Linus Torvalds [Fri, 27 Jun 2025 15:55:57 +0000 (08:55 -0700)]
Merge tag 'io_uring-6.16-
20250626' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Two tweaks for a recent fix: fixing a memory leak if multiple iovecs
were initially mapped but only the first was used and hence turned
into a UBUF rathan than an IOVEC iterator, and catching a case where
a retry would be done even if the previous segment wasn't full
- Small series fixing an issue making the vm unhappy if debugging is
turned on, hitting a VM_BUG_ON_PAGE()
- Fix a resource leak in io_import_dmabuf() in the error handling case,
which is a regression in this merge window
- Mark fallocate as needing to be write serialized, as is already done
for truncate and buffered writes
* tag 'io_uring-6.16-
20250626' of git://git.kernel.dk/linux:
io_uring/kbuf: flag partial buffer mappings
io_uring/net: mark iov as dynamically allocated even for single segments
io_uring: fix resource leak in io_import_dmabuf()
io_uring: don't assume uaddr alignment in io_vec_fill_bvec
io_uring/rsrc: don't rely on user vaddr alignment
io_uring/rsrc: fix folio unpinning
io_uring: make fallocate be hashed work
Linus Torvalds [Fri, 27 Jun 2025 15:30:37 +0000 (08:30 -0700)]
Merge tag 'ata-6.16-rc4' of git://git./linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Use the correct DMI identifier for ASUSPRO-D840SA LPM quirk such that
the quirk actually gets applied (me)
* tag 'ata-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Use correct DMI identifier for ASUSPRO-D840SA LPM quirk
Linus Torvalds [Fri, 27 Jun 2025 15:26:25 +0000 (08:26 -0700)]
Merge tag 's390-6.16-3' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix incorrectly dropped dereferencing of the stack nth entry
introduced with a previous KASAN false positive fix
- Use a proper memdup_array_user() helper to prevent overflow in a
protected key size calculation
* tag 's390-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ptrace: Fix pointer dereferencing in regs_get_kernel_stack_nth()
s390/pkey: Prevent overflow in size calculation for memdup_user()
Linus Torvalds [Fri, 27 Jun 2025 15:21:05 +0000 (08:21 -0700)]
Merge tag 'sound-6.16-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes again:
- A regression fix for hibernation bug in ASoC SoundWire
- Fixes for the new Qualcomm USB offload stuff
- A potential OOB access fix in USB-audio
- A potential memleadk fix in ASoC Intel
- Quirks for HD-audio and ASoC AMD ACP"
* tag 'sound-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix built-in mic on ASUS VivoBook X507UAR
ALSA: usb: qcom: fix NULL pointer dereference in qmi_stop_session
ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak.
ASoC: rt721-sdca: fix boost gain calculation error
ALSA: qc_audio_offload: Fix missing error code in prepare_qmi_response()
ALSA: hda/realtek: Add mic-mute LED setup for ASUS UM5606
ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3()
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 6 G1a
ASoC: amd: ps: fix for soundwire failures during hibernation exit sequence
ASoC: amd: yc: Add DMI quirk for Lenovo IdeaPad Slim 5 15
ASoC: amd: yc: add quirk for Acer Nitro ANV15-41 internal mic
ASoC: qcom: sm8250: Fix possibly undefined reference
ALSA: hda/realtek - Enable mute LED on HP Pavilion Laptop 15-eg100
ALSA: hda/realtek: Add quirks for some Clevo laptops
Linus Torvalds [Fri, 27 Jun 2025 05:05:24 +0000 (22:05 -0700)]
Merge tag 'v6.16-p6' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a regression where wp512 can no longer be used with hmac"
* tag 'v6.16-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: wp512 - Use API partial block handling
Linus Torvalds [Fri, 27 Jun 2025 02:49:12 +0000 (19:49 -0700)]
Merge tag 'bcachefs-2025-06-26' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- Lots of small check/repair fixes, primarily in subvol loop and
directory structure loop (when involving snapshots).
- Fix a few 6.16 regressions: rare UAF in the foreground allocator path
when taking a transaction restart from the transaction bump
allocator, and some small fallout from the change to log the error
being corrected in the journal when repairing errors, also some
fallout from the btree node read error logging improvements.
(Alan, Bharadwaj)
- New option: journal_rewind
This lets the entire filesystem be reset to an earlier point in time.
Note that this is only a disaster recovery tool, and right now there
are major caveats to using it (discards should be disabled, in
particular), but it successfully restored the filesystem of one of
the users who was bit by the subvolume deletion bug and didn't have
backups. I'll likely be making some changes to the discard path in
the future to make this a reliable recovery tool.
- Some new btree iterator tracepoints, for tracking down some
livelock-ish behaviour we've been seeing in the main data write path.
* tag 'bcachefs-2025-06-26' of git://evilpiepirate.org/bcachefs: (51 commits)
bcachefs: Plumb correct ip to trans_relock_fail tracepoint
bcachefs: Ensure we rewind to run recovery passes
bcachefs: Ensure btree node scan runs before checking for scanned nodes
bcachefs: btree_root_unreadable_and_scan_found_nothing should not be autofix
bcachefs: fix bch2_journal_keys_peek_prev_min() underflow
bcachefs: Use wait_on_allocator() when allocating journal
bcachefs: Check for bad write buffer key when moving from journal
bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blocked
bcachefs: Fix range in bch2_lookup_indirect_extent() error path
bcachefs: fix spurious error_throw
bcachefs: Add missing bch2_err_class() to fileattr_set()
bcachefs: Add missing key type checks to check_snapshot_exists()
bcachefs: Don't log fsck err in the journal if doing repair elsewhere
bcachefs: Fix *__bch2_trans_subbuf_alloc() error path
bcachefs: Fix missing newlines before ero
bcachefs: fix spurious error in read_btree_roots()
bcachefs: fsck: Fix oops in key_visible_in_snapshot()
bcachefs: fsck: fix unhandled restart in topology repair
bcachefs: fsck: Fix check_directory_structure when no check_dirents
bcachefs: Fix restart handling in btree_node_scrub_work()
...
Linus Torvalds [Fri, 27 Jun 2025 00:06:01 +0000 (17:06 -0700)]
Merge tag 'hid-for-linus-
2025062701' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for stalls during suspend/resume cycles with hid-nintendo (Daniel
J. Ogorchock)
- memory leak and reference count fixes in hid-wacom and in-appletb-kdb
(Qasim Ijaz)
- race condition (leading to kernel crash) fix during device removal in
hid-wacom (Thomas Zeitlhofer)
- fix for missed interrupt in intel-thc-hid (Intel-thc-hid:)
- support for a bunch of new device IDs
* tag 'hid-for-linus-
2025062701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: lenovo: Add support for ThinkPad X1 Tablet Thin Keyboard Gen2
HID: appletb-kbd: fix "appletb_backlight" backlight device reference counting
HID: wacom: fix crash in wacom_aes_battery_handler()
HID: intel-ish-hid: ipc: Add Wildcat Lake PCI device ID
hid: intel-ish-hid: Use PCI_DEVICE_DATA() macro for ISH device table
HID: lenovo: Restrict F7/9/11 mode to compact keyboards only
HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY
HID: input: lower message severity of 'No inputs registered, leaving' to debug
HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras
HID: Intel-thc-hid: Intel-quicki2c: Enhance QuickI2C reset flow
HID: nintendo: avoid bluetooth suspend/resume stalls
HID: wacom: fix kobject reference count leak
HID: wacom: fix memory leak on sysfs attribute creation failure
HID: wacom: fix memory leak on kobject creation failure
Linus Torvalds [Thu, 26 Jun 2025 19:26:39 +0000 (12:26 -0700)]
Merge tag 'devicetree-fixes-for-6.16-1' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Convert altr,uart-1.0 to DT schema
dt-bindings: serial: Convert altr,juart-1.0 to DT schema
dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
Jens Axboe [Thu, 26 Jun 2025 18:17:48 +0000 (12:17 -0600)]
io_uring/kbuf: flag partial buffer mappings
A previous commit aborted mapping more for a non-incremental ring for
bundle peeking, but depending on where in the process this peeking
happened, it would not necessarily prevent a retry by the user. That can
create gaps in the received/read data.
Add struct buf_sel_arg->partial_map, which can pass this information
back. The networking side can then map that to internal state and use it
to gate retry as well.
Since this necessitates a new flag, change io_sr_msg->retry to a
retry_flags member, and store both the retry and partial map condition
in there.
Cc: stable@vger.kernel.org
Fixes:
26ec15e4b0c1 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 26 Jun 2025 16:13:27 +0000 (09:13 -0700)]
Merge tag 'net-6.16-rc4' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- bridge: fix use-after-free during router port configuration
Current release - new code bugs:
- eth: wangxun: fix the creation of page_pool
Previous releases - regressions:
- netpoll: initialize UDP checksum field before checksumming
- wifi: mac80211: finish link init before RCU publish
- bluetooth: fix use-after-free in vhci_flush()
- eth:
- ionic: fix DMA mapping test
- bnxt: properly flush XDP redirect lists
Previous releases - always broken:
- netlink: specs: enforce strict naming of properties
- unix: don't leave consecutive consumed OOB skbs.
- vsock: fix linux/vm_sockets.h userspace compilation errors
- selftests: fix TCP packet checksum"
* tag 'net-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: libwx: fix the creation of page_pool
net: selftests: fix TCP packet checksum
atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister().
netlink: specs: enforce strict naming of properties
netlink: specs: tc: replace underscores with dashes in names
netlink: specs: rt-link: replace underscores with dashes in names
netlink: specs: mptcp: replace underscores with dashes in names
netlink: specs: ovs_flow: replace underscores with dashes in names
netlink: specs: devlink: replace underscores with dashes in names
netlink: specs: dpll: replace underscores with dashes in names
netlink: specs: ethtool: replace underscores with dashes in names
netlink: specs: fou: replace underscores with dashes in names
netlink: specs: nfsd: replace underscores with dashes in names
net: enetc: Correct endianness handling in _enetc_rd_reg64
atm: idt77252: Add missing `dma_map_error()`
bnxt: properly flush XDP redirect lists
vsock/uapi: fix linux/vm_sockets.h userspace compilation errors
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
selftest: af_unix: Add tests for -ECONNRESET.
