Dave Airlie [Thu, 17 Oct 2019 20:10:25 +0000 (06:10 +1000)]
Merge tag 'drm-intel-fixes-2019-10-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Display fix on handling VBT information.
- Important circular locking fix
- Fix for preemption vs resubmission on virtual requests
- and a prep patch to make this last one to apply cleanly
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017135444.GA12255@intel.com
Marek Vasut [Wed, 16 Oct 2019 13:33:24 +0000 (15:33 +0200)]
net: dsa: microchip: Add shared regmap mutex
The KSZ driver uses one regmap per register width (8/16/32), each with
it's own lock, but accessing the same set of registers. In theory, it
is possible to create a race condition between these regmaps, although
the underlying bus (SPI or I2C) locking should assure nothing bad will
really happen and the accesses would be correct.
To make the driver do the right thing, add one single shared mutex for
all the regmaps used by the driver instead. This assures that even if
some future hardware is on a bus which does not serialize the accesses
the same way SPI or I2C does, nothing bad will happen.
Note that the status_mutex was unused and only initied, hence it was
renamed and repurposed as the regmap mutex.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Vasut [Wed, 16 Oct 2019 13:33:23 +0000 (15:33 +0200)]
net: dsa: microchip: Do not reinit mutexes on KSZ87xx
The KSZ87xx driver calls mutex_init() on mutexes already inited in
ksz_common.c ksz_switch_register(). Do not do it twice, drop the
reinitialization.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Dooks (Codethink) [Wed, 16 Oct 2019 08:22:05 +0000 (09:22 +0100)]
net: stmmac: fix argument to stmmac_pcs_ctrl_ane()
The stmmac_pcs_ctrl_ane() expects a register address as
argument 1, but for some reason the mac_device_info is
being passed.
Fix the warning (and possible bug) from sparse:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: expected void [noderef] <asn:2> *ioaddr
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: got struct mac_device_info *hw
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 17 Oct 2019 19:27:29 +0000 (15:27 -0400)]
Merge branch 'dpaa2-eth-misc-fixes'
Ioana Ciornei says:
====================
dpaa2-eth: misc fixes
This patch set adds a couple of fixes around updating configuration on MAC
change. Depending on when MC connects the DPNI to a MAC, both the MAC
address and TX FQIDs should be updated everytime there is a change in
configuration.
Changes in v2:
- used reverse christmas tree ordering in patch 2/2
Changes in v3:
- add a missing new line
- go back to FQ based enqueueing after a transient error
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Radulescu [Wed, 16 Oct 2019 07:36:23 +0000 (10:36 +0300)]
dpaa2-eth: Fix TX FQID values
Depending on when MC connects the DPNI to a MAC, Tx FQIDs may
not be available during probe time.
Read the FQIDs each time the link goes up to avoid using invalid
values. In case an error occurs or an invalid value is retrieved,
fall back to QDID-based enqueueing.
Fixes:
1fa0f68c9255 ("dpaa2-eth: Use FQ-based DPIO enqueue API")
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florin Chiculita [Wed, 16 Oct 2019 07:36:22 +0000 (10:36 +0300)]
dpaa2-eth: add irq for the dpmac connect/disconnect event
Add IRQ for the DPNI endpoint change event, resolving the issue
when a dynamically created DPNI gets a randomly generated hw address
when the endpoint is a DPMAC object.
Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Neukum [Thu, 17 Oct 2019 13:25:47 +0000 (15:25 +0200)]
usb: hso: obey DMA rules in tiocmget
The serial state information must not be embedded into another
data structure, as this interferes with cache handling for DMA
on architectures without cache coherence..
That would result in data corruption on some architectures
Allocating it separately.
v2: fix syntax error
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 17 Oct 2019 18:18:44 +0000 (11:18 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"The main change is that we are reverting blanket enablement of SMBus
mode for devices with Elan touchpads that report BIOS release date as
2018+ because there are older boxes with updated BIOSes that still do
not work well in SMbus mode.
We will have to establish whitelist for SMBus mode it looks like"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: elantech - enable SMBus on new (2018+) systems"
Input: synaptics-rmi4 - avoid processing unknown IRQs
Input: soc_button_array - partial revert of support for newer surface devices
Input: goodix - add support for 9-bytes reports
Input: da9063 - fix capability and drop KEY_SLEEP
Alexandre Belloni [Thu, 17 Oct 2019 14:22:37 +0000 (16:22 +0200)]
coccinelle: api/devm_platform_ioremap_resource: remove useless script
While it is useful for new drivers to use devm_platform_ioremap_resource,
this script is currently used to spam maintainers, often updating very
old drivers. The net benefit is the removal of 2 lines of code in the
driver but the review load for the maintainers is huge. As of now, more
that 560 patches have been sent, some of them obviously broken, as in:
https://lore.kernel.org/lkml/
9bbcce19c777583815c92ce3c2ff2586@www.loen.fr/
Remove the script to reduce the spam.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lukas Wunner [Thu, 17 Oct 2019 15:04:11 +0000 (17:04 +0200)]
ALSA: hda - Force runtime PM on Nvidia HDMI codecs
Przemysław Kopa reports that since commit
b516ea586d71 ("PCI: Enable
NVIDIA HDA controllers"), the discrete GPU Nvidia GeForce GT 540M on his
2011 Samsung laptop refuses to runtime suspend, resulting in a power
regression and excessive heat.
Rivera Valdez witnesses the same issue with a GeForce GT 525M (GF108M)
of the same era, as does another Arch Linux user named "R0AR" with a
more recent GeForce GTX 1050 Ti (GP107M).
The commit exposes the discrete GPU's HDA controller and all four codecs
on the controller do not set the CLKSTOP and EPSS bits in the Supported
Power States Response. They also do not set the PS-ClkStopOk bit in the
Get Power State Response. hda_codec_runtime_suspend() therefore does
not call snd_hdac_codec_link_down(), which prevents each codec and the
PCI device from runtime suspending.
The same issue is present on some AMD discrete GPUs and we addressed it
by forcing runtime PM despite the bits not being set, see commit
57cb54e53bdd ("ALSA: hda - Force to link down at runtime suspend on
ATI/AMD HDMI").
Do the same for Nvidia HDMI codecs.
Fixes:
b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
Link: https://bbs.archlinux.org/viewtopic.php?pid=1865512
Link: https://bugs.freedesktop.org/show_bug.cgi?id=75985#c81
Reported-by: Przemysław Kopa <prymoo@gmail.com>
Reported-by: Rivera Valdez <riveravaldez@ysinembargo.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Drake <dan@reactivated.net>
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/r/3086bc75135c1e3567c5bc4f3cc4ff5cbf7a56c2.1571324194.git.lukas@wunner.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Thu, 17 Oct 2019 15:31:03 +0000 (08:31 -0700)]
Merge tag 'platform-drivers-x86-v5.4-3' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- Users of Intel P-Unit IPC driver might be surprised by harmless
warning. Thus, switch to API which doesn't issue a warning at all.
- I²C multi-instantiate driver continues to add slave devices even when
IRQ resource is not found. For devices in the market IRQ resource is
mandatory, so, fail the ->probe() of the parent driver to avoid
slaves being probed.
- Avoid compiler warning due to unused variable in Classmate laptop
driver.
* tag 'platform-drivers-x86-v5.4-3' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: i2c-multi-instantiate: Fail the probe if no IRQ provided
platform/x86: intel_punit_ipc: Avoid error message when retrieving IRQ
platform/x86: classmate-laptop: remove unused variable
Mikulas Patocka [Wed, 16 Oct 2019 13:21:50 +0000 (09:21 -0400)]
dm cache: fix bugs when a GFP_NOWAIT allocation fails
GFP_NOWAIT allocation can fail anytime - it doesn't wait for memory being
available and it fails if the mempool is exhausted and there is not enough
memory.
If we go down this path:
map_bio -> mg_start -> alloc_migration -> mempool_alloc(GFP_NOWAIT)
we can see that map_bio() doesn't check the return value of mg_start(),
and the bio is leaked.
If we go down this path:
map_bio -> mg_start -> mg_lock_writes -> alloc_prison_cell ->
dm_bio_prison_alloc_cell_v2 -> mempool_alloc(GFP_NOWAIT) ->
mg_lock_writes -> mg_complete
the bio is ended with an error - it is unacceptable because it could
cause filesystem corruption if the machine ran out of memory
temporarily.
Change GFP_NOWAIT to GFP_NOIO, so that the mempool code will properly
wait until memory becomes available. mempool_alloc with GFP_NOIO can't
fail, so remove the code paths that deal with allocation failure.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Linus Torvalds [Thu, 17 Oct 2019 15:08:20 +0000 (08:08 -0700)]
Merge tag 'gpio-v5.4-3' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"The fixes pertain to a problem with initializing the Intel GPIO
irqchips when adding gpiochips.
