev
Fixes: 2c653d0ee2ae ("ksm: introduce ksm_max_page_sharing per page deduplication limit")
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory-failure: fix handling of dissolved but not taken off from buddy pages

When I did memory failure tests recently, below panic occurs:

page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00
flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff)
raw: 06fffe0000000000 dead000000000100 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000009 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(!PageBuddy(page))
------------[ cut here ]------------
kernel BUG at include/linux/page-flags.h:1009!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:__del_page_from_free_list+0x151/0x180
RSP: 0018:ffffa49c90437998 EFLAGS: 00000046
RAX: 0000000000000035 RBX: 0000000000000009 RCX: ffff8dd8dfd1c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff8dd8dfd1c9c0
RBP: ffffd901233b8000 R08: ffffffffab5511f8 R09: 0000000000008c69
R10: 0000000000003c15 R11: ffffffffab5511f8 R12: ffff8dd8fffc0c80
R13: 0000000000000001 R14: ffff8dd8fffc0c80 R15: 0000000000000009
FS:  00007ff916304740(0000) GS:ffff8dd8dfd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055eae50124c8 CR3: 00000008479e0000 CR4: 00000000000006f0
Call Trace:
<TASK>
__rmqueue_pcplist+0x23b/0x520
get_page_from_freelist+0x26b/0xe40
__alloc_pages_noprof+0x113/0x1120
__folio_alloc_noprof+0x11/0xb0
alloc_buddy_hugetlb_folio.isra.0+0x5a/0x130
__alloc_fresh_hugetlb_folio+0xe7/0x140
alloc_pool_huge_folio+0x68/0x100
set_max_huge_pages+0x13d/0x340
hugetlb_sysctl_handler_common+0xe8/0x110
proc_sys_call_handler+0x194/0x280
vfs_write+0x387/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xc2/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff916114887
RSP: 002b:00007ffec8a2fd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055eae500e350 RCX: 00007ff916114887
RDX: 0000000000000004 RSI: 000055eae500e390 RDI: 0000000000000003
RBP: 000055eae50104c0 R08: 0000000000000000 R09: 000055eae50104c0
R10: 0000000000000077 R11: 0000000000000246 R12: 0000000000000004
R13: 0000000000000004 R14: 00007ff916216b80 R15: 00007ff916216a00
</TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---

And before the panic, there had an warning about bad page state:

BUG: Bad page state in process page-types  pfn:8cee00
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00
flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff)
page_type: 0xffffff7f(buddy)
raw: 06fffe0000000000 ffffd901241c0008 ffffd901240f8008 0000000000000000
raw: 0000000000000000 0000000000000009 00000000ffffff7f 0000000000000000
page dumped because: nonzero mapcount
Modules linked in: mce_inject hwpoison_inject
CPU: 8 PID: 154211 Comm: page-types Not tainted 6.9.0-rc4-00499-g5544ec3178e2-dirty #22
Call Trace:
<TASK>
dump_stack_lvl+0x83/0xa0
bad_page+0x63/0xf0
free_unref_page+0x36e/0x5c0
unpoison_memory+0x50b/0x630
simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110
debugfs_attr_write+0x42/0x60
full_proxy_write+0x5b/0x80
vfs_write+0xcd/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xc2/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f189a514887
RSP: 002b:00007ffdcd899718 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f189a514887
RDX: 0000000000000009 RSI: 00007ffdcd899730 RDI: 0000000000000003
RBP: 00007ffdcd8997a0 R08: 0000000000000000 R09: 00007ffdcd8994b2
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcda199a8
R13: 0000000000404af1 R14: 000000000040ad78 R15: 00007f189a7a5040
</TASK>

The root cause should be the below race:

memory_failure
  try_memory_failure_hugetlb
   me_huge_page
    __page_handle_poison
     dissolve_free_hugetlb_folio
     drain_all_pages -- Buddy page can be isolated e.g. for compaction.
     take_page_off_buddy -- Failed as page is not in the buddy list.
     -- Page can be putback into buddy after compaction.
    page_ref_inc -- Leads to buddy page with refcnt = 1.

Then unpoison_memory() can unpoison the page and send the buddy page back
into buddy list again leading to the above bad page state warning.  And
bad_page() will call page_mapcount_reset() to remove PageBuddy from buddy
page leading to later VM_BUG_ON_PAGE(!PageBuddy(page)) when trying to
allocate this page.

Fix this issue by only treating __page_handle_poison() as successful when
it returns 1.

Link: https://lkml.kernel.org/r/20240523071217.1696196-1-linmiaohe@huawei.com
Fixes: ceaf8fbea79a ("mm, hwpoison: skip raw hwpoison page in freeing 1GB hugepage")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again

After switching smaps_rollup to use VMA iterator, searching for next entry
is part of the condition expression of the do-while loop. So the current
VMA needs to be addressed before the continue statement.

Otherwise, with some VMAs skipped, userspace observed memory
consumption from /proc/pid/smaps_rollup will be smaller than the sum of
the corresponding fields from /proc/pid/smaps.

