Kuniyuki Iwashima [Mon, 25 Mar 2024 20:24:12 +0000 (13:24 -0700)]
af_unix: Allocate struct unix_edge for each inflight AF_UNIX fd.
As with the previous patch, we preallocate to skb's scm_fp_list an
array of struct unix_edge in the number of inflight AF_UNIX fds.
There we just preallocate memory and do not use immediately because
sendmsg() could fail after this point. The actual use will be in
the next patch.
When we queue skb with inflight edges, we will set the inflight
socket's unix_sock as unix_edge->predecessor and the receiver's
unix_sock as successor, and then we will link the edge to the
inflight socket's unix_vertex.edges.
Note that we set NULL to cloned scm_fp_list.edges in scm_fp_dup()
so that MSG_PEEK does not change the shape of the directed graph.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Mon, 25 Mar 2024 20:24:11 +0000 (13:24 -0700)]
af_unix: Allocate struct unix_vertex for each inflight AF_UNIX fd.
We will replace the garbage collection algorithm for AF_UNIX, where
we will consider each inflight AF_UNIX socket as a vertex and its file
descriptor as an edge in a directed graph.
This patch introduces a new struct unix_vertex representing a vertex
in the graph and adds its pointer to struct unix_sock.
When we send a fd using the SCM_RIGHTS message, we allocate struct
scm_fp_list to struct scm_cookie in scm_fp_copy(). Then, we bump
each refcount of the inflight fds' struct file and save them in
scm_fp_list.fp.
After that, unix_attach_fds() inexplicably clones scm_fp_list of
scm_cookie and sets it to skb. (We will remove this part after
replacing GC.)
Here, we add a new function call in unix_attach_fds() to preallocate
struct unix_vertex per inflight AF_UNIX fd and link each vertex to
skb's scm_fp_list.vertices.
When sendmsg() succeeds later, if the socket of the inflight fd is
still not inflight yet, we will set the preallocated vertex to struct
unix_sock.vertex and link it to a global list unix_unvisited_vertices
under spin_lock(&unix_gc_lock).
If the socket is already inflight, we free the preallocated vertex.
This is to avoid taking the lock unnecessarily when sendmsg() could
fail later.
In the following patch, we will similarly allocate another struct
per edge, which will finally be linked to the inflight socket's
unix_vertex.edges.
And then, we will count the number of edges as unix_vertex.out_degree.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 27 Mar 2024 19:12:06 +0000 (19:12 +0000)]
tcp/dccp: bypass empty buckets in inet_twsk_purge()
TCP ehash table is often sparsely populated.
inet_twsk_purge() spends too much time calling cond_resched().
This patch can reduce time spent in inet_twsk_purge() by 20x.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240327191206.508114-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kurt Kanzenbach [Tue, 26 Mar 2024 11:16:36 +0000 (12:16 +0100)]
net: dsa: hellcreek: Convert to gettimex64()
As of commit
916444df305e ("ptp: deprecate gettime64() in favor of
gettimex64()") (new) PTP drivers should rather implement gettimex64().
In addition, this variant provides timestamps from the system clock. The
readings have to be recorded right before and after reading the lowest bits
of the PHC timestamp.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Tue, 26 Mar 2024 07:29:52 +0000 (15:29 +0800)]
net/smc: make smc_hash_sk/smc_unhash_sk static
smc_hash_sk and smc_unhash_sk are only used in af_smc.c, so make them
static and remove the output symbol. They can be called under the path
.prot->hash()/unhash().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 29 Mar 2024 09:46:39 +0000 (09:46 +0000)]
Merge branch 'net-sched-skip_sw'
Asbjørn Sloth Tønnesen says:
====================
make skip_sw actually skip software
During development of flower-route[1], which I
recently presented at FOSDEM[2], I noticed that
CPU usage, would increase the more rules I installed
into the hardware for IP forwarding offloading.
Since we use TC flower offload for the hottest
prefixes, and leave the long tail to the normal (non-TC)
Linux network stack for slow-path IP forwarding.
We therefore need both the hardware and software
datapath to perform well.
I found that skip_sw rules, are quite expensive
in the kernel datapath, since they must be evaluated
and matched upon, before the kernel checks the
skip_sw flag.
This patchset optimizes the case where all rules
are skip_sw, by implementing a TC bypass for these
cases, where TC is only used as a control plane
for the hardware path.
v4:
- Rebased onto net-next, now that net-next is open again
v3: https://lore.kernel.org/netdev/
20240306165813.656931-1-ast@fiberby.net/
- Patch 3:
- Fix source_inline
- Fix build failure, when CONFIG_NET_CLS without CONFIG_NET_CLS_ACT.
v2: https://lore.kernel.org/netdev/
20240305144404.569632-1-ast@fiberby.net/
- Patch 1:
- Add Reviewed-By from Jiri Pirko
- Patch 2:
- Move code, to avoid forward declaration (Jiri).
- Patch 3
- Refactor to use a static key.
- Add performance data for trapping, or sending
a packet to a non-existent chain (as suggested by Marcelo).
v1: https://lore.kernel.org/netdev/
20240215160458.
1727237-1-ast@fiberby.net/
[1] flower-route
https://github.com/fiberby-dk/flower-route
[2] FOSDEM talk
https://fosdem.org/2024/schedule/event/fosdem-2024-3337-flying-higher-hardware-offloading-with-bird/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Asbjørn Sloth Tønnesen [Mon, 25 Mar 2024 20:47:36 +0000 (20:47 +0000)]
net: sched: make skip_sw actually skip software
TC filters come in 3 variants:
- no flag (try to process in hardware, but fallback to software))
- skip_hw (do not process filter by hardware)
- skip_sw (do not process filter by software)
However skip_sw is implemented so that the skip_sw
flag can first be checked, after it has been matched.
IMHO it's common when using skip_sw, to use it on all rules.
So if all filters in a block is skip_sw filters, then
we can bail early, we can thus avoid having to match
the filters, just to check for the skip_sw flag.
This patch adds a bypass, for when only TC skip_sw rules
are used. The bypass is guarded by a static key, to avoid
harming other workloads.
There are 3 ways that a packet from a skip_sw ruleset, can
end up in the kernel path. Although the send packets to a
non-existent chain way is only improved a few percents, then
I believe it's worth optimizing the trap and fall-though
use-cases.
+----------------------------+--------+--------+--------+
| Test description | Pre- | Post- | Rel. |
| | kpps | kpps | chg. |
+----------------------------+--------+--------+--------+
| basic forwarding + notrack | 3589.3 | 3587.9 | 1.00x |
| switch to eswitch mode | 3081.8 | 3094.7 | 1.00x |
| add ingress qdisc | 3042.9 | 3063.6 | 1.01x |
| tc forward in hw / skip_sw |37024.7 |37028.4 | 1.00x |
| tc forward in sw / skip_hw | 3245.0 | 3245.3 | 1.00x |
+----------------------------+--------+--------+--------+
| tests with only skip_sw rules below: |
+----------------------------+--------+--------+--------+
| 1 non-matching rule | 2694.7 | 3058.7 | 1.14x |
| 1 n-m rule, match trap | 2611.2 | 3323.1 | 1.27x |
| 1 n-m rule, goto non-chain | 2886.8 | 2945.9 | 1.02x |
| 5 non-matching rules | 1958.2 | 3061.3 | 1.56x |
| 5 n-m rules, match trap | 1911.9 | 3327.0 | 1.74x |
| 5 n-m rules, goto non-chain| 2883.1 | 2947.5 | 1.02x |
| 10 non-matching rules | 1466.3 | 3062.8 | 2.09x |
| 10 n-m rules, match trap | 1444.3 | 3317.9 | 2.30x |
| 10 n-m rules,goto non-chain| 2883.1 | 2939.5 | 1.02x |
| 25 non-matching rules | 838.5 | 3058.9 | 3.65x |
| 25 n-m rules, match trap | 824.5 | 3323.0 | 4.03x |
| 25 n-m rules,goto non-chain| 2875.8 | 2944.7 | 1.02x |
| 50 non-matching rules | 488.1 | 3054.7 | 6.26x |
| 50 n-m rules, match trap | 484.9 | 3318.5 | 6.84x |
| 50 n-m rules,goto non-chain| 2884.1 | 2939.7 | 1.02x |
+----------------------------+--------+--------+--------+
perf top (25 n-m skip_sw rules - pre patch):
20.39% [kernel] [k] __skb_flow_dissect
16.43% [kernel] [k] rhashtable_jhash2
10.58% [kernel] [k] fl_classify
10.23% [kernel] [k] fl_mask_lookup
4.79% [kernel] [k] memset_orig
2.58% [kernel] [k] tcf_classify
1.47% [kernel] [k] __x86_indirect_thunk_rax
1.42% [kernel] [k] __dev_queue_xmit
1.36% [kernel] [k] nft_do_chain
1.21% [kernel] [k] __rcu_read_lock
perf top (25 n-m skip_sw rules - post patch):
5.12% [kernel] [k] __dev_queue_xmit
4.77% [kernel] [k] nft_do_chain
3.65% [kernel] [k] dev_gro_receive
3.41% [kernel] [k] check_preemption_disabled
3.14% [kernel] [k] mlx5e_skb_from_cqe_mpwrq_nonlinear
2.88% [kernel] [k] __netif_receive_skb_core.constprop.0
2.49% [kernel] [k] mlx5e_xmit
2.15% [kernel] [k] ip_forward
1.95% [kernel] [k] mlx5e_tc_restore_tunnel
1.92% [kernel] [k] vlan_gro_receive
Test setup:
DUT: Intel Xeon D-1518 (2.20GHz) w/ Nvidia/Mellanox ConnectX-6 Dx 2x100G
Data rate measured on switch (Extreme X690), and DUT connected as
a router on a stick, with pktgen and pktsink as VLANs.
Pktgen-dpdk was in range 36.6-37.7 Mpps 64B packets across all tests.
Full test data at https://files.fiberby.net/ast/2024/tc_skip_sw/v2_tests/
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Asbjørn Sloth Tønnesen [Mon, 25 Mar 2024 20:47:35 +0000 (20:47 +0000)]
net: sched: cls_api: add filter counter
Maintain a count of filters per block.
Counter updates are protected by cb_lock, which is
also used to protect the offload counters.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Asbjørn Sloth Tønnesen [Mon, 25 Mar 2024 20:47:34 +0000 (20:47 +0000)]
net: sched: cls_api: add skip_sw counter
Maintain a count of skip_sw filters.
