git.kernel.dk Git - linux-2.6-block.git/log

netfilter: nf_tables: set transport offset from mac header for netdev/egress

Before this patch, transport offset (pkt->thoff) provides an offset
relative to the network header. This is fine for the inet families
because skb->data points to the network header in such case. However,
from netdev/egress, skb->data points to the mac header (if available),
thus, pkt->thoff is missing the mac header length.

Add skb_network_offset() to the transport offset (pkt->thoff) for
netdev, so transport header mangling works as expected. Adjust payload
fast eval function to use skb->data now that pkt->thoff provides an
absolute offset. This explains why users report that matching on
egress/netdev works but payload mangling does not.

This patch implicitly fixes payload mangling for IPv4 packets in
netdev/egress given skb_store_bits() requires an offset from skb->data
to reach the transport header.

I suspect that nft_exthdr and the trace infra were also broken from
netdev/egress because they also take skb->data as start, and pkt->thoff
was not correct.

Note that IPv6 is fine because ipv6_find_hdr() already provides a
transport offset starting from skb->data, which includes
skb_network_offset().

The bridge family also uses nft_set_pktinfo_ipv4_validate(), but there
skb_network_offset() is zero, so the update in this patch does not alter
the existing behaviour.

Fixes: 42df6e1d221d ("netfilter: Introduce egress hook")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge branch 'check-vlan-filter-feature-in-vlan_vids_add_by_dev-and-vlan_vids_del_by_dev'

Liu Jian says:

====================
check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()

v2->v3:
Filter using vlan_hw_filter_capable().
Add one basic test.
====================

Link: https://lore.kernel.org/r/20231216075219.2379123-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests: add vlan hw filter tests

Add one basic vlan hw filter test.

Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()

I got the below warning trace:

WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify
CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0
Call Trace:
rtnl_dellink
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
__sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
entry_SYSCALL_64_after_hwframe

It can be repoduced via:

    ip netns add ns1
    ip netns exec ns1 ip link add bond0 type bond mode 0
    ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
    ip netns exec ns1 ip link set bond_slave_1 master bond0
[1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off
[2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0
[3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0
[4] ip netns exec ns1 ip link set bond_slave_1 nomaster
[5] ip netns exec ns1 ip link del veth2
    ip netns del ns1

This is all caused by command [1] turning off the rx-vlan-filter function
of bond0. The reason is the same as commit 01f4fd270870 ("bonding: Fix
incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands
[2] [3] add the same vid to slave and master respectively, causing
command [4] to empty slave->vlan_info. The following command [5] triggers
this problem.

To fix this problem, we should add VLAN_FILTER feature checks in
vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect
addition or deletion of vlan_vid information.

Fixes: 348a1443cc43 ("vlan: introduce functions to do mass addition/deletion of vids by another device")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: add new maintainer for the HNS3 ethernet driver

Jijie Shao will be responsible for
maintaining the hns3 driver's code in the future,
so add Jijie to the hns3 driver's matainer list.

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20231216070413.233668-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: mana: select PAGE_POOL

Mana uses PAGE_POOL API. x86_64 defconfig doesn't select it:

ld: vmlinux.o: in function `mana_create_page_pool.isra.0':
mana_en.c:(.text+0x9ae36f): undefined reference to `page_pool_create'
ld: vmlinux.o: in function `mana_get_rxfrag':
mana_en.c:(.text+0x9afed1): undefined reference to `page_pool_alloc_pages'
make[3]: *** [/home/yury/work/linux/scripts/Makefile.vmlinux:37: vmlinux] Error 1
make[2]: *** [/home/yury/work/linux/Makefile:1154: vmlinux] Error 2
make[1]: *** [/home/yury/work/linux/Makefile:234: __sub-make] Error 2
make[1]: Leaving directory '/home/yury/work/build-linux-x86_64'
make: *** [Makefile:234: __sub-make] Error 2

So we need to select it explicitly.

Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter")
Link: https://lore.kernel.org/r/20231215203353.635379-1-yury.norov@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ks8851: Fix TX stall caused by TX buffer overrun

There is a bug in the ks8851 Ethernet driver that more data is written
to the hardware TX buffer than actually available. This is caused by
wrong accounting of the free TX buffer space.

The driver maintains a tx_space variable that represents the TX buffer
space that is deemed to be free. The ks8851_start_xmit_spi() function
adds an SKB to a queue if tx_space is large enough and reduces tx_space
by the amount of buffer space it will later need in the TX buffer and
then schedules a work item. If there is not enough space then the TX
queue is stopped.

The worker function ks8851_tx_work() dequeues all the SKBs and writes
the data into the hardware TX buffer. The last packet will trigger an
interrupt after it was send. Here it is assumed that all data fits into
the TX buffer.

In the interrupt routine (which runs asynchronously because it is a
threaded interrupt) tx_space is updated with the current value from the
hardware. Also the TX queue is woken up again.

Now it could happen that after data was sent to the hardware and before
handling the TX interrupt new data is queued in ks8851_start_xmit_spi()
when the TX buffer space had still some space left. When the interrupt
is actually handled tx_space is updated from the hardware but now we
already have new SKBs queued that have not been written to the hardware
TX buffer yet. Since tx_space has been overwritten by the value from the
hardware the space is not accounted for.

Now we have more data queued then buffer space available in the hardware
and ks8851_tx_work() will potentially overrun the hardware TX buffer. In
many cases it will still work because often the buffer is written out
fast enough so that no overrun occurs but for example if the peer
throttles us via flow control then an overrun may happen.

This can be fixed in different ways. The most simple way would be to set
tx_space to 0 before writing data to the hardware TX buffer preventing
the queuing of more SKBs until the TX interrupt has been handled. I have
chosen a slightly more efficient (and still rather simple) way and
track the amount of data that is already queued and not yet written to
the hardware. When new SKBs are to be queued the already queued amount
of data is honoured when checking free TX buffer space.

I tested this with a setup of two linked KS8851 running iperf3 between
the two in bidirectional mode. Before the fix I got a stall after some
minutes. With the fix I saw now issues anymore after hours.

Fixes: 3ba81f3ece3c ("net: Micrel KS8851 SPI network driver")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231214181112.76052-1-rwahl@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'mptcp-misc-fixes'

Matthieu Baerts says:

====================
mptcp: misc. fixes for v6.7

Here are a few fixes related to MPTCP:

Patch 1 avoids skipping some subtests of the MPTCP Join selftest by
mistake when using older versions of GCC. This fixes a patch introduced
in v6.4, backported up to v6.1.

Patch 2 fixes an inconsistent state when using MPTCP + FastOpen. A fix
for v6.2.

Patch 3 adds a description for MPTCP Kunit test modules to avoid a
warning.

Patch 4 adds an entry to the mailmap file for Geliang's email addresses.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>

mailmap: add entries for Geliang Tang

Map Geliang's old mail addresses to his @linux.dev one.

Suggested-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: fill in missing MODULE_DESCRIPTION()

W=1 builds warn on missing MODULE_DESCRIPTION, add them here in MPTCP.

Only two were missing: two modules with different KUnit tests for MPTCP.

Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: fix inconsistent state on fastopen race

The netlink PM can race with fastopen self-connect attempts, shutting
down the first subflow via:

MPTCP_PM_CMD_DEL_ADDR -> mptcp_nl_remove_id_zero_address ->
  mptcp_pm_nl_rm_subflow_received -> mptcp_close_ssk

and transitioning such subflow to FIN_WAIT1 status before the syn-ack
packet is processed. The MPTCP code does not react to such state change,
leaving the connection in not-fallback status and the subflow handshake
uncompleted, triggering the following splat:

  WARNING: CPU: 0 PID: 10630 at net/mptcp/subflow.c:1405 subflow_data_ready+0x39f/0x690 net/mptcp/subflow.c:1405
  Modules linked in:
  CPU: 0 PID: 10630 Comm: kworker/u4:11 Not tainted 6.6.0-syzkaller-14500-g1c41041124bd #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
  Workqueue: bat_events batadv_nc_worker
  RIP: 0010:subflow_data_ready+0x39f/0x690 net/mptcp/subflow.c:1405
  Code: 18 89 ee e8 e3 d2 21 f7 40 84 ed 75 1f e8 a9 d7 21 f7 44 89 fe bf 07 00 00 00 e8 0c d3 21 f7 41 83 ff 07 74 07 e8 91 d7 21 f7 <0f> 0b e8 8a d7 21 f7 48 89 df e8 d2 b2 ff ff 31 ff 89 c5 89 c6 e8
  RSP: 0018:ffffc90000007448 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff888031efc700 RCX: ffffffff8a65baf4
  RDX: ffff888043222140 RSI: ffffffff8a65baff RDI: 0000000000000005
  RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007
  R10: 000000000000000b R11: 0000000000000000 R12: 1ffff92000000e89
  R13: ffff88807a534d80 R14: ffff888021c11a00 R15: 000000000000000b
  FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fa19a0ffc81 CR3: 000000007a2db000 CR4: 00000000003506f0
  DR0: 000000000000d8dd DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Call Trace:
   <IRQ>
   tcp_data_ready+0x14c/0x5b0 net/ipv4/tcp_input.c:5128
   tcp_data_queue+0x19c3/0x5190 net/ipv4/tcp_input.c:5208
   tcp_rcv_state_process+0x11ef/0x4e10 net/ipv4/tcp_input.c:6844
   tcp_v4_do_rcv+0x369/0xa10 net/ipv4/tcp_ipv4.c:1929
   tcp_v4_rcv+0x3888/0x3b30 net/ipv4/tcp_ipv4.c:2329
   ip_protocol_deliver_rcu+0x9f/0x480 net/ipv4/ip_input.c:205
   ip_local_deliver_finish+0x2e4/0x510 net/ipv4/ip_input.c:233
   NF_HOOK include/linux/netfilter.h:314 [inline]
   NF_HOOK include/linux/netfilter.h:308 [inline]
   ip_local_deliver+0x1b6/0x550 net/ipv4/ip_input.c:254
   dst_input include/net/dst.h:461 [inline]
   ip_rcv_finish+0x1c4/0x2e0 net/ipv4/ip_input.c:449
   NF_HOOK include/linux/netfilter.h:314 [inline]
   NF_HOOK include/linux/netfilter.h:308 [inline]
   ip_rcv+0xce/0x440 net/ipv4/ip_input.c:569
   __netif_receive_skb_one_core+0x115/0x180 net/core/dev.c:5527
   __netif_receive_skb+0x1f/0x1b0 net/core/dev.c:5641
   process_backlog+0x101/0x6b0 net/core/dev.c:5969
   __napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6531
   napi_poll net/core/dev.c:6600 [inline]
   net_rx_action+0x956/0xe90 net/core/dev.c:6733
   __do_softirq+0x21a/0x968 kernel/softirq.c:553
   do_softirq kernel/softirq.c:454 [inline]
   do_softirq+0xaa/0xe0 kernel/softirq.c:441
   </IRQ>
   <TASK>
   __local_bh_enable_ip+0xf8/0x120 kernel/softirq.c:381
   spin_unlock_bh include/linux/spinlock.h:396 [inline]
   batadv_nc_purge_paths+0x1ce/0x3c0 net/batman-adv/network-coding.c:471
   batadv_nc_worker+0x9b1/0x10e0 net/batman-adv/network-coding.c:722
   process_one_work+0x884/0x15c0 kernel/workqueue.c:2630
   process_scheduled_works kernel/workqueue.c:2703 [inline]
   worker_thread+0x8b9/0x1290 kernel/workqueue.c:2784
   kthread+0x33c/0x440 kernel/kthread.c:388
   ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
   </TASK>

To address the issue, catch the racing subflow state change and
use it to cause the MPTCP fallback. Such fallback is also used to
cause the first subflow state propagation to the msk socket via
mptcp_set_connected(). After this change, the first subflow can
additionally propagate the TCP_FIN_WAIT1 state, so rename the
helper accordingly.

Finally, if the state propagation is delayed to the msk release
callback, the first subflow can change to a different state in between.
Cache the relevant target state in a new msk-level field and use
such value to update the msk state at release time.

Fixes: 1e777f39b4d7 ("mptcp: add MSG_FASTOPEN sendmsg flag support")
Cc: stable@vger.kernel.org
Reported-by: <syzbot+c53d4d3ddb327e80bc51@syzkaller.appspotmail.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/458
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mptcp: join: fix subflow_send_ack lookup

MPC backups tests will skip unexpected sometimes (For example, when
compiling kernel with an older version of gcc, such as gcc-8), since
static functions like mptcp_subflow_send_ack also be listed in
/proc/kallsyms, with a 't' in front of it, not 'T' ('T' is for a global
function):

> grep "mptcp_subflow_send_ack" /proc/kallsyms

0000000000000000 T __pfx___mptcp_subflow_send_ack
0000000000000000 T __mptcp_subflow_send_ack
0000000000000000 t __pfx_mptcp_subflow_send_ack
0000000000000000 t mptcp_subflow_send_ack

In this case, mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"
will be false, MPC backups tests will skip. This is not what we expected.