Link: https://lkml.kernel.org/r/20240523183531.2535436-1-yzhong@purestorage.com
Fixes: c4c84f06285e ("fs/proc/task_mmu: stop using linked list and highest_vm_end")
Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix potential hang in nilfs_detach_log_writer()

Syzbot has reported a potential hang in nilfs_detach_log_writer() called
during nilfs2 unmount.

Analysis revealed that this is because nilfs_segctor_sync(), which
synchronizes with the log writer thread, can be called after
nilfs_segctor_destroy() terminates that thread, as shown in the call trace
below:

nilfs_detach_log_writer
  nilfs_segctor_destroy
    nilfs_segctor_kill_thread  --> Shut down log writer thread
    flush_work
      nilfs_iput_work_func
        nilfs_dispose_list
          iput
            nilfs_evict_inode
              nilfs_transaction_commit
                nilfs_construct_segment (if inode needs sync)
                  nilfs_segctor_sync  --> Attempt to synchronize with
                                          log writer thread
                           *** DEADLOCK ***

Fix this issue by changing nilfs_segctor_sync() so that the log writer
thread returns normally without synchronizing after it terminates, and by
forcing tasks that are already waiting to complete once after the thread
terminates.

The skipped inode metadata flushout will then be processed together in the
subsequent cleanup work in nilfs_segctor_destroy().

Link: https://lkml.kernel.org/r/20240520132621.4054-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+e3973c409251e136fdd0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e3973c409251e136fdd0
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: "Bai, Shuangpeng" <sjb7183@psu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix unexpected freezing of nilfs_segctor_sync()

A potential and reproducible race issue has been identified where
nilfs_segctor_sync() would block even after the log writer thread writes a
checkpoint, unless there is an interrupt or other trigger to resume log
writing.

This turned out to be because, depending on the execution timing of the
log writer thread running in parallel, the log writer thread may skip
responding to nilfs_segctor_sync(), which causes a call to schedule()
waiting for completion within nilfs_segctor_sync() to lose the opportunity
to wake up.

The reason why waking up the task waiting in nilfs_segctor_sync() may be
skipped is that updating the request generation issued using a shared
sequence counter and adding an wait queue entry to the request wait queue
to the log writer, are not done atomically. There is a possibility that
log writing and request completion notification by nilfs_segctor_wakeup()
may occur between the two operations, and in that case, the wait queue
entry is not yet visible to nilfs_segctor_wakeup() and the wake-up of
nilfs_segctor_sync() will be carried over until the next request occurs.

Fix this issue by performing these two operations simultaneously within
the lock section of sc_state_lock. Also, following the memory barrier
guidelines for event waiting loops, move the call to set_current_state()
in the same location into the event waiting loop to ensure that a memory
barrier is inserted just before the event condition determination.

Link: https://lkml.kernel.org/r/20240520132621.4054-3-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3bf ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: "Bai, Shuangpeng" <sjb7183@psu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix use-after-free of timer for log writer thread

Patch series "nilfs2: fix log writer related issues".

This bug fix series covers three nilfs2 log writer-related issues,
including a timer use-after-free issue and potential deadlock issue on
unmount, and a potential freeze issue in event synchronization found
during their analysis. Details are described in each commit log.

This patch (of 3):

A use-after-free issue has been reported regarding the timer sc_timer on
the nilfs_sc_info structure.

The problem is that even though it is used to wake up a sleeping log
writer thread, sc_timer is not shut down until the nilfs_sc_info structure
is about to be freed, and is used regardless of the thread's lifetime.

Fix this issue by limiting the use of sc_timer only while the log writer
thread is alive.

Link: https://lkml.kernel.org/r/20240520132621.4054-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240520132621.4054-2-konishi.ryusuke@gmail.com
Fixes: fdce895ea5dd ("nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: "Bai, Shuangpeng" <sjb7183@psu.edu>
Closes: https://groups.google.com/g/syzkaller/c/MK_LYqtt8ko/m/8rgdWeseAwAJ
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: fix build warnings on ppc64

Fix warnings like:

  In file included from uffd-unit-tests.c:8:
  uffd-unit-tests.c: In function `uffd_poison_handle_fault':
  uffd-common.h:45:33: warning: format `%llu' expects argument of type
  `long long unsigned int', but argument 3 has type `__u64' {aka `long
  unsigned int'} [-Wformat=]

By switching to unsigned long long for u64 for ppc64 builds.

Link: https://lkml.kernel.org/r/20240521030219.57439-1-mpe@ellerman.id.au
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arm64: patching: fix handling of execmem addresses

Klara Modin reported warnings for a kernel configured with BPF_JIT but
without MODULES:

[   44.131296] Trying to vfree() bad address (000000004a17c299)
[   44.138024] WARNING: CPU: 1 PID: 193 at mm/vmalloc.c:3189 remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[   44.146675] CPU: 1 PID: 193 Comm: kworker/1:2 Tainted: G      D W          6.9.0-01786-g2c9e5d4a0082 #25
[   44.158229] Hardware name: Raspberry Pi 3 Model B (DT)
[   44.164433] Workqueue: events bpf_prog_free_deferred
[   44.170492] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   44.178601] pc : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[   44.183705] lr : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[   44.188772] sp : ffff800082a13c70
[   44.193112] x29: ffff800082a13c70 x28: 0000000000000000 x27: 0000000000000000
[   44.201384] x26: 0000000000000000 x25: ffff00003a44efa0 x24: 00000000d4202000
[   44.209658] x23: ffff800081223dd0 x22: ffff00003a198a40 x21: ffff8000814dd880
[   44.217924] x20: 00000000d4202000 x19: ffff8000814dd880 x18: 0000000000000006
[   44.226206] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000002
[   44.234460] x14: ffff8000811a6370 x13: 0000000020000000 x12: 0000000000000000
[   44.242710] x11: ffff8000811a6370 x10: 0000000000000144 x9 : ffff8000811fe370
[   44.250959] x8 : 0000000000017fe8 x7 : 00000000fffff000 x6 : ffff8000811fe370
[   44.259206] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[   44.267457] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000002203240
[   44.275703] Call trace:
[   44.279158] remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[   44.283858] vfree (mm/vmalloc.c:3322)
[   44.287835] execmem_free (mm/execmem.c:70)
[   44.292347] bpf_jit_free_exec+0x10/0x1c
[   44.297283] bpf_prog_pack_free (kernel/bpf/core.c:1006)
[   44.302457] bpf_jit_binary_pack_free (kernel/bpf/core.c:1195)
[   44.307951] bpf_jit_free (include/linux/filter.h:1083 arch/arm64/net/bpf_jit_comp.c:2474)
[   44.312342] bpf_prog_free_deferred (kernel/bpf/core.c:2785)
[   44.317785] process_one_work (kernel/workqueue.c:3273)
[   44.322684] worker_thread (kernel/workqueue.c:3342 (discriminator 2) kernel/workqueue.c:3429 (discriminator 2))
[   44.327292] kthread (kernel/kthread.c:388)
[   44.331342] ret_from_fork (arch/arm64/kernel/entry.S:861)

The problem is because bpf_arch_text_copy() silently fails to write to the
read-only area as a result of patch_map() faulting and the resulting
-EFAULT being chucked away.

Update patch_map() to use CONFIG_EXECMEM instead of
CONFIG_STRICT_MODULE_RWX to check for vmalloc addresses.

Link: https://lkml.kernel.org/r/20240521213813.703309-1-rppt@kernel.org
Fixes: 2c9e5d4a0082 ("bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/all/7983fbbf-0127-457c-9394-8d6e4299c685@gmail.com
Tested-by: Klara Modin <klarasmodin@gmail.com>
Cc: Björn Töpel <bjorn@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation

Reset nr_hugepages to zero before the start of the test.

If a non-zero number of hugepages is already set before the start of the
test, the following problems arise:

- The probability of the test getting OOM-killed increases.  Proof:
   The test wants to run on 80% of available memory to prevent OOM-killing
   (see original code comments).  Let the value of mem_free at the start
   of the test, when nr_hugepages = 0, be x.  In the other case, when
   nr_hugepages > 0, let the memory consumed by hugepages be y.  In the
   former case, the test operates on 0.8 * x of memory.  In the latter,
   the test operates on 0.8 * (x - y) of memory, with y already filled,
   hence, memory consumed is y + 0.8 * (x - y) = 0.8 * x + 0.2 * y > 0.8 *
   x.  Q.E.D

- The probability of a bogus test success increases.  Proof: Let the
   memory consumed by hugepages be greater than 25% of x, with x and y
   defined as above.  The definition of compaction_index is c_index = (x -
   y)/z where z is the memory consumed by hugepages after trying to
   increase them again.  In check_compaction(), we set the number of
   hugepages to zero, and then increase them back; the probability that
   they will be set back to consume at least y amount of memory again is
   very high (since there is not much delay between the two attempts of
   changing nr_hugepages).  Hence, z >= y > (x/4) (by the 25% assumption).
   Therefore, c_index = (x - y)/z <= (x - y)/y = x/y - 1 < 4 - 1 = 3
   hence, c_index can always be forced to be less than 3, thereby the test
   succeeding always.  Q.E.D

Link: https://lkml.kernel.org/r/20240521074358.675031-4-dev.jain@arm.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages

Currently, the test tries to set nr_hugepages to zero, but that is not
actually done because the file offset is not reset after read(). Fix that
using lseek().

Link: https://lkml.kernel.org/r/20240521074358.675031-3-dev.jain@arm.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: compaction_test: fix bogus test success on Aarch64

Patch series "Fixes for compaction_test", v2.

The compaction_test memory selftest introduces fragmentation in memory
and then tries to allocate as many hugepages as possible. This series
addresses some problems.

On Aarch64, if nr_hugepages == 0, then the test trivially succeeds since
compaction_index becomes 0, which is less than 3, due to no division by
zero exception being raised. We fix that by checking for division by
zero.

Secondly, correctly set the number of hugepages to zero before trying
to set a large number of them.

Now, consider a situation in which, at the start of the test, a non-zero
number of hugepages have been already set (while running the entire
selftests/mm suite, or manually by the admin). The test operates on 80%
of memory to avoid OOM-killer invocation, and because some memory is
already blocked by hugepages, it would increase the chance of OOM-killing.
Also, since mem_free used in check_compaction() is the value before we
set nr_hugepages to zero, the chance that the compaction_index will
be small is very high if the preset nr_hugepages was high, leading to a
bogus test success.

