mac80211: correct legacy rates check in ieee80211_calc_rx_airtime

There are no legacy rates on 60GHz or sub-1GHz band, so modify the check.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Link: https://lore.kernel.org/r/20220308021645.16272-1-MeiChia.Chiu@mediatek.com
[Ghz ->  GHz]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation

It should be NL80211_IFTYPE_OCB instead.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/1645542399-4680-1-git-send-email-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible

Previous memory allocations in this function already use GFP_KERNEL, so
use __dev_alloc_skb() and an explicit GFP_KERNEL instead of an implicit
GFP_ATOMIC.

This gives more opportunities of successful allocation.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/194a0e2ff00c3fae88cc9fba47431747360c8242.1645345378.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE

Fix the following coccicheck warning:
./drivers/net/wireless/mac80211_hwsim.c:1040:0-23: WARNING:
hwsim_fops_rx_rssi should be defined with
DEFINE_DEBUGFS_ATTRIBUTE

Signed-off-by: Yihao Han <hanyihao@vivo.com>
Link: https://lore.kernel.org/r/20220218070228.6210-1-hanyihao@vivo.com
[fix indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge ath-next from git://git./linux/kernel/git/kvalo/ath.git

ath.git patches for v5.18. Major changes:

ath6kl

* add device ID for WLU5150-D81

Merge tag 'iwlwifi-next-for-kalle-2022-03-10' of git://git./linux/kernel/git/iwlwifi/iwlwifi-next

iwlwifi patches for v5.18

* Mostly debugging infra changes;
* Some more work on the Bz family of devices;
* Bump the FW API twice;
* Some other small fixes, clean-ups and improvements.

rtw89: 8852c: process logic efuse map

Add a struct to access logic efuse map, and fill data according to the map.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-14-pkshih@realtek.com

rtw89: 8852c: process efuse of phycap

Read phycap data programmed in efuse, and store them into array.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-13-pkshih@realtek.com

rtw89: support DAV efuse reading operation

DAV is an another efuse region that new chip, like 8852C, has this region.
Extend the code to read it, and convert the physical map to logical map
followed by original logical map.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-12-pkshih@realtek.com

rtw89: 8852c: add chip::dle_mem

These tables are used to configure hardware buffer size according to
operating mode.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-11-pkshih@realtek.com

rtw89: add page_regs to handle v1 chips

These registers are used to configure and access page size of HCI.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-10-pkshih@realtek.com

rtw89: add chip_info::{h2c,c2h}_reg to support more chips

This is a register-based H2C/C2H interface to exchange data with firmware.
Since the register addresses of 8852A and 8852C are different, add fields
to chip_info to support this.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-9-pkshih@realtek.com

rtw89: add hci_func_en_addr to support variant generation

The HCI_FUNC_EN address of 8852C is different from existing chipset, so
add a chip_info::hci_func_en_addr to fill the address individually.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-8-pkshih@realtek.com

rtw89: add power_{on/off}_func

New chipset uses individual power_{on/off} functions to replace old power
sequences, because it is hard to represent new complicated flow in a
sequence table.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-7-pkshih@realtek.com

rtw89: read chip version depends on chip ID

Only 8852A may get wrong chip version if power isn't on, so it needs
additional actions to correct the version. Later chips don't need those.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-6-pkshih@realtek.com

rtw89: pci: use a struct to describe all registers address related to DMA channel

We have had a struct rtw89_pci_ch_dma_addr to describe register address,
so use it as regular. Since the addresses should be changed dynamically
according to operating mode, I don't change it to be constant.

These changes don't affect the logic, so I put them in this separated
patch.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-5-pkshih@realtek.com

rtw89: pci: add V1 of PCI channel address

8852CE use V1 address, and flow is totally shared with 8852AE.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-4-pkshih@realtek.com

rtw89: pci: add struct rtw89_pci_info

Use this struct to implement chip::ops related to PCI interface.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-3-pkshih@realtek.com

rtw89: 8852c: add 8852c empty files

Add these files, and then I can add specific chip::ops or chip::info along
with the existing chip.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-2-pkshih@realtek.com

MAINTAINERS: add devicetree bindings entry for mt76

Specify devicetree bindings entry for mt76 driver.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/8cbfeceef642ede408b4922c363953cb243cd87f.1646766851.git.lorenzo@kernel.org

brcmfmac: make the read-only array pktflags static const

Don't populate the read-only array pktflags on the stack but
instead make it static const. Also makes the object code a little
smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307223227.165963-1-colin.i.king@gmail.com

rtlwifi: rtl8192ce: remove duplicated function '_rtl92ce_phy_set_rf_sleep'

This function exists in phy_common.c as '_rtl92c_phy_set_rf_sleep'.
Switch to the one in common file.

