Prashant Malani [Wed, 26 Jan 2022 19:02:20 +0000 (19:02 +0000)]
platform/chrome: cros_ec_typec: Check for EC device
commit
ffebd90532728086007038986900426544e3df4e upstream.
The Type C ACPI device on older Chromebooks is not generated correctly
(since their EC firmware doesn't support the new commands required). In
such cases, the crafted ACPI device doesn't have an EC parent, and it is
therefore not useful (it shouldn't be generated in the first place since
the EC firmware doesn't support any of the Type C commands).
To handle devices which use these older firmware revisions, check for
the parent EC device handle, and fail the probe if it's not found.
Fixes:
fdc6b21e2444 ("platform/chrome: Add Type C connector class driver")
Reported-by: Alyssa Ross <hi@alyssa.is>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Alyssa Ross <hi@alyssa.is>
Tested-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20220126190219.3095419-1-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Tue, 22 Mar 2022 16:02:05 +0000 (17:02 +0100)]
ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
commit
40d8abf364bcab23bc715a9221a3c8623956257b upstream.
If the NumEntries field in the _CPC return package is less than 2, do
not attempt to access the "Revision" element of that package, because
it may not be present then.
Fixes:
337aadff8e45 ("ACPI: Introduce CPU performance controls using CPPC")
BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fangrui Song [Tue, 22 Mar 2022 01:26:17 +0000 (18:26 -0700)]
riscv module: remove (NOLOAD)
commit
60210a3d86dc57ce4a76a366e7841dda746a33f7 upstream.
On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt, .got, and .got.plt sections which are always
SHT_PROGBITS.
In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/
D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error (later changed to a warning). Just remove (NOLOAD) to
fix the warning.
[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.
Link: https://github.com/ClangBuiltLinux/linux/issues/1597
Fixes:
ab1ef68e5401 ("RISC-V: Add sections of PLT and GOT for kernel module")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Begunkov [Fri, 25 Mar 2022 16:36:31 +0000 (16:36 +0000)]
io_uring: fix memory leak of uid in files registration
commit
c86d18f4aa93e0e66cda0e55827cd03eea6bc5f8 upstream.
When there are no files for __io_sqe_files_scm() to process in the
range, it'll free everything and return. However, it forgets to put uid.
Fixes:
08a451739a9b5 ("io_uring: allow sparse fixed file sets")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/accee442376f33ce8aaebb099d04967533efde92.1648226048.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 30 Nov 2021 10:16:41 +0000 (11:16 +0100)]
ARM: iop32x: offset IRQ numbers by 1
commit
9d67412f24cc3a2c05f35f7c856addb07a2960ce upstream.
iop32x is one of the last platforms to use IRQ 0, and this has apparently
stopped working in a 2014 cleanup without anyone noticing. This interrupt
is used for the DMA engine, so most likely this has not actually worked
in the past 7 years, but it's also not essential for using this board.
I'm splitting out this change from my GENERIC_IRQ_MULTI_HANDLER
conversion so it can be backported if anyone cares.
Fixes:
a71b092a9c68 ("ARM: Convert handle_IRQ to use __handle_domain_irq")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: take +1 offset into account in mask/unmask and init as well]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Fri, 5 Nov 2021 09:30:22 +0000 (17:30 +0800)]
ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl
commit
3cbf0e392f173ba0ce425968c8374a6aa3e90f2e upstream.
Hulk Robot reported a KASAN report about use-after-free:
==================================================================
BUG: KASAN: use-after-free in __list_del_entry_valid+0x13d/0x160
Read of size 8 at addr
ffff888035e37d98 by task ubiattach/1385
[...]
Call Trace:
klist_dec_and_del+0xa7/0x4a0
klist_put+0xc7/0x1a0
device_del+0x4d4/0xed0
cdev_device_del+0x1a/0x80
ubi_attach_mtd_dev+0x2951/0x34b0 [ubi]
ctrl_cdev_ioctl+0x286/0x2f0 [ubi]
Allocated by task 1414:
device_add+0x60a/0x18b0
cdev_device_add+0x103/0x170
ubi_create_volume+0x1118/0x1a10 [ubi]
ubi_cdev_ioctl+0xb7f/0x1ba0 [ubi]
Freed by task 1385:
cdev_device_del+0x1a/0x80
ubi_remove_volume+0x438/0x6c0 [ubi]
ubi_cdev_ioctl+0xbf4/0x1ba0 [ubi]
[...]
==================================================================
The lock held by ctrl_cdev_ioctl is ubi_devices_mutex, but the lock held
by ubi_cdev_ioctl is ubi->device_mutex. Therefore, the two locks can be
concurrent.
ctrl_cdev_ioctl contains two operations: ubi_attach and ubi_detach.
ubi_detach is bug-free because it uses reference counting to prevent
concurrency. However, uif_init and uif_close in ubi_attach may race with
ubi_cdev_ioctl.
uif_init will race with ubi_cdev_ioctl as in the following stack.
cpu1 cpu2 cpu3
_______________________|________________________|______________________
ctrl_cdev_ioctl
ubi_attach_mtd_dev
uif_init
ubi_cdev_ioctl
ubi_create_volume
cdev_device_add
ubi_add_volume
// sysfs exist
kill_volumes
ubi_cdev_ioctl
ubi_remove_volume
cdev_device_del
// first free
ubi_free_volume
cdev_del
// double free
cdev_device_del
And uif_close will race with ubi_cdev_ioctl as in the following stack.
cpu1 cpu2 cpu3
_______________________|________________________|______________________
ctrl_cdev_ioctl
ubi_attach_mtd_dev
uif_init
ubi_cdev_ioctl
ubi_create_volume
cdev_device_add
ubi_debugfs_init_dev
//error goto out_uif;
uif_close
kill_volumes
ubi_cdev_ioctl
ubi_remove_volume
cdev_device_del
// first free
ubi_free_volume
// double free
The cause of this problem is that commit
714fb87e8bc0 make device
"available" before it becomes accessible via sysfs. Therefore, we
roll back the modification. We will fix the race condition between
ubi device creation and udev by removing ubi_get_device in
vol_attribute_show and dev_attribute_show.This avoids accessing
uninitialized ubi_devices[ubi_num].
ubi_get_device is used to prevent devices from being deleted during
sysfs execution. However, now kernfs ensures that devices will not
be deleted before all reference counting are released.
The key process is shown in the following stack.
device_del
device_remove_attrs
device_remove_groups
sysfs_remove_groups
sysfs_remove_group
remove_files
kernfs_remove_by_name
kernfs_remove_by_name_ns
__kernfs_remove
kernfs_drain
Fixes:
714fb87e8bc0 ("ubi: Fix race condition between ubi device creation and udev")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiaxin Yu [Sat, 19 Mar 2022 12:03:25 +0000 (20:03 +0800)]
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs
commit
a7663c89f4193dbf717572e46e5a3251940dbdc8 upstream.
Fixes the following build errors when mt6358 is configured as module:
>> ERROR: modpost: "mt6358_set_mtkaif_protocol"
>> [sound/soc/mediatek/mt8186/mt8186-mt6366-rt1019-rt5682s.ko] undefined!
>> ERROR: modpost: "mt6358_set_mtkaif_protocol"
>> [sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.ko] undefined!
Fixes:
6a8d4198ca80 ("ASoC: mediatek: mt6358: add codec driver")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220319120325.11882-1-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Neuschäfer [Sat, 5 Feb 2022 15:53:30 +0000 (16:53 +0100)]
pinctrl: nuvoton: npcm7xx: Use %zu printk format for ARRAY_SIZE()
commit
9d0f18bca3b557ae5d2128661ac06d33b3f45c0a upstream.
When compile-testing on 64-bit architectures, GCC complains about the
mismatch of types between the %d format specifier and value returned by
ARRAY_LENGTH(). Use %zu, which is correct everywhere.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
3b588e43ee5c7 ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205155332.1308899-2-j.neuschaefer@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Neuschäfer [Sat, 5 Feb 2022 15:53:31 +0000 (16:53 +0100)]
pinctrl: nuvoton: npcm7xx: Rename DS() macro to DSTR()
commit
603501c16431c56f74eaef1ee1390f60a30c2187 upstream.
The name "DS" is defined in arch/x86/um/shared/sysdep/ptrace_64.h,
which results in a compiler warning when build-testing on ARCH=um.
Rename this driver's "DS" macro to DSTR so avoid this collision.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
3b588e43ee5c7 ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205155332.1308899-3-j.neuschaefer@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqian Lin [Wed, 5 Jan 2022 09:21:13 +0000 (09:21 +0000)]
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
commit
d055ef3a2c6919cff504ae3b710c96318d545fd2 upstream.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes:
2d63908bdbfb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220105092114.23932-1-linmq006@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen-Yu Tsai [Tue, 8 Mar 2022 10:09:46 +0000 (18:09 +0800)]
pinctrl: pinconf-generic: Print arguments for bias-pull-*
commit
188e5834b930acd03ad3cf7c5e7aa24db9665a29 upstream.
The bias-pull-* properties, or PIN_CONFIG_BIAS_PULL_* pin config
parameters, accept optional arguments in ohms denoting the strength of
the pin bias.
Print these values out in debugfs as well.
Fixes:
eec450713e5c ("pinctrl: pinconf-generic: Add flag to print arguments")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-2-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 28 Mar 2022 17:07:04 +0000 (18:07 +0100)]
watch_queue: Free the page array when watch_queue is dismantled
commit
b490207017ba237d97b735b2aa66dc241ccd18f5 upstream.
Commit
7ea1a0124b6d ("watch_queue: Free the alloc bitmap when the
watch_queue is torn down") took care of the bitmap, but not the page
array.
BUG: memory leak
unreferenced object 0xffff88810d9bc140 (size 32):
comm "syz-executor335", pid 3603, jiffies
4294946994 (age 12.840s)
hex dump (first 32 bytes):
40 a7 40 04 00 ea ff ff 00 00 00 00 00 00 00 00 @.@.............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
kmalloc_array include/linux/slab.h:621 [inline]
kcalloc include/linux/slab.h:652 [inline]
watch_queue_set_size+0x12f/0x2e0 kernel/watch_queue.c:251
pipe_ioctl+0x82/0x140 fs/pipe.c:632
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
Reported-by: syzbot+25ea042ae28f3888727a@syzkaller.appspotmail.com
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20220322004654.618274-1-eric.dumazet@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herbert Xu [Wed, 16 Mar 2022 22:55:13 +0000 (10:55 +1200)]
crypto: arm/aes-neonbs-cbc - Select generic cbc and aes
commit
c8bd296cca3434b13b28b074eaeb78a23284de77 upstream.
The algorithm __cbc-aes-neonbs requires a fallback so we need
to select the config options for them or otherwise it will fail
to register on boot-up.
Fixes:
00b99ad2bac2 ("crypto: arm/aes-neonbs - Use generic cbc...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Gong [Mon, 7 Feb 2022 01:52:06 +0000 (09:52 +0800)]
mailbox: imx: fix wakeup failure from freeze mode
commit
892cb524ae8a27bf5e42f711318371acd9a9f74a upstream.
Since IRQF_NO_SUSPEND used for imx mailbox driver, that means this irq
can't be used for wakeup source so that can't wakeup from freeze mode.
Add pm_system_wakeup() to wakeup from freeze mode.
Fixes:
b7b2796b9b31e("mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Wed, 30 Mar 2022 14:39:16 +0000 (15:39 +0100)]
rxrpc: Fix call timer start racing with call destruction
commit
4a7f62f91933c8ae5308f9127fd8ea48188b6bc3 upstream.