This counter is protected by the cb_lock, and is updated
at the same time as offloadcnt.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 29 Mar 2024 05:50:21 +0000 (22:50 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: use less resources in switchdev
Michal Swiatkowski says:
Switchdev is using one queue per created port representor. This can
quickly lead to Rx queue shortage, as with subfunction support user
can create high number of PRs.
Save one MSI-X and 'number of PRs' * 1 queues.
Refactor switchdev slow-path to use less resources (even no additional
resources). Do this by removing control plane VSI and move its
functionality to PF VSI. Even with current solution PF is acting like
uplink and can't be used simultaneously for other use cases (adding
filters can break slow-path).
In short, do Tx via PF VSI and Rx packets using PF resources. Rx needs
additional code in interrupt handler to choose correct PR netdev.
Previous solution had to queue filters, it was way more elegant but
needed one queue per PRs. Beside that this refactor mostly simplifies
switchdev configuration.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: count representor stats
ice: do switchdev slow-path Rx using PF VSI
ice: change repr::id values
ice: remove switchdev control plane VSI
ice: control default Tx rule in lag
ice: default Tx rule instead of to queue
ice: do Tx through PF netdev in slow-path
ice: remove eswitch changing queues algorithm
====================
Link: https://lore.kernel.org/r/20240325202623.1012287-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 29 Mar 2024 05:36:54 +0000 (22:36 -0700)]
Merge branch 'bnxt_en-ptp-and-rss-updates'
Michael Chan says:
====================
bnxt_en: PTP and RSS updates
The first 2 patches are v2 of the PTP patches posted about 3 weeks ago:
https://lore.kernel.org/netdev/
20240229070202.107488-1-michael.chan@broadcom.com/
The devlink parameter is dropped and v2 is just to increase the timeout
accuracy and to use a default timeout of 1 second.
Patches 3 to 12 implement additional RSS contexts and ntuple filters for
the RSS contexts.
====================
Link: https://lore.kernel.org/r/20240325222902.220712-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi [Mon, 25 Mar 2024 22:29:02 +0000 (15:29 -0700)]
bnxt_en: Support adding ntuple rules on RSS contexts
When the user wants to add an ntuple filter to an RSS context, select
the appropriate VNIC belonging to the selected RSS context and add the
VNIC destination rule.
Make the necessary changes to bnxt_add_ntuple_cls_rule().
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-13-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi [Mon, 25 Mar 2024 22:29:01 +0000 (15:29 -0700)]
bnxt_en: Refactor bnxt_cfg_rfs_ring_tbl_idx()
Refactor bnxt_cfg_rfs_ring_tbl_idx() to pass in the filter structure
pointer instead of the RX ring number. This will allow an ntuple
filter to be set up for the non-default RSS contexts in the next
patch.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-12-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi [Mon, 25 Mar 2024 22:29:00 +0000 (15:29 -0700)]
bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()
Support up to 32 RSS contexts per device if supported by the device.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-11-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan [Mon, 25 Mar 2024 22:28:59 +0000 (15:28 -0700)]
bnxt_en: Refactor bnxt_set_rxfh()
Add a new bnxt_modify_rss() function to modify the RSS key and RSS
indirection table. The new function can modify the parameters for
the default context or additional contexts.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-10-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi [Mon, 25 Mar 2024 22:28:58 +0000 (15:28 -0700)]
bnxt_en: Add a new_rss_ctx parameter to bnxt_rfs_capable()
Modify bnxt_rfs_capable() to check that there are enough resources
to support aRFS/ntuple filters for a new RSS context requested by
the user. Existing use cases in the driver will always set the
new parameter to false.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-9-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan [Mon, 25 Mar 2024 22:28:57 +0000 (15:28 -0700)]
bnxt_en: Simplify bnxt_rfs_capable()
bnxt_rfs_capable() determines the number of VNICs and RSS_CTXs
required to support aRFS and then reserves the resources. We already
have functions bnxt_get_total_vnics() and bnxt_get_total_rss_ctxs()
to do that. Simplify the code by calling these functions. It is
also more correct to do the resource reservation after
bnxt_can_reserve_rings() returns true.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-8-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi [Mon, 25 Mar 2024 22:28:56 +0000 (15:28 -0700)]
bnxt_en: Refactor RSS indir alloc/set functions
We will need to dynamically allocate and change indirection tables
for additional RSS contexts. Add the rss_ctx pointer parameter to
bnxt_alloc_rss_indir_tbl() and bnxt_set_dflt_rss_indir_tbl().
Existing usage will always pass rss_ctx as NULL which means the
default RSS context.
When supporting additional RSS contexts in subsequent patches, we'll
pass the valid rss_ctx to these 2 functions.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi [Mon, 25 Mar 2024 22:28:55 +0000 (15:28 -0700)]
bnxt_en: Introduce rss ctx structure, alloc/free functions
Add struct bnxt_rss_ctx, related storage lists, required
defines, and its alloc/free functions.
Later patches will use them in order to support multiple
RSS contexts.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi [Mon, 25 Mar 2024 22:28:54 +0000 (15:28 -0700)]
bnxt_en: Refactor VNIC alloc and cfg functions
The current VNIC structures are stored in an array bp->vnic_info[].
The index of the array (vnic_id) is passed to all the functions that
need to reference the VNIC.
This patch changes the scheme to pass the VNIC pointer instead of the
vnic index. Subsequent patches will create additional VNICs that
will not be stored in the bp->vnic_info[] array. Using the VNIC
pointer will work for all the VNICs.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi [Mon, 25 Mar 2024 22:28:53 +0000 (15:28 -0700)]
bnxt_en: Add helper function bnxt_hwrm_vnic_rss_cfg_p5()
This is a pure refactoring patch. The new function
bnxt_hwrm_vnic_set_rss_p5() will set up the P5_PLUS specific RSS ring
table and then call bnxt_hwrm_vnic_cfg() to setup the vnic for proper
RSS operations. This new function will be used later for additional
RSS contexts.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi [Mon, 25 Mar 2024 22:28:52 +0000 (15:28 -0700)]
bnxt_en: Retry PTP TX timestamp from FW for 1 second
Use a new default 1 second timeout value instead of the existing
1 msec value. The driver will keep track of the remaining time
before timeout and will pass this value to bnxt_hwrm_port_ts_query().
The firmware supports timeout values up to 65535 usecs. If the
timeout value passed to bnxt_hwrm_port_ts_query() is less than the
FW max value, we will use that value to precisely control the
specified timeout. If it is larger than the FW max value, we will
use the FW max value and any additional retry to reach the desired
timeout will be done in the context of bnxt_ptp_ts_aux_eork().
Link: https://lore.kernel.org/netdev/20240229070202.107488-2-michael.chan@broadcom.com/
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20240325222902.220712-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan [Mon, 25 Mar 2024 22:28:51 +0000 (15:28 -0700)]
bnxt_en: Add a timeout parameter to bnxt_hwrm_port_ts_query()
The caller can pass this new timeout parameter to the function to
specify the firmware timeout value when requesting the TX timestamp
from the firmware. This will allow the caller to precisely control
the timeout and will be used in the next patch. In this patch, the
parameter is 0 which means to use the current default value.
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20240325222902.220712-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 29 Mar 2024 02:21:37 +0000 (19:21 -0700)]
Merge branch 'fix-missing-phy-to-mac-rx-clock'
Romain Gantois says:
====================
Fix missing PHY-to-MAC RX clock
There is an issue with some stmmac/PHY combinations that has been reported
some time ago in a couple of different series:
Clark Wang's report:
https://lore.kernel.org/all/
20230202081559.
3553637-1-xiaoning.wang@nxp.com/
Clément Léger's report:
https://lore.kernel.org/linux-arm-kernel/
20230116103926.276869-4-clement.leger@bootlin.com/
Stmmac controllers require an RX clock signal from the MII bus to perform
their hardware initialization successfully. This causes issues with some
PHY/PCS devices. If these devices do not bring the clock signal up before
the MAC driver initializes its hardware, then said initialization will
fail. This can happen at probe time or when the system wakes up from a
suspended state.
This series introduces new flags for phy_device and phylink_pcs. These
flags allow MAC drivers to signal to PHY/PCS drivers that the RX clock
signal should be enabled as soon as possible, and that it should always
stay enabled.
I have included specific uses of these flags that fix the RZN1 GMAC1 stmmac
driver that I am currently working on and that is not yet upstream. I have
also included changes to the at803x PHY driver that should fix the issue
that Clark Wang was having.
====================
Link: https://lore.kernel.org/r/20240326-rxc_bugfix-v6-0-24a74e5c761f@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Romain Gantois [Tue, 26 Mar 2024 13:32:13 +0000 (14:32 +0100)]
net: pcs: rzn1-miic: Init RX clock early if MAC requires it
The GMAC1 controller in the RZN1 IP requires the RX MII clock signal to be
started before it initializes its own hardware, thus before it calls
phylink_start.
Implement the pcs_pre_init() callback so that the RX clock signal can be
enabled early if necessary.
Reported-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/linux-arm-kernel/20230116103926.276869-4-clement.leger@bootlin.com/
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240326-rxc_bugfix-v6-7-24a74e5c761f@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Tue, 26 Mar 2024 13:32:12 +0000 (14:32 +0100)]
net: phy: qcom: at803x: Avoid hibernating if MAC requires RX clock
Stmmac controllers connected to an at803x PHY cannot resume properly after
suspend when WoL is enabled. This happens because the MAC requires an RX
clock generated by the PHY to initialize its hardware properly. But the RX
clock is cut when the PHY suspends and isn't brought up until the MAC
driver resumes the phylink.
Prevent the at803x PHY driver from going into suspend if the attached MAC
driver always requires an RX clock signal.
Reported-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/all/20230202081559.3553637-1-xiaoning.wang@nxp.com/
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[rgantois: commit log]
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240326-rxc_bugfix-v6-6-24a74e5c761f@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Romain Gantois [Tue, 26 Mar 2024 13:32:11 +0000 (14:32 +0100)]
net: stmmac: Signal to PHY/PCS drivers to keep RX clock on
There is a reocurring issue with stmmac controllers where the MAC fails to
initialize its hardware if an RX clock signal isn't provided on the MAC/PHY
link.
This causes issues when PHY or PCS devices either go into suspend while
cutting the RX clock or do not bring the clock signal up early enough for
the MAC to initialize successfully.
Set the mac_requires_rxc flag in the stmmac phylink config so that PHY/PCS
drivers know to keep the RX clock up at all times.