Signed-off-by: Lu Jicong <jiconglu58@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220306090846.28523-1-jiconglu58@gmail.com

bcma: gpio: remove redundant re-assignment of chip->owner

There are two identical assignments of chip->owner to the same value,
the second assignment is redundant and can be removed.

Cleans up cppcheck warning:
drivers/bcma/driver_gpio.c:184:15: style: Variable 'chip->owner' is
reassigned a value before the old one has been used. [redundantAssignment]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220303085841.1124766-1-colin.i.king@gmail.com

cw1200: use time_is_after_jiffies() instead of open coding it

Use the helper function time_is_{before,after}_jiffies() to improve
code readability.

Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1646018060-61275-1-git-send-email-wangqing@vivo.com

MAINTAINERS: brcm80211: remove Infineon maintainers

These email addresses no longer work, so remove them from MAINTAINERS.

Signed-off-by: Double Lo <Double.Lo@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220222015947.169224-1-double.lo@infineon.com

carl9170: devres ar->survey_info

driver keeps the same survey_info struct for its lifetime around.
This is used because while firmware does help by providing accounting
information of the current channel, it doesn't keep track on the
remaining channels.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/9b9a059b384f49587f4384ba47f01d3fb2115b22.1646250537.git.chunkeey@gmail.com

carl9170: replace bitmap_zalloc with devm_bitmap_zalloc

the mem_bitmap is kept around for the lifetime of the
driver device. This is a perfect candidate for devm.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/0a79221aa5477501c3def032e95ef8018973a514.1646250537.git.chunkeey@gmail.com

carl9170: devres-ing input_allocate_device

devres will take care of freeing the input_device once
it is no longer needed.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/f81a6ff3b02116c6a448c42eecb546ea5d46c108.1646250537.git.chunkeey@gmail.com

carl9170: devres-ing hwrng_register usage

devres will take care of freeing the hwrng once it is no longer needed.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/d1c16490462a9371ab3cc16a018ef5e08382a35e.1646250537.git.chunkeey@gmail.com

carl9170: replace GFP_ATOMIC in ampdu_action, it can sleep

Since ~2010, the driver is allowed to sleep in the ampdu_action
callback thanks to:
commit 85ad181ea788 ("mac80211: allow drivers to sleep in ampdu_action")

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/0036538d0933626a1a5eb2c2c3935cf173028926.1646250537.git.chunkeey@gmail.com

ath10k: Fix error handling in ath10k_setup_msa_resources

The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.

This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.

Fixes: 727fec790ead ("ath10k: Setup the msa resources before qmi init")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220308070238.19295-1-linmq006@gmail.com

ath11k: remove unneeded flush_workqueue

All work currently pending will be done first by calling destroy_workqueue,
so there is no need to flush it explicitly.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi (CGEL ZTE) <lv.ruyi@zte.com.cn>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220301013246.2052570-1-lv.ruyi@zte.com.cn

ath6kl: add device ID for WLU5150-D81

This device with a male Mini-B USB connector is part of Panasonic TVs.

Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220302211436.8746-1-git@apitzsch.eu

iwlwifi: bump FW API to 72 for AX devices

Start supporting API version 72 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.8de72a8ea67f.I66681363afeb34c619379a5989090264fe6b5f2a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: acpi: move ppag code from mvm to fw/acpi

Move the ppag code to fw/acpi to keep consistency
with the other ACPI handling we do.

Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.7f250088b443.I61e64c2758ad178da729ce00428287cc94430eed@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: dbg: check trigger data before access

Without trigger data set, no point in any collection.
so check that we have the info for collecting the data.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.5fb34fb1f0eb.I4d7f2a4d162e80474540c5caf1194ed7d32977bc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: dbg: in sync mode don't call schedule

Today in the code we have two options for collecting data sync/schedule,
the two options call the same function and can lead to racing in free
resources after done.

So we call only one of two sync/schedule, and in case of sync only
call sync function without also schedule to immediately run as a side
job.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.88574097ce1b.I1b42297619d638d677a2300ed9a95105c1262101@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: use 4k queue size for Bz A-step

There's a hardware bug in Bz A-step that can be worked
around by using 4k queue size, so do that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.10ea0e115d05.Idfb3706133bf3b15f1f68f1145e77e89947449d1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: fix SW error MSI-X mapping

We need to also update the IVAR location, since we've shifted
the bit.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 571836a02c7b ("iwlwifi: pcie: update sw error interrupt for BZ family")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.bcfb28484e50.I921df6b5134785d7eeb0c934e4a43157c582fa79@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: yoyo: dump IMR DRAM only for HW and FW error

