bcachefs: Don't flush btree writes more aggressively because of btree key cache

We need to flush the btree key cache when it's too dirty, because
otherwise the shrinker won't be able to reclaim memory - this is done by
journal reclaim. But journal reclaim also kicks btree node writes: this
meant that btree node writes were getting kicked much too often just
because we needed to flush btree key cache keys.

This patch splits journal pins into two different lists, and teaches
journal reclaim to not flush btree node writes when it only needs to
flush key cache keys.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Eliminate more PAGE_SIZE uses

In userspace, we don't really have a well defined PAGE_SIZE and shouln't
be relying on it. This is some more incremental work to remove
references to it.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Increase BSET_CACHELINE to 256 bytes

Linear searches have gotten cheaper relative to binary searches on
modern hardware, due to better branch prediction behaviour.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix a startup race

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix an uninitialized variable

Fortunately it was just used in an error message

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: kill bset_tree->max_key

Since we now ensure a btree node's max key fits in its packed format,
this isn't needed for the reasons it used to be - and, it was being used
inconsistently.

Also reorder struct btree a bit for performance, and kill some dead
code.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Eliminate memory barrier from fast path of journal_preres_put()

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Drop some memset() calls

gcc is emitting rep stos here, which is silly (and slow) for an 8 byte
memset.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Kill bch2_fs_usage_scratch_get()

This is an important cleanup, eliminating an unnecessary copy in the
transaction commit path.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix livelock calling bch2_mark_bkey_replicas()

The bug was that we were trying to find a replicas entry that wasn't
sorted - but, we can also simplify the code by not using
bch2_mark_bkey_replicas and instead ensuring the list of replicas
entries exists directly.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Be more careful about JOURNAL_RES_GET_RESERVED

JOURNAL_RES_GET_RESERVED should only be used for updatse that need to be
done to free up space in the journal. In particular, when we're flushing
keys from the key cache, if we're flushing them out of order we
shouldn't be using it, since we're using up our remaining space in the
journal without dropping a pin that will let us make forward progress.

With this patch, BTREE_INSERT_JOURNAL_RECLAIM without
BTREE_INSERT_JOURNAL_RESERVED may return -EAGAIN - we can't wait on
journal reclaim if we're already in journal reclaim.

This means we need to propagate these errors up to journal reclaim,
indicating that flushing a journal pin should be retried in the future.

This is prep work for a patch to change the way journal reclaim works,
to split out flushing key cache keys because the btree key cache is too
dirty from journal reclaim because we need space in the journal.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix journal deadlock

After we get a journal reservation, we need to use it - if we erorr out
of a transaction commit, we'll be eating into space in the journal and
if our transaction needs to make forward progress in order to reclaim
space in the journal, we'll deadlock.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix this_cpu_ptr() usage

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Increase commality between BTREE_ITER_NODES and BTREE_ITER_KEYS

Eventually BTREE_ITER_NODES should be going away. This patch is to fix a
transaction iterator overflow in the btree node merge path because
BTREE_ITER_NODES iterators couldn't be reused.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix BTREE_FOREGROUND_MERGE_HYSTERESIS

We were multiplying instead of dividing - oops.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Drop trans->nounlock

Since we're no longer doing btree node merging post commit, we can now
delete a bunch of code.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Move btree node merging to before transaction commit

Currently, BTREE_INSERT_NOUNLOCK makes it hard to ensure btree node
merging happens reliably - since btree node merging happens after
transaction commit, we can't drop btree locks and block when starting
the btree update.

This patch moves it to before transaction commit - and failure to do a
merge that we wanted to do just restarts the transaction.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_foreground_maybe_merge() now correctly reports lock restarts

This means that btree node splits don't have to automatically trigger a
transaction restart.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Kill bch2_btree_node_get_sibling()

This patch reworks the btree node merge path to use a second btree
iterator to get the sibling node - which means
bch2_btree_iter_get_sibling() can be deleted. Also, it uses
bch2_btree_iter_traverse_all() if necessary - which means it should be
more reliable. We don't currently even try to make it work when
trans->nounlock is set - after a BTREE_INSERT_NOUNLOCK transaction
commit, hopefully this will be a worthwhile tradeoff.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Change where merging of interior btree nodes is trigger from

Previously, we were doing btree node merging from
bch2_btree_insert_node() - but this is called from the split path, when
we're in the middle of creating new nodes and deleting new nodes and the
iterators are in a weird state.