Reported-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/all/20230202081559.3553637-1-xiaoning.wang@nxp.com/
Reported-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/linux-arm-kernel/20230116103926.276869-4-clement.leger@bootlin.com/
Co-developed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240326-rxc_bugfix-v6-5-24a74e5c761f@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Romain Gantois [Tue, 26 Mar 2024 13:32:10 +0000 (14:32 +0100)]
net: stmmac: Support a generic PCS field in mac_device_info
Global stmmac support for early initialization of PCS devices requires a
generic PCS reference that can be passed to phylink_pcs_pre_init().
Currently, the mac_device_info struct contains only one PCS field, which is
specific to the Lynx model.
As PCS models are hardware-specific, it is more appropriate to have a
generic PCS field in the mac_device_info struct.
Refactor the lynx_pcs field into a generic phylink_pcs field.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240326-rxc_bugfix-v6-4-24a74e5c761f@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxime Chevallier [Tue, 26 Mar 2024 13:32:09 +0000 (14:32 +0100)]
net: stmmac: don't rely on lynx_pcs presence to check for a PHY
When initializing attached PHYs, there are some cases where we don't expect
any PHY to be connected. The logic uses conditions based on various local
PCS configuration, but also calls-in phylink_expects_phy() via
stmmac_init_phy(), which is enough to ensure we don't try to initialize a
PHY when using a Lynx PCS, as long as we have the phy_interface set to a
802.3z mode and are using inband negociation.
Drop the lynx check, making the stmmac generic code more pcs_lynx-agnostic.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[rgantois: commit log]
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240326-rxc_bugfix-v6-3-24a74e5c761f@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Romain Gantois [Tue, 26 Mar 2024 13:32:08 +0000 (14:32 +0100)]
net: phylink: add rxc_always_on flag to phylink_pcs
Some MAC drivers (e.g. stmmac) require a continuous receive clock signal to
be generated by a PCS that is handled by a standalone PCS driver.
Such a PCS driver does not have access to a PHY device, thus cannot check
the PHY_F_RXC_ALWAYS_ON flag. They cannot check max_requires_rxc in the
phylink config either, since it is a private member. Therefore, a new flag
is needed to signal to the PCS that it should keep the RX clock signal up
at all times.
Co-developed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240326-rxc_bugfix-v6-2-24a74e5c761f@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Tue, 26 Mar 2024 13:32:07 +0000 (14:32 +0100)]
net: phylink: add PHY_F_RXC_ALWAYS_ON to PHY dev flags
Some MAC controllers (e.g. stmmac) require their connected PHY to
continuously provide a receive clock signal. This can cause issues in two
cases:
1. The clock signal hasn't been started yet by the time the MAC driver
initializes its hardware. This can make the initialization fail, as in
the case of the rzn1 GMAC1 driver.
2. The clock signal is cut during a power saving event. By the time the
MAC is brought back up, the clock signal is still not active since
phylink_start hasn't been called yet. This brings us back to case 1.
If a PHY driver reads this flag, it should ensure that the receive clock
signal is started as soon as possible, and that it isn't brought down when
the PHY goes into suspend.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[rgantois: commit log]
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240326-rxc_bugfix-v6-1-24a74e5c761f@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 29 Mar 2024 01:50:51 +0000 (18:50 -0700)]
Merge branch 'compiler_types-add-endianness-dependent-__counted_by_-le-be'
Alexander Lobakin says:
====================
compiler_types: add Endianness-dependent __counted_by_{le,be}
Some structures contain flexible arrays at the end and the counter for
them, but the counter has explicit Endianness and thus __counted_by()
can't be used directly.
To increase test coverage for potential problems without breaking
anything, introduce __counted_by_{le,be} defined depending on platform's
Endianness to either __counted_by() when applicable or noop otherwise.
The first user will be virtchnl2.h from idpf just as example with 9 flex
structures having Little Endian counters.
Maybe it would be a good idea to introduce such attributes on compiler
level if possible, but for now let's stop on what we have.
====================
Link: https://lore.kernel.org/r/20240327142241.1745989-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin [Wed, 27 Mar 2024 14:22:41 +0000 (15:22 +0100)]
idpf: sprinkle __counted_by{,_le}() in the virtchnl2 header
Both virtchnl2.h and its consumer idpf_virtchnl.c are very error-prone.
There are 10 structures with flexible arrays at the end, but 9 of them
has flex member counter in Little Endian.
Make the code a bit more robust by applying __counted_by_le() to those
9. LE platforms is the main target for this driver, so they would
receive additional protection.
While we're here, add __counted_by() to virtchnl2_ptype::proto_id, as
its counter is `u8` regardless of the Endianness.
Compile test on x86_64 (LE) didn't reveal any new issues after applying
the attributes.
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240327142241.1745989-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin [Wed, 27 Mar 2024 14:22:40 +0000 (15:22 +0100)]
idpf: make virtchnl2.h self-contained
To ease maintaining of virtchnl2.h, which already is messy enough,
make it self-contained by adding missing if_ether.h include due to
%ETH_ALEN usage.
At the same time, virtchnl2_lan_desc.h is not used anywhere in the
file, so move this include to idpf_txrx.h to speed up C preprocessing.
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240327142241.1745989-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin [Wed, 27 Mar 2024 14:22:39 +0000 (15:22 +0100)]
compiler_types: add Endianness-dependent __counted_by_{le,be}
Some structures contain flexible arrays at the end and the counter for
them, but the counter has explicit Endianness and thus __counted_by()
can't be used directly.
To increase test coverage for potential problems without breaking
anything, introduce __counted_by_{le,be}() defined depending on
platform's Endianness to either __counted_by() when applicable or noop
otherwise.
Maybe it would be a good idea to introduce such attributes on compiler
level if possible, but for now let's stop on what we have.
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240327142241.1745989-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 27 Mar 2024 04:02:12 +0000 (21:02 -0700)]
net: remove gfp_mask from napi_alloc_skb()
__napi_alloc_skb() is napi_alloc_skb() with the added flexibility
of choosing gfp_mask. This is a NAPI function, so GFP_ATOMIC is
implied. The only practical choice the caller has is whether to
set __GFP_NOWARN. But that's a false choice, too, allocation failures
in atomic context will happen, and printing warnings in logs,
effectively for a packet drop, is both too much and very likely
non-actionable.
This leads me to a conclusion that most uses of napi_alloc_skb()
are simply misguided, and should use __GFP_NOWARN in the first
place. We also have a "standard" way of reporting allocation
failures via the queue stat API (qstats::rx-alloc-fail).
The direct motivation for this patch is that one of the drivers
used at Meta calls napi_alloc_skb() (so prior to this patch without
__GFP_NOWARN), and the resulting OOM warning is the top networking
warning in our fleet.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240327040213.3153864-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bjorn Helgaas [Mon, 25 Mar 2024 22:49:31 +0000 (17:49 -0500)]
qed: Drop useless pci_params.pm_cap
qed_init_pci() used pci_params.pm_cap only to cache the pci_dev.pm_cap.
Drop the cache and use pci_dev.pm_cap directly.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240325224931.1462051-1-helgaas@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
John Fraker [Mon, 25 Mar 2024 22:33:08 +0000 (15:33 -0700)]
gve: Add counter adminq_get_ptype_map_cnt to stats report
This counter counts the number of times get_ptype_map is executed on the
admin queue, and was previously missing from the stats report.
Signed-off-by: John Fraker <jfraker@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240325223308.618671-1-jfraker@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 29 Mar 2024 01:17:54 +0000 (18:17 -0700)]
Merge branch 'ravb-support-describing-the-mdio-bus'
Niklas Söderlund says:
====================
ravb: Support describing the MDIO bus
This series adds support to the binding and driver of the Renesas
Ethernet AVB to described the MDIO bus. Currently the driver uses
the OF node of the device itself when registering the MDIO bus.
This forces any MDIO bus properties the MDIO core should react on
to be set on the device OF node. This is confusing and none of
the MDIO bus properties are described in the Ethernet AVB bindings.
Patch 1/2 extends the bindings with an optional mdio child-node
to the device that can be used to contain the MDIO bus settings.
While patch 2/2 changes the driver to use this node (if present)
when registering the MDIO bus.
If the new optional mdio child-node is not present the driver
fallback to the old behavior and uses the device OF node like before.
This change is fully backward compatible with existing usage
of the bindings.
====================
Link: https://lore.kernel.org/r/20240325153451.2366083-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Niklas Söderlund [Mon, 25 Mar 2024 15:34:51 +0000 (16:34 +0100)]
ravb: Add support for an optional MDIO mode
The driver used the DT node of the device itself when registering the
MDIO bus. While this works, it creates a problem: it forces any MDIO bus
properties to also be set on the devices DT node. This mixes the
properties of two distinctly different things and is confusing.
This change adds support for an optional mdio node to be defined as a
child to the device DT node. The child node can then be used to describe
MDIO bus properties that the MDIO core can act on when registering the
bus.
If no mdio child node is found the driver fallback to the old behavior
and register the MDIO bus using the device DT node. This change is
backward compatible with old bindings in use.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240325153451.2366083-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Niklas Söderlund [Mon, 25 Mar 2024 15:34:50 +0000 (16:34 +0100)]
dt-bindings: net: renesas,etheravb: Add optional MDIO bus node
The Renesas Ethernet AVB bindings do not allow the MDIO bus to be
described. This has not been needed as only a single PHY is
supported and no MDIO bus properties have been needed.
Add an optional mdio node to the binding which allows the MDIO bus to be
described and allow bus properties to be set.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240325153451.2366083-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 29 Mar 2024 01:07:10 +0000 (18:07 -0700)]
Merge branch 'doc-netlink-specs-add-vlan-support'
Hangbin Liu says:
====================
doc/netlink/specs: Add vlan support
Add vlan support in rt_link spec.
====================
Link: https://lore.kernel.org/r/20240327123130.1322921-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Wed, 27 Mar 2024 12:31:29 +0000 (20:31 +0800)]
doc/netlink/specs: Add vlan attr in rt_link spec
With command:
# ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "eno1.2"}' --output-json | \
jq -C '.linkinfo'
Before:
Exception: No message format for 'vlan' in sub-message spec 'linkinfo-data-msg'
After:
{
"kind": "vlan",
"data": {
"protocol": "8021q",
"id": 2,
"flag": {
"flags": [
"reorder-hdr"
],
"mask": "0xffffffff"
},
"egress-qos": {
"mapping": [
{
"from": 1,
"to": 2
},
{
"from": 4,
"to": 4
}
]
}
}
}
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240327123130.1322921-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Wed, 27 Mar 2024 12:31:28 +0000 (20:31 +0800)]
ynl: support hex display_hint for integer
Some times it would be convenient to read the integer as hex, like
mask values.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240327123130.1322921-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 29 Mar 2024 01:03:45 +0000 (18:03 -0700)]
Merge branch 'selftests-fixes-for-kernel-ci'
Petr Machata says:
====================
selftests: Fixes for kernel CI
As discussed on the bi-weekly call on Jan 30, and in mailing around
kernel CI effort, some changes are desirable in the suite of forwarding
selftests the better to work with the CI tooling. Namely:
- The forwarding selftests use a configuration file where names of
interfaces are defined and various variables can be overridden. There
is also forwarding.config.sample that users can use as a template to
refer to when creating the config file. What happens a fair bit is
that users either do not know about this at all, or simply forget, and
are confused by cryptic failures about interfaces that cannot be
created.