Support debug collection of the platform IMR memory region
only for HW and FW error. This region needs to be collected
as the last region.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.5b70e5ba9a41.I502f9b6179b97b163992729edd2b3c5c4ca9e311@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: add support for IMR based on platform

Driver needs to enable IMR which is needed for debug on
certain platforms, so add a device config flag to set it.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.0b96b2760503.I08bc741c8c497a2edbe4784cdab6abd8d04c62f3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: yoyo: disable IMR DRAM region if IMR is disabled

Disable IMR region if it is enabled in the TLVs,
but disabled at runtime by the FW.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.2a696656a161.I99705472a8838121ffaca72977015dc2069549b9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: remove cipher scheme support

There are no shipping firmware versions with this, and there
will also not be in the future, so remove the support.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.8b3c8b4adf41.Ib3ddb6b250ea2dd72b4ecc88bdd5cffb86af1dcc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: Configure FW debug preset via module param.

The module param "enable_ini" is currently used to be enable/disable ini.
Add the option to configure the FW debug preset via this module param,
by change it type from boolean to an integer.

Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.4929e4b14956.I1bdffa4c37d4ee349aa0001978b716b96e38b090@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: add a flag to reduce power command.

Add a flags bitfield in REDUCED_TX_POWER_CMD, and
send it as is to FW.

Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.55c2f014f5ee.Iceb632f620de959800f979e212f0dc20240f9d38@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 71 for AX devices

Start supporting API version 71 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.d0898482506f.I2de2f9140c23f39a837f68199bbaf15a20f26abb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

ath9k: make array voice_priority static const

Don't populate the read-only array voice_priority on the stack but
instead make it static const. Also makes the object code a little
smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220222121749.87513-1-colin.i.king@gmail.com

ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_aplist_event

Replace one-element array with flexible-array member in struct
wmi_aplist_event.

Also, make use of the struct_size() helper and remove unneeded variable
ap_info_entry_size.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1b7889828f23763c034c1558cbab9c8e2066053e.1645736204.git.gustavoars@kernel.org

ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_disconnect_event

Replace one-element array with flexible-array member in struct
wmi_disconnect_event.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/e9957dc53ae48c2f39ae57b0157a67d844b5bc20.1645736204.git.gustavoars@kernel.org

ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_connect_event

Replace one-element array with flexible-array member in struct
wmi_connect_event.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/290a0cb7bddd813a6a96a59853880e66917aa03d.1645736204.git.gustavoars@kernel.org

ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_channel_list_reply

Replace one-element array with flexible-array member in struct
wmi_channel_list_reply.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/f3f9728a1dfc3767340f25a963be374e2ef5d8ad.1645736204.git.gustavoars@kernel.org

ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_start_scan_cmd

Replace one-element array with flexible-array member in struct
wmi_start_scan_cmd. Also, make use of the struct_size() helper.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/8b33c6d86a6bd40b5688cf118b4b35850db8d8c7.1645736204.git.gustavoars@kernel.org

ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_begin_scan_cmd

Replace one-element array with flexible-array member in struct
wmi_begin_scan_cmd. Also, make use of the struct_size() helper.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1ef801ea24475501fa0f296cb5435a440135206e.1645736204.git.gustavoars@kernel.org

rtw89: declare HE capabilities in 6G band

To work properly in 6G band, declare HE 6G capabilities. Without this fix,
it can only TX/RX with OFDM rates.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307012741.6371-1-pkshih@realtek.com

rtw89: fix HE PHY bandwidth capability

Bit 2 and 3 are reserved on 5/6 GHz and bit 1 is reserved on 2.4 GHz,
so the driver should only set the non-reserved bits according
to band.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220301004331.6621-1-pkshih@realtek.com

rtw89: add tx_wake notify for low ps mode

We found management frames get stuck when wifi chip
enters low ps mode. So we add one notify wake function
to trigger wifi chip into normal mode before forwarding
management frames.

Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220225030851.13327-3-pkshih@realtek.com

rtw89: 8852a: add ieee80211_ops::hw_scan

Declare this function allows us to use customized scanning policy, so
each scan takes less time. This is a similar implementation to hw_scan
in rtw88, except that we offload more items to firmware and extend the
maximum IE length. For backward compatibility, we fallback to sw_scan
when firmware does not support this feature.

Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220225030851.13327-2-pkshih@realtek.com

Revert "ath: add support for special 0x0 regulatory domain"

This reverts commit 2dc016599cfa9672a147528ca26d70c3654a5423.

Users are reporting regressions in regulatory domain detection and
channel availability.