The rxrpc_call struct has a timer used to handle various timed events
relating to a call. This timer can get started from the packet input
routines that are run in softirq mode with just the RCU read lock held.
Unfortunately, because only the RCU read lock is held - and neither ref or
other lock is taken - the call can start getting destroyed at the same time
a packet comes in addressed to that call. This causes the timer - which
was already stopped - to get restarted. Later, the timer dispatch code may
then oops if the timer got deallocated first.
Fix this by trying to take a ref on the rxrpc_call struct and, if
successful, passing that ref along to the timer. If the timer was already
running, the ref is discarded.
The timer completion routine can then pass the ref along to the call's work
item when it queues it. If the timer or work item where already
queued/running, the extra ref is discarded.
Fixes:
a158bdd3247b ("rxrpc: Fix call timeouts")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2022-March/005073.html
Link: https://lore.kernel.org/r/164865115696.2943015.11097991776647323586.stgit@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guangbin Huang [Wed, 30 Mar 2022 13:45:06 +0000 (21:45 +0800)]
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
commit
7ed258f12ec5ce855f15cdfb5710361dc82fe899 upstream.
When user delete vlan 0, as driver will not delete vlan 0 for hardware in
function hclge_set_vlan_filter_hw(), so vlan 0 in software vlan talbe should
not be deleted.
Fixes:
fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Price [Tue, 22 Mar 2022 19:05:51 +0000 (19:05 +0000)]
gfs2: Make sure FITRIM minlen is rounded up to fs block size
commit
27ca8273fda398638ca994a207323a85b6d81190 upstream.
Per fstrim(8) we must round up the minlen argument to the fs block size.
The current calculation doesn't take into account devices that have a
discard granularity and requested minlen less than 1 fs block, so the
value can get shifted away to zero in the translation to fs blocks.
The zero minlen passed to gfs2_rgrp_send_discards() then allows
sb_issue_discard() to be called with nr_sects == 0 which returns -EINVAL
and results in gfs2_rgrp_send_discards() returning -EIO.
Make sure minlen is never < 1 fs block by taking the max of the
requested minlen and the fs block size before comparing to the device's
discard granularity and shifting to fs blocks.
Fixes:
076f0faa764ab ("GFS2: Fix FITRIM argument handling")
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Rix [Sat, 26 Mar 2022 19:42:36 +0000 (12:42 -0700)]
rtc: check if __rtc_read_time was successful
commit
915593a7a663b2ad08b895a5f3ba8b19d89d4ebf upstream.
Clang static analysis reports this issue
interface.c:810:8: warning: Passed-by-value struct
argument contains uninitialized data
now = rtc_tm_to_ktime(tm);
^~~~~~~~~~~~~~~~~~~
tm is set by a successful call to __rtc_read_time()
but its return status is not checked. Check if
it was successful before setting the enabled flag.
Move the decl of err to function scope.
Fixes:
2b2f5ff00f63 ("rtc: interface: ignore expired timers when enqueuing new timers")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220326194236.2916310-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew Wilcox (Oracle) [Thu, 31 Mar 2022 12:27:09 +0000 (08:27 -0400)]
XArray: Update the LRU list in xas_split()
commit
3ed4bb77156da0bc732847c8c9df92454c1fbeea upstream.
When splitting a value entry, we may need to add the new nodes to the LRU
list and remove the parent node from the LRU list. The WARN_ON checks
in shadow_lru_isolate() catch this oversight. This bug was latent
until we stopped splitting folios in shrink_page_list() with commit
820c4e2e6f51 ("mm/vmscan: Free non-shmem folios without splitting them").
That allows the creation of large shadow entries, and subsequently when
trying to page in a small page, we will split the large shadow entry
in __filemap_add_folio().
Fixes:
8fc75643c5e1 ("XArray: add xas_split")
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Rix [Sat, 19 Mar 2022 15:31:28 +0000 (08:31 -0700)]
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value
commit
fa7b514d2b2894e052b8e94c7a29feb98e90093f upstream.
Clang static analysis reports this issue:
| mcp251xfd-core.c:1813:7: warning: The left operand
| of '&' is a garbage value
| FIELD_GET(MCP251XFD_REG_DEVID_ID_MASK, dev_id),
| ^ ~~~~~~
dev_id is set in a successful call to mcp251xfd_register_get_dev_id().
Though the status of calls made by mcp251xfd_register_get_dev_id() are
checked and handled, their status' are not returned. So return err.
Fixes:
55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Link: https://lore.kernel.org/all/20220319153128.2164120-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Skripkin [Sun, 13 Mar 2022 10:09:03 +0000 (13:09 +0300)]
can: mcba_usb: properly check endpoint type
commit
136bed0bfd3bc9c95c88aafff2d22ecb3a919f23 upstream.
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. We should check that in endpoint is actually present to
prevent this warning.
Found pipes are now saved to struct mcba_priv and code uses them
directly instead of making pipes in place.
Fail log:
| usb 5-1: BOGUS urb xfer, pipe 3 != type 1
| WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| Modules linked in:
| CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted
5.17.0-rc6-syzkaller-00184-g38f80f42147f #0
| Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
| Workqueue: usb_hub_wq hub_event
| RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| ...
| Call Trace:
| <TASK>
| mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline]
| mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858
| usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
| call_driver_probe drivers/base/dd.c:517 [inline]
Fixes:
51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/20220313100903.10868-1-paskripkin@gmail.com
Reported-and-tested-by: syzbot+3bc1dce0cc0052d60fde@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangyu Hua [Fri, 11 Mar 2022 08:02:08 +0000 (16:02 +0800)]
can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path
commit
04c9b00ba83594a29813d6b1fb8fdc93a3915174 upstream.
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Fixes:
51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/20220311080208.45047-1-hbh25y@gmail.com
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew Wilcox (Oracle) [Mon, 28 Mar 2022 23:25:11 +0000 (19:25 -0400)]
XArray: Fix xas_create_range() when multi-order entry present
commit
3e3c658055c002900982513e289398a1aad4a488 upstream.
If there is already an entry present that is of order >= XA_CHUNK_SHIFT
when we call xas_create_range(), xas_create_range() will misinterpret
that entry as a node and dereference xa_node->parent, generally leading
to a crash that looks something like this:
general protection fault, probably for non-canonical address 0xdffffc0000000001:
0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 32 Comm: khugepaged Not tainted
5.17.0-rc8-syzkaller-00003-g56e337f2cf13 #0
RIP: 0010:xa_parent_locked include/linux/xarray.h:1207 [inline]
RIP: 0010:xas_create_range+0x2d9/0x6e0 lib/xarray.c:725
It's deterministically reproducable once you know what the problem is,
but producing it in a live kernel requires khugepaged to hit a race.
While the problem has been present since xas_create_range() was
introduced, I'm not aware of a way to hit it before the page cache was
converted to use multi-index entries.
Fixes:
6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Reported-by: syzbot+0d2b0bf32ca5cfd09f2e@syzkaller.appspotmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason A. Donenfeld [Wed, 30 Mar 2022 01:31:27 +0000 (21:31 -0400)]
wireguard: socket: ignore v6 endpoints when ipv6 is disabled
commit
77fc73ac89be96ec8f39e8efa53885caa7cb3645 upstream.
The previous commit fixed a memory leak on the send path in the event
that IPv6 is disabled at compile time, but how did a packet even arrive
there to begin with? It turns out we have previously allowed IPv6
endpoints even when IPv6 support is disabled at compile time. This is
awkward and inconsistent. Instead, let's just ignore all things IPv6,
the same way we do other malformed endpoints, in the case where IPv6 is
disabled.
Fixes:
e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang Hai [Wed, 30 Mar 2022 01:31:26 +0000 (21:31 -0400)]
wireguard: socket: free skb in send6 when ipv6 is disabled
commit
bbbf962d9460194993ee1943a793a0a0af4a7fbf upstream.
I got a memory leak report:
unreferenced object 0xffff8881191fc040 (size 232):
comm "kworker/u17:0", pid 23193, jiffies
4295238848 (age 3464.870s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0
[<
ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340
[<
ffffffff832974fb>] __alloc_skb+0x1db/0x200
[<
ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0
[<
ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110
[<
ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30
[<
ffffffff8119c558>] process_one_work+0x2e8/0x770
[<
ffffffff8119ca2a>] worker_thread+0x4a/0x4b0
[<
ffffffff811a88e0>] kthread+0x120/0x160
[<
ffffffff8100242f>] ret_from_fork+0x1f/0x30
In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_
buffer_to_peer(), the semantics of send6() is required to free skb. But
when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it
to fix this bug.
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Fixes:
e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason A. Donenfeld [Wed, 30 Mar 2022 01:31:24 +0000 (21:31 -0400)]
wireguard: queueing: use CFI-safe ptr_ring cleanup function
commit
ec59f128a9bd4255798abb1e06ac3b442f46ef68 upstream.
We make too nuanced use of ptr_ring to entirely move to the skb_array
wrappers, but we at least should avoid the naughty function pointer cast
when cleaning up skbs. Otherwise RAP/CFI will honk at us. This patch
uses the __skb_array_destroy_skb wrapper for the cleanup, rather than
directly providing kfree_skb, which is what other drivers in the same
situation do too.
Reported-by: PaX Team <pageexec@freemail.hu>
Fixes:
886fcee939ad ("wireguard: receive: use ring buffer for incoming handshakes")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Tue, 15 Feb 2022 04:07:36 +0000 (12:07 +0800)]
ubifs: rename_whiteout: correct old_dir size computing
commit
705757274599e2e064dd3054aabc74e8af31a095 upstream.
When renaming the whiteout file, the old whiteout file is not deleted.
Therefore, we add the old dentry size to the old dir like XFS.
Otherwise, an error may be reported due to `fscki->calc_sz != fscki->size`
in check_indes.
Fixes:
9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Mon, 27 Dec 2021 03:22:41 +0000 (11:22 +0800)]
ubifs: Fix to add refcount once page is set private
commit
3b67db8a6ca83e6ff90b756d3da0c966f61cd37b upstream.
MM defined the rule [1] very clearly that once page was set with PG_private
flag, we should increment the refcount in that page, also main flows like
pageout(), migrate_page() will assume there is one additional page
reference count if page_has_private() returns true. Otherwise, we may
get a BUG in page migration:
page:
0000000080d05b9d refcount:-1 mapcount:0 mapping:
000000005f4d82a8
index:0xe2 pfn:0x14c12
aops:ubifs_file_address_operations [ubifs] ino:8f1 dentry name:"f30e"
flags: 0x1fffff80002405(locked|uptodate|owner_priv_1|private|node=0|
zone=1|lastcpupid=0x1fffff)
page dumped because: VM_BUG_ON_PAGE(page_count(page) != 0)
------------[ cut here ]------------
kernel BUG at include/linux/page_ref.h:184!
invalid opcode: 0000 [#1] SMP
CPU: 3 PID: 38 Comm: kcompactd0 Not tainted 5.15.0-rc5
RIP: 0010:migrate_page_move_mapping+0xac3/0xe70
Call Trace:
ubifs_migrate_page+0x22/0xc0 [ubifs]
move_to_new_page+0xb4/0x600
migrate_pages+0x1523/0x1cc0
compact_zone+0x8c5/0x14b0
kcompactd+0x2bc/0x560
kthread+0x18c/0x1e0
ret_from_fork+0x1f/0x30
Before the time, we should make clean a concept, what does refcount means
in page gotten from grab_cache_page_write_begin(). There are 2 situations:
Situation 1: refcount is 3, page is created by __page_cache_alloc.