Andy fixed it up elegantly by adding a hardware initialization
callback to the struct gpio_irq_chip so let's use this. Tested and
verified on the target hardware"
* tag 'gpio-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: lynxpoint: set default handler to be handle_bad_irq()
gpio: merrifield: Move hardware initialization to callback
gpio: lynxpoint: Move hardware initialization to callback
gpio: intel-mid: Move hardware initialization to callback
gpiolib: Initialize the hardware with a callback
gpio: merrifield: Restore use of irq_base
Mark Rutland [Mon, 7 Oct 2019 10:45:36 +0000 (11:45 +0100)]
stop_machine: Avoid potential race behaviour
Both multi_cpu_stop() and set_state() access multi_stop_data::state
racily using plain accesses. These are subject to compiler
transformations which could break the intended behaviour of the code,
and this situation is detected by KCSAN on both arm64 and x86 (splats
below).
Improve matters by using READ_ONCE() and WRITE_ONCE() to ensure that the
compiler cannot elide, replay, or tear loads and stores.
In multi_cpu_stop() the two loads of multi_stop_data::state are expected to
be a consistent value, so snapshot the value into a temporary variable to
ensure this.
The state transitions are serialized by atomic manipulation of
multi_stop_data::num_threads, and other fields in multi_stop_data are not
modified while subject to concurrent reads.
KCSAN splat on arm64:
| BUG: KCSAN: data-race in multi_cpu_stop+0xa8/0x198 and set_state+0x80/0xb0
|
| write to 0xffff00001003bd00 of 4 bytes by task 24 on cpu 3:
| set_state+0x80/0xb0
| multi_cpu_stop+0x16c/0x198
| cpu_stopper_thread+0x170/0x298
| smpboot_thread_fn+0x40c/0x560
| kthread+0x1a8/0x1b0
| ret_from_fork+0x10/0x18
|
| read to 0xffff00001003bd00 of 4 bytes by task 14 on cpu 1:
| multi_cpu_stop+0xa8/0x198
| cpu_stopper_thread+0x170/0x298
| smpboot_thread_fn+0x40c/0x560
| kthread+0x1a8/0x1b0
| ret_from_fork+0x10/0x18
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 1 PID: 14 Comm: migration/1 Not tainted
5.3.0-00007-g67ab35a199f4-dirty #3
| Hardware name: linux,dummy-virt (DT)
KCSAN splat on x86:
| write to 0xffffb0bac0013e18 of 4 bytes by task 19 on cpu 2:
| set_state kernel/stop_machine.c:170 [inline]
| ack_state kernel/stop_machine.c:177 [inline]
| multi_cpu_stop+0x1a4/0x220 kernel/stop_machine.c:227
| cpu_stopper_thread+0x19e/0x280 kernel/stop_machine.c:516
| smpboot_thread_fn+0x1a8/0x300 kernel/smpboot.c:165
| kthread+0x1b5/0x200 kernel/kthread.c:255
| ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:352
|
| read to 0xffffb0bac0013e18 of 4 bytes by task 44 on cpu 7:
| multi_cpu_stop+0xb4/0x220 kernel/stop_machine.c:213
| cpu_stopper_thread+0x19e/0x280 kernel/stop_machine.c:516
| smpboot_thread_fn+0x1a8/0x300 kernel/smpboot.c:165
| kthread+0x1b5/0x200 kernel/kthread.c:255
| ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:352
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 7 PID: 44 Comm: migration/7 Not tainted 5.3.0+ #1
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20191007104536.27276-1-mark.rutland@arm.com
Daniel Drake [Thu, 17 Oct 2019 08:15:01 +0000 (16:15 +0800)]
ALSA: hda/realtek - Enable headset mic on Asus MJ401TA
On Asus MJ401TA (with Realtek ALC256), the headset mic is connected to
pin 0x19, with default configuration value 0x411111f0 (indicating no
physical connection).
Enable this by quirking the pin. Mic jack detection was also tested and
found to be working.
This enables use of the headset mic on this product.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191017081501.17135-1-drake@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Szabolcs Szőke [Fri, 11 Oct 2019 17:19:36 +0000 (19:19 +0200)]
ALSA: usb-audio: Disable quirks for BOSS Katana amplifiers
BOSS Katana amplifiers cannot be used for recording or playback if quirks
are applied
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195223
Signed-off-by: Szabolcs Szőke <szszoke.code@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191011171937.8013-1-szszoke.code@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dmitry Goldin [Wed, 9 Oct 2019 13:42:14 +0000 (13:42 +0000)]
kheaders: substituting --sort in archive creation
The option --sort=ORDER was only introduced in tar 1.28 (2014), which
is rather new and might not be available in some setups.
This patch tries to replicate the previous behaviour as closely as
possible to fix the kheaders build for older environments. It does
not produce identical archives compared to the previous version due
to minor sorting differences but produces reproducible results itself
in my tests.
Reported-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Dmitry Goldin <dgoldin+lkml@protonmail.ch>
Tested-by: Andreas Schwab <schwab@suse.de>
Tested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Biao Huang [Tue, 15 Oct 2019 03:24:44 +0000 (11:24 +0800)]
net: stmmac: disable/enable ptp_ref_clk in suspend/resume flow
disable ptp_ref_clk in suspend flow, and enable it in resume flow.
Fixes:
f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Wed, 16 Oct 2019 02:30:39 +0000 (10:30 +0800)]
net: phy: Fix "link partner" information disappear issue
Some drivers just call phy_ethtool_ksettings_set() to set the
links, for those phy drivers that use genphy_read_status(), if
autoneg is on, and the link is up, than execute "ethtool -s
ethx autoneg on" will cause "link partner" information disappear.
The call trace is phy_ethtool_ksettings_set()->phy_start_aneg()
->linkmode_zero(phydev->lp_advertising)->genphy_read_status(),
the link didn't change, so genphy_read_status() just return, and
phydev->lp_advertising is zero now.
This patch moves the clear operation of lp_advertising from
phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
if autoneg on and autoneg not complete, just clear what the
generic functions care about.
Fixes:
88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 14 Oct 2019 13:04:38 +0000 (06:04 -0700)]
rxrpc: use rcu protection while reading sk->sk_user_data
We need to extend the rcu_read_lock() section in rxrpc_error_report()
and use rcu_dereference_sk_user_data() instead of plain access
to sk->sk_user_data to make sure all rules are respected.
The compiler wont reload sk->sk_user_data at will, and RCU rules
prevent memory beeing freed too soon.
Fixes:
f0308fb07080 ("rxrpc: Fix possible NULL pointer access in ICMP handling")
Fixes:
17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Wilson [Mon, 23 Sep 2019 15:28:42 +0000 (16:28 +0100)]
drm/i915: Fixup preempt-to-busy vs resubmission of a virtual request
As preempt-to-busy leaves the request on the HW as the resubmission is
processed, that request may complete in the background and even cause a
second virtual request to enter queue. This second virtual request
breaks our "single request in the virtual pipeline" assumptions.
Furthermore, as the virtual request may be completed and retired, we
lose the reference the virtual engine assumes is held. Normally, just
removing the request from the scheduler queue removes it from the
engine, but the virtual engine keeps track of its singleton request via
its ve->request. This pointer needs protecting with a reference.
v2: Drop unnecessary motion of rq->engine = owner
Fixes:
22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-1-chris@chris-wilson.co.uk
(cherry picked from commit
b647c7df01b75761b4c0b1cb6f4841088c0b1121)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Sat, 28 Sep 2019 08:25:46 +0000 (09:25 +0100)]
drm/i915/userptr: Never allow userptr into the mappable GGTT
Daniel Vetter uncovered a nasty cycle in using the mmu-notifiers to
invalidate userptr objects which also happen to be pulled into GGTT
mmaps. That is when we unbind the userptr object (on mmu invalidation),
we revoke all CPU mmaps, which may then recurse into mmu invalidation.
We looked for ways of breaking the cycle, but the revocation on
invalidation is required and cannot be avoided. The only solution we
could see was to not allow such GGTT bindings of userptr objects in the
first place. In practice, no one really wants to use a GGTT mmapping of
a CPU pointer...
Just before Daniel's explosive lockdep patches land in v5.4-rc1, we got
a genuine blip from CI:
<4>[ 246.793958] ======================================================
<4>[ 246.793972] WARNING: possible circular locking dependency detected
<4>[ 246.793989]
5.3.0-gbd6c56f50d15-drmtip_372+ #1 Tainted: G U
<4>[ 246.794003] ------------------------------------------------------
<4>[ 246.794017] kswapd0/145 is trying to acquire lock:
<4>[ 246.794030]
000000003f565be6 (&dev->struct_mutex/1){+.+.}, at: userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[ 246.794250]
but task is already holding lock:
<4>[ 246.794263]
000000001799cef9 (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe6/0x2a0
<4>[ 246.794291]
which lock already depends on the new lock.