The correct logic here should be: if mptcp_subflow_send_ack is not a
global function in /proc/kallsyms, do these MPC backups tests. So a 'T'
must be added in front of mptcp_subflow_send_ack.

Fixes: 632978f0a961 ("selftests: mptcp: join: skip MPC backups tests if not supported")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: skip LED triggers on PHYs on SFP modules

Calling led_trigger_register() when attaching a PHY located on an SFP
module potentially (and practically) leads into a deadlock.
Fix this by not calling led_trigger_register() for PHYs localted on SFP
modules as such modules actually never got any LEDs.

======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc4-next-20231208+ #0 Tainted: G           O
------------------------------------------------------
kworker/u8:2/43 is trying to acquire lock:
ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8

but task is already holding lock:
ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&sfp->sm_mutex){+.+.}-{3:3}:
       __mutex_lock+0x88/0x7a0
       mutex_lock_nested+0x20/0x28
       cleanup_module+0x2ae0/0x3120 [sfp]
       sfp_register_bus+0x5c/0x9c
       sfp_register_socket+0x48/0xd4
       cleanup_module+0x271c/0x3120 [sfp]
       platform_probe+0x64/0xb8
       really_probe+0x17c/0x3c0
       __driver_probe_device+0x78/0x164
       driver_probe_device+0x3c/0xd4
       __driver_attach+0xec/0x1f0
       bus_for_each_dev+0x60/0xa0
       driver_attach+0x20/0x28
       bus_add_driver+0x108/0x208
       driver_register+0x5c/0x118
       __platform_driver_register+0x24/0x2c
       init_module+0x28/0xa7c [sfp]
       do_one_initcall+0x70/0x2ec
       do_init_module+0x54/0x1e4
       load_module+0x1b78/0x1c8c
       __do_sys_init_module+0x1bc/0x2cc
       __arm64_sys_init_module+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #2 (rtnl_mutex){+.+.}-{3:3}:
       __mutex_lock+0x88/0x7a0
       mutex_lock_nested+0x20/0x28
       rtnl_lock+0x18/0x20
       set_device_name+0x30/0x130
       netdev_trig_activate+0x13c/0x1ac
       led_trigger_set+0x118/0x234
       led_trigger_write+0x104/0x17c
       sysfs_kf_bin_write+0x64/0x80
       kernfs_fop_write_iter+0x128/0x1b4
       vfs_write+0x178/0x2a4
       ksys_write+0x58/0xd4
       __arm64_sys_write+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #1 (&led_cdev->trigger_lock){++++}-{3:3}:
       down_write+0x4c/0x13c
       led_trigger_write+0xf8/0x17c
       sysfs_kf_bin_write+0x64/0x80
       kernfs_fop_write_iter+0x128/0x1b4
       vfs_write+0x178/0x2a4
       ksys_write+0x58/0xd4
       __arm64_sys_write+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #0 (triggers_list_lock){++++}-{3:3}:
       __lock_acquire+0x12a0/0x2014
       lock_acquire+0x100/0x2ac
       down_write+0x4c/0x13c
       led_trigger_register+0x4c/0x1a8
       phy_led_triggers_register+0x9c/0x214
       phy_attach_direct+0x154/0x36c
       phylink_attach_phy+0x30/0x60
       phylink_sfp_connect_phy+0x140/0x510
       sfp_add_phy+0x34/0x50
       init_module+0x15c/0xa7c [sfp]
       cleanup_module+0x1d94/0x3120 [sfp]
       cleanup_module+0x2bb4/0x3120 [sfp]
       process_one_work+0x1f8/0x4ec
       worker_thread+0x1e8/0x3d8
       kthread+0x104/0x110
       ret_from_fork+0x10/0x20

other info that might help us debug this:

Chain exists of:
  triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sfp->sm_mutex);
                               lock(rtnl_mutex);
                               lock(&sfp->sm_mutex);
  lock(triggers_list_lock);

*** DEADLOCK ***

4 locks held by kworker/u8:2/43:
#0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
#1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
#2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20
#3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]

stack backtrace:
CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G           O       6.7.0-rc4-next-20231208+ #0
Hardware name: Bananapi BPI-R4 (DT)
Workqueue: events_power_efficient cleanup_module [sfp]
Call trace:
dump_backtrace+0xa8/0x10c
show_stack+0x14/0x1c
dump_stack_lvl+0x5c/0xa0
dump_stack+0x14/0x1c
print_circular_bug+0x328/0x430
check_noncircular+0x124/0x134
__lock_acquire+0x12a0/0x2014
lock_acquire+0x100/0x2ac
down_write+0x4c/0x13c
led_trigger_register+0x4c/0x1a8
phy_led_triggers_register+0x9c/0x214
phy_attach_direct+0x154/0x36c
phylink_attach_phy+0x30/0x60
phylink_sfp_connect_phy+0x140/0x510
sfp_add_phy+0x34/0x50
init_module+0x15c/0xa7c [sfp]
cleanup_module+0x1d94/0x3120 [sfp]
cleanup_module+0x2bb4/0x3120 [sfp]
process_one_work+0x1f8/0x4ec
worker_thread+0x1e8/0x3d8
kthread+0x104/0x110
ret_from_fork+0x10/0x20

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_en: do not map packet buffers twice

Remove double-mapping of DMA buffers as it can prevent page pool entries
from being freed. Mapping is managed by page pool infrastructure and
was previously managed by the driver in __bnxt_alloc_rx_page before
allowing the page pool infrastructure to manage it.

Fixes: 578fcfd26e2a ("bnxt_en: Let the page pool manage the DMA mapping")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20231214213138.98095-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/rose: fix races in rose_kill_by_device()

syzbot found an interesting netdev refcounting issue in
net/rose/af_rose.c, thanks to CONFIG_NET_DEV_REFCNT_TRACKER=y [1]

Problem is that rose_kill_by_device() can change rose->device
while other threads do not expect the pointer to be changed.

We have to first collect sockets in a temporary array,
then perform the changes while holding the socket
lock and rose_list_lock spinlock (in this order)

Change rose_release() to also acquire rose_list_lock
before releasing the netdev refcount.

[1]

[ 1185.055088][ T7889] ref_tracker: reference already released.
[ 1185.061476][ T7889] ref_tracker: allocated in:
[ 1185.066081][ T7889]  rose_bind+0x4ab/0xd10
[ 1185.070446][ T7889]  __sys_bind+0x1ec/0x220
[ 1185.074818][ T7889]  __x64_sys_bind+0x72/0xb0
[ 1185.079356][ T7889]  do_syscall_64+0x40/0x110
[ 1185.083897][ T7889]  entry_SYSCALL_64_after_hwframe+0x63/0x6b
[ 1185.089835][ T7889] ref_tracker: freed in:
[ 1185.094088][ T7889]  rose_release+0x2f5/0x570
[ 1185.098629][ T7889]  __sock_release+0xae/0x260
[ 1185.103262][ T7889]  sock_close+0x1c/0x20
[ 1185.107453][ T7889]  __fput+0x270/0xbb0
[ 1185.111467][ T7889]  task_work_run+0x14d/0x240
[ 1185.116085][ T7889]  get_signal+0x106f/0x2790
[ 1185.120622][ T7889]  arch_do_signal_or_restart+0x90/0x7f0
[ 1185.126205][ T7889]  exit_to_user_mode_prepare+0x121/0x240
[ 1185.131846][ T7889]  syscall_exit_to_user_mode+0x1e/0x60
[ 1185.137293][ T7889]  do_syscall_64+0x4d/0x110
[ 1185.141783][ T7889]  entry_SYSCALL_64_after_hwframe+0x63/0x6b
[ 1185.148085][ T7889] ------------[ cut here ]------------

WARNING: CPU: 1 PID: 7889 at lib/ref_tracker.c:255 ref_tracker_free+0x61a/0x810 lib/ref_tracker.c:255
Modules linked in:
CPU: 1 PID: 7889 Comm: syz-executor.2 Not tainted 6.7.0-rc4-syzkaller-00162-g65c95f78917e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:ref_tracker_free+0x61a/0x810 lib/ref_tracker.c:255
Code: 00 44 8b 6b 18 31 ff 44 89 ee e8 21 62 f5 fc 45 85 ed 0f 85 a6 00 00 00 e8 a3 66 f5 fc 48 8b 34 24 48 89 ef e8 27 5f f1 05 90 <0f> 0b 90 bb ea ff ff ff e9 52 fd ff ff e8 84 66 f5 fc 4c 8d 6d 44
RSP: 0018:ffffc90004917850 EFLAGS: 00010202
RAX: 0000000000000201 RBX: ffff88802618f4c0 RCX: 0000000000000000
RDX: 0000000000000202 RSI: ffffffff8accb920 RDI: 0000000000000001
RBP: ffff8880269ea5b8 R08: 0000000000000001 R09: fffffbfff23e35f6
R10: ffffffff91f1afb7 R11: 0000000000000001 R12: 1ffff92000922f0c
R13: 0000000005a2039b R14: ffff88802618f4d8 R15: 00000000ffffffff
FS: 00007f0a720ef6c0(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f43a819d988 CR3: 0000000076c64000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
netdev_tracker_free include/linux/netdevice.h:4127 [inline]
netdev_put include/linux/netdevice.h:4144 [inline]
netdev_put include/linux/netdevice.h:4140 [inline]
rose_kill_by_device net/rose/af_rose.c:195 [inline]
rose_device_event+0x25d/0x330 net/rose/af_rose.c:218
notifier_call_chain+0xb6/0x3b0 kernel/notifier.c:93
call_netdevice_notifiers_info+0xbe/0x130 net/core/dev.c:1967
call_netdevice_notifiers_extack net/core/dev.c:2005 [inline]
call_netdevice_notifiers net/core/dev.c:2019 [inline]
__dev_notify_flags+0x1f5/0x2e0 net/core/dev.c:8646
dev_change_flags+0x122/0x170 net/core/dev.c:8682
dev_ifsioc+0x9ad/0x1090 net/core/dev_ioctl.c:529
dev_ioctl+0x224/0x1090 net/core/dev_ioctl.c:786
sock_do_ioctl+0x198/0x270 net/socket.c:1234
sock_ioctl+0x22e/0x6b0 net/socket.c:1339
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__x64_sys_ioctl+0x18f/0x210 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f0a7147cba9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f0a720ef0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f0a7159bf80 RCX: 00007f0a7147cba9
RDX: 0000000020000040 RSI: 0000000000008914 RDI: 0000000000000004
RBP: 00007f0a714c847a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f0a7159bf80 R15: 00007ffc8bb3a5f8
</TASK>

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Bernard Pidoux <f6bvp@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethernet: atheros: fix a memleak in atl1e_setup_ring_resources

In the error handling of 'offset > adapter->ring_size', the
tx_ring->tx_buffer allocated by kzalloc should be freed,
instead of 'goto failed' instantly.

Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: ife: fix potential use-after-free

ife_decode() calls pskb_may_pull() two times, we need to reload
ifehdr after the second one, or risk use-after-free as reported
by syzbot:

BUG: KASAN: slab-use-after-free in __ife_tlv_meta_valid net/ife/ife.c:108 [inline]
BUG: KASAN: slab-use-after-free in ife_tlv_meta_decode+0x1d1/0x210 net/ife/ife.c:131
Read of size 2 at addr ffff88802d7300a4 by task syz-executor.5/22323

CPU: 0 PID: 22323 Comm: syz-executor.5 Not tainted 6.7.0-rc3-syzkaller-00804-g074ac38d5b95 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
__ife_tlv_meta_valid net/ife/ife.c:108 [inline]
ife_tlv_meta_decode+0x1d1/0x210 net/ife/ife.c:131
tcf_ife_decode net/sched/act_ife.c:739 [inline]
tcf_ife_act+0x4e3/0x1cd0 net/sched/act_ife.c:879
tc_act include/net/tc_wrapper.h:221 [inline]
tcf_action_exec+0x1ac/0x620 net/sched/act_api.c:1079
tcf_exts_exec include/net/pkt_cls.h:344 [inline]
mall_classify+0x201/0x310 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:227 [inline]
__tcf_classify net/sched/cls_api.c:1703 [inline]
tcf_classify+0x82f/0x1260 net/sched/cls_api.c:1800
hfsc_classify net/sched/sch_hfsc.c:1147 [inline]
hfsc_enqueue+0x315/0x1060 net/sched/sch_hfsc.c:1546
dev_qdisc_enqueue+0x3f/0x230 net/core/dev.c:3739
__dev_xmit_skb net/core/dev.c:3828 [inline]
__dev_queue_xmit+0x1de1/0x3d30 net/core/dev.c:4311
dev_queue_xmit include/linux/netdevice.h:3165 [inline]
packet_xmit+0x237/0x350 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x24aa/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fe9acc7cae9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe9ada450c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007fe9acd9bf80 RCX: 00007fe9acc7cae9
RDX: 000000000000fce0 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 00007fe9accc847a R08: 0000000020000140 R09: 0000000000000014
R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fe9acd9bf80 R15: 00007ffd5427ae78
</TASK>