TYPE_A - the write process is using this page
TYPE_B - page is assigned to one certain mapping by calling
__add_to_page_cache_locked()
TYPE_C - page is added into pagevec list corresponding current cpu by
calling lru_cache_add()
Situation 2: refcount is 2, page is gotten from the mapping's tree
TYPE_B - page has been assigned to one certain mapping
TYPE_A - the write process is using this page (by calling
page_cache_get_speculative())
Filesystem releases one refcount by calling put_page() in xxx_write_end(),
the released refcount corresponds to TYPE_A (write task is using it). If
there are any processes using a page, page migration process will skip the
page by judging whether expected_page_refs() equals to page refcount.
The BUG is caused by following process:
PA(cpu 0) kcompactd(cpu 1)
compact_zone
ubifs_write_begin
page_a = grab_cache_page_write_begin
add_to_page_cache_lru
lru_cache_add
pagevec_add // put page into cpu 0's pagevec
(refcnf = 3, for page creation process)
ubifs_write_end
SetPagePrivate(page_a) // doesn't increase page count !
unlock_page(page_a)
put_page(page_a) // refcnt = 2
[...]
PB(cpu 0)
filemap_read
filemap_get_pages
add_to_page_cache_lru
lru_cache_add
__pagevec_lru_add // traverse all pages in cpu 0's pagevec
__pagevec_lru_add_fn
SetPageLRU(page_a)
isolate_migratepages
isolate_migratepages_block
get_page_unless_zero(page_a)
// refcnt = 3
list_add(page_a, from_list)
migrate_pages(from_list)
__unmap_and_move
move_to_new_page
ubifs_migrate_page(page_a)
migrate_page_move_mapping
expected_page_refs get 3
(migration[1] + mapping[1] + private[1])
release_pages
put_page_testzero(page_a) // refcnt = 3
page_ref_freeze // refcnt = 0
page_ref_dec_and_test(0 - 1 = -1)
page_ref_unfreeze
VM_BUG_ON_PAGE(-1 != 0, page)
UBIFS doesn't increase the page refcount after setting private flag, which
leads to page migration task believes the page is not used by any other
processes, so the page is migrated. This causes concurrent accessing on
page refcount between put_page() called by other process(eg. read process
calls lru_cache_add) and page_ref_unfreeze() called by migration task.
Actually zhangjun has tried to fix this problem [2] by recalculating page
refcnt in ubifs_migrate_page(). It's better to follow MM rules [1], because
just like Kirill suggested in [2], we need to check all users of
page_has_private() helper. Like f2fs does in [3], fix it by adding/deleting
refcount when setting/clearing private for a page. BTW, according to [4],
we set 'page->private' as 1 because ubifs just simply SetPagePrivate().
And, [5] provided a common helper to set/clear page private, ubifs can
use this helper following the example of iomap, afs, btrfs, etc.
Jump [6] to find a reproducer.
[1] https://lore.kernel.org/lkml/
2b19b3c4-2bc4-15fa-15cc-
27a13e5c7af1@aol.com
[2] https://www.spinics.net/lists/linux-mtd/msg04018.html
[3] http://lkml.iu.edu/hypermail/linux/kernel/1903.0/03313.html
[4] https://lore.kernel.org/linux-f2fs-devel/
20210422154705.GO3596236@casper.infradead.org
[5] https://lore.kernel.org/all/
20200517214718.468-1-guoqing.jiang@cloud.ionos.com
[6] https://bugzilla.kernel.org/show_bug.cgi?id=214961
Fixes:
1e51764a3c2ac0 ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Mon, 27 Dec 2021 03:22:40 +0000 (11:22 +0800)]
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
commit
4f2262a334641e05f645364d5ade1f565c85f20b upstream.
Function ubifs_wbuf_write_nolock() may access buf out of bounds in
following process:
ubifs_wbuf_write_nolock():
aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096
if (aligned_len <= wbuf->avail) ... // Not satisfy
if (wbuf->used) {
ubifs_leb_write() // Fill some data in avail wbuf
len -= wbuf->avail; // len is still not 8-bytes aligned
aligned_len -= wbuf->avail;
}
n = aligned_len >> c->max_write_shift;
if (n) {
n <<= c->max_write_shift;
err = ubifs_leb_write(c, wbuf->lnum, buf + written,
wbuf->offs, n);
// n > len, read out of bounds less than 8(n-len) bytes
}
, which can be catched by KASAN:
=========================================================
BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0
Read of size 4 at addr
ffff888105594ff8 by task kworker/u8:4/128
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call Trace:
kasan_report.cold+0x81/0x165
nand_write_page_swecc+0xa9/0x160
ubifs_leb_write+0xf2/0x1b0 [ubifs]
ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs]
write_head+0xdc/0x1c0 [ubifs]
ubifs_jnl_write_inode+0x627/0x960 [ubifs]
wb_workfn+0x8af/0xb80
Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8
bytes aligned, the 'len' represents the true length of buf (which is
allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so
ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully
to write leb safely.
Fetch a reproducer in [Link].
Fixes:
1e51764a3c2ac0 ("UBIFS: add new flash file system")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214785
Reported-by: Chengsong Ke <kechengsong@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Mon, 27 Dec 2021 03:22:39 +0000 (11:22 +0800)]
ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
commit
1b83ec057db16b4d0697dc21ef7a9743b6041f72 upstream.
Make 'ui->data_len' aligned with 8 bytes before it is assigned to
dirtied_ino_d. Since
8871d84c8f8b0c6b("ubifs: convert to fileattr")
applied, 'setflags()' only affects regular files and directories, only
xattr inode, symlink inode and special inode(pipe/char_dev/block_dev)
have none- zero 'ui->data_len' field, so assertion
'!(req->dirtied_ino_d & 7)' cannot fail in ubifs_budget_space().
To avoid assertion fails in future evolution(eg. setflags can operate
special inodes), it's better to make dirtied_ino_d 8 bytes aligned,
after all aligned size is still zero for regular files.
Fixes:
1e51764a3c2ac05a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Mon, 27 Dec 2021 03:22:35 +0000 (11:22 +0800)]
ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
commit
716b4573026bcbfa7b58ed19fe15554bac66b082 upstream.
whiteout inode should be put when do_tmpfile() failed if inode has been
initialized. Otherwise we will get following warning during umount:
UBIFS error (ubi0:0 pid 1494): ubifs_assert_failed [ubifs]: UBIFS
assert failed: c->bi.dd_growth == 0, in fs/ubifs/super.c:1930
VFS: Busy inodes after unmount of ubifs. Self-destruct in 5 seconds.
Fixes:
9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Mon, 27 Dec 2021 03:22:33 +0000 (11:22 +0800)]
ubifs: Fix deadlock in concurrent rename whiteout and inode writeback
commit
afd427048047e8efdedab30e8888044e2be5aa9c upstream.
Following hung tasks:
[ 77.028764] task:kworker/u8:4 state:D stack: 0 pid: 132
[ 77.028820] Call Trace:
[ 77.029027] schedule+0x8c/0x1b0
[ 77.029067] mutex_lock+0x50/0x60
[ 77.029074] ubifs_write_inode+0x68/0x1f0 [ubifs]
[ 77.029117] __writeback_single_inode+0x43c/0x570
[ 77.029128] writeback_sb_inodes+0x259/0x740
[ 77.029148] wb_writeback+0x107/0x4d0
[ 77.029163] wb_workfn+0x162/0x7b0
[ 92.390442] task:aa state:D stack: 0 pid: 1506
[ 92.390448] Call Trace:
[ 92.390458] schedule+0x8c/0x1b0
[ 92.390461] wb_wait_for_completion+0x82/0xd0
[ 92.390469] __writeback_inodes_sb_nr+0xb2/0x110
[ 92.390472] writeback_inodes_sb_nr+0x14/0x20
[ 92.390476] ubifs_budget_space+0x705/0xdd0 [ubifs]
[ 92.390503] do_rename.cold+0x7f/0x187 [ubifs]
[ 92.390549] ubifs_rename+0x8b/0x180 [ubifs]
[ 92.390571] vfs_rename+0xdb2/0x1170
[ 92.390580] do_renameat2+0x554/0x770
, are caused by concurrent rename whiteout and inode writeback processes:
rename_whiteout(Thread 1) wb_workfn(Thread2)
ubifs_rename
do_rename
lock_4_inodes (Hold ui_mutex)
ubifs_budget_space
make_free_space
shrink_liability
__writeback_inodes_sb_nr
bdi_split_work_to_wbs (Queue new wb work)
wb_do_writeback(wb work)
__writeback_single_inode
ubifs_write_inode
LOCK(ui_mutex)
↑
wb_wait_for_completion (Wait wb work) <-- deadlock!
Reproducer (Detail program in [Link]):
1. SYS_renameat2("/mp/dir/file", "/mp/dir/whiteout", RENAME_WHITEOUT)
2. Consume out of space before kernel(mdelay) doing budget for whiteout
Fix it by doing whiteout space budget before locking ubifs inodes.
BTW, it also fixes wrong goto tag 'out_release' in whiteout budget
error handling path(It should at least recover dir i_size and unlock
4 ubifs inodes).
Fixes:
9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214733
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Mon, 27 Dec 2021 03:22:32 +0000 (11:22 +0800)]
ubifs: rename_whiteout: Fix double free for whiteout_ui->data
commit
40a8f0d5e7b3999f096570edab71c345da812e3e upstream.
'whiteout_ui->data' will be freed twice if space budget fail for
rename whiteout operation as following process:
rename_whiteout
dev = kmalloc
whiteout_ui->data = dev
kfree(whiteout_ui->data) // Free first time
iput(whiteout)
ubifs_free_inode
kfree(ui->data) // Double free!
KASAN reports:
==================================================================
BUG: KASAN: double-free or invalid-free in ubifs_free_inode+0x4f/0x70
Call Trace:
kfree+0x117/0x490
ubifs_free_inode+0x4f/0x70 [ubifs]
i_callback+0x30/0x60
rcu_do_batch+0x366/0xac0
__do_softirq+0x133/0x57f
Allocated by task 1506:
kmem_cache_alloc_trace+0x3c2/0x7a0
do_rename+0x9b7/0x1150 [ubifs]
ubifs_rename+0x106/0x1f0 [ubifs]
do_syscall_64+0x35/0x80
Freed by task 1506:
kfree+0x117/0x490
do_rename.cold+0x53/0x8a [ubifs]
ubifs_rename+0x106/0x1f0 [ubifs]
do_syscall_64+0x35/0x80
The buggy address belongs to the object at
ffff88810238bed8 which
belongs to the cache kmalloc-8 of size 8
==================================================================
Let ubifs_free_inode() free 'whiteout_ui->data'. BTW, delete unused
assignment 'whiteout_ui->data_len = 0', process 'ubifs_evict_inode()
-> ubifs_jnl_delete_inode() -> ubifs_jnl_write_inode()' doesn't need it
(because 'inc_nlink(whiteout)' won't be excuted by 'goto out_release',
and the nlink of whiteout inode is 0).
Fixes:
9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ammar Faizi [Thu, 24 Feb 2022 18:58:36 +0000 (01:58 +0700)]
ASoC: SOF: Intel: Fix NULL ptr dereference when ENOMEM
commit
b7fb0ae09009d076964afe4c1a2bde1ee2bd88a9 upstream.
