Tristram Ha [Tue, 28 May 2024 21:34:26 +0000 (14:34 -0700)]
net: dsa: microchip: fix RGMII error in KSZ DSA driver
The driver should return RMII interface when XMII is running in RMII mode.
Fixes:
0ab7f6bf1675 ("net: dsa: microchip: ksz9477: use common xmii function")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Acked-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1716932066-3342-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Mikhalitsyn [Tue, 28 May 2024 20:30:30 +0000 (22:30 +0200)]
ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
A recent change to inet_dump_ifaddr had the function incorrectly iterate
over net rather than tgt_net, resulting in the data coming for the
incorrect network namespace.
Fixes:
cdb2f80f1c10 ("inet: use xa_array iterator to implement inet_dump_ifaddr()")
Reported-by: Stéphane Graber <stgraber@stgraber.org>
Closes: https://github.com/lxc/incus/issues/892
Bisected-by: Stéphane Graber <stgraber@stgraber.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Tested-by: Stéphane Graber <stgraber@stgraber.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240528203030.10839-1-aleksandr.mikhalitsyn@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 28 May 2024 11:43:53 +0000 (11:43 +0000)]
net: fix __dst_negative_advice() race
__dst_negative_advice() does not enforce proper RCU rules when
sk->dst_cache must be cleared, leading to possible UAF.
RCU rules are that we must first clear sk->sk_dst_cache,
then call dst_release(old_dst).
Note that sk_dst_reset(sk) is implementing this protocol correctly,
while __dst_negative_advice() uses the wrong order.
Given that ip6_negative_advice() has special logic
against RTF_CACHE, this means each of the three ->negative_advice()
existing methods must perform the sk_dst_reset() themselves.
Note the check against NULL dst is centralized in
__dst_negative_advice(), there is no need to duplicate
it in various callbacks.
Many thanks to Clement Lecigne for tracking this issue.
This old bug became visible after the blamed commit, using UDP sockets.
Fixes:
a87cb3e48ee8 ("net: Facility to report route quality of connected sockets")
Reported-by: Clement Lecigne <clecigne@google.com>
Diagnosed-by: Clement Lecigne <clecigne@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Adam Davis [Tue, 28 May 2024 03:12:31 +0000 (11:12 +0800)]
nfc/nci: Add the inconsistency check between the input data length and count
write$nci(r0, &(0x7f0000000740)=ANY=[@ANYBLOB="610501"], 0xf)
Syzbot constructed a write() call with a data length of 3 bytes but a count value
of 15, which passed too little data to meet the basic requirements of the function
nci_rf_intf_activated_ntf_packet().
Therefore, increasing the comparison between data length and count value to avoid
problems caused by inconsistent data length and count.
Reported-and-tested-by: syzbot+71bfed2b2bcea46c98f2@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minda Chen [Tue, 28 May 2024 01:51:20 +0000 (09:51 +0800)]
MAINTAINERS: dwmac: starfive: update Maintainer
Update the maintainer of starfive dwmac driver.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 27 May 2024 15:39:55 +0000 (18:39 +0300)]
net/sched: taprio: extend minimum interval restriction to entire cycle too
It is possible for syzbot to side-step the restriction imposed by the
blamed commit in the Fixes: tag, because the taprio UAPI permits a
cycle-time different from (and potentially shorter than) the sum of
entry intervals.
We need one more restriction, which is that the cycle time itself must
be larger than N * ETH_ZLEN bit times, where N is the number of schedule
entries. This restriction needs to apply regardless of whether the cycle
time came from the user or was the implicit, auto-calculated value, so
we move the existing "cycle == 0" check outside the "if "(!new->cycle_time)"
branch. This way covers both conditions and scenarios.
Add a selftest which illustrates the issue triggered by syzbot.
Fixes:
b5b73b26b3ca ("taprio: Fix allowing too small intervals")
Reported-by: syzbot+a7d2b1d5d1af83035567@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/
0000000000007d66bc06196e7c66@google.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240527153955.553333-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 27 May 2024 15:39:54 +0000 (18:39 +0300)]
net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
In commit
b5b73b26b3ca ("taprio: Fix allowing too small intervals"), a
comparison of user input against length_to_duration(q, ETH_ZLEN) was
introduced, to avoid RCU stalls due to frequent hrtimers.
The implementation of length_to_duration() depends on q->picos_per_byte
being set for the link speed. The blamed commit in the Fixes: tag has
moved this too late, so the checks introduced above are ineffective.
The q->picos_per_byte is zero at parse_taprio_schedule() ->
parse_sched_list() -> parse_sched_entry() -> fill_sched_entry() time.
Move the taprio_set_picos_per_byte() call as one of the first things in
taprio_change(), before the bulk of the netlink attribute parsing is
done. That's because it is needed there.
Add a selftest to make sure the issue doesn't get reintroduced.
Fixes:
09dbdf28f9f9 ("net/sched: taprio: fix calculation of maximum gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240527153955.553333-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MD Danish Anwar [Mon, 27 May 2024 06:30:15 +0000 (12:00 +0530)]
net: ti: icssg-prueth: Fix start counter for ft1 filter
The start counter for FT1 filter is wrongly set to 0 in the driver.
FT1 is used for source address violation (SAV) check and source address
starts at Byte 6 not Byte 0. Fix this by changing start counter to
ETH_ALEN in icssg_ft1_set_mac_addr().
Fixes:
e9b4ece7d74b ("net: ti: icssg-prueth: Add Firmware config and classification APIs.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240527063015.263748-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thadeu Lima de Souza Cascardo [Fri, 24 May 2024 14:47:02 +0000 (11:47 -0300)]
sock_map: avoid race between sock_map_close and sk_psock_put
sk_psock_get will return NULL if the refcount of psock has gone to 0, which
will happen when the last call of sk_psock_put is done. However,
sk_psock_drop may not have finished yet, so the close callback will still
point to sock_map_close despite psock being NULL.
This can be reproduced with a thread deleting an element from the sock map,
while the second one creates a socket, adds it to the map and closes it.
That will trigger the WARN_ON_ONCE:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 7220 at net/core/sock_map.c:1701 sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Modules linked in:
CPU: 1 PID: 7220 Comm: syz-executor380 Not tainted
6.9.0-syzkaller-07726-g3c999d1ae3c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Code: df e8 92 29 88 f8 48 8b 1b 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 79 29 88 f8 4c 8b 23 eb 89 e8 4f 15 23 f8 90 <0f> 0b 90 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d e9 13 26 3d 02
RSP: 0018:
ffffc9000441fda8 EFLAGS:
00010293
RAX:
ffffffff89731ae1 RBX:
ffffffff94b87540 RCX:
ffff888029470000
RDX:
0000000000000000 RSI:
ffffffff8bcab5c0 RDI:
ffffffff8c1faba0
RBP:
0000000000000000 R08:
ffffffff92f9b61f R09:
1ffffffff25f36c3
R10:
dffffc0000000000 R11:
fffffbfff25f36c4 R12:
ffffffff89731840
R13:
ffff88804b587000 R14:
ffff88804b587000 R15:
ffffffff89731870
FS:
000055555e080380(0000) GS:
ffff8880b9500000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
00000000207d4000 CR4:
0000000000350ef0
Call Trace:
<TASK>
unix_release+0x87/0xc0 net/unix/af_unix.c:1048
__sock_release net/socket.c:659 [inline]
sock_close+0xbe/0x240 net/socket.c:1421
__fput+0x42b/0x8a0 fs/file_table.c:422
__do_sys_close fs/open.c:1556 [inline]
__se_sys_close fs/open.c:1541 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1541
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb37d618070
Code: 00 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d4 e8 10 2c 00 00 80 3d 31 f0 07 00 00 74 17 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c
RSP: 002b:
00007ffcd4a525d8 EFLAGS:
00000202 ORIG_RAX:
0000000000000003
RAX:
ffffffffffffffda RBX:
0000000000000005 RCX:
00007fb37d618070
RDX:
0000000000000010 RSI:
00000000200001c0 RDI:
0000000000000004
RBP:
0000000000000000 R08:
0000000100000000 R09:
0000000100000000
R10:
0000000000000000 R11:
0000000000000202 R12:
0000000000000000
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
</TASK>
Use sk_psock, which will only check that the pointer is not been set to
NULL yet, which should only happen after the callbacks are restored. If,
then, a reference can still be gotten, we may call sk_psock_stop and cancel
psock->work.
As suggested by Paolo Abeni, reorder the condition so the control flow is
less convoluted.
After that change, the reproducer does not trigger the WARN_ON_ONCE
anymore.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reported-by: syzbot+07a2e4a1a57118ef7355@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
07a2e4a1a57118ef7355
Fixes:
aadb2bb83ff7 ("sock_map: Fix a potential use-after-free in sock_map_close()")
Fixes:
5b4a79ba65a1 ("bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20240524144702.1178377-1-cascardo@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thorsten Blum [Mon, 27 May 2024 10:36:19 +0000 (12:36 +0200)]
docs: netdev: Fix typo in Signed-off-by tag
s/of/off/
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Fixes:
e110ba659271 ("docs: netdev: add note about Changes Requested and revising commit messages")
Link: https://lore.kernel.org/r/20240527103618.265801-2-thorsten.blum@toblux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 28 May 2024 00:13:01 +0000 (17:13 -0700)]
Merge branch 'selftests-mptcp-mark-unstable-subtests-as-flaky'
Matthieu Baerts says:
====================
selftests: mptcp: mark unstable subtests as flaky
Some subtests can be unstable, failing once every X runs. Fixing them
can take time: there could be an issue in the kernel or in the subtest,
and it is then important to do a proper analysis, not to hide real bugs.
To avoid creating noises on the different CIs where tests are more
unstable than on our side, some subtests have been marked as flaky. As a
result, errors with these subtests (if any) are ignored.
Note that the MPTCP CI will continue to track these flaky subtests. All
these unstable subtests are also tracked by our bug tracker.
These are fixes for the -net tree, because the instabilities are visible
there. The first patch introducing the flake support has no 'Fixes'
tags, mainly because it requires recent and important refactoring done
in all MPTCP selftests. Backporting that to old versions where the flaky
tests have been introduced would be too difficult, and probably not
worth it. The other patches, adding MPTCP_LIB_SUBTEST_FLAKY=1, have a
Fixes tag, simply to ease the backport of the future fixes removing them
along with the proper fix.
====================
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-0-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts (NGI0) [Fri, 24 May 2024 16:30:59 +0000 (18:30 +0200)]
selftests: mptcp: join: mark 'fail' tests as flaky
These tests are rarely unstable. It depends on the CI running the tests,
especially if it is also busy doing other tasks in parallel, and if a
debug kernel config is being used.
It looks like this issue is sometimes present with the NetDev CI. While
this is being investigated, the tests are marked as flaky not to create
noises on such CIs.
Fixes:
b6e074e171bc ("selftests: mptcp: add infinite map testcase")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/491
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-4-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts (NGI0) [Fri, 24 May 2024 16:30:58 +0000 (18:30 +0200)]
selftests: mptcp: join: mark 'fastclose' tests as flaky
These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
also busy doing other tasks in parallel, and if a debug kernel config is
being used.