In patches #1 - #3 have lib.sh just be the single source of truth with
regards to which variables exist. That includes the topology variables
which were previously only in the sample file, and any "tweak
variables", such as what tools to use, sleep times, etc.
forwarding.config.sample then becomes just a placeholder with a couple
examples. Unless specific HW should be exercised, or specific tools
used, the defaults are usually just fine.
- Several net/forwarding/ selftests (and one net/ one) cannot be run on
veth pairs, they need an actual HW interface to run on. They are
generic in the sense that any capable HW should pass them, which is
why they have been put to net/forwarding/ as opposed to drivers/net/,
but they do not generalize to veth. The fact that these tests are in
net/forwarding/, but still complaining when run, is confusing.
In patches #4 - #6 move these tests to a new directory
drivers/net/hw.
- The following patches extend the codebase to handle well test results
other than pass and fail.
Patch #7 is preparatory. It converts several log_test_skip to XFAIL,
so that tests do not spuriously end up returning non-0 when they
are not supposed to.
In patches #8 - #10, introduce some missing ksft constants, then support
having those constants in RET, and then finally in EXIT_STATUS.
- The traffic scheduler tests generate a large amount of network traffic
to test the behavior of the scheduler. This demands a relatively
high-performance computer. On slow machines, such as with a debugging
kernel, the test would spuriously fail.
It can still be useful to "go through the motions" though, to possibly
catch bugs in setup of the scheduler graph and passing packets around.
Thus we still want to run the tests, just with lowered demands.
To that end, in patches #11 - #12, introduce an environment variable
KSFT_MACHINE_SLOW, with obvious meaning. Tests can then make checks
more lenient, such as mark failures as XFAIL. A helper, xfail_on_slow,
is provided to mark performance-sensitive parts of the selftest.
- In patch #13, use a similar mechanism to mark a NH group stats
selftest to XFAIL HW stats tests when run on VETH pairs.
- All these changes complicate the hitherto straightforward logging and
checking logic, so in patch #14, add a selftest that checks this
functionality in lib.sh.
v1 (vs. an RFC circulated through linux-kselftest):
- Patch #9:
- Clarify intended usage by s/set_ret/ret_set_ksft_status/,
s/nret/ksft_status/
====================
Link: https://lore.kernel.org/r/cover.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:41 +0000 (17:54 +0100)]
selftests: forwarding: Add a test for testing lib.sh functionality
Rerunning various scenarios to make sure lib.sh changes do not impact the
observable behavior is no fun. Add a selftest at least for the bare basics
-- the mechanics of setting RET, retmsg, and EXIT_STATUS.
Since the selftest itself uses lib.sh, it would be possible to break lib.sh
in such a way that invalidates result of the selftest. Since the metatest
only uses the bare basics (just pass/fail), hopefully such fundamental
breakages would be noticed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/6d25cedbf2d4b83614944809a34fe023fbe8db38.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:40 +0000 (17:54 +0100)]
selftests: forwarding: router_mpath_nh_lib: Don't skip, xfail on veth
When the NH group stats tests are currently run on a veth topology, the
HW-stats leg of each test is SKIP'ped. But kernel networking CI interprets
skips as a sign that tooling is missing, and prompts maintainer
investigation. Lack of capability to pass a test should be expressed as
XFAIL.
Selftests that require HW should normally be put in drivers/net/hw, but
doing so for the NH counter selftests would just lead to a lot of
duplicity.
So instead, introduce a helper, xfail_on_veth(), which can be used to mark
selftests that should XFAIL instead of FAILing when run on a veth topology.
On non-veth topology, they don't do anything.
Use the helper in the HW-stats part of router_mpath_nh_lib selftest.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/15f0ab9637aa0497f164ec30e83c1c8f53d53719.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:39 +0000 (17:54 +0100)]
selftests: forwarding: Mark performance-sensitive tests
When run on a slow machine, the scheduler traffic tests can be expected to
fail, and should be reported as XFAIL in that case. Therefore run these
tests through the perf_sensitive wrapper.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/9a357f8cf34f5ececac08d43a3eb023008996035.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:38 +0000 (17:54 +0100)]
selftests: forwarding: Support for performance sensitive tests
Several tests in the suite use large amounts of traffic to e.g. cause
congestion and evaluate RED or shaper performance. These tests will not run
well on a slow machine, be it one with heavy debug kernel, or a VM, or e.g.
a single-board computer. Allow users to specify an environment variable,
KSFT_MACHINE_SLOW=yes, to indicate that the tests are being run on one such
machine.
Performance sensitive tests can then use a new helper, xfail_on_slow(), to
mark parts of the test that are sensitive to low-performance machines.
The helper can be used to just mark the whole suite, like so:
xfail_on_slow tests_run
... or, on the other side of the granularity spectrum, to override
individual checks:
xfail_on_slow check_err $? "Expected much, got little."
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/99a376a2d2ffdaeee7752b1910cb0c3ea5d80fbe.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:37 +0000 (17:54 +0100)]
selftests: forwarding: Convert log_test() to recognize RET values
In a previous patch, the interpretation of RET value was changed to mean
the kselftest framework constant with the test outcome: $ksft_pass,
$ksft_xfail, etc.
Update log_test() to recognize the various possible RET values.
Then have EXIT_STATUS track the RET value of the current test. This differs
subtly from the way RET tracks the value: while for RET we want to
recognize XFAIL as a separate status, for purposes of exit code, we want to
to conflate XFAIL and PASS, because they both communicate non-failure. Thus
add a new helper, ksft_exit_status_merge().
With this log_test_skip() and log_test_xfail() can be reexpressed as thin
wrappers around log_test.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/e5f807cb5476ab795fd14ac74da53a731a9fc432.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:36 +0000 (17:54 +0100)]
selftests: forwarding: Have RET track kselftest framework constants
The variable RET keeps track of whether the test under execution has so far
failed or not. Currently it works in binary fashion: zero means everything
is fine, non-zero means something failed. log_test() then uses the value to
given a human-readable message.
In order to allow log_test() to report skips and xfails, the semantics of
RET need to be more fine-grained. Therefore have RET value be one of
kselftest framework constants: $ksft_fail, $ksft_xfail, etc.
The current logic in check_err() is such that first non-zero value of RET
trumps all those that follow. But that is not right when RET has more
fine-grained value semantics. Different outcomes have different weights.
The results of PASS and XFAIL are mostly the same: they both communicate a
test that did not go wrong. SKIP communicates lack of tooling, which the
user should go and try to fix, and as such should not be overridden by the
passes. So far, the higher-numbered statuses can be considered weightier.
But FAIL should be the weightiest.
Add a helper, ksft_status_merge(), which merges two statuses in a way that
respects the above conditions. Express it in a generic manner, because exit
status merge is subtly different, and we want to reuse the same logic.
Use the new helper when setting RET in check_err().
Re-express check_fail() in terms of check_err() to avoid duplication.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/7dfff51cc925c7a3ac879b9050a0d6a327c8d21f.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:35 +0000 (17:54 +0100)]
selftests: lib: Define more kselftest exit codes
The following patches will operate with more exit codes besides
ksft_skip. Add them here.
Additionally, move a duplicated skip exit code definition from
forwarding/tc_tunnel_key.sh. Keep a similar duplicate in
forwarding/devlink_lib.sh, because even though lib.sh will have
been sourced in all cases where devlink_lib is, the inclusion is not
visible in the file itself, and relying on it would be confusing.
Cc: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/545a03046c7aca0628a51a389a9b81949ab288ce.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:34 +0000 (17:54 +0100)]
selftests: forwarding: Change inappropriate log_test_skip() calls
The SKIP return should be used for cases where tooling of the machine under
test is lacking. For cases where HW is lacking, the appropriate outcome is
XFAIL.
This is the case with ethtool_rmon and mlxsw_lib. For these, introduce a
new helper, log_test_xfail().
Do the same for router_mpath_nh_lib. Note that it will be fixed using a
more reusable way in a following patch.
For the two resource_scale selftests, the log should simply not be written,
because there is no problem.
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/3d668d8fb6fa0d9eeb47ce6d9e54114348c7c179.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:33 +0000 (17:54 +0100)]
selftests: forwarding: Ditch skip_on_veth()
Since the selftests that are not supposed to run on veth pairs are now in
their own dedicated directory, the skip_on_veth logic can go away. Drop it
from the selftests, and from lib.sh.
Cc: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/63b470e10d65270571ee7de709b31672ce314872.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:32 +0000 (17:54 +0100)]
selftests: forwarding: Move several selftests
The tests in net/forwarding are generally expected to be HW-independent.
There are however several tests that, while not depending on any HW in
particular, nevertheless depend on being used on HW interfaces. Placing
these selftests to net/forwarding is confusing, because the selftest will
just report it can't be run on veth pairs. At the same time, placing them
to a particular driver's selftests subdirectory would be wrong.
Instead, add a new directory, drivers/net/hw, where these generic but HW
independent selftests should be placed. Move over several such tests
including one helper library.
Since typically these tests will not be expected to run, omit the directory
drivers/net/hw from the TARGETS list in selftests/Makefile. Retain a
Makefile in the new directory itself, so that a user can make -C into that
directory and act on those tests explicitly.
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Cc: Danielle Ratson <danieller@nvidia.com>
Cc: Davide Caratti <dcaratti@redhat.com>
Cc: Johannes Nixdorf <jnixdorf-oss@avm.de>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/e11dae1f62703059e9fc2240004288ac7cc15756.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:31 +0000 (17:54 +0100)]
selftests: forwarding: ipip_lib: Do not import lib.sh
This library is always sourced in the context where lib.sh has already been
sourced as well. Therefore drop the explicit sourcing and expect the client
to already have done it. This will simplify moving some of the clients to a
different directory.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/a4da5e9cd42a34cbace917a048ca71081719d6ac.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:30 +0000 (17:54 +0100)]
selftests: forwarding: README: Document customization
That any sort of customization is possible at all, let alone how it should
be done, is currently not at all clear. Document the whats and hows in
README.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/e819623af6aaeea49e9dc36cecd95694fad73bb8.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:29 +0000 (17:54 +0100)]
selftests: forwarding.config.sample: Move overrides to lib.sh
forwarding.config.sample, net/lib.sh and net/forwarding/lib.sh contain
definitions and redefinitions of some of the same variables. The overlap
between net/forwarding/lib.sh and forwarding.config.sample is especially
large. This duplication is a potential source of confusion and problems.