...
Jiawen Wu [Wed, 25 Jun 2025 02:39:24 +0000 (10:39 +0800)]
net: libwx: fix the creation of page_pool
'rx_ring->size' means the count of ring descriptors multiplied by the
size of one descriptor. When increasing the count of ring descriptors,
it may exceed the limit of pool size.
[ 864.209610] page_pool_create_percpu() gave up with errno -7
[ 864.209613] txgbe 0000:11:00.0: Page pool creation failed: -7
Fix to set the pool_size to the count of ring descriptors.
Fixes:
850b971110b2 ("net: libwx: Allocate Rx and Tx resources")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/434C72BFB40E350A+20250625023924.21821-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Tue, 24 Jun 2025 18:32:58 +0000 (11:32 -0700)]
net: selftests: fix TCP packet checksum
The length in the pseudo header should be the length of the L3 payload
AKA the L4 header+payload. The selftest code builds the packet from
the lower layers up, so all the headers are pushed already when it
constructs L4. We need to subtract the lower layer headers from skb->len.
Fixes:
3e1e58d64c3d ("net: add generic selftest support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250624183258.3377740-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Salvatore Bonaccorso [Wed, 25 Jun 2025 18:41:28 +0000 (20:41 +0200)]
ALSA: hda/realtek: Fix built-in mic on ASUS VivoBook X507UAR
The built-in mic of ASUS VivoBook X507UAR is broken recently by the fix
of the pin sort. The fixup ALC256_FIXUP_ASUS_MIC_NO_PRESENCE is working
for addressing the regression, too.
Fixes:
3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Reported-by: Igor Tamara <igor.tamara@gmail.com>
Closes: https://bugs.debian.org/
1108069
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Link: https://lore.kernel.org/CADdHDco7_o=4h_epjEAb92Dj-vUz_PoTC2-W9g5ncT2E0NzfeQ@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 26 Jun 2025 05:59:33 +0000 (07:59 +0200)]
Merge tag 'asoc-fix-v6.16-rc3' of https://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A small collection of fixes, the main one being a fix for resume from
hibernation on AMD systems, plus a few new quirk entries for AMD
systems.
Linus Torvalds [Thu, 26 Jun 2025 04:09:02 +0000 (21:09 -0700)]
Merge tag 'bpf-fixes' of git://git./linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix use-after-free in libbpf when map is resized (Adin Scannell)
- Fix verifier assumptions about 2nd argument of bpf_sysctl_get_name
(Jerome Marchand)
- Fix verifier assumption of nullness of d_inode in dentry (Song Liu)
- Fix global starvation of LRU map (Willem de Bruijn)
- Fix potential NULL dereference in btf_dump__free (Yuan Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: adapt one more case in test_lru_map to the new target_free
libbpf: Fix possible use-after-free for externs
selftests/bpf: Convert test_sysctl to prog_tests
bpf: Specify access type of bpf_sysctl_get_name args
libbpf: Fix null pointer dereference in btf_dump__free on allocation failure
bpf: Adjust free target to avoid global starvation of LRU map
bpf: Mark dentry->d_inode as trusted_or_null
Kent Overstreet [Wed, 25 Jun 2025 18:55:59 +0000 (14:55 -0400)]
bcachefs: Plumb correct ip to trans_relock_fail tracepoint
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Wed, 25 Jun 2025 04:48:14 +0000 (00:48 -0400)]
bcachefs: Ensure we rewind to run recovery passes
Fix a 6.16 regression from the recovery pass rework, which introduced a
bug where calling bch2_run_explicit_recovery_pass() would only return
the error code to rewind recovery for the first call that scheduled that
recovery pass.
If the error code from the first call was swallowed (because it was
called by an asynchronous codepath), subsequent calls would go "ok, this
pass is already marked as needing to run" and return 0.
Fixing this ensures that check_topology bails out to run btree_node_scan
before doing any repair.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Wed, 25 Jun 2025 16:45:11 +0000 (12:45 -0400)]
bcachefs: Ensure btree node scan runs before checking for scanned nodes
Previously, calling bch2_btree_has_scanned_nodes() when btree node
scan hadn't actually run would erroniously return false - causing us to
think a btree was entirely gone.
This fixes a 6.16 regression from moving the scheduling of btree node
scan out of bch2_btree_lost_data() (fixing the bug where we'd schedule
it persistently in the superblock) and only scheduling it when
check_toploogy() is asking for scanned btree nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Wed, 25 Jun 2025 16:17:51 +0000 (12:17 -0400)]
bcachefs: btree_root_unreadable_and_scan_found_nothing should not be autofix
Autofix is specified in btree_gc.c if it's not an important btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Linus Torvalds [Thu, 26 Jun 2025 03:48:48 +0000 (20:48 -0700)]
Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"Several mount-related fixes"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
userns and mnt_idmap leak in open_tree_attr(2)
attach_recursive_mnt(): do not lock the covering tree when sliding something under it
replace collect_mounts()/drop_collected_mounts() with a safer variant
Kuniyuki Iwashima [Tue, 24 Jun 2025 21:45:00 +0000 (14:45 -0700)]
atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister().
syzbot reported a warning below during atm_dev_register(). [0]
Before creating a new device and procfs/sysfs for it, atm_dev_register()
looks up a duplicated device by __atm_dev_lookup(). These operations are
done under atm_dev_mutex.
However, when removing a device in atm_dev_deregister(), it releases the
mutex just after removing the device from the list that __atm_dev_lookup()
iterates over.
So, there will be a small race window where the device does not exist on
the device list but procfs/sysfs are still not removed, triggering the
splat.
Let's hold the mutex until procfs/sysfs are removed in
atm_dev_deregister().
[0]:
proc_dir_entry 'atm/atmtcp:0' already registered
WARNING: CPU: 0 PID: 5919 at fs/proc/generic.c:377 proc_register+0x455/0x5f0 fs/proc/generic.c:377
Modules linked in:
CPU: 0 UID: 0 PID: 5919 Comm: syz-executor284 Not tainted
6.16.0-rc2-syzkaller-00047-g52da431bf03b #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
RIP: 0010:proc_register+0x455/0x5f0 fs/proc/generic.c:377
Code: 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 a2 01 00 00 48 8b 44 24 10 48 c7 c7 20 c0 c2 8b 48 8b b0 d8 00 00 00 e8 0c 02 1c ff 90 <0f> 0b 90 90 48 c7 c7 80 f2 82 8e e8 0b de 23 09 48 8b 4c 24 28 48
RSP: 0018:
ffffc9000466fa30 EFLAGS:
00010282
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
ffffffff817ae248
RDX:
ffff888026280000 RSI:
ffffffff817ae255 RDI:
0000000000000001
RBP:
ffff8880232bed48 R08:
0000000000000001 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000001 R12:
ffff888076ed2140
R13:
dffffc0000000000 R14:
ffff888078a61340 R15:
ffffed100edda444
FS:
00007f38b3b0c6c0(0000) GS:
ffff888124753000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f38b3bdf953 CR3:
0000000076d58000 CR4:
00000000003526f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
proc_create_data+0xbe/0x110 fs/proc/generic.c:585
atm_proc_dev_register+0x112/0x1e0 net/atm/proc.c:361
atm_dev_register+0x46d/0x890 net/atm/resources.c:113
atmtcp_create+0x77/0x210 drivers/atm/atmtcp.c:369
atmtcp_attach drivers/atm/atmtcp.c:403 [inline]
atmtcp_ioctl+0x2f9/0xd60 drivers/atm/atmtcp.c:464
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x115/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f38b3b74459
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f38b3b0c198 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
00007f38b3bfe318 RCX:
00007f38b3b74459
RDX:
0000000000000000 RSI:
0000000000006180 RDI:
0000000000000005
RBP:
00007f38b3bfe310 R08:
65732f636f72702f R09:
65732f636f72702f
R10:
65732f636f72702f R11:
0000000000000246 R12:
00007f38b3bcb0ac
R13:
00007f38b3b0c1a0 R14:
0000200000000200 R15:
00007f38b3bcb03b
</TASK>
Fixes:
64bf69ddff76 ("[ATM]: deregistration removes device from atm_devs list immediately")
Reported-by: syzbot+8bd335d2ad3b93e80715@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/
685316de.
050a0220.216029.0087.GAE@google.com/
Tested-by: syzbot+8bd335d2ad3b93e80715@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250624214505.570679-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 25 Jun 2025 22:36:30 +0000 (15:36 -0700)]
Merge branch 'netlink-specs-enforce-strict-naming-of-properties'
Jakub Kicinski says:
====================
netlink: specs: enforce strict naming of properties
I got annoyed once again by the name properties in the ethtool spec
which use underscore instead of dash. I previously assumed that there
is a lot of such properties in the specs so fixing them now would
be near impossible. On a closer look, however, I only found 22
(rough grep suggests we have ~4.8k names in the specs, so bad ones
are just 0.46%).
Add a regex to the JSON schema to enforce the naming, fix the few
bad names. I was hoping we could start enforcing this from newer
families, but there's no correlation between the protocol and the
number of errors. If anything classic netlink has more recently
added specs so it has fewer errors.
The regex is just for name properties which will end up visible
to the user (in Python or YNL CLI). I left the c-name properties
alone, those don't matter as much. C codegen rewrites them, anyway.
I'm not updating the spec for genetlink-c. Looks like it has no
users, new families use genetlink, all old ones need genetlink-legacy.
If these patches are merged I will remove genetlink-c completely
in net-next.
====================
Link: https://patch.msgid.link/20250624211002.3475021-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:10:02 +0000 (14:10 -0700)]
netlink: specs: enforce strict naming of properties
Add a regexp to make sure all names which may end up being visible
to the user consist of lower case characters, numbers and dashes.
Underscores keep sneaking into the specs, which is not visible
in the C code but makes the Python and alike inconsistent.
Note that starting with a number is okay, as in C the full
name will include the family name.
For legacy families we can't enforce the naming in the family
name or the multicast group names, as these are part of the
binary uAPI of the kernel.