It looks like this issue is often present with the NetDev CI. While this
is being investigated, the tests are marked as flaky not to create
noises on such CIs.
Fixes:
01542c9bf9ab ("selftests: mptcp: add fastclose testcase")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/324
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-3-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts (NGI0) [Fri, 24 May 2024 16:30:57 +0000 (18:30 +0200)]
selftests: mptcp: simult flows: mark 'unbalanced' tests as flaky
These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
also busy doing other tasks in parallel.
A first analysis shown that the transfer can be slowed down when there
are some re-injections at the MPTCP level. Such re-injections can of
course happen, and disturb the transfer, but it looks strange to have
them in this lab. That could be caused by the kernel having access to
less CPU cycles -- e.g. when other activities are executed in parallel
-- or by a misinterpretation on the MPTCP packet scheduler side.
While this is being investigated, the tests are marked as flaky not to
create noises in other CIs.
Fixes:
219d04992b68 ("mptcp: push pending frames when subflow has free space")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/475
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-2-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts (NGI0) [Fri, 24 May 2024 16:30:56 +0000 (18:30 +0200)]
selftests: mptcp: lib: support flaky subtests
Some subtests can be unstable, failing once every X runs. Fixing them
can take time: there could be an issue in the kernel or in the subtest,
and it is then important to do a proper analysis, not to hide real bugs.
To avoid creating noises on the different CIs, it is important to have a
simple way to mark subtests as flaky, and ignore the errors. This is
what this patch introduces: subtests can be marked as flaky by setting
MPTCP_LIB_SUBTEST_FLAKY env var to 1, e.g.
MPTCP_LIB_SUBTEST_FLAKY=1 <run flaky subtest>
The subtest will be executed, and errors (if any) will be ignored. It is
still good to run these subtests, as it exercises code, and the results
can still be useful for the on-going investigations.
Note that the MPTCP CI will continue to track these flaky subtests by
setting SELFTESTS_MPTCP_LIB_OVERRIDE_FLAKY env var to 1, and a ticket
has to be created before marking subtests as flaky.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-1-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 28 May 2024 00:11:45 +0000 (17:11 -0700)]
Merge branch 'intel-wired-lan-driver-updates-2024-05-23-ice-idpf'
Jacob Keller says:
====================
Intel Wired LAN Driver Updates 2024-05-23 (ice, idpf)
This series contains two fixes which finished up testing.
First, Alexander fixes an issue in idpf caused by enabling NAPI and
interrupts prior to actually allocating the Rx buffers.
Second, Jacob fixes the ice driver VSI VLAN counting logic to ensure that
addition and deletion of VLANs properly manages the total VSI count.
====================
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-0-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller [Thu, 23 May 2024 17:45:30 +0000 (10:45 -0700)]
ice: fix accounting if a VLAN already exists
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target
VSI. This function prepares a filter in the switch table for the given VSI.
If it succeeds, the vsi->num_vlan counter is incremented.
It is not considered an error to add a VLAN which already exists in the
switch table, so the function explicitly checks and ignores -EEXIST. The
vsi->num_vlan counter is still incremented.
This seems incorrect, as it means we can double-count in the case where the
same VLAN is added twice by the caller. The actual table will have one less
filter than the count.
The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT
condition for when deleting a filter that doesn't exist. This flow only
decrements the vsi->num_vlan if it actually deleted a filter.
The vsi->num_vlan counter is used only in a few places, primarily related
to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of
sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs
than are present, and ice_vsi_has_non_zero_vlans() could return true
potentially in cases where there are only VLAN 0 filters left.
Fix this by only incrementing the vsi->num_vlan in the case where we
actually added an entry, and not in the case where the entry already
existed.
Fixes:
a1ffafb0b4a4 ("ice: Support configuring the device to Double VLAN Mode")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin [Thu, 23 May 2024 17:45:29 +0000 (10:45 -0700)]
idpf: don't enable NAPI and interrupts prior to allocating Rx buffers
Currently, idpf enables NAPI and interrupts prior to allocating Rx
buffers.
This may lead to frame loss (there are no buffers to place incoming
frames) and even crashes on quick ifup-ifdown. Interrupts must be
enabled only after all the resources are here and available.
Split interrupt init into two phases: initialization and enabling,
and perform the second only after the queues are fully initialized.
Note that we can't just move interrupt initialization down the init
process, as the queues must have correct a ::q_vector pointer set
and NAPI already added in order to allocate buffers correctly.
Also, during the deinit process, disable HW interrupts first and
only then disable NAPI. Otherwise, there can be a HW event leading
to napi_schedule(), but the NAPI will already be unavailable.
Fixes:
d4d558718266 ("idpf: initialize interrupts and enable vport")
Reported-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-1-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin [Fri, 24 May 2024 11:28:59 +0000 (13:28 +0200)]
page_pool: fix &page_pool_params kdoc issues
After the tagged commit, @netdev got documented twice and the kdoc
script didn't notice that. Remove the second description added later
and move the initial one according to the field position.
After merging commit
5f8e4007c10d ("kernel-doc: fix
struct_group_tagged() parsing"), kdoc requires to describe struct
groups as well. &page_pool_params has 2 struct groups which
generated new warnings, describe them to resolve this.
Fixes:
403f11ac9ab7 ("page_pool: don't use driver-set flags field directly")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240524112859.2757403-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Horatiu Vultur [Fri, 24 May 2024 08:53:50 +0000 (10:53 +0200)]
net: micrel: Fix lan8841_config_intr after getting out of sleep mode
When the interrupt is enabled, the function lan8841_config_intr tries to
clear any pending interrupts by reading the interrupt status, then
checks the return value for errors and then continue to enable the
interrupt. It has been seen that once the system gets out of sleep mode,
the interrupt status has the value 0x400 meaning that the PHY detected
that the link was in low power. That is correct value but the problem is
that the check is wrong. We try to check for errors but we return an
error also in this case which is not an error. Therefore fix this by
returning only when there is an error.
Fixes:
a8f1a19d27ef ("net: micrel: Add support for lan8841 PHY")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240524085350.359812-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xiaolei Wang [Fri, 24 May 2024 05:05:28 +0000 (13:05 +0800)]
net:fec: Add fec_enet_deinit()
When fec_probe() fails or fec_drv_remove() needs to release the
fec queue and remove a NAPI context, therefore add a function
corresponding to fec_enet_init() and call fec_enet_deinit() which
does the opposite to release memory and remove a NAPI context.
Fixes:
59d0f7465644 ("net: fec: init multi queue date structure")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240524050528.4115581-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rob Herring (Arm) [Thu, 23 May 2024 17:17:50 +0000 (12:17 -0500)]
dt-bindings: net: pse-pd: ti,tps23881: Fix missing "additionalProperties" constraints
The child nodes are missing "additionalProperties" constraints which
means any undocumented properties or child nodes are allowed. Add the
constraints and all the undocumented properties exposed by the fix.
Fixes:
f562202fedad ("dt-bindings: net: pse-pd: Add bindings for TPS23881 PSE controller")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240523171750.2837331-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rob Herring (Arm) [Thu, 23 May 2024 17:17:31 +0000 (12:17 -0500)]
dt-bindings: net: pse-pd: microchip,pd692x0: Fix missing "additionalProperties" constraints
The child nodes are missing "additionalProperties" constraints which
means any undocumented properties or child nodes are allowed. Add the
constraints, and fix the fallout of wrong manager node regex and
missing properties.
Fixes:
9c1de033afad ("dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240523171732.2836880-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Thu, 23 May 2024 13:05:27 +0000 (13:05 +0000)]
tcp: reduce accepted window in NEW_SYN_RECV state
Jason commit made checks against ACK sequence less strict
and can be exploited by attackers to establish spoofed flows
with less probes.
Innocent users might use tcp_rmem[1] == 1,000,000,000,
or something more reasonable.
An attacker can use a regular TCP connection to learn the server
initial tp->rcv_wnd, and use it to optimize the attack.
If we make sure that only the announced window (smaller than 65535)
is used for ACK validation, we force an attacker to use
65537 packets to complete the 3WHS (assuming server ISN is unknown)
Fixes:
378979e94e95 ("tcp: remove 64 KByte limit for initial tp->rcv_wnd value")
Link: https://datatracker.ietf.org/meeting/119/materials/slides-119-tcpm-ghost-acks-00
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240523130528.60376-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem de Bruijn [Thu, 23 May 2024 14:13:45 +0000 (10:13 -0400)]
net: gro: initialize network_offset in network layer
Syzkaller was able to trigger
kernel BUG at net/core/gro.c:424 !
RIP: 0010:gro_pull_from_frag0 net/core/gro.c:424 [inline]
RIP: 0010:gro_try_pull_from_frag0 net/core/gro.c:446 [inline]
RIP: 0010:dev_gro_receive+0x242f/0x24b0 net/core/gro.c:571
Due to using an incorrect NAPI_GRO_CB(skb)->network_offset.
The referenced commit sets this offset to 0 in skb_gro_reset_offset.
That matches the expected case in dev_gro_receive:
pp = INDIRECT_CALL_INET(ptype->callbacks.gro_receive,
ipv6_gro_receive, inet_gro_receive,
&gro_list->list, skb);
But syzkaller injected an skb with protocol ETH_P_TEB into an ip6gre
device (by writing the IP6GRE encapsulated version to a TAP device).
The result was a first call to eth_gro_receive, and thus an extra
ETH_HLEN in network_offset that should not be there. First issue hit
is when computing offset from network header in ipv6_gro_pull_exthdrs.
Initialize both offsets in the network layer gro_receive.
This pairs with all reads in gro_receive, which use
skb_gro_receive_network_offset().
Fixes:
186b1ea73ad8 ("net: gro: use cb instead of skb->network_header")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
CC: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240523141434.1752483-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Thu, 23 May 2024 11:02:57 +0000 (14:02 +0300)]
ipv4: Fix address dump when IPv4 is disabled on an interface
Cited commit started returning an error when user space requests to dump
the interface's IPv4 addresses and IPv4 is disabled on the interface.
Restore the previous behavior and do not return an error.
Before cited commit:
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff
inet6 fe80::e040:68ff:fe98:d018/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 67
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff
After cited commit:
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 32:2d:69:f2:9c:99 brd ff:ff:ff:ff:ff:ff
inet6 fe80::302d:69ff:fef2:9c99/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 67
# ip address show dev dummy1
RTNETLINK answers: No such device
Dump terminated
With this patch:
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff
inet6 fe80::dc17:56ff:febb:57c0/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 67
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff
I fixed the exact same issue for IPv6 in commit
c04f7dfe6ec2 ("ipv6: Fix
address dump when IPv6 is disabled on an interface"), but noted [1] that
I am not doing the change for IPv4 because I am not aware of a way to
disable IPv4 on an interface other than unregistering it. I clearly
missed the above case.
[1] https://lore.kernel.org/netdev/
20240321173042.
2151756-1-idosch@nvidia.com/
Fixes:
cdb2f80f1c10 ("inet: use xa_array iterator to implement inet_dump_ifaddr()")
Reported-by: Carolina Jubran <cjubran@nvidia.com>
Reported-by: Yamen Safadi <ysafadi@nvidia.com>
Tested-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240523110257.334315-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 27 May 2024 23:26:30 +0000 (16:26 -0700)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-05-27
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 18 files changed, 583 insertions(+), 55 deletions(-).