Also, this means we're starting a new btree_update while in the middle
of an existing one, and that's asking for deadlocks.

Much simpler and saner to trigger btree node merging _after_ the whole
btree node split path is finished.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve bch2_btree_update_start()

bch2_btree_update_start() is now responsible for taking gc_lock and
upgrading the iterator to lock parent nodes - greatly simplifying error
handling and all of the callers.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add a sysfs var for average btree write size

Useful number for performance tuning.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve bch2_trans_relock()

We're getting away from relying on iter->uptodate - this changes
bch2_trans_relock() to more directly specify which iterators should be
relocked.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Move btree lock debugging to slowpath fn

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't make foreground writes wait behind journal reclaim too long

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

buckets.c fixups XXX squash

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add repair code for out of order keys in a btree node.

This just drops the offending key - in the bug report where this was
seen, it was clearly a single bit memory error, and fsck will fix the
missing key.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Free iterator in bch2_btree_delete_range_trans()

This is specifically to speed up bch2_inode_rm(), so that we're not
traversing iterators we're done with.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Have journal reclaim thread flush more aggressively

This adds a new watermark for the journal reclaim when flushing btree
key cache entries - it should try and stay ahead of where foreground
threads doing transaction commits will enter direct journal reclaim.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't use bch2_inode_find_by_inum() in move.c

Since move.c isn't aware of what subvolume we're in, we can't use the
standard inode lookup code - fortunately, we're just using it for
reading IO options.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Change inode allocation code for snapshots

For snapshots, when we allocate a new inode we want to allocate an inode
number that isn't in use in any other subvolume. We won't be able to use
ITER_SLOTS for this, inode allocation needs to change to use
BTREE_ITER_ALL_SNAPSHOTS.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Inode backpointers

This patch adds two new inode fields, bi_dir and bi_dir_offset, that
point back to the inode's dirent.

Since we're only adding fields for a single backpointer, files that have
been hardlinked won't necessarily have valid backpointers: we also add a
new inode flag, BCH_INODE_BACKPTR_UNTRUSTED, that's set if an inode has
ever had multiple links to it. That's ok, because we only really need
this functionality for directories, which can never have multiple
hardlinks - when we add subvolumes, we'll need a way to enemurate and
print subvolumes, and this will let us reconstruct a path to a subvolume
root given a subvolume root inode.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Start using bpos.snapshot field

This patch starts treating the bpos.snapshot field like part of the key
in the btree code:

* bpos_successor() and bpos_predecessor() now include the snapshot field
* Keys in btrees that will be using snapshots (extents, inodes, dirents
  and xattrs) now always have their snapshot field set to U32_MAX

The btree iterator code gets a new flag, BTREE_ITER_ALL_SNAPSHOTS, that
determines whether we're iterating over keys in all snapshots or not -
internally, this controlls whether bkey_(successor|predecessor)
increment/decrement the snapshot field, or only the higher bits of the
key.

We add a new member to struct btree_iter, iter->snapshot: when
BTREE_ITER_ALL_SNAPSHOTS is not set, iter->pos.snapshot should always
equal iter->snapshot, which will be 0 for btrees that don't use
snapshots, and alsways U32_MAX for btrees that will use snapshots
(until we enable snapshot creation).

This patch also introduces a new metadata version number, and compat
code for reading from/writing to older versions - this isn't a forced
upgrade (yet).

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Split out bpos_cmp() and bkey_cmp()

With snapshots, we're going to need to differentiate between comparisons
that should and shouldn't include the snapshot field. bpos_cmp is now
the comparison function that does include the snapshot field, used by
core btree code.

Upper level filesystem code generally does _not_ want to compare against
the snapshot field - that code wants keys to compare as equal even when
one of them is in an ancestor snapshot.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add a mechanism for running callbacks at trans commit time

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: btree key cache locking improvements

The btree key cache mutex was becoming a significant bottleneck - it was
mainly used to protect the lists of dirty, clean and freed cached keys.