<4>[ 246.794307]
the existing dependency chain (in reverse order) is:
<4>[ 246.794322]
-> #3 (&anon_vma->rwsem){++++}:
<4>[ 246.794344] down_write+0x33/0x70
<4>[ 246.794357] __vma_adjust+0x3d9/0x7b0
<4>[ 246.794370] __split_vma+0x16a/0x180
<4>[ 246.794385] mprotect_fixup+0x2a5/0x320
<4>[ 246.794399] do_mprotect_pkey+0x208/0x2e0
<4>[ 246.794413] __x64_sys_mprotect+0x16/0x20
<4>[ 246.794429] do_syscall_64+0x55/0x1c0
<4>[ 246.794443] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 246.794456]
-> #2 (&mapping->i_mmap_rwsem){++++}:
<4>[ 246.794478] down_write+0x33/0x70
<4>[ 246.794493] unmap_mapping_pages+0x48/0x130
<4>[ 246.794519] i915_vma_revoke_mmap+0x81/0x1b0 [i915]
<4>[ 246.794519] i915_vma_unbind+0x11d/0x4a0 [i915]
<4>[ 246.794519] i915_vma_destroy+0x31/0x300 [i915]
<4>[ 246.794519] __i915_gem_free_objects+0xb8/0x4b0 [i915]
<4>[ 246.794519] drm_file_free.part.0+0x1e6/0x290
<4>[ 246.794519] drm_release+0xa6/0xe0
<4>[ 246.794519] __fput+0xc2/0x250
<4>[ 246.794519] task_work_run+0x82/0xb0
<4>[ 246.794519] do_exit+0x35b/0xdb0
<4>[ 246.794519] do_group_exit+0x34/0xb0
<4>[ 246.794519] __x64_sys_exit_group+0xf/0x10
<4>[ 246.794519] do_syscall_64+0x55/0x1c0
<4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 246.794519]
-> #1 (&vm->mutex){+.+.}:
<4>[ 246.794519] i915_gem_shrinker_taints_mutex+0x6d/0xe0 [i915]
<4>[ 246.794519] i915_address_space_init+0x9f/0x160 [i915]
<4>[ 246.794519] i915_ggtt_init_hw+0x55/0x170 [i915]
<4>[ 246.794519] i915_driver_probe+0xc9f/0x1620 [i915]
<4>[ 246.794519] i915_pci_probe+0x43/0x1b0 [i915]
<4>[ 246.794519] pci_device_probe+0x9e/0x120
<4>[ 246.794519] really_probe+0xea/0x3d0
<4>[ 246.794519] driver_probe_device+0x10b/0x120
<4>[ 246.794519] device_driver_attach+0x4a/0x50
<4>[ 246.794519] __driver_attach+0x97/0x130
<4>[ 246.794519] bus_for_each_dev+0x74/0xc0
<4>[ 246.794519] bus_add_driver+0x13f/0x210
<4>[ 246.794519] driver_register+0x56/0xe0
<4>[ 246.794519] do_one_initcall+0x58/0x300
<4>[ 246.794519] do_init_module+0x56/0x1f6
<4>[ 246.794519] load_module+0x25bd/0x2a40
<4>[ 246.794519] __se_sys_finit_module+0xd3/0xf0
<4>[ 246.794519] do_syscall_64+0x55/0x1c0
<4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 246.794519]
-> #0 (&dev->struct_mutex/1){+.+.}:
<4>[ 246.794519] __lock_acquire+0x15d8/0x1e90
<4>[ 246.794519] lock_acquire+0xa6/0x1c0
<4>[ 246.794519] __mutex_lock+0x9d/0x9b0
<4>[ 246.794519] userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[ 246.794519] __mmu_notifier_invalidate_range_start+0x85/0x110
<4>[ 246.794519] try_to_unmap_one+0x76b/0x860
<4>[ 246.794519] rmap_walk_anon+0x104/0x280
<4>[ 246.794519] try_to_unmap+0xc0/0xf0
<4>[ 246.794519] shrink_page_list+0x561/0xc10
<4>[ 246.794519] shrink_inactive_list+0x220/0x440
<4>[ 246.794519] shrink_node_memcg+0x36e/0x740
<4>[ 246.794519] shrink_node+0xcb/0x490
<4>[ 246.794519] balance_pgdat+0x241/0x580
<4>[ 246.794519] kswapd+0x16c/0x530
<4>[ 246.794519] kthread+0x119/0x130
<4>[ 246.794519] ret_from_fork+0x24/0x50
<4>[ 246.794519]
other info that might help us debug this:
<4>[ 246.794519] Chain exists of:
&dev->struct_mutex/1 --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem
<4>[ 246.794519] Possible unsafe locking scenario:
<4>[ 246.794519] CPU0 CPU1
<4>[ 246.794519] ---- ----
<4>[ 246.794519] lock(&anon_vma->rwsem);
<4>[ 246.794519] lock(&mapping->i_mmap_rwsem);
<4>[ 246.794519] lock(&anon_vma->rwsem);
<4>[ 246.794519] lock(&dev->struct_mutex/1);
<4>[ 246.794519]
*** DEADLOCK ***
v2: Say no to mmap_ioctl
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111744
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111870
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190928082546.3473-1-chris@chris-wilson.co.uk
(cherry picked from commit
a4311745bba9763e3c965643d4531bd5765b0513)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ville Syrjälä [Fri, 11 Oct 2019 20:20:30 +0000 (23:20 +0300)]
drm/i915: Favor last VBT child device with conflicting AUX ch/DDC pin
The first come first served apporoach to handling the VBT
child device AUX ch conflicts has backfired. We have machines
in the wild where the VBT specifies both port A eDP and
port E DP (in that order) with port E being the real one.
So let's try to flip the preference around and let the last
child device win once again.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Masami Ichikawa <masami256@gmail.com>
Tested-by: Torsten <freedesktop201910@liggy.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111966
Fixes:
36a0f92020dc ("drm/i915/bios: make child device order the priority order")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011202030.8829-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit
41e35ffb380bde1379e4030bb5b2ac824d5139cf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Mon, 23 Sep 2019 11:00:56 +0000 (12:00 +0100)]
drm/i915/execlists: Refactor -EIO markup of hung requests
Pull setting -EIO on the hung requests into its own utility function.
Having allowed ourselves to short-circuit submission of completed
requests, we can now do the mark_eio() prior to submission and avoid
some redundant operations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-4-chris@chris-wilson.co.uk
(cherry picked from commit
0d7cf7bc15e75bf79f2f65d61d19f896609f816a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Mahesh Bandewar [Wed, 16 Oct 2019 07:04:38 +0000 (00:04 -0700)]
Revert "blackhole_netdev: fix syzkaller reported issue"
This reverts commit
b0818f80c8c1bc215bba276bd61c216014fab23b.
Started seeing weird behavior after this patch especially in
the IPv6 code path. Haven't root caused it, but since this was
applied to net branch, taking a precautionary measure to revert
it and look / analyze those failures
Revert this now and I'll send a better fix after analysing / fixing
the weirdness observed.
CC: Eric Dumazet <edumazet@google.com>
CC: Wei Wang <weiwan@google.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will Deacon [Wed, 16 Oct 2019 04:04:18 +0000 (21:04 -0700)]
arm64: tags: Preserve tags for addresses translated via TTBR1
Sign-extending TTBR1 addresses when converting to an untagged address
breaks the documented POSIX semantics for mlock() in some obscure error
cases where we end up returning -EINVAL instead of -ENOMEM as a direct
result of rewriting the upper address bits.
Rework the untagged_addr() macro to preserve the upper address bits for
TTBR1 addresses and only clear the tag bits for user addresses. This
matches the behaviour of the 'clear_address_tag' assembly macro, so
rename that and align the implementations at the same time so that they
use the same instruction sequences for the tag manipulation.
Link: https://lore.kernel.org/stable/20191014162651.GF19200@arrakis.emea.arm.com/
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Mark Rutland [Wed, 16 Oct 2019 11:03:04 +0000 (12:03 +0100)]
arm64: mm: fix inverted PAR_EL1.F check
When detecting a spurious EL1 translation fault, we have the CPU retry
the translation using an AT S1E1R instruction, and inspect PAR_EL1 to
determine if the fault was spurious.
When PAR_EL1.F == 0, the AT instruction successfully translated the
address without a fault, which implies the original fault was spurious.
However, in this case we return false and treat the original fault as if
it was not spurious.
Invert the return value so that we treat such a case as spurious.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes:
42f91093b043 ("arm64: mm: Ignore spurious translation faults taken from the kernel")
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Yang Yingliang [Wed, 16 Oct 2019 03:42:57 +0000 (11:42 +0800)]
arm64: sysreg: fix incorrect definition of SYS_PAR_EL1_F
The 'F' field of the PAR_EL1 register lives in bit 0, not bit 1.
Fix the broken definition in 'sysreg.h'.
Fixes:
e8620cff9994 ("arm64: sysreg: Add some field definitions for PAR_EL1")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Julien Thierry [Tue, 15 Oct 2019 17:25:44 +0000 (18:25 +0100)]
arm64: entry.S: Do not preempt from IRQ before all cpufeatures are enabled
Preempting from IRQ-return means that the task has its PSTATE saved
on the stack, which will get restored when the task is resumed and does
the actual IRQ return.
However, enabling some CPU features requires modifying the PSTATE. This
means that, if a task was scheduled out during an IRQ-return before all
CPU features are enabled, the task might restore a PSTATE that does not
include the feature enablement changes once scheduled back in.