Do not call snd_dma_free_pages() when snd_dma_alloc_pages() returns
-ENOMEM because it leads to a NULL pointer dereference bug.
The dmesg says:
[ T1387] sof-audio-pci-intel-tgl 0000:00:1f.3: error: memory alloc failed: -12
[ T1387] BUG: kernel NULL pointer dereference, address:
0000000000000000
[ T1387] #PF: supervisor read access in kernel mode
[ T1387] #PF: error_code(0x0000) - not-present page
[ T1387] PGD 0 P4D 0
[ T1387] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ T1387] CPU: 6 PID: 1387 Comm: alsa-sink-HDA A Tainted: G W
5.17.0-rc4-superb-owl-00055-g80d47f5de5e3
[ T1387] Hardware name: HP HP Laptop 14s-dq2xxx/87FD, BIOS F.15 09/15/2021
[ T1387] RIP: 0010:dma_free_noncontiguous+0x37/0x80
[ T1387] Code: [... snip ...]
[ T1387] RSP: 0000:
ffffc90002b87770 EFLAGS:
00010246
[ T1387] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000000
[ T1387] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff888101db30d0
[ T1387] RBP:
00000000fffffff4 R08:
0000000000000000 R09:
0000000000000000
[ T1387] R10:
0000000000000000 R11:
ffffc90002b874d0 R12:
0000000000000001
[ T1387] R13:
0000000000058000 R14:
ffff888105260c68 R15:
ffff888105260828
[ T1387] FS:
00007f42e2ffd640(0000) GS:
ffff888466b80000(0000) knlGS:
0000000000000000
[ T1387] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ T1387] CR2:
0000000000000000 CR3:
000000014acf0003 CR4:
0000000000770ee0
[ T1387] PKRU:
55555554
[ T1387] Call Trace:
[ T1387] <TASK>
[ T1387] cl_stream_prepare+0x10a/0x120 [snd_sof_intel_hda_common
146addf995b9279ae7f509621078cccbe4f875e1]
[... snip ...]
[ T1387] </TASK>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Keyon Jie <yang.jie@linux.intel.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Rander Wang <rander.wang@intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: sound-open-firmware@alsa-project.org
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v5.2+
Fixes:
d16046ffa6de040bf580a64d5f4d0aa18258a854 ("ASoC: SOF: Intel: Add Intel specific HDA firmware loader")
Link: https://lore.kernel.org/lkml/20220224145124.15985-1-ammarfaizi2@gnuweeb.org/
Link: https://lore.kernel.org/lkml/20220224180850.34592-1-ammarfaizi2@gnuweeb.org/
Link: https://lore.kernel.org/lkml/20220224182818.40301-1-ammarfaizi2@gnuweeb.org/
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://lore.kernel.org/r/20220224185836.44907-1-ammarfaizi2@gnuweeb.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ammarfaizi2: Backport to Linux 5.10 LTS]
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yi Wang [Wed, 9 Mar 2022 11:30:25 +0000 (19:30 +0800)]
KVM: SVM: fix panic on out-of-bounds guest IRQ
commit
a80ced6ea514000d34bf1239d47553de0d1ee89e upstream.
As guest_irq is coming from KVM_IRQFD API call, it may trigger
crash in svm_update_pi_irte() due to out-of-bounds:
crash> bt
PID: 22218 TASK:
ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8"
#0 [
ffffb1ba6707fa40] machine_kexec at
ffffffff8565b397
#1 [
ffffb1ba6707fa90] __crash_kexec at
ffffffff85788a6d
#2 [
ffffb1ba6707fb58] crash_kexec at
ffffffff8578995d
#3 [
ffffb1ba6707fb70] oops_end at
ffffffff85623c0d
#4 [
ffffb1ba6707fb90] no_context at
ffffffff856692c9
#5 [
ffffb1ba6707fbf8] exc_page_fault at
ffffffff85f95b51
#6 [
ffffb1ba6707fc50] asm_exc_page_fault at
ffffffff86000ace
[exception RIP: svm_update_pi_irte+227]
RIP:
ffffffffc0761b53 RSP:
ffffb1ba6707fd08 RFLAGS:
00010086
RAX:
ffffb1ba6707fd78 RBX:
ffffb1ba66d91000 RCX:
0000000000000001
RDX:
00003c803f63f1c0 RSI:
000000000000019a RDI:
ffffb1ba66db2ab8
RBP:
000000000000019a R8:
0000000000000040 R9:
ffff94ca41b82200
R10:
ffffffffffffffcf R11:
0000000000000001 R12:
0000000000000001
R13:
0000000000000001 R14:
ffffffffffffffcf R15:
000000000000005f
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0018
#7 [
ffffb1ba6707fdb8] kvm_irq_routing_update at
ffffffffc09f19a1 [kvm]
#8 [
ffffb1ba6707fde0] kvm_set_irq_routing at
ffffffffc09f2133 [kvm]
#9 [
ffffb1ba6707fe18] kvm_vm_ioctl at
ffffffffc09ef544 [kvm]
RIP:
00007f143c36488b RSP:
00007f143a4e04b8 RFLAGS:
00000246
RAX:
ffffffffffffffda RBX:
00007f05780041d0 RCX:
00007f143c36488b
RDX:
00007f05780041d0 RSI:
000000004008ae6a RDI:
0000000000000020
RBP:
00000000000004e8 R8:
0000000000000008 R9:
00007f05780041e0
R10:
00007f0578004560 R11:
0000000000000246 R12:
00000000000004e0
R13:
000000000000001a R14:
00007f1424001c60 R15:
00007f0578003bc0
ORIG_RAX:
0000000000000010 CS: 0033 SS: 002b
Vmx have been fix this in commit
3a8b0677fc61 (KVM: VMX: Do not BUG() on
out-of-bounds guest IRQ), so we can just copy source from that to fix
this.
Co-developed-by: Yi Liu <liu.yi24@zte.com.cn>
Signed-off-by: Yi Liu <liu.yi24@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Message-Id: <
20220309113025.44469-1-wang.yi59@zte.com.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li RongQing [Wed, 9 Mar 2022 08:35:44 +0000 (16:35 +0800)]
KVM: x86: fix sending PV IPI
commit
c15e0ae42c8e5a61e9aca8aac920517cf7b3e94e upstream.
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes:
aaffcfd1e82 ("KVM: X86: Implement PV IPIs in linux guest")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <
1646814944-51801-1-git-send-email-lirongqing@baidu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Matlack [Thu, 3 Mar 2022 18:33:27 +0000 (18:33 +0000)]
KVM: Prevent module exit until all VMs are freed
commit
5f6de5cbebee925a612856fce6f9182bb3eee0db upstream.
Tie the lifetime the KVM module to the lifetime of each VM via
kvm.users_count. This way anything that grabs a reference to the VM via
kvm_get_kvm() cannot accidentally outlive the KVM module.
Prior to this commit, the lifetime of the KVM module was tied to the
lifetime of /dev/kvm file descriptors, VM file descriptors, and vCPU
file descriptors by their respective file_operations "owner" field.
This approach is insufficient because references grabbed via
kvm_get_kvm() do not prevent closing any of the aforementioned file
descriptors.
This fixes a long standing theoretical bug in KVM that at least affects
async page faults. kvm_setup_async_pf() grabs a reference via
kvm_get_kvm(), and drops it in an asynchronous work callback. Nothing
prevents the VM file descriptor from being closed and the KVM module
from being unloaded before this callback runs.
Fixes:
af585b921e5d ("KVM: Halt vcpu if page it tries to access is swapped out")
Fixes:
3d3aab1b973b ("KVM: set owner of cpu and vm file operations")
Cc: stable@vger.kernel.org
Suggested-by: Ben Gardon <bgardon@google.com>
[ Based on a patch from Ben implemented for Google's kernel. ]
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220303183328.
1499189-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Kuznetsov [Fri, 25 Mar 2022 13:21:40 +0000 (14:21 +0100)]
KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated
commit
b1e34d325397a33d97d845e312d7cf2a8b646b44 upstream.
Setting non-zero values to SYNIC/STIMER MSRs activates certain features,
this should not happen when KVM_CAP_HYPERV_SYNIC{,2} was not activated.
Note, it would've been better to forbid writing anything to SYNIC/STIMER
MSRs, including zeroes, however, at least QEMU tries clearing
HV_X64_MSR_STIMER0_CONFIG without SynIC. HV_X64_MSR_EOM MSR is somewhat
'special' as writing zero there triggers an action, this also should not
happen when SynIC wasn't activated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20220325132140.25650-4-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gwendal Grignou [Sat, 22 Jan 2022 00:13:01 +0000 (16:13 -0800)]
platform: chrome: Split trace include file
commit
eabd9a3807e17e211690e6c40f1405b427b64c48 upstream.
cros_ec_trace.h defined 5 tracing events, 2 for cros_ec_proto and
3 for cros_ec_sensorhub_ring.
These 2 files are in different kernel modules, the traces are defined
twice in the kernel which leads to problem enabling only some traces.
Move sensorhub traces from cros_ec_trace.h to cros_ec_sensorhub_trace.h
and enable them only in cros_ec_sensorhub kernel module.
Check we can now enable any single traces: without this patch,
we can only enable all sensorhub traces or none.
Fixes:
d453ceb6549a ("platform/chrome: sensorhub: Add trace events for sample")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220122001301.640337-1-gwendal@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manish Rangankar [Thu, 10 Mar 2022 09:26:02 +0000 (01:26 -0800)]
scsi: qla2xxx: Use correct feature type field during RFF_ID processing
commit
a7e05f7a1bcbe4ee055479242de46c5c16ab03b1 upstream.
During SNS Register FC-4 Features (RFF_ID) the initiator driver was sending
incorrect type field for NVMe supported device. Use correct feature type
field.
Link: https://lore.kernel.org/r/20220310092604.22950-12-njavali@marvell.com
Fixes:
e374f9f59281 ("scsi: qla2xxx: Migrate switch registration commands away from mailbox interface")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Thu, 10 Mar 2022 09:26:00 +0000 (01:26 -0800)]
scsi: qla2xxx: Reduce false trigger to login
commit
d2646eed7b19a206912f49101178cbbaa507256c upstream.
While a session is in the middle of a relogin, a late RSCN can be delivered
from switch. RSCN trigger fabric scan where the scan logic can trigger
another session login while a login is in progress. Reduce the extra
trigger to prevent multiple logins to the same session.
Link: https://lore.kernel.org/r/20220310092604.22950-10-njavali@marvell.com
Fixes:
bee8b84686c4 ("scsi: qla2xxx: Reduce redundant ADISC command for RSCNs")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Thu, 10 Mar 2022 09:25:57 +0000 (01:25 -0800)]
scsi: qla2xxx: Fix N2N inconsistent PLOGI
commit
c13ce47c64ea8f14e77eecb40d1e7c2ac667f898 upstream.
For N2N topology, ELS Passthrough is used to send PLOGI. On failure of ELS
pass through PLOGI, driver flipped over to using LLIOCB PLOGI for N2N. This
is not consistent. Delete the session to restart the connection where ELS
pass through PLOGI would be used consistently.
Link: https://lore.kernel.org/r/20220310092604.22950-7-njavali@marvell.com
Fixes:
c76ae845ea83 ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arun Easi [Thu, 10 Mar 2022 09:25:55 +0000 (01:25 -0800)]
scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests
commit
c85ab7d9e27a80e48d5b7d7fb2fe2b0fdb2de523 upstream.
