Linus Torvalds [Fri, 23 Oct 2020 16:59:25 +0000 (09:59 -0700)]
Merge tag 'arc-5.10-rc1-fixes' of git://git./linux/kernel/git/vgupta/arc
Pull ARC fix from Vineet Gupta:
"I found a snafu in perf driver which made it into 5.9-rc4 and the fix
should go in now than wait"
* tag 'arc-5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: perf: redo the pct irq missing in device-tree handling
Linus Torvalds [Fri, 23 Oct 2020 16:46:16 +0000 (09:46 -0700)]
Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux
Pull more arm64 updates from Will Deacon:
"A small selection of further arm64 fixes and updates. Most of these
are fixes that came in during the merge window, with the exception of
the HAVE_MOVE_PMD mremap() speed-up which we discussed back in 2018
and somehow forgot to enable upstream.
- Improve performance of Spectre-v2 mitigation on Falkor CPUs (if
you're lucky enough to have one)
- Select HAVE_MOVE_PMD. This has been shown to improve mremap()
performance, which is used heavily by the Android runtime GC, and
it seems we forgot to enable this upstream back in 2018.
- Ensure linker flags are consistent between LLVM and BFD
- Fix stale comment in Spectre mitigation rework
- Fix broken copyright header
- Fix KASLR randomisation of the linear map
- Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)"
Link: https://lore.kernel.org/kvmarm/20181108181201.88826-3-joelaf@google.com/
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: proton-pack: Update comment to reflect new function name
arm64: spectre-v2: Favour CPU-specific mitigation at EL2
arm64: link with -z norelro regardless of CONFIG_RELOCATABLE
arm64: Fix a broken copyright header in gen_vdso_offsets.sh
arm64: mremap speedup - Enable HAVE_MOVE_PMD
arm64: mm: use single quantity to represent the PA to VA translation
arm64: reject prctl(PR_PAC_RESET_KEYS) on compat tasks
Linus Torvalds [Thu, 22 Oct 2020 20:20:39 +0000 (13:20 -0700)]
Merge tag 'kconfig-v5.10' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- Remove unused or useless code from qconf
- Allow to edit "int", "hex", "string" options in place, and remove the
separate edit box from qconf
* tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: create QApplication after option checks
kconfig: qconf: remove Y, M, N columns
kconfig: qconf: remove ConfigView class
kconfig: qconf: move setShowName/Range() to ConfigList from ConfigView
kconfig: qconf: remove ConfigLineEdit class
kconfig: qconf: allow to edit "int", "hex", "string" menus in-place
kconfig: qconf: show data column all the time
kconfig: qconf: move ConfigView::updateList(All) to ConfigList class
kconfig: qconf: remove unused ConfigItem::okRename()
kconfig: qconf: update the intro message to match to the current code
kconfig: qconf: reformat the intro message
Linus Torvalds [Thu, 22 Oct 2020 20:13:57 +0000 (13:13 -0700)]
Merge tag 'kbuild-v5.10' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
Linus Torvalds [Thu, 22 Oct 2020 20:08:57 +0000 (13:08 -0700)]
Merge tag 'modules-for-v5.10' of git://git./linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Code cleanups: more informative error messages and statically
initialize init_free_wq to avoid a workqueue warning"
* tag 'modules-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: statically initialize init section freeing data
module: Add more error message for failed kernel module loading
Linus Torvalds [Thu, 22 Oct 2020 20:00:44 +0000 (13:00 -0700)]
Merge tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- New fsl-mc vfio bus driver supporting userspace drivers of objects
within NXP's DPAA2 architecture (Diana Craciun)
- Support for exposing zPCI information on s390 (Matthew Rosato)
- Fixes for "detached" VFs on s390 (Matthew Rosato)
- Fixes for pin-pages and dma-rw accesses (Yan Zhao)
- Cleanups and optimize vconfig regen (Zenghui Yu)
- Fix duplicate irq-bypass token registration (Alex Williamson)
* tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits)
vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
vfio/pci: Clear token on bypass registration failure
vfio/fsl-mc: fix the return of the uninitialized variable ret
vfio/fsl-mc: Fix the dead code in vfio_fsl_mc_set_irq_trigger
vfio/fsl-mc: Fixed vfio-fsl-mc driver compilation on 32 bit
MAINTAINERS: Add entry for s390 vfio-pci
vfio-pci/zdev: Add zPCI capabilities to VFIO_DEVICE_GET_INFO
vfio/fsl-mc: Add support for device reset
vfio/fsl-mc: Add read/write support for fsl-mc devices
vfio/fsl-mc: trigger an interrupt via eventfd
vfio/fsl-mc: Add irq infrastructure for fsl-mc devices
vfio/fsl-mc: Added lock support in preparation for interrupt handling
vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions
vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call
vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl
vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind
vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFO
s390/pci: track whether util_str is valid in the zpci_dev
s390/pci: stash version in the zpci_dev
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices
...
Linus Torvalds [Thu, 22 Oct 2020 19:58:21 +0000 (12:58 -0700)]
Merge tag 'rpmsg-v5.10' of git://git./linux/kernel/git/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This introduces rpmsg_char support for GLINK and fixes a few issues"
* tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: glink: Expose rpmsg name attr for glink
rpmsg: glink: Add support for rpmsg glink chrdev
rpmsg: Guard against null endpoint ops in destroy
rpmsg: glink: Use complete_all for open states
rpmsg: virtio: fix compilation warning for virtio_rpmsg_channel description
rpmsg: Avoid double-free in mtk_rpmsg_register_device
rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()
Linus Torvalds [Thu, 22 Oct 2020 19:56:33 +0000 (12:56 -0700)]
Merge tag 'rproc-v5.10' of git://git./linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for the Mediatek MT9182 SCP and controlling
the Cortex R5F processors found in TI K3 platforms. It clones the
longstanding debugfs interface for controlling crash handling to
sysfs. Lastly it solves a bug where after a warm reset of Qualcomm
platforms the modem would crash upon first boot"
* tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
remoteproc/mediatek: Remove non-standard dsb()
remoteproc: Add recovery configuration to the sysfs interface
remoteproc: Add coredump as part of sysfs interface
remoteproc: Change default dump configuration to "disabled"
remoteproc: k3-r5: Add loading support for on-chip SRAM regions
remoteproc: k3-r5: Initialize TCM memories for ECC
remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem
dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs
remoteproc/mediatek: Add support for mt8192 SCP
remoteproc: Fixup coredump debugfs disable request
remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot
remoteproc/mediatek: fix null pointer dereference on null scp pointer
remoteproc: stm32: Fix pointer assignement
remoteproc: scp: add COMPILE_TEST dependency
Linus Torvalds [Thu, 22 Oct 2020 19:53:28 +0000 (12:53 -0700)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This contains no changes to the core framework. It is a collection of
various clk driver updates.
The biggest driver updates in terms of lines of code is the Allwinner
driver, closely followed by the Qualcomm and Mediatek drivers. All of
those hit high because we add so many lines of clk data. Coming in
fourth place is i.MX which also adds a bunch of clk data. This
accounts for the new driver additions this time around.
Otherwise the patches are lots of little cleanups and fixes for
various clk drivers that have baked in linux-next for a while. I
suppose one highlight or theme is that more clk drivers are being
updated to work as modules, which is interesting to see such critical
SoC infrastructure work as a loadable module.
New Drivers:
- Support qcom SM8150/SM8250 video and display clks
- Support Mediatek MT8167 clks
- Add clock for CRC block found on vf610 SoCs
- Add support for the Renesas R-Car V3U (R8A779A0) SoC
- Add support for the VSP for Resizing clock on Renesas RZ/G1H
- Support Allwinner A100 SoC clks
Removed Drivers:
- Remove i.MX21 clock driver, as i.MX21 platform support is being
dropped
Updates:
- Change how qcom's display port clks work
- Small non-critical fixes for TI clk driver
- Remove various unused variables in clk drivers
- Allow Rockchip clk driver to be a module
- Remove most __clk_lookup() calls in Samsung drivers (yay!)
- Support building i.MX ARMv8 platforms clock driver as module
- Some kerneldoc fixes here and there
- A couple of minor i.MX clk data corrections
- Update audio clock inverter and fdiv2 flag on Amlogic g12
- Make amlogic clk drivers configurable in Kconfig
- Fix Renesas VSP clock names to match corrected hardware
documentation
- Sigma-delta modulation on Allwinner R40
- Various fixes for at91 clk driver
- Use semicolons instead of commas in some places
- Mark some variables const so they can move to RO memory"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits)
clk: imx8mq: Fix usdhc parents order
clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
clk: Restrict CLK_HSDK to ARC_SOC_HSDK
clk: at91: sam9x60: support only two programmable clocks
clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
clk: ingenic: Use readl_poll_timeout instead of custom loop
clk: ingenic: Use to_clk_info() macro for all clocks
clk: bcm2835: add missing release if devm_clk_hw_register fails
clk: at91: clk-sam9x60-pll: remove unused variable
clk: at91: clk-main: update key before writing AT91_CKGR_MOR
clk: at91: remove the checking of parent_name
clk: clk-prima2: fix return value check in prima2_clk_init()
clk: mmp2: Fix the display clock divider base
clk: pxa: Constify static struct clk_ops
clk: baikal-t1: Mark Ethernet PLL as critical
clk: qoriq: modify MAX_PLL_DIV to 32
clk: axi-clkgen: Set power bits for fractional mode
clk: axi-clkgen: Add support for fractional dividers
...
Linus Torvalds [Thu, 22 Oct 2020 19:51:32 +0000 (12:51 -0700)]
Merge tag 'pwm/for-5.10-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This release cycle's updates are mostly cleanup and some minor fixes"
* tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support
dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support
pwm: Allow store 64-bit duty cycle from sysfs interface
pwm: img: Fix null pointer access in probe
pwm: pca9685: Disable unused alternative addresses
pwm: pca9685: Use BIT() macro instead of shift
pwm: pca9685: Make comments more consistent
pwm: sun4i: Simplify with dev_err_probe()
pwm: sprd: Simplify with dev_err_probe()
pwm: sifive: Simplify with dev_err_probe()
pwm: rockchip: Simplify with dev_err_probe()
pwm: jz4740: Simplify with dev_err_probe()
pwm: bcm2835: Simplify with dev_err_probe()
pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro
pwm: rockchip: Keep enabled PWMs running while probing
dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support
Linus Torvalds [Thu, 22 Oct 2020 19:41:00 +0000 (12:41 -0700)]
Merge tag 'pci-v5.10-changes' of git://git./linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
Liu)
- Add schedule point in pci_read_config() to reduce max latency
(Jiang Biao)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
Resource management:
- Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
Pieralisi)
PCIe native device hotplug:
- Reduce noisiness on hot removal (Lukas Wunner)
Power management:
- Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
that was done on the basis of spec typo (Bjorn Helgaas)
- Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
ambiguity (Krzysztof Wilczyński)
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
IOMMU:
- Enable Translation Blocking for external devices to harden against
DMA attacks (Rajat Jain)
Error handling:
- Add an ACPI APEI notifier chain for vendor CPER records to enable
device-specific error handling (Shiju Jose)
ASPM:
- Remove struct aspm_register_info to simplify code (Saheed O.