* Task 1:
PAN == 0 ---| |---------------
| |<- return from IRQ, PSTATE.PAN = 0
| <- IRQ |
+--------+ <- preempt() +--
^
|
reschedule Task 1, PSTATE.PAN == 1
* Init:
--------------------+------------------------
^
|
enable_cpu_features
set PSTATE.PAN on all CPUs
Worse than this, since PSTATE is untouched when task switching is done,
a task missing the new bits in PSTATE might affect another task, if both
do direct calls to schedule() (outside of IRQ/exception contexts).
Fix this by preventing preemption on IRQ-return until features are
enabled on all CPUs.
This way the only PSTATE values that are saved on the stack are from
synchronous exceptions. These are expected to be fatal this early, the
exception is BRK for WARN_ON(), but as this uses do_debug_exception()
which keeps IRQs masked, it shouldn't call schedule().
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
[james: Replaced a really cool hack, with an even simpler static key in C.
expanded commit message with Julien's cover-letter ascii art]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Jens Axboe [Wed, 16 Oct 2019 16:49:07 +0000 (10:49 -0600)]
Merge branch 'md-fixes' of https://git./linux/kernel/git/song/md into for-linus
Pull MD fix from Song.
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid0: fix warning message for parameter default_layout
Song Liu [Mon, 14 Oct 2019 23:58:35 +0000 (16:58 -0700)]
md/raid0: fix warning message for parameter default_layout
The message should match the parameter, i.e. raid0.default_layout.
Fixes:
c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc: NeilBrown <neilb@suse.de>
Reported-by: Ivan Topolsky <doktor.yak@gmail.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Ben Dooks [Wed, 16 Oct 2019 11:24:58 +0000 (12:24 +0100)]
kthread: make __kthread_queue_delayed_work static
The __kthread_queue_delayed_work is not exported so
make it static, to avoid the following sparse warning:
kernel/kthread.c:869:6: warning: symbol '__kthread_queue_delayed_work' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Ellerman [Wed, 16 Oct 2019 12:27:32 +0000 (23:27 +1100)]
usercopy: Avoid soft lockups in test_check_nonzero_user()
On a machine with a 64K PAGE_SIZE, the nested for loops in
test_check_nonzero_user() can lead to soft lockups, eg:
watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [modprobe:611]
Modules linked in: test_user_copy(+) vmx_crypto gf128mul crc32c_vpmsum virtio_balloon ip_tables x_tables autofs4
CPU: 4 PID: 611 Comm: modprobe Tainted: G L
5.4.0-rc1-gcc-8.2.0-00001-gf5a1a536fa14-dirty #1151
...
NIP __might_sleep+0x20/0xc0
LR __might_fault+0x40/0x60
Call Trace:
check_zeroed_user+0x12c/0x200
test_user_copy_init+0x67c/0x1210 [test_user_copy]
do_one_initcall+0x60/0x340
do_init_module+0x7c/0x2f0
load_module+0x2d94/0x30e0
__do_sys_finit_module+0xc8/0x150
system_call+0x5c/0x68
Even with a 4K PAGE_SIZE the test takes multiple seconds. Instead
tweak it to only scan a 1024 byte region, but make it cross the
page boundary.
Fixes:
f5a1a536fa14 ("lib: introduce copy_struct_from_user() helper")
Suggested-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191016122732.13467-1-mpe@ellerman.id.au
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Rafael J. Wysocki [Tue, 15 Oct 2019 17:35:20 +0000 (19:35 +0200)]
ACPI: processor: Avoid NULL pointer dereferences at init time
If there are neither processor objects nor processor device objects
in the ACPI tables, the per-CPU processors table will not be
initialized and attempting to dereference pointers from there will
cause the kernel to crash. This happens in acpi_processor_ppc_init()
and acpi_thermal_cpufreq_init() after commit
d15ce412737a ("ACPI:
cpufreq: Switch to QoS requests instead of cpufreq notifier")
which didn't add the requisite NULL pointer checks in there.
Add the NULL pointer checks to acpi_processor_ppc_init() and
acpi_thermal_cpufreq_init(), and to the corresponding "exit"
routines.
While at it, drop redundant return instructions from
acpi_processor_ppc_init() and acpi_thermal_cpufreq_init().
Fixes:
d15ce412737a ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Max Filippov [Wed, 16 Oct 2019 04:51:43 +0000 (21:51 -0700)]
xtensa: fix change_bit in exclusive access option
change_bit implementation for XCHAL_HAVE_EXCLUSIVE case changes all bits
except the one required due to copy-paste error from clear_bit.
Cc: stable@vger.kernel.org # v5.2+
Fixes:
f7c34874f04a ("xtensa: add exclusive atomics support")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Greentime Hu [Tue, 8 Oct 2019 06:45:24 +0000 (14:45 +0800)]
RISC-V: fix virtual address overlapped in FIXADDR_START and VMEMMAP_START
This patch fixes the virtual address layout in pgtable.h. The virtual
address of FIXADDR_START and VMEMMAP_START should not be overlapped.
Fixes:
d95f1a542c3d ("RISC-V: Implement sparsemem")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: fixed patch description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Valentin Vidic [Tue, 15 Oct 2019 20:20:20 +0000 (22:20 +0200)]
net: usb: sr9800: fix uninitialized local variable
Make sure res does not contain random value if the call to
sr_read_cmd fails for some reason.
Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 15 Oct 2019 17:45:47 +0000 (10:45 -0700)]
net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3
The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and
became 6 for GENET v4 and above, account for that difference.
Fixes:
aa09677cba42 ("net: bcmgenet: add MDIO routines")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Dooks (Codethink) [Tue, 15 Oct 2019 16:17:48 +0000 (17:17 +0100)]
net: stmmac: make tc_flow_parsers static
The tc_flow_parsers is not used outside of the driver, so
make it static to avoid the following sparse warning:
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c:516:3: warning: symbol 'tc_flow_parsers' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Dooks (Codethink) [Tue, 15 Oct 2019 16:15:58 +0000 (17:15 +0100)]
davinci_cpdma: make cpdma_chan_split_pool static
The cpdma_chan_split_pool() function is not used outside of
the driver, so make it static to avoid the following sparse
warning:
drivers/net/ethernet/ti/davinci_cpdma.c:725:5: warning: symbol 'cpdma_chan_split_pool' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Bogendoerfer [Tue, 15 Oct 2019 14:42:45 +0000 (16:42 +0200)]
net: i82596: fix dma_alloc_attr for sni_82596
Commit
7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs")
switched dma allocation over to dma_alloc_attr, but didn't convert
the SNI part to request consistent DMA memory. This broke sni_82596
since driver doesn't do dma_cache_sync for performance reasons.
Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596.
Fixes:
7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 15 Oct 2019 07:24:38 +0000 (15:24 +0800)]
sctp: change sctp_prot .no_autobind with true
syzbot reported a memory leak:
BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64):
backtrace:
[...] slab_alloc mm/slab.c:3319 [inline]
[...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483
[...] sctp_bucket_create net/sctp/socket.c:8523 [inline]
[...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270
[...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402
[...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497
[...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022
[...] sctp_setsockopt net/sctp/socket.c:4641 [inline]
[...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611
[...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147
[...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084
[...] __do_sys_setsockopt net/socket.c:2100 [inline]
It was caused by when sending msgs without binding a port, in the path:
inet_sendmsg() -> inet_send_prepare() -> inet_autobind() ->
.get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is
not. Later when binding another port by sctp_setsockopt_bindx(), a new
bucket will be created as bp->port is not set.
sctp's autobind is supposed to call sctp_autobind() where it does all
things including setting bp->port. Since sctp_autobind() is called in
sctp_sendmsg() if the sk is not yet bound, it should have skipped the
auto bind.
THis patch is to avoid calling inet_autobind() in inet_send_prepare()
by changing sctp_prot .no_autobind with true, also remove the unused
.get_port.
Reported-by: syzbot+d44f7bbebdea49dbc84a@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinicius Costa Gomes [Mon, 14 Oct 2019 20:38:22 +0000 (13:38 -0700)]
sched: etf: Fix ordering of packets with same txtime
When a application sends many packets with the same txtime, they may
be transmitted out of order (different from the order in which they
were enqueued).
This happens because when inserting elements into the tree, when the
txtime of two packets are the same, the new packet is inserted at the
left side of the tree, causing the reordering. The only effect of this
change should be that packets with the same txtime will be transmitted
in the order they are enqueued.
The application in question (the AVTP GStreamer plugin, still in
development) is sending video traffic, in which each video frame have
a single presentation time, the problem is that when packetizing,
multiple packets end up with the same txtime.
The receiving side was rejecting packets because they were being
received out of order.
Fixes:
25db26a91364 ("net/sched: Introduce the ETF Qdisc")
Reported-by: Ederson de Souza <ederson.desouza@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 14 Oct 2019 18:22:30 +0000 (11:22 -0700)]
net: avoid potential infinite loop in tc_ctl_action()
tc_ctl_action() has the ability to loop forever if tcf_action_add()
returns -EAGAIN.
This special case has been done in case a module needed to be loaded,
but it turns out that tcf_add_notify() could also return -EAGAIN
if the socket sk_rcvbuf limit is hit.
We need to separate the two cases, and only loop for the module
loading case.