Allocated by task 22323:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:374 [inline]
__kasan_kmalloc+0xa2/0xb0 mm/kasan/common.c:383
kasan_kmalloc include/linux/kasan.h:198 [inline]
__do_kmalloc_node mm/slab_common.c:1007 [inline]
__kmalloc_node_track_caller+0x5a/0x90 mm/slab_common.c:1027
kmalloc_reserve+0xef/0x260 net/core/skbuff.c:582
__alloc_skb+0x12b/0x330 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1298 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x1e2a/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Freed by task 22323:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:164 [inline]
slab_free_hook mm/slub.c:1800 [inline]
slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826
slab_free mm/slub.c:3809 [inline]
__kmem_cache_free+0xc0/0x180 mm/slub.c:3822
skb_kfree_head net/core/skbuff.c:950 [inline]
skb_free_head+0x110/0x1b0 net/core/skbuff.c:962
pskb_expand_head+0x3c5/0x1170 net/core/skbuff.c:2130
__pskb_pull_tail+0xe1/0x1830 net/core/skbuff.c:2655
pskb_may_pull_reason include/linux/skbuff.h:2685 [inline]
pskb_may_pull include/linux/skbuff.h:2693 [inline]
ife_decode+0x394/0x4f0 net/ife/ife.c:82
tcf_ife_decode net/sched/act_ife.c:727 [inline]
tcf_ife_act+0x43b/0x1cd0 net/sched/act_ife.c:879
tc_act include/net/tc_wrapper.h:221 [inline]
tcf_action_exec+0x1ac/0x620 net/sched/act_api.c:1079
tcf_exts_exec include/net/pkt_cls.h:344 [inline]
mall_classify+0x201/0x310 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:227 [inline]
__tcf_classify net/sched/cls_api.c:1703 [inline]
tcf_classify+0x82f/0x1260 net/sched/cls_api.c:1800
hfsc_classify net/sched/sch_hfsc.c:1147 [inline]
hfsc_enqueue+0x315/0x1060 net/sched/sch_hfsc.c:1546
dev_qdisc_enqueue+0x3f/0x230 net/core/dev.c:3739
__dev_xmit_skb net/core/dev.c:3828 [inline]
__dev_queue_xmit+0x1de1/0x3d30 net/core/dev.c:4311
dev_queue_xmit include/linux/netdevice.h:3165 [inline]
packet_xmit+0x237/0x350 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x24aa/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

The buggy address belongs to the object at ffff88802d730000
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 164 bytes inside of
freed 8192-byte region [ffff88802d730000, ffff88802d732000)

The buggy address belongs to the physical page:
page:ffffea0000b5cc00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2d730
head:ffffea0000b5cc00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfff00000000840(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000840 ffff888013042280 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 22323, tgid 22320 (syz-executor.5), ts 950317230369, free_ts 950233467461
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x2d0/0x350 mm/page_alloc.c:1544
prep_new_page mm/page_alloc.c:1551 [inline]
get_page_from_freelist+0xa28/0x3730 mm/page_alloc.c:3319
__alloc_pages+0x22e/0x2420 mm/page_alloc.c:4575
alloc_pages_mpol+0x258/0x5f0 mm/mempolicy.c:2133
alloc_slab_page mm/slub.c:1870 [inline]
allocate_slab mm/slub.c:2017 [inline]
new_slab+0x283/0x3c0 mm/slub.c:2070
___slab_alloc+0x979/0x1500 mm/slub.c:3223
__slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322
__slab_alloc_node mm/slub.c:3375 [inline]
slab_alloc_node mm/slub.c:3468 [inline]
__kmem_cache_alloc_node+0x131/0x310 mm/slub.c:3517
__do_kmalloc_node mm/slab_common.c:1006 [inline]
__kmalloc_node_track_caller+0x4a/0x90 mm/slab_common.c:1027
kmalloc_reserve+0xef/0x260 net/core/skbuff.c:582
__alloc_skb+0x12b/0x330 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1298 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x1e2a/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1144 [inline]
free_unref_page_prepare+0x53c/0xb80 mm/page_alloc.c:2354
free_unref_page+0x33/0x3b0 mm/page_alloc.c:2494
__unfreeze_partials+0x226/0x240 mm/slub.c:2655
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x18e/0x1d0 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
slab_alloc mm/slub.c:3486 [inline]
__kmem_cache_alloc_lru mm/slub.c:3493 [inline]
kmem_cache_alloc_lru+0x219/0x6f0 mm/slub.c:3509
alloc_inode_sb include/linux/fs.h:2937 [inline]
ext4_alloc_inode+0x28/0x650 fs/ext4/super.c:1408
alloc_inode+0x5d/0x220 fs/inode.c:261
new_inode_pseudo fs/inode.c:1006 [inline]
new_inode+0x22/0x260 fs/inode.c:1032
__ext4_new_inode+0x333/0x5200 fs/ext4/ialloc.c:958
ext4_symlink+0x5d7/0xa20 fs/ext4/namei.c:3398
vfs_symlink fs/namei.c:4464 [inline]
vfs_symlink+0x3e5/0x620 fs/namei.c:4448
do_symlinkat+0x25f/0x310 fs/namei.c:4490
__do_sys_symlinkat fs/namei.c:4506 [inline]
__se_sys_symlinkat fs/namei.c:4503 [inline]
__x64_sys_symlinkat+0x97/0xc0 fs/namei.c:4503
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82

Fixes: d57493d6d1be ("net: sched: ife: check on metadata length")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Alexander Aring <aahringo@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Return error from sk_stream_wait_connect() if sk_wait_event() fails

The following NULL pointer dereference issue occurred:

BUG: kernel NULL pointer dereference, address: 0000000000000000
<...>
RIP: 0010:ccid_hc_tx_send_packet net/dccp/ccid.h:166 [inline]
RIP: 0010:dccp_write_xmit+0x49/0x140 net/dccp/output.c:356
<...>
Call Trace:
<TASK>
dccp_sendmsg+0x642/0x7e0 net/dccp/proto.c:801
inet_sendmsg+0x63/0x90 net/ipv4/af_inet.c:846
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x83/0xe0 net/socket.c:745
____sys_sendmsg+0x443/0x510 net/socket.c:2558
___sys_sendmsg+0xe5/0x150 net/socket.c:2612
__sys_sendmsg+0xa6/0x120 net/socket.c:2641
__do_sys_sendmsg net/socket.c:2650 [inline]
__se_sys_sendmsg net/socket.c:2648 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2648
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x43/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

sk_wait_event() returns an error (-EPIPE) if disconnect() is called on the
socket waiting for the event. However, sk_stream_wait_connect() returns
success, i.e. zero, even if sk_wait_event() returns -EPIPE, so a function
that waits for a connection with sk_stream_wait_connect() may misbehave.

In the case of the above DCCP issue, dccp_sendmsg() is waiting for the
connection. If disconnect() is called in concurrently, the above issue
occurs.

This patch fixes the issue by returning error from sk_stream_wait_connect()
if sk_wait_event() fails.

Fixes: 419ce133ab92 ("tcp: allow again tcp_disconnect() when threads are waiting")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reported-by: syzbot+c71bc336c5061153b502@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-pf: Fix graceful exit during PFC configuration failure

During PFC configuration failure the code was not handling a graceful
exit. This patch fixes the same and add proper code for a graceful exit.

Fixes: 99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: libwx: fix memory leak on free page

ifconfig ethx up, will set page->refcount larger than 1,
and then ifconfig ethx down, calling __page_frag_cache_drain()
to free pages, it is not compatible with page pool.
So deleting codes which changing page->refcount.

Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Signed-off-by: duanqiangwen <duanqiangwen@net-swift.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-2023-12-14' of git://git./linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
* add (and fix) certificate for regdb handover to Chen-Yu Tsai
* fix rfkill GPIO handling
* a few driver (iwlwifi, mt76) crash fixes
* logic fixes in the stack

* tag 'wireless-2023-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: cfg80211: fix certs build to not depend on file order
  wifi: mt76: fix crash with WED rx support enabled
  wifi: iwlwifi: pcie: avoid a NULL pointer dereference
  wifi: mac80211: mesh_plink: fix matches_local logic
  wifi: mac80211: mesh: check element parsing succeeded
  wifi: mac80211: check defragmentation succeeded
  wifi: mac80211: don't re-add debugfs during reconfig
  net: rfkill: gpio: set GPIO direction
  wifi: mac80211: check if the existing link config remains unchanged
  wifi: cfg80211: Add my certificate
  wifi: iwlwifi: pcie: add another missing bh-disable for rxq->lock
  wifi: ieee80211: don't require protected vendor action frames
====================

Link: https://lore.kernel.org/r/20231214111515.60626-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mlx5-fixes-2023-12-13' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2023-12-13

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Correct snprintf truncation handling for fw_version buffer used by representors
  net/mlx5e: Correct snprintf truncation handling for fw_version buffer
  net/mlx5e: Fix error codes in alloc_branch_attr()
  net/mlx5e: Fix error code in mlx5e_tc_action_miss_mapping_get()
  net/mlx5: Refactor mlx5_flow_destination->rep pointer to vport num
  net/mlx5: Fix fw tracer first block check
  net/mlx5e: XDP, Drop fragmented packets larger than MTU size
  net/mlx5e: Decrease num_block_tc when unblock tc offload
  net/mlx5e: Fix overrun reported by coverity
  net/mlx5e: fix a potential double-free in fs_udp_create_groups
  net/mlx5e: Fix a race in command alloc flow
  net/mlx5e: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()
  net/mlx5e: fix double free of encap_header
  Revert "net/mlx5e: fix double free of encap_header"
  Revert "net/mlx5e: fix double free of encap_header in update funcs"
====================

Link: https://lore.kernel.org/r/20231214012505.42666-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-12-13 (ice, i40e)

This series contains updates to ice and i40e drivers.

Michal Schmidt prevents possible out-of-bounds access for ice.

Ivan Vecera corrects value for MDIO clause 45 on i40e.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix ST code value for Clause 45
ice: fix theoretical out-of-bounds access in ethtool link modes
====================

Link: https://lore.kernel.org/r/20231213220827.1311772-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: fix pMAC TX RMON stats for bucket 256-511 and above

The typo from ocelot_port_rmon_stats_cb() was also carried over to
ocelot_port_pmac_rmon_stats_cb() as well, leading to incorrect TX RMON
stats for the pMAC too.

Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231214000902.545625-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: fix eMAC TX RMON stats for bucket 256-511 and above

There is a typo in the driver due to which we report incorrect TX RMON
counters for the 256-511 octet bucket and all the other buckets larger
than that.

Bug found with the selftest at
https://patchwork.kernel.org/project/netdevbpf/patch/20231211223346.2497157-9-tobias@waldekranz.com/

Fixes: e32036e1ae7b ("net: mscc: ocelot: add support for all sorts of standardized counters present in DSA")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231214000902.545625-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.7-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Current release - regressions:

   - tcp: fix tcp_disordered_ack() vs usec TS resolution

  Current release - new code bugs:

   - dpll: sanitize possible null pointer dereference in
     dpll_pin_parent_pin_set()

   - eth: octeon_ep: initialise control mbox tasks before using APIs

  Previous releases - regressions:

   - io_uring/af_unix: disable sending io_uring over sockets

   - eth: mlx5e:
       - TC, don't offload post action rule if not supported
       - fix possible deadlock on mlx5e_tx_timeout_work

   - eth: iavf: fix iavf_shutdown to call iavf_remove instead iavf_close

   - eth: bnxt_en: fix skb recycling logic in bnxt_deliver_skb()

   - eth: ena: fix DMA syncing in XDP path when SWIOTLB is on

   - eth: team: fix use-after-free when an option instance allocation
     fails

  Previous releases - always broken:

   - neighbour: don't let neigh_forced_gc() disable preemption for long

   - net: prevent mss overflow in skb_segment()

   - ipv6: support reporting otherwise unknown prefix flags in
     RTM_NEWPREFIX

   - tcp: remove acked SYN flag from packet in the transmit queue
     correctly

   - eth: octeontx2-af:
       - fix a use-after-free in rvu_nix_register_reporters
       - fix promisc mcam entry action

   - eth: dwmac-loongson: make sure MDIO is initialized before use

   - eth: atlantic: fix double free in ring reinit logic"

* tag 'net-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  net: atlantic: fix double free in ring reinit logic
  appletalk: Fix Use-After-Free in atalk_ioctl
  net: stmmac: Handle disabled MDIO busses from devicetree
  net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX
  dpaa2-switch: do not ask for MDB, VLAN and FDB replay
  dpaa2-switch: fix size of the dma_unmap
  net: prevent mss overflow in skb_segment()
  vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()
  Revert "tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set"
  MIPS: dts: loongson: drop incorrect dwmac fallback compatible
  stmmac: dwmac-loongson: drop useless check for compatible fallback
  stmmac: dwmac-loongson: Make sure MDIO is initialized before use
  tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set
  dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set()
  net: ena: Fix XDP redirection error
  net: ena: Fix DMA syncing in XDP path when SWIOTLB is on
  net: ena: Fix xdp drops handling due to multibuf packets
  net: ena: Destroy correct number of xdp queues upon failure
  net: Remove acked SYN flag from packet in the transmit queue correctly
  qed: Fix a potential use-after-free in qed_cxt_tables_alloc
  ...