Bolarinwa)
Amlogic Meson PCIe controller driver:
- Build as module by default (Kevin Hilman)
Ampere Altra PCIe controller driver:
- Add MCFG quirk to work around non-standard ECAM implementation
(Tuan Phan)
Broadcom iProc PCIe controller driver:
- Set affinity mask on MSI interrupts (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for more Brcmstb chips (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add control of rescal reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Use dev_err_probe() to reduce redundant messages (Anson Huang)
Freescale Layerscape PCIe controller driver:
- Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
- Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint test support for lS1088a (Xiaowei Bao)
- Add MSI-X support for ls1088a (Xiaowei Bao)
HiSilicon HIP PCIe controller driver:
- Handle HIP-specific errors via ACPI APEI (Yicong Yang)
HiSilicon Kirin PCIe controller driver:
- Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)
Intel VMD host bridge driver:
- Factor out physical offset, bus offset, IRQ domain, IRQ allocation
(Jon Derrick)
- Use generic PCI PM correctly (Jon Derrick)
Marvell Aardvark PCIe controller driver:
- Fix compilation on s390 (Pali Rohár)
- Implement driver 'remove' function and allow to build it as module
(Pali Rohár)
- Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
- Convert mvebu a3700 internal SMCC firmware return codes to errno
(Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Stop checking return value of debugfs_create() functions (Greg
Kroah-Hartman)
- Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)
Qualcomm PCIe controller driver:
- Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)
Renesas R-Car PCIe controller driver:
- Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
(Lad Prabhakar)
- Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
- Add DT support for r8a7742 (Lad Prabhakar)
Socionext UniPhier Pro5 controller driver:
- Add DT descriptions of iATU register (host and endpoint) (Kunihiko
Hayashi)
Synopsys DesignWare PCIe controller driver:
- Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
unavoidable) (Hou Zhiqiang)
- Fix endpoint Header Type check so multi-function devices work (Hou
Zhiqiang)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Stop leaking MSI page in suspend/resume (Jisheng Zhang)
- Add common iATU register support instead of keystone-specific code
(Kunihiko Hayashi)
- Major config space access and other cleanups in dwc core and
drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
kirin, meson, qcom, tegra) (Rob Herring)
- Add multiple PFs support for endpoint (Xiaowei Bao)
- Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)
Miscellaneous:
- Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
- Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
- Fix "cast truncates bits from constant value" warnings (Gustavo
Pimentel)
- Remove redundant zeroing for sg_init_table() (Julia Lawall)
- Use scnprintf(), not snprintf(), in sysfs "show" functions
(Krzysztof Wilczyński)
- Remove unused assignments (Krzysztof Wilczyński)
- Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
Miao)
- Simplify return expressions (Qinglang Miao)"
* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
PCI: v3-semi: Remove unneeded break
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
PCI: dwc: Fix MSI page leakage in suspend/resume
...
Vineet Gupta [Thu, 22 Oct 2020 10:16:22 +0000 (03:16 -0700)]
ARC: perf: redo the pct irq missing in device-tree handling
commit
feb92d7d3813456c11dce21 "(ARC: perf: don't bail setup if pct irq
missing in device-tree)" introduced a silly brown-paper bag bug:
The assignment and comparison in an if statement were not bracketed
correctly leaving the order of evaluation undefined.
|
| if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
| ^^^ ^^^^
And given such a chance, the compiler will bite you hard, fully entitled
to generating this piece of beauty:
|
| # if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
|
| bl.d @platform_get_irq <-- irq returned in r0
|
| setge r2, r0, 0 <-- r2 is bool 1 or 0 if irq >= 0 true/false
| brlt.d r0, 0, @.L114
|
| st_s r2,[sp] <-- irq saved is bool 1 or 0, not actual return val
| st 1,[r3,160] # arc_pmu.18_29->irq <-- drops bool and assumes 1
|
| # return __request_percpu_irq(irq, handler, 0,
|
| bl.d @__request_percpu_irq;
| mov_s r0,1 <-- drops even bool and assumes 1 which fails
With the snafu fixed, everything is as expected.
| bl.d @platform_get_irq <-- returns irq in r0
|
| mov_s r2,r0
| brlt.d r2, 0, @.L112
|
| st_s r0,[sp] <-- irq isaved is actual return value above
| st r0,[r13,160] #arc_pmu.18_27->irq
|
| bl.d @__request_percpu_irq <-- r0 unchanged so actual irq returned
| add r4,r4,r12 #, tmp363, __ptr
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Linus Torvalds [Thu, 22 Oct 2020 17:31:08 +0000 (10:31 -0700)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The siginificant new ext4 feature this time around is Harshad's new
fast_commit mode.
In addition, thanks to Mauricio for fixing a race where mmap'ed pages
that are being changed in parallel with a data=journal transaction
commit could result in bad checksums in the failure that could cause
journal replays to fail.
Also notable is Ritesh's buffered write optimization which can result
in significant improvements on parallel write workloads. (The kernel
test robot reported a 330.6% improvement on fio.write_iops on a 96
core system using DAX)
Besides that, we have the usual miscellaneous cleanups and bug fixes"
Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
ext4: fix invalid inode checksum
ext4: add fast commit stats in procfs
ext4: add a mount opt to forcefully turn fast commits on
ext4: fast commit recovery path
jbd2: fast commit recovery path
ext4: main fast-commit commit path
jbd2: add fast commit machinery
ext4 / jbd2: add fast commit initialization
ext4: add fast_commit feature and handling for extended mount options
doc: update ext4 and journalling docs to include fast commit feature
ext4: Detect already used quota file early
jbd2: avoid transaction reuse after reformatting
ext4: use the normal helper to get the actual inode
ext4: fix bs < ps issue reported with dioread_nolock mount opt
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()
ext4: data=journal: fixes for ext4_page_mkwrite()
jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers()
jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers()
ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable()
ext4: use ext4_sb_bread() instead of sb_bread()
...
Linus Torvalds [Thu, 22 Oct 2020 16:59:21 +0000 (09:59 -0700)]
Merge branch 'work.set_fs' of git://git./linux/kernel/git/viro/vfs
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
Linus Torvalds [Thu, 22 Oct 2020 16:44:27 +0000 (09:44 -0700)]
Merge tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"The one new feature this time, from Anna Schumaker, is READ_PLUS,
which has the same arguments as READ but allows the server to return
an array of data and hole extents.
Otherwise it's a lot of cleanup and bugfixes"
* tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits)
NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
sunrpc: raise kernel RPC channel buffer size
svcrdma: fix bounce buffers for unaligned offsets and multiple pages
nfsd: remove unneeded break
net/sunrpc: Fix return value for sysctl sunrpc.transports
NFSD: Encode a full READ_PLUS reply
NFSD: Return both a hole and a data segment
NFSD: Add READ_PLUS hole segment encoding
NFSD: Add READ_PLUS data support
NFSD: Hoist status code encoding into XDR encoder functions
NFSD: Map nfserr_wrongsec outside of nfsd_dispatch
NFSD: Remove the RETURN_STATUS() macro
NFSD: Call NFSv2 encoders on error returns
NFSD: Fix .pc_release method for NFSv2
NFSD: Remove vestigial typedefs
NFSD: Refactor nfsd_dispatch() error paths
NFSD: Clean up nfsd_dispatch() variables
NFSD: Clean up stale comments in nfsd_dispatch()
NFSD: Clean up switch statement in nfsd_dispatch()
...
Linus Torvalds [Thu, 22 Oct 2020 16:39:29 +0000 (09:39 -0700)]
Merge tag 'exfat-for-5.10-rc1' of git://git./linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Replace memcpy with structure assignment
- Remove unneeded codes and use helper function i_blocksize()
- Fix typos found by codespell
* tag 'exfat-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: remove useless check in exfat_move_file()
exfat: remove 'rwoffset' in exfat_inode_info
exfat: replace memcpy with structure assignment
exfat: remove useless directory scan in exfat_add_entry()
exfat: eliminate dead code in exfat_find()
exfat: use i_blocksize() to get blocksize
exfat: fix misspellings using codespell tool
Linus Torvalds [Thu, 22 Oct 2020 16:33:20 +0000 (09:33 -0700)]
Merge tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"A couple of small fixes (loff_t overflow on 32bit, syzbot
uninitialized variable warning) and code cleanup (xen)"
* tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux:
net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid
9p/xen: Fix format argument warning
9P: Cast to loff_t before multiplying
Luo Meng [Tue, 20 Oct 2020 01:36:31 +0000 (09:36 +0800)]
ext4: fix invalid inode checksum
During the stability test, there are some errors:
ext4_lookup:1590: inode #6967: comm fsstress: iget: checksum invalid.
If the inode->i_iblocks too big and doesn't set huge file flag, checksum
will not be recalculated when update the inode information to it's buffer.
If other inode marks the buffer dirty, then the inconsistent inode will
be flushed to disk.
Fix this problem by checking i_blocks in advance.