This patch eliminates the dirty and clean lists - instead, when we need
to scan for keys to drop from the cache we iterate over the rhashtable,
and thus we're able to remove most uses of that lock.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Simplify btree_node_iter_init_pack_failed()

Since we now make sure to always generate packed bkey formats that can
pack the min_key of a btree node, this path should actually never
happen.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix for bch2_trans_commit() unlocking when it's not supposed to

When we pass BTREE_INSERT_NOUNLOCK bch2_trans_commit isn't supposed to
unlock after a successful commit, but it was calling
bch2_trans_cond_resched() - oops.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix packed bkey format calculation for new btree roots

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix building of aux search trees

We weren't packing the min/max keys, which was a major oversight and
completely disabled generating bkey_floats for adjacent nodes.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Generate better bkey formats when splitting nodes

On btree node split, we weren't ensuring the min_key of the new larger
node packs in the new format for this node. This triggers some painful
slowpaths in the bset.c aux search tree code - this patch fixes that by
calculating a new format for the new node with the new min_key.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Drop bkey noops

Bkey noops were introduced to deal with trimming inline data extents in
place in the btree: if the u64s field of a bkey was 0, that u64 was a
noop and we'd start looking for the next bkey immediately after it.

But extent handling has been lifted above the btree - we no longer
modify existing extents in place in the btree, and the compatibilty code
for old style extent btree nodes is gone, so we can completely drop this
code.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Increase default journal size

The default was 1/256th of the device and capped at 512MB, which is
fairly tiny these days.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Use pcpu mode of six locks for interior nodes

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Split btree_iter_traverse and bch2_btree_iter_traverse()

External (to the btree iterator code) users of bch2_btree_iter_traverse
expect that on success the iterator will be pointed at iter->pos and
have that position locked - but since we split iter->pos and
iter->real_pos, that means it has to update iter->real_pos if necessary.

Internal users don't expect it to modify iter->real_pos, so we need two
separate functions.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve inode deletion code

It had some silly redundancies.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add an .invalid method for bch2_btree_ptr_v2

It was using the method for btree_ptr_v1, but that wasn't checking all
the fields.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Include snapshot field in bch2_bpos_to_text

More prep work for snapshots.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Update iter->real_pos lazily

peek() has to update iter->real_pos - there's no need for
bch2_btree_iter_set_pos() to update it as well.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Consolidate bch2_btree_iter_peek() and peek_with_updates()

Ideally we'll be getting rid of peek_with_updates(), but the callers
will need to be checked.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve iter->real_pos handling

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Internal btree iterator renaming

This just gives some internal helpers some better names.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Kill btree_iter_peek_uptodate()

Since we're no longer doing next() immediately followed by peek(), this
optimization isn't doing anything anymore.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Iterators are now always consistent with iter->real_pos

This means bch2_btree_iter_traverse_one() can be made more efficient.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Have btree_iter_next_node() use btree_iter_set_search_pos()

btree node iterators need to obey the regular btree node invarionts
w.r.t. iter->real_pos; once they do, bch2_btree_iter_traverse will have
less that it needs to check.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Replace bch2_btree_iter_next() calls with bch2_btree_iter_advance

The way btree iterators work internally has been changing, particularly
with the iter->real_pos changes, and bch2_btree_iter_next() is no longer
hyper optimized - it's just advance followed by peek, so it's more
efficient to just call advance where we're not using the return value of
bch2_btree_iter_next().

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Get disk reservation when overwriting data in old snapshot

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Switch extent_handle_overwrites() to one key at a time

Prep work for snapshots

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Optimize bch2_btree_iter_verify_level()

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix iterator picking

comparison was wrong

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't unconditially version_upgrade in initialize

This is mkfs's job. Also, clean up the handling of feature bits some.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Validate bset version field against sb version fields

The superblock version fields need to be accurate to know whether a
filesystem is supported, thus we should be verifying them.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't overwrite snapshot field in bch2_cut_back()

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Kill bkey ops->debugcheck method

This code used to be used for running some assertions on alloc info at
runtime, but it long predates fsck and hasn't been good for much in
ages - we can delete it now.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Assert that iterators aren't being double freed

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Require all btree iterators to be freed

We keep running into occasional bugs with btree transaction iterators
overflowing - this will make those bugs more visible.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: btree_iter_set_dontneed()

This is a bit clearer than using bch2_btree_iter_free().