For classic netlink we need to allow capital letters in names
of struct members. TC has some structs with capitalized members.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:10:01 +0000 (14:10 -0700)]
netlink: specs: tc: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes:
a1bcfde83669 ("doc/netlink/specs: Add a spec for tc")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:10:00 +0000 (14:10 -0700)]
netlink: specs: rt-link: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes:
b2f63d904e72 ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:59 +0000 (14:09 -0700)]
netlink: specs: mptcp: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes:
bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp")
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:58 +0000 (14:09 -0700)]
netlink: specs: ovs_flow: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes:
93b230b549bc ("netlink: specs: add ynl spec for ovs_flow")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20250624211002.3475021-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:57 +0000 (14:09 -0700)]
netlink: specs: devlink: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes:
429ac6211494 ("devlink: define enum for attr types of dynamic attributes")
Fixes:
f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:56 +0000 (14:09 -0700)]
netlink: specs: dpll: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes:
3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:55 +0000 (14:09 -0700)]
netlink: specs: ethtool: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen replaces special chars in names)
but gives more uniform naming in Python.
Fixes:
13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash")
Fixes:
46fb3ba95b93 ("ethtool: Add an interface for flashing transceiver modules' firmware")
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:54 +0000 (14:09 -0700)]
netlink: specs: fou: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes:
4eb77b4ecd3c ("netlink: add a proto specification for FOU")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:53 +0000 (14:09 -0700)]
netlink: specs: nfsd: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes:
13727f85b49b ("NFSD: introduce netlink stubs")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Tue, 24 Jun 2025 16:35:12 +0000 (17:35 +0100)]
net: enetc: Correct endianness handling in _enetc_rd_reg64
enetc_hw.h provides two versions of _enetc_rd_reg64.
One which simply calls ioread64() when available.
And another that composes the 64-bit result from ioread32() calls.
In the second case the code appears to assume that each ioread32() call
returns a little-endian value. However both the shift and logical or
used to compose the return value would not work correctly on big endian
systems if this were the case. Moreover, this is inconsistent with the
first case where the return value of ioread64() is assumed to be in host
byte order.
It appears that the correct approach is for both versions to treat the
return value of ioread*() functions as being in host byte order. And
this patch corrects the ioread32()-based version to do so.
This is a bug but would only manifest on big endian systems
that make use of the ioread32-based implementation of _enetc_rd_reg64.
While all in-tree users of this driver are little endian and
make use of the ioread64-based implementation of _enetc_rd_reg64.
Thus, no in-tree user of this driver is affected by this bug.
Flagged by Sparse.
Compile tested only.
Fixes:
16eb4c85c964 ("enetc: Add ethtool statistics")
Closes: https://lore.kernel.org/all/AM9PR04MB850500D3FC24FE23DEFCEA158879A@AM9PR04MB8505.eurprd04.prod.outlook.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250624-etnetc-le-v1-1-a73a95d96e4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thomas Fourier [Tue, 24 Jun 2025 06:41:47 +0000 (08:41 +0200)]
atm: idt77252: Add missing `dma_map_error()`
The DMA map functions can fail and should be tested for errors.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250624064148.12815-3-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem de Bruijn [Wed, 25 Jun 2025 21:03:55 +0000 (17:03 -0400)]
selftests/bpf: adapt one more case in test_lru_map to the new target_free
The below commit that updated BPF_MAP_TYPE_LRU_HASH free target,
also updated tools/testing/selftests/bpf/test_lru_map to match.
But that missed one case that passes with 4 cores, but fails at
higher cpu counts.
Update test_lru_sanity3 to also adjust its expectation of target_free.
This time tested with 1, 4, 16, 64 and 384 cpu count.
Fixes:
d4adf1c9ee77 ("bpf: Adjust free target to avoid global starvation of LRU map")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20250625210412.2732970-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adin Scannell [Wed, 25 Jun 2025 05:02:15 +0000 (22:02 -0700)]
libbpf: Fix possible use-after-free for externs
The `name` field in `obj->externs` points into the BTF data at initial
open time. However, some functions may invalidate this after opening and
before loading (e.g. `bpf_map__set_value_size`), which results in
pointers into freed memory and undefined behavior.
The simplest solution is to simply `strdup` these strings, similar to
the `essent_name`, and free them at the same time.
In order to test this path, the `global_map_resize` BPF selftest is
modified slightly to ensure the presence of an extern, which causes this
test to fail prior to the fix. Given there isn't an obvious API or error
to test against, I opted to add this to the existing test as an aspect
of the resizing feature rather than duplicate the test.
Fixes:
9d0a23313b1a ("libbpf: Add capability for resizing datasec maps")
Signed-off-by: Adin Scannell <amscanne@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250625050215.2777374-1-amscanne@meta.com
Linus Torvalds [Wed, 25 Jun 2025 18:54:04 +0000 (11:54 -0700)]
Merge tag 'spi-fix-v6.16-rc3' of git://git./linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One fix for a runtime PM underflow when removing the Cadence QuadSPI
driver"
* tag 'spi-fix-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence-quadspi: Fix pm runtime unbalance
Linus Torvalds [Wed, 25 Jun 2025 18:20:14 +0000 (11:20 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers.
ufs and megaraid_sas are small and obvious.
The large diffstat in fnic comes from two pieces: the addition of
quite a bit of logging (no change to function) and the reworking of
the timeout allocation path for the two conditions that can occur
simultaneously to prevent reusing the same abort frame and then both
trying to free it"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Fix missing DMA mapping error in fnic_send_frame()
scsi: fnic: Set appropriate logging level for log message
scsi: fnic: Add and improve logs in FDMI and FDMI ABTS paths
scsi: fnic: Turn off FDMI ACTIVE flags on link down
scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out
scsi: ufs: core: Fix clk scaling to be conditional in reset and restore
scsi: megaraid_sas: Fix invalid node index
Linus Torvalds [Wed, 25 Jun 2025 18:13:31 +0000 (11:13 -0700)]
Merge tag 'uml-for-6.16-rc4' of git://git./linux/kernel/git/uml/linux
Pull UML fixes from Johannes Berg:
- fix FP registers in seccomp mode
- prevent duplicate devices in VFIO support
- don't ignore errors in UBD thread start
- reduce stack use with clang 19
* tag 'uml-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: vector: Reduce stack usage in vector_eth_configure()
um: Use correct data source in fpregs_legacy_set()
um: vfio: Prevent duplicate device assignments
um: ubd: Add missing error check in start_io_thread()
Jakub Kicinski [Wed, 25 Jun 2025 17:26:16 +0000 (10:26 -0700)]
Merge tag 'wireless-2025-06-25' of https://git./linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few fixes:
- iwlegacy: work around large stack with clang/kasan
- mac80211: fix integer overflow
- mac80211: fix link struct init vs. RCU publish
- iwlwifi: fix warning on IFF_UP
* tag 'wireless-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
wifi: mac80211: fix beacon interval calculation overflow
wifi: iwlegacy: work around excessive stack usage on clang/kasan
====================
Link: https://patch.msgid.link/20250625115433.41381-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jens Axboe [Wed, 25 Jun 2025 16:17:06 +0000 (10:17 -0600)]
io_uring/net: mark iov as dynamically allocated even for single segments
A bigger array of vecs could've been allocated, but
io_ring_buffers_peek() still decided to cap the mapped range depending
on how much data was available. Hence don't rely on the segment count
to know if the request should be marked as needing cleanup, always
check upfront if the iov array is different than the fast_iov array.
Fixes:
26ec15e4b0c1 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Penglei Jiang [Wed, 25 Jun 2025 10:27:03 +0000 (03:27 -0700)]
io_uring: fix resource leak in io_import_dmabuf()
Replace the return statement with setting ret = -EINVAL and jumping to
the err label to ensure resources are released via io_release_dmabuf.
Fixes:
a5c98e942457 ("io_uring/zcrx: dmabuf backed zerocopy receive")
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/r/20250625102703.68336-1-superman.xpt@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Niklas Cassel [Tue, 24 Jun 2025 07:40:30 +0000 (09:40 +0200)]
ata: ahci: Use correct DMI identifier for ASUSPRO-D840SA LPM quirk
ASUS store the board name in DMI_PRODUCT_NAME rather than
DMI_PRODUCT_VERSION. (Apparently it is only Lenovo that stores the
model-name in DMI_PRODUCT_VERSION.)
Use the correct DMI identifier, DMI_PRODUCT_NAME, to match the
ASUSPRO-D840SA board, such that the quirk actually gets applied.
Cc: stable@vger.kernel.org
Reported-by: Andy Yang <andyybtc79@gmail.com>
Tested-by: Andy Yang <andyybtc79@gmail.com>
Closes: https://lore.kernel.org/linux-ide/aFb3wXAwJSSJUB7o@ryzen/
Fixes:
b5acc3628898 ("ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard")
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250624074029.963028-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Johannes Berg [Wed, 25 Jun 2025 08:19:39 +0000 (10:19 +0200)]
Merge tag 'iwlwifi-fixes-2025-06-25' of https://git./linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi-fixes: fix failure in interface up
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tiwei Bie [Mon, 23 Jun 2025 11:08:29 +0000 (19:08 +0800)]
um: vector: Reduce stack usage in vector_eth_configure()
When compiling with clang (19.1.7), initializing *vp using a compound
literal may result in excessive stack usage. Fix it by initializing the
required fields of *vp individually.
Without this patch:
$ objdump -d arch/um/drivers/vector_kern.o | ./scripts/checkstack.pl x86_64 0
...
0x0000000000000540 vector_eth_configure [vector_kern.o]:1472
...
With this patch:
$ objdump -d arch/um/drivers/vector_kern.o | ./scripts/checkstack.pl x86_64 0
...
0x0000000000000540 vector_eth_configure [vector_kern.o]:208
...
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202506221017.WtB7Usua-lkp@intel.com/
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250623110829.314864-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tiwei Bie [Fri, 6 Jun 2025 12:44:28 +0000 (20:44 +0800)]
um: Use correct data source in fpregs_legacy_set()
Read from the buffer pointed to by 'from' instead of '&buf', as
'buf' contains no valid data when 'ubuf' is NULL.
Fixes:
b1e1bd2e6943 ("um: Add helper functions to get/set state for SECCOMP")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250606124428.148164-5-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tiwei Bie [Fri, 6 Jun 2025 12:44:27 +0000 (20:44 +0800)]
um: vfio: Prevent duplicate device assignments
Ensure devices are assigned only once. Reject subsequent requests
for duplicate assignments.