It would be overall less error prone if each variable were defined in one
place only. In this patch set, that place is the library itself. Therefore
move all comments from forwarding.config.sample to net/forwarding/lib.sh.
Move over also a definition of TC_FLAG, which was missing from lib.sh
entirely.
Additionally, add to lib.sh a default definition of the topology variables.
The logic behind this is that forgetting to specify forwarding.config was a
frequent source of frustration for the selftest users. But really, most of
the time the default veth based topology is just fine. We considered just
sourcing forwarding.config.sample instead if forwarding.config is not
available, but this is a cleaner solution.
That means the syntax of the forwarding.config.sample override has to
change to an array assignment, so that the whole variable is overwritten,
not just individual keys, which could leave the value of some keys
unchanged. Do the same in lib.sh for any cut'n'pasters out there.
The config file is then given a sort of carte blanche to redefine whatever
variables it sees fit from the libraries. This is described in a comment in
the file. Only a handful of variables are left behind, to illustrate the
customization.
The fact that the variables are now missing from forwarding.config.sample,
and therefore would miss from forwarding.config derived from that file as
well, should not change anything. This is just the sample file. Users that
keep their own forwarding.config would retain it as before.
The only observable change is introduction of TC_FLAG to lib.sh, because
now the filters would not be attempted to install to HW datapath. For veth
pairs this does not change anything. For HW deployments, users presumably
have forwarding.config with this value overridden.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/b9b8a11a22821a7aa532211ff461a34f596e26bf.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 26 Mar 2024 16:54:28 +0000 (17:54 +0100)]
selftests: net: libs: Change variable fallback syntax
The current syntax of X=${X:=X} first evaluates the ${X:=Y} expression,
which either uses the existing value of $X if there is one, or uses the
value of "Y" as a fallback, and assigns it to X. The expression is then
replaced with the now-current value of $X. Assigning that value to X once
more is meaningless.
So avoid the outer X=... bit, and instead express the same idea though the
do-nothing ":" built-in as : "${X:=Y}". This also cleans up the block
nicely and makes it more readable.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/1890ddc58420c2c0d5ba3154c87ecc6d9faf6947.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 29 Mar 2024 00:24:10 +0000 (17:24 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 28 Mar 2024 20:09:37 +0000 (13:09 -0700)]
Merge tag 'net-6.9-rc2' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, WiFi and netfilter.
Current release - regressions:
- ipv6: fix address dump when IPv6 is disabled on an interface
Current release - new code bugs:
- bpf: temporarily disable atomic operations in BPF arena
- nexthop: fix uninitialized variable in nla_put_nh_group_stats()
Previous releases - regressions:
- bpf: protect against int overflow for stack access size
- hsr: fix the promiscuous mode in offload mode
- wifi: don't always use FW dump trig
- tls: adjust recv return with async crypto and failed copy to
userspace
- tcp: properly terminate timers for kernel sockets
- ice: fix memory corruption bug with suspend and rebuild
- at803x: fix kernel panic with at8031_probe
- qeth: handle deferred cc1
Previous releases - always broken:
- bpf: fix bug in BPF_LDX_MEMSX
- netfilter: reject table flag and netdev basechain updates
- inet_defrag: prevent sk release while still in use
- wifi: pick the version of SESSION_PROTECTION_NOTIF
- wwan: t7xx: split 64bit accesses to fix alignment issues
- mlxbf_gige: call request_irq() after NAPI initialized
- hns3: fix kernel crash when devlink reload during pf
initialization"
* tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
inet: inet_defrag: prevent sk release while still in use
Octeontx2-af: fix pause frame configuration in GMP mode
net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips
net: bcmasp: Remove phy_{suspend/resume}
net: bcmasp: Bring up unimac after PHY link up
net: phy: qcom: at803x: fix kernel panic with at8031_probe
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
netfilter: nf_tables: reject table flag and netdev basechain updates
netfilter: nf_tables: reject destroy command to remove basechain hooks
bpf: update BPF LSM designated reviewer list
bpf: Protect against int overflow for stack access size
bpf: Check bloom filter map value size
bpf: fix warning for crash_kexec
selftests: netdevsim: set test timeout to 10 minutes
net: wan: framer: Add missing static inline qualifiers
mlxbf_gige: call request_irq() after NAPI initialized
tls: get psock ref after taking rxlock to avoid leak
selftests: tls: add test with a partially invalid iov
tls: adjust recv return with async crypto and failed copy to userspace
...
Florian Westphal [Tue, 26 Mar 2024 10:18:41 +0000 (11:18 +0100)]
inet: inet_defrag: prevent sk release while still in use
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was :
8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize.
Fixes:
7026b1ddb6b8 ("netfilter: Pass socket pointer down through okfn().")
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reported-by: syzbot+e5167d7144a62715044c@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240326101845.30836-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hariprasad Kelam [Tue, 26 Mar 2024 05:27:20 +0000 (10:57 +0530)]
Octeontx2-af: fix pause frame configuration in GMP mode
The Octeontx2 MAC block (CGX) has separate data paths (SMU and GMP) for
different speeds, allowing for efficient data transfer.
The previous patch which added pause frame configuration has a bug due
to which pause frame feature is not working in GMP mode.
This patch fixes the issue by configurating appropriate registers.
Fixes:
f7e086e754fe ("octeontx2-af: Pause frame configuration at cgx")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326052720.4441-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Raju Lakkaraju [Tue, 26 Mar 2024 06:58:05 +0000 (12:28 +0530)]
net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips
PCI11x1x Rev B0 devices might drop packets when receiving back to back frames
at 2.5G link speed. Change the B0 Rev device's Receive filtering Engine FIFO
threshold parameter from its hardware default of 4 to 3 dwords to prevent the
problem. Rev C0 and later hardware already defaults to 3 dwords.
Fixes:
bb4f6bffe33c ("net: lan743x: Add PCI11010 / PCI11414 device IDs")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326065805.686128-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 28 Mar 2024 09:46:38 +0000 (10:46 +0100)]
Merge branch 'net-bcmasp-phy-managements-fixes'
Justin Chen says:
====================
net: bcmasp: phy managements fixes
Fix two issues.
- The unimac may be put in a bad state if PHY RX clk doesn't exist
during reset. Work around this by bringing the unimac out of reset
during phy up.
- Remove redundant phy_{suspend/resume}
====================
Link: https://lore.kernel.org/r/20240325193025.1540737-1-justin.chen@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Justin Chen [Mon, 25 Mar 2024 19:30:25 +0000 (12:30 -0700)]
net: bcmasp: Remove phy_{suspend/resume}
phy_{suspend/resume} is redundant. It gets called from phy_{stop/start}.
Fixes:
490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Justin Chen [Mon, 25 Mar 2024 19:30:24 +0000 (12:30 -0700)]
net: bcmasp: Bring up unimac after PHY link up
The unimac requires the PHY RX clk during reset or it may be put
into a bad state. Bring up the unimac after link up to ensure the
PHY RX clk exists.
Fixes:
490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Christian Marangi [Mon, 25 Mar 2024 19:06:19 +0000 (20:06 +0100)]
net: phy: qcom: at803x: fix kernel panic with at8031_probe
On reworking and splitting the at803x driver, in splitting function of
at803x PHYs it was added a NULL dereference bug where priv is referenced
before it's actually allocated and then is tried to write to for the
is_1000basex and is_fiber variables in the case of at8031, writing on
the wrong address.
Fix this by correctly setting priv local variable only after
at803x_probe is called and actually allocates priv in the phydev struct.
Reported-by: William Wortel <wwortel@dorpstraat.com>
Cc: <stable@vger.kernel.org>
Fixes:
25d2ba94005f ("net: phy: at803x: move specific at8031 probe mode check to dedicated probe")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240325190621.2665-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 28 Mar 2024 09:23:02 +0000 (10:23 +0100)]
Merge tag 'nf-24-03-28' of git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 reject destroy chain command to delete device hooks in netdev
family, hence, only delchain commands are allowed.
Patch #2 reject table flag update interference with netdev basechain
hook updates, this can leave hooks in inconsistent
registration/unregistration state.
Patch #3 do not unregister netdev basechain hooks if table is dormant.
Otherwise, splat with double unregistration is possible.
Patch #4 fixes Kconfig to allow to restore IP_NF_ARPTABLES,
from Kuniyuki Iwashima.
There are a more fixes still in progress on my side that need more work.
* tag 'nf-24-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
netfilter: nf_tables: reject table flag and netdev basechain updates
netfilter: nf_tables: reject destroy command to remove basechain hooks
====================
Link: https://lore.kernel.org/r/20240328031855.2063-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 28 Mar 2024 09:07:59 +0000 (10:07 +0100)]
Merge tag 'for-net' of https://git./linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2024-03-27
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 5 files changed, 26 insertions(+), 3 deletions(-).
The main changes are:
1) Fix bloom filter value size validation and protect the verifier
against such mistakes, from Andrei.
2) Fix build due to CONFIG_KEXEC_CORE/CRASH_DUMP split, from Hari.
3) Update bpf_lsm maintainers entry, from Matt.
* tag 'for-net' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: update BPF LSM designated reviewer list
bpf: Protect against int overflow for stack access size
bpf: Check bloom filter map value size
bpf: fix warning for crash_kexec
====================
Link: https://lore.kernel.org/r/20240328012938.24249-1-alexei.starovoitov@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Thu, 28 Mar 2024 03:24:09 +0000 (20:24 -0700)]
Merge tag 'erofs-for-6.9-rc2-fixes' of git://git./linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Add a new reviewer Sandeep Dhavale to build a healthier community
- Drop experimental warning for FSDAX
* tag 'erofs-for-6.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
MAINTAINERS: erofs: add myself as reviewer
erofs: drop experimental warning for FSDAX
Kuniyuki Iwashima [Tue, 26 Mar 2024 04:15:52 +0000 (21:15 -0700)]
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
syzkaller started to report a warning below [0] after consuming the
commit
4654467dc7e1 ("netfilter: arptables: allow xtables-nft only
builds").
The change accidentally removed the dependency on NETFILTER_FAMILY_ARP
from IP_NF_ARPTABLES.
If NF_TABLES_ARP is not enabled on Kconfig, NETFILTER_FAMILY_ARP will
be removed and some code necessary for arptables will not be compiled.