Cc: stable@kernel.org
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20201020013631.3796673-1-luomeng12@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 15 Oct 2020 20:38:01 +0000 (13:38 -0700)]
ext4: add fast commit stats in procfs
This commit adds a file in procfs that tracks fast commit related
statistics.
root@kvm-xfstests:/mnt# cat /proc/fs/ext4/vdc/fc_info
fc stats:
7772 commits
15 ineligible
4083 numblks
2242us avg_commit_time
Ineligible reasons:
"Extended attributes changed": 0
"Cross rename": 0
"Journal flag changed": 0
"Insufficient memory": 0
"Swap boot": 0
"Resize": 0
"Dir renamed": 0
"Falloc range op": 0
"FC Commit Failed": 15
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-10-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 15 Oct 2020 20:38:00 +0000 (13:38 -0700)]
ext4: add a mount opt to forcefully turn fast commits on
This is a debug only mount option that forcefully turns fast commits
on at mount time.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-9-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 15 Oct 2020 20:37:59 +0000 (13:37 -0700)]
ext4: fast commit recovery path
This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 15 Oct 2020 20:37:58 +0000 (13:37 -0700)]
jbd2: fast commit recovery path
This patch adds fast commit recovery support in JBD2.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-7-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 15 Oct 2020 20:37:57 +0000 (13:37 -0700)]
ext4: main fast-commit commit path
This patch adds main fast commit commit path handlers. The overall
patch can be divided into two inter-related parts:
(A) Metadata updates tracking
This part consists of helper functions to track changes that need
to be committed during a commit operation. These updates are
maintained by Ext4 in different in-memory queues. Following are
the APIs and their short description that are implemented in this
patch:
- ext4_fc_track_link/unlink/creat() - Track unlink. link and creat
operations
- ext4_fc_track_range() - Track changed logical block offsets
inodes
- ext4_fc_track_inode() - Track inodes
- ext4_fc_mark_ineligible() - Mark file system fast commit
ineligible()
- ext4_fc_start_update() / ext4_fc_stop_update() /
ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These
functions are useful for co-ordinating inode updates with
commits.
(B) Main commit Path
This part consists of functions to convert updates tracked in
in-memory data structures into on-disk commits. Function
ext4_fc_commit() is the main entry point to commit path.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 15 Oct 2020 20:37:56 +0000 (13:37 -0700)]
jbd2: add fast commit machinery
This functions adds necessary APIs needed in JBD2 layer for fast
commits.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 15 Oct 2020 20:37:55 +0000 (13:37 -0700)]
ext4 / jbd2: add fast commit initialization
This patch adds fast commit area trackers in the journal_t
structure. These are initialized via the jbd2_fc_init() routine that
this patch adds. This patch also adds ext4/fast_commit.c and
ext4/fast_commit.h files for fast commit code that will be added in
subsequent patches in this series.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-4-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 15 Oct 2020 20:37:54 +0000 (13:37 -0700)]
ext4: add fast_commit feature and handling for extended mount options
We are running out of mount option bits. Add handling for using
s_mount_opt2. Add ext4 and jbd2 fast commit feature flag and also add
ability to turn off the fast commit feature in Ext4.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 15 Oct 2020 20:37:53 +0000 (13:37 -0700)]
doc: update ext4 and journalling docs to include fast commit feature
This patch adds necessary documentation for fast commits.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tetsuhiro Kohada [Fri, 11 Sep 2020 04:45:06 +0000 (13:45 +0900)]
exfat: remove useless check in exfat_move_file()
In exfat_move_file(), the identity of source and target directory has been
checked by the caller.
Also, it gets stream.start_clu from file dir-entry, which is an invalid
determination.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Tetsuhiro Kohada [Thu, 17 Sep 2020 01:39:16 +0000 (10:39 +0900)]
exfat: remove 'rwoffset' in exfat_inode_info
Remove 'rwoffset' in exfat_inode_info and replace it with the parameter of
exfat_readdir().
Since rwoffset is referenced only by exfat_readdir(), it is not necessary
a exfat_inode_info's member.
Also, change cpos to point to the next of entry-set, and return the index
of dir-entry via dir_entry->entry.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Tetsuhiro Kohada [Fri, 11 Sep 2020 04:45:19 +0000 (13:45 +0900)]
exfat: replace memcpy with structure assignment
Use structure assignment instead of memcpy.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Tetsuhiro Kohada [Fri, 11 Sep 2020 04:44:39 +0000 (13:44 +0900)]
exfat: remove useless directory scan in exfat_add_entry()
There is nothing in directory just created, so there is no need to scan.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Tetsuhiro Kohada [Wed, 2 Sep 2020 07:53:06 +0000 (16:53 +0900)]
exfat: eliminate dead code in exfat_find()
The exfat_find_dir_entry() called by exfat_find() doesn't return -EEXIST.
Therefore, the root-dir information setting is never executed.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Xianting Tian [Sat, 15 Aug 2020 10:57:07 +0000 (18:57 +0800)]
exfat: use i_blocksize() to get blocksize
We alreday has the interface i_blocksize() to get blocksize,
so use it.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Namjae Jeon [Fri, 14 Aug 2020 02:03:46 +0000 (11:03 +0900)]
exfat: fix misspellings using codespell tool
Sedat reported typos using codespell tool.
$ codespell fs/exfat/*.c | grep -v iput
fs/exfat/namei.c:293: upto ==> up to
fs/exfat/nls.c:14: tabel ==> table
$ codespell fs/exfat/*.h
fs/exfat/exfat_fs.h:133: usally ==> usually
Fix typos found by codespell.
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Linus Torvalds [Wed, 21 Oct 2020 18:28:43 +0000 (11:28 -0700)]
Merge tag 'linux-watchdog-5.10-rc1' of git://linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Toshiba Visconti watchdog driver
- it87_wdt: add IT8772 + IT8784
- several fixes and improvements
* tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Add Toshiba Visconti watchdog driver
watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device
watchdog: it87_wdt: add IT8784 ID
watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabled
watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3
watchdog: renesas_wdt: support handover from bootloader
watchdog: imx7ulp: Watchdog should continue running for wait/stop mode
watchdog: rti: Simplify with dev_err_probe()
watchdog: davinci: Simplify with dev_err_probe()
watchdog: cadence: Simplify with dev_err_probe()
watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h>
watchdog: Use put_device on error
watchdog: Fix memleak in watchdog_cdev_register
watchdog: imx7ulp: Strictly follow the sequence for wdog operations
watchdog: it87_wdt: add IT8772 ID
watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not needed
drivers: watchdog: rdc321x_wdt: Fix race condition bugs
Linus Torvalds [Wed, 21 Oct 2020 18:22:08 +0000 (11:22 -0700)]
Merge tag 'rtc-5.10' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A new driver this cycle is making the bulk of the changes and the
rx8010 driver has been rework to use the modern APIs.
Summary:
Subsystem:
- new generic DT properties: aux-voltage-chargeable,
trickle-voltage-millivolt
New driver:
- Microcrystal RV-3032
Drivers:
- ds1307: use aux-voltage-chargeable
- r9701, rx8010: modernization of the driver
- rv3028: fix clock output, trickle resistor values, RAM
configuration registers"
* tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: r9701: set range
rtc: r9701: convert to devm_rtc_allocate_device
rtc: r9701: stop setting RWKCNT
rtc: r9701: remove useless memset
rtc: r9701: stop setting a default time
rtc: r9701: remove leftover comment
rtc: rv3032: Add a driver for Microcrystal RV-3032
dt-bindings: rtc: rv3032: add RV-3032 bindings
dt-bindings: rtc: add trickle-voltage-millivolt
rtc: rv3028: ensure ram configuration registers are saved
rtc: rv3028: factorize EERD bit handling
rtc: rv3028: fix trickle resistor values
rtc: rv3028: fix clock output support
rtc: mt6397: Remove unused member dev
rtc: rv8803: simplify the return expression of rv8803_nvram_write
rtc: meson: simplify the return expression of meson_vrtc_probe
rtc: rx8010: rename rx8010_init_client() to rx8010_init()
rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally
rtc: ds1307: consider aux-voltage-chargeable
rtc: ds1307: store previous charge default per chip
...
Linus Torvalds [Wed, 21 Oct 2020 18:15:42 +0000 (11:15 -0700)]
Merge branch 'dmi-for-linus' of git://git./linux/kernel/git/jdelvare/staging
Pull dmi update from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
Replace HTTP links with HTTPS ones: DMI/SMBIOS SUPPORT
Linus Torvalds [Wed, 21 Oct 2020 17:54:05 +0000 (10:54 -0700)]
Merge branch 'i2c/for-5.10' of git://git./linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- if a host can be a client, too, the I2C core can now use it to
emulate SMBus HostNotify support (STM32 and R-Car added this so far)
- also for client mode, a testunit has been added. It can create rare
situations on the bus, so host controllers can be tested
- a binding has been added to mark the bus as "single-master". This
allows for better timeout detections
- new driver for Mellanox Bluefield
- massive refactoring of the Tegra driver
- EEPROMs recognized by the at24 driver can now have custom names
- rest is driver updates
* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits)
Documentation: i2c: add testunit docs to index
i2c: tegra: Improve driver module description
i2c: tegra: Clean up whitespaces, newlines and indentation
i2c: tegra: Clean up and improve comments
i2c: tegra: Clean up printk messages
i2c: tegra: Clean up variable names
i2c: tegra: Improve formatting of variables
i2c: tegra: Check errors for both positive and negative values
i2c: tegra: Factor out hardware initialization into separate function
i2c: tegra: Factor out register polling into separate function
i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()
i2c: tegra: Rename wait/poll functions
i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()
i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
i2c: tegra: Remove likely/unlikely from the code
i2c: tegra: Remove outdated barrier()
i2c: tegra: Clean up variable types
i2c: tegra: Reorder location of functions in the code
i2c: tegra: Clean up probe function
...
Linus Torvalds [Wed, 21 Oct 2020 17:34:10 +0000 (10:34 -0700)]
Merge tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
- a patch that removes crush_workspace_mutex (myself). CRUSH
computations are no longer serialized and can run in parallel.
- a couple new filesystem client metrics for "ceph fs top" command
(Xiubo Li)
- a fix for a very old messenger bug that affected the filesystem,
marked for stable (myself)
- assorted fixups and cleanups throughout the codebase from Jeff and
others.
* tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-client: (27 commits)
libceph: clear con->out_msg on Policy::stateful_server faults
libceph: format ceph_entity_addr nonces as unsigned
libceph: fix ENTITY_NAME format suggestion
libceph: move a dout in queue_con_delay()
ceph: comment cleanups and clarifications
ceph: break up send_cap_msg
ceph: drop separate mdsc argument from __send_cap
ceph: promote to unsigned long long before shifting
ceph: don't SetPageError on readpage errors
ceph: mark ceph_fmt_xattr() as printf-like for better type checking
ceph: fold ceph_update_writeable_page into ceph_write_begin
ceph: fold ceph_sync_writepages into writepage_nounlock
ceph: fold ceph_sync_readpages into ceph_readpage
ceph: don't call ceph_update_writeable_page from page_mkwrite
ceph: break out writeback of incompatible snap context to separate function
ceph: add a note explaining session reject error string
libceph: switch to the new "osd blocklist add" command
libceph, rbd, ceph: "blacklist" -> "blocklist"
ceph: have ceph_writepages_start call pagevec_lookup_range_tag
ceph: use kill_anon_super helper
...