This patch (of 3):

Currently, if at runtime we are not able to allocate a huge page, the test
will trivially pass on Aarch64 due to no exception being raised on
division by zero while computing compaction_index.  Fix that by checking
for nr_hugepages == 0.  Anyways, in general, avoid a division by zero by
exiting the program beforehand.  While at it, fix a typo, and handle the
case where the number of hugepages may overflow an integer.

Link: https://lkml.kernel.org/r/20240521074358.675031-1-dev.jain@arm.com
Link: https://lkml.kernel.org/r/20240521074358.675031-2-dev.jain@arm.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: update email address for Satya Priya

Update mailmap with my latest email ID, quic_c_skakit@quicinc.com
is no longer active.

Link: https://lkml.kernel.org/r/20240515-mailmap-update-v1-1-df4853f757a3@quicinc.com
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Cc: Ajit Pandey <quic_ajipan@quicinc.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Imran Shaik <quic_imrashai@quicinc.com>
Cc: Jagadeesh Kona <quic_jkona@quicinc.com>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/huge_memory: don't unpoison huge_zero_folio

When I did memory failure tests recently, below panic occurs:

kernel BUG at include/linux/mm.h:1135!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS:  0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
Call Trace:
  <TASK>
  do_shrink_slab+0x14f/0x6a0
  shrink_slab+0xca/0x8c0
  shrink_node+0x2d0/0x7d0
  balance_pgdat+0x33a/0x720
  kswapd+0x1f3/0x410
  kthread+0xd5/0x100
  ret_from_fork+0x2f/0x50
  ret_from_fork_asm+0x1a/0x30
  </TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS:  0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0

The root cause is that HWPoison flag will be set for huge_zero_folio
without increasing the folio refcnt.  But then unpoison_memory() will
decrease the folio refcnt unexpectedly as it appears like a successfully
hwpoisoned folio leading to VM_BUG_ON_PAGE(page_ref_count(page) == 0) when
releasing huge_zero_folio.

Skip unpoisoning huge_zero_folio in unpoison_memory() to fix this issue.
We're not prepared to unpoison huge_zero_folio yet.

Link: https://lkml.kernel.org/r/20240516122608.22610-1-linmiaohe@huawei.com
Fixes: 478d134e9506 ("mm/huge_memory: do not overkill when splitting huge_zero_page")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan, fortify: properly rename memintrinsics

After commit 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*()
functions") and the follow-up fixes, with CONFIG_FORTIFY_SOURCE enabled,
even though the compiler instruments meminstrinsics by generating calls to
__asan/__hwasan_ prefixed functions, FORTIFY_SOURCE still uses
uninstrumented memset/memmove/memcpy as the underlying functions.

As a result, KASAN cannot detect bad accesses in memset/memmove/memcpy.
This also makes KASAN tests corrupt kernel memory and cause crashes.

To fix this, use __asan_/__hwasan_memset/memmove/memcpy as the underlying
functions whenever appropriate. Do this only for the instrumented code
(as indicated by __SANITIZE_ADDRESS__).

Link: https://lkml.kernel.org/r/20240517130118.759301-1-andrey.konovalov@linux.dev
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Fixes: 51287dcb00cc ("kasan: emit different calls for instrumentable memintrinsics")
Fixes: 36be5cba99f6 ("kasan: treat meminstrinsic as builtins in uninstrumented files")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Reported-by: Nico Pache <npache@redhat.com>
Closes: https://lore.kernel.org/all/20240501144156.17e65021@outsider.home/
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Nico Pache <npache@redhat.com>
Acked-by: Nico Pache <npache@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib: add version into /proc/allocinfo output

Add version string and a header at the beginning of /proc/allocinfo to
allow later format changes.  Example output:

> head /proc/allocinfo
allocinfo - version: 1.0
#     <size>  <calls> <tag info>
           0        0 init/main.c:1314 func:do_initcalls
           0        0 init/do_mounts.c:353 func:mount_nodev_root
           0        0 init/do_mounts.c:187 func:mount_root_generic
           0        0 init/do_mounts.c:158 func:do_mount_root
           0        0 init/initramfs.c:493 func:unpack_to_rootfs
           0        0 init/initramfs.c:492 func:unpack_to_rootfs
           0        0 init/initramfs.c:491 func:unpack_to_rootfs
         512        1 arch/x86/events/rapl.c:681 func:init_rapl_pmus
         128        1 arch/x86/events/rapl.c:571 func:rapl_cpu_online

[akpm@linux-foundation.org: remove stray newline from struct allocinfo_private]
Link: https://lkml.kernel.org/r/20240514163128.3662251-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL

commit a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc")
includes support for __GFP_NOFAIL, but it presents a conflict with commit
dd544141b9eb ("vmalloc: back off when the current task is OOM-killed").  A
possible scenario is as follows:

process-a
__vmalloc_node_range(GFP_KERNEL | __GFP_NOFAIL)
    __vmalloc_area_node()
        vm_area_alloc_pages()
--> oom-killer send SIGKILL to process-a
        if (fatal_signal_pending(current)) break;
--> return NULL;

To fix this, do not check fatal_signal_pending() in vm_area_alloc_pages()
if __GFP_NOFAIL set.