Merge tag 'for-6.7-rc5-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
  "Some fixes to quota accounting code, mostly around error handling and
   correctness:

   - free reserves on various error paths, after IO errors or
     transaction abort

   - don't clear reserved range at the folio release time, it'll be
     properly cleared after final write

   - fix integer overflow due to int used when passing around size of
     freed reservations

   - fix a regression in squota accounting that missed some cases with
     delayed refs"

* tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: ensure releasing squota reserve on head refs
  btrfs: don't clear qgroup reserved bit in release_folio
  btrfs: free qgroup pertrans reserve on transaction abort
  btrfs: fix qgroup_free_reserved_data int overflow
  btrfs: free qgroup reserve when ORDERED_IOERR is set

net: atlantic: fix double free in ring reinit logic

Driver has a logic leak in ring data allocation/free,
where double free may happen in aq_ring_free if system is under
stress and driver init/deinit is happening.

The probability is higher to get this during suspend/resume cycle.

Verification was done simulating same conditions with

stress -m 2000 --vm-bytes 20M --vm-hang 10 --backoff 1000
while true; do sudo ifconfig enp1s0 down; sudo ifconfig enp1s0 up; done

Fixed by explicitly clearing pointers to NULL on deallocation

Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/netdev/CAHk-=wiZZi7FcvqVSUirHBjx0bBUZ4dFrMDVLc3+3HCrtq0rBA@mail.gmail.com/
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231213094044.22988-1-irusskikh@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