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:44 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/xilinx'
- Remove leftover bridge initialization (Lorenzo Pieralisi)
* remotes/lorenzo/pci/xilinx:
PCI: xilinx-cpm: Remove leftover bridge initialization
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:44 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/xgene'
- Remove unused assignment (Krzysztof Wilczyński)
* remotes/lorenzo/pci/xgene:
PCI: xgene: Remove unused assignment to variable msi_val
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:44 +0000 (09:58 -0500)]
Merge branch 'pci/vmd'
- Add physical offset helper (Jon Derrick)
- Add bus offset configuration helper (Jon Derrick)
- Add IRQ domain configuration helper (Jon Derrick)
- Add IRQ allocation helper (Jon Derrick)
- Drop pci_save_state()/pci_restore_state() in favor of the PCI core PM
(Jon Derrick)
* pci/vmd:
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:43 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/tegra'
- Drop return value checking for debugfs_create() calls (Greg
Kroah-Hartman)
- Convert debugfs "ports" file to use DEFINE_SEQ_ATTRIBUTE() (Liu Shixin)
* remotes/lorenzo/pci/tegra:
PCI: tegra: Convert to use DEFINE_SEQ_ATTRIBUTE macro
PCI: tegra: No need to check return value of debugfs_create() functions
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:43 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/rcar'
- Document R8A774A1, R8A774B1, R8A774E1 endpoint support in DT (Lad
Prabhakar)
- Add R8A774A1, R8A774B1, R8A774E1 (RZ/G2M, RZ/G2N, RZ/G2H) IDs to endpoint
test (Lad Prabhakar)
- Add device tree support for R8A7742 (Lad Prabhakar)
- Use "fallthrough" pseudo-keyword (Gustavo A. R. Silva)
* remotes/lorenzo/pci/rcar:
dt-bindings: PCI: rcar: Add device tree support for r8a7742
PCI: rcar-gen2: Use fallthrough pseudo-keyword
misc: pci_endpoint_test: Add Device ID for RZ/G2H PCIe controller
dt-bindings: pci: rcar-pci-ep: Document r8a774e1
misc: pci_endpoint_test: Add Device ID for RZ/G2M and RZ/G2N PCIe controllers
dt-bindings: pci: rcar-pci-ep: Document r8a774a1 and r8a774b1
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:43 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/qcom'
- Make sure PCIe is reset before init to work around QSDK U-Boot issue
(Ansuel Smith)
- Set iproc affinity mask on MSI interrupts (Mark Tomlinson)
* remotes/lorenzo/pci/qcom:
PCI: qcom: Make sure PCIe is reset before init for rev 2.1.0
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:42 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/mvebu'
- Remove useless msi_controller pointer allocation (Lorenzo Pieralisi)
* remotes/lorenzo/pci/mvebu:
PCI: mvebu: Remove useless msi_controller pointer allocation
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:42 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/mobiveil'
- Simplify mobiveil_pcie_init_irq_domain() (Liu Shixin)
* remotes/lorenzo/pci/mobiveil:
PCI: mobiveil: Simplify mobiveil_pcie_init_irq_domain() return expression
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:41 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/meson'
- Add pci-meson module support and enable by default on ARCH_MESON (Kevin
Hilman)
* remotes/lorenzo/pci/meson:
PCI: meson: Build as module by default
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:41 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/loongson'
* remotes/lorenzo/pci/loongson:
PCI: loongson: Simplify loongson_pci_probe() return expression
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:41 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/kirin'
- Return -EPROBE_DEFER in case the gpio isn't ready (Bean Huo)
* remotes/lorenzo/pci/kirin:
PCI: kirin: Return -EPROBE_DEFER in case the gpio isn't ready
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:40 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/iproc'
- Set affinity mask on MSI interrupts (Mark Tomlinson)
- Simplify by using module_bcma_driver (Liu Shixin)
- Fix 'using integer as NULL pointer' warning (Krzysztof Wilczyński)
* remotes/lorenzo/pci/iproc:
PCI: iproc: Fix using plain integer as NULL pointer in iproc_pcie_pltfm_probe
PCI: iproc: Use module_bcma_driver to simplify the code
PCI: iproc: Set affinity mask on MSI interrupts
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:40 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/imx6'
- Use "fallthrough" pseudo-keyword (Gustavo A. R. Silva)
- Drop redundant error messages after devm_clk_get() (Anson Huang)
* remotes/lorenzo/pci/imx6:
PCI: imx6: Do not output error message when devm_clk_get() failed with -EPROBE_DEFER
PCI: imx6: Use fallthrough pseudo-keyword
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:39 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/hv'
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
* remotes/lorenzo/pci/hv:
PCI: hv: Fix hibernation in case interrupts are not re-created
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:39 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/dwc'
- Fix designware-ep Header Type check (Hou Zhiqiang)
- Use DBI accessors instead of own config accessors (Rob Herring)
- Allow overriding bridge pci_ops (Rob Herring)
- Allow root and child buses to have different pci_ops (Rob Herring)
- Add default dwc pci_ops.map_bus (Rob Herring)
- Use pci_ops for root config space accessors in al, exynos, histb,
keystone, kirin, meson, tegra (Rob Herring)
- Remove dwc own/other config accessor ops (Rob Herring)
- Use generic config accessors in dwc (Rob Herring)
- Also call .add_bus() callback for root bus (Rob Herring)
- Convert keystone .scan_bus() callback to use pci_ops.add_bus (Rob
Herring)
- Convert dwc to use pci_host_probe() (Rob Herring)
- Remove dwc root_bus pointer (Rob Herring)
- Remove storing of PCI resources in dwc-specific structs (Rob Herring)
- Simplify config space handling (Rob Herring)
- Drop keystone duplicated DT num-viewport handling (Rob Herring)
- Check CONFIG_PCI_MSI in dw_pcie_msi_init() instead of duplicating it in
all the drivers (Rob Herring)
- Remove imx6 duplicate PCIE_LINK_WIDTH_SPEED_CONTROL definition (Rob
Herring)
- Add dwc num_lanes for use when it's lacking from DT (Rob Herring)
- Ensure "Fast Link Mode" simulation environment setting is cleared (Rob
Herring)
- Drop meson duplicate number of lanes setup (Rob Herring)
- Drop meson unnecessary RC config space init (Rob Herring)
- Rework meson config and dwc port logic register accesses (Rob Herring)
- Use common PCI register definitions in imx6 and qcom (Rob Herring)
- Search for DesignWare PCIe Capability instead of hard-coding its location
(Rob Herring)
- Use common DesignWare register definitions in tegra (Rob Herring)
- Drop keystone unused DBI2 code (Rob Herring)
- Make dwc ATU accessors private (Rob Herring)
- Centralize link gen setting in dwc (Rob Herring)
- Set PORT_LINK_DLL_LINK_EN in common dwc setup code (Rob Herring)
- Drop intel-gw unnecessary DT 'device_type' checking (Rob Herring)
- Move intel-gw PCI_CAP_ID_EXP discovery to the single place it's used (Rob
Herring)
- Drop intel-gw unused max_width (Rob Herring)
- Move N_FTS (fast training sequence) setup to common dwc setup (Rob
Herring)
- Convert spear13xx, tegra194 to use DBI accessors (Rob Herring)
- Add multiple PFs support for DWC (Xiaowei Bao)
- Add MSI-X doorbell mode for endpoint mode (Xiaowei Bao)
- Update MSI/MSI-X capability management for endpoints (Xiaowei Bao)
- Add layerscape ls1088a and ls2088a compatible strings (Xiaowei Bao)
- Update layerscape MSI/MSI-X management (Xiaowei Bao)
- Use doorbell to support MSI-X on layerscape (Xiaowei Bao)
- Add layerscape endpoint mode support for ls1088a and ls2088a (Xiaowei
Bao)
- Add layerscape ls1088a node to DT (Xiaowei Bao)
- Add Freescale/Layerscape ls1088a to endpoint test (Xiaowei Bao)
- Add endpoint test driver data for Layerscape PCIe controllers (Hou
Zhiqiang)
- Fix 'cast truncates bits from constant value' warning (Gustavo Pimentel)
- Add uniphier iATU register description (Kunihiko Hayashi)
- Add common iATU register support (Kunihiko Hayashi)
- Remove keystone iATU register mapping in favor of generic dwc support
(Kunihiko Hayashi)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Fix MSI page leakage in suspend/resume (Jisheng Zhang)
- Check whether link is up before attempting config access (best-effort fix
even though it's racy) (Hou Zhiqiang)
* remotes/lorenzo/pci/dwc:
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI: dwc: Fix MSI page leakage in suspend/resume
PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabled
PCI: keystone: Remove iATU register mapping
PCI: dwc: Add common iATU register support
dt-bindings: PCI: uniphier-ep: Add iATU register description
dt-bindings: PCI: uniphier: Add iATU register description
PCI: dwc: Fix 'cast truncates bits from constant value'
misc: pci_endpoint_test: Add driver data for Layerscape PCIe controllers
misc: pci_endpoint_test: Add LS1088a in pci_device_id table
PCI: layerscape: Add EP mode support for ls1088a and ls2088a
PCI: layerscape: Modify the MSIX to the doorbell mode
PCI: layerscape: Modify the way of getting capability with different PEX
PCI: layerscape: Fix some format issue of the code
dt-bindings: pci: layerscape-pci: Add compatible strings for ls1088a and ls2088a
PCI: designware-ep: Modify MSI and MSIX CAP way of finding
PCI: designware-ep: Move the function of getting MSI capability forward
PCI: designware-ep: Add the doorbell mode of MSI-X in EP mode
PCI: designware-ep: Add multiple PFs support for DWC
PCI: dwc: Use DBI accessors
PCI: dwc: Move N_FTS setup to common setup
PCI: dwc/intel-gw: Drop unused max_width
PCI: dwc/intel-gw: Move getting PCI_CAP_ID_EXP offset to intel_pcie_link_setup()
PCI: dwc/intel-gw: Drop unnecessary checking of DT 'device_type' property
PCI: dwc: Set PORT_LINK_DLL_LINK_EN in common setup code
PCI: dwc: Centralize link gen setting
PCI: dwc: Make ATU accessors private
PCI: dwc: Remove read_dbi2 code
PCI: dwc/tegra: Use common Designware port logic register definitions