$ grep -E "(NETFILTER_FAMILY_ARP|IP_NF_ARPTABLES|NF_TABLES_ARP)" .config
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NF_TABLES_ARP is not set
CONFIG_IP_NF_ARPTABLES=y
$ make olddefconfig
$ grep -E "(NETFILTER_FAMILY_ARP|IP_NF_ARPTABLES|NF_TABLES_ARP)" .config
# CONFIG_NF_TABLES_ARP is not set
CONFIG_IP_NF_ARPTABLES=y
So, when nf_register_net_hooks() is called for arptables, it will
trigger the splat below.
Now IP_NF_ARPTABLES is only enabled by IP_NF_ARPFILTER, so let's
restore the dependency on NETFILTER_FAMILY_ARP in IP_NF_ARPFILTER.
[0]:
WARNING: CPU: 0 PID: 242 at net/netfilter/core.c:316 nf_hook_entry_head+0x1e1/0x2c0 net/netfilter/core.c:316
Modules linked in:
CPU: 0 PID: 242 Comm: syz-executor.0 Not tainted
6.8.0-12821-g537c2e91d354 #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:nf_hook_entry_head+0x1e1/0x2c0 net/netfilter/core.c:316
Code: 83 fd 04 0f 87 bc 00 00 00 e8 5b 84 83 fd 4d 8d ac ec a8 0b 00 00 e8 4e 84 83 fd 4c 89 e8 5b 5d 41 5c 41 5d c3 e8 3f 84 83 fd <0f> 0b e8 38 84 83 fd 45 31 ed 5b 5d 4c 89 e8 41 5c 41 5d c3 e8 26
RSP: 0018:
ffffc90000b8f6e8 EFLAGS:
00010293
RAX:
0000000000000000 RBX:
0000000000000003 RCX:
ffffffff83c42164
RDX:
ffff888106851180 RSI:
ffffffff83c42321 RDI:
0000000000000005
RBP:
0000000000000000 R08:
0000000000000005 R09:
000000000000000a
R10:
0000000000000003 R11:
ffff8881055c2f00 R12:
ffff888112b78000
R13:
0000000000000000 R14:
ffff8881055c2f00 R15:
ffff8881055c2f00
FS:
00007f377bd78800(0000) GS:
ffff88811b000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000496068 CR3:
000000011298b003 CR4:
0000000000770ef0
PKRU:
55555554
Call Trace:
<TASK>
__nf_register_net_hook+0xcd/0x7a0 net/netfilter/core.c:428
nf_register_net_hook+0x116/0x170 net/netfilter/core.c:578
nf_register_net_hooks+0x5d/0xc0 net/netfilter/core.c:594
arpt_register_table+0x250/0x420 net/ipv4/netfilter/arp_tables.c:1553
arptable_filter_table_init+0x41/0x60 net/ipv4/netfilter/arptable_filter.c:39
xt_find_table_lock+0x2e9/0x4b0 net/netfilter/x_tables.c:1260
xt_request_find_table_lock+0x2b/0xe0 net/netfilter/x_tables.c:1285
get_info+0x169/0x5c0 net/ipv4/netfilter/arp_tables.c:808
do_arpt_get_ctl+0x3f9/0x830 net/ipv4/netfilter/arp_tables.c:1444
nf_getsockopt+0x76/0xd0 net/netfilter/nf_sockopt.c:116
ip_getsockopt+0x17d/0x1c0 net/ipv4/ip_sockglue.c:1777
tcp_getsockopt+0x99/0x100 net/ipv4/tcp.c:4373
do_sock_getsockopt+0x279/0x360 net/socket.c:2373
__sys_getsockopt+0x115/0x1e0 net/socket.c:2402
__do_sys_getsockopt net/socket.c:2412 [inline]
__se_sys_getsockopt net/socket.c:2409 [inline]
__x64_sys_getsockopt+0xbd/0x150 net/socket.c:2409
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0x7f377beca6fe
Code: 1f 44 00 00 48 8b 15 01 97 0a 00 f7 d8 64 89 02 b8 ff ff ff ff eb b8 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 c9
RSP: 002b:
00000000005df728 EFLAGS:
00000246 ORIG_RAX:
0000000000000037
RAX:
ffffffffffffffda RBX:
00000000004966e0 RCX:
00007f377beca6fe
RDX:
0000000000000060 RSI:
0000000000000000 RDI:
0000000000000003
RBP:
000000000042938a R08:
00000000005df73c R09:
00000000005df800
R10:
00000000004966e8 R11:
0000000000000246 R12:
0000000000000003
R13:
0000000000496068 R14:
0000000000000003 R15:
00000000004bc9d8
</TASK>
Fixes:
4654467dc7e1 ("netfilter: arptables: allow xtables-nft only builds")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Thu, 21 Mar 2024 00:28:07 +0000 (01:28 +0100)]
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
Skip hook unregistration when adding or deleting devices from an
existing netdev basechain. Otherwise, commit/abort path try to
unregister hooks which not enabled.
Fixes:
b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Fixes:
7d937b107108 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Thu, 21 Mar 2024 00:27:59 +0000 (01:27 +0100)]
netfilter: nf_tables: reject table flag and netdev basechain updates
netdev basechain updates are stored in the transaction object hook list.
When setting on the table dormant flag, it iterates over the existing
hooks in the basechain. Thus, skipping the hooks that are being
added/deleted in this transaction, which leaves hook registration in
inconsistent state.
Reject table flag updates in combination with netdev basechain updates
in the same batch:
- Update table flags and add/delete basechain: Check from basechain update
path if there are pending flag updates for this table.
- add/delete basechain and update table flags: Iterate over the transaction
list to search for basechain updates from the table update path.
In both cases, the batch is rejected. Based on suggestion from Florian Westphal.
Fixes:
b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Fixes:
7d937b107108f ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Thu, 21 Mar 2024 00:27:50 +0000 (01:27 +0100)]
netfilter: nf_tables: reject destroy command to remove basechain hooks
Report EOPNOTSUPP if NFT_MSG_DESTROYCHAIN is used to delete hooks in an
existing netdev basechain, thus, only NFT_MSG_DELCHAIN is allowed.
Fixes:
7d937b107108f ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jakub Kicinski [Wed, 27 Mar 2024 22:39:17 +0000 (15:39 -0700)]
Merge tag 'wireless-2024-03-27' of git://git./linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.9-rc2
The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.
* tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (21 commits)
MAINTAINERS: wifi: mwifiex: add Francesco as reviewer
kunit: fix wireless test dependencies
wifi: iwlwifi: mvm: include link ID when releasing frames
wifi: iwlwifi: mvm: handle debugfs names more carefully
wifi: iwlwifi: mvm: guard against invalid STA ID on removal
wifi: iwlwifi: read txq->read_ptr under lock
wifi: iwlwifi: fw: don't always use FW dump trig
wifi: iwlwifi: mvm: rfi: fix potential response leaks
wifi: mac80211: correctly set active links upon TTLM
wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW
wifi: iwlwifi: mvm: consider having one active link
wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF
wifi: mac80211: fix prep_connection error path
wifi: cfg80211: fix rdev_dump_mpp() arguments order
wifi: iwlwifi: mvm: disable MLO for the time being
wifi: cfg80211: add a flag to disable wireless extensions
wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc
wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes
wifi: mac80211: fix mlme_link_id_dbg()
MAINTAINERS: wifi: add git tree for Realtek WiFi drivers
...
====================
Link: https://lore.kernel.org/r/20240327191346.1A1EAC433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 27 Mar 2024 21:53:56 +0000 (14:53 -0700)]
Merge tag '9p-fixes-for-6.9-rc1' of git://git./linux/kernel/git/ericvh/v9fs
Pull 9p fixes from Eric Van Hensbergen:
"Two of these fix syzbot reported issues, and the other fixes a unused
variable in some configurations"
* tag '9p-fixes-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: fix uninitialized values during inode evict
fs/9p: remove redundant pointer v9ses
fs/9p: fix uaf in in v9fs_stat2inode_dotl
Linus Torvalds [Wed, 27 Mar 2024 20:56:41 +0000 (13:56 -0700)]
Merge tag 'for-6.9-rc1-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix race when reading extent buffer and 'uptodate' status is missed
by one thread (introduced in 6.5)
- do additional validation of devices using major:minor numbers
- zoned mode fixes:
- use zone-aware super block access during scrub
- fix use-after-free during device replace (found by KASAN)
- also delete zones that are 100% unusable to reclaim space
- extent unpinning fixes:
- fix extent map leak after error handling
- print correct range in error message
- error code and message updates
* tag 'for-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race in read_extent_buffer_pages()
btrfs: return accurate error code on open failure in open_fs_devices()
btrfs: zoned: don't skip block groups with 100% zone unusable
btrfs: use btrfs_warn() to log message at btrfs_add_extent_mapping()
btrfs: fix message not properly printing interval when adding extent map
btrfs: fix warning messages not printing interval at unpin_extent_range()
btrfs: fix extent map leak in unexpected scenario at unpin_extent_cache()
btrfs: validate device maj:min during open
btrfs: zoned: fix use-after-free in do_zone_finish()
btrfs: zoned: use zone aware sb location for scrub
Linus Torvalds [Wed, 27 Mar 2024 20:30:48 +0000 (13:30 -0700)]
Merge tag 'mm-hotfixes-stable-2024-03-27-11-25' of git://git./linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Various hotfixes. About half are cc:stable and the remainder address
post-6.8 issues or aren't considered suitable for backporting.
zswap figures prominently in the post-6.8 issues - folloup against the
large amount of changes we have just made to that code.
Apart from that, all over the map"
* tag 'mm-hotfixes-stable-2024-03-27-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
crash: use macro to add crashk_res into iomem early for specific arch
mm: zswap: fix data loss on SWP_SYNCHRONOUS_IO devices
selftests/mm: fix ARM related issue with fork after pthread_create
hexagon: vmlinux.lds.S: handle attributes section
userfaultfd: fix deadlock warning when locking src and dst VMAs
tmpfs: fix race on handling dquot rbtree
selftests/mm: sigbus-wp test requires UFFD_FEATURE_WP_HUGETLBFS_SHMEM
mm: zswap: fix writeback shinker GFP_NOIO/GFP_NOFS recursion
ARM: prctl: reject PR_SET_MDWE on pre-ARMv6
prctl: generalize PR_SET_MDWE support check to be per-arch
MAINTAINERS: remove incorrect M: tag for dm-devel@lists.linux.dev
mm: zswap: fix kernel BUG in sg_init_one
selftests: mm: restore settings from only parent process
tools/Makefile: remove cgroup target
mm: cachestat: fix two shmem bugs
mm: increase folio batch size
mm,page_owner: fix recursion
mailmap: update entry for Leonard Crestez
init: open /initrd.image with O_LARGEFILE
selftests/mm: Fix build with _FORTIFY_SOURCE
...