While we are at it, add a limit of 10 attempts since unbounded
loops are always scary.
syzbot repro was something like :
socket(PF_NETLINK, SOCK_RAW|SOCK_NONBLOCK, NETLINK_ROUTE) = 3
write(3, ..., 38) = 38
setsockopt(3, SOL_SOCKET, SO_RCVBUF, [0], 4) = 0
sendmsg(3, {msg_name(0)=NULL, msg_iov(1)=[{..., 388}], msg_controllen=0, msg_flags=0x10}, ...)
NMI backtrace for cpu 0
CPU: 0 PID: 1054 Comm: khungtaskd Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
nmi_cpu_backtrace.cold+0x70/0xb2 lib/nmi_backtrace.c:101
nmi_trigger_cpumask_backtrace+0x23b/0x28b lib/nmi_backtrace.c:62
arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline]
check_hung_uninterruptible_tasks kernel/hung_task.c:205 [inline]
watchdog+0x9d0/0xef0 kernel/hung_task.c:289
kthread+0x361/0x430 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8859 Comm: syz-executor910 Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:arch_local_save_flags arch/x86/include/asm/paravirt.h:751 [inline]
RIP: 0010:lockdep_hardirqs_off+0x1df/0x2e0 kernel/locking/lockdep.c:3453
Code: 5c 08 00 00 5b 41 5c 41 5d 5d c3 48 c7 c0 58 1d f3 88 48 ba 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 0f 85 d3 00 00 00 <48> 83 3d 21 9e 99 07 00 0f 84 b9 00 00 00 9c 58 0f 1f 44 00 00 f6
RSP: 0018:
ffff8880a6f3f1b8 EFLAGS:
00000046
RAX:
1ffffffff11e63ab RBX:
ffff88808c9c6080 RCX:
0000000000000000
RDX:
dffffc0000000000 RSI:
0000000000000000 RDI:
ffff88808c9c6914
RBP:
ffff8880a6f3f1d0 R08:
ffff88808c9c6080 R09:
fffffbfff16be5d1
R10:
fffffbfff16be5d0 R11:
0000000000000003 R12:
ffffffff8746591f
R13:
ffff88808c9c6080 R14:
ffffffff8746591f R15:
0000000000000003
FS:
00000000011e4880(0000) GS:
ffff8880ae900000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffff600400 CR3:
00000000a8920000 CR4:
00000000001406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
trace_hardirqs_off+0x62/0x240 kernel/trace/trace_preemptirq.c:45
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
_raw_spin_lock_irqsave+0x6f/0xcd kernel/locking/spinlock.c:159
__wake_up_common_lock+0xc8/0x150 kernel/sched/wait.c:122
__wake_up+0xe/0x10 kernel/sched/wait.c:142
netlink_unlock_table net/netlink/af_netlink.c:466 [inline]
netlink_unlock_table net/netlink/af_netlink.c:463 [inline]
netlink_broadcast_filtered+0x705/0xb80 net/netlink/af_netlink.c:1514
netlink_broadcast+0x3a/0x50 net/netlink/af_netlink.c:1534
rtnetlink_send+0xdd/0x110 net/core/rtnetlink.c:714
tcf_add_notify net/sched/act_api.c:1343 [inline]
tcf_action_add+0x243/0x370 net/sched/act_api.c:1362
tc_ctl_action+0x3b5/0x4bc net/sched/act_api.c:1410
rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5386
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5404
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:657
___sys_sendmsg+0x803/0x920 net/socket.c:2311
__sys_sendmsg+0x105/0x1d0 net/socket.c:2356
__do_sys_sendmsg net/socket.c:2365 [inline]
__se_sys_sendmsg net/socket.c:2363 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363
do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440939
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+cf0adbb9c28c8866c788@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Nishad Kamdar [Mon, 14 Oct 2019 16:21:20 +0000 (21:51 +0530)]
net: dsa: sja1105: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in header files related to Distributed Switch Architecture
drivers for NXP SJA1105 series Ethernet switch support.
It uses an expilict block comment for the SPDX License
Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 14 Oct 2019 13:47:57 +0000 (06:47 -0700)]
tcp: fix a possible lockdep splat in tcp_done()
syzbot found that if __inet_inherit_port() returns an error,
we call tcp_done() after inet_csk_prepare_forced_close(),
meaning the socket lock is no longer held.
We might fix this in a different way in net-next, but
for 5.4 it seems safer to relax the lockdep check.
Fixes:
d983ea6f16b8 ("tcp: add rcu protection around tp->fastopen_rsk")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 16 Oct 2019 01:03:35 +0000 (18:03 -0700)]
Merge branch 'Update-MT7629-to-support-PHYLINK-API'
MarkLee says:
====================
Update MT7629 to support PHYLINK API
This patch set has two goals :
1. Fix mt7629 GMII mode issue after apply mediatek
PHYLINK support patch.
2. Update mt7629 dts to reflect the latest dt-binding
with PHYLINK support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
MarkLee [Mon, 14 Oct 2019 07:15:18 +0000 (15:15 +0800)]
arm: dts: mediatek: Update mt7629 dts to reflect the latest dt-binding
* Removes mediatek,physpeed property from dtsi that is useless in PHYLINK
* Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit.
* Set gmac1 to gmii mode that connect to a internal gphy
Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MarkLee [Mon, 14 Oct 2019 07:15:17 +0000 (15:15 +0800)]
net: ethernet: mediatek: Fix MT7629 missing GMII mode support
In the original design, mtk_phy_connect function will set ge_mode=1
if phy-mode is GMII(PHY_INTERFACE_MODE_GMII) and then set the correct
ge_mode to ETHSYS_SYSCFG0 register. This logic was broken after apply
mediatek PHYLINK patch(Fixes tag), the new mtk_mac_config function will
not set ge_mode=1 for GMII mode hence the final ETHSYS_SYSCFG0 setting
will be incorrect for mt7629 GMII mode. This patch add the missing logic
back to fix it.
Fixes:
b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support")
Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kai-Heng Feng [Wed, 16 Oct 2019 00:37:37 +0000 (17:37 -0700)]
Revert "Input: elantech - enable SMBus on new (2018+) systems"
This reverts commit
883a2a80f79ca5c0c105605fafabd1f3df99b34c.
Apparently use dmi_get_bios_year() as manufacturing date isn't accurate
and this breaks older laptops with new BIOS update.
So let's revert this patch.
There are still new HP laptops still need to use SMBus to support all
features, but it'll be enabled via a whitelist.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191001070845.9720-1-kai.heng.feng@canonical.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
David S. Miller [Wed, 16 Oct 2019 00:14:48 +0000 (17:14 -0700)]
Merge branch 'mpls-push-pop-fix'
Davide Caratti says:
====================
net/sched: fix wrong behavior of MPLS push/pop action
this series contains two fixes for TC 'act_mpls', that try to address
two problems that can be observed configuring simple 'push' / 'pop'
operations:
- patch 1/2 avoids dropping non-MPLS packets that pass through the MPLS
'pop' action.
- patch 2/2 fixes corruption of the L2 header that occurs when 'push'
or 'pop' actions are configured in TC egress path.
v2: - change commit message in patch 1/2 to better describe that the
patch impacts only TC, thanks to Simon Horman
- fix missing documentation of 'mac_len' in patch 2/2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Sat, 12 Oct 2019 11:55:07 +0000 (13:55 +0200)]
net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions
the following script:
# tc qdisc add dev eth0 clsact
# tc filter add dev eth0 egress protocol ip matchall \
> action mpls push protocol mpls_uc label 0x355aa bos 1
causes corruption of all IP packets transmitted by eth0. On TC egress, we
can't rely on the value of skb->mac_len, because it's 0 and a MPLS 'push'
operation will result in an overwrite of the first 4 octets in the packet
L2 header (e.g. the Destination Address if eth0 is an Ethernet); the same
error pattern is present also in the MPLS 'pop' operation. Fix this error
in act_mpls data plane, computing 'mac_len' as the difference between the
network header and the mac header (when not at TC ingress), and use it in
MPLS 'push'/'pop' core functions.
v2: unbreak 'make htmldocs' because of missing documentation of 'mac_len'
in skb_mpls_pop(), reported by kbuild test robot
CC: Lorenzo Bianconi <lorenzo@kernel.org>
Fixes:
2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Sat, 12 Oct 2019 11:55:06 +0000 (13:55 +0200)]
net: avoid errors when trying to pop MLPS header on non-MPLS packets
the following script:
# tc qdisc add dev eth0 clsact
# tc filter add dev eth0 egress matchall action mpls pop
implicitly makes the kernel drop all packets transmitted by eth0, if they
don't have a MPLS header. This behavior is uncommon: other encapsulations
(like VLAN) just let the packet pass unmodified. Since the result of MPLS
'pop' operation would be the same regardless of the presence / absence of
MPLS header(s) in the original packet, we can let skb_mpls_pop() return 0
when dealing with non-MPLS packets.