Fixes:
a0e2cb6a9063 ("um: Add VFIO-based virtual PCI driver")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250606124428.148164-4-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tiwei Bie [Fri, 6 Jun 2025 12:44:25 +0000 (20:44 +0800)]
um: ubd: Add missing error check in start_io_thread()
The subsequent call to os_set_fd_block() overwrites the previous
return value. OR the two return values together to fix it.
Fixes:
f88f0bdfc32f ("um: UBD Improvements")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250606124428.148164-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pei Xiao [Tue, 24 Jun 2025 09:00:47 +0000 (17:00 +0800)]
ALSA: usb: qcom: fix NULL pointer dereference in qmi_stop_session
The find_substream() call may return NULL, but the error path
dereferenced 'subs' unconditionally via dev_err(&subs->dev->dev, ...),
causing a NULL pointer dereference when subs is NULL.
Fix by switching to &uadev[idx].udev->dev which is always valid
in this context.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/86ac2939273ac853535049e60391c09d7688714e.1750755508.git.xiaopei01@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pavel Begunkov [Tue, 24 Jun 2025 13:40:35 +0000 (14:40 +0100)]
io_uring: don't assume uaddr alignment in io_vec_fill_bvec
There is no guaranteed alignment for user pointers. Don't use mask
trickery and adjust the offset by bv_offset.
Cc: stable@vger.kernel.org
Reported-by: David Hildenbrand <david@redhat.com>
Fixes:
9ef4cbbcb4ac3 ("io_uring: add infra for importing vectored reg buffers")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/19530391f5c361a026ac9b401ff8e123bde55d98.1750771718.git.asml.silence@gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Tue, 24 Jun 2025 13:40:34 +0000 (14:40 +0100)]
io_uring/rsrc: don't rely on user vaddr alignment
There is no guaranteed alignment for user pointers, however the
calculation of an offset of the first page into a folio after coalescing
uses some weird bit mask logic, get rid of it.
Cc: stable@vger.kernel.org
Reported-by: David Hildenbrand <david@redhat.com>
Fixes:
a8edbb424b139 ("io_uring/rsrc: enable multi-hugepage buffer coalescing")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/e387b4c78b33f231105a601d84eefd8301f57954.1750771718.git.asml.silence@gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Tue, 24 Jun 2025 13:40:33 +0000 (14:40 +0100)]
io_uring/rsrc: fix folio unpinning
syzbot complains about an unmapping failure:
[ 108.070381][ T14] kernel BUG at mm/gup.c:71!
[ 108.070502][ T14] Internal error: Oops - BUG:
00000000f2000800 [#1] SMP
[ 108.123672][ T14] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-
20250221-8.fc42 02/21/2025
[ 108.127458][ T14] Workqueue: iou_exit io_ring_exit_work
[ 108.174205][ T14] Call trace:
[ 108.175649][ T14] sanity_check_pinned_pages+0x7cc/0x7d0 (P)
[ 108.178138][ T14] unpin_user_page+0x80/0x10c
[ 108.180189][ T14] io_release_ubuf+0x84/0xf8
[ 108.182196][ T14] io_free_rsrc_node+0x250/0x57c
[ 108.184345][ T14] io_rsrc_data_free+0x148/0x298
[ 108.186493][ T14] io_sqe_buffers_unregister+0x84/0xa0
[ 108.188991][ T14] io_ring_ctx_free+0x48/0x480
[ 108.191057][ T14] io_ring_exit_work+0x764/0x7d8
[ 108.193207][ T14] process_one_work+0x7e8/0x155c
[ 108.195431][ T14] worker_thread+0x958/0xed8
[ 108.197561][ T14] kthread+0x5fc/0x75c
[ 108.199362][ T14] ret_from_fork+0x10/0x20
We can pin a tail page of a folio, but then io_uring will try to unpin
the head page of the folio. While it should be fine in terms of keeping
the page actually alive, mm folks say it's wrong and triggers a debug
warning. Use unpin_user_folio() instead of unpin_user_page*.
Cc: stable@vger.kernel.org
Debugged-by: David Hildenbrand <david@redhat.com>
Reported-by: syzbot+1d335893772467199ab6@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/
683f1551.
050a0220.55ceb.0017.GAE@google.com
Fixes:
a8edbb424b139 ("io_uring/rsrc: enable multi-hugepage buffer coalescing")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/a28b0f87339ac2acf14a645dad1e95bbcbf18acd.1750771718.git.asml.silence@gmail.com/
[axboe: adapt to current tree, massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yan Zhai [Mon, 23 Jun 2025 16:06:38 +0000 (09:06 -0700)]
bnxt: properly flush XDP redirect lists
We encountered following crash when testing a XDP_REDIRECT feature
in production:
[56251.579676] list_add corruption. next->prev should be prev (
ffff93120dd40f30), but was
ffffb301ef3a6740. (next=
ffff93120dd
40f30).
[56251.601413] ------------[ cut here ]------------
[56251.611357] kernel BUG at lib/list_debug.c:29!
[56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6.
3 #1
[56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE
[56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025
[56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0
[56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48
89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89
[56251.725811] RSP: 0018:
ffff93120dd40b80 EFLAGS:
00010246
[56251.736094] RAX:
0000000000000075 RBX:
ffffb301e6bba9d8 RCX:
0000000000000000
[56251.748260] RDX:
0000000000000000 RSI:
ffff9149afda0b80 RDI:
ffff9149afda0b80
[56251.760349] RBP:
ffff9131e49c8000 R08:
0000000000000000 R09:
ffff93120dd40a18
[56251.772382] R10:
ffff9159cf2ce1a8 R11:
0000000000000003 R12:
ffff911a80850000
[56251.784364] R13:
ffff93120fbc7000 R14:
0000000000000010 R15:
ffff9139e7510e40
[56251.796278] FS:
0000000000000000(0000) GS:
ffff9149afd80000(0000) knlGS:
0000000000000000
[56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[56251.819561] CR2:
00007f5e85e6f300 CR3:
00000038b85e2006 CR4:
0000000000770ef0
[56251.831365] PKRU:
55555554
[56251.838653] Call Trace:
[56251.845560] <IRQ>
[56251.851943] cpu_map_enqueue.cold+0x5/0xa
[56251.860243] xdp_do_redirect+0x2d9/0x480
[56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en]
[56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en]
[56251.885665] ? cpu_max_write+0x1e/0x100
[56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en]
[56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en]
[56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.944250] __napi_poll+0x2b/0x160
[56251.951155] bpf_trampoline_6442548651+0x79/0x123
[56251.959262] __napi_poll+0x5/0x160
[56251.966037] net_rx_action+0x3d2/0x880
[56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.989262] ? __hrtimer_run_queues+0x162/0x2a0
[56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en]
[56252.019903] handle_softirqs+0xcf/0x270
[56252.026650] irq_exit_rcu+0x67/0x90
[56252.032933] common_interrupt+0x85/0xa0
[56252.039498] </IRQ>
[56252.044246] <TASK>
[56252.048935] asm_common_interrupt+0x26/0x40
[56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420
[56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae
01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29
[56252.088911] RSP: 0018:
ffff93120c97fe98 EFLAGS:
00000202
[56252.096912] RAX:
ffff9149afd80000 RBX:
ffff9141d3a72800 RCX:
0000000000000000
[56252.106844] RDX:
00003329176c6b98 RSI:
ffffffe36db3fdc7 RDI:
0000000000000000
[56252.116733] RBP:
0000000000000002 R08:
0000000000000002 R09:
000000000000004e
[56252.126652] R10:
ffff9149afdb30c4 R11:
071c71c71c71c71c R12:
ffffffff985ff860
[56252.136637] R13:
00003329176c6b98 R14:
0000000000000002 R15:
0000000000000000
[56252.146667] ? cpuidle_enter_state+0xab/0x420
[56252.153909] cpuidle_enter+0x2d/0x40
[56252.160360] do_idle+0x176/0x1c0
[56252.166456] cpu_startup_entry+0x29/0x30
[56252.173248] start_secondary+0xf7/0x100
[56252.179941] common_startup_64+0x13e/0x141
[56252.186886] </TASK>
From the crash dump, we found that the cpu_map_flush_list inside
redirect info is partially corrupted: its list_head->next points to
itself, but list_head->prev points to a valid list of unflushed bq
entries.
This turned out to be a result of missed XDP flush on redirect lists. By
digging in the actual source code, we found that
commit
7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX
ring structures") incorrectly overwrites the event mask for XDP_REDIRECT
in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX
and XDP_REDIRECT randomly for incoming packets in a naive XDP program.
Properly propagate the XDP_REDIRECT events back fixes the crash.
Fixes:
a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers")
Tested-by: Andrew Rzeznik <arzeznik@cloudflare.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Link: https://patch.msgid.link/aFl7jpCNzscumuN2@debian.debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 25 Jun 2025 00:20:43 +0000 (17:20 -0700)]
Merge tag 'selinux-pr-
20250624' of git://git./linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"Another small SELinux patch to fix a problem seen by the dracut-ng
folks during early boot when SELinux is enabled, but the policy has
yet to be loaded"
* tag 'selinux-pr-
20250624' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: change security_compute_sid to return the ssid or tsid on match
Stefano Garzarella [Mon, 23 Jun 2025 10:00:53 +0000 (12:00 +0200)]
vsock/uapi: fix linux/vm_sockets.h userspace compilation errors
If a userspace application just include <linux/vm_sockets.h> will fail
to build with the following errors:
/usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’
182 | unsigned char svm_zero[sizeof(struct sockaddr) -
| ^~~~~~
/usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function)
183 | sizeof(sa_family_t) -
|
Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__)
where `struct sockaddr` and `sa_family_t` are defined.
We already do something similar in <linux/mptcp.h> and <linux/if.h>.