This issue occurred during OPLUS KASAN TEST. Below is part of the log
-> oom-killer sends signal to process
[65731.222840] [ T1308] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/apps/uid_10198,task=gs.intelligence,pid=32454,uid=10198

[65731.259685] [T32454] Call trace:
[65731.259698] [T32454]  dump_backtrace+0xf4/0x118
[65731.259734] [T32454]  show_stack+0x18/0x24
[65731.259756] [T32454]  dump_stack_lvl+0x60/0x7c
[65731.259781] [T32454]  dump_stack+0x18/0x38
[65731.259800] [T32454]  mrdump_common_die+0x250/0x39c [mrdump]
[65731.259936] [T32454]  ipanic_die+0x20/0x34 [mrdump]
[65731.260019] [T32454]  atomic_notifier_call_chain+0xb4/0xfc
[65731.260047] [T32454]  notify_die+0x114/0x198
[65731.260073] [T32454]  die+0xf4/0x5b4
[65731.260098] [T32454]  die_kernel_fault+0x80/0x98
[65731.260124] [T32454]  __do_kernel_fault+0x160/0x2a8
[65731.260146] [T32454]  do_bad_area+0x68/0x148
[65731.260174] [T32454]  do_mem_abort+0x151c/0x1b34
[65731.260204] [T32454]  el1_abort+0x3c/0x5c
[65731.260227] [T32454]  el1h_64_sync_handler+0x54/0x90
[65731.260248] [T32454]  el1h_64_sync+0x68/0x6c

[65731.260269] [T32454]  z_erofs_decompress_queue+0x7f0/0x2258
--> be->decompressed_pages = kvcalloc(be->nr_pages, sizeof(struct page *), GFP_KERNEL | __GFP_NOFAIL);
kernel panic by NULL pointer dereference.
erofs assume kvmalloc with __GFP_NOFAIL never return NULL.
[65731.260293] [T32454]  z_erofs_runqueue+0xf30/0x104c
[65731.260314] [T32454]  z_erofs_readahead+0x4f0/0x968
[65731.260339] [T32454]  read_pages+0x170/0xadc
[65731.260364] [T32454]  page_cache_ra_unbounded+0x874/0xf30
[65731.260388] [T32454]  page_cache_ra_order+0x24c/0x714
[65731.260411] [T32454]  filemap_fault+0xbf0/0x1a74
[65731.260437] [T32454]  __do_fault+0xd0/0x33c
[65731.260462] [T32454]  handle_mm_fault+0xf74/0x3fe0
[65731.260486] [T32454]  do_mem_abort+0x54c/0x1b34
[65731.260509] [T32454]  el0_da+0x44/0x94
[65731.260531] [T32454]  el0t_64_sync_handler+0x98/0xb4
[65731.260553] [T32454]  el0t_64_sync+0x198/0x19c

Link: https://lkml.kernel.org/r/20240510100131.1865-1-hailong.liu@oppo.com
Fixes: 9376130c390a ("mm/vmalloc: add support for __GFP_NOFAIL")
Signed-off-by: Hailong.Liu <hailong.liu@oppo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Barry Song <21cnbao@gmail.com>
Reported-by: Oven <liyangouwen1@oppo.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge tag 'riscv-for-linus-6.10-mw2' of git://git./linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- The compression format used for boot images is now configurable at
   build time, and these formats are shown in `make help`

- access_ok() has been optimized

- A pair of performance bugs have been fixed in the uaccess handlers

- Various fixes and cleanups, including one for the IMSIC build failure
   and one for the early-boot ftrace illegal NOPs bug

* tag 'riscv-for-linus-6.10-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix early ftrace nop patching
  irqchip: riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
  riscv: selftests: Add signal handling vector tests
  riscv: mm: accelerate pagefault when badaccess
  riscv: uaccess: Relax the threshold for fast path
  riscv: uaccess: Allow the last potential unrolled copy
  riscv: typo in comment for get_f64_reg
  Use bool value in set_cpu_online()
  riscv: selftests: Add hwprobe binaries to .gitignore
  riscv: stacktrace: fixed walk_stackframe()
  ftrace: riscv: move from REGS to ARGS
  riscv: do not select MODULE_SECTIONS by default
  riscv: show help string for riscv-specific targets
  riscv: make image compression configurable
  riscv: cpufeature: Fix extension subset checking
  riscv: cpufeature: Fix thead vector hwcap removal
  riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context
  riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled
  riscv: Define TASK_SIZE_MAX for __access_ok()
  riscv: Remove PGDIR_SIZE_L3 and TASK_SIZE_MIN

Merge tag 'for-linus-6.10a-rc1-tag' of git://git./linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

- a small cleanup in the drivers/xen/xenbus Makefile

- a fix of the Xen xenstore driver to improve connecting to a late
   started Xenstore