appletalk: Fix Use-After-Free in atalk_ioctl

Because atalk_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with atalk_recvmsg().
A use-after-free for skb occurs with the following flow.
```
atalk_ioctl() -> skb_peek()
atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: stmmac: Handle disabled MDIO busses from devicetree

Many hardware configurations have the MDIO bus disabled, and are instead
using some other MDIO bus to talk to the MAC's phy.

of_mdiobus_register() returns -ENODEV in this case. Let's handle it
gracefully instead of failing to probe the MAC.

Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX

In 10M SGMII mode all the packets are being dropped due to wrong Rx clock.
SGMII 10MBPS mode needs RX clock divider programmed to avoid drops in Rx.
Update configure SGMII function with Rx clk divider programming.

Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20231212092208.22393-1-quic_snehshah@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

wifi: cfg80211: fix certs build to not depend on file order

The file for the new certificate (Chen-Yu Tsai's) didn't
end with a comma, so depending on the file order in the
build rule, we'd end up with invalid C when concatenating
the (now two) certificates. Fix that.

Cc: stable@vger.kernel.org
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: fb768d3b13ff ("wifi: cfg80211: Add my certificate")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-12-12 (iavf)

This series contains updates to iavf driver only.

Piotr reworks Flow Director states to deal with issues in restoring
filters.

Slawomir fixes shutdown processing as it was missing needed calls.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: Fix iavf_shutdown to call iavf_remove instead iavf_close
  iavf: Handle ntuple on/off based on new state machines for flow director
  iavf: Introduce new state machines for flow director
====================

Link: https://lore.kernel.org/r/20231212203613.513423-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'dpaa2-switch-various-fixes'

Ioana Ciornei says:

====================
dpaa2-switch: various fixes

The first patch fixes the size passed to two dma_unmap_single() calls
which was wrongly put as the size of the pointer.

The second patch is new to this series and reverts the behavior of the
dpaa2-switch driver to not ask for object replay upon offloading so that
we avoid the errors encountered when a VLAN is installed multiple times
on the same port.
====================

Link: https://lore.kernel.org/r/20231212164326.2753457-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dpaa2-switch: do not ask for MDB, VLAN and FDB replay

Starting with commit 4e51bf44a03a ("net: bridge: move the switchdev
object replay helpers to "push" mode") the switchdev_bridge_port_offload()
helper was extended with the intention to provide switchdev drivers easy
access to object addition and deletion replays. This works by calling
the replay helpers with non-NULL notifier blocks.

In the same commit, the dpaa2-switch driver was updated so that it
passes valid notifier blocks to the helper. At that moment, no
regression was identified through testing.

In the meantime, the blamed commit changed the behavior in terms of
which ports get hit by the replay. Before this commit, only the initial
port which identified itself as offloaded through
switchdev_bridge_port_offload() got a replay of all port objects and
FDBs. After this, the newly joining port will trigger a replay of
objects on all bridge ports and on the bridge itself.

This behavior leads to errors in dpaa2_switch_port_vlans_add() when a
VLAN gets installed on the same interface multiple times.

The intended mechanism to address this is to pass a non-NULL ctx to the
switchdev_bridge_port_offload() helper and then check it against the
port's private structure. But since the driver does not have any use for
the replayed port objects and FDBs until it gains support for LAG
offload, it's better to fix the issue by reverting the dpaa2-switch
driver to not ask for replay. The pointers will be added back when we
are prepared to ignore replays on unrelated ports.

Fixes: b28d580e2939 ("net: bridge: switchdev: replay all VLAN groups")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-3-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dpaa2-switch: fix size of the dma_unmap

The size of the DMA unmap was wrongly put as a sizeof of a pointer.
Change the value of the DMA unmap to be the actual macro used for the
allocation and the DMA map.

Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: prevent mss overflow in skb_segment()

Once again syzbot is able to crash the kernel in skb_segment() [1]

GSO_BY_FRAGS is a forbidden value, but unfortunately the following
computation in skb_segment() can reach it quite easily :

mss = mss * partial_segs;

65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to
a bad final result.

Make sure to limit segmentation so that the new mss value is smaller
than GSO_BY_FRAGS.

[1]

general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626
__dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f8692032aa9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9
RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480
R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()

We need to do signed arithmetic if we expect condition
`if (bytes < 0)` to be possible

Found by Linux Verification Center (linuxtesting.org) with SVACE

Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Correct snprintf truncation handling for fw_version buffer used by representors

snprintf returns the length of the formatted string, excluding the trailing
null, without accounting for truncation. This means that is the return
value is greater than or equal to the size parameter, the fw_version string
was truncated.

Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf
Fixes: 1b2bd0c0264f ("net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Correct snprintf truncation handling for fw_version buffer

snprintf returns the length of the formatted string, excluding the trailing
null, without accounting for truncation. This means that is the return
value is greater than or equal to the size parameter, the fw_version string
was truncated.

Reported-by: David Laight <David.Laight@ACULAB.COM>
Closes: https://lore.kernel.org/netdev/81cae734ee1b4cde9b380a9a31006c1a@AcuMS.aculab.com/
Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf
Fixes: 41e63c2baa11 ("net/mlx5e: Check return value of snprintf writing to fw_version buffer")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix error codes in alloc_branch_attr()

Set the error code if set_branch_dest_ft() fails.

Fixes: ccbe33003b10 ("net/mlx5e: TC, Don't offload post action rule if not supported")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix error code in mlx5e_tc_action_miss_mapping_get()

Preserve the error code if esw_add_restore_rule() fails. Don't return
success.

Fixes: 6702782845a5 ("net/mlx5e: TC, Set CT miss to the specific ct action instance")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Refactor mlx5_flow_destination->rep pointer to vport num

Currently the destination rep pointer is only used for comparisons or to
obtain vport number from it. Since it is used both during flow creation and
deletion it may point to representor of another eswitch instance which can
be deallocated during driver unload even when there are rules pointing to
it[0]. Refactor the code to store vport number and 'valid' flag instead of
the representor pointer.

[0]:
[176805.886303] ==================================================================
[176805.889433] BUG: KASAN: slab-use-after-free in esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.892981] Read of size 2 at addr ffff888155090aa0 by task modprobe/27280

[176805.895462] CPU: 3 PID: 27280 Comm: modprobe Tainted: G    B              6.6.0-rc3+ #1
[176805.896771] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[176805.898514] Call Trace:
[176805.899026]  <TASK>
[176805.899519]  dump_stack_lvl+0x33/0x50
[176805.900221]  print_report+0xc2/0x610
[176805.900893]  ? mlx5_chains_put_table+0x33d/0x8d0 [mlx5_core]
[176805.901897]  ? esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.902852]  kasan_report+0xac/0xe0
[176805.903509]  ? esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.904461]  esw_cleanup_dests+0x390/0x440 [mlx5_core]
[176805.905223]  __mlx5_eswitch_del_rule+0x1ae/0x460 [mlx5_core]
[176805.906044]  ? esw_cleanup_dests+0x440/0x440 [mlx5_core]
[176805.906822]  ? xas_find_conflict+0x420/0x420
[176805.907496]  ? down_read+0x11e/0x200
[176805.908046]  mlx5e_tc_rule_unoffload+0xc4/0x2a0 [mlx5_core]
[176805.908844]  mlx5e_tc_del_fdb_flow+0x7da/0xb10 [mlx5_core]
[176805.909597]  mlx5e_flow_put+0x4b/0x80 [mlx5_core]
[176805.910275]  mlx5e_delete_flower+0x5b4/0xb70 [mlx5_core]
[176805.911010]  tc_setup_cb_reoffload+0x27/0xb0
[176805.911648]  fl_reoffload+0x62d/0x900 [cls_flower]
[176805.912313]  ? mlx5e_rep_indr_block_unbind+0xd0/0xd0 [mlx5_core]
[176805.913151]  ? __fl_put+0x230/0x230 [cls_flower]
[176805.913768]  ? filter_irq_stacks+0x90/0x90
[176805.914335]  ? kasan_save_stack+0x1e/0x40
[176805.914893]  ? kasan_set_track+0x21/0x30
[176805.915484]  ? kasan_save_free_info+0x27/0x40
[176805.916105]  tcf_block_playback_offloads+0x79/0x1f0
[176805.916773]  ? mlx5e_rep_indr_block_unbind+0xd0/0xd0 [mlx5_core]
[176805.917647]  tcf_block_unbind+0x12d/0x330
[176805.918239]  tcf_block_offload_cmd.isra.0+0x24e/0x320
[176805.918953]  ? tcf_block_bind+0x770/0x770
[176805.919551]  ? _raw_read_unlock_irqrestore+0x30/0x30
[176805.920236]  ? mutex_lock+0x7d/0xd0
[176805.920735]  ? mutex_unlock+0x80/0xd0
[176805.921255]  tcf_block_offload_unbind+0xa5/0x120
[176805.921909]  __tcf_block_put+0xc2/0x2d0
[176805.922467]  ingress_destroy+0xf4/0x3d0 [sch_ingress]
[176805.923178]  __qdisc_destroy+0x9d/0x280
[176805.923741]  dev_shutdown+0x1c6/0x330
[176805.924295]  unregister_netdevice_many_notify+0x6ef/0x1500
[176805.925034]  ? netdev_freemem+0x50/0x50
[176805.925610]  ? _raw_spin_lock_irq+0x7b/0xd0
[176805.926235]  ? _raw_spin_lock_bh+0xe0/0xe0
[176805.926849]  unregister_netdevice_queue+0x1e0/0x280
[176805.927592]  ? unregister_netdevice_many+0x10/0x10
[176805.928275]  unregister_netdev+0x18/0x20
[176805.928835]  mlx5e_vport_rep_unload+0xc0/0x200 [mlx5_core]
[176805.929608]  mlx5_esw_offloads_unload_rep+0x9d/0xc0 [mlx5_core]
[176805.930492]  mlx5_eswitch_unload_vf_vports+0x108/0x1a0 [mlx5_core]
[176805.931422]  ? mlx5_eswitch_unload_sf_vport+0x50/0x50 [mlx5_core]
[176805.932304]  ? rwsem_down_write_slowpath+0x11f0/0x11f0
[176805.932987]  mlx5_eswitch_disable_sriov+0x6f9/0xa60 [mlx5_core]
[176805.933807]  ? mlx5_core_disable_hca+0xe1/0x130 [mlx5_core]
[176805.934576]  ? mlx5_eswitch_disable_locked+0x580/0x580 [mlx5_core]
[176805.935463]  mlx5_device_disable_sriov+0x138/0x490 [mlx5_core]
[176805.936308]  mlx5_sriov_disable+0x8c/0xb0 [mlx5_core]
[176805.937063]  remove_one+0x7f/0x210 [mlx5_core]
[176805.937711]  pci_device_remove+0x96/0x1c0
[176805.938289]  device_release_driver_internal+0x361/0x520
[176805.938981]  ? kobject_put+0x5c/0x330
[176805.939553]  driver_detach+0xd7/0x1d0
[176805.940101]  bus_remove_driver+0x11f/0x290
[176805.943847]  pci_unregister_driver+0x23/0x1f0
[176805.944505]  mlx5_cleanup+0xc/0x20 [mlx5_core]
[176805.945189]  __x64_sys_delete_module+0x2b3/0x450
[176805.945837]  ? module_flags+0x300/0x300
[176805.946377]  ? dput+0xc2/0x830
[176805.946848]  ? __kasan_record_aux_stack+0x9c/0xb0
[176805.947555]  ? __call_rcu_common.constprop.0+0x46c/0xb50
[176805.948338]  ? fpregs_assert_state_consistent+0x1d/0xa0
[176805.949055]  ? exit_to_user_mode_prepare+0x30/0x120
[176805.949713]  do_syscall_64+0x3d/0x90
[176805.950226]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[176805.950904] RIP: 0033:0x7f7f42c3f5ab
[176805.951462] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48
[176805.953710] RSP: 002b:00007fff07dc9d08 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[176805.954691] RAX: ffffffffffffffda RBX: 000055b6e91c01e0 RCX: 00007f7f42c3f5ab
[176805.955691] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6e91c0248
[176805.956662] RBP: 000055b6e91c01e0 R08: 0000000000000000 R09: 0000000000000000
[176805.957601] R10: 00007f7f42d9eac0 R11: 0000000000000206 R12: 000055b6e91c0248
[176805.958593] R13: 0000000000000000 R14: 000055b6e91bfb38 R15: 0000000000000000
[176805.959599]  </TASK>

[176805.960324] Allocated by task 20490:
[176805.960893]  kasan_save_stack+0x1e/0x40
[176805.961463]  kasan_set_track+0x21/0x30
[176805.962019]  __kasan_kmalloc+0x77/0x90
[176805.962554]  esw_offloads_init+0x1bb/0x480 [mlx5_core]
[176805.963318]  mlx5_eswitch_init+0xc70/0x15c0 [mlx5_core]
[176805.964092]  mlx5_init_one_devl_locked+0x366/0x1230 [mlx5_core]
[176805.964902]  probe_one+0x6f7/0xc90 [mlx5_core]
[176805.965541]  local_pci_probe+0xd7/0x180
[176805.966075]  pci_device_probe+0x231/0x6f0
[176805.966631]  really_probe+0x1d4/0xb50
[176805.967179]  __driver_probe_device+0x18d/0x450
[176805.967810]  driver_probe_device+0x49/0x120
[176805.968431]  __driver_attach+0x1fb/0x490
[176805.968976]  bus_for_each_dev+0xed/0x170
[176805.969560]  bus_add_driver+0x21a/0x570
[176805.970124]  driver_register+0x133/0x460
[176805.970684]  0xffffffffa0678065
[176805.971180]  do_one_initcall+0x92/0x2b0
[176805.971744]  do_init_module+0x22d/0x720
[176805.972318]  load_module+0x58c3/0x63b0
[176805.972847]  init_module_from_file+0xd2/0x130
[176805.973441]  __x64_sys_finit_module+0x389/0x7c0
[176805.974045]  do_syscall_64+0x3d/0x90
[176805.974556]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

[176805.975566] Freed by task 27280:
[176805.976077]  kasan_save_stack+0x1e/0x40
[176805.976655]  kasan_set_track+0x21/0x30
[176805.977221]  kasan_save_free_info+0x27/0x40
[176805.977834]  ____kasan_slab_free+0x11a/0x1b0
[176805.978505]  __kmem_cache_free+0x163/0x2d0
[176805.979113]  esw_offloads_cleanup_reps+0xb8/0x120 [mlx5_core]
[176805.979963]  mlx5_eswitch_cleanup+0x182/0x270 [mlx5_core]
[176805.980763]  mlx5_cleanup_once+0x9a/0x1e0 [mlx5_core]
[176805.981477]  mlx5_uninit_one+0xa9/0x180 [mlx5_core]
[176805.982196]  remove_one+0x8f/0x210 [mlx5_core]
[176805.982868]  pci_device_remove+0x96/0x1c0
[176805.983461]  device_release_driver_internal+0x361/0x520
[176805.984169]  driver_detach+0xd7/0x1d0
[176805.984702]  bus_remove_driver+0x11f/0x290
[176805.985261]  pci_unregister_driver+0x23/0x1f0
[176805.985847]  mlx5_cleanup+0xc/0x20 [mlx5_core]
[176805.986483]  __x64_sys_delete_module+0x2b3/0x450
[176805.987126]  do_syscall_64+0x3d/0x90
[176805.987665]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

[176805.988667] Last potentially related work creation:
[176805.989305]  kasan_save_stack+0x1e/0x40
[176805.989839]  __kasan_record_aux_stack+0x9c/0xb0
[176805.990443]  kvfree_call_rcu+0x84/0xa30
[176805.990973]  clean_xps_maps+0x265/0x6e0
[176805.991547]  netif_reset_xps_queues.part.0+0x3f/0x80
[176805.992226]  unregister_netdevice_many_notify+0xfcf/0x1500
[176805.992966]  unregister_netdevice_queue+0x1e0/0x280
[176805.993638]  unregister_netdev+0x18/0x20
[176805.994205]  mlx5e_remove+0xba/0x1e0 [mlx5_core]
[176805.994872]  auxiliary_bus_remove+0x52/0x70
[176805.995490]  device_release_driver_internal+0x361/0x520
[176805.996196]  bus_remove_device+0x1e1/0x3d0
[176805.996767]  device_del+0x390/0x980
[176805.997270]  mlx5_rescan_drivers_locked.part.0+0x130/0x540 [mlx5_core]
[176805.998195]  mlx5_unregister_device+0x77/0xc0 [mlx5_core]
[176805.998989]  mlx5_uninit_one+0x41/0x180 [mlx5_core]
[176805.999719]  remove_one+0x8f/0x210 [mlx5_core]
[176806.000387]  pci_device_remove+0x96/0x1c0
[176806.000938]  device_release_driver_internal+0x361/0x520
[176806.001612]  unbind_store+0xd8/0xf0
[176806.002108]  kernfs_fop_write_iter+0x2c0/0x440
[176806.002748]  vfs_write+0x725/0xba0
[176806.003294]  ksys_write+0xed/0x1c0
[176806.003823]  do_syscall_64+0x3d/0x90
[176806.004357]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

[176806.005317] The buggy address belongs to the object at ffff888155090a80
                 which belongs to the cache kmalloc-64 of size 64
[176806.006774] The buggy address is located 32 bytes inside of
                 freed 64-byte region [ffff888155090a80, ffff888155090ac0)

[176806.008773] The buggy address belongs to the physical page:
[176806.009480] page:00000000a407e0e6 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155090
[176806.010633] flags: 0x200000000000800(slab|node=0|zone=2)
[176806.011352] page_type: 0xffffffff()
[176806.011905] raw: 0200000000000800 ffff888100042640 ffffea000422b1c0 dead000000000004
[176806.012949] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[176806.013933] page dumped because: kasan: bad access detected

[176806.014935] Memory state around the buggy address:
[176806.015601]  ffff888155090980: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.016568]  ffff888155090a00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.017497] >ffff888155090a80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.018438]                                ^
[176806.019007]  ffff888155090b00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.020001]  ffff888155090b80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[176806.020996] ==================================================================

Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Fix fw tracer first block check

While handling new traces, to verify it is not the first block being
written, last_timestamp is checked. But instead of checking it is non
zero it is verified to be zero. Fix to verify last_timestamp is not
zero.

Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Feras Daoud <ferasda@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: XDP, Drop fragmented packets larger than MTU size

XDP transmits fragmented packets that are larger than MTU size instead of
dropping those packets. The drop check that checks whether a packet is larger
than MTU is comparing MTU size against the linear part length only.

Adjust the drop check to compare MTU size against both linear and non-linear
part lengths to avoid transmitting fragmented packets larger than MTU size.

Fixes: 39a1665d16a2 ("net/mlx5e: Implement sending multi buffer XDP frames")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Decrease num_block_tc when unblock tc offload

The cited commit increases num_block_tc when unblock tc offload.
Actually should decrease it.

Fixes: c8e350e62fc5 ("net/mlx5e: Make TC and IPsec offloads mutually exclusive on a netdev")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix overrun reported by coverity

Coverity Scan reports the following issue. But it's impossible that
mlx5_get_dev_index returns 7 for PF, even if the index is calculated
from PCI FUNC ID. So add the checking to make coverity slience.

CID 610894 (#2 of 2): Out-of-bounds write (OVERRUN)
Overrunning array esw->fdb_table.offloads.peer_miss_rules of 4 8-byte
elements at element index 7 (byte offset 63) using index
mlx5_get_dev_index(peer_dev) (which evaluates to 7).

Fixes: 9bee385a6e39 ("net/mlx5: E-switch, refactor FDB miss rule add/remove")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: fix a potential double-free in fs_udp_create_groups

When kcalloc() for ft->g succeeds but kvzalloc() for in fails,
fs_udp_create_groups() will free ft->g. However, its caller
fs_udp_create_table() will free ft->g again through calling
mlx5e_destroy_flow_table(), which will lead to a double-free.
Fix this by setting ft->g to NULL in fs_udp_create_groups().

Fixes: 1c80bd684388 ("net/mlx5e: Introduce Flow Steering UDP API")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix a race in command alloc flow

Fix a cmd->ent use after free due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process allocated a ent->idx but didn't set ent to cmd->ent_arr in
cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into
the spin lock.

[70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core]
[70013.081967] Write of size 4 at addr ffff88880b1510b4 by task kworker/26:1/1433361
[70013.081968]
[70013.082028] Workqueue: events aer_isr
[70013.082053] Call Trace:
[70013.082067]  dump_stack+0x8b/0xbb
[70013.082086]  print_address_description+0x6a/0x270
[70013.082102]  kasan_report+0x179/0x2c0
[70013.082173]  mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core]
[70013.082267]  mlx5_cmd_flush+0x80/0x180 [mlx5_core]
[70013.082304]  mlx5_enter_error_state+0x106/0x1d0 [mlx5_core]
[70013.082338]  mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core]
[70013.082377]  remove_one+0x200/0x2b0 [mlx5_core]
[70013.082409]  pci_device_remove+0xf3/0x280
[70013.082439]  device_release_driver_internal+0x1c3/0x470
[70013.082453]  pci_stop_bus_device+0x109/0x160
[70013.082468]  pci_stop_and_remove_bus_device+0xe/0x20
[70013.082485]  pcie_do_fatal_recovery+0x167/0x550
[70013.082493]  aer_isr+0x7d2/0x960
[70013.082543]  process_one_work+0x65f/0x12d0
[70013.082556]  worker_thread+0x87/0xb50
[70013.082571]  kthread+0x2e9/0x3a0
[70013.082592]  ret_from_fork+0x1f/0x40

The logical relationship of this error is as follows:

             aer_recover_work              |          ent->work
-------------------------------------------+------------------------------
aer_recover_work_func                      |
|- pcie_do_recovery                        |
  |- report_error_detected                 |
    |- mlx5_pci_err_detected               |cmd_work_handler
      |- mlx5_enter_error_state            |  |- cmd_alloc_index
        |- enter_error_state               |    |- lock cmd->alloc_lock
          |- mlx5_cmd_flush                |    |- clear_bit
            |- mlx5_cmd_trigger_completions|    |- unlock cmd->alloc_lock
              |- lock cmd->alloc_lock      |
              |- vector = ~dev->cmd.vars.bitmask
              |- for_each_set_bit          |
                |- cmd_ent_get(cmd->ent_arr[i]) (UAF)
              |- unlock cmd->alloc_lock    |  |- cmd->ent_arr[ent->idx]=ent

The cmd->ent_arr[ent->idx] assignment and the bit clearing are not
protected by the cmd->alloc_lock in cmd_work_handler().

Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()

Out_sz that the size of out buffer is calculated using query_nic_vport
_context_in structure when driver query the MAC list. However query_nic
_vport_context_in structure is smaller than query_nic_vport_context_out.
When allowed_list_size is greater than 96, calling ether_addr_copy() will
trigger an slab-out-of-bounds.

[ 1170.055866] BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x481/0x4d0 [mlx5_core]
[ 1170.055869] Read of size 4 at addr ffff88bdbc57d912 by task kworker/u128:1/461
[ 1170.055870]
[ 1170.055932] Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core]
[ 1170.055936] Call Trace:
[ 1170.055949]  dump_stack+0x8b/0xbb
[ 1170.055958]  print_address_description+0x6a/0x270
[ 1170.055961]  kasan_report+0x179/0x2c0
[ 1170.056061]  mlx5_query_nic_vport_mac_list+0x481/0x4d0 [mlx5_core]
[ 1170.056162]  esw_update_vport_addr_list+0x2c5/0xcd0 [mlx5_core]
[ 1170.056257]  esw_vport_change_handle_locked+0xd08/0x1a20 [mlx5_core]
[ 1170.056377]  esw_vport_change_handler+0x6b/0x90 [mlx5_core]
[ 1170.056381]  process_one_work+0x65f/0x12d0
[ 1170.056383]  worker_thread+0x87/0xb50
[ 1170.056390]  kthread+0x2e9/0x3a0
[ 1170.056394]  ret_from_fork+0x1f/0x40

Fixes: e16aea2744ab ("net/mlx5: Introduce access functions to modify/query vport mac lists")
Cc: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: fix double free of encap_header

Cited commit introduced potential double free since encap_header can be
destroyed twice in some cases - once by error cleanup sequence in
mlx5e_tc_tun_{create|update}_header_ipv{4|6}(), once by generic
mlx5e_encap_put() that user calls as a result of getting an error from
tunnel create|update. At the same time the point where e->encap_header is
assigned can't be delayed because the function can still return non-error
code 0 as a result of checking for NUD_VALID flag, which will cause
neighbor update to dereference NULL encap_header.

Fix the issue by:

- Nulling local encap_header variables in
mlx5e_tc_tun_{create|update}_header_ipv{4|6}() to make kfree(encap_header)
call in error cleanup sequence noop after that point.

- Assigning reformat_params.data from e->encap_header instead of local
variable encap_header that was set to NULL pointer by previous step. Also
assign reformat_params.size from e->encap_size for uniformity and in order
to make the code less error-prone in the future.

Fixes: d589e785baf5 ("net/mlx5e: Allow concurrent creation of encap entries")
Reported-by: Dust Li <dust.li@linux.alibaba.com>
Reported-by: Cruz Zhao <cruzzhao@linux.alibaba.com>
Reported-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Revert "net/mlx5e: fix double free of encap_header"

This reverts commit 6f9b1a0731662648949a1c0587f6acb3b7f8acf1.

This patch is causing a null ptr issue, the proper fix is in the next
patch.

Fixes: 6f9b1a073166 ("net/mlx5e: fix double free of encap_header")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Revert "net/mlx5e: fix double free of encap_header in update funcs"

This reverts commit 3a4aa3cb83563df942be49d145ee3b7ddf17d6bb.

This patch is causing a null ptr issue, the proper fix is in the next
patch.

Fixes: 3a4aa3cb8356 ("net/mlx5e: fix double free of encap_header in update funcs")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

sign-file: Fix incorrect return values check

There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.

Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs

Pull ufs fix from Al Viro:
"ufs got broken this merge window on folio conversion - calling
  conventions for filemap_lock_folio() are not the same as for
  find_lock_page()"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix ufs_get_locked_folio() breakage

Revert "tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set"

This reverts commit f3f32a356c0d2379d4431364e74f101f8f075ce3.

Paolo reports that the change disables autocorking even after
the userspace sets TCP_CORK.

Fixes: f3f32a356c0d ("tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set")
Link: https://lore.kernel.org/r/0d30d5a41d3ac990573016308aaeacb40a9dc79f.camel@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'efi-urgent-for-v6.7-2' of git://git./linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:

- Deal with a regression in the recently refactored x86 EFI stub code
   on older Dell systems by disabling randomization of the physical load
   address

- Use the correct load address for relocatable Loongarch kernels

* tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/x86: Avoid physical KASLR on older Dell systems
  efi/loongarch: Use load address to calculate kernel entry address

i40e: Fix ST code value for Clause 45

ST code value for clause 45 that has been changed by
commit 8196b5fd6c73 ("i40e: Refactor I40E_MDIO_CLAUSE* macros")
is currently wrong.

The mentioned commit refactored ..MDIO_CLAUSE??_STCODE_MASK so
their value is the same for both clauses. The value is correct
for clause 22 but not for clause 45.

Fix the issue by adding a parameter to I40E_GLGEN_MSCA_STCODE_MASK
macro that specifies required value.

Fixes: 8196b5fd6c73 ("i40e: Refactor I40E_MDIO_CLAUSE* macros")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: fix theoretical out-of-bounds access in ethtool link modes

To map phy types reported by the hardware to ethtool link mode bits,
ice uses two lookup tables (phy_type_low_lkup, phy_type_high_lkup).
The "low" table has 64 elements to cover every possible bit the hardware
may report, but the "high" table has only 13. If the hardware reports a
higher bit in phy_types_high, the driver would access memory beyond the
lookup table's end.

Instead of iterating through all 64 bits of phy_types_{low,high}, use
the sizes of the respective lookup tables.

Fixes: 9136e1f1e5c3 ("ice: refactor PHY type to ethtool link mode")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

fix ufs_get_locked_folio() breakage

filemap_lock_folio() returns ERR_PTR(-ENOENT) if the thing is not
in cache - not NULL like find_lock_page() used to.

Fixes: 5fb7bd50b351 "ufs: add ufs_get_locked_folio and ufs_put_locked_folio"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge branch 'stmmac-bug-fixes'

Yanteng Si says:

====================
stmmac: Some bug fixes

* Put Krzysztof's patch into my thread, pick Conor's Reviewed-by
  tag and Jiaxun's Acked-by tag.(prev version is RFC patch)

* I fixed an Oops related to mdio, mainly to ensure that
  mdio is initialized before use, because it will be used
  in a series of patches I am working on.

see <https://lore.kernel.org/loongarch/cover.1699533745.git.siyanteng@loongson.cn/T/#t>
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

MIPS: dts: loongson: drop incorrect dwmac fallback compatible

Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.

Drop useless, incorrect (space in between) and undocumented compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: dwmac-loongson: drop useless check for compatible fallback

Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.

Drop useless, incorrect (space in between) and undocumented compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: dwmac-loongson: Make sure MDIO is initialized before use

Generic code will use mdio. If it is not initialized before use,
the kernel will Oops.

Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set

Based on the tcp man page, if TCP_NODELAY is set, it disables Nagle's algorithm
and packets are sent as soon as possible. However in the `tcp_push` function
where autocorking is evaluated the `nonagle` value set by TCP_NODELAY is not
considered which can trigger unexpected corking of packets and induce delays.

For example, if two packets are generated as part of a server's reply, if the
first one is not transmitted on the wire quickly enough, the second packet can
trigger the autocorking in `tcp_push` and be delayed instead of sent as soon as
possible. It will either wait for additional packets to be coalesced or an ACK
from the client before transmitting the corked packet. This can interact badly
if the receiver has tcp delayed acks enabled, introducing 40ms extra delay in
completion times. It is not always possible to control who has delayed acks
set, but it is possible to adjust when and how autocorking is triggered.
Patch prevents autocorking if the TCP_NODELAY flag is set on the socket.

Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu 22.04 and
Apache Tomcat 9.0.83 running the basic servlet below:

import java.io.IOException;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;

public class HelloWorldServlet extends HttpServlet {
    @Override
    protected void doGet(HttpServletRequest request, HttpServletResponse response)
      throws ServletException, IOException {
        response.setContentType("text/html;charset=utf-8");
        OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8");
        String s = "a".repeat(3096);
        osw.write(s,0,s.length());
        osw.flush();
    }
}

Load was applied using  wrk2 (https://github.com/kinvolk/wrk2) from an AWS
c6i.8xlarge instance.  With the current auto-corking behavior and TCP_NODELAY
set an additional 40ms latency from P99.99+ values are observed.  With the
patch applied we see no occurrences of 40ms latencies. The patch has also been
tested with iperf and uperf benchmarks and no regression was observed.

# No patch with tcp_autocorking=1 and TCP_NODELAY set on all sockets
./wrk -t32 -c128 -d40s --latency -R10000  http://172.31.49.177:8080/hello/hello'
  ...
50.000%    0.91ms
75.000%    1.12ms
90.000%    1.46ms
99.000%    1.73ms
99.900%    1.96ms
99.990%   43.62ms   <<< 40+ ms extra latency
99.999%   48.32ms
100.000%   49.34ms

# With patch
./wrk -t32 -c128 -d40s --latency -R10000  http://172.31.49.177:8080/hello/hello'
  ...
50.000%    0.89ms
75.000%    1.13ms
90.000%    1.44ms
99.000%    1.67ms
99.900%    1.78ms
99.990%    2.27ms   <<< no 40+ ms extra latency
99.999%    3.71ms
100.000%    4.57ms

Fixes: f54b311142a9 ("tcp: auto corking")
Signed-off-by: Salvatore Dipietro <dipiets@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'hid-for-linus-2023121201' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

- Lenovo ThinkPad TrackPoint Keyboard II firmware-specific regression
   fix (Mikhail Khvainitski)

- device-specific fixes (various authors)

* tag 'hid-for-linus-2023121201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: apple: Add "hfd.cn" and "WKB603" to the list of non-apple keyboards
  HID: lenovo: Restrict detection of patched firmware only to USB cptkbd
  HID: Add quirk for Labtec/ODDOR/aikeec handbrake
  HID: i2c-hid: Add IDEA5002 to i2c_hid_acpi_blacklist[]
  mailmap: add address mapping for Jiri Kosina

dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set()

User may not pass DPLL_A_PIN_STATE attribute in the pin set operation
message. Sanitize that by checking if the attr pointer is not null
and process the passed state attribute value only in that case.

Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20231211083758.1082853-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'ena-driver-xdp-bug-fixes'

David Arinzon says:

====================
ENA driver XDP bug fixes

This patchset contains multiple XDP-related bug fixes
in the ENA driver.
====================

Link: https://lore.kernel.org/r/20231211062801.27891-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ena: Fix XDP redirection error

When sending TX packets, the meta descriptor can be all zeroes
as no meta information is required (as in XDP).

This patch removes the validity check, as when
`disable_meta_caching` is enabled, such TX packets will be
dropped otherwise.

Fixes: 0e3a3f6dacf0 ("net: ena: support new LLQ acceleration mode")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-5-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ena: Fix DMA syncing in XDP path when SWIOTLB is on

This patch fixes two issues:

Issue 1
-------
Description
```````````
Current code does not call dma_sync_single_for_cpu() to sync data from
the device side memory to the CPU side memory before the XDP code path
uses the CPU side data.
This causes the XDP code path to read the unset garbage data in the CPU
side memory, resulting in incorrect handling of the packet by XDP.