Fixes:
d021c344051a ("VSOCK: Introduce VM Sockets")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kent Overstreet [Tue, 24 Jun 2025 20:04:32 +0000 (16:04 -0400)]
bcachefs: fix bch2_journal_keys_peek_prev_min() underflow
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Tue, 24 Jun 2025 21:53:00 +0000 (17:53 -0400)]
bcachefs: Use wait_on_allocator() when allocating journal
wait_on_allocator() emits debug info when we hang trying to allocate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 23 Jun 2025 22:42:42 +0000 (18:42 -0400)]
bcachefs: Check for bad write buffer key when moving from journal
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Alan Huang [Tue, 24 Jun 2025 19:10:27 +0000 (03:10 +0800)]
bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blocked
Reported-by: syzbot+d540192e763531d307ff@syzkaller.appspotmail.com
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Khairul Anuar Romli [Mon, 16 Jun 2025 01:13:53 +0000 (09:13 +0800)]
spi: spi-cadence-quadspi: Fix pm runtime unbalance
Having PM put sync in remove function is causing PM underflow during
remove operation. This is caused by the function, runtime_pm_get_sync,
not being called anywhere during the op. Ensure that calls to
pm_runtime_enable()/pm_runtime_disable() and
pm_runtime_get_sync()/pm_runtime_put_sync() match.
echo
108d2000.spi > /sys/bus/platform/drivers/cadence-qspi/unbind
[ 49.644256] Deleting MTD partitions on "
108d2000.spi.0":
[ 49.649575] Deleting u-boot MTD partition
[ 49.684087] Deleting root MTD partition
[ 49.724188] cadence-qspi
108d2000.spi: Runtime PM usage count underflow!
Continuous bind/unbind will result in an "Unbalanced pm_runtime_enable" error.
Subsequent unbind attempts will return a "No such device" error, while bind
attempts will return a "Resource temporarily unavailable" error.
[ 47.592434] cadence-qspi
108d2000.spi: Runtime PM usage count underflow!
[ 49.592233] cadence-qspi
108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 53.232309] cadence-qspi
108d2000.spi: Runtime PM usage count underflow!
[ 55.828550] cadence-qspi
108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 57.940627] cadence-qspi
108d2000.spi: Runtime PM usage count underflow!
[ 59.912490] cadence-qspi
108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 61.876243] cadence-qspi
108d2000.spi: Runtime PM usage count underflow!
[ 61.883000] platform
108d2000.spi: Unbalanced pm_runtime_enable!
[ 532.012270] cadence-qspi
108d2000.spi: probe with driver cadence-qspi failed1
Also, change clk_disable_unprepare() to clk_disable() since continuous
bind and unbind operations will trigger a warning indicating that the clock is
already unprepared.
Fixes:
4892b374c9b7 ("mtd: spi-nor: cadence-quadspi: Add runtime PM support")
cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/4e7a4b8aba300e629b45a04f90bddf665fbdb335.1749601877.git.khairul.anuar.romli@altera.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tamura Dai [Sun, 15 Jun 2025 23:55:48 +0000 (08:55 +0900)]
ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak.
sof_pdata->tplg_filename can have address allocated by kstrdup()
and can be overwritten. Memory leak was detected with kmemleak:
unreferenced object 0xffff88812391ff60 (size 16):
comm "kworker/4:1", pid 161, jiffies
4294802931
hex dump (first 16 bytes):
73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic.
backtrace (crc
4bf1675c):
__kmalloc_node_track_caller_noprof+0x49c/0x6b0
kstrdup+0x46/0xc0
hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic]
sof_init_environment+0x16f/0xb50 [snd_sof]
sof_probe_continue+0x45/0x7c0 [snd_sof]
sof_probe_work+0x1e/0x40 [snd_sof]
process_one_work+0x894/0x14b0
worker_thread+0x5e5/0xfb0
kthread+0x39d/0x760
ret_from_fork+0x31/0x70
ret_from_fork_asm+0x1a/0x30
Signed-off-by: Tamura Dai <kirinode0@gmail.com>
Link: https://patch.msgid.link/20250615235548.8591-1-kirinode0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Al Viro [Tue, 24 Jun 2025 14:25:04 +0000 (10:25 -0400)]
userns and mnt_idmap leak in open_tree_attr(2)
Once want_mount_setattr() has returned a positive, it does require
finish_mount_kattr() to release ->mnt_userns. Failing do_mount_setattr()
does not change that.
As the result, we can end up leaking userns and possibly mnt_idmap as
well.
Fixes:
c4a16820d901 ("fs: add open_tree_attr()")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Johannes Berg [Tue, 24 Jun 2025 11:07:49 +0000 (13:07 +0200)]
wifi: mac80211: finish link init before RCU publish
Since the link/conf pointers can be accessed without any
protection other than RCU, make sure the data is actually
set up before publishing the structures.
Fixes:
b2e8434f1829 ("wifi: mac80211: set up/tear down client vif links properly")
Link: https://patch.msgid.link/20250624130749.9a308b713c74.I4a80f5eead112a38730939ea591d2e275c721256@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jack Yu [Tue, 24 Jun 2025 02:59:28 +0000 (02:59 +0000)]
ASoC: rt721-sdca: fix boost gain calculation error
Fix the boost gain calculation error in rt721_sdca_set_gain_get.
This patch is specific for "FU33 Boost Volume".
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/1b18fcde41c64d6fa85451d523c0434a@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Paolo Abeni [Tue, 24 Jun 2025 10:40:54 +0000 (12:40 +0200)]
Merge tag 'for-net-2025-06-23' of git://git./linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- L2CAP: Fix L2CAP MTU negotiation
- hci_core: Fix use-after-free in vhci_flush()
- btintel_pcie: Fix potential race condition in firmware download
- hci_qca: fix unable to load the BT driver
* tag 'for-net-2025-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
driver: bluetooth: hci_qca:fix unable to load the BT driver
Bluetooth: L2CAP: Fix L2CAP MTU negotiation
Bluetooth: btintel_pcie: Fix potential race condition in firmware download
====================
Link: https://patch.msgid.link/20250623165405.227619-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Miri Korenblit [Tue, 24 Jun 2025 07:14:27 +0000 (10:14 +0300)]
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
Unfortunately, FWs of some devices don't have the version of the
iwl_mac_config_cmd defined in the TLVs. We send 0 as the 'def argument
to iwl_fw_lookup_cmd_ver, so for such FWs, the return value will be 0,
leading to a warning, and to not sending the command.
Fix this by assuming that the default version is 1.
Fixes:
83f3ac2848b4 ("wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250624071427.2662621-1-miriam.rachel.korenblit@intel.com
Harshit Mogalapalli [Mon, 23 Jun 2025 14:26:27 +0000 (07:26 -0700)]
ALSA: qc_audio_offload: Fix missing error code in prepare_qmi_response()
When snd_soc_usb_find_priv_data() fails, return failure instead of
success. While we are at it also use direct returns at first few error
paths where there is no additional cleanup needed.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/Z_40qL4JnyjR4j0O@stanley.mountain/
Fixes:
326bbc348298 ("ALSA: usb-audio: qcom: Introduce QC USB SND offloading support")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20250623142639.2938056-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Paolo Abeni [Tue, 24 Jun 2025 08:10:09 +0000 (10:10 +0200)]
Merge branch 'af_unix-fix-two-oob-issues'
Kuniyuki Iwashima says:
====================
af_unix: Fix two OOB issues.
From: Kuniyuki Iwashima <kuniyu@google.com>
Recently, two issues are reported regarding MSG_OOB.
Patch 1 fixes issues that happen when multiple consumed OOB
skbs are placed consecutively in the recv queue.
Patch 2 fixes an inconsistent behaviour that close()ing a socket
with a consumed OOB skb at the head of the recv queue triggers
-ECONNRESET on the peer's recv().
v1: https://lore.kernel.org/netdev/
20250618043453.281247-1-kuni1840@gmail.com/
====================
Link: https://patch.msgid.link/20250619041457.1132791-1-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima [Thu, 19 Jun 2025 04:13:58 +0000 (21:13 -0700)]
selftest: af_unix: Add tests for -ECONNRESET.
A new function resetpair() calls close() for the receiver and checks
the return value from recv() on the initial sender side.
Now resetpair() is added to each test case and some additional test
cases.
Note that TCP sets -ECONNRESET to the consumed OOB, but we have decided
not to touch TCP MSG_OOB code in the past.
Before:
# RUN msg_oob.no_peek.ex_oob_ex_oob ...
# msg_oob.c:236:ex_oob_ex_oob:AF_UNIX :Connection reset by peer
# msg_oob.c:237:ex_oob_ex_oob:Expected:
# msg_oob.c:239:ex_oob_ex_oob:Expected ret[0] (-1) == expected_len (0)
# ex_oob_ex_oob: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ex_oob
not ok 14 msg_oob.no_peek.ex_oob_ex_oob
...
# FAILED: 36 / 48 tests passed.
# Totals: pass:36 fail:12 xfail:0 xpass:0 skip:0 error:0
After:
# RUN msg_oob.no_peek.ex_oob_ex_oob ...
# msg_oob.c:244:ex_oob_ex_oob:AF_UNIX :
# msg_oob.c:245:ex_oob_ex_oob:TCP :Connection reset by peer
# OK msg_oob.no_peek.ex_oob_ex_oob
ok 14 msg_oob.no_peek.ex_oob_ex_oob
...
# PASSED: 48 / 48 tests passed.
# Totals: pass:48 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-5-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima [Thu, 19 Jun 2025 04:13:57 +0000 (21:13 -0700)]
af_unix: Don't set -ECONNRESET for consumed OOB skb.
Christian Brauner reported that even after MSG_OOB data is consumed,
calling close() on the receiver socket causes the peer's recv() to
return -ECONNRESET:
1. send() and recv() an OOB data.
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> s1.send(b'x', MSG_OOB)
1
>>> s2.recv(1, MSG_OOB)
b'x'
2. close() for s2 sets ECONNRESET to s1->sk_err even though
s2 consumed the OOB data
>>> s2.close()
>>> s1.recv(10, MSG_DONTWAIT)
...
ConnectionResetError: [Errno 104] Connection reset by peer
Even after being consumed, the skb holding the OOB 1-byte data stays in
the recv queue to mark the OOB boundary and break recv() at that point.
This must be considered while close()ing a socket.
Let's skip the leading consumed OOB skb while checking the -ECONNRESET
condition in unix_release_sock().