- an enhancement for better support of ballooning in PVH guests

- a cleanup using try_cmpxchg() instead of open coding it

* tag 'for-linus-6.10a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  drivers/xen: Improve the late XenStore init protocol
  xen/xenbus: Use *-y instead of *-objs in Makefile
  xen/x86: add extra pages to unpopulated-alloc if available
  locking/x86/xen: Use try_cmpxchg() in xen_alloc_p2m_entry()

Merge tag 'for-6.10-tag' of git://git./linux/kernel/git/kdave/linux

Pull more btrfs updates from David Sterba:
"A few more updates, mostly stability fixes or user visible changes:

   - fix race in zoned mode during device replace that can lead to
     use-after-free

   - update return codes and lower message levels for quota rescan where
     it's causing false alerts

   - fix unexpected qgroup id reuse under some conditions

   - fix condition when looking up extent refs

   - add option norecovery (removed in 6.8), the intended replacements
     haven't been used and some aplications still rely on the old one

   - build warning fixes"

* tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: re-introduce 'norecovery' mount option
  btrfs: fix end of tree detection when searching for data extent ref
  btrfs: scrub: initialize ret in scrub_simple_mirror() to fix compilation warning
  btrfs: zoned: fix use-after-free due to race with dev replace
  btrfs: qgroup: fix qgroup id collision across mounts
  btrfs: qgroup: update rescan message levels and error codes

Merge tag 'erofs-for-6.10-rc1-2' of git://git./linux/kernel/git/xiang/erofs

Pull more erofs updates from Gao Xiang:
"The main ones are metadata API conversion to byte offsets by Al Viro.

  Another patch gets rid of unnecessary memory allocation out of DEFLATE
  decompressor. The remaining one is a trivial cleanup.

   - Convert metadata APIs to byte offsets

   - Avoid allocating DEFLATE streams unnecessarily

   - Some erofs_show_options() cleanup"

* tag 'erofs-for-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: avoid allocating DEFLATE streams before mounting
  z_erofs_pcluster_begin(): don't bother with rounding position down
  erofs: don't round offset down for erofs_read_metabuf()
  erofs: don't align offset for erofs_read_metabuf() (simple cases)
  erofs: mechanically convert erofs_read_metabuf() to offsets
  erofs: clean up erofs_show_options()

Merge tag 'bcachefs-2024-05-24' of https://evilpiepirate.org/git/bcachefs

Pull bcachefs fixes from Kent Overstreet:
"Nothing exciting, just syzbot fixes (except for the one
  FMODE_CAN_ODIRECT patch).

  Looks like syzbot reports have slowed down; this is all catch up from
  two weeks of conferences.

  Next hardening project is using Thomas's error injection tooling to
  torture test repair"

* tag 'bcachefs-2024-05-24' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix race path in bch2_inode_insert()
  bcachefs: Ensure we're RW before journalling
  bcachefs: Fix shutdown ordering
  bcachefs: Fix unsafety in bch2_dirent_name_bytes()
  bcachefs: Fix stack oob in __bch2_encrypt_bio()
  bcachefs: Fix btree_trans leak in bch2_readahead()
  bcachefs: Fix bogus verify_replicas_entry() assert
  bcachefs: Check for subvolues with bogus snapshot/inode fields
  bcachefs: bch2_checksum() returns 0 for unknown checksum type
  bcachefs: Fix bch2_alloc_ciphers()
  bcachefs: Add missing guard in bch2_snapshot_has_children()
  bcachefs: Fix missing parens in drop_locks_do()
  bcachefs: Improve bch2_assert_pos_locked()
  bcachefs: Fix shift overflows in replicas.c
  bcachefs: Fix shift overflow in btree_lost_data()
  bcachefs: Fix ref in trans_mark_dev_sbs() error path
  bcachefs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
  bcachefs: Fix rcu splat in check_fix_ptrs()

Merge tag 'input-for-v6.10-rc0' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- a change to input core to trim amount of keys data in modalias string
   in case when a device declares too many keys and they do not fit in
   uevent buffer instead of reporting an error which results in uevent
   not being generated at all

- support for Machenike G5 Pro Controller added to xpad driver

- support for FocalTech FT5452 and FT8719 added to edt-ft5x06

- support for new SPMI vibrator added to pm8xxx-vibrator driver

- missing locking added to cyapa touchpad driver

- removal of unused fields in various driver structures

- explicit initialization of i2c_device_id::driver_data to 0 dropped
   from input drivers

- other assorted fixes and cleanups.

* tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: edt-ft5x06 - add support for FocalTech FT5452 and FT8719
  dt-bindings: input: touchscreen: edt-ft5x06: Document FT5452 and FT8719 support
  Input: xpad - add support for Machenike G5 Pro Controller
  Input: try trimming too long modalias strings
  Input: drop explicit initialization of struct i2c_device_id::driver_data to 0
  Input: zet6223 - remove an unused field in struct zet6223_ts
  Input: chipone_icn8505 - remove an unused field in struct icn8505_data
  Input: cros_ec_keyb - remove an unused field in struct cros_ec_keyb
  Input: lpc32xx-keys - remove an unused field in struct lpc32xx_kscan_drv
  Input: matrix_keypad - remove an unused field in struct matrix_keypad
  Input: tca6416-keypad - remove unused struct tca6416_drv_data
  Input: tca6416-keypad - remove an unused field in struct tca6416_keypad_chip
  Input: da7280 - remove an unused field in struct da7280_haptic
  Input: ff-core - prefer struct_size over open coded arithmetic
  Input: cyapa - add missing input core locking to suspend/resume functions
  input: pm8xxx-vibrator: add new SPMI vibrator support
  dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
  input: pm8xxx-vibrator: refactor to support new SPMI vibrator
  Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation
  Input: sur40 - convert le16 to cpu before use
  ...