The problem this was trying to resolve was fixed in firmware anyway:

    QCA6174 hw3.0: sdio-4.4.1: add firmware.bin_WLAN.RMH.4.4.1-00042
    https://github.com/kvalo/ath10k-firmware/commit/4d382787f0efa77dba40394e0bc604f8eff82552

Link: https://bbs.archlinux.org/viewtopic.php?id=254535
Link: http://lists.infradead.org/pipermail/ath10k/2020-April/014871.html
Link: http://lists.infradead.org/pipermail/ath10k/2020-May/015152.html
Link: https://lore.kernel.org/all/1c160dfb-6ccc-b4d6-76f6-4364e0adb6dd@reox.at/
Fixes: 2dc016599cfa ("ath: add support for special 0x0 regulatory domain")
Cc: <stable@vger.kernel.org>
Cc: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20200527165718.129307-1-briannorris@chromium.org

rtw89: get channel parameters of 160MHz bandwidth

Calculate the offset of center and primary frequencies to get hardware
indices of center channel and primary channel, and then use them to
configure hardware to a specific channel.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220222032103.29392-1-pkshih@realtek.com

Merge ath-next from git://git./linux/kernel/git/kvalo/ath.git

ath.git patches for v5.18. Major changes:

ath11k

* debugfs interface to configure firmware debug log level

* debugfs interface to test Target Wake Time (TWT)

* provide 802.11ax High Efficiency (HE) data via radiotap

ath9k

* use hw_random API instead of directly dumping into random.c

wcn36xx

* fix wcn3660 to work on 5 GHz band

Merge tag 'mt76-for-kvalo-2022-02-24' of https://github.com/nbd168/wireless

mt76 patches for 5.18

- bugfixes
- mt7915 thermal management improvements
- SAR support for more mt76 drivers
- mt7986 wmac support on mt7915

mt76: fix dfs state issue with 160 MHz channels

When operating on a mix of DFS and non-DFS channels, the driver only checks
the CAC status of the control channel. This causes beacons/tx to fail if the
control channel is on a non-DFS channel.
Fix this by calling cfg80211_reg_can_beacon to determine the DFS status of
all affected channels

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: simplify conditional

Fix following coccicheck warning:
./drivers/net/wireless/mediatek/mt76/mt7915/mac.c:768:29-31:
WARNING !A || A && B is equivalent to !A || B

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fix injected MPDU transmission to not use HW A-MSDU

Similar to mt7915 driver, do not aggregate injected frames in
HW A-MSDU block.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915e: Enable thermal management by default

By default, mt7915e does not enable thermal management until the default
thermal zone does not reach a trip point.  If the rest of the system
have better cooling than the wireless hardware, then it is possible that
the wireless chip can overheat while the rest of the system is fine.

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915e: Add a hwmon attribute to get the actual throttle state.

The firmware-controlled actual throttle state was previously available
by reading the cooling_device, but this confused the thermal subsystem.
Add a hwmon attribute to get it instead.

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915e: Fix degraded performance after temporary overheat

mt7915e registers a cooling_device with wrong semantics:

1. cooling_device expect that higher states values should cool more, but
   mt7915e did the opposite...  with the exception of state == 0, which
   should "disable thermal management", but does not seem to have any
   effect since the previous state is kept.

The result is that when the thermal zone heats up a bit and bumps the
cooling_device state from 0 to 1 to cool a bit, the performance is
destroyed, and when going back from 1 to 0, the performance stays bad.

2. Reading the cooling_device state does not always return the last
   written state, but can return the actual hardware throttle state,
   which is different.

This is a problem because the mt7915 firmware actually implement the
equivalent of a thermal zone with trip points.  Setting the cooling
device state actually changes the throttles at each trip point, so the
following could occur if the first issue is fixed:

- thermal subsystem set state to 100% power (state=0)
- mt7915e driver set trip throttles to [100%, 50%, 25%, 12%]
- hardware heats up and decides to switch to 50% power
- thermal subsystem see that power is 50% (state=50), decide to increase
  it to 60% (state=40) because the rest of the system is cool.
- mt7915e driver set trip throttle to [60%, 30%, 15%, 7%]
- hardware thus switches to 30% power
[race to the bottom continues...]

This patch corrects the semantics of the cooling_device to the one that
the thermal subsystem expect it.

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: improve signal strength reporting

Instead of just taking the maximum per-chain signal strength values,
add an approximation for the sum of the combined signal.
This should more accurately reflect the real signal strength, especially
if the per-chain signal strength values are close to each other

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: use min_t() to make code cleaner

Use min_t() in order to make code cleaner.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix the muru tlv issue

The muru enable/disable are only set after the first station connection.
Without this patch, the firmware couldn't enable muru
if the first connected station is non-HE type.