Fixes:
314001f0bf92 ("af_unix: Add OOB support")
Reported-by: Christian Brauner <brauner@kernel.org>
Closes: https://lore.kernel.org/netdev/
20250529-sinkt-abfeuern-
e7b08200c6b0@brauner/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://patch.msgid.link/20250619041457.1132791-4-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima [Thu, 19 Jun 2025 04:13:56 +0000 (21:13 -0700)]
af_unix: Add test for consecutive consumed OOB.
Let's add a test case where consecutive concumed OOB skbs stay
at the head of the queue.
Without the previous patch, ioctl(SIOCATMARK) assertion fails.
Before:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# msg_oob.c:305:ex_oob_ex_oob_oob:Expected answ[0] (0) == oob_head (1)
# ex_oob_ex_oob_oob: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ex_oob_oob
not ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
After:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# OK msg_oob.no_peek.ex_oob_ex_oob_oob
ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-3-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima [Thu, 19 Jun 2025 04:13:55 +0000 (21:13 -0700)]
af_unix: Don't leave consecutive consumed OOB skbs.
Jann Horn reported a use-after-free in unix_stream_read_generic().
The following sequences reproduce the issue:
$ python3
from socket import *
s1, s2 = socketpair(AF_UNIX, SOCK_STREAM)
s1.send(b'x', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'y', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'z', MSG_OOB)
s2.recv(1) # recv 'z' illegally
s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free)
Even though a user reads OOB data, the skb holding the data stays on
the recv queue to mark the OOB boundary and break the next recv().
After the last send() in the scenario above, the sk2's recv queue has
2 leading consumed OOB skbs and 1 real OOB skb.
Then, the following happens during the next recv() without MSG_OOB
1. unix_stream_read_generic() peeks the first consumed OOB skb
2. manage_oob() returns the next consumed OOB skb
3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb
4. unix_stream_read_generic() reads and frees the OOB skb
, and the last recv(MSG_OOB) triggers KASAN splat.
The 3. above occurs because of the SO_PEEK_OFF code, which does not
expect unix_skb_len(skb) to be 0, but this is true for such consumed
OOB skbs.
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
skb = skb_peek_next(skb, &sk->sk_receive_queue);
...
}
In addition to this use-after-free, there is another issue that
ioctl(SIOCATMARK) does not function properly with consecutive consumed
OOB skbs.
So, nothing good comes out of such a situation.
Instead of complicating manage_oob(), ioctl() handling, and the next
ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs,
let's not leave such consecutive OOB unnecessarily.
Now, while receiving an OOB skb in unix_stream_recv_urg(), if its
previous skb is a consumed OOB skb, it is freed.
[0]:
BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027)
Read of size 4 at addr
ffff888106ef2904 by task python3/315
CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted
6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:409 mm/kasan/report.c:521)
kasan_report (mm/kasan/report.c:636)
unix_stream_read_actor (net/unix/af_unix.c:3027)
unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847)
unix_stream_recvmsg (net/unix/af_unix.c:3048)
sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20))
__sys_recvfrom (net/socket.c:2278)
__x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f8911fcea06
Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
RSP: 002b:
00007fffdb0dccb0 EFLAGS:
00000202 ORIG_RAX:
000000000000002d
RAX:
ffffffffffffffda RBX:
00007fffdb0dcdc8 RCX:
00007f8911fcea06
RDX:
0000000000000001 RSI:
00007f8911a5e060 RDI:
0000000000000006
RBP:
00007fffdb0dccd0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000001 R11:
0000000000000202 R12:
00007f89119a7d20
R13:
ffffffffc4653600 R14:
0000000000000000 R15:
0000000000000000
</TASK>
Allocated by task 315:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
__kasan_slab_alloc (mm/kasan/common.c:348)
kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249)
__alloc_skb (net/core/skbuff.c:660 (discriminator 4))
alloc_skb_with_frags (./include/linux/skbuff.h:1336 net/core/skbuff.c:6668)
sock_alloc_send_pskb (net/core/sock.c:2993)
unix_stream_sendmsg (./include/net/sock.h:1847 net/unix/af_unix.c:2256 net/unix/af_unix.c:2418)
__sys_sendto (net/socket.c:712 (discriminator 20) net/socket.c:727 (discriminator 20) net/socket.c:2226 (discriminator 20))
__x64_sys_sendto (net/socket.c:2233 (discriminator 1) net/socket.c:2229 (discriminator 1) net/socket.c:2229 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 315:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
kasan_save_free_info (mm/kasan/generic.c:579 (discriminator 1))
__kasan_slab_free (mm/kasan/common.c:271)
kmem_cache_free (mm/slub.c:4643 (discriminator 3) mm/slub.c:4745 (discriminator 3))
unix_stream_read_generic (net/unix/af_unix.c:3010)
unix_stream_recvmsg (net/unix/af_unix.c:3048)
sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20))
__sys_recvfrom (net/socket.c:2278)
__x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
The buggy address belongs to the object at
ffff888106ef28c0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 68 bytes inside of
freed 224-byte region [
ffff888106ef28c0,
ffff888106ef29a0)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:
0000000000000000 index:0xffff888106ef3cc0 pfn:0x106ef2
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x200000000000040(head|node=0|zone=2)
page_type: f5(slab)
raw:
0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004
raw:
ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000
head:
0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004
head:
ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000
head:
0200000000000001 ffffea00041bbc81 00000000ffffffff 00000000ffffffff
head:
0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106ef2800: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888106ef2880: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>
ffff888106ef2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888106ef2980: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888106ef2a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes:
314001f0bf92 ("af_unix: Add OOB support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-2-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lachlan Hodges [Sat, 21 Jun 2025 12:32:09 +0000 (22:32 +1000)]
wifi: mac80211: fix beacon interval calculation overflow
As we are converting from TU to usecs, a beacon interval of
100*1024 usecs will lead to integer wrapping. To fix change
to use a u32.
Fixes:
057d5f4ba1e4 ("mac80211: sync dtim_count to TSF")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250621123209.511796-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Arnd Bergmann [Fri, 20 Jun 2025 11:39:42 +0000 (13:39 +0200)]
wifi: iwlegacy: work around excessive stack usage on clang/kasan
In some rare randconfig builds, I seem to trigger a bug in clang where
it unrolls a loop but then runs out of registers, which then get
spilled to the stack:
net/wireless/intel/iwlegacy/4965-rs.c:2262:1: error: stack frame size (1696) exceeds limit (1280) in 'il4965_rs_rate_init' [-Werror,-Wframe-larger-than]
This seems to be the same one I saw in the omapdrm driver, and there is
an easy workaround by not inlining the il4965_rs_rate_scale_clear_win
function.
Link: https://github.com/llvm/llvm-project/issues/143908
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20250620113946.3987160-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Alexei Starovoitov [Tue, 24 Jun 2025 04:50:44 +0000 (21:50 -0700)]
Merge branch 'bpf-specify-access-type-of-bpf_sysctl_get_name-args'
Jerome Marchand says:
====================
bpf: Specify access type of bpf_sysctl_get_name args
The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype. Until commit
37cce22dbd51a ("bpf: verifier: Refactor helper
access type tracking") that mistake was hidden by the way the verifier
treated helper accesses. Since then, the verifier, working on wrong
infromation from the prototype, can make faulty optimization that
would had been caught by the test_sysctl selftests if it was run by
the CI.
The first patch fixes bpf_sysctl_get_name prototype.
The second patch converts the test_sysctl to prog_tests so that it
will be run by the CI and catch similar issues in the future.
Changes in v3:
- Use ASSERT* macro instead of CHECK_FAIL.
- Remove useless code.
Changes in v2:
- Replace ARG_PTR_TO_UNINIT_MEM by ARG_PTR_TO_MEM | MEM_WRITE.
- Converts test_sysctl to prog_tests.
====================
Link: https://patch.msgid.link/20250619140603.148942-1-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jerome Marchand [Thu, 19 Jun 2025 14:06:03 +0000 (16:06 +0200)]
selftests/bpf: Convert test_sysctl to prog_tests
Convert test_sysctl test to prog_tests with minimal change to the
tests themselves.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250619140603.148942-3-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jerome Marchand [Thu, 19 Jun 2025 14:06:02 +0000 (16:06 +0200)]
bpf: Specify access type of bpf_sysctl_get_name args
The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype.
Until commit
37cce22dbd51a ("bpf: verifier: Refactor helper access
type tracking"), all helper accesses were considered as a possible
write access by the verifier, so no big harm was done. However, since
then, the verifier might make wrong asssumption about the content of
that address which might lead it to make faulty optimizations (such as
removing code that was wrongly labeled dead). This is what happens in
test_sysctl selftest to the tests related to sysctl_get_name.
Add MEM_WRITE flag the second argument of bpf_sysctl_get_name().
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250619140603.148942-2-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ido Schimmel [Thu, 19 Jun 2025 18:22:28 +0000 (21:22 +0300)]
bridge: mcast: Fix use-after-free during router port configuration
The bridge maintains a global list of ports behind which a multicast
router resides. The list is consulted during forwarding to ensure
multicast packets are forwarded to these ports even if the ports are not
member in the matching MDB entry.
When per-VLAN multicast snooping is enabled, the per-port multicast
context is disabled on each port and the port is removed from the global
router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 1
$ bridge -d mdb show | grep router
However, the port can be re-added to the global list even when per-VLAN
multicast snooping is enabled:
# ip link set dev dummy1 type bridge_slave mcast_router 0
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
Since commit
4b30ae9adb04 ("net: bridge: mcast: re-implement
br_multicast_{enable, disable}_port functions"), when per-VLAN multicast
snooping is enabled, multicast disablement on a port will disable the
per-{port, VLAN} multicast contexts and not the per-port one. As a
result, a port will remain in the global router port list even after it
is deleted. This will lead to a use-after-free [1] when the list is
traversed (when adding a new port to the list, for example):
# ip link del dev dummy1
# ip link add name dummy2 up master br1 type dummy
# ip link set dev dummy2 type bridge_slave mcast_router 2
Similarly, stale entries can also be found in the per-VLAN router port
list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN}
contexts are disabled on each port and the port is removed from the
per-VLAN router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1
# ip link add name dummy1 up master br1 type dummy
# bridge vlan add vid 2 dev dummy1
# bridge vlan global set vid 2 dev br1 mcast_snooping 1
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 0
$ bridge vlan global show dev br1 vid 2 | grep router
However, the port can be re-added to the per-VLAN list even when
per-VLAN multicast snooping is disabled:
# bridge vlan set vid 2 dev dummy1 mcast_router 0
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
When the VLAN is deleted from the port, the per-{port, VLAN} multicast
context will not be disabled since multicast snooping is not enabled
on the VLAN. As a result, the port will remain in the per-VLAN router
port list even after it is no longer member in the VLAN. This will lead
to a use-after-free [2] when the list is traversed (when adding a new
port to the list, for example):
# ip link add name dummy2 up master br1 type dummy
# bridge vlan add vid 2 dev dummy2
# bridge vlan del vid 2 dev dummy1
# bridge vlan set vid 2 dev dummy2 mcast_router 2
Fix these issues by removing the port from the relevant (global or
per-VLAN) router port list in br_multicast_port_ctx_deinit(). The
function is invoked during port deletion with the per-port multicast
context and during VLAN deletion with the per-{port, VLAN} multicast
context.