Merge tag 'sound-fix-6.10-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.10-rc1. Most of changes are various
  device-specific fixes and quirks, while there are a few small changes
  in ALSA core timer and module / built-in fixes"

* tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 440/460 G11.
  ALSA: core: Enable proc module when CONFIG_MODULES=y
  ALSA: core: Fix NULL module pointer assignment at card init
  ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
  ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string
  ASoC: tas2781: Fix wrong loading calibrated data sequence
  ASoC: tas2552: Add TX path for capturing AUDIO-OUT data
  ALSA: usb-audio: Fix for sampling rates support for Mbox3
  Documentation: sound: Fix trailing whitespaces
  ALSA: timer: Set lower bound of start tick time
  ASoC: codecs: ES8326: solve hp and button detect issue
  ASoC: rt5645: mic-in detection threshold modification
  ASoC: Intel: sof_sdw_rt_sdca_jack_common: Use name_prefix for `-sdca` detection

Merge tag 'char-misc-6.10-rc1-fix' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc fix from Greg KH:
"Here is one remaining bugfix for 6.10-rc1 that missed the 6.9-final
  merge window, and has been sitting in my tree and linux-next for quite
  a while now, but wasn't sent to you (my fault, travels...)

  It is a bugfix to resolve an error in the speakup code that could
  overflow a buffer.

  It has been in linux-next for a while with no reported problems"

* tag 'char-misc-6.10-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  speakup: Fix sizeof() vs ARRAY_SIZE() bug

Merge tag 'tty-6.10-rc1-fixes' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
"Here are some small TTY and Serial driver fixes that missed the
  6.9-final merge window, but have been in my tree for weeks (my fault,
  travel caused me to miss this)

  These fixes include:

   - more n_gsm fixes for reported problems

   - 8520_mtk driver fix

   - 8250_bcm7271 driver fix

   - sc16is7xx driver fix

  All of these have been in linux-next for weeks without any reported
  problems"

* tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler
  serial: 8250_bcm7271: use default_mux_rate if possible
  serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeup
  tty: n_gsm: fix missing receive state reset after mode switch
  tty: n_gsm: fix possible out-of-bounds in gsm0_receive()

Merge tag 'hardening-v6.10-rc1-fixes' of git://git./linux/kernel/git/kees/linux

Pull hardening fixes from Kees Cook:

- loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module
   decompression (Stephen Boyd)

- ubsan: Restore dependency on ARCH_HAS_UBSAN

- kunit/fortify: Fix memcmp() test to be amplitude agnostic

* tag 'hardening-v6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kunit/fortify: Fix memcmp() test to be amplitude agnostic
  ubsan: Restore dependency on ARCH_HAS_UBSAN
  loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module decompression

Merge tag 'trace-tracefs-v6.10' of git://git./linux/kernel/git/trace/linux-trace

Pull tracefs/eventfs updates from Steven Rostedt:
"Bug fixes:

   - The eventfs directories need to have unique inode numbers. Make
     sure that they do not get the default file inode number.

   - Update the inode uid and gid fields on remount.

     When a remount happens where a uid and/or gid is specified, all the
     tracefs files and directories should get the specified uid and/or
     gid. But this can be sporadic when some uids were assigned already.
     There's already a list of inodes that are allocated. Just update
     their uid and gid fields at the time of remount.

   - Update the eventfs_inodes on remount from the top level "events"
     descriptor.

     There was a bug where not all the eventfs files or directories
     where getting updated on remount. One fix was to clear the
     SAVED_UID/GID flags from the inode list during the iteration of the
     inodes during the remount. But because the eventfs inodes can be
     freed when the last referenced is released, not all the
     eventfs_inodes were being updated. This lead to the ownership
     selftest to fail if it was run a second time (the first time would
     leave eventfs_inodes with no corresponding tracefs_inode).

     Instead, for eventfs_inodes, only process the "events"
     eventfs_inode from the list iteration, as it is guaranteed to have
     a tracefs_inode (it's never freed while the "events" directory
     exists). As it has a list of its children, and the children have a
     list of their children, just iterate all the eventfs_inodes from
     the "events" descriptor and it is guaranteed to get all of them.

   - Clear the EVENT_INODE flag from the tracefs_drop_inode() callback.

     Currently the EVENTFS_INODE FLAG is cleared in the tracefs_d_iput()
     callback. But this is the wrong location. The iput() callback is
     called when the last reference to the dentry inode is hit. There
     could be a case where two dentry's have the same inode, and the
     flag will be cleared prematurely. The flag needs to be cleared when
     the last reference of the inode is dropped and that happens in the
     inode's drop_inode() callback handler.