For the OVS use-case, this is acceptable because __ovs_nla_copy_actions()
already ensures that MPLS 'pop' operation only occurs with packets having
an MPLS Ethernet type (and there are no other callers in current code, so
the semantic change should be ok).
v2: better documentation of use-cases for skb_mpls_pop(), thanks to Simon
Horman
Fixes:
2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nishad Kamdar [Sat, 12 Oct 2019 13:12:28 +0000 (18:42 +0530)]
net: cavium: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in header files related to Cavium Ethernet drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nishad Kamdar [Sat, 12 Oct 2019 12:18:56 +0000 (17:48 +0530)]
net: dsa: microchip: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in header files related to Distributed Switch Architecture
drivers for Microchip KSZ series switch support.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafael J. Wysocki [Mon, 14 Oct 2019 11:25:00 +0000 (13:25 +0200)]
PCI: PM: Fix pci_power_up()
There is an arbitrary difference between the system resume and
runtime resume code paths for PCI devices regarding the delay to
apply when switching the devices from D3cold to D0.
Namely, pci_restore_standard_config() used in the runtime resume
code path calls pci_set_power_state() which in turn invokes
__pci_start_power_transition() to power up the device through the
platform firmware and that function applies the transition delay
(as per PCI Express Base Specification Revision 2.0, Section 6.6.1).
However, pci_pm_default_resume_early() used in the system resume
code path calls pci_power_up() which doesn't apply the delay at
all and that causes issues to occur during resume from
suspend-to-idle on some systems where the delay is required.
Since there is no reason for that difference to exist, modify
pci_power_up() to follow pci_set_power_state() more closely and
invoke __pci_start_power_transition() from there to call the
platform firmware to power up the device (in case that's necessary).
Fixes:
db288c9c5f9d ("PCI / PM: restore the original behavior of pci_set_power_state()")
Reported-by: Daniel Drake <drake@endlessm.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/linux-pm/CAD8Lp44TYxrMgPLkHCqF9hv6smEurMXvmmvmtyFhZ6Q4SE+dig@mail.gmail.com/T/#m21be74af263c6a34f36e0fc5c77c5449d9406925
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Linus Torvalds [Tue, 15 Oct 2019 21:50:10 +0000 (14:50 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Some minor bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/test: stop device before reset
tools/virtio: xen stub
tools/virtio: more stubs
Max Filippov [Tue, 15 Oct 2019 20:52:03 +0000 (13:52 -0700)]
xtensa: virt: fix PCI IO ports mapping
virt device tree incorrectly uses 0xf0000000 on both sides of PCI IO
ports address space mapping. This results in incorrect port address
assignment in PCI IO BARs and subsequent crash on attempt to access
them. Use 0 as base address in PCI IO ports address space.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Dan Williams [Tue, 15 Oct 2019 19:54:17 +0000 (12:54 -0700)]
libata/ahci: Fix PCS quirk application
Commit
c312ef176399 "libata/ahci: Drop PCS quirk for Denverton and
beyond" got the polarity wrong on the check for which board-ids should
have the quirk applied. The board type board_ahci_pcs7 is defined at the
end of the list such that "pcs7" boards can be special cased in the
future if they need the quirk. All prior Intel board ids "<
board_ahci_pcs7" should proceed with applying the quirk.
Reported-by: Andreas Friedrich <afrie@gmx.net>
Reported-by: Stephen Douthit <stephend@silicom-usa.com>
Fixes:
c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Tue, 15 Oct 2019 19:19:08 +0000 (12:19 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS
(qla2xxx) and two in the core.
The last two are mostly about removing incorrect messages from the
kernel log: the resid message is definitely wrong and the sync cache
on protected drive problem is arguably wrong"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: MAINTAINERS: Update qla2xxx driver
scsi: zfcp: fix reaction on bit error threshold notification
scsi: core: save/restore command resid for error handling
scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry()
scsi: sd: Ignore a failure to sync cache due to lack of authorization
Randy Dunlap [Sat, 12 Oct 2019 04:03:33 +0000 (21:03 -0700)]
net: ethernet: broadcom: have drivers select DIMLIB as needed
NET_VENDOR_BROADCOM is intended to control a kconfig menu only.
It should not have anything to do with code generation.
As such, it should not select DIMLIB for all drivers under
NET_VENDOR_BROADCOM. Instead each driver that needs DIMLIB should
select it (being the symbols SYSTEMPORT, BNXT, and BCMGENET).
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907021810220.13058@ramsan.of.borg/
Fixes:
4f75da3666c0 ("linux/dim: Move implementation to .c files")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Tal Gilboa <talgi@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: netdev@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Sat, 12 Oct 2019 02:43:03 +0000 (20:43 -0600)]
net: Update address for vrf and l3mdev in MAINTAINERS
Use my kernel.org address for all entries in MAINTAINERS.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 11 Oct 2019 19:53:49 +0000 (12:53 -0700)]
net: bcmgenet: Set phydev->dev_flags only for internal PHYs
phydev->dev_flags is entirely dependent on the PHY device driver which
is going to be used, setting the internal GENET PHY revision in those
bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver
being used.
Fixes:
487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Sat, 12 Oct 2019 01:14:55 +0000 (18:14 -0700)]
blackhole_netdev: fix syzkaller reported issue
While invalidating the dst, we assign backhole_netdev instead of
loopback device. However, this device does not have idev pointer
and hence no ip6_ptr even if IPv6 is enabled. Possibly this has
triggered the syzbot reported crash.
The syzbot report does not have reproducer, however, this is the
only device that doesn't have matching idev created.
Crash instruction is :
static inline bool ip6_ignore_linkdown(const struct net_device *dev)
{
const struct inet6_dev *idev = __in6_dev_get(dev);
return !!idev->cnf.ignore_routes_with_linkdown; <= crash
}
Also ipv6 always assumes presence of idev and never checks for it
being NULL (as does the above referenced code). So adding a idev
for the blackhole_netdev to avoid this class of crashes in the future.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 15 Oct 2019 16:56:36 +0000 (09:56 -0700)]
sparc64: disable fast-GUP due to unexplained oopses
HAVE_FAST_GUP enables the lockless quick page table walker for simple
cases, and is a nice optimization for some random loads that can then
use get_user_pages_fast() rather than the more careful page walker.
However, for some unexplained reason, it seems to be subtly broken on
sparc64. The breakage is only with some compiler versions and some
hardware, and nobody seems to have figured out what triggers it,
although there's a simple reprodicer for the problem when it does
trigger.
The problem was introduced with the conversion to the generic GUP code
in commit
7b9afb86b632 ("sparc64: use the generic get_user_pages_fast
code"), but nothing looks obviously wrong in that conversion. It may be
a compiler bug that just hits us with the code reorganization. Or it
may be something very specific to sparc64.
This disables HAVE_FAST_GUP entirely. That makes things like futexes a
bit slower, but at least they work. If we can figure out the trigger,
that would be lovely, but it's been three months already..
Link: https://lore.kernel.org/lkml/20190717215956.GA30369@altlinux.org/
Fixes:
7b9afb86b632 ("sparc64: use the generic get_user_pages_fast code")
Reported-by: Dmitry V Levin <ldv@altlinux.org>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Requested-by: Meelis Roos <mroos@linux.ee>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Tue, 15 Oct 2019 16:40:57 +0000 (12:40 -0400)]
Merge tag 'wireless-drivers-for-davem-2019-10-15' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.4
Second set of fixes for 5.4. ath10k regression and iwlwifi BAD_COMMAND
bug are the ones getting most reports at the moment.
ath10k
* fix throughput regression on QCA98XX
iwlwifi
* fix initialization of 3168 devices (the infamous BAD_COMMAND bug)
* other smaller fixes
rt2x00
* don't include input-polldev.h header
* fix hw reset to work during first 5 minutes of system run
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steven Price [Wed, 9 Oct 2019 09:44:55 +0000 (10:44 +0100)]
drm/panfrost: Handle resetting on timeout better
Panfrost uses multiple schedulers (one for each slot, so 2 in reality),
and on a timeout has to stop all the schedulers to safely perform a
reset. However more than one scheduler can trigger a timeout at the same
time. This race condition results in jobs being freed while they are
still in use.
When stopping other slots use cancel_delayed_work_sync() to ensure that
any timeout started for that slot has completed. Also use
mutex_trylock() to obtain reset_lock. This means that only one thread
attempts the reset, the other threads will simply complete without doing
anything (the first thread will wait for this in the call to
cancel_delayed_work_sync()).
While we're here and since the function is already dependent on
sched_job not being NULL, let's remove the unnecessary checks.