At NVMe ELS request time, request structure is DMA mapped and never
unmapped. Fix this by calling the unmap on ELS completion.
Link: https://lore.kernel.org/r/20220310092604.22950-5-njavali@marvell.com
Fixes:
e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Thu, 10 Mar 2022 09:25:58 +0000 (01:25 -0800)]
scsi: qla2xxx: Fix hang due to session stuck
commit
c02aada06d19a215c8291bd968a99a270e96f734 upstream.
User experienced device lost. The log shows Get port data base command was
queued up, failed, and requeued again. Every time it is requeued, it set
the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring
because driver thinks a recovery is in progress for this session. In
essence, this session is hung. The reason it gets into this place is the
session deletion got in front of this call due to link perturbation.
Break the requeue cycle and exit. The session deletion code will trigger a
session relogin.
Link: https://lore.kernel.org/r/20220310092604.22950-8-njavali@marvell.com
Fixes:
726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Thu, 10 Mar 2022 09:25:52 +0000 (01:25 -0800)]
scsi: qla2xxx: Fix incorrect reporting of task management failure
commit
58ca5999e0367d131de82a75257fbfd5aed0195d upstream.
User experienced no task management error while target device is responding
with error. The RSP_CODE field in the status IOCB is in little endian.
Driver assumes it's big endian and it picked up erroneous data.
Convert the data back to big endian as is on the wire.
Link: https://lore.kernel.org/r/20220310092604.22950-2-njavali@marvell.com
Fixes:
faef62d13463 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Thu, 10 Mar 2022 09:25:53 +0000 (01:25 -0800)]
scsi: qla2xxx: Fix disk failure to rediscover
commit
6a45c8e137d4e2c72eecf1ac7cf64f2fdfcead99 upstream.
User experienced some of the LUN failed to get rediscovered after long
cable pull test. The issue is triggered by a race condition between driver
setting session online state vs starting the LUN scan process at the same
time. Current code set the online state after notifying the session is
available. In this case, trigger to start the LUN scan process happened
before driver could set the session in online state. LUN scan ends up with
failure due to the session online check was failing.
Set the online state before reporting of the availability of the session.
Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com
Fixes:
aecf043443d3 ("scsi: qla2xxx: Fix Remote port registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saurav Kashyap [Mon, 10 Jan 2022 05:02:15 +0000 (21:02 -0800)]
scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()
commit
a60447e7d451df42c7bde43af53b34f10f34f469 upstream.
[ 12.323788] BUG: using smp_processor_id() in preemptible [
00000000] code: systemd-udevd/1020
[ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1
[ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018
[ 12.356356] Call Trace:
[ 12.358821] dump_stack_lvl+0x34/0x44
[ 12.362514] check_preemption_disabled+0xd9/0xe0
[ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx]
[ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40
[ 12.384284] local_pci_probe+0x42/0x80
[ 12.390162] ? pci_match_device+0xd7/0x110
[ 12.396366] pci_device_probe+0xfd/0x1b0
[ 12.402372] really_probe+0x1e7/0x3e0
[ 12.408114] __driver_probe_device+0xfe/0x180
[ 12.414544] driver_probe_device+0x1e/0x90
[ 12.420685] __driver_attach+0xc0/0x1c0
[ 12.426536] ? __device_attach_driver+0xe0/0xe0
[ 12.433061] ? __device_attach_driver+0xe0/0xe0
[ 12.439538] bus_for_each_dev+0x78/0xc0
[ 12.445294] bus_add_driver+0x12b/0x1e0
[ 12.451021] driver_register+0x8f/0xe0
[ 12.456631] ? 0xffffffffc07bc000
[ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx]
[ 12.468776] do_one_initcall+0x44/0x200
[ 12.474401] ? load_module+0xad3/0xba0
[ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410
[ 12.486268] do_init_module+0x5c/0x280
[ 12.491730] __do_sys_init_module+0x12e/0x1b0
[ 12.497785] do_syscall_64+0x3b/0x90
[ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 12.509764] RIP: 0033:0x7f554f73ab2e
Link: https://lore.kernel.org/r/20220110050218.3958-15-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Carnuccio [Mon, 10 Jan 2022 05:02:17 +0000 (21:02 -0800)]
scsi: qla2xxx: Check for firmware dump already collected
commit
cfbafad7c6032d449a5a07f2d273acd2437bbc6a upstream.
While allocating firmware dump, check if dump is already collected and do
not re-allocate the buffer.
Link: https://lore.kernel.org/r/20220110050218.3958-17-njavali@marvell.com
Cc: stable@vger.kernel.org
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Carnuccio [Mon, 10 Jan 2022 05:02:16 +0000 (21:02 -0800)]
scsi: qla2xxx: Add devids and conditionals for 28xx
commit
0d6a536cb1fcabb6c3e9c94871c8d0b29bb5813b upstream.
This is an update to the original 28xx adapter enablement. Add a bunch of
conditionals that are applicable for 28xx.
Link: https://lore.kernel.org/r/20220110050218.3958-16-njavali@marvell.com
Fixes:
ecc89f25e225 ("scsi: qla2xxx: Add Device ID for ISP28XX")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arun Easi [Mon, 10 Jan 2022 05:02:11 +0000 (21:02 -0800)]
scsi: qla2xxx: Fix device reconnect in loop topology
commit
8ad4be3d15cf144b5834bdb00d5bbe4050938dc7 upstream.
A device logout in loop topology initiates a device connection teardown
which loses the FW device handle. In loop topo, the device handle is not
regrabbed leading to device login failures and eventually to loss of the
device. Fix this by taking the main login path that does it.
Link: https://lore.kernel.org/r/20220110050218.3958-11-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nilesh Javali [Mon, 10 Jan 2022 05:02:12 +0000 (21:02 -0800)]
scsi: qla2xxx: Fix warning for missing error code
commit
14cb838d245ae0d523b2f7804af5a02c22e79f5a upstream.
Fix smatch-reported warning message:
drivers/scsi/qla2xxx/qla_target.c:3324 qlt_xmit_response() warn: missing error
code 'res'
Link: https://lore.kernel.org/r/20220110050218.3958-12-njavali@marvell.com
Fixes:
4a8f71014b4d ("scsi: qla2xxx: Fix unmap of already freed sgl")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bikash Hazarika [Mon, 10 Jan 2022 05:02:09 +0000 (21:02 -0800)]
scsi: qla2xxx: Fix wrong FDMI data for 64G adapter
commit
1cfbbacbee2d6ea3816386a483e3c7a96e5bd657 upstream.
Corrected transmission speed mask values for FC.
Supported Speed: 16 32 20 Gb/s ===> Should be 64 instead of 20
Supported Speed: 16G 32G 48G ===> Should be 64G instead of 48G
Link: https://lore.kernel.org/r/20220110050218.3958-9-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Mon, 10 Jan 2022 05:02:07 +0000 (21:02 -0800)]
scsi: qla2xxx: Fix scheduling while atomic
commit
afd438ff874ca40b74321b3fa19bd61adfd7ca0c upstream.
The driver makes a call into midlayer (fc_remote_port_delete) which can put
the thread to sleep. The thread that originates the call is in interrupt
context. The combination of the two trigger a crash. Schedule the call in
non-interrupt context where it is more safe.
kernel: BUG: scheduling while atomic: swapper/7/0/0x00010000
kernel: Call Trace:
kernel: <IRQ>
kernel: dump_stack+0x66/0x81
kernel: __schedule_bug.cold.90+0x5/0x1d
kernel: __schedule+0x7af/0x960
kernel: schedule+0x28/0x80
kernel: schedule_timeout+0x26d/0x3b0
kernel: wait_for_completion+0xb4/0x140
kernel: ? wake_up_q+0x70/0x70
kernel: __wait_rcu_gp+0x12c/0x160
kernel: ? sdev_evt_alloc+0xc0/0x180 [scsi_mod]
kernel: synchronize_sched+0x6c/0x80
kernel: ? call_rcu_bh+0x20/0x20
kernel: ? __bpf_trace_rcu_invoke_callback+0x10/0x10
kernel: sdev_evt_alloc+0xfd/0x180 [scsi_mod]
kernel: starget_for_each_device+0x85/0xb0 [scsi_mod]
kernel: ? scsi_init_io+0x360/0x3d0 [scsi_mod]
kernel: scsi_init_io+0x388/0x3d0 [scsi_mod]
kernel: device_for_each_child+0x54/0x90
kernel: fc_remote_port_delete+0x70/0xe0 [scsi_transport_fc]
kernel: qla2x00_schedule_rport_del+0x62/0xf0 [qla2xxx]
kernel: qla2x00_mark_device_lost+0x9c/0xd0 [qla2xxx]
kernel: qla24xx_handle_plogi_done_event+0x55f/0x570 [qla2xxx]
kernel: qla2x00_async_login_sp_done+0xd2/0x100 [qla2xxx]
kernel: qla24xx_logio_entry+0x13a/0x3c0 [qla2xxx]
kernel: qla24xx_process_response_queue+0x306/0x400 [qla2xxx]
kernel: qla24xx_msix_rsp_q+0x3f/0xb0 [qla2xxx]
kernel: __handle_irq_event_percpu+0x40/0x180
kernel: handle_irq_event_percpu+0x30/0x80
kernel: handle_irq_event+0x36/0x60
Link: https://lore.kernel.org/r/20220110050218.3958-7-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Mon, 10 Jan 2022 05:02:04 +0000 (21:02 -0800)]
scsi: qla2xxx: Fix stuck session in gpdb
commit
725d3a0d31a51c0debf970011e05f585e805165b upstream.
Fix stuck sessions in get port database. When a thread is in the process of
re-establishing a session, a flag is set to prevent multiple threads /
triggers from doing the same task. This flag was left on, where any attempt
to relogin was locked out. Clear this flag, if the attempt has failed.
Link: https://lore.kernel.org/r/20220110050218.3958-4-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anders Roxell [Thu, 24 Feb 2022 16:22:14 +0000 (17:22 +0100)]
powerpc: Fix build errors with newer binutils
commit
8667d0d64dd1f84fd41b5897fd87fa9113ae05e3 upstream.
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.
20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:1190: Error: unrecognized opcode: `stbcix'
{standard input}:1433: Error: unrecognized opcode: `lwzcix'
{standard input}:1453: Error: unrecognized opcode: `stbcix'
{standard input}:1460: Error: unrecognized opcode: `stwcix'
{standard input}:1596: Error: unrecognized opcode: `stbcix'
...
Rework to add assembler directives [1] around the instruction. Going
through them one by one shows that the changes should be safe. Like
__get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(),
which according to the name is specific to power9. And __raw_rm_read*()
are only called in things that are powernv or book3s_hv specific.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Cc: stable@vger.kernel.org
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Make commit subject more descriptive]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-2-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anders Roxell [Thu, 24 Feb 2022 16:22:15 +0000 (17:22 +0100)]
powerpc/lib/sstep: Fix build errors with newer binutils
commit
8219d31effa7be5dbc7ff915d7970672e028c701 upstream.
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.
20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:10576: Error: unrecognized opcode: `stbcx.'
{standard input}:10680: Error: unrecognized opcode: `lharx'
{standard input}:10694: Error: unrecognized opcode: `lbarx'
Rework to add assembler directives [1] around the instruction. The
problem with this might be that we can trick a power6 into
single-stepping through an stbcx. for instance, and it will execute that
in kernel mode.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Fixes:
350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: stable@vger.kernel.org # v4.14+
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-3-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anders Roxell [Thu, 24 Feb 2022 16:22:13 +0000 (17:22 +0100)]
powerpc/lib/sstep: Fix 'sthcx' instruction
commit
a633cb1edddaa643fadc70abc88f89a408fa834a upstream.