The main changes are:
1) Fix broken BPF multi-uprobe PID filtering logic which filtered by thread
while the promise was to filter by process, from Andrii Nakryiko.
2) Fix the recent influx of syzkaller reports to sockmap which triggered
a locking rule violation by performing a map_delete, from Jakub Sitnicki.
3) Fixes to netkit driver in particular on skb->pkt_type override upon pass
verdict, from Daniel Borkmann.
4) Fix an integer overflow in resolve_btfids which can wrongly trigger build
failures, from Friedrich Vock.
5) Follow-up fixes for ARC JIT reported by static analyzers,
from Shahab Vahedi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover verifier checks for mutating sockmap/sockhash
Revert "bpf, sockmap: Prevent lock inversion deadlock in map delete elem"
bpf: Allow delete from sockmap/sockhash only if update is allowed
selftests/bpf: Add netkit test for pkt_type
selftests/bpf: Add netkit tests for mac address
netkit: Fix pkt_type override upon netkit pass verdict
netkit: Fix setting mac address in l2 mode
ARC, bpf: Fix issues reported by the static analyzers
selftests/bpf: extend multi-uprobe tests with USDTs
selftests/bpf: extend multi-uprobe tests with child thread case
libbpf: detect broken PID filtering logic for multi-uprobe
bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic
bpf: fix multi-uprobe PID filtering logic
bpf: Fix potential integer overflow in resolve_btfids
MAINTAINERS: Add myself as reviewer of ARM64 BPF JIT
====================
Link: https://lore.kernel.org/r/20240527203551.29712-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Sitnicki [Mon, 27 May 2024 11:20:09 +0000 (13:20 +0200)]
selftests/bpf: Cover verifier checks for mutating sockmap/sockhash
Verifier enforces that only certain program types can mutate sock{map,hash}
maps, that is update it or delete from it. Add test coverage for these
checks so we don't regress.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-3-944b372f2101@cloudflare.com
Jakub Sitnicki [Mon, 27 May 2024 11:20:08 +0000 (13:20 +0200)]
Revert "bpf, sockmap: Prevent lock inversion deadlock in map delete elem"
This reverts commit
ff91059932401894e6c86341915615c5eb0eca48.
This check is no longer needed. BPF programs attached to tracepoints are
now rejected by the verifier when they attempt to delete from a
sockmap/sockhash maps.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-2-944b372f2101@cloudflare.com
Jakub Sitnicki [Mon, 27 May 2024 11:20:07 +0000 (13:20 +0200)]
bpf: Allow delete from sockmap/sockhash only if update is allowed
We have seen an influx of syzkaller reports where a BPF program attached to
a tracepoint triggers a locking rule violation by performing a map_delete
on a sockmap/sockhash.
We don't intend to support this artificial use scenario. Extend the
existing verifier allowed-program-type check for updating sockmap/sockhash
to also cover deleting from a map.
From now on only BPF programs which were previously allowed to update
sockmap/sockhash can delete from these map types.
Fixes:
ff9105993240 ("bpf, sockmap: Prevent lock inversion deadlock in map delete elem")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=
ec941d6e24f633a59172
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-1-944b372f2101@cloudflare.com
Parthiban Veerasooran [Thu, 23 May 2024 08:53:14 +0000 (14:23 +0530)]
net: usb: smsc95xx: fix changing LED_SEL bit value updated from EEPROM
LED Select (LED_SEL) bit in the LED General Purpose IO Configuration
register is used to determine the functionality of external LED pins
(Speed Indicator, Link and Activity Indicator, Full Duplex Link
Indicator). The default value for this bit is 0 when no EEPROM is
present. If a EEPROM is present, the default value is the value of the
LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or
Lite Reset (LRST) will cause this bit to be restored to the image value
last loaded from EEPROM, or to be set to 0 if no EEPROM is present.
While configuring the dual purpose GPIO/LED pins to LED outputs in the
LED General Purpose IO Configuration register, the LED_SEL bit is changed
as 0 and resulting the configured value from the EEPROM is cleared. The
issue is fixed by using read-modify-write approach.
Fixes:
f293501c61c5 ("smsc95xx: configure LED outputs")
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hariprasad Kelam [Thu, 23 May 2024 07:36:26 +0000 (13:06 +0530)]
Octeontx2-pf: Free send queue buffers incase of leaf to inner
There are two type of classes. "Leaf classes" that are the
bottom of the class hierarchy. "Inner classes" that are neither
the root class nor leaf classes. QoS rules can only specify leaf
classes as targets for traffic.
Root
/ \
/ \
1 2
/\
/ \
4 5
classes 1,4 and 5 are leaf classes.
class 2 is a inner class.
When a leaf class made as inner, or vice versa, resources associated
with send queue (send queue buffers and transmit schedulers) are not
getting freed.
Fixes:
5e6808b4c68d ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240523073626.4114-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima [Wed, 22 May 2024 15:42:18 +0000 (00:42 +0900)]
af_unix: Read sk->sk_hash under bindlock during bind().
syzkaller reported data-race of sk->sk_hash in unix_autobind() [0],
and the same ones exist in unix_bind_bsd() and unix_bind_abstract().
The three bind() functions prefetch sk->sk_hash locklessly and
use it later after validating that unix_sk(sk)->addr is NULL under
unix_sk(sk)->bindlock.
The prefetched sk->sk_hash is the hash value of unbound socket set
in unix_create1() and does not change until bind() completes.
There could be a chance that sk->sk_hash changes after the lockless
read. However, in such a case, non-NULL unix_sk(sk)->addr is visible
under unix_sk(sk)->bindlock, and bind() returns -EINVAL without using
the prefetched value.
The KCSAN splat is false-positive, but let's silence it by reading
sk->sk_hash under unix_sk(sk)->bindlock.
[0]:
BUG: KCSAN: data-race in unix_autobind / unix_autobind
write to 0xffff888034a9fb88 of 4 bytes by task 4468 on cpu 0:
__unix_set_addr_hash net/unix/af_unix.c:331 [inline]
unix_autobind+0x47a/0x7d0 net/unix/af_unix.c:1185
unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
__sys_connect_file+0xd7/0xe0 net/socket.c:2048
__sys_connect+0x114/0x140 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x40/0x50 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
read to 0xffff888034a9fb88 of 4 bytes by task 4465 on cpu 1:
unix_autobind+0x28/0x7d0 net/unix/af_unix.c:1134
unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
__sys_connect_file+0xd7/0xe0 net/socket.c:2048
__sys_connect+0x114/0x140 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x40/0x50 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
value changed: 0x000000e4 -> 0x000001e3
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted
6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes:
afd20b9290e1 ("af_unix: Replace the big lock with small locks.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240522154218.78088-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima [Wed, 22 May 2024 15:40:02 +0000 (00:40 +0900)]
af_unix: Annotate data-race around unix_sk(sk)->addr.
Once unix_sk(sk)->addr is assigned under net->unx.table.locks and
unix_sk(sk)->bindlock, *(unix_sk(sk)->addr) and unix_sk(sk)->path are
fully set up, and unix_sk(sk)->addr is never changed.
unix_getname() and unix_copy_addr() access the two fields locklessly,
and commit
ae3b564179bf ("missing barriers in some of unix_sock ->addr
and ->path accesses") added smp_store_release() and smp_load_acquire()
pairs.
In other functions, we still read unix_sk(sk)->addr locklessly to check
if the socket is bound, and KCSAN complains about it. [0]
Given these functions have no dependency for *(unix_sk(sk)->addr) and
unix_sk(sk)->path, READ_ONCE() is enough to annotate the data-race.
Note that it is safe to access unix_sk(sk)->addr locklessly if the socket
is found in the hash table. For example, the lockless read of otheru->addr
in unix_stream_connect() is safe.
Note also that newu->addr there is of the child socket that is still not
accessible from userspace, and smp_store_release() publishes the address
in case the socket is accept()ed and unix_getname() / unix_copy_addr()
is called.
[0]:
BUG: KCSAN: data-race in unix_bind / unix_listen
write (marked) to 0xffff88805f8d1840 of 8 bytes by task 13723 on cpu 0:
__unix_set_addr_hash net/unix/af_unix.c:329 [inline]
unix_bind_bsd net/unix/af_unix.c:1241 [inline]
unix_bind+0x881/0x1000 net/unix/af_unix.c:1319
__sys_bind+0x194/0x1e0 net/socket.c:1847
__do_sys_bind net/socket.c:1858 [inline]
__se_sys_bind net/socket.c:1856 [inline]
__x64_sys_bind+0x40/0x50 net/socket.c:1856
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
read to 0xffff88805f8d1840 of 8 bytes by task 13724 on cpu 1:
unix_listen+0x72/0x180 net/unix/af_unix.c:734
__sys_listen+0xdc/0x160 net/socket.c:1881
__do_sys_listen net/socket.c:1890 [inline]
__se_sys_listen net/socket.c:1888 [inline]
__x64_sys_listen+0x2e/0x40 net/socket.c:1888
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
value changed: 0x0000000000000000 -> 0xffff88807b5b1b40
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 13724 Comm: syz-executor.4 Not tainted
6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240522154002.77857-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Geliang Tang [Wed, 22 May 2024 10:45:04 +0000 (18:45 +0800)]
selftests: hsr: Fix "File exists" errors for hsr_ping
The hsr_ping test reports the following errors:
INFO: preparing interfaces for HSRv0.
INFO: Initial validation ping.
INFO: Longer ping test.
INFO: Cutting one link.
INFO: Delay the link and drop a few packages.
INFO: All good.
INFO: preparing interfaces for HSRv1.
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
INFO: Initial validation ping.
That is because the cleanup code for the 2nd round test before
"setup_hsr_interfaces 1" is removed incorrectly in commit
680fda4f6714
("test: hsr: Remove script code already implemented in lib.sh").
This patch fixes it by re-setup the namespaces using
setup_ns ns1 ns2 ns3
command before "setup_hsr_interfaces 1". It deletes previous namespaces
and create new ones.
Fixes:
680fda4f6714 ("test: hsr: Remove script code already implemented in lib.sh")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/6485d3005f467758d49f0f313c8c009759ba6b05.1716374462.git.tanggeliang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Roded Zats [Wed, 22 May 2024 07:30:44 +0000 (10:30 +0300)]
enic: Validate length of nl attributes in enic_set_vf_port
enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port.
Fixes:
f8bd909183ac ("net: Add ndo_{set|get}_vf_port support for enic dynamic vnics")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Link: https://lore.kernel.org/r/20240522073044.33519-1-rzats@paloaltonetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Daniel Borkmann [Fri, 24 May 2024 16:36:19 +0000 (18:36 +0200)]
selftests/bpf: Add netkit test for pkt_type
Add a test case to assert that the skb->pkt_type which was set from the BPF
program is retained from the netkit xmit side to the peer's device at tcx
ingress location.
# ./vmtest.sh -- ./test_progs -t netkit
[...]