Note that deleting the multicast router timer is not enough as it only
takes care of the temporary multicast router states (1 or 3) and not the
permanent one (2).
[1]
BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560
Write of size 8 at addr
ffff888004a67328 by task ip/384
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x3f1/0x560
br_multicast_set_port_router+0x74e/0xac0
br_setport+0xa55/0x1870
br_port_slave_changelink+0x95/0x120
__rtnl_newlink+0x5e8/0xa40
rtnl_newlink+0x627/0xb00
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
BUG: KASAN: slab-use-after-free in br_multicast_add_router.part.0+0x378/0x560
Read of size 8 at addr
ffff888009f00840 by task bridge/391
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x378/0x560
br_multicast_set_port_router+0x6f9/0xac0
br_vlan_process_options+0x8b6/0x1430
br_vlan_rtm_process_one+0x605/0xa30
br_vlan_rtm_process+0x396/0x4c0
rtnetlink_rcv_msg+0x2f7/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes:
2796d846d74a ("net: bridge: vlan: convert mcast router global option to per-vlan entry")
Fixes:
4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions")
Reported-by: syzbot+7bfa4b72c6a5da128d32@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/
684c18bd.
a00a0220.279073.000b.GAE@google.com/T/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250619182228.1656906-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thomas Fourier [Thu, 19 Jun 2025 09:45:30 +0000 (11:45 +0200)]
ethernet: ionic: Fix DMA mapping tests
Change error values of `ionic_tx_map_single()` and `ionic_tx_map_frag()`
from 0 to `DMA_MAPPING_ERROR` to prevent collision with 0 as a valid
address.
This also fixes the use of `dma_mapping_error()` to test against 0 in
`ionic_xdp_post_frame()`
Fixes:
0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Fixes:
56e41ee12d2d ("ionic: better dma-map error handling")
Fixes:
ac8813c0ab7d ("ionic: convert Rx queue buffers to use page_pool")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20250619094538.283723-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 23 Jun 2025 22:02:57 +0000 (15:02 -0700)]
Merge tag 'for-6.16/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-crypt: fix a crash on 32-bit machines
- dm-raid: replace "rdev" with correct loop variable name "r"
* tag 'for-6.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-raid: fix variable in journal device check
dm-crypt: Extend state buffer size in crypt_iv_lmk_one
Linus Torvalds [Mon, 23 Jun 2025 21:55:40 +0000 (14:55 -0700)]
Merge tag 'f2fs-for-6.16-rc4' of git://git./linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
- fix double-unlock introduced by the recent folio conversion
- fix stale page content beyond EOF complained by xfstests/generic/363
* tag 'f2fs-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix to zero post-eof page
f2fs: Fix __write_node_folio() conversion
Breno Leitao [Fri, 20 Jun 2025 18:48:55 +0000 (11:48 -0700)]
net: netpoll: Initialize UDP checksum field before checksumming
commit
f1fce08e63fe ("netpoll: Eliminate redundant assignment") removed
the initialization of the UDP checksum, which was wrong and broke
netpoll IPv6 transmission due to bad checksumming.
udph->check needs to be set before calling csum_ipv6_magic().
Fixes:
f1fce08e63fe ("netpoll: Eliminate redundant assignment")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250620-netpoll_fix-v1-1-f9f0b82bc059@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 23 Jun 2025 18:16:38 +0000 (11:16 -0700)]
Merge tag 'for-6.16-rc3-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes:
- fix invalid inode pointer dereferences during log replay
- fix a race between renames and directory logging
- fix shutting down delayed iput worker
- fix device byte accounting when dropping chunk
- in zoned mode, fix offset calculations for DUP profile when
conventional and sequential zones are used together
Regression fixes:
- fix possible double unlock of extent buffer tree (xarray
conversion)
- in zoned mode, fix extent buffer refcount when writing out extents
(xarray conversion)
Error handling fixes and updates:
- handle unexpected extent type when replaying log
- check and warn if there are remaining delayed inodes when putting a
root
- fix assertion when building free space tree
- handle csum tree error with mount option 'rescue=ibadroot'
Other:
- error message updates: add prefix to all scrub related messages,
include other information in messages"
* tag 'for-6.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix alloc_offset calculation for partly conventional block groups
btrfs: handle csum tree error with rescue=ibadroots correctly
btrfs: fix race between async reclaim worker and close_ctree()
btrfs: fix assertion when building free space tree
btrfs: don't silently ignore unexpected extent type when replaying log
btrfs: fix invalid inode pointer dereferences during log replay
btrfs: fix double unlock of buffer_tree xarray when releasing subpage eb
btrfs: update superblock's device bytes_used when dropping chunk
btrfs: fix a race between renames and directory logging
btrfs: scrub: add prefix for the error messages
btrfs: warn if leaking delayed_nodes in btrfs_put_root()
btrfs: fix delayed ref refcount leak in debug assertion
btrfs: include root in error message when unlinking inode
btrfs: don't drop a reference if btrfs_check_write_meta_pointer() fails
Yuan Chen [Wed, 18 Jun 2025 01:19:33 +0000 (09:19 +0800)]
libbpf: Fix null pointer dereference in btf_dump__free on allocation failure
When btf_dump__new() fails to allocate memory for the internal hashmap
(btf_dump->type_names), it returns an error code. However, the cleanup
function btf_dump__free() does not check if btf_dump->type_names is NULL
before attempting to free it. This leads to a null pointer dereference
when btf_dump__free() is called on a btf_dump object.
Fixes:
351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250618011933.11423-1-chenyuan_fl@163.com
Al Viro [Sun, 22 Jun 2025 22:03:29 +0000 (18:03 -0400)]
attach_recursive_mnt(): do not lock the covering tree when sliding something under it
If we are propagating across the userns boundary, we need to lock the
mounts added there. However, in case when something has already
been mounted there and we end up sliding a new tree under that,
the stuff that had been there before should not get locked.
IOW, lock_mnt_tree() should be called before we reparent the
preexisting tree on top of what we are adding.
Fixes:
3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Tue, 17 Jun 2025 04:09:51 +0000 (00:09 -0400)]
replace collect_mounts()/drop_collected_mounts() with a safer variant
collect_mounts() has several problems - one can't iterate over the results
directly, so it has to be done with callback passed to iterate_mounts();
it has an oopsable race with d_invalidate(); it creates temporary clones
of mounts invisibly for sync umount (IOW, you can have non-lazy umount
succeed leaving filesystem not mounted anywhere and yet still busy).
A saner approach is to give caller an array of struct path that would pin
every mount in a subtree, without cloning any mounts.
* collect_mounts()/drop_collected_mounts()/iterate_mounts() is gone
* collect_paths(where, preallocated, size) gives either ERR_PTR(-E...) or
a pointer to array of struct path, one for each chunk of tree visible under
'where' (i.e. the first element is a copy of where, followed by (mount,root)
for everything mounted under it - the same set collect_mounts() would give).
Unlike collect_mounts(), the mounts are *not* cloned - we just get pinning
references to the roots of subtrees in the caller's namespace.
Array is terminated by {NULL, NULL} struct path. If it fits into
preallocated array (on-stack, normally), that's where it goes; otherwise
it's allocated by kmalloc_array(). Passing 0 as size means that 'preallocated'
is ignored (and expected to be NULL).
* drop_collected_paths(paths, preallocated) is given the array returned
by an earlier call of collect_paths() and the preallocated array passed to that
call. All mount/dentry references are dropped and array is kfree'd if it's not
equal to 'preallocated'.
* instead of iterate_mounts(), users should just iterate over array
of struct path - nothing exotic is needed for that. Existing users (all in
audit_tree.c) are converted.
[folded a fix for braino reported by Venkat Rao Bagalkote <venkat88@linux.ibm.com>]
Fixes:
80b5dce8c59b0 ("vfs: Add a function to lazily unmount all mounts from any dentry")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Mon, 23 Jun 2025 16:20:39 +0000 (09:20 -0700)]
Merge tag 'mm-hotfixes-stable-2025-06-22-18-52' of git://git./linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 7 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels. Only 4 are
for MM.
- The series `Revert "bcache: update min_heap_callbacks to use
default builtin swap"' from Kuan-Wei Chiu backs out the author's
recent min_heap changes due to a performance regression.
A fix for this regression has been developed but we felt it best to
go back to the known-good version to give the new code more bake
time.
- A lot of MAINTAINERS maintenance.