Solution
````````
1. Add a call to dma_sync_single_for_cpu() before the XDP code starts to
   use the data in the CPU side memory.
2. The XDP code verdict can be XDP_PASS, in which case there is a
   fallback to the non-XDP code, which also calls
   dma_sync_single_for_cpu().
   To avoid calling dma_sync_single_for_cpu() twice:
2.1. Put the dma_sync_single_for_cpu() in the code in such a place where
     it happens before XDP and non-XDP code.
2.2. Remove the calls to dma_sync_single_for_cpu() in the non-XDP code
     for the first buffer only (rx_copybreak and non-rx_copybreak
     cases), since the new call that was added covers these cases.
     The call to dma_sync_single_for_cpu() for the second buffer and on
     stays because only the first buffer is handled by the newly added
     dma_sync_single_for_cpu(). And there is no need for special
     handling of the second buffer and on for the XDP path since
     currently the driver supports only single buffer packets.

Issue 2
-------
Description
```````````
In case the XDP code forwarded the packet (ENA_XDP_FORWARDED),
ena_unmap_rx_buff_attrs() is called with attrs set to 0.
This means that before unmapping the buffer, the internal function
dma_unmap_page_attrs() will also call dma_sync_single_for_cpu() on
the whole buffer (not only on the data part of it).
This sync is both wasteful (since a sync was already explicitly
called before) and also causes a bug, which will be explained
using the below diagram.

The following diagram shows the flow of events causing the bug.
The order of events is (1)-(4) as shown in the diagram.

CPU side memory area

     (3)convert_to_xdp_frame() initializes the
        headroom with xdpf metadata
                      ||
                      \/
          ___________________________________
         |                                   |
0       |                                   V                       4K
---------------------------------------------------------------------
| xdpf->data      | other xdpf       |   < data >   | tailroom ||...|
|                 | fields           |              | GARBAGE  ||   |
---------------------------------------------------------------------

                   /\                        /\
                   ||                        ||
   (4)ena_unmap_rx_buff_attrs() calls     (2)dma_sync_single_for_cpu()
      dma_sync_single_for_cpu() on the       copies data from device
      whole buffer page, overwriting         side to CPU side memory
      the xdpf->data with GARBAGE.           ||
0                                                                   4K
---------------------------------------------------------------------
| headroom                           |   < data >   | tailroom ||...|
| GARBAGE                            |              | GARBAGE  ||   |
---------------------------------------------------------------------

Device side memory area                      /\
                                             ||
                               (1) device writes RX packet data

After the call to ena_unmap_rx_buff_attrs() in (4), the xdpf->data
becomes corrupted, and so when it is later accessed in
ena_clean_xdp_irq()->xdp_return_frame(), it causes a page fault,
crashing the kernel.