./test_progs -t netkit
[ 1.140780] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.141127] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
[ 1.284601] tsc: Refined TSC clocksource calibration: 3408.006 MHz
[ 1.286672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd9b189d, max_idle_ns:
440795225691 ns
[ 1.290384] clocksource: Switched to clocksource tsc
#345 tc_netkit_basic:OK
#346 tc_netkit_device:OK
#347 tc_netkit_multi_links:OK
#348 tc_netkit_multi_opts:OK
#349 tc_netkit_neigh_links:OK
#350 tc_netkit_pkt_type:OK
Summary: 6/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240524163619.26001-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 24 May 2024 16:36:18 +0000 (18:36 +0200)]
selftests/bpf: Add netkit tests for mac address
This adds simple tests around setting MAC addresses in the different
netkit modes.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240524163619.26001-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 24 May 2024 16:36:17 +0000 (18:36 +0200)]
netkit: Fix pkt_type override upon netkit pass verdict
When running Cilium connectivity test suite with netkit in L2 mode, we
found that compared to tcx a few tests were failing which pushed traffic
into an L7 proxy sitting in host namespace. The problem in particular is
around the invocation of eth_type_trans() in netkit.
In case of tcx, this is run before the tcx ingress is triggered inside
host namespace and thus if the BPF program uses the bpf_skb_change_type()
helper the newly set type is retained. However, in case of netkit, the
late eth_type_trans() invocation overrides the earlier decision from the
BPF program which eventually leads to the test failure.
Instead of eth_type_trans(), split out the relevant parts, meaning, reset
of mac header and call to eth_skb_pkt_type() before the BPF program is run
in order to have the same behavior as with tcx, and refactor a small helper
called eth_skb_pull_mac() which is run in case it's passed up the stack
where the mac header must be pulled. With this all connectivity tests pass.
Fixes:
35dfaad7188c ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240524163619.26001-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 24 May 2024 16:36:16 +0000 (18:36 +0200)]
netkit: Fix setting mac address in l2 mode
When running Cilium connectivity test suite with netkit in L2 mode, we
found that it is expected to be able to specify a custom MAC address for
the devices, in particular, cilium-cni obtains the specified MAC address
by querying the endpoint and sets the MAC address of the interface inside
the Pod. Thus, fix the missing support in netkit for L2 mode.
Fixes:
35dfaad7188c ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20240524163619.26001-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Shahab Vahedi [Sat, 25 May 2024 03:56:28 +0000 (05:56 +0200)]
ARC, bpf: Fix issues reported by the static analyzers
Also updated couple of comments along the way.
One of the issues reported was indeed a bug in the code:
memset(ctx, 0, sizeof(ctx)) // original line
memset(ctx, 0, sizeof(*ctx)) // fixed line
That was a nice catch.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202405222314.UG5F2NHn-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/
202405232036.Xqoc3b0J-lkp@intel.com/
Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
Link: https://lore.kernel.org/r/20240525035628.1026-1-list+bpf@vahedi.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Sat, 25 May 2024 17:46:03 +0000 (10:46 -0700)]
Merge branch 'fix-bpf-multi-uprobe-pid-filtering-logic'
Andrii Nakryiko says:
====================
Fix BPF multi-uprobe PID filtering logic
It turns out that current implementation of multi-uprobe PID filtering logic
is broken. It filters by thread, while the promise is filtering by process.
Patch #1 fixes the logic trivially. The rest is testing and mitigations that
are necessary for libbpf to not break users of USDT programs.
v1->v2:
- fix selftest in last patch (CI);
- use semicolon in patch #3 (Jiri).
====================
Link: https://lore.kernel.org/r/20240521163401.3005045-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Tue, 21 May 2024 16:34:01 +0000 (09:34 -0700)]
selftests/bpf: extend multi-uprobe tests with USDTs
Validate libbpf's USDT-over-multi-uprobe logic by adding USDTs to
existing multi-uprobe tests. This checks correct libbpf fallback to
singular uprobes (when run on older kernels with buggy PID filtering).
We reuse already established child process and child thread testing
infrastructure, so additions are minimal. These test fail on either
older kernels or older version of libbpf that doesn't detect PID
filtering problems.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Tue, 21 May 2024 16:34:00 +0000 (09:34 -0700)]
selftests/bpf: extend multi-uprobe tests with child thread case
Extend existing multi-uprobe tests to test that PID filtering works
correctly. We already have child *process* tests, but we need also child
*thread* tests. This patch adds spawn_thread() helper to start child
thread, wait for it to be ready, and then instruct it to trigger desired
uprobes.
Additionally, we extend BPF-side code to track thread ID, not just
process ID. Also we detect whether extraneous triggerings with
unexpected process IDs happened, and validate that none of that happened
in practice.
These changes prove that fixed PID filtering logic for multi-uprobe
works as expected. These tests fail on old kernels.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Tue, 21 May 2024 16:33:59 +0000 (09:33 -0700)]
libbpf: detect broken PID filtering logic for multi-uprobe
Libbpf is automatically (and transparently to user) detecting
multi-uprobe support in the kernel, and, if supported, uses
multi-uprobes to improve USDT attachment speed.
USDTs can be attached system-wide or for the specific process by PID. In
the latter case, we rely on correct kernel logic of not triggering USDT
for unrelated processes.
As such, on older kernels that do support multi-uprobes, but still have
broken PID filtering logic, we need to fall back to singular uprobes.
Unfortunately, whether user is using PID filtering or not is known at
the attachment time, which happens after relevant BPF programs were
loaded into the kernel. Also unfortunately, we need to make a call
whether to use multi-uprobes or singular uprobe for SEC("usdt") programs
during BPF object load time, at which point we have no information about
possible PID filtering.
The distinction between single and multi-uprobes is small, but important
for the kernel. Multi-uprobes get BPF_TRACE_UPROBE_MULTI attach type,
and kernel internally substitiute different implementation of some of
BPF helpers (e.g., bpf_get_attach_cookie()) depending on whether uprobe
is multi or singular. So, multi-uprobes and singular uprobes cannot be
intermixed.
All the above implies that we have to make an early and conservative
call about the use of multi-uprobes. And so this patch modifies libbpf's
existing feature detector for multi-uprobe support to also check correct
PID filtering. If PID filtering is not yet fixed, we fall back to
singular uprobes for USDTs.
This extension to feature detection is simple thanks to kernel's -EINVAL
addition for pid < 0.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Tue, 21 May 2024 16:33:58 +0000 (09:33 -0700)]
bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic
get_pid_task() internally already calls rcu_read_lock() and
rcu_read_unlock(), so there is no point to do this one extra time.
This is a drive-by improvement and has no correctness implications.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Tue, 21 May 2024 16:33:57 +0000 (09:33 -0700)]
bpf: fix multi-uprobe PID filtering logic
Current implementation of PID filtering logic for multi-uprobes in
uprobe_prog_run() is filtering down to exact *thread*, while the intent
for PID filtering it to filter by *process* instead. The check in
uprobe_prog_run() also differs from the analogous one in
uprobe_multi_link_filter() for some reason. The latter is correct,
checking task->mm, not the task itself.
Fix the check in uprobe_prog_run() to perform the same task->mm check.
While doing this, we also update get_pid_task() use to use PIDTYPE_TGID
type of lookup, given the intent is to get a representative task of an
entire process. This doesn't change behavior, but seems more logical. It
would hold task group leader task now, not any random thread task.
Last but not least, given multi-uprobe support is half-broken due to
this PID filtering logic (depending on whether PID filtering is
important or not), we need to make it easy for user space consumers
(including libbpf) to easily detect whether PID filtering logic was
already fixed.
We do it here by adding an early check on passed pid parameter. If it's
negative (and so has no chance of being a valid PID), we return -EINVAL.
Previous behavior would eventually return -ESRCH ("No process found"),
given there can't be any process with negative PID. This subtle change
won't make any practical change in behavior, but will allow applications
to detect PID filtering fixes easily. Libbpf fixes take advantage of
this in the next patch.
Cc: stable@vger.kernel.org
Acked-by: Jiri Olsa <jolsa@kernel.org>
Fixes:
b733eeade420 ("bpf: Add pid filter support for uprobe_multi link")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Friedrich Vock [Tue, 14 May 2024 07:09:31 +0000 (09:09 +0200)]
bpf: Fix potential integer overflow in resolve_btfids
err is a 32-bit integer, but elf_update returns an off_t, which is 64-bit
at least on 64-bit platforms. If symbols_patch is called on a binary between
2-4GB in size, the result will be negative when cast to a 32-bit integer,
which the code assumes means an error occurred. This can wrongly trigger
build failures when building very large kernel images.
Fixes:
fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240514070931.199694-1-friedrich.vock@gmx.de
David S. Miller [Fri, 24 May 2024 12:27:08 +0000 (13:27 +0100)]
Merge branch 'mlx5-fixes'
Tariq Toukan says:
====================
mlx5 fixes 24-05-22
This patchset provides bug fixes to mlx5 core and Eth drivers.
Series generated against:
commit
9c91c7fadb17 ("net: mana: Fix the extra HZ in mana_hwc_send_request")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gal Pressman [Wed, 22 May 2024 19:26:59 +0000 (22:26 +0300)]
net/mlx5e: Fix UDP GSO for encapsulated packets
When the skb is encapsulated, adjust the inner UDP header instead of the
outer one, and account for UDP header (instead of TCP) in the inline
header size calculation.
Fixes:
689adf0d4892 ("net/mlx5e: Add UDP GSO support")
Reported-by: Jason Baron <jbaron@akamai.com>
Closes: https://lore.kernel.org/netdev/
c42961cb-50b9-4a9a-bd43-
87fe48d88d29@akamai.com/
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Carolina Jubran [Wed, 22 May 2024 19:26:58 +0000 (22:26 +0300)]
net/mlx5e: Use rx_missed_errors instead of rx_dropped for reporting buffer exhaustion
Previously, the driver incorrectly used rx_dropped to report device
buffer exhaustion.
According to the documentation, rx_dropped should not be used to count
packets dropped due to buffer exhaustion, which is the purpose of
rx_missed_errors.
Use rx_missed_errors as intended for counting packets dropped due to
buffer exhaustion.
Fixes:
269e6b3af3bf ("net/mlx5e: Report additional error statistics in get stats ndo")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Rameshbabu [Wed, 22 May 2024 19:26:57 +0000 (22:26 +0300)]
net/mlx5e: Do not use ptp structure for tx ts stats when not initialized
The ptp channel instance is only initialized when ptp traffic is first
processed by the driver. This means that there is a window in between when
port timestamping is enabled and ptp traffic is sent where the ptp channel
instance is not initialized. Accessing statistics during this window will
lead to an access violation (NULL + member offset). Check the validity of
the instance before attempting to query statistics.