Looks like there been a copy paste mistake when added the instruction
'stbcx' twice and one was probably meant to be 'sthcx'. Changing to
'sthcx' from 'stbcx'.
Fixes:
350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-1-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen Jingwen [Wed, 29 Dec 2021 03:52:26 +0000 (11:52 +0800)]
powerpc/kasan: Fix early region not updated correctly
commit
dd75080aa8409ce10d50fb58981c6b59bf8707d3 upstream.
The shadow's page table is not updated when PTE_RPN_SHIFT is 24
and PAGE_SHIFT is 12. It not only causes false positives but
also false negative as shown the following text.
Fix it by bringing the logic of kasan_early_shadow_page_entry here.
1. False Positive:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50
Write of size 16 at addr
f57f3be0 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.15.0-12267-gdebe436e77c7 #1
Call Trace:
[
c80d1c20] [
c07fe7b8] dump_stack_lvl+0x4c/0x6c (unreliable)
[
c80d1c40] [
c02ff668] print_address_description.constprop.0+0x88/0x300
[
c80d1c70] [
c02ff45c] kasan_report+0x1ec/0x200
[
c80d1cb0] [
c0300b20] kasan_check_range+0x160/0x2f0
[
c80d1cc0] [
c03018a4] memset+0x34/0x90
[
c80d1ce0] [
c0280108] pcpu_alloc+0x508/0xa50
[
c80d1d40] [
c02fd7bc] __kmem_cache_create+0xfc/0x570
[
c80d1d70] [
c0283d64] kmem_cache_create_usercopy+0x274/0x3e0
[
c80d1db0] [
c2036580] init_sd+0xc4/0x1d0
[
c80d1de0] [
c00044a0] do_one_initcall+0xc0/0x33c
[
c80d1eb0] [
c2001624] kernel_init_freeable+0x2c8/0x384
[
c80d1ef0] [
c0004b14] kernel_init+0x24/0x170
[
c80d1f10] [
c001b26c] ret_from_kernel_thread+0x5c/0x64
Memory state around the buggy address:
f57f3a80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3b00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>
f57f3b80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f57f3c00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3c80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
2. False Negative (with KASAN tests):
==================================================================
Before fix:
ok 45 - kmalloc_double_kzfree
# vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039
KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
not ok 46 - vmalloc_oob
not ok 1 - kasan
==================================================================
After fix:
ok 1 - kasan
Fixes:
cbd18991e24fe ("powerpc/mm: Fix an Oops in kasan_mmu_init()")
Cc: stable@vger.kernel.org # 5.4.x
Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211229035226.59159-1-chenjingwen6@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Sat, 26 Feb 2022 00:15:20 +0000 (00:15 +0000)]
KVM: x86/mmu: Check for present SPTE when clearing dirty bit in TDP MMU
commit
3354ef5a592d219364cf442c2f784ce7ad7629fd upstream.
Explicitly check for present SPTEs when clearing dirty bits in the TDP
MMU. This isn't strictly required for correctness, as setting the dirty
bit in a defunct SPTE will not change the SPTE from !PRESENT to PRESENT.
However, the guarded MMU_WARN_ON() in spte_ad_need_write_protect() would
complain if anyone actually turned on KVM's MMU debugging.
Fixes:
a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU")
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <
20220226001546.360188-3-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Kramer [Tue, 22 Mar 2022 20:48:17 +0000 (13:48 -0700)]
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
[ Upstream commit
ef248d9bd616b04df8be25539a4dc5db4b6c56f4 ]
This fixes the near-silence of the headphone jack on the ALC256-based
Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found
through trial and error, using known ALC298 hacks as inspiration. The
fixup is auto-enabled only when the NP730QCJ is detected. It can be
manually enabled using model=alc256-samsung-headphone.
Signed-off-by: Matt Kramer <mccleetus@gmail.com>
Link: https://lore.kernel.org/r/3168355.aeNJFYEL58@linus
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mauro Carvalho Chehab [Mon, 14 Mar 2022 17:11:38 +0000 (18:11 +0100)]
media: atomisp: fix bad usage at error handling logic
[ Upstream commit
fc0b582c858ed73f94c8f3375c203ea46f1f7402 ]
As warned by sparse:
atomisp: drivers/staging/media/atomisp/pci/atomisp_acc.c:508 atomisp_acc_load_extensions() warn: iterator used outside loop: 'acc_fw'
The acc_fw interactor is used outside the loop, at the error handling
logic. On most cases, this is actually safe there, but, if
atomisp_css_set_acc_parameters() has an error, an attempt to use it
will pick an invalid value for acc_fw.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ulf Hansson [Thu, 3 Mar 2022 16:51:42 +0000 (17:51 +0100)]
mmc: host: Return an error when ->enable_sdio_irq() ops is missing
[ Upstream commit
d6c9219ca1139b74541b2a98cee47a3426d754a9 ]
Even if the current WARN() notifies the user that something is severely
wrong, we can still end up in a PANIC() when trying to invoke the missing
->enable_sdio_irq() ops. Therefore, let's also return an error code and
prevent the host from being added.
While at it, move the code into a separate function to prepare for
subsequent changes and for further host caps validations.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220303165142.129745-1-ulf.hansson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dongliang Mu [Fri, 18 Feb 2022 09:41:30 +0000 (10:41 +0100)]
media: hdpvr: initialize dev->worker at hdpvr_register_videodev
[ Upstream commit
07922937e9a580825f9965c46fd15e23ba5754b6 ]
hdpvr_register_videodev is responsible to initialize a worker in
hdpvr_device. However, the worker is only initialized at
hdpvr_start_streaming other than hdpvr_register_videodev.
When hdpvr_probe does not initialize its worker, the hdpvr_disconnect
will encounter one WARN in flush_work.The stack trace is as follows:
hdpvr_disconnect+0xb8/0xf2 drivers/media/usb/hdpvr/hdpvr-core.c:425
usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458
__device_release_driver drivers/base/dd.c:1206 [inline]
device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1237
bus_remove_device+0x108/0x160 drivers/base/bus.c:529
device_del+0x1fe/0x510 drivers/base/core.c:3592
usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419
usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2228
Fix this by moving the initialization of dev->worker to the starting of
hdpvr_register_videodev
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Skripkin [Thu, 20 Jan 2022 19:37:30 +0000 (20:37 +0100)]
media: Revert "media: em28xx: add missing em28xx_close_extension"
[ Upstream commit
fde18c3bac3f964d8333ae53b304d8fee430502b ]
This reverts commit
2c98b8a3458df03abdc6945bbef67ef91d181938.
Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian
reported [1]. Since quick solution didn't come up let's just revert it
to make this device work with upstream kernels.
Link: https://lore.kernel.org/all/6a72a37b-e972-187d-0322-16336e12bdc5@elbmurf.de/
Reported-by: Maximilian Böhm <maximilian.boehm@elbmurf.de>
Tested-by: Maximilian Böhm <maximilian.boehm@elbmurf.de>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheyu Ma [Wed, 2 Mar 2022 14:33:11 +0000 (22:33 +0800)]
video: fbdev: sm712fb: Fix crash in smtcfb_write()
[ Upstream commit
4f01d09b2bbfbcb47b3eb305560a7f4857a32260 ]
When the sm712fb driver writes three bytes to the framebuffer, the
driver will crash:
BUG: unable to handle page fault for address:
ffffc90001ffffff
RIP: 0010:smtcfb_write+0x454/0x5b0
Call Trace:
vfs_write+0x291/0xd60
? do_sys_openat2+0x27d/0x350
? __fget_light+0x54/0x340
ksys_write+0xce/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix it by removing the open-coded endianness fixup-code.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Mon, 26 Jul 2021 20:01:58 +0000 (22:01 +0200)]
ARM: mmp: Fix failure to remove sram device
[ Upstream commit
4036b29a146b2749af3bb213b003eb69f3e5ecc4 ]
Make sure in .probe() to set driver data before the function is left to
make it possible in .remove() to undo the actions done.
This fixes a potential memory leak and stops returning an error code in
.remove() that is ignored by the driver core anyhow.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Leitner [Wed, 1 Dec 2021 16:11:48 +0000 (17:11 +0100)]
ARM: tegra: tamonten: Fix I2C3 pad setting
[ Upstream commit
0092c25b541a5422d7e71892a13c55ee91abc34b ]
This patch fixes the tristate configuration for i2c3 function assigned
to the dtf pins on the Tamonten Tegra20 SoM.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Wed, 16 Feb 2022 12:48:06 +0000 (13:48 +0100)]
lib/test_lockup: fix kernel pointer check for separate address spaces
[ Upstream commit
5a06fcb15b43d1f7bf740c672950122331cb5655 ]
test_kernel_ptr() uses access_ok() to figure out if a given address
points to user space instead of kernel space. However on architectures
that set CONFIG_ALTERNATE_USER_ADDRESS_SPACE, a pointer can be valid
for both, and the check always fails because access_ok() returns true.
Make the check for user space pointers conditional on the type of
address space layout.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 14 Feb 2022 19:22:10 +0000 (20:22 +0100)]
uaccess: fix type mismatch warnings from access_ok()
[ Upstream commit
23fc539e81295b14b50c6ccc5baeb4f3d59d822d ]
On some architectures, access_ok() does not do any argument type
checking, so replacing the definition with a generic one causes
a few warnings for harmless issues that were never caught before.
Fix the ones that I found either through my own test builds or
that were reported by the 0-day bot.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel González Cabanelas [Sun, 20 Feb 2022 18:19:50 +0000 (19:19 +0100)]
media: cx88-mpeg: clear interrupt status register before streaming video
[ Upstream commit
56cb61f70e547e1b0cdfe6ff5a1f1ce6242e6d96 ]
Some cx88 video cards may have transport stream status interrupts set
to 1 from cold start, causing errors like this:
cx88xx: cx88_print_irqbits: core:irq mpeg [0x100000] ts_err?*
cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000
According to CX2388x datasheet, the interrupt status register should be
cleared before enabling IRQs to stream video.
Fix it by clearing the Transport Stream Interrupt Status register.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shengjiu Wang [Thu, 10 Feb 2022 11:19:12 +0000 (19:19 +0800)]
ASoC: soc-core: skip zero num_dai component in searching dai name
[ Upstream commit
f7d344a2bd5ec81fbd1ce76928fd059e57ec9bea ]
In the case like dmaengine which's not a dai but as a component, the
num_dai is zero, dmaengine component has the same component_of_node
as cpu dai, when cpu dai component is not ready, but dmaengine component
is ready, try to get cpu dai name, the snd_soc_get_dai_name() return
-EINVAL, not -EPROBE_DEFER, that cause below error:
asoc-simple-card <card name>: parse error -22
asoc-simple-card: probe of <card name> failed with error -22
The sound card failed to probe.
So this patch fixes the issue above by skipping the zero num_dai
component in searching dai name.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1644491952-7457-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Schleich [Tue, 21 Dec 2021 22:48:30 +0000 (23:48 +0100)]
ARM: dts: bcm2711: Add the missing L1/L2 cache information
[ Upstream commit
618682b350990f8f1bee718949c4b3858711eb58 ]
This patch fixes the kernel warning
"cacheinfo: Unable to detect cache hierarchy for CPU 0"
for the bcm2711 on newer kernel versions.