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fsck code refactoring

Change fsck code to always put btree iterators - also, make some flow
control improvements to deal with lock restarts better, and refactor
check_extents() to not walk extents twice for counting/checking
i_sectors.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix btree iterator leak in extent_handle_overwrites()

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't list non journal devs in journal_debug_to_text()

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add a print statement for when we go read-write

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Kill btree_iter_pos_changed()

this is used in only one place now, so just inline it into the caller.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix a btree iterator leak

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Kill reflink option

An option was added to control whether reflink support was on or off
because for a long time, reflink + inline data extent support was
missing - but that's since been fixed, so we can drop the option now.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix read retry path for indirect extents

In the read path, for retry of indirect extents to work we need to
differentiate between the location in the btree the read was for, vs.
the location where we found the data. This patch adds that plumbing to
bch_read_bio.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Consolidate bch2_read_retry and bch2_read()

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Kill ei_str_hash

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Use __bch2_trans_do() in a few more places

Minor cleanup, it was being open coded.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Have fsck check for stripe pointers matching stripe

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix locking in bch2_btree_iter_traverse_cached()

bch2_btree_iter_traverse() is supposed to ensure we have the correct
type of lock - it was downgrading if necessary, but if we entered with a
read lock it wasn't upgrading to an intent lock, oops.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: __bch2_trans_get_iter() refactoring, BTREE_ITER_NOT_EXTENTS

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Simplify bch2_btree_iter_peek_prev()

Since we added iter->real_pos, btree_iter_set_pos_to_(next|prev)_leaf no
longer modify iter->pos, so we don't have to save it at the start
anymore.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Simplify for_each_btree_key()

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix compat code for superblock

The bkey compat code wasn't being run for btree roots in the superblock
clean section - this patch fixes it to use the journal entry validate
code.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix bpos_diff()

Previously, bpos_diff() did not handle borrows correctly. Minor thing
considering how it was used, but worth fixing.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Use bch2_bpos_to_text() more consistently

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: btree_iter_prev_slot()

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Delete some dead code

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: btree_iter_live()

New helper to clean things up a bit - also, improve iter->flags
handling.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve handling of extents in bch2_trans_update()

The transaction update/commit path cares about whether it's inserting
extents or regular keys; extents require extra passes (handling of
overlapping extents) but sometimes we want to skip all that. This
clarifies things by adding a new member to btree_insert_entry specifying
whether the key being inserted is an extent, instead of overloading
BTREE_ITER_IS_EXTENTS.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Use x-macros for more enums

This patch standardizes all the enums that have associated string tables
(probably more enums should have string tables).

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Rename BTREE_ID enums for consistency with other enums

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Rename KEY_TYPE_whiteout -> KEY_TYPE_hash_whiteout

Snapshots are going to need a different whiteout key type. Also, switch
to using BCH_BKEY_TYPES() to define the bkey value accessors.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: KEY_TYPE_discard is no longer used

KEY_TYPE_discard used to be used for extent whiteouts, but when handling
over overlapping extents was lifted above the core btree code it became
unused. This patch updates various code to reflect that.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Kill support for !BTREE_NODE_NEW_EXTENT_OVERWRITE()

bcachefs has been aggressively migrating filesystems and btree nodes to
the new format for quite some time - this shouldn't affect anyone
anymore, and lets us delete a _lot_ of code. Also, it frees up
KEY_TYPE_discard for a new whiteout key type for snapshots.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix bch2_btree_cache_scan()

It was counting nodes on the freed list that it skips - because we want
to leave a few so that btree splits don't touch the allocator - as nodes
that it touched, meaning that if it was called with <= 3 nodes to
reclaim, and those nodes were on the freed list, it would never do any
work.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add a mempool for the replicas delta list

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add a mempool for btree_trans bump allocator

This allocation is required for filesystem operations to make forward
progress, thus needs a mempool.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Start journal reclaim thread earlier

Especially in userspace, we sometime run into resource exhaustion issues
with starting up threads after mark and sweep/fsck.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix for copygc getting stuck waiting for reserve to be filled

This fixes a regression from the patch
  bcachefs: Fix copygc dying on startup

In general only the allocator thread itself should be updating
ca->allocator_state, the thread waking up the allocator setting it is an
ugly hack only needed to avoid racing with the copygc threads when we're
first starting up.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>