BUG: unable to handle page fault for address:
0000000000003524
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
109dfc067 P4D
109dfc067 PUD
1064ef067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 420 Comm: ethtool Not tainted 6.9.0-rc2-rrameshbabu+ #245
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/204
RIP: 0010:mlx5e_stats_ts_get+0x4c/0x130
<snip>
Call Trace:
<TASK>
? show_regs+0x60/0x70
? __die+0x24/0x70
? page_fault_oops+0x15f/0x430
? do_user_addr_fault+0x2c9/0x5c0
? exc_page_fault+0x63/0x110
? asm_exc_page_fault+0x27/0x30
? mlx5e_stats_ts_get+0x4c/0x130
? mlx5e_stats_ts_get+0x20/0x130
mlx5e_get_ts_stats+0x15/0x20
<snip>
Fixes:
3579032c08c1 ("net/mlx5e: Implement ethtool hardware timestamping statistics")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Rameshbabu [Wed, 22 May 2024 19:26:56 +0000 (22:26 +0300)]
net/mlx5e: Fix IPsec tunnel mode offload feature check
Remove faulty check disabling checksum offload and GSO for offload of
simple IPsec tunnel L4 traffic. Comment previously describing the deleted
code incorrectly claimed the check prevented double tunnel (or three layers
of ip headers).
Fixes:
f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Rameshbabu [Wed, 22 May 2024 19:26:55 +0000 (22:26 +0300)]
net/mlx5: Use mlx5_ipsec_rx_status_destroy to correctly delete status rules
rx_create no longer allocates a modify_hdr instance that needs to be
cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer
dereference. A leak in the rules also previously occurred since there are
now two rules populated related to status.
BUG: kernel NULL pointer dereference, address:
0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
109907067 P4D
109907067 PUD
116890067 PMD 0
Oops: 0000 [#1] SMP
CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70
<snip>
Call Trace:
<TASK>
? show_regs+0x60/0x70
? __die+0x24/0x70
? page_fault_oops+0x15f/0x430
? free_to_partial_list.constprop.0+0x79/0x150
? do_user_addr_fault+0x2c9/0x5c0
? exc_page_fault+0x63/0x110
? asm_exc_page_fault+0x27/0x30
? mlx5_modify_header_dealloc+0xd/0x70
rx_create+0x374/0x590
rx_add_rule+0x3ad/0x500
? rx_add_rule+0x3ad/0x500
? mlx5_cmd_exec+0x2c/0x40
? mlx5_create_ipsec_obj+0xd6/0x200
mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0
mlx5e_xfrm_add_state+0x426/0xc00
<snip>
Fixes:
94af50c0a9bb ("net/mlx5e: Unify esw and normal IPsec status table creation/destruction")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gal Pressman [Wed, 22 May 2024 19:26:54 +0000 (22:26 +0300)]
net/mlx5: Fix MTMP register capability offset in MCAM register
The MTMP register (0x900a) capability offset is off-by-one, move it to
the right place.
Fixes:
1f507e80c700 ("net/mlx5: Expose NIC temperature via hardware monitoring kernel API")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Wed, 22 May 2024 19:26:53 +0000 (22:26 +0300)]
net/mlx5: Do not query MPIR on embedded CPU function
A proper query to MPIR needs to set the correct value in the depth field.
On embedded CPU this value is not necessarily zero. As there is no real
use case for multi-PF netdev on the embedded CPU of the smart NIC, block
this option.
This fixes the following failure:
ACCESS_REG(0x805) op_mod(0x1) failed, status bad system state(0x4), syndrome (0x685f19), err(-5)
Fixes:
678eb448055a ("net/mlx5: SD, Implement basic query and instantiation")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maher Sanalla [Wed, 22 May 2024 19:26:52 +0000 (22:26 +0300)]
net/mlx5: Lag, do bond only if slaves agree on roce state
Currently, the driver does not enforce that lag bond slaves must have
matching roce capabilities. Yet, in mlx5_do_bond(), the driver attempts
to enable roce on all vports of the bond slaves, causing the following
syndrome when one slave has no roce fw support:
mlx5_cmd_out_err:809:(pid 25427): MODIFY_NIC_VPORT_CONTEXT(0×755) op_mod(0×0)
failed, status bad parameter(0×3), syndrome (0xc1f678), err(-22)
Thus, create HW lag only if bond's slaves agree on roce state,
either all slaves have roce support resulting in a roce lag bond,
or none do, resulting in a raw eth bond.
Fixes:
7907f23adc18 ("net/mlx5: Implement RoCE LAG feature")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mathieu Othacehe [Tue, 21 May 2024 06:54:06 +0000 (08:54 +0200)]
net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8061
Following a similar reinstate for the KSZ8081 and KSZ9031.
Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.
The KSZ8061 errata described here:
https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8061-Errata-DS80000688B.pdf
and worked around with
232ba3a51c ("net: phy: Micrel KSZ8061: link failure after cable connect")
is back again without this soft reset.
Fixes:
6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Tested-by: Karim Ben Houcine <karim.benhoucine@landisgyr.com>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Jan [Tue, 14 May 2024 04:10:46 +0000 (12:10 +0800)]
connector: Fix invalid conversion in cn_proc.h
The implicit conversion from unsigned int to enum
proc_cn_event is invalid, so explicitly cast it
for compilation in a C++ compiler.
/usr/include/linux/cn_proc.h: In function 'proc_cn_event valid_event(proc_cn_event)':
/usr/include/linux/cn_proc.h:72:17: error: invalid conversion from 'unsigned int' to 'proc_cn_event' [-fpermissive]
72 | ev_type &= PROC_EVENT_ALL;
| ^
| |
| unsigned int
Signed-off-by: Matt Jan <zoo868e@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 23 May 2024 19:49:37 +0000 (12:49 -0700)]
Merge tag 'net-6.10-rc1' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite smaller than usual. Notably it includes the fix for the unix
regression from the past weeks. The TCP window fix will require some
follow-up, already queued.
Current release - regressions:
- af_unix: fix garbage collection of embryos
Previous releases - regressions:
- af_unix: fix race between GC and receive path
- ipv6: sr: fix missing sk_buff release in seg6_input_core
- tcp: remove 64 KByte limit for initial tp->rcv_wnd value
- eth: r8169: fix rx hangup
- eth: lan966x: remove ptp traps in case the ptp is not enabled
- eth: ixgbe: fix link breakage vs cisco switches
- eth: ice: prevent ethtool from corrupting the channels
Previous releases - always broken:
- openvswitch: set the skbuff pkt_type for proper pmtud support
- tcp: Fix shift-out-of-bounds in dctcp_update_alpha()
Misc:
- a bunch of selftests stabilization patches"
* tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits)
r8169: Fix possible ring buffer corruption on fragmented Tx packets.
idpf: Interpret .set_channels() input differently
ice: Interpret .set_channels() input differently
nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
net: relax socket state check at accept time.
tcp: remove 64 KByte limit for initial tp->rcv_wnd value
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
tls: fix missing memory barrier in tls_init
net: fec: avoid lock evasion when reading pps_enable
Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
testing: net-drv: use stats64 for testing
net: mana: Fix the extra HZ in mana_hwc_send_request
net: lan966x: Remove ptp traps in case the ptp is not enabled.
openvswitch: Set the skbuff pkt_type for proper pmtud support.
selftest: af_unix: Make SCM_RIGHTS into OOB data.
af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
selftests/net: use tc rule to filter the na packet
ipv6: sr: fix memleak in seg6_hmac_init_algo
af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
...
Linus Torvalds [Thu, 23 May 2024 19:36:38 +0000 (12:36 -0700)]
Merge tag 'trace-fixes-v6.10' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Minor last minute fixes:
- Fix a very tight race between the ring buffer readers and resizing
the ring buffer
- Correct some stale comments in the ring buffer code
- Fix kernel-doc in the rv code
- Add a MODULE_DESCRIPTION to preemptirq_delay_test"
* tag 'trace-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Update rv_en(dis)able_monitor doc to match kernel-doc
tracing: Add MODULE_DESCRIPTION() to preemptirq_delay_test
ring-buffer: Fix a race between readers and resize checks
ring-buffer: Correct stale comments related to non-consuming readers
Linus Torvalds [Thu, 23 May 2024 19:32:15 +0000 (12:32 -0700)]
Merge tag 'trace-tools-v6.10-2' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing tool fix from Steven Rostedt:
"Fix printf format warnings in latency-collector.
Use the printf format string with %s to take a string instead of
taking in a string directly"
* tag 'trace-tools-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/latency-collector: Fix -Wformat-security compile warns
Linus Torvalds [Thu, 23 May 2024 19:28:01 +0000 (12:28 -0700)]
Merge tag 'trace-assign-str-v6.10' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing cleanup from Steven Rostedt:
"Remove second argument of __assign_str()
The __assign_str() macro logic of the TRACE_EVENT() macro was
optimized so that it no longer needs the second argument. The
__assign_str() is always matched with __string() field that takes a
field name and the source for that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then
use that value to copy into the ring buffer via the __assign_str().
Before commit
c1fa617caeb0 ("tracing: Rework __assign_str() and
__string() to not duplicate getting the string"), the __assign_str()
needed the second argument which would perform the same logic as the
__string() source parameter did. Not only would this add overhead, but
it was error prone as if the __assign_str() source produced something
different, it may not have allocated enough for the string in the ring
buffer (as the __string() source was used to determine how much to
allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be
removed"
* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/treewide: Remove second parameter of __assign_str()
Linus Torvalds [Thu, 23 May 2024 19:22:20 +0000 (12:22 -0700)]
Merge tag 'sparc-for-6.10-tag1' of git://git./linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Avoid on-stack cpumask variables in a number of places
- Move struct termio to asm/termios.h, matching other architectures and
allowing certain user space applications to build also for sparc
- Fix missing prototype warnings for sparc64
- Fix version generation warnings for sparc32
- Fix bug where non-consecutive CPU IDs lead to some CPUs not starting
- Simplification using swap and cleanup using NULL for pointer
- Convert sparc parport and chmc drivers to use remove callbacks
returning void
* tag 'sparc-for-6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc/leon: Remove on-stack cpumask var
sparc/pci_msi: Remove on-stack cpumask var
sparc/of: Remove on-stack cpumask var
sparc/irq: Remove on-stack cpumask var
sparc/srmmu: Remove on-stack cpumask var
sparc: chmc: Convert to platform remove callback returning void
sparc: parport: Convert to platform remove callback returning void
sparc: Compare pointers to NULL instead of 0
sparc: Use swap() to fix Coccinelle warning
sparc32: Fix version generation failed warnings
sparc64: Fix number of online CPUs
sparc64: Fix prototype warning for sched_clock
sparc64: Fix prototype warnings in adi_64.c
sparc64: Fix prototype warning for dma_4v_iotsb_bind
sparc64: Fix prototype warning for uprobe_trap
sparc64: Fix prototype warning for alloc_irqstack_bootmem
sparc64: Fix prototype warning for vmemmap_free
sparc64: Fix prototype warnings in traps_64.c
sparc64: Fix prototype warning for init_vdso_image
sparc: move struct termio to asm/termios.h
Linus Torvalds [Thu, 23 May 2024 19:09:22 +0000 (12:09 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The major fix here is for a filesystem corruption issue reported on
Apple M1 as a result of buggy management of the floating point
register state introduced in 6.8. I initially reverted one of the
offending patches, but in the end Ard cooked a proper fix so there's a
revert+reapply in the series.
Aside from that, we've got some CPU errata workarounds and misc other
fixes.