Matt Bobrowski [Tue, 26 Mar 2024 19:50:19 +0000 (19:50 +0000)]
bpf: update BPF LSM designated reviewer list
Adding myself in place of both Brendan and Florent as both have since
moved on from working on the BPF LSM and will no longer be devoting
their time to maintaining the BPF LSM.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/ZgMhWF_egdYF8t4D@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Linus Torvalds [Wed, 27 Mar 2024 17:01:24 +0000 (10:01 -0700)]
Merge tag 'probes-fixes-v6.9-rc1' of git://git./linux/kernel/git/trace/linux-trace
Pull probes fixlet from Masami Hiramatsu:
- tracing/probes: initialize a 'val' local variable with zero.
This variable is read by FETCH_OP_ST_EDATA in a loop, and is
initialized by FETCH_OP_ARG in the same loop. Since this
initialization is not obvious, smatch warns about it.
Explicitly initializing 'val' with zero fixes this warning.
* tag 'probes-fixes-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probes: Fix to zero initialize a local variable
Linus Torvalds [Wed, 27 Mar 2024 16:57:30 +0000 (09:57 -0700)]
Merge tag 'execve-v6.9-rc2' of git://git./linux/kernel/git/kees/linux
Pull execve fixes from Kees Cook:
- Fix selftests to conform to the TAP output format (Muhammad Usama
Anjum)
- Fix NOMMU linux_binprm::exec pointer in auxv (Max Filippov)
- Replace deprecated strncpy usage (Justin Stitt)
- Replace another /bin/sh instance in selftests
* tag 'execve-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt: replace deprecated strncpy
exec: Fix NOMMU linux_binprm::exec in transfer_args_to_stack()
selftests/exec: Convert remaining /bin/sh to /bin/bash
selftests/exec: execveat: Improve debug reporting
selftests/exec: recursion-depth: conform test to TAP format output
selftests/exec: load_address: conform test to TAP format output
selftests/exec: binfmt_script: Add the overall result line according to TAP
Alexei Starovoitov [Wed, 27 Mar 2024 16:32:25 +0000 (09:32 -0700)]
Merge branch 'check-bloom-filter-map-value-size'
Andrei Matei says:
====================
Check bloom filter map value size
v1->v2:
- prepend a patch addressing the bloom map specifically
- change low-level rejection error to EFAULT, to indicate a bug
====================
Link: https://lore.kernel.org/r/20240327024245.318299-1-andreimatei1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrei Matei [Wed, 27 Mar 2024 02:42:45 +0000 (22:42 -0400)]
bpf: Protect against int overflow for stack access size
This patch re-introduces protection against the size of access to stack
memory being negative; the access size can appear negative as a result
of overflowing its signed int representation. This should not actually
happen, as there are other protections along the way, but we should
protect against it anyway. One code path was missing such protections
(fixed in the previous patch in the series), causing out-of-bounds array
accesses in check_stack_range_initialized(). This patch causes the
verification of a program with such a non-sensical access size to fail.
This check used to exist in a more indirect way, but was inadvertendly
removed in
a833a17aeac7.
Fixes:
a833a17aeac7 ("bpf: Fix verification of indirect var-off stack access")
Reported-by: syzbot+33f4297b5f927648741a@syzkaller.appspotmail.com
Reported-by: syzbot+aafd0513053a1cbf52ef@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/CAADnVQLORV5PT0iTAhRER+iLBTkByCYNBYyvBSgjN1T31K+gOw@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Link: https://lore.kernel.org/r/20240327024245.318299-3-andreimatei1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrei Matei [Wed, 27 Mar 2024 02:42:44 +0000 (22:42 -0400)]
bpf: Check bloom filter map value size
This patch adds a missing check to bloom filter creating, rejecting
values above KMALLOC_MAX_SIZE. This brings the bloom map in line with
many other map types.
The lack of this protection can cause kernel crashes for value sizes
that overflow int's. Such a crash was caught by syzkaller. The next
patch adds more guard-rails at a lower level.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240327024245.318299-2-andreimatei1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Linus Torvalds [Wed, 27 Mar 2024 16:48:47 +0000 (09:48 -0700)]
Fix build errors due to new UIO_MEM_DMA_COHERENT mess
Commit
576882ef5e7f ("uio: introduce UIO_MEM_DMA_COHERENT type")
introduced a new use-case for 'struct uio_mem' where the 'mem' field now
contains a kernel virtual address when 'memtype' is set to
UIO_MEM_DMA_COHERENT.
That in turn causes build errors, because 'mem' is of type
'phys_addr_t', and a virtual address is a pointer type. When the code
just blindly uses cast to mix the two, it caused problems when
phys_addr_t isn't the same size as a pointer - notably on 32-bit
architectures with PHYS_ADDR_T_64BIT.
The proper thing to do would probably be to use a union member, and not
have any casts, and make the 'mem' member be a union of 'mem.physaddr'
and 'mem.vaddr', based on 'memtype'.
This is not that proper thing. This is just fixing the ugly casts to be
even uglier, but at least not cause build errors on 32-bit platforms
with 64-bit physical addresses.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes:
576882ef5e7f ("uio: introduce UIO_MEM_DMA_COHERENT type")
Fixes:
7722151e4651 ("uio_pruss: UIO_MEM_DMA_COHERENT conversion")
Fixes:
019947805a8d ("uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Chris Leech <cleech@redhat.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linuxfoundation.org>
Linus Torvalds [Tue, 26 Mar 2024 21:59:48 +0000 (14:59 -0700)]
Fix memory leak in posix_clock_open()
If the clk ops.open() function returns an error, we don't release the
pccontext we allocated for this clock.
Re-organize the code slightly to make it all more obvious.
Reported-by: Rohit Keshri <rkeshri@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Fixes:
60c6946675fc ("posix-clock: introduce posix_clock_context concept")
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linuxfoundation.org>
Hari Bathini [Tue, 19 Mar 2024 08:01:52 +0000 (13:31 +0530)]
bpf: fix warning for crash_kexec
With [1], crash dump specific code is moved out of CONFIG_KEXEC_CORE
and placed under CONFIG_CRASH_DUMP, where it is more appropriate.
And since CONFIG_KEXEC & !CONFIG_CRASH_DUMP build option is supported
with that, it led to the below warning:
"WARN: resolve_btfids: unresolved symbol crash_kexec"
Fix it by using the appropriate #ifdef.
[1] https://lore.kernel.org/all/
20240124051254.67105-1-bhe@redhat.com/
Acked-by: Baoquan He <bhe@redhat.com>
Fixes:
02aff8480533 ("crash: split crash dumping code out from kexec_core.c")
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Link: https://lore.kernel.org/r/20240319080152.36987-1-hbathini@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jakub Kicinski [Wed, 27 Mar 2024 14:52:34 +0000 (07:52 -0700)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-03-25
We've added 38 non-merge commits during the last 13 day(s) which contain
a total of 50 files changed, 867 insertions(+), 274 deletions(-).
The main changes are:
1) Add the ability to specify and retrieve BPF cookie also for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints, from Andrii Nakryiko.
2) Allow the use of bpf_get_{ns_,}current_pid_tgid() helper for all
program types and add additional BPF selftests, from Yonghong Song.
3) Several improvements to bpftool and its build, for example, enabling
libbpf logs when loading pid_iter in debug mode, from Quentin Monnet.
4) Check the return code of all BPF-related set_memory_*() functions during
load and bail out in case they fail, from Christophe Leroy.
5) Avoid a goto in regs_refine_cond_op() such that the verifier can
be better integrated into Agni tool which doesn't support backedges
yet, from Harishankar Vishwanathan.
6) Add a small BPF trie perf improvement by always inlining
longest_prefix_match, from Jesper Dangaard Brouer.
7) Small BPF selftest refactor in bpf_tcp_ca.c to utilize start_server()
helper instead of open-coding it, from Geliang Tang.
8) Improve test_tc_tunnel.sh BPF selftest to prevent client connect
before the server bind, from Alessandro Carminati.
9) Fix BPF selftest benchmark for older glibc and use syscall(SYS_gettid)
instead of gettid(), from Alan Maguire.
10) Implement a backward-compatible method for struct_ops types with
additional fields which are not present in older kernels,
from Kui-Feng Lee.
11) Add a small helper to check if an instruction is addr_space_cast
from as(0) to as(1) and utilize it in x86-64 JIT, from Puranjay Mohan.
12) Small cleanup to remove unnecessary error check in
bpf_struct_ops_map_update_elem, from Martin KaFai Lau.
13) Improvements to libbpf fd validity checks for BPF map/programs,
from Mykyta Yatsenko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (38 commits)
selftests/bpf: Fix flaky test btf_map_in_map/lookup_update
bpf: implement insn_is_cast_user() helper for JITs
bpf: Avoid get_kernel_nofault() to fetch kprobe entry IP
selftests/bpf: Use start_server in bpf_tcp_ca
bpf: Sync uapi bpf.h to tools directory
libbpf: Add new sec_def "sk_skb/verdict"
selftests/bpf: Mark uprobe trigger functions with nocf_check attribute
selftests/bpf: Use syscall(SYS_gettid) instead of gettid() wrapper in bench
bpf-next: Avoid goto in regs_refine_cond_op()
bpftool: Clean up HOST_CFLAGS, HOST_LDFLAGS for bootstrap bpftool
selftests/bpf: scale benchmark counting by using per-CPU counters
bpftool: Remove unnecessary source files from bootstrap version
bpftool: Enable libbpf logs when loading pid_iter in debug mode
selftests/bpf: add raw_tp/tp_btf BPF cookie subtests
libbpf: add support for BPF cookie for raw_tp/tp_btf programs
bpf: support BPF cookie in raw tracepoint (raw_tp, tp_btf) programs
bpf: pass whole link instead of prog when triggering raw tracepoint
bpf: flatten bpf_probe_register call chain
selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh
selftests/bpf: Add a sk_msg prog bpf_get_ns_current_pid_tgid() test
...
====================
Link: https://lore.kernel.org/r/20240325233940.7154-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 25 Mar 2024 15:56:11 +0000 (08:56 -0700)]
selftests: netdevsim: set test timeout to 10 minutes
The longest running netdevsim test, nexthop.sh, currently takes
5 min to finish. Around 260s to be exact, and 310s on a debug kernel.