PCI: dwc: Remove hardcoded PCI_CAP_ID_EXP offset
PCI: dwc/qcom: Use common PCI register definitions
PCI: dwc/imx6: Use common PCI register definitions
PCI: dwc/meson: Rework PCI config and DW port logic register accesses
PCI: dwc/meson: Drop unnecessary RC config space initialization
PCI: dwc/meson: Drop the duplicate number of lanes setup
PCI: dwc: Ensure FAST_LINK_MODE is cleared
PCI: dwc: Add a 'num_lanes' field to struct dw_pcie
PCI: dwc/imx6: Remove duplicate define PCIE_LINK_WIDTH_SPEED_CONTROL
PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init()
PCI: dwc/keystone: Drop duplicated 'num-viewport'
PCI: dwc: Simplify config space handling
PCI: dwc: Remove storing of PCI resources
PCI: dwc: Remove root_bus pointer
PCI: dwc: Convert to use pci_host_probe()
PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus
PCI: Also call .add_bus() callback for root bus
PCI: dwc: Use generic config accessors
PCI: dwc: Remove dwc specific config accessor ops
PCI: dwc: histb: Use pci_ops for root config space accessors
PCI: dwc: exynos: Use pci_ops for root config space accessors
PCI: dwc: kirin: Use pci_ops for root config space accessors
PCI: dwc: meson: Use pci_ops for root config space accessors
PCI: dwc: tegra: Use pci_ops for root config space accessors
PCI: dwc: keystone: Use pci_ops for config space accessors
PCI: dwc: al: Use pci_ops for child config space accessors
PCI: dwc: Add a default pci_ops.map_bus for root port
PCI: dwc: Allow overriding bridge pci_ops
PCI: dwc: Use DBI accessors instead of own config accessors
PCI: Allow root and child buses to have different pci_ops
PCI: designware-ep: Fix the Header Type check
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:38 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/cadence'
- Remove obsolete path from comment (Flavio Suligoi)
- Simplify cdns_pcie_host_init_address_translation() (Qinglang Miao)
* remotes/lorenzo/pci/cadence:
PCI: cadence: Simplify cdns_pcie_host_init_address_translation() return expression
PCI: cadence-ep: Remove obsolete path from comment
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:38 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/brcmstb'
- Make PCIE_BRCMSTB depend on and default to ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for 7278, 7216, 7211, and new properties (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add control of RESCAL reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add bcm7211, bcm7216, bcm7445, bcm7278 to match list (Jim Quinlan)
* remotes/lorenzo/pci/brcmstb:
PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list
PCI: brcmstb: Set bus max burst size by chip type
PCI: brcmstb: Accommodate MSI for older chips
PCI: brcmstb: Set additional internal memory DMA viewport sizes
PCI: brcmstb: Add control of rescal reset
PCI: brcmstb: Add bcm7278 PERST# support
PCI: brcmstb: Add suspend and resume pm_ops
PCI: brcmstb: Add bcm7278 register info
dt-bindings: PCI: Add bindings for more Brcmstb chips
PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:37 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/aardvark'
- Fix s390 build error (Pali Rohár)
- Check for errors from pci_bridge_emul_init() (Pali Rohár)
- Export pci-bridge-emul functions for use by modules (Pali Rohár)
- Make aardvark driver modular (Pali Rohár)
- Move PCIe reset code to advk_pcie_train_link() (Pali Rohár)
- Convert internal SMCC firmware return codes to errno (Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár)
* remotes/lorenzo/pci/aardvark:
PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware
phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()
PCI: aardvark: Implement driver 'remove' function and allow to build it as module
PCI: pci-bridge-emul: Export API functions
PCI: aardvark: Check for errors from pci_bridge_emul_init() call
PCI: aardvark: Fix compilation on s390
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:37 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/arm'
- Remove unused msi_ctrl, io_optional and align_resource fields from ARM
struct hw_pci (Lorenzo Pieralisi)
* remotes/lorenzo/pci/arm:
ARM/PCI: Remove unused fields from struct hw_pci
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:37 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/pci-iomap'
- Remove useless __KERNEL__ preprocessor guard in sparc io_32.h (Lorenzo
Pieralisi)
- Move ioremap/iounmap declaration so it's visible in asm-generic/io.h
(Lorenzo Pieralisi)
- Fix memory leak in generic !CONFIG_GENERIC_IOMAP pci_iounmap()
implementation (Lorenzo Pieralisi)
* remotes/lorenzo/pci/pci-iomap:
asm-generic/io.h: Fix !CONFIG_GENERIC_IOMAP pci_iounmap() implementation
sparc32: Move ioremap/iounmap declaration before asm-generic/io.h include
sparc32: Remove useless io_32.h __KERNEL__ preprocessor guard
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:36 +0000 (09:58 -0500)]
Merge branch 'remotes/lorenzo/pci/apei'
- Add ACPI APEI notifier chain for unknown (vendor) CPER records (Shiju
Jose)
- Add handling of HiSilicon HIP PCIe controller errors (Yicong Yang)
* remotes/lorenzo/pci/apei:
PCI: hip: Add handling of HiSilicon HIP PCIe controller errors
ACPI / APEI: Add a notifier chain for unknown (vendor) CPER records
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:36 +0000 (09:58 -0500)]
Merge branch 'pci/misc'
- Remove unnecessary #includes (Gustavo Pimentel)
- Fix intel_mid_pci.c build error when !CONFIG_ACPI (Randy Dunlap)
- Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof
Wilczyński)
- Simplify pci-pf-stub by using module_pci_driver() (Liu Shixin)
- Print IRQ used by Link Bandwidth Notification (Dongdong Liu)
- Update sysfs mmap-related #ifdef comments (Clint Sbisa)
- Simplify pci_dev_reset_slot_function() (Lukas Wunner)
- Use "NULL" instead of "0" to fix sparse warnings (Gustavo Pimentel)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Drop double zeroing for P2PDMA sg_init_table() (Julia Lawall)
* pci/misc:
PCI: v3-semi: Remove unneeded break
PCI/P2PDMA: Drop double zeroing for sg_init_table()
PCI: Simplify bool comparisons
PCI: endpoint: Use "NULL" instead of "0" as a NULL pointer
PCI: Simplify pci_dev_reset_slot_function()
PCI: Update mmap-related #ifdef comments
PCI/LINK: Print IRQ number used by port
PCI/IOV: Simplify pci-pf-stub with module_pci_driver()
PCI: Use scnprintf(), not snprintf(), in sysfs "show" functions
x86/PCI: Fix intel_mid_pci.c build error when ACPI is not enabled
PCI: Remove unnecessary header includes
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:35 +0000 (09:58 -0500)]
Merge branch 'pci/pm'
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
- Rename pci_dev.d3_delay to d3hot_delay (Krzysztof Wilczyński)
- Apply D2 transition delay as microseconds, not milliseconds (Bjorn
Helgaas)
* pci/pm:
PCI/PM: Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
PCI/PM: Remove unused PCI_PM_BUS_WAIT
PCI/PM: Rename pci_dev.d3_delay to d3hot_delay
PCI/PM: Remove unused pcibios_pm_ops
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:35 +0000 (09:58 -0500)]
Merge branch 'pci/hotplug'
- Use for_each_child_of_node() and for_each_node_by_name() instead of
open-coding them (Qinglang Miao)
- Reduce pciehp noisiness on hot removal (Lukas Wunner)
- Remove unused assignment in shpchp (Krzysztof Wilczyński)
* pci/hotplug:
PCI: shpchp: Remove unused 'rc' assignment
PCI: pciehp: Reduce noisiness on hot removal
PCI: rpadlpar: Use for_each_child_of_node() and for_each_node_by_name()
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:34 +0000 (09:58 -0500)]
Merge branch 'pci/enumeration'
- Tone down message about missing optional MCFG (Jeremy Linton)
- Add schedule point in pci_read_config() (Jiang Biao)
- Add Ampere Altra SOC MCFG quirk (Tuan Phan)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
* pci/enumeration:
PCI: Add Kconfig options for MPS/MRRS strategy
PCI/ACPI: Add Ampere Altra SOC MCFG quirk
PCI: Add schedule point in pci_read_config()
PCI/ACPI: Tone down missing MCFG message
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:34 +0000 (09:58 -0500)]
Merge branch 'pci/aspm'
- Remove struct aspm_register_info (Saheed O. Bolarinwa)
- Remove struct pcie_link_state.l1ss (Saheed O. Bolarinwa)
* pci/aspm:
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
Bjorn Helgaas [Wed, 21 Oct 2020 14:58:34 +0000 (09:58 -0500)]
Merge branch 'pci/acs'
- Enable Translation Blocking for external devices (Rajat Jain)
* pci/acs:
PCI/ACS: Enable Translation Blocking for external devices
Jon Derrick [Thu, 6 Aug 2020 21:00:17 +0000 (17:00 -0400)]
PCI: vmd: Update VMD PM to correctly use generic PCI PM
The pci_save_state() call in vmd_suspend() can be performed by
pci_pm_suspend_irq(). This also allows VMD to benefit from the call into
pci_prepare_to_sleep().
The pci_restore_state() call in vmd_resume() was restoring state after
pci_pm_resume()::pci_restore_standard_config() had already restored state.
It's also been suspected that the config state should have been restored
before re-requesting IRQs instead of afterwards.
Remove the pci_save_state()/pci_restore_state() calls in
vmd_suspend()/vmd_resume() to allow proper flow through generic PCI core
Power Management code.
Link: https://lore.kernel.org/r/20200806210017.5654-1-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: You-Sheng Yang <vicamo.yang@canonical.com>
Dai Ngo [Mon, 19 Oct 2020 03:42:49 +0000 (23:42 -0400)]
NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
NFS_FS=y as dependency of CONFIG_NFSD_V4_2_INTER_SSC still have
build errors and some configs with NFSD=m to get NFS4ERR_STALE
error when doing inter server copy.
Added ops table in nfs_common for knfsd to access NFS client modules.
Fixes:
3ac3711adb88 ("NFSD: Fix NFS server build errors")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Stephen Boyd [Tue, 20 Oct 2020 21:45:44 +0000 (14:45 -0700)]
arm64: proton-pack: Update comment to reflect new function name
The function detect_harden_bp_fw() is gone after commit
d4647f0a2ad7
("arm64: Rewrite Spectre-v2 mitigation code"). Update this comment to
reflect the new state of affairs.