Fixes: 16bff457dd33a ("mt76: mt7915: rework mt7915_mcu_sta_muru_tlv()")
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: check band idx for bcc event

Add missing band idx check for DBDC cases.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: Fix assigning negative values to unsigned variable

Smatch reports the following:
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865
mt7615_mac_adjust_sensitivity() warn: assigning (-110) to unsigned
variable 'def_th'
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865
mt7615_mac_adjust_sensitivity() warn: assigning (-98) to unsigned
variable 'def_th'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: adjust wlan_idx size from u8 to u16

Newer chips such as MT7915 require up to 16-bits for this field.

Fixes: 49126ac1f8d26 ("mt76: connac: move mt76_connac_mcu_bss_basic_tlv in connac module")
Signed-off-by: Chad Monroe <chad.monroe@smartrg.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix endianness warnings in mt7915_mac_tx_free()

Fix the following sparse warning in mt7915_mac_tx_free routine:
warning: incorrect type in assignment (different base types)
   expected unsigned int [usertype] *cur_info
   got restricted __le32 *
   warning: cast to restricted __le32

Fixes: c17780e7b21ec ("mt76: mt7915: add txfree event v3")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix endianness warnings in mt7915_debugfs_rx_fw_monitor

Fix the following sparse warnings:
warning: incorrect type in initializer (different base types)
   expected restricted __le16 [usertype] msg_type
   got int
warning: incorrect type in assignment (different base types)
   expected restricted __le32 [usertype] timestamp
   got unsigned int

Fixes: 988845c9361a0 ("mt76: mt7915: add support for passing chip/firmware debug data to user space")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix compiler warning on frame size

The following error is see from the compiler:

  mt7615/debugfs.c: In function ‘mt7615_ext_mac_addr_read’:
  mt7615/debugfs.c:465:1: warning: the frame size of 1072 bytes is
    larger than 1024 bytes [-Wframe-larger-than=]

The issue is due to allocating a buffer as string storage.

Fix by converting to a dynamical allocation of the buffer.

Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: initialize smps mode in mt7915_mcu_sta_rate_ctrl_tlv()

Initialize smps mode to prevent firmware rate adaptation issue.

Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: introduce band_idx in mt7915_phy

The wfsys of MT7986 has only single adie chip for non-dbdc devices,
and it binds to band1 by default. Hence this patch adds band_idx to
explicitly configure phy accordingly.

Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add support for MT7986

This adds MT7986 SoC integrated multi-band 4x4 WiFi 6/6E.

Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

ath10k: fix pointer arithmetic error in trace call

Reading through the commit history, it looks like
there is no special need why we must skip the first 4 bytes
in this trace call:

trace_ath10k_htt_rx_desc(ar, (void*)rx_desc + sizeof(u32),
 hw->rx_desc_ops->rx_desc_size - sizeof(u32));

found in the function ath10k_htt_rx_amsdu_pop in the file htt_rx.c

i think the original author
(who is also the one who added rx_desc tracing capabilities
in a0883cf7e75a) just wanted to trace the rx_desc contents,
ignoring the fw_rx_desc_base info field
(which is the part being skipped over).
But the trace_ath10k_htt_rx_desc later added
don't care about skipping it, so it may be good
to uniform this call to the others in the file.
But this would change the output of the trace and
thus it may be a problem for tools that rely on it.
Therefore I propose until further discussion
to just keep it as it is and just fix the pointer arithmetic bug.

Add missing void* cast to rx descriptor pointer in order to
properly skip the initial 4 bytes of the rx descriptor
when passing it to trace_ath10k_htt_rx_desc trace function.

This fixes the pointer arithmetic error detected
by Dan Carpenter's static analysis tool.

Fixes: 6bae9de622d3 ("ath10k: abstract htt_rx_desc structure")

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1

Signed-off-by: Francesco Magliocca <franciman12@gmail.com>
Link: https://lore.kernel.org/ath10k/20220201130900.GD22458@kili/
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220221122638.7971-1-franciman12@gmail.com

carl9170: Replace zero-length arrays with flexible-array members

There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/78
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220216194955.GA904126@embeddedor

ath11k: add dbring debug support

Target copies spectral report and CFR report through dbring to
host for further processing. This mechanism involves ring and
buffer management in the Host, FW, and uCode, where improper
tail pointer update issues are seen.

This dbring debug support help to debug such issues by tracking
head and tail pointer movement along with the timestamp at which
each buffer is received and replenished.

Provide a debugfs interface to enalbe/disable dbring debug
support and dump the dbring debug entries.

Also introduced a new hardware param to add dbring debugfs support
for few hardwares which are using dbings.