- Fix broken FP register state tracking which resulted in filesystem
corruption when dm-crypt is used
- Workarounds for Arm CPU errata affecting the SSBS Spectre
mitigation
- Fix lockdep assertion in DMC620 memory controller PMU driver
- Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is
disabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Avoid erroneous elide of user state reload
Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
perf/arm-dmc620: Fix lockdep assert in ->event_init()
Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: errata: Add workaround for Arm errata
3194386 and
3312417
arm64: cputype: Add Neoverse-V3 definitions
arm64: cputype: Add Cortex-X4 definitions
arm64: barrier: Restore spec_bar() macro
Linus Torvalds [Thu, 23 May 2024 19:04:36 +0000 (12:04 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
Shuah Khan [Thu, 4 Apr 2024 01:10:09 +0000 (19:10 -0600)]
tools/latency-collector: Fix -Wformat-security compile warns
Fix the following -Wformat-security compile warnings adding missing
format arguments:
latency-collector.c: In function ‘show_available’:
latency-collector.c:938:17: warning: format not a string literal and
no format arguments [-Wformat-security]
938 | warnx(no_tracer_msg);
| ^~~~~
latency-collector.c:943:17: warning: format not a string literal and
no format arguments [-Wformat-security]
943 | warnx(no_latency_tr_msg);
| ^~~~~
latency-collector.c: In function ‘find_default_tracer’:
latency-collector.c:986:25: warning: format not a string literal and
no format arguments [-Wformat-security]
986 | errx(EXIT_FAILURE, no_tracer_msg);
|
^~~~
latency-collector.c: In function ‘scan_arguments’:
latency-collector.c:1881:33: warning: format not a string literal and
no format arguments [-Wformat-security]
1881 | errx(EXIT_FAILURE, no_tracer_msg);
| ^~~~
Link: https://lore.kernel.org/linux-trace-kernel/20240404011009.32945-1-skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Fixes:
e23db805da2df ("tracing/tools: Add the latency-collector to tools directory")
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Ken Milmore [Tue, 21 May 2024 22:45:50 +0000 (23:45 +0100)]
r8169: Fix possible ring buffer corruption on fragmented Tx packets.
An issue was found on the RTL8125b when transmitting small fragmented
packets, whereby invalid entries were inserted into the transmit ring
buffer, subsequently leading to calls to dma_unmap_single() with a null
address.
This was caused by rtl8169_start_xmit() not noticing changes to nr_frags
which may occur when small packets are padded (to work around hardware
quirks) in rtl8169_tso_csum_v2().
To fix this, postpone inspecting nr_frags until after any padding has been
applied.
Fixes:
9020845fb5d6 ("r8169: improve rtl8169_start_xmit")
Cc: stable@vger.kernel.org
Signed-off-by: Ken Milmore <ken.milmore@gmail.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/27ead18b-c23d-4f49-a020-1fc482c5ac95@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 23 May 2024 11:02:28 +0000 (13:02 +0200)]
Merge branch 'intel-interpret-set_channels-input-differently'
Jacob Keller says:
====================
intel: Interpret .set_channels() input differently
The ice and idpf drivers can trigger a crash with AF_XDP due to incorrect
interpretation of the asymmetric Tx and Rx parameters in their
.set_channels() implementations:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
combined number is not specified, so command becomes {rx_count = 15,
tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
new (combined_count + rx_count) to the old one, so from 55 to 40, check
does not trigger.
5. the driver interprets `rx 15 tx 15` as 15 combined channels and deletes
the queue that AF_XDP is attached to.
This is fundamentally a problem with interpreting a request for asymmetric
queues as symmetric combined queues.
Fix the ice and idpf drivers to stop interpreting such requests as a
request for combined queues. Due to current driver design for both ice and
idpf, it is not possible to support requests of the same count of Tx and Rx
queues with independent interrupts, (i.e. ethtool -L <IFNAME> rx 15 tx 15)
so such requests are now rejected.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Link: https://lore.kernel.org/r/20240521-iwl-net-2024-05-14-set-channels-fixes-v2-0-7aa39e2e99f1@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Larysa Zaremba [Tue, 21 May 2024 19:39:54 +0000 (12:39 -0700)]
idpf: Interpret .set_channels() input differently
Unlike ice, idpf does not check, if user has requested at least 1 combined
channel. Instead, it relies on a check in the core code. Unfortunately, the
check does not trigger for us because of the hacky .set_channels()
interpretation logic that is not consistent with the core code.
This naturally leads to user being able to trigger a crash with an invalid
input. This is how:
1. ethtool -l <IFNAME> -> combined: 40
2. ethtool -L <IFNAME> rx 0 tx 0
combined number is not specified, so command becomes {rx_count = 0,
tx_count = 0, combined_count = 40}.
3. ethnl_set_channels checks, if there is at least 1 RX and 1 TX channel,
comparing (combined_count + rx_count) and (combined_count + tx_count)
to zero. Obviously, (40 + 0) is greater than zero, so the core code
deems the input OK.
4. idpf interprets `rx 0 tx 0` as 0 channels and tries to proceed with such
configuration.
The issue has to be solved fundamentally, as current logic is also known to
cause AF_XDP problems in ice [0].
Interpret the command in a way that is more consistent with ethtool
manual [1] (--show-channels and --set-channels) and new ice logic.
Considering that in the idpf driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */
[0] https://lore.kernel.org/netdev/
20240418095857.2827-1-larysa.zaremba@intel.com/
[1] https://man7.org/linux/man-pages/man8/ethtool.8.html
Fixes:
02cbfba1add5 ("idpf: add ethtool callbacks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Larysa Zaremba [Tue, 21 May 2024 19:39:53 +0000 (12:39 -0700)]
ice: Interpret .set_channels() input differently
A bug occurs because a safety check guarding AF_XDP-related queues in
ethnl_set_channels(), does not trigger. This happens, because kernel and
ice driver interpret the ethtool command differently.
How the bug occurs:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
combined number is not specified, so command becomes {rx_count = 15,
tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
new (combined_count + rx_count) to the old one, so from 55 to 40, check
does not trigger.
5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the
queue that AF_XDP is attached to.
Interpret the command in a way that is more consistent with ethtool
manual [0] (--show-channels and --set-channels).
Considering that in the ice driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */
[0] https://man7.org/linux/man-pages/man8/ethtool.8.html
Fixes:
87324e747fde ("ice: Implement ethtool ops for channels")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ryosuke Yasuoka [Tue, 21 May 2024 15:34:42 +0000 (00:34 +0900)]
nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
When nci_rx_work() receives a zero-length payload packet, it should not
discard the packet and exit the loop. Instead, it should continue
processing subsequent packets.
Fixes:
d24b03535e5e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet")
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240521153444.535399-1-ryasuoka@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Tue, 21 May 2024 14:01:00 +0000 (16:01 +0200)]
net: relax socket state check at accept time.
Christoph reported the following splat:
WARNING: CPU: 1 PID: 772 at net/ipv4/af_inet.c:761 __inet_accept+0x1f4/0x4a0
Modules linked in:
CPU: 1 PID: 772 Comm: syz-executor510 Not tainted
6.9.0-rc7-g7da7119fe22b #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:__inet_accept+0x1f4/0x4a0 net/ipv4/af_inet.c:759
Code: 04 38 84 c0 0f 85 87 00 00 00 41 c7 04 24 03 00 00 00 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ec b7 da fd <0f> 0b e9 7f fe ff ff e8 e0 b7 da fd 0f 0b e9 fe fe ff ff 89 d9 80
RSP: 0018:
ffffc90000c2fc58 EFLAGS:
00010293
RAX:
ffffffff836bdd14 RBX:
0000000000000000 RCX:
ffff888104668000
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
dffffc0000000000 R08:
ffffffff836bdb89 R09:
fffff52000185f64
R10:
dffffc0000000000 R11:
fffff52000185f64 R12:
dffffc0000000000
R13:
1ffff92000185f98 R14:
ffff88810754d880 R15:
ffff8881007b7800
FS:
000000001c772880(0000) GS:
ffff88811b280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fb9fcf2e178 CR3:
00000001045d2002 CR4:
0000000000770ef0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
<TASK>
inet_accept+0x138/0x1d0 net/ipv4/af_inet.c:786
do_accept+0x435/0x620 net/socket.c:1929
__sys_accept4_file net/socket.c:1969 [inline]
__sys_accept4+0x9b/0x110 net/socket.c:1999
__do_sys_accept net/socket.c:2016 [inline]
__se_sys_accept net/socket.c:2013 [inline]
__x64_sys_accept+0x7d/0x90 net/socket.c:2013
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x58/0x100 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x4315f9
Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 ab b4 fd ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007ffdb26d9c78 EFLAGS:
00000246 ORIG_RAX:
000000000000002b
RAX:
ffffffffffffffda RBX:
0000000000400300 RCX:
00000000004315f9
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000004
RBP:
00000000006e1018 R08:
0000000000400300 R09:
0000000000400300
R10:
0000000000400300 R11:
0000000000000246 R12:
0000000000000000
R13:
000000000040cdf0 R14:
000000000040ce80 R15:
0000000000000055
</TASK>
The reproducer invokes shutdown() before entering the listener status.
After commit
94062790aedb ("tcp: defer shutdown(SEND_SHUTDOWN) for
TCP_SYN_RECV sockets"), the above causes the child to reach the accept
syscall in FIN_WAIT1 status.
Eric noted we can relax the existing assertion in __inet_accept()
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/490
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes:
94062790aedb ("tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/23ab880a44d8cfd967e84de8b93dbf48848e3d8c.1716299669.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Tue, 21 May 2024 13:42:20 +0000 (21:42 +0800)]
tcp: remove 64 KByte limit for initial tp->rcv_wnd value
Recently, we had some servers upgraded to the latest kernel and noticed
the indicator from the user side showed worse results than before. It is
caused by the limitation of tp->rcv_wnd.
In 2018 commit
a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin
to around 64KB") limited the initial value of tp->rcv_wnd to 65535, most
CDN teams would not benefit from this change because they cannot have a
large window to receive a big packet, which will be slowed down especially
in long RTT. Small rcv_wnd means slow transfer speed, to some extent. It's
the side effect for the latency/time-sensitive users.
To avoid future confusion, current change doesn't affect the initial
receive window on the wire in a SYN or SYN+ACK packet which are set within
65535 bytes according to RFC 7323 also due to the limit in
__tcp_transmit_skb():
th->window = htons(min(tp->rcv_wnd, 65535U));
In one word, __tcp_transmit_skb() already ensures that constraint is
respected, no matter how large tp->rcv_wnd is. The change doesn't violate
RFC.
Let me provide one example if with or without the patch:
Before:
client --- SYN: rwindow=65535 ---> server
client <--- SYN+ACK: rwindow=65535 ---- server
client --- ACK: rwindow=65536 ---> server
Note: for the last ACK, the calculation is 512 << 7.
After:
client --- SYN: rwindow=65535 ---> server
client <--- SYN+ACK: rwindow=65535 ---- server
client --- ACK: rwindow=175232 ---> server
Note: I use the following command to make it work:
ip route change default via [ip] dev eth0 metric 100 initrwnd 120
For the last ACK, the calculation is 1369 << 7.
When we apply such a patch, having a large rcv_wnd if the user tweak this
knob can help transfer data more rapidly and save some rtts.