Fixes:
d4647f0a2ad7 ("arm64: Rewrite Spectre-v2 mitigation code")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201020214544.3206838-3-swboyd@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>
Linus Torvalds [Tue, 20 Oct 2020 21:39:37 +0000 (14:39 -0700)]
Merge tag 'xarray-5.9' of git://git.infradead.org/users/willy/xarray
Pull XArray updates from Matthew Wilcox:
- Fix the test suite after introduction of the local_lock
- Fix a bug in the IDA spotted by Coverity
- Change the API that allows the workingset code to delete a node
- Fix xas_reload() when dealing with entries that occupy multiple
indices
- Add a few more tests to the test suite
- Fix an unsigned int being shifted into an unsigned long
* tag 'xarray-5.9' of git://git.infradead.org/users/willy/xarray:
XArray: Fix xas_create_range for ranges above 4 billion
radix-tree: fix the comment of radix_tree_next_slot()
XArray: Fix xas_reload for multi-index entries
XArray: Add private interface for workingset node deletion
XArray: Fix xas_for_each_conflict documentation
XArray: Test marked multiorder iterations
XArray: Test two more things about xa_cmpxchg
ida: Free allocated bitmap in error path
radix tree test suite: Fix compilation
Linus Torvalds [Tue, 20 Oct 2020 20:26:30 +0000 (13:26 -0700)]
Merge tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable Fixes:
- Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+
- Fix nfs_path in case of a rename retry
- Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag
New features and improvements:
- Replace dprintk() calls with tracepoints
- Make cache consistency bitmap dynamic
- Added support for the NFS v4.2 READ_PLUS operation
- Improvements to net namespace uniquifier
Other bugfixes and cleanups:
- Remove redundant clnt pointer
- Don't update timeout values on connection resets
- Remove redundant tracepoints
- Various cleanups to comments
- Fix oops when trying to use copy_file_range with v4.0 source server
- Improvements to flexfiles mirrors
- Add missing 'local_lock=posix' mount option"
* tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (55 commits)
NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flag
NFSv4: Fix up RCU annotations for struct nfs_netns_client
NFS: Only reference user namespace from nfs4idmap struct instead of cred
nfs: add missing "posix" local_lock constant table definition
NFSv4: Use the net namespace uniquifier if it is set
NFSv4: Clean up initialisation of uniquified client id strings
NFS: Decode a full READ_PLUS reply
SUNRPC: Add an xdr_align_data() function
NFS: Add READ_PLUS hole segment decoding
SUNRPC: Add the ability to expand holes in data pages
SUNRPC: Split out _shift_data_right_tail()
SUNRPC: Split out xdr_realign_pages() from xdr_align_pages()
NFS: Add READ_PLUS data segment support
NFS: Use xdr_page_pos() in NFSv4 decode_getacl()
SUNRPC: Implement a xdr_page_pos() function
SUNRPC: Split out a function for setting current page
NFS: fix nfs_path in case of a rename retry
fs: nfs: return per memcg count for xattr shrinkers
NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE
nfs: remove incorrect fallthrough label
...
Linus Torvalds [Tue, 20 Oct 2020 20:19:30 +0000 (13:19 -0700)]
Merge tag 'io_uring-5.10-2020-10-20' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"A mix of fixes and a few stragglers. In detail:
- Revert the bogus __read_mostly that we discussed for the initial
pull request.
- Fix a merge window regression with fixed file registration error
path handling.
- Fix io-wq numa node affinities.
- Series abstracting out an io_identity struct, making it both easier
to see what the personality items are, and also easier to to adopt
more. Use this to cover audit logging.
- Fix for read-ahead disabled block condition in async buffered
reads, and using single page read-ahead to unify what
generic_file_buffer_read() path is used.
- Series for REQ_F_COMP_LOCKED fix and removal of it (Pavel)
- Poll fix (Pavel)"
* tag 'io_uring-5.10-2020-10-20' of git://git.kernel.dk/linux-block: (21 commits)
io_uring: use blk_queue_nowait() to check if NOWAIT supported
mm: use limited read-ahead to satisfy read
mm: mark async iocb read as NOWAIT once some data has been copied
io_uring: fix double poll mask init
io-wq: inherit audit loginuid and sessionid
io_uring: use percpu counters to track inflight requests
io_uring: assign new io_identity for task if members have changed
io_uring: store io_identity in io_uring_task
io_uring: COW io_identity on mismatch
io_uring: move io identity items into separate struct
io_uring: rely solely on work flags to determine personality.
io_uring: pass required context in as flags
io-wq: assign NUMA node locality if appropriate
io_uring: fix error path cleanup in io_sqe_files_register()
Revert "io_uring: mark io_uring_fops/io_op_defs as __read_mostly"
io_uring: fix REQ_F_COMP_LOCKED by killing it
io_uring: dig out COMP_LOCK from deep call chain
io_uring: don't put a poll req under spinlock
io_uring: don't unnecessarily clear F_LINK_TIMEOUT
io_uring: don't set COMP_LOCKED if won't put
...
Jon Derrick [Tue, 28 Jul 2020 19:49:43 +0000 (13:49 -0600)]
PCI: vmd: Create IRQ allocation helper
Move the IRQ allocation and SRCU initialization code to a new helper. No
functional changes.
Link: https://lore.kernel.org/r/20200728194945.14126-5-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Jon Derrick [Tue, 28 Jul 2020 19:49:42 +0000 (13:49 -0600)]
PCI: vmd: Create IRQ Domain configuration helper
Move the IRQ and MSI Domain configuration code to new helpers. No
functional changes.
Link: https://lore.kernel.org/r/20200728194945.14126-4-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Jon Derrick [Tue, 28 Jul 2020 19:49:41 +0000 (13:49 -0600)]
PCI: vmd: Create bus offset configuration helper
Move the bus offset configuration discovery code to a new helper. Modify
the bus offset 2-bit decode switch to have a 0 case and a default error
case, just in case the field is expanded in future hardware.
Link: https://lore.kernel.org/r/20200728194945.14126-3-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Jon Derrick [Tue, 28 Jul 2020 19:49:40 +0000 (13:49 -0600)]
PCI: vmd: Create physical offset helper
Move the guest-passthrough physical offset discovery code to a new helper.
No functional changes.
Link: https://lore.kernel.org/r/20200728194945.14126-2-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Stephen Boyd [Tue, 20 Oct 2020 18:47:07 +0000 (11:47 -0700)]
Merge branches 'clk-ingenic', 'clk-at91', 'clk-kconfig', 'clk-imx', 'clk-qcom', 'clk-prima2' and 'clk-bcm' into clk-next
- Support qcom SM8150/SM8250 video and display clks
- Change how qcom's display port clks work
* clk-ingenic:
clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
clk: ingenic: Use readl_poll_timeout instead of custom loop
clk: ingenic: Use to_clk_info() macro for all clocks
* clk-at91:
clk: at91: sam9x60: support only two programmable clocks
clk: at91: clk-sam9x60-pll: remove unused variable
clk: at91: clk-main: update key before writing AT91_CKGR_MOR
clk: at91: remove the checking of parent_name
* clk-kconfig:
clk: Restrict CLK_HSDK to ARC_SOC_HSDK
* clk-imx:
clk: imx8mq: Fix usdhc parents order
clk: imx: imx21: Remove clock driver
clk: imx: gate2: Fix a few typos
clk: imx: Fix and update kerneldoc
clk: imx: fix i.MX7D peripheral clk mux flags
clk: imx: fix composite peripheral flags
clk: imx: Correct the memrepair clock on imx8mp
clk: imx: Correct the root clk of media ldb on imx8mp
clk: imx: vf610: Add CRC clock
clk: imx: Explicitly include bits.h
clk: imx8qxp: Support building i.MX8QXP clock driver as module
clk: imx8m: Support module build
clk: imx: Add clock configuration for ARMv7 platforms
clk: imx: Support building i.MX common clock driver as module
clk: composite: Export clk_hw_register_composite()
clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits
* clk-qcom:
clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
clk: qcom: Add display clock controller driver for SM8150 and SM8250
dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings
clk: qcom: add video clock controller driver for SM8250
clk: qcom: add video clock controller driver for SM8150
dt-bindings: clock: add SM8250 QCOM video clock bindings
dt-bindings: clock: add SM8150 QCOM video clock bindings
dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc
clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs
clk/qcom: fix spelling typo
clk: qcom: gcc-sdm660: Fix wrong parent_map
clk: qcom: dispcc: Update DP clk ops for phy design
clk: qcom: gcc-msm8939: remove defined but not used variables
clk: qcom: ipq8074: make pcie0_rchng_clk_src static
* clk-prima2:
clk: clk-prima2: fix return value check in prima2_clk_init()
* clk-bcm:
clk: bcm2835: add missing release if devm_clk_hw_register fails
clk: bcm: rpi: Add register to control pixel bvb clk
Stephen Boyd [Tue, 20 Oct 2020 18:47:02 +0000 (11:47 -0700)]
Merge branches 'clk-semicolon', 'clk-axi-clkgen', 'clk-qoriq', 'clk-baikal', 'clk-const' and 'clk-mmp2' into clk-next
* clk-semicolon:
clk: meson: use semicolons rather than commas to separate statements
clk: mvebu: ap80x-cpu: use semicolons rather than commas to separate statements
clk: uniphier: use semicolons rather than commas to separate statements
* clk-axi-clkgen:
clk: axi-clkgen: Set power bits for fractional mode
clk: axi-clkgen: Add support for fractional dividers
* clk-qoriq:
clk: qoriq: modify MAX_PLL_DIV to 32
* clk-baikal:
clk: baikal-t1: Mark Ethernet PLL as critical
* clk-const:
clk: pxa: Constify static struct clk_ops
* clk-mmp2:
clk: mmp2: Fix the display clock divider base
Stephen Boyd [Tue, 20 Oct 2020 18:46:47 +0000 (11:46 -0700)]
Merge branches 'clk-simplify', 'clk-ti', 'clk-tegra', 'clk-rockchip' and 'clk-mediatek' into clk-next
- Small non-critical fixes for TI clk driver
- Support Mediatek MT8167 clks
* clk-simplify:
clk: mediatek: fix platform_no_drv_owner.cocci warnings
clk: mediatek: mt7629: simplify the return expression of mtk_infrasys_init
clk: mediatek: mt6797: simplify the return expression of mtk_infrasys_init
* clk-ti:
clk: ti: dra7: add missing clkctrl register for SHA2 instance
clk: ti: clockdomain: fix static checker warning
clk: ti: autoidle: add checks against NULL pointer reference
clk: keystone: sci-clk: add 10% slack to set_rate