Fixes:
aa20236784ab ("drm/panfrost: Prevent concurrent resets")
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009094456.9704-1-steven.price@arm.com
Linus Torvalds [Tue, 15 Oct 2019 16:37:01 +0000 (09:37 -0700)]
Merge branch 'parisc-5.4-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Fix a parisc-specific fallout of Christoph's
dma_set_mask_and_coherent() patches (Sven)
- Fix a vmap memory leak in ioremap()/ioremap() (Helge)
- Some minor cleanups and documentation updates (Nick, Helge)
* 'parisc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Remove 32-bit DMA enforcement from sba_iommu
parisc: Fix vmap memory leak in ioremap()/iounmap()
parisc: prefer __section from compiler_attributes.h
parisc: sysctl.c: Use CONFIG_PARISC instead of __hppa_ define
MAINTAINERS: Add hp_sdc drivers to parisc arch
Linus Torvalds [Tue, 15 Oct 2019 16:20:07 +0000 (09:20 -0700)]
Merge branch 'dmi-for-linus' of git://git./linux/kernel/git/jdelvare/staging
Pull dmi fix from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Fix unlikely out-of-bounds read in save_mem_devices
Tejun Heo [Tue, 15 Oct 2019 15:49:27 +0000 (08:49 -0700)]
blk-rq-qos: fix first node deletion of rq_qos_del()
rq_qos_del() incorrectly assigns the node being deleted to the head if
it was the first on the list in the !prev path. Fix it by iterating
with ** instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Fixes:
a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tejun Heo [Tue, 15 Oct 2019 16:03:47 +0000 (09:03 -0700)]
blkcg: Fix multiple bugs in blkcg_activate_policy()
blkcg_activate_policy() has the following bugs.
*
cf09a8ee19ad ("blkcg: pass @q and @blkcg into
blkcg_pol_alloc_pd_fn()") added @blkcg to ->pd_alloc_fn(); however,
blkcg_activate_policy() ends up using pd's allocated for the root
blkcg for all preallocations, so ->pd_init_fn() for non-root blkcgs
can be passed in pd's which are allocated for the root blkcg.
For blk-iocost, this means that ->pd_init_fn() can write beyond the
end of the allocated object as it determines the length of the flex
array at the end based on the blkcg's nesting level.
* Each pd is initialized as they get allocated. If alloc fails, the
policy will get freed with pd's initialized on it.
* After the above partial failure, the partial pds are not freed.
This patch fixes all the above issues by
* Restructuring blkcg_activate_policy() so that alloc and init passes
are separate. Init takes place only after all allocs succeeded and
on failure all allocated pds are freed.
* Unifying and fixing the cleanup of the remaining pd_prealloc.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes:
cf09a8ee19ad ("blkcg: pass @q and @blkcg into blkcg_pol_alloc_pd_fn()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Darrick J. Wong [Tue, 15 Oct 2019 15:46:07 +0000 (08:46 -0700)]
xfs: change the seconds fields in xfs_bulkstat to signed
64-bit time is a signed quantity in the kernel, so the bulkstat
structure should reflect that. Note that the structure size stays
the same and that we have not yet published userspace headers for this
new ioctl so there are no users to break.
Fixes:
7035f9724f84 ("xfs: introduce new v5 bulkstat structure")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Dongsheng Yang [Fri, 27 Sep 2019 15:33:22 +0000 (15:33 +0000)]
rbd: cancel lock_dwork if the wait is interrupted
There is a warning message in my test with below steps:
# rbd bench --io-type write --io-size 4K --io-threads 1 --io-pattern rand test &
# sleep 5
# pkill -9 rbd
# rbd map test &
# sleep 5
# pkill rbd
The reason is that the rbd_add_acquire_lock() is interruptable,
that means, when we kill the waiting on ->acquire_wait, the lock_dwork
could be still running.
1. do_rbd_add() 2. lock_dwork
rbd_add_acquire_lock()
- queue_delayed_work()
lock_dwork queued
- wait_for_completion_killable_timeout() <-- kill happen
rbd_dev_image_unlock() <-- UNLOCKED now, nothing to do.
rbd_dev_device_release()
rbd_dev_image_release()
- ...
lock successed here
- cancel_delayed_work_sync(&rbd_dev->lock_dwork)
Then when we reach the rbd_dev_free(), WARN_ON is triggered because
lock_state is not RBD_LOCK_STATE_UNLOCKED.
To fix it, this commit make sure the lock_dwork was finished before
calling rbd_dev_image_unlock().
On the other hand, this would not happend in do_rbd_remove(), because
after rbd mapped, lock_dwork will only be queued for IO request, and
request will continue unless lock_dwork finished. when we call
rbd_dev_image_unlock() in do_rbd_remove(), all requests are done.
That means, lock_state should not be locked again after
rbd_dev_image_unlock().
[ Cancel lock_dwork in rbd_add_acquire_lock(), only if the wait is
interrupted. ]
Fixes:
637cd060537d ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jeff Layton [Thu, 26 Sep 2019 20:05:11 +0000 (16:05 -0400)]
ceph: just skip unrecognized info in ceph_reply_info_extra
In the future, we're going to want to extend the ceph_reply_info_extra
for create replies. Currently though, the kernel code doesn't accept an
extra blob that is larger than the expected data.
Change the code to skip over any unrecognized fields at the end of the
extra blob, rather than returning -EIO.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
yangerkun [Tue, 15 Oct 2019 13:59:29 +0000 (21:59 +0800)]
io_uring: consider the overflow of sequence for timeout req
Now we recalculate the sequence of timeout with 'req->sequence =
ctx->cached_sq_head + count - 1', judge the right place to insert
for timeout_list by compare the number of request we still expected for
completion. But we have not consider about the situation of overflow:
1. ctx->cached_sq_head + count - 1 may overflow. And a bigger count for
the new timeout req can have a small req->sequence.
2. cached_sq_head of now may overflow compare with before req. And it
will lead the timeout req with small req->sequence.
This overflow will lead to the misorder of timeout_list, which can lead
to the wrong order of the completion of timeout_list. Fix it by reuse
req->submit.sequence to store the count, and change the logic of
inserting sort in io_timeout.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Randy Dunlap [Sat, 5 Oct 2019 15:01:59 +0000 (08:01 -0700)]
scripts: setlocalversion: fix a bashism
Fix bashism reported by checkbashisms by using only one '=':
possible bashism in scripts/setlocalversion line 96 (should be 'b = a'):
if [ "`hg log -r . --template '{latesttagdistance}'`" == "1" ]; then
Fixes:
38b3439d84f4 ("setlocalversion: update mercurial tag parsing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Crowe <mcrowe@zipitwireless.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 21 Sep 2019 13:18:46 +0000 (22:18 +0900)]
kbuild: update comment about KBUILD_ALLDIRS
Commit
000ec95fbe75 ("kbuild: pkg: rename scripts/package/Makefile to
scripts/Makefile.package") missed to update this comment.
Fixes:
000ec95fbe75 ("kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.package")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Max Gurtovoy [Sun, 13 Oct 2019 16:57:38 +0000 (19:57 +0300)]
nvme-tcp: fix possible leakage during error flow
During nvme_tcp_setup_cmd_pdu error flow, one must call nvme_cleanup_cmd
since it's symmetric to nvme_setup_cmd.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Max Gurtovoy [Sun, 13 Oct 2019 16:57:37 +0000 (19:57 +0300)]
nvmet-loop: fix possible leakage during error flow
During nvme_loop_queue_rq error flow, one must call nvme_cleanup_cmd since
it's symmetric to nvme_setup_cmd.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Suthikulpanit, Suravee [Mon, 14 Oct 2019 20:06:05 +0000 (20:06 +0000)]
iommu/amd: Fix incorrect PASID decoding from event log
IOMMU Event Log encodes 20-bit PASID for events:
ILLEGAL_DEV_TABLE_ENTRY
IO_PAGE_FAULT
PAGE_TAB_HARDWARE_ERROR
INVALID_DEVICE_REQUEST
as:
PASID[15:0] = bit 47:32
PASID[19:16] = bit 19:16
Note that INVALID_PPR_REQUEST event has different encoding
from the rest of the events as the following:
PASID[15:0] = bit 31:16
PASID[19:16] = bit 45:42
So, fixes the decoding logic.
Fixes:
d64c0486ed50 ("iommu/amd: Update the PASID information printed to the system log")
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Geert Uytterhoeven [Tue, 1 Oct 2019 18:06:22 +0000 (20:06 +0200)]
iommu/ipmmu-vmsa: Only call platform_get_irq() when interrupt is mandatory
As platform_get_irq() now prints an error when the interrupt does not
exist, calling it gratuitously causes scary messages like:
ipmmu-vmsa
e6740000.mmu: IRQ index 0 not found
Fix this by moving the call to platform_get_irq() down, where the
existence of the interrupt is mandatory.
Fixes:
7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Heiko Stuebner [Wed, 25 Sep 2019 18:43:46 +0000 (20:43 +0200)]
iommu/rockchip: Don't use platform_get_irq to implicitly count irqs
Till now the Rockchip iommu driver walked through the irq list via
platform_get_irq() until it encountered an ENXIO error. With the
recent change to add a central error message, this always results
in such an error for each iommu on probe and shutdown.
To not confuse people, switch to platform_count_irqs() to get the
actual number of interrupts before walking through them.