  Cleanups:

   - Consolidate the creation of a tracefs_inode for an eventfs_inode

     A tracefs_inode is created for both files and directories of the
     eventfs system. It is open coded. Instead, consolidate it into a
     single eventfs_get_inode() function call.

   - Remove the eventfs getattr and permission callbacks.

     The permissions for the eventfs files and directories are updated
     when the inodes are created, on remount, and when the user sets
     them (via setattr). The inodes hold the current permissions so
     there is no need to have custom getattr or permissions callbacks as
     they will more likely cause them to be incorrect. The inode's
     permissions are updated when they should be updated. Remove the
     getattr and permissions inode callbacks.

   - Do not update eventfs_inode attributes on creation of inodes.

     The eventfs_inodes attribute field is used to store the permissions
     of the directories and files for when their corresponding inodes
     are freed and are created again. But when the creation of the
     inodes happen, the eventfs_inode attributes are recalculated. The
     recalculation should only happen when the permissions change for a
     given file or directory. Currently, the attribute changes are just
     being set to their current files so this is not a bug, but it's
     unnecessary and error prone. Stop doing that.

   - The events directory inode is created once when the events
     directory is created and deleted when it is deleted. It is now
     updated on remount and when the user changes the permissions.
     There's no need to use the eventfs_inode of the events directory to
     store the events directory permissions. But using it to store the
     default permissions for the files within the directory that have
     not been updated by the user can simplify the code"

* tag 'trace-tracefs-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Do not use attributes for events directory
  eventfs: Cleanup permissions in creation of inodes
  eventfs: Remove getattr and permission callbacks
  eventfs: Consolidate the eventfs_inode update in eventfs_get_inode()
  tracefs: Clear EVENT_INODE flag in tracefs_drop_inode()
  eventfs: Update all the eventfs_inodes from the events descriptor
  tracefs: Update inode permissions on remount
  eventfs: Keep the directories from having the same inode number as files

genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()

irq_find_at_or_after() dereferences the interrupt descriptor which is
returned by mt_find() while neither holding sparse_irq_lock nor RCU read
lock, which means the descriptor can be freed between mt_find() and the
dereference:

    CPU0                            CPU1
    desc = mt_find()
                                    delayed_free_desc(desc)
    irq_desc_get_irq(desc)

The use-after-free is reported by KASAN:

    Call trace:
     irq_get_next_irq+0x58/0x84
     show_stat+0x638/0x824
     seq_read_iter+0x158/0x4ec
     proc_reg_read_iter+0x94/0x12c
     vfs_read+0x1e0/0x2c8

    Freed by task 4471:
     slab_free_freelist_hook+0x174/0x1e0
     __kmem_cache_free+0xa4/0x1dc
     kfree+0x64/0x128
     irq_kobj_release+0x28/0x3c
     kobject_put+0xcc/0x1e0
     delayed_free_desc+0x14/0x2c
     rcu_do_batch+0x214/0x720

Guard the access with a RCU read lock section.

Fixes: 721255b9826b ("genirq: Use a maple tree for interrupt descriptor management")
Signed-off-by: dicken.ding <dicken.ding@mediatek.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240524091739.31611-1-dicken.ding@mediatek.com

fs/ntfs3: Break dir enumeration if directory contents error

If we somehow attempt to read beyond the directory size, an error
is supposed to be returned.

However, in some cases, read requests do not stop and instead enter
into a loop.

To avoid this, we set the position in the directory to the end.

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org

fs/ntfs3: Fix case when index is reused during tree transformation

In most cases when adding a cluster to the directory index,
they are placed at the end, and in the bitmap, this cluster corresponds
to the last bit. The new directory size is calculated as follows:

data_size = (u64)(bit + 1) << indx->index_bits;

In the case of reusing a non-final cluster from the index,
data_size is calculated incorrectly, resulting in the directory size
differing from the actual size.

A check for cluster reuse has been added, and the size update is skipped.

Fixes: 82cae269cfa95 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org

selftest mm/mseal read-only elf memory segment

Sealing read-only of elf mapping so it can't be changed by mprotect.

[jeffxu@chromium.org: style change]
Link: https://lkml.kernel.org/r/20240416220944.2481203-2-jeffxu@chromium.org
[amer.shanawany@gmail.com: fix linker error for inline function]
Link: https://lkml.kernel.org/r/20240420202346.546444-1-amer.shanawany@gmail.com
[jeffxu@chromium.org: fix compile warning]
Link: https://lkml.kernel.org/r/20240420003515.345982-2-jeffxu@chromium.org
[jeffxu@chromium.org: fix arm build]
Link: https://lkml.kernel.org/r/20240502225331.3806279-2-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240415163527.626541-6-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Signed-off-by: Amer Al Shanawany <amer.shanawany@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mseal: add documentation

Add documentation for mseal().

Link: https://lkml.kernel.org/r/20240415163527.626541-5-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftest mm/mseal memory sealing

selftest for memory sealing change in mmap() and mseal().

Link: https://lkml.kernel.org/r/20240415163527.626541-4-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>