clk: keystone: sci-clk: cache results of last query rate operation
clk: keystone: sci-clk: fix parsing assigned-clock data during probe
* clk-tegra:
clk: tegra: Drop !provider check in tegra210_clk_emc_set_rate()
* clk-rockchip:
clk: rockchip: Initialize hw to error to avoid undefined behavior
clk: rockchip: rk3399: Support module build
clk: rockchip: fix the clk config to support module build
clk: rockchip: Export some clock common APIs for module drivers
clk: rockchip: Export rockchip_register_softrst()
clk: rockchip: Export rockchip_clk_register_ddrclk()
clk: rockchip: Use clk_hw_register_composite instead of clk_register_composite calls
clk: rockchip: rk3308: drop unused mux_timer_src_p
* clk-mediatek:
clk: mediatek: Add MT8167 clock support
dt-bindings: clock: mediatek: add bindings for MT8167 clocks
clk: mediatek: add UART0 clock support
Stephen Boyd [Tue, 20 Oct 2020 18:46:34 +0000 (11:46 -0700)]
Merge branches 'clk-renesas', 'clk-amlogic', 'clk-allwinner', 'clk-samsung', 'clk-doc' and 'clk-unused' into clk-next
- Remove various unused variables in clk drivers
* clk-renesas:
clk: renesas: rcar-gen3: Update description for RZ/G2
clk: renesas: cpg-mssr: Add support for R-Car V3U
clk: renesas: cpg-mssr: Add register pointers into struct cpg_mssr_priv
clk: renesas: cpg-mssr: Use enum clk_reg_layout instead of a boolean flag
dt-bindings: clock: renesas,cpg-mssr: Document r8a779a0
dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions
dt-bindings: power: Add r8a779a0 SYSC power domain definitions
clk: renesas: rcar-gen2: Rename vsp1-(sy|rt) clocks to vsp(s|r)
clk: renesas: r8a7742: Add clk entry for VSPR
* clk-amlogic:
clk: meson: make shipped controller configurable
clk: meson: g12a: mark fclk_div2 as critical
clk: meson: axg-audio: fix g12a tdmout sclk inverter
clk: meson: axg-audio: separate axg and g12a regmap tables
clk: meson: add sclk-ws driver
* clk-allwinner:
clk: sunxi-ng: sun8i: r40: Use sigma delta modulation for audio PLL
clk: sunxi-ng: add support for the Allwinner A100 CCU
dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU
* clk-samsung:
clk: s2mps11: initialize driver via module_platform_driver
clk: samsung: Use cached clk_hws instead of __clk_lookup() calls
clk: samsung: exynos5420/5250: Add IDs to the CPU parent clk definitions
clk: samsung: Add clk ID definitions for the CPU parent clocks
clk: samsung: exynos5420: Avoid __clk_lookup() calls when enabling clocks
clk: samsung: exynos5420: Add definition of clock ID for mout_sw_aclk_g3d
clk: samsung: Keep top BPLL mux on Exynos542x enabled
* clk-doc:
clk: davinci: add missing kerneldoc
clk: fixed: add missing kerneldoc
* clk-unused:
clk: socfpga: agilex: Remove unused variable 'cntr_mux'
clk: si5341: drop unused 'err' variable
clk: mmp: pxa1928: drop unused 'clk' variable
clk: at91: drop unused at91sam9g45_pcr_layout
Linus Torvalds [Tue, 20 Oct 2020 17:56:34 +0000 (10:56 -0700)]
Merge tag 'for-v5.10' of git://git./linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- add wireless type
- properly document current direction
Battery/charger driver changes:
- new fuel-gauge/charger driver for RN5T618/RN5T619
- new charger driver for BQ25980, BQ25975 and BQ25960
- bq27xxx-battery: add support for TI bq34z100
- gpio-charger: convert to GPIO descriptors
- gpio-charger: add optional support for charge current limiting
- max17040: add support for max17041, max17043, max17044
- max17040: add support for max17048, max17049, max17058, max17059
- smb347-charger: add DT support
- smb247-charger: add SMB345 and SMB358 support
- simple-battery: add temperature properties
- lots of minor fixes, cleanups and DT binding YAML conversions
Reset drivers:
- ocelot: Add support for Sparx5"
* tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (81 commits)
power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5
power: supply: bq25980: Fix uninitialized wd_reg_val and overrun
power: supply: ltc2941: Fix ptr to enum cast
power: supply: test-power: revise parameter printing to use sprintf
power: supply: charger-manager: fix incorrect check on charging_duration_ms
power: supply: max17040: Fix ptr to enum cast
power: supply: bq25980: Fix uninitialized wd_reg_val
power: supply: bq25980: remove redundant zero check on ret
power: reset: ocelot: Add support for Sparx5
dt-bindings: reset: ocelot: Add Sparx5 support
power: supply: sbs-battery: keep error code when get_property() fails
power: supply: bq25980: Add support for the BQ259xx family
dt-binding: bq25980: Add the bq25980 flash charger
power: supply: fix spelling mistake "unprecise" -> "imprecise"
power: supply: test_power: add missing newlines when printing parameters by sysfs
power: supply: pm2301: drop duplicated i2c_device_id
power: supply: charger-manager: drop unused charger assignment
power: supply: rt9455: skip 'struct acpi_device_id' when !CONFIG_ACPI
power: supply: goldfish: skip 'struct acpi_device_id' when !CONFIG_ACPI
power: supply: bq25890: skip 'struct acpi_device_id' when !CONFIG_ACPI
...
Martijn de Gouw [Mon, 19 Oct 2020 11:42:27 +0000 (13:42 +0200)]
SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
When the passed token is longer than 4032 bytes, the remaining part
of the token must be copied from the rqstp->rq_arg.pages. But the
copy must make sure it happens in a consecutive way.
With the existing code, the first memcpy copies 'length' bytes from
argv->iobase, but since the header is in front, this never fills the
whole first page of in_token->pages.
The mecpy in the loop copies the following bytes, but starts writing at
the next page of in_token->pages. This leaves the last bytes of page 0
unwritten.
Symptoms were that users with many groups were not able to access NFS
exports, when using Active Directory as the KDC.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Fixes:
5866efa8cbfb "SUNRPC: Fix svcauth_gss_proxy_init()"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Roberto Bergantinos Corpas [Mon, 19 Oct 2020 09:33:56 +0000 (11:33 +0200)]
sunrpc: raise kernel RPC channel buffer size
Its possible that using AUTH_SYS and mountd manage-gids option a
user may hit the 8k RPC channel buffer limit. This have been observed
on field, causing unanswered RPCs on clients after mountd fails to
write on channel :
rpc.mountd[11231]: auth_unix_gid: error writing reply
Userland nfs-utils uses a buffer size of 32k (RPC_CHAN_BUF_SIZE), so
lets match those two.
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Linus Torvalds [Tue, 20 Oct 2020 17:19:02 +0000 (10:19 -0700)]
Merge tag 'drm-next-2020-10-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Some fixes queued up already for i915 and amdgpu, I've also included
the fix for the clang warning you've seen.
i915:
- set all unused color plane offsets to ~0xfff again (Ville)
- fix TGL DKL PHY DP vswing handling (Ville)
amdgpu:
- DCN clang warning fix
- eDP fix
- BACO fix
- kernel documentation fixes
- SMU7 mclk fix
- VCN1 hw bug workaround
amdkfd:
- kvfree vs kfree fix"
* tag 'drm-next-2020-10-19' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Fix incorrect dsc force enable logic
drm/amdkfd: Use kvfree in destroy_crat_image
drm/amdgpu: vcn and jpeg ring synchronization
drm/amd/pm: increase mclk switch threshold to 200 us
docs: amdgpu: fix a warning when building the documentation
drm/amd/display: kernel-doc: document force_timing_sync
drm/amdgpu/swsmu: init the baco mutex in early_init
drm/amd/display: Fix module load hangs when connected to an eDP
drm/i915: Set all unused color plane offsets to ~0xfff again
drm/i915: Fix TGL DKL PHY DP vswing handling
Linus Torvalds [Tue, 20 Oct 2020 16:35:06 +0000 (09:35 -0700)]
Merge tag 'iommu-fix-v5.10' of git://git./linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
"Fix a build regression with !CONFIG_IOMMU_API"
* tag 'iommu-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not built
Abel Vesa [Thu, 15 Oct 2020 09:25:44 +0000 (12:25 +0300)]
clk: imx8mq: Fix usdhc parents order
According to the latest RM (see Table 5-1. Clock Root Table),
both usdhc root clocks have the parent order as follows:
000 - 25M_REF_CLK
001 - SYSTEM_PLL1_DIV2
010 - SYSTEM_PLL1_CLK
011 - SYSTEM_PLL2_DIV2
100 - SYSTEM_PLL3_CLK
101 - SYSTEM_PLL1_DIV3
110 - AUDIO_PLL2_CLK
111 - SYSTEM_PLL1_DIV8
So the audio_pll2_out and sys3_pll_out have to be swapped.
Fixes:
b80522040cd3 ("clk: imx: Add clock driver for i.MX8MQ CCM")
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reported-by: Cosmin Stefan Stoica <cosmin.stoica@nxp.com>
Link: https://lore.kernel.org/r/1602753944-30757-1-git-send-email-abel.vesa@nxp.com
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stephen Boyd [Sat, 17 Oct 2020 02:01:37 +0000 (19:01 -0700)]
clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
If the GDSC is enabled out of boot but doesn't have the retain ff bit
set we will get confusing results where the registers that are powered
by the GDSC lose their contents on the first power off of the GDSC but
thereafter they retain their contents. This is because gdsc_init() fails
to make sure the RETAIN_FF bit is set when it probes the GDSC the first
time and thus powering off the GDSC causes the register contents to be
reset. We do set the RETAIN_FF bit the next time we power on the GDSC,
see gdsc_enable(), so that subsequent GDSC power off's don't lose
register contents state.
Forcibly set the bit at device probe time so that the kernel's assumed
view of the GDSC is consistent with the state of the hardware. This
fixes a problem where the audio PLL doesn't work on sc7180 when the
bootloader leaves the lpass_core_hm GDSC enabled at boot (e.g. to make a
noise) but critically doesn't set the RETAIN_FF bit.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Taniya Das <tdas@codeaurora.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Fixes:
173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201017020137.1251319-1-sboyd@kernel.org
Reviewed-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org>
Linus Torvalds [Tue, 20 Oct 2020 16:24:01 +0000 (09:24 -0700)]
Merge tag 'for-linus-5.10b-rc1b-tag' of git://git./linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- A single patch to fix the Xen security issue XSA-331 (malicious
guests can DoS dom0 by triggering NULL-pointer dereferences or access
to stale data).