Signed-off-by: Richard Schleich <rs@noreya.tech>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
[florian: Align and remove comments matching property values]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jing Yao [Thu, 4 Nov 2021 11:52:29 +0000 (11:52 +0000)]
video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit
[ Upstream commit
81a998288956d09d7a7a2303d47e4d60ad55c401 ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jing Yao [Fri, 5 Nov 2021 08:20:44 +0000 (08:20 +0000)]
video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
[ Upstream commit
c07a039cbb96748f54c02995bae8131cc9a73b0a ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jing Yao [Fri, 5 Nov 2021 08:13:33 +0000 (08:13 +0000)]
video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
[ Upstream commit
f63658a59c3d439c8ad7b290f8ec270980e0f384 ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marcel Ziswiler [Fri, 28 Jan 2022 16:00:56 +0000 (17:00 +0100)]
arm64: defconfig: build imx-sdma as a module
[ Upstream commit
e95622289f263662240544a9f0009b25c19e64d4 ]
This avoids firmware load error and sysfs fallback reported as follows:
[ 0.199448] imx-sdma
302c0000.dma-controller: Direct firmware load
for imx/sdma/sdma-imx7d.bin failed with error -2
[ 0.199487] imx-sdma
302c0000.dma-controller: Falling back to sysfs
fallback for: imx/sdma/sdma-imx7d.bin
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Abel Vesa [Thu, 27 Jan 2022 14:10:51 +0000 (16:10 +0200)]
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
[ Upstream commit
4cb7df64c732b2b9918424095c11660c2a8c4a33 ]
The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. Moreover,
the consumer driver of the mentioned clock might gate it and leave
the ECSPI2 (the true owner of that gate) hanging. So lets use the
audio_mclk_post_div, which is the parent.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Sun, 23 Jan 2022 19:18:33 +0000 (20:18 +0100)]
ARM: ftrace: avoid redundant loads or clobbering IP
[ Upstream commit
d11967870815b5ab89843980e35aab616c97c463 ]
Tweak the ftrace return paths to avoid redundant loads of SP, as well as
unnecessary clobbering of IP.
This also fixes the inconsistency of using MOV to perform a function
return, which is sub-optimal on recent micro-architectures but more
importantly, does not perform an interworking return, unlike compiler
generated function returns in Thumb2 builds.
Let's fix this by popping PC from the stack like most ordinary code
does.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tsuchiya Yuto [Sun, 17 Oct 2021 16:23:33 +0000 (18:23 +0200)]
media: atomisp: fix dummy_ptr check to avoid duplicate active_bo
[ Upstream commit
127efdbc51fe6064336c0452ce9c910b3e107cf0 ]
The dummy_ptr check in hmm_init() [1] results in the following
"hmm_init Failed to create sysfs" error exactly once every
two times on atomisp reload by rmmod/insmod (although atomisp module
loads and works fine regardless of this error):
[ 140.230662] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/active_bo'
[ 140.230668] CPU: 1 PID: 2502 Comm: insmod Tainted: G C OE 5.15.0-rc4-1-surface-mainline #1
b8acf6eb64994414b2e20bad312a7a2c45f748f9
[ 140.230675] Hardware name: OEMB OEMB/OEMB, BIOS 1.51116.238 03/09/2015
[ 140.230678] Call Trace:
[ 140.230687] dump_stack_lvl+0x46/0x5a
[ 140.230702] sysfs_warn_dup.cold+0x17/0x24
[ 140.230710] sysfs_add_file_mode_ns+0x160/0x170
[ 140.230717] internal_create_group+0x126/0x390
[ 140.230723] hmm_init+0x5c/0x70 [atomisp
7a6a680bf400629363d2a6f58fd10e7299678b99]
[ 140.230811] atomisp_pci_probe.cold+0x1136/0x148e [atomisp
7a6a680bf400629363d2a6f58fd10e7299678b99]
[ 140.230875] local_pci_probe+0x45/0x80
[ 140.230882] ? pci_match_device+0xd7/0x130
[ 140.230887] pci_device_probe+0xfa/0x1b0
[ 140.230892] really_probe+0x1f5/0x3f0
[ 140.230899] __driver_probe_device+0xfe/0x180
[ 140.230903] driver_probe_device+0x1e/0x90
[ 140.230908] __driver_attach+0xc0/0x1c0
[ 140.230912] ? __device_attach_driver+0xe0/0xe0
[ 140.230915] ? __device_attach_driver+0xe0/0xe0
[ 140.230919] bus_for_each_dev+0x89/0xd0
[ 140.230924] bus_add_driver+0x12b/0x1e0
[ 140.230929] driver_register+0x8f/0xe0
[ 140.230933] ? 0xffffffffc153f000
[ 140.230937] do_one_initcall+0x57/0x220
[ 140.230945] do_init_module+0x5c/0x260
[ 140.230952] load_module+0x24bd/0x26a0
[ 140.230962] ? __do_sys_finit_module+0xae/0x110
[ 140.230966] __do_sys_finit_module+0xae/0x110
[ 140.230972] do_syscall_64+0x5c/0x80
[ 140.230979] ? syscall_exit_to_user_mode+0x23/0x40
[ 140.230983] ? do_syscall_64+0x69/0x80
[ 140.230988] ? exc_page_fault+0x72/0x170
[ 140.230991] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 140.230997] RIP: 0033:0x7f7fd5d8718d
[ 140.231003] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48
[ 140.231006] RSP: 002b:
00007ffefc25f0e8 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 140.231012] RAX:
ffffffffffffffda RBX:
000055ac3edcd7f0 RCX:
00007f7fd5d8718d
[ 140.231015] RDX:
0000000000000000 RSI:
000055ac3d723270 RDI:
0000000000000003
[ 140.231017] RBP:
0000000000000000 R08:
0000000000000000 R09:
00007f7fd5e52380
[ 140.231019] R10:
0000000000000003 R11:
0000000000000246 R12:
000055ac3d723270
[ 140.231021] R13:
0000000000000000 R14:
000055ac3edd06e0 R15:
0000000000000000
[ 140.231038] atomisp-isp2 0000:00:03.0: hmm_init Failed to create sysfs
The problem is that dummy_ptr == 0 is a valid value. So, change the logic
which checks if dummy_ptr was allocated.
At this point, atomisp now gives WARN_ON() in hmm_free() [2] on atomisp
reload by rmmod/insmod. Again, the check is wrong there.
So, change both checks for mmgr_EXCEPTION, which is the error value when
HMM allocation fails, and initialize dummy_ptr with such value.
[1] added on commit
d9ab83953fa7 ("media: atomisp: don't cause a warn if probe failed")
[2] added on commit
b83cc378dfc4 ("atomisp: clean up the hmm init/cleanup indirections")
Link: https://lore.kernel.org/linux-media/20211017162337.44860-3-kitakar@gmail.com
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:52:04 +0000 (22:52 +0100)]
media: atomisp_gmin_platform: Add DMI quirk to not turn AXP ELDO2 regulator off on some boards
[ Upstream commit
2c39a01154ea57d596470afa1d278e3be3b37f6a ]
The TrekStor SurfTab duo W1 10.1 has a hw bug where turning eldo2 back on
after having turned it off causes the CPLM3218 ambient-light-sensor on
the front camera sensor's I2C bus to crash, hanging the bus.
Add a DMI quirk table for systems on which to leave eldo2 on.
Note an alternative fix is to turn off the CPLM3218 ambient-light-sensor
as long as the camera sensor is being used, this is what Windows seems
to do as a workaround (based on analyzing the DSDT). But that is not
easy to do cleanly under Linux.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-10-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charles Keepax [Thu, 3 Feb 2022 11:50:25 +0000 (11:50 +0000)]
ASoC: madera: Add dependencies on MFD
[ Upstream commit
ec29170c724ca30305fc3a19ba2ee73ecac65509 ]
The Madera CODECs use regmap_irq functions but nothing ensures that
regmap_irq is built into the kernel. Add dependencies on the ASoC
symbols for the relevant MFD component. There is no point in building
the ASoC driver if the MFD doesn't support it and the MFD part contains
the necessary dependencies to ensure everything is built into the
kernel.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220203115025.16464-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Schleich [Sat, 18 Dec 2021 20:00:09 +0000 (21:00 +0100)]
ARM: dts: bcm2837: Add the missing L1/L2 cache information
[ Upstream commit
bdf8762da268d2a34abf517c36528413906e9cd5 ]
This patch fixes the kernel warning
"cacheinfo: Unable to detect cache hierarchy for CPU 0"
for the bcm2837 on newer kernel versions.
Signed-off-by: Richard Schleich <rs@noreya.tech>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
[florian: Align and remove comments matching property values]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Heidelberg [Sat, 8 Jan 2022 17:42:28 +0000 (18:42 +0100)]
ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
[ Upstream commit
6f7e221e7a5cfc3299616543fce42b36e631497b ]
IRQ types blindly copied from very similar APQ8064.
Fixes warnings as:
WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic.c:1080 gic_irq_domain_translate+0x118/0x120
...
Tested-by: LogicalErzor <logicalerzor@gmail.com> # boot-tested on Samsung S3
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220108174229.60384-1-david@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Guang [Tue, 30 Nov 2021 00:06:03 +0000 (08:06 +0800)]
video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit
[ Upstream commit
24565bc4115961db7ee64fcc7ad2a7437c0d0a49 ]
coccinelle report:
./drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c:
479:9-17: WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
George Kennedy [Wed, 27 Oct 2021 20:30:13 +0000 (15:30 -0500)]
video: fbdev: cirrusfb: check pixclock to avoid divide by zero
[ Upstream commit
5c6f402bdcf9e7239c6bc7087eda71ac99b31379 ]
Do a sanity check on pixclock value to avoid divide by zero.
If the pixclock value is zero, the cirrusfb driver will round up
pixclock to get the derived frequency as close to maxclock as
possible.
Syzkaller reported a divide error in cirrusfb_check_pixclock.
divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2
RIP: 0010:cirrusfb_check_var+0x6f1/0x1260
Call Trace:
fb_set_var+0x398/0xf90
do_fb_ioctl+0x4b8/0x6f0
fb_ioctl+0xeb/0x130
__x64_sys_ioctl+0x19d/0x220
do_syscall_64+0x3a/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Evgeny Novikov [Wed, 11 Aug 2021 16:58:26 +0000 (19:58 +0300)]
video: fbdev: w100fb: Reset global state
[ Upstream commit
8738ddcac644964ae128ccd3d80d48773c8d528e ]
w100fb_probe() did not reset the global state to its initial state. This
can result in invocation of iounmap() even when there was not the
appropriate successful call of ioremap(). For instance, this may be the
case if first probe fails after two successful ioremap() while second
probe fails when first ioremap() fails. The similar issue is with
w100fb_remove(). The patch fixes both bugs.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tim Gardner [Mon, 27 Sep 2021 15:45:02 +0000 (09:45 -0600)]
video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow
[ Upstream commit
37a1a2e6eeeb101285cd34e12e48a881524701aa ]
Coverity complains of a possible buffer overflow. However,
given the 'static' scope of nvidia_setup_i2c_bus() it looks
like that can't happen after examiniing the call sites.
CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
1. fixed_size_dest: You might overrun the 48-character fixed-size string
chan->adapter.name by copying name without checking the length.
2. parameter_as_source: Note: This defect has an elevated risk because the
source argument is a parameter of the current function.
89 strcpy(chan->adapter.name, name);
Fix this warning by using strscpy() which will silence the warning and
prevent any future buffer overflows should the names used to identify the
channel become much longer.