Fixes:
7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Sean Christopherson [Tue, 1 Oct 2019 20:50:19 +0000 (13:50 -0700)]
x86/apic/x2apic: Fix a NULL pointer deref when handling a dying cpu
Check that the per-cpu cluster mask pointer has been set prior to
clearing a dying cpu's bit. The per-cpu pointer is not set until the
target cpu reaches smp_callin() during CPUHP_BRINGUP_CPU, whereas the
teardown function, x2apic_dead_cpu(), is associated with the earlier
CPUHP_X2APIC_PREPARE. If an error occurs before the cpu is awakened,
e.g. if do_boot_cpu() itself fails, x2apic_dead_cpu() will dereference
the NULL pointer and cause a panic.
smpboot: do_boot_cpu failed(-22) to wakeup CPU#1
BUG: kernel NULL pointer dereference, address:
0000000000000008
RIP: 0010:x2apic_dead_cpu+0x1a/0x30
Call Trace:
cpuhp_invoke_callback+0x9a/0x580
_cpu_up+0x10d/0x140
do_cpu_up+0x69/0xb0
smp_init+0x63/0xa9
kernel_init_freeable+0xd7/0x229
? rest_init+0xa0/0xa0
kernel_init+0xa/0x100
ret_from_fork+0x35/0x40
Fixes:
023a611748fd5 ("x86/apic/x2apic: Simplify cluster management")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20191001205019.5789-1-sean.j.christopherson@intel.com
Roman Kagan [Thu, 10 Oct 2019 12:33:05 +0000 (12:33 +0000)]
x86/hyperv: Make vapic support x2apic mode
Now that there's Hyper-V IOMMU driver, Linux can switch to x2apic mode
when supported by the vcpus.
However, the apic access functions for Hyper-V enlightened apic assume
xapic mode only.
As a result, Linux fails to bring up secondary cpus when run as a guest
in QEMU/KVM with both hv_apic and x2apic enabled.
According to Michael Kelley, when in x2apic mode, the Hyper-V synthetic
apic MSRs behave exactly the same as the corresponding architectural
x2apic MSRs, so there's no need to override the apic accessors. The
only exception is hv_apic_eoi_write, which benefits from lazy EOI when
available; however, its implementation works for both xapic and x2apic
modes.
Fixes:
29217a474683 ("iommu/hyper-v: Add Hyper-V stub IOMMU driver")
Fixes:
6b48cb5f8347 ("X86/Hyper-V: Enlighten APIC access")
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20191010123258.16919-1-rkagan@virtuozzo.com
Pavel Tatashin [Mon, 14 Oct 2019 14:48:24 +0000 (10:48 -0400)]
arm64: hibernate: check pgd table allocation
There is a bug in create_safe_exec_page(), when page table is allocated
it is not checked that table is allocated successfully:
But it is dereferenced in: pgd_none(READ_ONCE(*pgdp)). Check that
allocation was successful.
Fixes:
82869ac57b5d ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Will Deacon <will@kernel.org>
Julien Grall [Mon, 14 Oct 2019 10:21:13 +0000 (11:21 +0100)]
arm64: cpufeature: Treat ID_AA64ZFR0_EL1 as RAZ when SVE is not enabled
If CONFIG_ARM64_SVE=n then we fail to report ID_AA64ZFR0_EL1 as 0 when
read by userspace, despite being required by the architecture. Although
this is theoretically a change in ABI, userspace will first check for
the presence of SVE via the HWCAP or the ID_AA64PFR0_EL1.SVE field
before probing the ID_AA64ZFR0_EL1 register. Given that these are
reported correctly for this configuration, we can safely tighten up the
current behaviour.
Ensure ID_AA64ZFR0_EL1 is treated as RAZ when CONFIG_ARM64_SVE=n.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Fixes:
06a916feca2b ("arm64: Expose SVE2 features for userspace")
Signed-off-by: Will Deacon <will@kernel.org>
David S. Miller [Tue, 15 Oct 2019 00:01:53 +0000 (17:01 -0700)]
Merge branch 'aquantia-fixes'
Igor Russkikh says:
====================
Aquantia/Marvell AQtion atlantic driver fixes 10/2019
Here is a set of various bugfixes, to be considered for stable as well.
V2: double space removed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 11 Oct 2019 13:45:23 +0000 (13:45 +0000)]
net: aquantia: correctly handle macvlan and multicast coexistence
macvlan and multicast handling is now mixed up.
The explicit issue is that macvlan interface gets broken (no traffic)
after clearing MULTICAST flag on the real interface.
We now do separate logic and consider both ALLMULTI and MULTICAST
flags on the device.
Fixes:
11ba961c9161 ("net: aquantia: Fix IFF_ALLMULTI flag functionality")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 11 Oct 2019 13:45:22 +0000 (13:45 +0000)]
net: aquantia: do not pass lro session with invalid tcp checksum
Individual descriptors on LRO TCP session should be checked
for CRC errors. It was discovered that HW recalculates
L4 checksums on LRO session and does not break it up on bad L4
csum.
Thus, driver should aggregate HW LRO L4 statuses from all individual
buffers of LRO session and drop packet if one of the buffers has bad
L4 checksum.
Fixes:
f38f1ee8aeb2 ("net: aquantia: check rx csum for all packets in LRO session")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 11 Oct 2019 13:45:20 +0000 (13:45 +0000)]
net: aquantia: when cleaning hw cache it should be toggled
>From HW specification to correctly reset HW caches (this is a required
workaround when stopping the device), register bit should actually
be toggled.
It was previosly always just set. Due to the way driver stops HW this
never actually caused any issues, but it still may, so cleaning this up.
Fixes:
7a1bb49461b1 ("net: aquantia: fix potential IOMMU fault after driver unbind")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 11 Oct 2019 13:45:19 +0000 (13:45 +0000)]
net: aquantia: temperature retrieval fix
Chip temperature is a two byte word, colocated internally with cable
length data. We do all readouts from HW memory by dwords, thus
we should clear extra high bytes, otherwise temperature output
gets weird as soon as we attach a cable to the NIC.
Fixes:
8f8940118654 ("net: aquantia: add infrastructure to readout chip temperature")
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 14 Oct 2019 23:49:59 +0000 (16:49 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge more fixes from Andrew Morton:
"The usual shower of hotfixes and some followups to the recently merged
page_owner enhancements"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/memory-failure: poison read receives SIGKILL instead of SIGBUS if mmaped more than once
mm/slab.c: fix kernel-doc warning for __ksize()
xarray.h: fix kernel-doc warning
bitmap.h: fix kernel-doc warning and typo
fs/fs-writeback.c: fix kernel-doc warning
fs/libfs.c: fix kernel-doc warning
fs/direct-io.c: fix kernel-doc warning
mm, compaction: fix wrong pfn handling in __reset_isolation_pfn()
mm, hugetlb: allow hugepage allocations to reclaim as needed
lib/test_meminit: add a kmem_cache_alloc_bulk() test
mm/slub.c: init_on_free=1 should wipe freelist ptr for bulk allocations
lib/generic-radix-tree.c: add kmemleak annotations
mm/slub: fix a deadlock in show_slab_objects()
mm, page_owner: rename flag indicating that page is allocated
mm, page_owner: decouple freeing stack trace from debug_pagealloc
mm, page_owner: fix off-by-one error in __set_page_owner_handle()
Andy Shevchenko [Wed, 9 Oct 2019 15:59:11 +0000 (18:59 +0300)]
gpio: lynxpoint: set default handler to be handle_bad_irq()
We switch the default handler to be handle_bad_irq() instead of
handle_simple_irq() (which was not correct anyway).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Wed, 9 Oct 2019 15:23:27 +0000 (18:23 +0300)]
gpio: merrifield: Move hardware initialization to callback
The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.
Fixes:
8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Wed, 9 Oct 2019 15:58:45 +0000 (18:58 +0300)]
gpio: lynxpoint: Move hardware initialization to callback
The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.
Fixes:
7b1e889436a1 ("gpio: lynxpoint: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Wed, 9 Oct 2019 15:23:27 +0000 (18:23 +0300)]
gpio: intel-mid: Move hardware initialization to callback
The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.
Fixes:
8069e69a9792 ("gpio: intel-mid: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Wed, 9 Oct 2019 14:34:44 +0000 (17:34 +0300)]
gpiolib: Initialize the hardware with a callback
After changing the drivers to use GPIO core to add an IRQ chip
it appears that some of them requires a hardware initialization
before adding the IRQ chip.
Add an optional callback ->init_hw() to allow that drivers
to initialize hardware if needed.
This change is a part of the fix NULL pointer dereference
brought to the several drivers recently.
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Wed, 9 Oct 2019 15:23:27 +0000 (18:23 +0300)]
gpio: merrifield: Restore use of irq_base
During conversion to internal IRQ chip initialization the commit
8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
lost the irq_base assignment.
drivers/gpio/gpio-merrifield.c: In function ‘mrfld_gpio_probe’:
drivers/gpio/gpio-merrifield.c:405:17: warning: variable ‘irq_base’ set but not used [-Wunused-but-set-variable]
Assign the girq->first to it.
Fixes:
8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Max Filippov [Mon, 14 Oct 2019 22:48:19 +0000 (15:48 -0700)]
xtensa: drop EXPORT_SYMBOL for outs*/ins*
Custom outs*/ins* implementations are long gone from the xtensa port,
remove matching EXPORT_SYMBOLs.
This fixes the following build warnings issued by modpost since commit
15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions"):
WARNING: "insb" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "insw" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "insl" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsb" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsw" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsl" [vmlinux] is a static EXPORT_SYMBOL
Cc: stable@vger.kernel.org
Fixes:
d38efc1f150f ("xtensa: adopt generic io routines")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>