- A larger series to fix the Xen security issue XSA-332 (malicious
guests can DoS dom0 by sending events at high frequency leading to
dom0's vcpus being busy in IRQ handling for elongated times).
* tag 'for-linus-5.10b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: block rogue events for some time
xen/events: defer eoi in case of excessive number of events
xen/events: use a common cpu hotplug hook for event channels
xen/events: switch user event channels to lateeoi model
xen/pciback: use lateeoi irq binding
xen/pvcallsback: use lateeoi irq binding
xen/scsiback: use lateeoi irq binding
xen/netback: use lateeoi irq binding
xen/blkback: use lateeoi irq binding
xen/events: add a new "late EOI" evtchn framework
xen/events: fix race in evtchn_fifo_unmask()
xen/events: add a proper barrier to 2-level uevent unmasking
xen/events: avoid removing an event channel while handling it
Linus Torvalds [Tue, 20 Oct 2020 16:18:31 +0000 (09:18 -0700)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- handle inexact watchpoint addresses (Douglas Anderson)
- decompressor serial debug cleanups (Linus Walleij)
- update L2 cache prefetch bits (Guillaume Tucker)
- add text offset and malloc size to the decompressor kexec data
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: add malloc size to decompressor kexec size structure
ARM: add TEXT_OFFSET to decompressor kexec image structure
ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values
ARM: 9010/1: uncompress: Print the location of appended DTB
ARM: 9009/1: uncompress: Enable debug in head.S
ARM: 9008/1: uncompress: Drop excess whitespace print
ARM: 9006/1: uncompress: Wait for ready and busy in debug prints
ARM: 9005/1: debug: Select flow control for all debug UARTs
ARM: 9004/1: debug: Split waituart to CTS and TXRDY
ARM: 9003/1: uncompress: Delete unused debug macros
ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses
Xiaoyang Xu [Fri, 16 Oct 2020 09:35:58 +0000 (17:35 +0800)]
vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
pfn is not added to pfn_list when vfio_add_to_pfn_list fails.
vfio_unpin_page_external will exit directly without calling
vfio_iova_put_vfio_pfn. This will lead to a memory leak.
Fixes:
a54eb55045ae ("vfio iommu type1: Add support for mediated devices")
Signed-off-by: Xiaoyang Xu <xuxiaoyang2@huawei.com>
[aw: simplified logic, add Fixes]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Linus Torvalds [Tue, 20 Oct 2020 16:09:44 +0000 (09:09 -0700)]
Merge tag 'arc-5.10-rc1' of git://git./linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
"The bulk of ARC pull request is removal of EZChip NPS platform which
was suffering from constant bitrot. In recent years EZChip has gone
though multiple successive acquisitions and I guess things and people
move on. I would like to take this opportunity to recognize and thank
all those good folks (Gilad, Noam, Ofer...) for contributing major
bits to ARC port (SMP, Big Endian).
Summary:
- drop support for EZChip NPS platform
- misc other fixes"
* tag 'arc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arc: include/asm: fix typos of "themselves"
ARC: SMP: fix typo and use "come up" instead of "comeup"
ARC: [dts] fix the errors detected by dtbs_check
arc: plat-hsdk: fix kconfig dependency warning when !RESET_CONTROLLER
ARC: [plat-eznps]: Drop support for EZChip NPS platform
Tom Rix [Mon, 19 Oct 2020 19:02:49 +0000 (12:02 -0700)]
PCI: v3-semi: Remove unneeded break
A break is not needed if it is preceded by a return
Link: https://lore.kernel.org/r/20201019190249.7825-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Chris Down [Tue, 20 Oct 2020 09:34:59 +0000 (10:34 +0100)]
kbuild: Use uname for LINUX_COMPILE_HOST detection
`hostname` may not be present on some systems as it's not mandated by
POSIX/SUSv4. This isn't just a theoretical problem: on Arch Linux,
`hostname` is provided by `inetutils`, which isn't part of the base
distribution.
./scripts/mkcompile_h: line 38: hostname: command not found
Use `uname -n` instead, which is more likely to be available (and
mandated by standards).
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Mark Wielaard [Sat, 17 Oct 2020 12:01:35 +0000 (14:01 +0200)]
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
Some old GCC versions between 4.5.0 and 4.9.1 might miscompile code
with -fvar-tracking-assingments (which is enabled by default with -g -O2).
Commit
2062afb4f804 ("Fix gcc-4.9.0 miscompilation of load_balance()
in scheduler") added -fno-var-tracking-assignments unconditionally to
work around this. But newer versions of GCC no longer have this bug, so
only add it for versions of GCC before 5.0. This allows various tools
such as a perf probe or gdb debuggers or systemtap to resolve variable
locations using dwarf locations in more code.
Signed-off-by: Mark Wielaard <mark@klomp.org>
Acked-by: Ian Rogers <irogers@google.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Rasmus Villemoes [Fri, 16 Oct 2020 12:58:46 +0000 (14:58 +0200)]
kbuild: remove leftover comment for filechk utility
After commit
43fee2b23895 ("kbuild: do not redirect the first
prerequisite for filechk"), the rule is no longer automatically passed
$< as stdin, so remove the stale comment.
Fixes:
43fee2b23895 ("kbuild: do not redirect the first prerequisite for filechk")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Sami Tolvanen [Tue, 13 Oct 2020 00:31:45 +0000 (17:31 -0700)]
treewide: remove DISABLE_LTO
This change removes all instances of DISABLE_LTO from
Makefiles, as they are currently unused, and the preferred
method of disabling LTO is to filter out the flags instead.
Note added by Masahiro Yamada:
DISABLE_LTO was added as preparation for GCC LTO, but GCC LTO was
not pulled into the mainline. (https://lkml.org/lkml/2014/4/8/272)
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Will Deacon [Tue, 20 Oct 2020 15:01:57 +0000 (16:01 +0100)]
arm64: spectre-v2: Favour CPU-specific mitigation at EL2
Spectre-v2 can be mitigated on Falkor CPUs either by calling into
firmware or by issuing a magic, CPU-specific sequence of branches.
Although the latter is faster, the size of the code sequence means that
it cannot be used in the EL2 vectors, and so there is a need for both
mitigations to co-exist in order to achieve optimal performance.
Change the mitigation selection logic for Spectre-v2 so that the
CPU-specific mitigation is used only when the firmware mitigation is
also available, rather than when a firmware mitigation is unavailable.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Nick Desaulniers [Fri, 16 Oct 2020 17:53:39 +0000 (10:53 -0700)]
arm64: link with -z norelro regardless of CONFIG_RELOCATABLE
With CONFIG_EXPERT=y, CONFIG_KASAN=y, CONFIG_RANDOMIZE_BASE=n,
CONFIG_RELOCATABLE=n, we observe the following failure when trying to
link the kernel image with LD=ld.lld:
error: section: .exit.data is not contiguous with other relro sections
ld.lld defaults to -z relro while ld.bfd defaults to -z norelro. This
was previously fixed, but only for CONFIG_RELOCATABLE=y.
Fixes:
3bbd3db86470 ("arm64: relocatable: fix inconsistencies in linker script and options")
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201016175339.2429280-1-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Palmer Dabbelt [Sat, 17 Oct 2020 00:26:37 +0000 (17:26 -0700)]
arm64: Fix a broken copyright header in gen_vdso_offsets.sh
I was going to copy this but I didn't want to chase around the build
system stuff so I did it a different way.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20201017002637.503579-1-palmer@dabbelt.com
Signed-off-by: Will Deacon <will@kernel.org>
Hou Zhiqiang [Wed, 16 Sep 2020 05:41:30 +0000 (13:41 +0800)]
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
NXP Layerscape (ls1028a, ls2088a), dra7xxx and imx6 platforms are either
programmed or statically configured to forward the error triggered by a
link-down state (eg no connected endpoint device) on the system bus for
PCI configuration transactions; these errors are reported as an SError
at system level, which is fatal.
Enumerating a PCI tree when the PCIe link is down is not sensible
either, so even if the link-up check is racy (link can go down after
map_bus() is called) add a link-up check in map_bus() to prevent issuing
configuration transactions when the link is down.
SError report:
SError Interrupt on CPU2, code 0xbf000002 -- SError
CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
Hardware name: LS1046A RDB Board (DT)
pstate:
20000085 (nzCv daIf -PAN -UAO BTYPE=--)
pc : pci_generic_config_read+0x3c/0xe0
lr : pci_generic_config_read+0x24/0xe0
sp :
ffff80001003b7b0
x29:
ffff80001003b7b0 x28:
ffff80001003ba74
x27:
ffff000971d96800 x26:
ffff00096e77e0a8
x25:
ffff80001003b874 x24:
ffff80001003b924
x23:
0000000000000004 x22:
0000000000000000
x21:
0000000000000000 x20:
ffff80001003b874
x19:
0000000000000004 x18:
ffffffffffffffff
x17:
00000000000000c0 x16:
fffffe0025981840
x15:
ffffb94c75b69948 x14:
62203a383634203a
x13:
666e6f635f726568 x12:
202c31203d207265
x11:
626d756e3e2d7375 x10:
656877202c307830
x9 :
203d206e66766564 x8 :
0000000000000908
x7 :
0000000000000908 x6 :
ffff800010900000
x5 :
ffff00096e77e080 x4 :
0000000000000000
x3 :
0000000000000003 x2 :
84fa3440ff7e7000
x1 :
0000000000000000 x0 :
ffff800010034000
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
Hardware name: LS1046A RDB Board (DT)
Call trace:
dump_backtrace+0x0/0x1c0
show_stack+0x18/0x28
dump_stack+0xd8/0x134
panic+0x180/0x398
add_taint+0x0/0xb0
arm64_serror_panic+0x78/0x88
do_serror+0x68/0x180
el1_error+0x84/0x100
pci_generic_config_read+0x3c/0xe0
dw_pcie_rd_other_conf+0x78/0x110
pci_bus_read_config_dword+0x88/0xe8
pci_bus_generic_read_dev_vendor_id+0x30/0x1b0
pci_bus_read_dev_vendor_id+0x4c/0x78
pci_scan_single_device+0x80/0x100
Link: https://lore.kernel.org/r/20200916054130.8685-1-Zhiqiang.Hou@nxp.com
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log, remove Fixes tag]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>