Fixes:
a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240521134220.12510-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Romain Gantois [Tue, 21 May 2024 12:44:11 +0000 (14:44 +0200)]
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
In the prueth_probe() function, if one of the calls to emac_phy_connect()
fails due to of_phy_connect() returning NULL, then the subsequent call to
phy_attached_info() will dereference a NULL pointer.
Check the return code of emac_phy_connect and fail cleanly if there is an
error.
Fixes:
128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Cc: stable@vger.kernel.org
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240521-icssg-prueth-fix-v1-1-b4b17b1433e9@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dae R. Jeong [Tue, 21 May 2024 10:34:38 +0000 (19:34 +0900)]
tls: fix missing memory barrier in tls_init
In tls_init(), a write memory barrier is missing, and store-store
reordering may cause NULL dereference in tls_{setsockopt,getsockopt}.
CPU0 CPU1
----- -----
// In tls_init()
// In tls_ctx_create()
ctx = kzalloc()
ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1)
// In update_sk_prot()
WRITE_ONCE(sk->sk_prot, tls_prots) -(2)
// In sock_common_setsockopt()
READ_ONCE(sk->sk_prot)->setsockopt()
// In tls_{setsockopt,getsockopt}()
ctx->sk_proto->setsockopt() -(3)
In the above scenario, when (1) and (2) are reordered, (3) can observe
the NULL value of ctx->sk_proto, causing NULL dereference.
To fix it, we rely on rcu_assign_pointer() which implies the release
barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is
initialized, we can ensure that ctx->sk_proto are visible when
changing sk->sk_prot.
Fixes:
d5bee7374b68 ("net/tls: Annotate access to sk_prot with READ_ONCE/WRITE_ONCE")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Signed-off-by: Dae R. Jeong <threeearcat@gmail.com>
Link: https://lore.kernel.org/netdev/ZU4OJG56g2V9z_H7@dragonet/T/
Link: https://lore.kernel.org/r/Zkx4vjSFp0mfpjQ2@libra05
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wei Fang [Tue, 21 May 2024 02:38:00 +0000 (10:38 +0800)]
net: fec: avoid lock evasion when reading pps_enable
The assignment of pps_enable is protected by tmreg_lock, but the read
operation of pps_enable is not. So the Coverity tool reports a lock
evasion warning which may cause data race to occur when running in a
multithread environment. Although this issue is almost impossible to
occur, we'd better fix it, at least it seems more logically reasonable,
and it also prevents Coverity from continuing to issue warnings.
Fixes:
278d24047891 ("net: fec: ptp: Enable PPS output based on ptp clock")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20240521023800.17102-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jacob Keller [Tue, 21 May 2024 00:21:27 +0000 (17:21 -0700)]
Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
This reverts commit
565736048bd5f9888990569993c6b6bfdf6dcb6d.
According to the commit, it implements a manual AN-37 for some
"troublesome" Juniper MX5 switches. This appears to be a workaround for a
particular switch.
It has been reported that this causes a severe breakage for other switches,
including a Cisco 3560CX-12PD-S.
The code appears to be a workaround for a specific switch which fails to
link in SFI mode. It expects to see AN-37 auto negotiation in order to
link. The Cisco switch is not expecting AN-37 auto negotiation. When the
device starts the manual AN-37, the Cisco switch decides that the port is
confused and stops attempting to link with it. This persists until a power
cycle. A simple driver unload and reload does not resolve the issue, even
if loading with a version of the driver which lacks this workaround.
The authors of the workaround commit have not responded with
clarifications, and the result of the workaround is complete failure to
connect with other switches.
This appears to be a case where the driver can either "correctly" link with
the Juniper MX5 switch, at the cost of bricking the link with the Cisco
switch, or it can behave properly for the Cisco switch, but fail to link
with the Junipir MX5 switch. I do not know enough about the standards
involved to clearly determine whether either switch is at fault or behaving
incorrectly. Nor do I know whether there exists some alternative fix which
corrects behavior with both switches.
Revert the workaround for the Juniper switch.
Fixes:
565736048bd5 ("ixgbe: Manual AN-37 for troublesome link partners for X550 SFI")
Link: https://lore.kernel.org/netdev/cbe874db-9ac9-42b8-afa0-88ea910e1e99@intel.com/T/
Link: https://forum.proxmox.com/threads/intel-x553-sfp-ixgbe-no-go-on-pve8.135129/#post-612291
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Daly <jeffd@silicom-usa.com>
Cc: kernel.org-fo5k2w@ycharbi.fr
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240520-net-2024-05-20-revert-silicom-switch-workaround-v1-1-50f80f261c94@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Joe Damato [Mon, 20 May 2024 23:58:43 +0000 (23:58 +0000)]
testing: net-drv: use stats64 for testing
Testing a network device that has large numbers of bytes/packets may
overflow. Using stats64 when comparing fixes this problem.
I tripped on this while iterating on a qstats patch for mlx5. See below
for confirmation without my added code that this is a bug.
Before this patch (with added debugging output):
$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
rstat:
481708634 qstat:
666201639514 key: tx-bytes
not ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
Note the huge delta above ^^^ in the rtnl vs qstats.
After this patch:
$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
It looks like rtnl_fill_stats in net/core/rtnetlink.c will attempt to
copy the 64bit stats into a 32bit structure which is probably why this
behavior is occurring.
To show this is happening, you can get the underlying stats that the
stats.py test uses like this:
$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifi-index": 7}'
And examine the output (heavily snipped to show relevant fields):
'stats': {
'multicast':
3739197,
'rx-bytes':
1201525399,
'rx-packets':
56807158,
'tx-bytes':
492404458,
'tx-packets':
1200285371,
'stats64': {
'multicast':
3739197,
'rx-bytes':
35561263767,
'rx-packets':
56807158,
'tx-bytes':
666212335338,
'tx-packets':
1200285371,
The stats.py test prior to this patch was using the 'stats' structure
above, which matches the failure output on my system.
Comparing side by side, rx-bytes and tx-bytes, and getting ethtool -S
output:
rx-bytes stats:
1201525399
rx-bytes stats64:
35561263767
rx-bytes ethtool:
36203402638
tx-bytes stats:
492404458
tx-bytes stats64:
666212335338
tx-bytes ethtool:
666215360113
Note that the above was taken from a system with an mlx5 NIC, which only
exposes ndo_get_stats64.
Based on the ethtool output and qstat output, it appears that stats.py
should be updated to use the 'stats64' structure for accurate
comparisons when packet/byte counters get very large.
To confirm that this was not related to the qstats code I was iterating
on, I booted a kernel without my driver changes and re-ran the test
which shows the qstats are skipped (as they don't exist for mlx5):
NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum # SKIP qstats not supported by the device
ok 4 stats.qstat_by_ifindex # SKIP No ifindex supports qstats
But, fetching the stats using the CLI
$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifi-index": 7}'
Shows the same issue (heavily snipped for relevant fields only):
'stats': {
'multicast': 105489,
'rx-bytes':
530879526,
'rx-packets': 751415,
'tx-bytes':
2510191396,
'tx-packets':
27700323,
'stats64': {
'multicast': 105489,
'rx-bytes':
530879526,
'rx-packets': 751415,
'tx-bytes':
15395093284,
'tx-packets':
27700323,
Comparing side by side with ethtool -S on the unmodified mlx5 driver:
tx-bytes stats:
2510191396
tx-bytes stats64:
15395093284
tx-bytes ethtool:
17718435810
Fixes:
f0e6c86e4bab ("testing: net-drv: add a driver test for stats reporting")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/20240520235850.190041-1-jdamato@fastly.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Thu, 23 May 2024 01:59:29 +0000 (18:59 -0700)]
Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git./linux/kernel/git/akpm/mm
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
Linus Torvalds [Thu, 23 May 2024 00:32:04 +0000 (17:32 -0700)]
Merge tag 'mm-stable-2024-05-22-17-22' of git://git./linux/kernel/git/akpm/mm
Pull more mm updates from Andrew Morton:
"A series from Dave Chinner which cleans up and fixes the handling of
nested allocations within stackdepot and page-owner"
* tag 'mm-stable-2024-05-22-17-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page-owner: use gfp_nested_mask() instead of open coded masking
stackdepot: use gfp_nested_mask() instead of open coded masking
mm: lift gfp_kmemleak_mask() to gfp.h
Steven Rostedt (Google) [Thu, 16 May 2024 17:34:54 +0000 (13:34 -0400)]
tracing/treewide: Remove second parameter of __assign_str()
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/
20240222211442.
634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
Linus Torvalds [Sun, 7 Apr 2024 20:18:39 +0000 (13:18 -0700)]
mm: simplify and improve print_vma_addr() output
Use '%pD' to print out the filename, and print out the actual offset
within the file too, rather than just what the virtual address of the
mapping is (which doesn't tell you anything about any mapping offsets).
Also, use the exact vma_lookup() instead of find_vma() - the latter
looks up any vma _after_ the address, which is of questionable value
(yes, maybe you fell off the beginning, but you'd be more likely to fall
off the end).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 22 May 2024 21:13:22 +0000 (14:13 -0700)]
Merge local branch 'x86-codegen'
Merge trivial x86 code generation annoyances
- Introduce helper macros for clang asm input problems
- use said macros to improve trivially stupid code generation issues in
bitops and array_index_mask_nospec
- also improve codegen with 32-bit array index comparisons
None of these really matter, but I look at code generation and profiles
fairly regularly, and these misfeatures caused the generated code to
look really odd and distract from the real issues.
* branch 'x86-codegen' of local tree:
x86: improve bitop code generation with clang
x86: improve array_index_mask_nospec() code generation
clang: work around asm input constraint problems
Linus Torvalds [Tue, 9 Apr 2024 18:55:07 +0000 (11:55 -0700)]
x86: improve bitop code generation with clang
This uses the new ASM_INPUT_RM macro to avoid the bad code generation
issue that clang has with more generic asm inputs.
This ends up avoiding generating code like this:
mov %r10,(%rsp)
tzcnt (%rsp),%rcx
which now becomes just
tzcnt %r10,%rcx
and in the process ends up also removing a few unnecessary stack frames
when the only use was that pointless "asm uses memory location off stack".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 8 Apr 2024 18:38:30 +0000 (11:38 -0700)]
x86: improve array_index_mask_nospec() code generation
Don't force the inputs to be 'unsigned long', when the comparison can
easily be done in 32-bit if that's more appropriate.
Note that while we can look at the inputs to choose an appropriate size
for the compare instruction, the output is fixed at 'unsigned long'.
That's not technically optimal either, since a 32-bit 'sbbl' would often
be sufficient.
But for the outgoing mask we don't know how the mask ends up being used
(ie we have uses that have an incoming 32-bit array index, but end up
using the mask for other things). That said, it only costs the extra
REX prefix to always generate the 64-bit mask.
[ A 'sbbl' also always technically generates a 64-bit mask, but with the
upper 32 bits clear: that's fine for when the incoming index that will
be masked is already 32-bit, but not if you use the mask to mask a
pointer afterwards, like the file table lookup does ]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 8 Apr 2024 18:38:30 +0000 (11:38 -0700)]
clang: work around asm input constraint problems
Work around clang problems with asm constraints that have multiple
possibilities, particularly "g" and "rm".