I like to get these changes upstreamed promptly because they can't
break things and more accurate/complete MAINTAINERS info hopefully
improves the speed and accuracy of our responses to submitters and
reporters"
* tag 'mm-hotfixes-stable-2025-06-22-18-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add additional mmap-related files to mmap section
MAINTAINERS: add memfd, shmem quota files to shmem section
MAINTAINERS: add stray rmap file to mm rmap section
MAINTAINERS: add hugetlb_cgroup.c to hugetlb section
MAINTAINERS: add further init files to mm init block
MAINTAINERS: update maintainers for HugeTLB
maple_tree: fix MA_STATE_PREALLOC flag in mas_preallocate()
MAINTAINERS: add missing test files to mm gup section
MAINTAINERS: add missing mm/workingset.c file to mm reclaim section
selftests/mm: skip uprobe vma merge test if uprobes are not enabled
bcache: remove unnecessary select MIN_HEAP
Revert "bcache: remove heap-related macros and switch to generic min_heap"
Revert "bcache: update min_heap_callbacks to use default builtin swap"
selftests/mm: add configs to fix testcase failure
kho: initialize tail pages for higher order folios properly
MAINTAINERS: add linux-mm@ list to Kexec Handover
mm: userfaultfd: fix race of userfaultfd_move and swap cache
mm/gup: revert "mm: gup: fix infinite loop within __get_longterm_locked"
selftests/mm: increase timeout from 180 to 900 seconds
mm/shmem, swap: fix softlockup with mTHP swapin
Takashi Iwai [Mon, 23 Jun 2025 15:18:39 +0000 (17:18 +0200)]
ALSA: hda/realtek: Add mic-mute LED setup for ASUS UM5606
ASUS UM5606* models use the quirk to set up the bass speakers, but it
missed the mic-mute LED configuration. Other similar models have the
AMD ACP dmic, and the mic-mute is set up for that, but those models
don't have AMD ACP but rather built-in mics of Realtek codec, hence
the Realtek driver should set it up, instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220125
Link: https://patch.msgid.link/20250623151841.28810-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Youngjun Lee [Mon, 23 Jun 2025 11:05:25 +0000 (20:05 +0900)]
ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3()
In snd_usb_get_audioformat_uac3(), the length value returned from
snd_usb_ctl_msg() is used directly for memory allocation without
validation. This length is controlled by the USB device.
The allocated buffer is cast to a uac3_cluster_header_descriptor
and its fields are accessed without verifying that the buffer
is large enough. If the device returns a smaller than expected
length, this leads to an out-of-bounds read.
Add a length check to ensure the buffer is large enough for
uac3_cluster_header_descriptor.
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com>
Fixes:
9a2fe9b801f5 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Link: https://patch.msgid.link/20250623-uac3-oob-fix-v1-1-527303eaf40a@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Chiu [Mon, 23 Jun 2025 06:30:23 +0000 (14:30 +0800)]
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 6 G1a
HP EliteBook 6 G1a laptops use ALC236 codec and need the fixup
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF to make the mic/micmute LEDs
work.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Link: https://patch.msgid.link/20250623063023.374920-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kuniyuki Iwashima [Tue, 17 Jun 2025 16:58:13 +0000 (09:58 -0700)]
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit
587ae086f6e4 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr
ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted
6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007fcf5c7b9038 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
00007fcf5bbb6160 RCX:
00007fcf5b98e929
RDX:
0000000000000000 RSI:
00000000400448cb RDI:
0000000000000009
RBP:
00007fcf5ba10b39 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
0000000000000000 R14:
00007fcf5bbb6160 R15:
00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/namei.c:4046
do_filp_open+0x1fa/0x410 fs/namei.c:4073
do_sys_openat2+0x121/0x1c0 fs/open.c:1437
do_sys_open fs/open.c:1452 [inline]
__do_sys_openat fs/open.c:1468 [inline]
__se_sys_openat fs/open.c:1463 [inline]
__x64_sys_openat+0x138/0x170 fs/open.c:1463
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x18e/0x440 mm/slub.c:4842
vhci_release+0xbc/0xd0 drivers/bluetooth/hci_vhci.c:671
__fput+0x44c/0xa70 fs/file_table.c:465
task_work_run+0x1d1/0x260 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x6ad/0x22e0 kernel/exit.c:955
do_group_exit+0x21c/0x2d0 kernel/exit.c:1104
__do_sys_exit_group kernel/exit.c:1115 [inline]
__se_sys_exit_group kernel/exit.c:1113 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1113
x64_sys_call+0x21ba/0x21c0 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at
ffff88807cb8d800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 88 bytes inside of
freed 1024-byte region [
ffff88807cb8d800,
ffff88807cb8dc00)
Fixes:
bf18c7118cf8 ("Bluetooth: vhci: Free driver_data on file release")
Reported-by: syzbot+2faa4825e556199361f9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
f62d64848fc4c7c30cd6
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fengnan Chang [Mon, 23 Jun 2025 11:02:18 +0000 (19:02 +0800)]
io_uring: make fallocate be hashed work
Like ftruncate and write, fallocate operations on the same file cannot
be executed in parallel, so it is better to make fallocate be hashed
work.
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Link: https://lore.kernel.org/r/20250623110218.61490-1-changfengnan@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Heinz Mauelshagen [Tue, 10 Jun 2025 18:53:30 +0000 (20:53 +0200)]
dm-raid: fix variable in journal device check
Replace "rdev" with correct loop variable name "r".
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
63c32ed4afc2 ("dm raid: add raid4/5/6 journaling support")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Arnd Bergmann [Fri, 20 Jun 2025 13:09:53 +0000 (15:09 +0200)]
net: qed: reduce stack usage for TLV processing
clang gets a bit confused by the code in the qed_mfw_process_tlv_req and
ends up spilling registers to the stack hundreds of times. When sanitizers
are enabled, this can end up blowing the stack warning limit:
drivers/net/ethernet/qlogic/qed/qed_mng_tlv.c:1244:5: error: stack frame size (1824) exceeds limit (1280) in 'qed_mfw_process_tlv_req' [-Werror,-Wframe-larger-than]
Apparently the problem is the complexity of qed_mfw_update_tlvs()
after inlining, and marking the four main branches of that function
as noinline_for_stack makes this problem completely go away, the stack
usage goes down to 100 bytes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vijendar Mukunda [Mon, 23 Jun 2025 08:44:55 +0000 (14:14 +0530)]
ASoC: amd: ps: fix for soundwire failures during hibernation exit sequence
During the hibernate entry sequence, ACP registers will be reset to
default values and acp ip will be completely powered off including acp
SoundWire pads. During resume sequence, if acp SoundWire pad keeper enable
register is not restored along with pad pulldown control register value,
then SoundWire manager links won't be powered on correctly results in
peripheral register access failures and completely audio function is
broken.
Add code to store the acp SoundWire pad keeper enable register and acp pad
pulldown ctrl register values before entering into suspend state and
restore the register values during resume sequence based on condition check
for acp SoundWire pad keeper enable register for ACP6.3, ACP7.0 & ACP7.1
platforms.
Fixes:
491628388005 ("ASoC: amd: ps: add callback functions for acp pci driver pm ops")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20250623084630.3100279-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Herbert Xu [Mon, 23 Jun 2025 11:11:50 +0000 (19:11 +0800)]
dm-crypt: Extend state buffer size in crypt_iv_lmk_one
Add a macro CRYPTO_MD5_STATESIZE for the Crypto API export state
size of md5 and use that in dm-crypt instead of relying on the
size of struct md5_state (the latter is currently undergoing a
transition and may shrink).
This commit fixes a crash on 32-bit machines:
Oops: Oops: 0000 [#1] SMP
CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.16.0-rc2+ #993 PREEMPT(full)
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Workqueue: kcryptd-254:0-1 kcryptd_crypt [dm_crypt]
EIP: __crypto_shash_export+0xf/0x90
Code: 4a c1 c7 40 20 a0 b4 4a c1 81 cf 0e 00 04 08 89 78 50 e9 2b ff ff ff 8d 74 26 00 55 89 e5 57 56 53 89 c3 89 d6 8b 00 8b 40 14 <8b> 50 fc f6 40 13 01 74 04 4a 2b 50 14 85 c9 74 10 89 f2 89 d8 ff
EAX:
303a3435 EBX:
c3007c90 ECX:
00000000 EDX:
c3007c38
ESI:
c3007c38 EDI:
c3007c90 EBP:
c3007bfc ESP:
c3007bf0
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS:
00010216
CR0:
80050033 CR2:
303a3431 CR3:
04fbe000 CR4:
00350e90
Call Trace:
crypto_shash_export+0x65/0xc0
crypt_iv_lmk_one+0x106/0x1a0 [dm_crypt]
Fixes:
efd62c85525e ("crypto: md5-generic - Use API partial block handling")
Reported-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Milan Broz <gmazyland@gmail.com>
Closes: https://lore.kernel.org/linux-crypto/
f1625ddc-e82e-4b77-80c2-
dc8e45b54848@gmail.com/T/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Herbert Xu [Fri, 20 Jun 2025 12:15:03 +0000 (20:15 +0800)]
crypto: wp512 - Use API partial block handling
Use the Crypto API partial block handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Oliver Schramm [Sat, 21 Jun 2025 22:30:01 +0000 (00:30 +0200)]
ASoC: amd: yc: Add DMI quirk for Lenovo IdeaPad Slim 5 15
It's smaller brother has already received the patch to enable the microphone,
now add it too to the DMI quirk table.
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Schramm <oliver.schramm97@gmail.com>
Link: https://patch.msgid.link/20250621223000.11817-2-oliver.schramm97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Yuzuru10 [Sun, 22 Jun 2025 22:58:00 +0000 (22:58 +0000)]
ASoC: amd: yc: add quirk for Acer Nitro ANV15-41 internal mic
This patch adds DMI-based quirk for the Acer Nitro ANV15-41,
allowing the internal microphone to be detected correctly on
machines with "RB" as board vendor.
Signed-off-by: Yuzuru <yuzuru_10@proton.me>
Link: https://patch.msgid.link/20250622225754.20856-1-yuzuru_10@proton.me
Signed-off-by: Mark Brown <broonie@kernel.org>
Luca Weiss [Tue, 17 Jun 2025 12:20:12 +0000 (14:20 +0200)]
ASoC: qcom: sm8250: Fix possibly undefined reference
With CONFIG_SND_SOC_SM8250=y and CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS=m
selected in kconfig, the build will fail due to trying to link against a
symbol only found in the module.
aarch64-linux-gnu-ld: sound/soc/qcom/sm8250.o: in function `sm8250_snd_exit':
sound/soc/qcom/sm8250.c:52:(.text+0x210): undefined reference to `qcom_snd_usb_offload_jack_remove'
Fix this by declaring the dependency that forces CONFIG_SND_SOC_SM8250=m
when CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS is =m.
Reported-by: Matthew Croughan <matthew.croughan@nix.how>
Fixes:
1b8d0d87b934 ("ASoC: qcom: qdsp6: Add headphone jack for offload connection status")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250617-snd-sm8250-dep-fix-v1-1-879af8906ec4@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>