Solution
````````
Explicitly tell ena_unmap_rx_buff_attrs() not to call
dma_sync_single_for_cpu() by passing it the ENA_DMA_ATTR_SKIP_CPU_SYNC
flag.

Fixes: f7d625adeb7b ("net: ena: Add dynamic recycling mechanism for rx buffers")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-4-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ena: Fix xdp drops handling due to multibuf packets

Current xdp code drops packets larger than ENA_XDP_MAX_MTU.
This is an incorrect condition since the problem is not the
size of the packet, rather the number of buffers it contains.

This commit:

1. Identifies and drops XDP multi-buffer packets at the
beginning of the function.
2. Increases the xdp drop statistic when this drop occurs.
3. Adds a one-time print that such drops are happening to
give better indication to the user.

Fixes: 838c93dc5449 ("net: ena: implement XDP drop support")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-3-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ena: Destroy correct number of xdp queues upon failure

The ena_setup_and_create_all_xdp_queues() function freed all the
resources upon failure, after creating only xdp_num_queues queues,
instead of freeing just the created ones.

In this patch, the only resources that are freed, are the ones
allocated right before the failure occurs.

Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shahar Itzko <itzko@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: Remove acked SYN flag from packet in the transmit queue correctly

syzkaller report:

kernel BUG at net/core/skbuff.c:3452!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty #135
RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452)
Call Trace:
icmp_glue_bits (net/ipv4/icmp.c:357)
__ip_append_data.isra.0 (net/ipv4/ip_output.c:1165)
ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341)
icmp_push_reply (net/ipv4/icmp.c:370)
__icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772)
ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577)
__ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295)
ip_output (net/ipv4/ip_output.c:427)
__ip_queue_xmit (net/ipv4/ip_output.c:535)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
__tcp_retransmit_skb (net/ipv4/tcp_output.c:3387)
tcp_retransmit_skb (net/ipv4/tcp_output.c:3404)
tcp_retransmit_timer (net/ipv4/tcp_timer.c:604)
tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716)

The panic issue was trigered by tcp simultaneous initiation.
The initiation process is as follows:

      TCP A                                            TCP B

  1.  CLOSED                                           CLOSED

  2.  SYN-SENT     --> <SEQ=100><CTL=SYN>              ...

  3.  SYN-RECEIVED <-- <SEQ=300><CTL=SYN>              <-- SYN-SENT

  4.               ... <SEQ=100><CTL=SYN>              --> SYN-RECEIVED

  5.  SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ...

  // TCP B: not send challenge ack for ack limit or packet loss
  // TCP A: close
tcp_close
   tcp_send_fin
              if (!tskb && tcp_under_memory_pressure(sk))
                  tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet
           TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN;  // set FIN flag

  6.  FIN_WAIT_1  --> <SEQ=100><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ...

  // TCP B: send challenge ack to SYN_FIN_ACK

  7.               ... <SEQ=301><ACK=101><CTL=ACK>   <-- SYN-RECEIVED //challenge ack

  // TCP A:  <SND.UNA=101>

  8.  FIN_WAIT_1 --> <SEQ=101><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // retransmit panic

__tcp_retransmit_skb  //skb->len=0
    tcp_trim_head
len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100
    __pskb_trim_head
skb->data_len -= len // skb->len=-1, wrap around
    ... ...
    ip_fragment
icmp_glue_bits //BUG_ON

If we use tcp_trim_head() to remove acked SYN from packet that contains data
or other flags, skb->len will be incorrectly decremented. We can remove SYN
flag that has been acked from rtx_queue earlier than tcp_trim_head(), which
can fix the problem mentioned above.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

qed: Fix a potential use-after-free in qed_cxt_tables_alloc

qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to
free p_hwfn->p_cxt_mngr->ilt_shadow on error. However,
qed_cxt_tables_alloc() accesses the freed pointer on failure
of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(),
which may lead to use-after-free. Fix this issue by setting
p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free().

Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'ext4_for_linus-6.7-rc6' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
"Fix various bugs / regressions for ext4, including a soft lockup, a
  WARN_ON, and a BUG"

* tag 'ext4_for_linus-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: fix soft lockup in journal_finish_inode_data_buffers()
  ext4: fix warning in ext4_dio_write_end_io()
  jbd2: increase the journal IO's priority
  jbd2: correct the printing of write_flags in jbd2_write_superblock()
  ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS

iavf: Fix iavf_shutdown to call iavf_remove instead iavf_close

Make the flow for pci shutdown be the same to the pci remove.

iavf_shutdown was implementing an incomplete version
of iavf_remove. It misses several calls to the kernel like
iavf_free_misc_irq, iavf_reset_interrupt_capability, iounmap
that might break the system on reboot or hibernation.

Implement the call of iavf_remove directly in iavf_shutdown to
close this gap.

Fixes below error messages (dmesg) during shutdown stress tests -
[685814.900917] ice 0000:88:00.0: MAC 02:d0:5f:82:43:5d does not exist for
VF 0
[685814.900928] ice 0000:88:00.0: MAC 33:33:00:00:00:01 does not exist for
VF 0

Reproduction:

1. Create one VF interface:
echo 1 > /sys/class/net/<interface_name>/device/sriov_numvfs

2. Run live dmesg on the host:
dmesg -wH

3. On SUT, script below steps into vf_namespace_assignment.sh

<#!/bin/sh> // Remove <>. Git removes # line
if=<VF name> (edit this per VF name)
loop=0

while true; do

echo test round $loop
let loop++

ip netns add ns$loop
ip link set dev $if up
ip link set dev $if netns ns$loop
ip netns exec ns$loop ip link set dev $if up
ip netns exec ns$loop ip link set dev $if netns 1
ip netns delete ns$loop

done

4. Run the script for at least 1000 iterations on SUT:
./vf_namespace_assignment.sh

Expected result:
No errors in dmesg.

Fixes: 129cf89e5856 ("iavf: rename functions and structs to new name")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Ranganatha Rao <ranganatha.rao@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

iavf: Handle ntuple on/off based on new state machines for flow director

ntuple-filter feature on/off:
Default is on. If turned off, the filters will be removed from both
PF and iavf list. The removal is irrespective of current filter state.

Steps to reproduce:
-------------------

1. Ensure ntuple is on.

ethtool -K enp8s0 ntuple-filters on

2. Create a filter to receive the traffic into non-default rx-queue like 15
and ensure traffic is flowing into queue into 15.
Now, turn off ntuple. Traffic should not flow to configured queue 15.
It should flow to default RX queue.

Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

iavf: Introduce new state machines for flow director

New states introduced:

IAVF_FDIR_FLTR_DIS_REQUEST
IAVF_FDIR_FLTR_DIS_PENDING
IAVF_FDIR_FLTR_INACTIVE

Current FDIR state machines (SM) are not adequate to handle a few
scenarios in the link DOWN/UP event, reset event and ntuple-feature.

For example, when VF link goes DOWN and comes back UP administratively,
the expectation is that previously installed filters should also be
restored. But with current SM, filters are not restored.
So with new SM, during link DOWN filters are marked as INACTIVE in
the iavf list but removed from PF. After link UP, SM will transition
from INACTIVE to ADD_REQUEST to restore the filter.

Similarly, with VF reset, filters will be removed from the PF, but
marked as INACTIVE in the iavf list. Filters will be restored after
reset completion.

Steps to reproduce:
-------------------

1. Create a VF. Here VF is enp8s0.

2. Assign IP addresses to VF and link partner and ping continuously
from remote. Here remote IP is 1.1.1.1.

3. Check default RX Queue of traffic.

ethtool -S enp8s0 | grep -E "rx-[[:digit:]]+\.packets"

4. Add filter - change default RX Queue (to 15 here)

ethtool -U ens8s0 flow-type ip4 src-ip 1.1.1.1 action 15 loc 5

5. Ensure filter gets added and traffic is received on RX queue 15 now.

Link event testing:
-------------------
6. Bring VF link down and up. If traffic flows to configured queue 15,
test is success, otherwise it is a failure.

Reset event testing:
--------------------
7. Reset the VF. If traffic flows to configured queue 15, test is success,
otherwise it is a failure.

Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Merge tag 'fuse-fixes-6.7-rc6' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse fixes from Miklos Szeredi:

- Fix a couple of potential crashes, one introduced in 6.6 and one
   in 5.10

- Fix misbehavior of virtiofs submounts on memory pressure

- Clarify naming in the uAPI for a recent feature

* tag 'fuse-fixes-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: disable FOPEN_PARALLEL_DIRECT_WRITES with FUSE_DIRECT_IO_ALLOW_MMAP
  fuse: dax: set fc->dax to NULL in fuse_dax_conn_free()
  fuse: share lookup state between submount and its parent
  docs/fuse-io: Document the usage of DIRECT_IO_ALLOW_MMAP
  fuse: Rename DIRECT_IO_RELAX to DIRECT_IO_ALLOW_MMAP

Merge tag '6.7-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd

Pull smb server fixes from Steve French:

- Memory leak fix (in lock error path)

- Two fixes for create with allocation size

- FIx for potential UAF in lease break error path

- Five directory lease (caching) fixes found during additional recent
   testing

* tag '6.7-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix wrong name of SMB2_CREATE_ALLOCATION_SIZE
  ksmbd: fix wrong allocation size update in smb2_open()
  ksmbd: avoid duplicate opinfo_put() call on error of smb21_lease_break_ack()
  ksmbd: lazy v2 lease break on smb2_write()
  ksmbd: send v2 lease break notification for directory
  ksmbd: downgrade RWH lease caching state to RH for directory
  ksmbd: set v2 lease capability
  ksmbd: set epoch in create context v2 lease
  ksmbd: fix memory leak in smb2_lock()

jbd2: fix soft lockup in journal_finish_inode_data_buffers()

There's issue when do io test:
WARN: soft lockup - CPU#45 stuck for 11s! [jbd2/dm-2-8:4170]
CPU: 45 PID: 4170 Comm: jbd2/dm-2-8 Kdump: loaded Tainted: G  OE
Call trace:
dump_backtrace+0x0/0x1a0
show_stack+0x24/0x30
dump_stack+0xb0/0x100
watchdog_timer_fn+0x254/0x3f8
__hrtimer_run_queues+0x11c/0x380
hrtimer_interrupt+0xfc/0x2f8
arch_timer_handler_phys+0x38/0x58
handle_percpu_devid_irq+0x90/0x248
generic_handle_irq+0x3c/0x58
__handle_domain_irq+0x68/0xc0
gic_handle_irq+0x90/0x320
el1_irq+0xcc/0x180
queued_spin_lock_slowpath+0x1d8/0x320
jbd2_journal_commit_transaction+0x10f4/0x1c78 [jbd2]
kjournald2+0xec/0x2f0 [jbd2]
kthread+0x134/0x138
ret_from_fork+0x10/0x18

Analyzed informations from vmcore as follows:
(1) There are about 5k+ jbd2_inode in 'commit_transaction->t_inode_list';
(2) Now is processing the 855th jbd2_inode;
(3) JBD2 task has TIF_NEED_RESCHED flag;
(4) There's no pags in address_space around the 855th jbd2_inode;
(5) There are some process is doing drop caches;
(6) Mounted with 'nodioread_nolock' option;
(7) 128 CPUs;

According to informations from vmcore we know 'journal->j_list_lock' spin lock
competition is fierce. So journal_finish_inode_data_buffers() maybe process
slowly. Theoretically, there is scheduling point in the filemap_fdatawait_range_keep_errors().
However, if inode's address_space has no pages which taged with PAGECACHE_TAG_WRITEBACK,
will not call cond_resched(). So may lead to soft lockup.
journal_finish_inode_data_buffers
  filemap_fdatawait_range_keep_errors
    __filemap_fdatawait_range
      while (index <= end)
        nr_pages = pagevec_lookup_range_tag(&pvec, mapping, &index, end, PAGECACHE_TAG_WRITEBACK);
        if (!nr_pages)
           break;    --> If 'nr_pages' is equal zero will break, then will not call cond_resched()
        for (i = 0; i < nr_pages; i++)
          wait_on_page_writeback(page);
        cond_resched();

To solve above issue, add scheduling point in the journal_finish_inode_data_buffers();

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231211112544.3879780-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

wifi: mt76: fix crash with WED rx support enabled

If WED rx is enabled, rx buffers are added to a buffer pool that can be
filled from multiple page pools. Because buffers freed from rx poll are
not guaranteed to belong to the processed queue's page pool, lockless
caching must not be used in this case.

Cc: stable@vger.kernel.org
Fixes: 2f5c3c77fc9b ("wifi: mt76: switch to page_pool allocator")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231208075004.69843-1-nbd@nbd.name

HID: apple: Add "hfd.cn" and "WKB603" to the list of non-apple keyboards

JingZao(京造) WKB603 keyboard is a rebranded product of Jamesdonkey RS2
keyboard, identified as "hfd.cn WKB603" in wired mode, "WKB603" in bluetooth
mode. Adding them to the list of non-apple keyboards fixes function key.

Signed-off-by: Yan Jun <jerrysteve1101@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

HID: lenovo: Restrict detection of patched firmware only to USB cptkbd

Commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and
stop applying workaround") introduced a regression for ThinkPad
TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses
the same workarounds) but slightly different so that there are
false-positives during detecting well-behaving firmware. This commit
restricts detecting well-behaving firmware to the only model which
known to have one and have stable enough quirks to not cause
false-positives.

Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/
Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Tested-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

net/rose: Fix Use-After-Free in rose_ioctl

Because rose_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with rose_accept().
A use-after-free for skb occurs with the following flow.
```
rose_ioctl() -> skb_peek()
rose_accept() -> skb_dequeue() -> kfree_skb()
```
Add sk->sk_receive_queue.lock to rose_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209100538.GA407321@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

atm: Fix Use-After-Free in do_vcc_ioctl

Because do_vcc_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with vcc_recvmsg().
A use-after-free for skb occurs with the following flow.
```
do_vcc_ioctl() -> skb_peek()
vcc_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to do_vcc_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209094210.GA403126@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

wifi: iwlwifi: pcie: avoid a NULL pointer dereference

It possible that while the rx rb is being handled, the transport has
been stopped and re-started. In this case the tx queue pointer is not
yet initialized, which will lead to a NULL pointer dereference.
Fix it.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.cd0898cafd89.I0b84daae753ba9612092bf383f5c6f761446e964@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: mesh_plink: fix matches_local logic

During refactoring the "else" here got lost, add it back.