Clang seems to turn inputs like that into the most generic form, which
is the memory input - but to make matters worse, clang won't even use a
possible original memory location, but will spill the value to stack,
and use the stack for the asm input.
See
https://github.com/llvm/llvm-project/issues/20571#issuecomment-
980933442
for some explanation of why clang has this strange behavior, but the end
result is that "g" and "rm" really end up generating horrid code.
Link: https://github.com/llvm/llvm-project/issues/20571
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 22 May 2024 19:26:46 +0000 (12:26 -0700)]
Merge tag 'char-misc-6.10-rc1' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
Linus Torvalds [Wed, 22 May 2024 19:13:40 +0000 (12:13 -0700)]
Merge tag 'driver-core-6.10-rc1' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
Linus Torvalds [Wed, 22 May 2024 19:11:48 +0000 (12:11 -0700)]
Merge tag 'staging-6.10-rc1' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver changes for 6.10-rc1. Not a lot
of cleanups happening this kernel release, intern applications must be
out of sync at the moment. But we did delete two drivers, wlan-ng and
pi433, as they are no longer in use and the developers involved wanted
them just gone entirely, allowing us to drop 19k lines from the tree.
Other than the normal coding style cleanups here, there has been a lot
of work on the vc04_services code, with the intent to finally get that
out of staging hopefully soon. It's getting closer, which is nice to
see.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (98 commits)
staging: pi433: Remove unused driver
staging: vchiq_core: Add missing blank lines
staging: vchiq_core: Drop unnecessary blank lines
staging: vchiq_core: Add parentheses to VCHIQ_MSG_SRCPORT
staging: vchiq_core: Use printk messages for devices
staging: vchiq_arm: Drop unnecessary NULL check
staging: vc04_services: Delete unnecessary NULL check
staging: vc04_services: vchiq_arm: Fix NULL ptr dereferences
Staging: rtl8192e: Rename variable DssCCk
Staging: rtl8192e: Rename variable ExtHTCapInfo
Staging: rtl8192e: Rename variable MPDUDensity
Staging: rtl8192e: Rename variable MaxRxAMPDUFactor
Staging: rtl8192e: Rename variable MaxAMSDUSize
Staging: rtl8192e: Rename variable DelayBA
Staging: rtl8192e: Rename variable RxSTBC
Staging: rtl8192e: Rename variable TxSTBC
Staging: rtl8192e: Rename variable GreenField
Staging: rtl8192e: Rename variable ShortGI20Mhz
Staging: rtl8192e: Rename variable ShortGI40Mhz
Staging: rtl8192e: Rename variable MimoPwrSave
...
Linus Torvalds [Wed, 22 May 2024 18:53:02 +0000 (11:53 -0700)]
Merge tag 'tty-6.10-rc1' of git://git./linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.10-rc1.
Included in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos
instead of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
serial: imx: Raise TX trigger level to 8
serial: 8250_pnp: Simplify "line" related code
serial: sh-sci: simplify locking when re-issuing RXDMA fails
serial: sh-sci: let timeout timer only run when DMA is scheduled
serial: sh-sci: describe locking requirements for invalidating RXDMA
serial: sh-sci: protect invalidating RXDMA on shutdown
tty: add the option to have a tty reject a new ldisc
serial: core: Call device_set_awake_path() for console port
dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
tty: serial: uartps: Add support for uartps controller reset
arm64: zynqmp: Add resets property for UART nodes
dt-bindings: serial: cdns,uart: Add optional reset property
serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
serial: 8250_exar: Keep the includes sorted
serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
serial: 8250_exar: Use BIT() in exar_ee_read()
serial: 8250_exar: Switch to use dev_err_probe()
serial: 8250_exar: Return directly from switch-cases
serial: 8250_exar: Decrease indentation level
...
Linus Torvalds [Wed, 22 May 2024 18:40:09 +0000 (11:40 -0700)]
Merge tag 'usb-6.10-rc1' of git://git./linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
Linus Torvalds [Wed, 22 May 2024 17:49:54 +0000 (10:49 -0700)]
Merge tag 'leds-next-6.10' of git://git./linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Ensure seldom updated triggers have a brightness value before first
update
New Device Support:
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
New Functionality:
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
Fix-ups:
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
Bug Fixes:
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending"
* tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: mt6370: Remove unused field 'reg_cfgs' from 'struct mt6370_priv'
leds: lp50xx: Remove unused field 'num_of_banked_leds' from 'struct lp50xx'
leds: lp50xx: Remove unused field 'bank_modules' from 'struct lp50xx_led'
leds: aat1290: Remove unused field 'torch_brightness' from 'struct aat1290_led'
leds: sun50i-a100: Use match_string() helper to simplify the code
leds: pwm: Disable PWM when going to suspend
leds: trigger: pattern: Add support for hrtimer
leds: mt6360: Fix the second LED can not enable torch mode by V4L2
dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
leds: qcom-lpg: Add support for PMI8950 PWM
leds: apu: Remove duplicate DMI lookup data
leds: trigger: netdev: Remove not needed call to led_set_brightness in deactivate
dt-bindings: leds: Add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
dt-bindings: leds: Add LED_FUNCTION_MOBILE for mobile network
leds: simatic-ipc-leds-gpio: Add support for module BX-59A
dt-bindings: leds: qcom-lpg: Document PM6150L compatible
dt-bindings: leds: pca963x: Convert text bindings to YAML
leds: an30259a: Use devm_mutex_init() for mutex initialization
leds: mlxreg: Use devm_mutex_init() for mutex initialization
leds: nic78bx: Use devm API to cleanup module's resources
...
Linus Torvalds [Wed, 22 May 2024 17:45:12 +0000 (10:45 -0700)]
Merge tag 'backlight-next-6.10' of git://git./linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Fix-ups:
- FB Backlight interaction overhaul
- Remove superfluous code and simplify overall
- Constify various structs and struct attributes
Bug Fixes:
- Repair LED flickering
- Fix signedness bugs"
* tag 'backlight-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (42 commits)
backlight: sky81452-backlight: Remove unnecessary call to of_node_get()
backlight: mp3309c: Fix LEDs flickering in PWM mode
backlight: otm3225a: Drop driver owner assignment
backlight: lp8788: Drop support for platform data
backlight: lcd: Make lcd_class constant
backlight: Make backlight_class constant
backlight: mp3309c: Fix signedness bug in mp3309c_parse_fwnode()
const_structs.checkpatch: add lcd_ops
fbdev: omap: lcd_ams_delta: Constify lcd_ops
fbdev: imx: Constify lcd_ops
fbdev: clps711x: Constify lcd_ops
HID: picoLCD: Constify lcd_ops
backlight: tdo24m: Constify lcd_ops
backlight: platform_lcd: Constify lcd_ops
backlight: otm3225a: Constify lcd_ops
backlight: ltv350qv: Constify lcd_ops
backlight: lms501kf03: Constify lcd_ops
backlight: lms283gf05: Constify lcd_ops
backlight: l4f00242t03: Constify lcd_ops
backlight: jornada720_lcd: Constify lcd_ops
...
Linus Torvalds [Wed, 22 May 2024 17:41:14 +0000 (10:41 -0700)]
Merge tag 'mfd-next-6.10' of git://git./linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for X-Powers AXP717 PMIC to AXP22X
- Add support for Rockchip RK816 PMIC to RK8XX
- Add support for TI TPS65224 PMIC to TPS6594
New Functionality:
- Add Power Off functionality to Rohm
BD71828
- Allow I2C SMBus access in Renesas RSMU
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Shift Intel support over to MSI interrupts
- Generify adding platform data away from being ACPI specific
- Use device core supplied attribute to register sysfs entries
- Replace hand-rolled functionality with generic APIs
- Utilise centrally provided helpers and macros
- Clean-up error handling
- Remove superfluous/duplicated/unused sections
- Trivial; spelling, whitespace, coding-style adaptions
- More Maple Tree conversions"
* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
dt-bindings: mfd: Use full path to other schemas
mfd: rsmu: support I2C SMBus access
dt-bindings: mfd: Convert lp873x.txt to json-schema
dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
mfd: kempld: Remove custom DMI matching code
mfd: cs42l43: Update patching revision check
dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
mfd: timberdale: Remove redundant assignment to variable err
dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
mfd: axp20x: Convert to use Maple Tree register cache
mfd:
bd71828: Remove commented code lines
mfd: intel-m10-bmc: Change staging size to a variable
dt-bindings: mfd: Add ROHM
BD71879
mfd: Tidy Kconfig dependency's parentheses
mfd: ocelot-spi: Use spi_sync_transfer()
dt-bindings: mfd: syscon: Add missing simple syscon compatibles
...
Linus Torvalds [Wed, 22 May 2024 16:56:00 +0000 (09:56 -0700)]
Merge tag 'riscv-for-linus-6.10-mw1' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
Linus Torvalds [Wed, 22 May 2024 16:43:07 +0000 (09:43 -0700)]
Merge tag 'loongarch-6.10' of git://git./linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Select some options in Kconfig
- Give a chance to build with !CONFIG_SMP
- Switch to use built-in rustc target
- Add new supported device nodes to dts
- Some bug fixes and other small changes
- Update the default config file
* tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: dts: Add new supported device nodes to Loongson-2K2000
LoongArch: dts: Add new supported device nodes to Loongson-2K0500
LoongArch: dts: Remove "disabled" state of clock controller node
LoongArch: rust: Switch to use built-in rustc target
LoongArch: Fix callchain parse error with kernel tracepoint events again
LoongArch: Give a chance to build with !CONFIG_SMP
LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT
LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
LoongArch: Select ARCH_HAS_FAST_MULTIPLIER
Linus Torvalds [Wed, 22 May 2024 16:31:01 +0000 (09:31 -0700)]
Merge tag 'microblaze-v6.10' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
- Cleanup code around removed early_printk
* tag 'microblaze-v6.10' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Remove early printk call from cpuinfo-static.c
microblaze: Remove gcc flag for non existing early_printk.c file
Linus Torvalds [Wed, 22 May 2024 16:23:18 +0000 (09:23 -0700)]
Merge tag 'ovl-update-6.10' of git://git./linux/kernel/git/overlayfs/vfs
Pull overlayfs updates from Miklos Szeredi:
- Add tmpfile support
- Clean up include
* tag 'ovl-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: remove duplicate included header
ovl: remove upper umask handling from ovl_create_upper()
ovl: implement tmpfile
Linus Torvalds [Wed, 22 May 2024 16:18:51 +0000 (09:18 -0700)]
Merge tag 'fuse-update-6.10' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add fs-verity support (Richard Fung)
- Add multi-queue support to virtio-fs (Peter-Jan Gootzen)
- Fix a bug in NOTIFY_RESEND handling (Hou Tao)
- page -> folio cleanup (Matthew Wilcox)
* tag 'fuse-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtio-fs: add multi-queue support
virtio-fs: limit number of request queues
fuse: clear FR_SENT when re-adding requests into pending list
fuse: set FR_PENDING atomically in fuse_resend()
fuse: Add initial support for fs-verity
fuse: Convert fuse_readpages_end() to use folio_end_read()
projects / linux-block.git / log