Usage:

echo <dbr_id> <val> > /sys/kernel/debug/ath11k/ipq8074_2/
mac0/enable_dbr_debug

dbr_id: 0 for spectral and 1 for CFR
val: 0 - disable, 1 - enable.

Tested-on: IPQ8074 WLAN.HK.2.4.0.1-01467-QCAHKSWPL_SILICONZ-1

Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1645366059-11798-1-git-send-email-quic_vnaralas@quicinc.com

ath11k: translate HE status to radiotap format

Translate HE status to radiotap format. This uses HE radiotap
definitions from include/net/ieee80211_radiotap.h.

Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220217012112.31211-4-pradeepc@codeaurora.org

ath11k: decode HE status tlv

Add new bitmasks and macro definitions required for parsing HE
status tlvs. Decode HE status tlvs, which will used in dumping
ppdu stats as well as updating radiotap headers.

Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220217012112.31211-3-pradeepc@codeaurora.org

ath11k: switch to using ieee80211_tx_status_ext()

This allows us to pass HE rates down into the stack.

Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220217012112.31211-2-pradeepc@codeaurora.org

dt-bindings: net: wireless: mt76: document bindings for MT7986

Add an entry for MT7986 SoC.

Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921s: fix missing fc type/sub-type for 802.11 pkts

For non-mmio devices, should set fc values to proper txwi config

Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support")
Tested-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Leon Yen <Leon.Yen@mediatek.com>
Signed-off-by: Leon Yen <Leon.Yen@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix potential memory leak of fw monitor packets

Free the skb of fw monitor packets.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: Fix channel state update error issue

Fix channel state update error issue due to wrong
register access for mt7916.

Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: fix endianness errors in reverse_frag0_hdr_trans

Fix ht ctl field size in mt{7615,7915,7921}_reverse_frag0_hdr_trans.
Fix the following endianness warnings in mt{7615,7915,7921}_reverse_frag0_hdr_trans:

drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27: warning: incorrect type in assignment (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27:    expected restricted __le16 [usertype] frame_control
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27:    got unsigned long
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22: warning: incorrect type in assignment (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22:    expected restricted __le16 [usertype] seq_ctrl
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22:    got unsigned long
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18: warning: incorrect type in assignment (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18:    expected restricted __le32 [usertype] qos_ctrl
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18:    got unsigned long
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17: warning: incorrect type in assignment (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17:    expected restricted __le32 [usertype] ht_ctrl
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17:    got unsigned long
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:448:25: warning: restricted __be16 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:448:38: warning: restricted __be16 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23: warning: incorrect type in assignment (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23:    expected unsigned int [usertype] *cur_info
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23:    got restricted __le32 *
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1451:34: warning: cast to restricted __le32

Fixes: dc5399a50b45f ("mt76: reverse the first fragmented frame to 802.11")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: introduce SAR support

Add SAR spec support to mt7615 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU

Before, the hardware would be allowed to transmit injected 802.11 MPDUs
as A-MSDU. This resulted in corrupted frames being transmitted. Now,
injected MPDUs are transmitted as-is, without A-MSDU.

The fix was verified with frame injection on MT7915 hardware, both with
and without the injected frame being encrypted.

If the hardware cannot do A-MSDU aggregation on MPDUs, this problem
would also be present in the TX path where mac80211 does the 802.11
encapsulation. However, I have not observed any such problem when
disabling IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD to force that mode.
Therefore this fix is isolated to injected frames only.

The same A-MSDU logic is also present in the mt7921 driver, so it is
likely that this fix should be applied there too. I do not have access
to mt7921 hardware so I have not been able to test that.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

rtw88: change rtw_info() to proper message level

Larry reported funny log entries [1] when he used rtl8821ce. These
messages are not harmless, but not useful for users, so change them to
rtw_dbg() level. By the way, I review all rtw_info() and change others
to rtw_warn().

[1] https://lore.kernel.org/linux-wireless/c356d5ae-a7b3-3065-1121-64c446e70333@lwfinger.net/

Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220218035527.9835-1-pkshih@realtek.com

rtw89: Limit the CFO boundaries of x'tal value

Set the boundaries of x'tal value to avoid extremely adjusted results,
causing severely unexpected CFO.

Signed-off-by: Yi-Tang Chiu <chiuyitang@realtek.com>
Signed-off-by: Yuan-Han Zhang <yuanhan1020@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220218034537.9338-1-pkshih@realtek.com

rtw89: phy: handle txpwr lmt/lmt_ru of 160M bandwidth

Add handling to fill struct rtw89_txpwr_limit and rtw89_txpwr_limit_ru
for 160Mhz bandwidth case. And enlarge RTW89_5G_BW_NUM because the chip
under planning can support 160Mhz bandwidth on 5G band.