Fixes: c99a89edb106 ("mac80211: factor out plink event gathering")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.795480fa0e0b.I017d501196a5bbdcd9afd33338d342d6fe1edd79@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: mesh: check element parsing succeeded

ieee802_11_parse_elems() can return NULL, so we must
check for the return value.

Fixes: 5d24828d05f3 ("mac80211: always allocate struct ieee802_11_elems")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.93dea364f3d3.Ie87781c6c48979fb25a744b90af4a33dc2d83a28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: check defragmentation succeeded

We need to check that cfg80211_defragment_element()
didn't return an error, since it can fail due to bad
input, and we didn't catch that before.

Fixes: 8eb8dd2ffbbb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.8595a6b67fc0.I1225edd8f98355e007f96502e358e476c7971d8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: don't re-add debugfs during reconfig

If we're doing reconfig, then we cannot add the debugfs
files that are already there from before the reconfig.
Skip that in drv_change_sta_links() during reconfig.

Fixes: d2caad527c19 ("wifi: mac80211: add API to show the link STAs in debugfs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.88a950f43e16.Id71181780994649219685887c0fcad33d387cc78@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net: rfkill: gpio: set GPIO direction

Fix the undefined usage of the GPIO consumer API after retrieving the
GPIO description with GPIO_ASIS. The API documentation mentions that
GPIO_ASIS won't set a GPIO direction and requires the user to set a
direction before using the GPIO.

This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer
able to enabled/disable a device, presumably because the GPIO controller
was never configured for the output direction.

Fixes: b2f750c3a80b ("net: rfkill: gpio: prevent value glitch during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: check if the existing link config remains unchanged

[Syz report]
WARNING: CPU: 1 PID: 5067 at net/mac80211/rate.c:48 rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48
Modules linked in:
CPU: 1 PID: 5067 Comm: syz-executor413 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48
Code: 48 c7 c2 00 46 0c 8c be 08 03 00 00 48 c7 c7 c0 45 0c 8c c6 05 70 79 0b 05 01 e8 1b a0 6f f7 e9 e0 fd ff ff e8 61 b3 8f f7 90 <0f> 0b 90 e9 36 ff ff ff e8 53 b3 8f f7 e8 5e 0b 78 f7 31 ff 89 c3
RSP: 0018:ffffc90003c57248 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888016bc4000 RCX: ffffffff89f7d519
RDX: ffff888076d43b80 RSI: ffffffff89f7d6df RDI: 0000000000000005
RBP: ffff88801daaae20 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000001
R13: 0000000000000000 R14: ffff888020030e20 R15: ffff888078f08000
FS: 0000555556b94380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005fdeb8 CR3: 0000000076d22000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sta_apply_auth_flags.constprop.0+0x4b7/0x510 net/mac80211/cfg.c:1674
sta_apply_parameters+0xaf1/0x16c0 net/mac80211/cfg.c:2002
ieee80211_add_station+0x3fa/0x6c0 net/mac80211/cfg.c:2068
rdev_add_station net/wireless/rdev-ops.h:201 [inline]
nl80211_new_station+0x13ba/0x1a70 net/wireless/nl80211.c:7603
genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

[Analysis]
It is inappropriate to make a link configuration change judgment on an
non-existent and non new link.

[Fix]
Quickly exit when there is a existent link and the link configuration has not
changed.

Fixes: b303835dabe0 ("wifi: mac80211: accept STA changes without link changes")
Reported-and-tested-by: syzbot+62d7eef57b09bfebcd84@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://msgid.link/tencent_DE67FF86DB92ED465489A36ECD2EDDCC8C06@qq.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: Add my certificate

As announced [1][2], I have taken over maintainership of the
wireless-regdb project.

Add my certificate so that newer releases are valid to the kernel.
Seth's certificate should be kept around for awhile, at least until
a few new releases by me happen.

This should also be applied to stable trees so that stable kernels
can utilize newly released database binaries.

[1] https://lore.kernel.org/linux-wireless/CAGb2v657baNMPKU3QADijx7hZa=GUcSv2LEDdn6N=QQaFX8r-g@mail.gmail.com/
[2] https://lore.kernel.org/linux-wireless/ZWmRR5ul7EDfxCan@wens.tw/

Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Seth Forshee <sforshee@kernel.org>
Link: https://msgid.link/ZXHGsqs34qZyzZng@wens.tw
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: pcie: add another missing bh-disable for rxq->lock

Evidently I had only looked at all the ones in rx.c, and missed this.
Add bh-disable to this use of the rxq->lock as well.

Fixes: 25edc8f259c7 ("iwlwifi: pcie: properly implement NAPI")
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231208183100.e79ad3dae649.I8f19713c4383707f8be7fc20ff5cc1ecf12429bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: don't require protected vendor action frames

For vendor action frames, whether a protected one should be
used or not is clearly up to the individual vendor and frame,
so even though a protected dual is defined, it may not get
used. Thus, don't require protection for vendor action frames
when they're used in a connection.

Since we obviously don't process frames unknown to the kernel
in the kernel, it may makes sense to invert this list to have
all the ones the kernel processes and knows to be requiring
protection, but that'd be a different change.

Fixes: 91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames")
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://msgid.link/20231206223801.f6a2cf4e67ec.Ifa6acc774bd67801d3dafb405278f297683187aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge tag 'bcachefs-2023-12-10' of https://evilpiepirate.org/git/bcachefs

Pull more bcachefs bugfixes from Kent Overstreet:

- Fix a rare emergency shutdown path bug: dropping journal pins after
   the filesystem has mostly been torn down is not what we want.

- Fix some concurrency issues with the btree write buffer and journal
   replay by not using the btree write buffer until journal replay is
   finished

- A fixup from the prior patch to kill journal pre-reservations: at the
   start of the btree update path, where previously we took a
   pre-reservation, we do at least want to check the journal watermark.

- Fix a race between dropping device metadata and btree node writes,
   which would re-add a pointer to a device that had just been dropped

- Fix one of the SCRU lock warnings, in
   bch2_compression_stats_to_text().

- Partial fix for a rare transaction paths overflow, when indirect
   extents had been split by background tasks, by not running certain
   triggers when they're not needed.

- Fix for creating a snapshot with implicit source in a subdirectory of
   the containing subvolume

- Don't unfreeze when we're emergency read-only

- Fix for rebalance spinning trying to compress unwritten extentns

- Another deleted_inodes fix, for directories

- Fix a rare deadlock (usually just an unecessary wait) when flushing
   the journal with an open journal entry.

* tag 'bcachefs-2023-12-10' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Close journal entry if necessary when flushing all pins
  bcachefs: Fix uninitialized var in bch2_journal_replay()
  bcachefs: Fix deleted inode check for dirs
  bcachefs: rebalance shouldn't attempt to compress unwritten extents
  bcachefs: don't attempt rw on unfreeze when shutdown
  bcachefs: Fix creating snapshot with implict source
  bcachefs: Don't run indirect extent trigger unless inserting/deleting
  bcachefs: Convert compression_stats to for_each_btree_key2
  bcachefs: Fix bch2_extent_drop_ptrs() call
  bcachefs: Fix a journal deadlock in replay
  bcachefs; Don't use btree write buffer until journal replay is finished
  bcachefs: Don't drop journal pins in exit path

afs: Fix refcount underflow from error handling race

If an AFS cell that has an unreachable (eg. ENETUNREACH) server listed (VL
server or fileserver), an asynchronous probe to one of its addresses may
fail immediately because sendmsg() returns an error.  When this happens, a
refcount underflow can happen if certain events hit a very small window.

The way this occurs is:

(1) There are two levels of "call" object, the afs_call and the
     rxrpc_call.  Each of them can be transitioned to a "completed" state
     in the event of success or failure.

(2) Asynchronous afs_calls are self-referential whilst they are active to
     prevent them from evaporating when they're not being processed.  This
     reference is disposed of when the afs_call is completed.

     Note that an afs_call may only be completed once; once completed
     completing it again will do nothing.

(3) When a call transmission is made, the app-side rxrpc code queues a Tx
     buffer for the rxrpc I/O thread to transmit.  The I/O thread invokes
     sendmsg() to transmit it - and in the case of failure, it transitions
     the rxrpc_call to the completed state.

(4) When an rxrpc_call is completed, the app layer is notified.  In this
     case, the app is kafs and it schedules a work item to process events
     pertaining to an afs_call.

(5) When the afs_call event processor is run, it goes down through the
     RPC-specific handler to afs_extract_data() to retrieve data from rxrpc
     - and, in this case, it picks up the error from the rxrpc_call and
     returns it.

     The error is then propagated to the afs_call and that is completed
     too.  At this point the self-reference is released.

(6) If the rxrpc I/O thread manages to complete the rxrpc_call within the
     window between rxrpc_send_data() queuing the request packet and
     checking for call completion on the way out, then
     rxrpc_kernel_send_data() will return the error from sendmsg() to the
     app.

(7) Then afs_make_call() will see an error and will jump to the error
     handling path which will attempt to clean up the afs_call.

(8) The problem comes when the error handling path in afs_make_call()
     tries to unconditionally drop an async afs_call's self-reference.
     This self-reference, however, may already have been dropped by
     afs_extract_data() completing the afs_call

(9) The refcount underflows when we return to afs_do_probe_vlserver() and
     that tries to drop its reference on the afs_call.

Fix this by making afs_make_call() attempt to complete the afs_call rather
than unconditionally putting it.  That way, if afs_extract_data() manages
to complete the call first, afs_make_call() won't do anything.

The bug can be forced by making do_udp_sendmsg() return -ENETUNREACH and
sticking an msleep() in rxrpc_send_data() after the 'success:' label to
widen the race window.

The error message looks something like:

    refcount_t: underflow; use-after-free.
    WARNING: CPU: 3 PID: 720 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
    ...
    RIP: 0010:refcount_warn_saturate+0xba/0x110
    ...
    afs_put_call+0x1dc/0x1f0 [kafs]
    afs_fs_get_capabilities+0x8b/0xe0 [kafs]
    afs_fs_probe_fileserver+0x188/0x1e0 [kafs]
    afs_lookup_server+0x3bf/0x3f0 [kafs]
    afs_alloc_server_list+0x130/0x2e0 [kafs]
    afs_create_volume+0x162/0x400 [kafs]
    afs_get_tree+0x266/0x410 [kafs]
    vfs_get_tree+0x25/0xc0
    fc_mount+0xe/0x40
    afs_d_automount+0x1b3/0x390 [kafs]
    __traverse_mounts+0x8f/0x210
    step_into+0x340/0x760
    path_openat+0x13a/0x1260
    do_filp_open+0xaf/0x160
    do_sys_openat2+0xaf/0x170

or something like:

    refcount_t: underflow; use-after-free.
    ...
    RIP: 0010:refcount_warn_saturate+0x99/0xda
    ...
    afs_put_call+0x4a/0x175
    afs_send_vl_probes+0x108/0x172
    afs_select_vlserver+0xd6/0x311
    afs_do_cell_detect_alias+0x5e/0x1e9
    afs_cell_detect_alias+0x44/0x92
    afs_validate_fc+0x9d/0x134
    afs_get_tree+0x20/0x2e6
    vfs_get_tree+0x1d/0xc9
    fc_mount+0xe/0x33
    afs_d_automount+0x48/0x9d
    __traverse_mounts+0xe0/0x166
    step_into+0x140/0x274
    open_last_lookups+0x1c1/0x1df
    path_openat+0x138/0x1c3
    do_filp_open+0x55/0xb4
    do_sys_openat2+0x6c/0xb6

Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting")
Reported-by: Bill MacAllister <bill@ca-zephyr.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1052304
Suggested-by: Jeffrey E Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/2633992.1702073229@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

efi/x86: Avoid physical KASLR on older Dell systems

River reports boot hangs with v6.6 and v6.7, and the bisect points to
commit

a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")

which moves the memory allocation and kernel decompression from the
legacy decompressor (which executes *after* ExitBootServices()) to the
EFI stub, using boot services for allocating the memory. The memory
allocation succeeds but the subsequent call to decompress_kernel() never
returns, resulting in a failed boot and a hanging system.

As it turns out, this issue only occurs when physical address
randomization (KASLR) is enabled, and given that this is a feature we
can live without (virtual KASLR is much more important), let's disable
the physical part of KASLR when booting on AMI UEFI firmware claiming to
implement revision v2.0 of the specification (which was released in
2006), as this is the version these systems advertise.

Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218173
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

octeontx2-af: Fix pause frame configuration

The current implementation's default Pause Forward setting is causing
unnecessary network traffic. This patch disables Pause Forward to
address this issue.

Fixes: 1121f6b02e7a ("octeontx2-af: Priority flow control configuration support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>