The default timeout in selftest is 45sec, so we need an explicit
config. Give ourselves some headroom and use 10min.
Commit under Fixes isn't really to "blame" but prior to that
netdevsim tests weren't integrated with kselftest infra
so blaming the tests themselves doesn't seem right, either.
Fixes:
8ff25dac88f6 ("netdevsim: add Makefile for selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herve Codina [Mon, 25 Mar 2024 08:25:05 +0000 (09:25 +0100)]
net: wan: framer: Add missing static inline qualifiers
Compilation with CONFIG_GENERIC_FRAMER disabled lead to the following
warnings:
framer.h:184:16: warning: no previous prototype for function 'framer_get' [-Wmissing-prototypes]
184 | struct framer *framer_get(struct device *dev, const char *con_id)
framer.h:184:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
184 | struct framer *framer_get(struct device *dev, const char *con_id)
framer.h:189:6: warning: no previous prototype for function 'framer_put' [-Wmissing-prototypes]
189 | void framer_put(struct device *dev, struct framer *framer)
framer.h:189:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
189 | void framer_put(struct device *dev, struct framer *framer)
Add missing 'static inline' qualifiers for these functions.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202403241110.hfJqeJRu-lkp@intel.com/
Fixes:
82c944d05b1a ("net: wan: Add framer framework support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 27 Mar 2024 03:54:21 +0000 (20:54 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-25 (ice, ixgbe, igc)
This series contains updates to ice, ixgbe, and igc drivers.
Steven fixes incorrect casting of bitmap type for ice driver.
Jesse fixes memory corruption issue with suspend flow on ice.
Przemek adds GFP_ATOMIC flag to avoid sleeping in IRQ context for ixgbe.
Kurt Kanzenbach removes no longer valid comment on igc.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Remove stale comment about Tx timestamping
ixgbe: avoid sleeping allocation in ixgbe_ipsec_vf_add_sa()
ice: fix memory corruption bug with suspend and rebuild
ice: Refactor FW data type and fix bitmap casting issue
====================
Link: https://lore.kernel.org/r/20240325200659.993749-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Thompson [Mon, 25 Mar 2024 18:36:27 +0000 (14:36 -0400)]
mlxbf_gige: call request_irq() after NAPI initialized
The mlxbf_gige driver encounters a NULL pointer exception in
mlxbf_gige_open() when kdump is enabled. The sequence to reproduce
the exception is as follows:
a) enable kdump
b) trigger kdump via "echo c > /proc/sysrq-trigger"
c) kdump kernel executes
d) kdump kernel loads mlxbf_gige module
e) the mlxbf_gige module runs its open() as the
the "oob_net0" interface is brought up
f) mlxbf_gige module will experience an exception
during its open(), something like:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
Mem abort info:
ESR = 0x0000000086000004
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
user pgtable: 4k pages, 48-bit VAs, pgdp=
00000000e29a4000
[
0000000000000000] pgd=
0000000000000000, p4d=
0000000000000000
Internal error: Oops:
0000000086000004 [#1] SMP
CPU: 0 PID: 812 Comm: NetworkManager Tainted: G OE 5.15.0-1035-bluefield #37-Ubuntu
Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.6.0.13024 Jan 19 2024
pstate:
80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : 0x0
lr : __napi_poll+0x40/0x230
sp :
ffff800008003e00
x29:
ffff800008003e00 x28:
0000000000000000 x27:
00000000ffffffff
x26:
ffff000066027238 x25:
ffff00007cedec00 x24:
ffff800008003ec8
x23:
000000000000012c x22:
ffff800008003eb7 x21:
0000000000000000
x20:
0000000000000001 x19:
ffff000066027238 x18:
0000000000000000
x17:
ffff578fcb450000 x16:
ffffa870b083c7c0 x15:
0000aaab010441d0
x14:
0000000000000001 x13:
00726f7272655f65 x12:
6769675f6662786c
x11:
0000000000000000 x10:
0000000000000000 x9 :
ffffa870b0842398
x8 :
0000000000000004 x7 :
fe5a48b9069706ea x6 :
17fdb11fc84ae0d2
x5 :
d94a82549d594f35 x4 :
0000000000000000 x3 :
0000000000400100
x2 :
0000000000000000 x1 :
0000000000000000 x0 :
ffff000066027238
Call trace:
0x0
net_rx_action+0x178/0x360
__do_softirq+0x15c/0x428
__irq_exit_rcu+0xac/0xec
irq_exit+0x18/0x2c
handle_domain_irq+0x6c/0xa0
gic_handle_irq+0xec/0x1b0
call_on_irq_stack+0x20/0x2c
do_interrupt_handler+0x5c/0x70
el1_interrupt+0x30/0x50
el1h_64_irq_handler+0x18/0x2c
el1h_64_irq+0x7c/0x80
__setup_irq+0x4c0/0x950
request_threaded_irq+0xf4/0x1bc
mlxbf_gige_request_irqs+0x68/0x110 [mlxbf_gige]
mlxbf_gige_open+0x5c/0x170 [mlxbf_gige]
__dev_open+0x100/0x220
__dev_change_flags+0x16c/0x1f0
dev_change_flags+0x2c/0x70
do_setlink+0x220/0xa40
__rtnl_newlink+0x56c/0x8a0
rtnl_newlink+0x58/0x84
rtnetlink_rcv_msg+0x138/0x3c4
netlink_rcv_skb+0x64/0x130
rtnetlink_rcv+0x20/0x30
netlink_unicast+0x2ec/0x360
netlink_sendmsg+0x278/0x490
__sock_sendmsg+0x5c/0x6c
____sys_sendmsg+0x290/0x2d4
___sys_sendmsg+0x84/0xd0
__sys_sendmsg+0x70/0xd0
__arm64_sys_sendmsg+0x2c/0x40
invoke_syscall+0x78/0x100
el0_svc_common.constprop.0+0x54/0x184
do_el0_svc+0x30/0xac
el0_svc+0x48/0x160
el0t_64_sync_handler+0xa4/0x12c
el0t_64_sync+0x1a4/0x1a8
Code: bad PC value
---[ end trace
7d1c3f3bf9d81885 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Kernel Offset: 0x2870a7a00000 from 0xffff800008000000
PHYS_OFFSET: 0x80000000
CPU features: 0x0,
000005c1,
a3332a5a
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
The exception happens because there is a pending RX interrupt before the
call to request_irq(RX IRQ) executes. Then, the RX IRQ handler fires
immediately after this request_irq() completes. The RX IRQ handler runs
"napi_schedule()" before NAPI is fully initialized via "netif_napi_add()"
and "napi_enable()", both which happen later in the open() logic.
The logic in mlxbf_gige_open() must fully initialize NAPI before any calls
to request_irq() execute.
Fixes:
f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Link: https://lore.kernel.org/r/20240325183627.7641-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 27 Mar 2024 03:48:26 +0000 (20:48 -0700)]
Merge branch 'tls-recvmsg-fixes'
Sabrina Dubroca says:
====================
tls: recvmsg fixes
The first two fixes are again related to async decrypt. The last one
is unrelated but I stumbled upon it while reading the code.
====================
Link: https://lore.kernel.org/r/cover.1711120964.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina Dubroca [Mon, 25 Mar 2024 15:56:48 +0000 (16:56 +0100)]
tls: get psock ref after taking rxlock to avoid leak
At the start of tls_sw_recvmsg, we take a reference on the psock, and
then call tls_rx_reader_lock. If that fails, we return directly
without releasing the reference.
Instead of adding a new label, just take the reference after locking
has succeeded, since we don't need it before.
Fixes:
4cbc325ed6b4 ("tls: rx: allow only one reader at a time")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/fe2ade22d030051ce4c3638704ed58b67d0df643.1711120964.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina Dubroca [Mon, 25 Mar 2024 15:56:47 +0000 (16:56 +0100)]
selftests: tls: add test with a partially invalid iov
Make sure that we don't return more bytes than we actually received if
the userspace buffer was bogus. We expect to receive at least the rest
of rec1, and possibly some of rec2 (currently, we don't, but that
would be ok).
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/720e61b3d3eab40af198a58ce2cd1ee019f0ceb1.1711120964.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina Dubroca [Mon, 25 Mar 2024 15:56:46 +0000 (16:56 +0100)]
tls: adjust recv return with async crypto and failed copy to userspace
process_rx_list may not copy as many bytes as we want to the userspace
buffer, for example in case we hit an EFAULT during the copy. If this
happens, we should only count the bytes that were actually copied,
which may be 0.
Subtracting async_copy_bytes is correct in both peek and !peek cases,
because decrypted == async_copy_bytes + peeked for the peek case: peek
is always !ZC, and we can go through either the sync or async path. In
the async case, we add chunk to both decrypted and
async_copy_bytes. In the sync case, we add chunk to both decrypted and
peeked. I missed that in commit
6caaf104423d ("tls: fix peeking with
sync+async decryption").
Fixes:
4d42cd6bc2ac ("tls: rx: fix return value for async crypto")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1b5a1eaab3c088a9dd5d9f1059ceecd7afe888d1.1711120964.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina Dubroca [Mon, 25 Mar 2024 15:56:45 +0000 (16:56 +0100)]
tls: recv: process_rx_list shouldn't use an offset with kvec
Only MSG_PEEK needs to copy from an offset during the final
process_rx_list call, because the bytes we copied at the beginning of
tls_sw_recvmsg were left on the rx_list. In the KVEC case, we removed
data from the rx_list as we were copying it, so there's no need to use
an offset, just like in the normal case.
Fixes:
692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/e5487514f828e0347d2b92ca40002c62b58af73d.1711120964.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bjorn Helgaas [Mon, 25 Mar 2024 22:06:33 +0000 (17:06 -0500)]
net: amd8111e: Drop unused copy of pm_cap
The copy of pdev->pm_cap in struct amd8111e_priv is never used. Drop it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240325220633.1453180-1-helgaas@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin [Mon, 25 Mar 2024 16:06:35 +0000 (17:06 +0100)]
net: pin system percpu page_pools to the corresponding NUMA nodes
System page_pools are percpu and one instance can be used only on
one CPU.
%NUMA_NO_NODE is fine for allocating pages, as the PP core always
allocates local pages in this case. But for the struct &page_pool
itself, this node ID means they are allocated on the boot CPU,
which may belong to a different node than the target CPU.
Pin system page_pools to the corresponding nodes when creating,
so that all the allocated data will always be local. Use
cpu_to_mem() to account memless nodes.
Nodes != 0 win some Kpps when testing with xdp-trafficgen.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240325160635.3215855-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / linux-block.git / log