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peiwei Hu [Wed, 29 Dec 2021 01:15:18 +0000 (02:15 +0100)]
media: ir_toy: free before error exiting
[ Upstream commit
52cdb013036391d9d87aba5b4fc49cdfc6ea4b23 ]
Fix leak in error path.
Signed-off-by: Peiwei Hu <jlu.hpw@foxmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans Verkuil [Tue, 14 Dec 2021 16:16:33 +0000 (17:16 +0100)]
media: staging: media: zoran: fix various V4L2 compliance errors
[ Upstream commit
914941827aad5ecddf9bf3a6dee67fbec1af1fff ]
This fixes several issues found with 'v4l2-compliance -s':
1) read()/write() is supported, but not reported in the capabilities
2) S_STD(G_STD()) failed: setting the same standard should just return 0.
3) G_PARM failed to set readbuffers.
4) different field values in the format vs. what v4l2_buffer reported.
5) zero the sequence number when starting streaming.
6) drop VB_USERPTR: makes no sense with dma_contig streaming.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Tue, 14 Dec 2021 16:16:32 +0000 (17:16 +0100)]
media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com
[ Upstream commit
e3b86f4e558cea9eed71d894df2f19b10d60a207 ]
On the case tmp_dcim=1, the index of buffer is miscalculated.
This generate a NULL pointer dereference later.
So let's fix the calcul and add a check to prevent this to reappear.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Tue, 14 Dec 2021 16:16:26 +0000 (17:16 +0100)]
media: staging: media: zoran: move videodev alloc
[ Upstream commit
82e3a496eb56da0b9f29fdc5b63cedb3289e91de ]
Move some code out of zr36057_init() and create new functions for handling
zr->video_dev. This permit to ease code reading and fix a zr->video_dev
memory leak.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dongliang Mu [Tue, 22 Mar 2022 21:38:39 +0000 (14:38 -0700)]
ntfs: add sanity check on allocation size
[ Upstream commit
714fbf2647b1a33d914edd695d4da92029c7e7c0 ]
ntfs_read_inode_mount invokes ntfs_malloc_nofs with zero allocation
size. It triggers one BUG in the __ntfs_malloc function.
Fix this by adding sanity check on ni->attr_list_size.
Link: https://lkml.kernel.org/r/20220120094914.47736-1-dzm91@hust.edu.cn
Reported-by: syzbot+3c765c5248797356edaa@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Wed, 16 Mar 2022 10:20:00 +0000 (18:20 +0800)]
f2fs: compress: fix to print raw data size in error path of lz4 decompression
[ Upstream commit
d284af43f703760e261b1601378a0c13a19d5f1f ]
In lz4_decompress_pages(), if size of decompressed data is not equal to
expected one, we should print the size rather than size of target buffer
for decompressed data, fix it.
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuck Lever [Mon, 14 Feb 2022 20:30:13 +0000 (15:30 -0500)]
NFSD: Fix nfsd_breaker_owns_lease() return values
[ Upstream commit
50719bf3442dd6cd05159e9c98d020b3919ce978 ]
These have been incorrect since the function was introduced.
A proper kerneldoc comment is added since this function, though
static, is part of an external interface.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Fri, 4 Mar 2022 01:49:13 +0000 (09:49 +0800)]
f2fs: fix to do sanity check on curseg->alloc_type
[ Upstream commit
f41ee8b91c00770d718be2ff4852a80017ae9ab3 ]
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215657
- Overview
UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 when mount and operate a corrupted image
- Reproduce
tested on kernel 5.17-rc4, 5.17-rc6
1. mkdir test_crash
2. cd test_crash
3. unzip tmp2.zip
4. mkdir mnt
5. ./single_test.sh f2fs 2
- Kernel dump
[ 46.434454] loop0: detected capacity change from 0 to 131072
[ 46.529839] F2FS-fs (loop0): Mounted with checkpoint version =
7548c2d9
[ 46.738319] ================================================================================
[ 46.738412] UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2
[ 46.738475] index 231 is out of range for type 'unsigned int [2]'
[ 46.738539] CPU: 2 PID: 939 Comm: umount Not tainted 5.17.0-rc6 #1
[ 46.738547] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 46.738551] Call Trace:
[ 46.738556] <TASK>
[ 46.738563] dump_stack_lvl+0x47/0x5c
[ 46.738581] ubsan_epilogue+0x5/0x50
[ 46.738592] __ubsan_handle_out_of_bounds+0x68/0x80
[ 46.738604] f2fs_allocate_data_block+0xdff/0xe60 [f2fs]
[ 46.738819] do_write_page+0xef/0x210 [f2fs]
[ 46.738934] f2fs_do_write_node_page+0x3f/0x80 [f2fs]
[ 46.739038] __write_node_page+0x2b7/0x920 [f2fs]
[ 46.739162] f2fs_sync_node_pages+0x943/0xb00 [f2fs]
[ 46.739293] f2fs_write_checkpoint+0x7bb/0x1030 [f2fs]
[ 46.739405] kill_f2fs_super+0x125/0x150 [f2fs]
[ 46.739507] deactivate_locked_super+0x60/0xc0
[ 46.739517] deactivate_super+0x70/0xb0
[ 46.739524] cleanup_mnt+0x11a/0x200
[ 46.739532] __cleanup_mnt+0x16/0x20
[ 46.739538] task_work_run+0x67/0xa0
[ 46.739547] exit_to_user_mode_prepare+0x18c/0x1a0
[ 46.739559] syscall_exit_to_user_mode+0x26/0x40
[ 46.739568] do_syscall_64+0x46/0xb0
[ 46.739584] entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is we missed to do sanity check on curseg->alloc_type,
result in out-of-bound accessing on sbi->block_count[] array, fix it.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Theodore Ts'o [Thu, 3 Mar 2022 14:38:47 +0000 (09:38 -0500)]
ext4: don't BUG if someone dirty pages without asking ext4 first
[ Upstream commit
cc5095747edfb054ca2068d01af20be3fcc3634f ]
[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance. A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].
This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).
So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed. More discussion and background can be found in the
thread starting at [2].
[1] https://lore.kernel.org/linux-mm/
20180103100430.GE4911@quack2.suse.cz
[2] https://lore.kernel.org/r/Yg0m6IjcNmfaSokM@google.com
Reported-by: syzbot+d59332e2db681cf18f0318a06e994ebbb529a8db@syzkaller.appspotmail.com
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/YiDS9wVfq4mM2jGK@mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ritesh Harjani [Wed, 16 Feb 2022 07:02:44 +0000 (12:32 +0530)]
ext4: fix ext4_mb_mark_bb() with flex_bg with fast_commit
[ Upstream commit
bfdc502a4a4c058bf4cbb1df0c297761d528f54d ]
In case of flex_bg feature (which is by default enabled), extents for
any given inode might span across blocks from two different block group.
ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the
starting block group, but it fails to read it again when the extent length
boundary overflows to another block group. Then in this below loop it
accesses memory beyond the block group bitmap buffer_head and results
into a data abort.
for (i = 0; i < clen; i++)
if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
already++;
This patch adds this functionality for checking block group boundary in
ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different
block group.
w/o this patch, I was easily able to hit a data access abort using Power platform.
<...>
[ 74.327662] EXT4-fs error (device loop3): ext4_mb_generate_buddy:1141: group 11, block bitmap and bg descriptor inconsistent: 21248 vs 23294 free clusters
[ 74.533214] EXT4-fs (loop3): shut down requested (2)
[ 74.536705] Aborting journal on device loop3-8.
[ 74.702705] BUG: Unable to handle kernel data access on read at 0xc00000005e980000
[ 74.703727] Faulting instruction address: 0xc0000000007bffb8
cpu 0xd: Vector: 300 (Data Access) at [
c000000015db7060]
pc:
c0000000007bffb8: ext4_mb_mark_bb+0x198/0x5a0
lr:
c0000000007bfeec: ext4_mb_mark_bb+0xcc/0x5a0
sp:
c000000015db7300
msr:
800000000280b033
dar:
c00000005e980000
dsisr:
40000000
current = 0xc000000027af6880
paca = 0xc00000003ffd5200 irqmask: 0x03 irq_happened: 0x01
pid = 5167, comm = mount
<...>
enter ? for help
[
c000000015db7380]
c000000000782708 ext4_ext_clear_bb+0x378/0x410
[
c000000015db7400]
c000000000813f14 ext4_fc_replay+0x1794/0x2000
[
c000000015db7580]
c000000000833f7c do_one_pass+0xe9c/0x12a0
[
c000000015db7710]
c000000000834504 jbd2_journal_recover+0x184/0x2d0
[
c000000015db77c0]
c000000000841398 jbd2_journal_load+0x188/0x4a0
[
c000000015db7880]
c000000000804de8 ext4_fill_super+0x2638/0x3e10
[
c000000015db7a40]
c0000000005f8404 get_tree_bdev+0x2b4/0x350
[
c000000015db7ae0]
c0000000007ef058 ext4_get_tree+0x28/0x40
[
c000000015db7b00]
c0000000005f6344 vfs_get_tree+0x44/0x100
[
c000000015db7b70]
c00000000063c408 path_mount+0xdd8/0xe70
[
c000000015db7c40]
c00000000063c8f0 sys_mount+0x450/0x550
[
c000000015db7d50]
c000000000035770 system_call_exception+0x4a0/0x4e0
[
c000000015db7e10]
c00000000000c74c system_call_common+0xec/0x250
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/2609bc8f66fc15870616ee416a18a3d392a209c4.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ritesh Harjani [Wed, 16 Feb 2022 07:02:43 +0000 (12:32 +0530)]
ext4: correct cluster len and clusters changed accounting in ext4_mb_mark_bb
[ Upstream commit
a5c0e2fdf7cea535ba03259894dc184e5a4c2800 ]
ext4_mb_mark_bb() currently wrongly calculates cluster len (clen) and
flex_group->free_clusters. This patch fixes that.
Identified based on code review of ext4_mb_mark_bb() function.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/a0b035d536bafa88110b74456853774b64c8ac40.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Waiman Long [Fri, 11 Feb 2022 03:55:26 +0000 (22:55 -0500)]
locking/lockdep: Iterate lock_classes directly when reading lockdep files
[ Upstream commit
fb7275acd6fb988313dddd8d3d19efa70d9015ad ]
When dumping lock_classes information via /proc/lockdep, we can't take
the lockdep lock as the lock hold time is indeterminate. Iterating
over all_lock_classes without holding lock can be dangerous as there
is a slight chance that it may branch off to other lists leading to
infinite loop or even access invalid memory if changes are made to
all_lock_classes list in parallel.
To avoid this problem, iteration of lock classes is now done directly
on the lock_classes array itself. The lock_classes_in_use bitmap is
checked to see if the lock class is being used. To avoid iterating
the full array all the times, a new max_lock_class_idx value is added
to track the maximum lock_class index that is currently being used.
We can theoretically take the lockdep lock for iterating all_lock_classes
when other lockdep files (lockdep_stats and lock_stat) are accessed as
the lock hold time will be shorter for them. For consistency, they are
also modified to iterate the lock_classes array directly.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220211035526.1329503-2-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Minghao Chi [Tue, 15 Mar 2022 02:31:38 +0000 (02:31 +0000)]
spi: tegra20: Use of_device_get_match_data()
[ Upstream commit
c9839acfcbe20ce43d363c2a9d0772472d9921c0 ]
Use of_device_get_match_data() to simplify the code.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220315023138.2118293-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux-block.git / log