Moreover, refine the filling of OFDM entry of struct rtw89_txpwr_limit
by using the value corresponding to primary channel.

E.g. center channel 38 (40Mhz bandwidth case)
Originally OFDM entry was filled by value corresponding to 'ch - 2' (36)
Now, we consider that it could be 36 or 40.

E.g. cneter channel 42 (80Mhz bandwidth case)
Originally OFDM entry was filled by value corresponding to 'ch - 6' (36)
Now, we consider that it could be 36, 40, 44, or 48.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220218034042.9218-1-pkshih@realtek.com

rtw89: phy: handle txpwr lmt/lmt_ru of 6G band

Add declarations of 6G stuff and extend rtw89_channel_to_idx() to
map 6G's channels to 6G channel indexes. While 6G, correspondingly
read 6G's entry for tx power limit and limit_ru.

After this, we should pay attention to chip_info::support_bands.
If a chip declares 6G support, it must configure txpwr_lmt_6g and
txpwr_lmt_ru_6g in case accessing NULL pointer while setting tx power
limit/limit_ru on 6G band.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220218034017.9160-2-pkshih@realtek.com

Merge tag 'iwlwifi-next-for-kalle-2022-02-18' of git://git./linux/kernel/git/iwlwifi/iwlwifi-next

iwlwifi patches for v5.18

* Support UHB TAS enablement via BIOS;
* Remove a bunch of W=1 warnings;
* Add support for channel switch offload;
* Support a new FW API command version;
* Support 32 Rx AMPDU sessions in newer devices;
* Support a few new FW API command versions;
* Some debugging infra fixes;
* A few fixes in the HE functionality;
* Add a few new devices;
* A bunch of fixes for W=1 and W=3 warnings;
* Add support for a couple of new devices;
* Fix a potential buffer underflow;
* W=1 warnings clean up continues;
* Some improvements and fixes in scanning;
* More work on the Bz family of devices;
* Add support for band disablement via BIOS;
* Bump FW API version;
* Fix config structure for one device;
* Support a new FW API command version;
* Support new queue allocation command;
* Some more debugging improvements;
* Some other small fixes, clean-ups and improvements.

ath11k: Fix frames flush failure caused by deadlock

We are seeing below warnings:

kernel: [25393.301506] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0
kernel: [25398.421509] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0
kernel: [25398.421831] ath11k_pci 0000:01:00.0: dropping mgmt frame for vdev 0, is_started 0

this means ath11k fails to flush mgmt. frames because wmi_mgmt_tx_work
has no chance to run in 5 seconds.

By setting /proc/sys/kernel/hung_task_timeout_secs to 20 and increasing
ATH11K_FLUSH_TIMEOUT to 50 we get below warnings:

kernel: [  120.763160] INFO: task wpa_supplicant:924 blocked for more than 20 seconds.
kernel: [  120.763169]       Not tainted 5.10.90 #12
kernel: [  120.763177] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: [  120.763186] task:wpa_supplicant  state:D stack:    0 pid:  924 ppid:     1 flags:0x000043a0
kernel: [  120.763201] Call Trace:
kernel: [  120.763214]  __schedule+0x785/0x12fa
kernel: [  120.763224]  ? lockdep_hardirqs_on_prepare+0xe2/0x1bb
kernel: [  120.763242]  schedule+0x7e/0xa1
kernel: [  120.763253]  schedule_timeout+0x98/0xfe
kernel: [  120.763266]  ? run_local_timers+0x4a/0x4a
kernel: [  120.763291]  ath11k_mac_flush_tx_complete+0x197/0x2b1 [ath11k 13c3a9bf37790f4ac8103b3decf7ab4008ac314a]
kernel: [  120.763306]  ? init_wait_entry+0x2e/0x2e
kernel: [  120.763343]  __ieee80211_flush_queues+0x167/0x21f [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763378]  __ieee80211_recalc_idle+0x105/0x125 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763411]  ieee80211_recalc_idle+0x14/0x27 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763441]  ieee80211_free_chanctx+0x77/0xa2 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763473]  __ieee80211_vif_release_channel+0x100/0x131 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763540]  ieee80211_vif_release_channel+0x66/0x81 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763572]  ieee80211_destroy_auth_data+0xa3/0xe6 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763612]  ieee80211_mgd_deauth+0x178/0x29b [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763654]  cfg80211_mlme_deauth+0x1a8/0x22c [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [  120.763697]  nl80211_deauthenticate+0xfa/0x123 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [  120.763715]  genl_rcv_msg+0x392/0x3c2
kernel: [  120.763750]  ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [  120.763782]  ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [  120.763802]  ? genl_rcv+0x36/0x36
kernel: [  120.763814]  netlink_rcv_skb+0x89/0xf7
kernel: [  120.763829]  genl_rcv+0x28/0x36
kernel: [  120.763840]  netlink_unicast+0x179/0x24b
kernel: [  120.763854]  netlink_sendmsg+0x393/0x401
kernel: [  120.763872]  sock_sendmsg+0x72/0x76
kernel: [  120.763886]  ____sys_sendmsg+0x170/0x1e6
kernel: [  120.763897]  ? copy_msghdr_from_user+0x7a/0xa2
kernel: [  120.763914]  ___sys_sendmsg+0x95/0xd1
kernel: [  120.763940]  __sys_sendmsg+0x85/0xbf
kernel: [  120.763956]  do_syscall_64+0x43/0x55
kernel: [  120.763966]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
kernel: [  120.763977] RIP: 0033:0x79089f3fcc83
kernel: [  120.763986] RSP: 002b:00007ffe604f0508 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
kernel: [  120.763997] RAX: ffffffffffffffda RBX: 000059b40e987690 RCX: 000079089f3fcc83
kernel: [  120.764006] RDX: 0000000000000000 RSI: 00007ffe604f0558 RDI: 0000000000000009
kernel: [  120.764014] RBP: 00007ffe604f0540 R08: 0000000000000004 R09: 0000000000400000
kernel: [  120.764023] R10: 00007ffe604f0638 R11: 0000000000000246 R12: 000059b40ea04980
kernel: [  120.764032] R13: 00007ffe604f0638 R14: 000059b40e98c360 R15: 00007ffe604f0558
...
kernel: [  120.765230] INFO: task kworker/u32:26:4239 blocked for more than 20 seconds.
kernel: [  120.765238]       Not tainted 5.10.90 #12
kernel: [  120.765245] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: [  120.765253] task:kworker/u32:26  state:D stack:    0 pid: 4239 ppid:     2 flags:0x00004080
kernel: [  120.765284] Workqueue: phy0 ieee80211_iface_work [mac80211]
kernel: [  120.765295] Call Trace:
kernel: [  120.765306]  __schedule+0x785/0x12fa
kernel: [  120.765316]  ? find_held_lock+0x3d/0xb2
kernel: [  120.765331]  schedule+0x7e/0xa1
kernel: [  120.765340]  schedule_preempt_disabled+0x15/0x1e
kernel: [  120.765349]  __mutex_lock_common+0x561/0xc0d
kernel: [  120.765375]  ? ieee80211_sta_work+0x3e/0x1232 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.765390]  mutex_lock_nested+0x20/0x26
kernel: [  120.765416]  ieee80211_sta_work+0x3e/0x1232 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.765430]  ? skb_dequeue+0x54/0x5e
kernel: [  120.765456]  ? ieee80211_iface_work+0x7b/0x339 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.765485]  process_one_work+0x270/0x504
kernel: [  120.765501]  worker_thread+0x215/0x376
kernel: [  120.765514]  kthread+0x159/0x168
kernel: [  120.765526]  ? pr_cont_work+0x5b/0x5b
kernel: [  120.765536]  ? kthread_blkcg+0x31/0x31
kernel: [  120.765550]  ret_from_fork+0x22/0x30
...
kernel: [  120.765867] Showing all locks held in the system:
...
kernel: [  120.766164] 5 locks held by wpa_supplicant/924:
kernel: [  120.766172]  #0: ffffffffb1e63eb0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x36
kernel: [  120.766197]  #1: ffffffffb1e5b1c8 (rtnl_mutex){+.+.}-{3:3}, at: nl80211_pre_doit+0x2a/0x15c [cfg80211]
kernel: [  120.766238]  #2: ffff99f08347cd08 (&wdev->mtx){+.+.}-{3:3}, at: nl80211_deauthenticate+0xde/0x123 [cfg80211]
kernel: [  120.766279]  #3: ffff99f09df12a48 (&local->mtx){+.+.}-{3:3}, at: ieee80211_destroy_auth_data+0x9b/0xe6 [mac80211]
kernel: [  120.766321]  #4: ffff99f09df12ce0 (&local->chanctx_mtx){+.+.}-{3:3}, at: ieee80211_vif_release_channel+0x5e/0x81 [mac80211]
...
kernel: [  120.766585] 3 locks held by kworker/u32:26/4239:
kernel: [  120.766593]  #0: ffff99f04458f948 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0x19a/0x504
kernel: [  120.766621]  #1: ffffbad54b3cfe50 ((work_completion)(&sdata->work)){+.+.}-{0:0}, at: process_one_work+0x1c0/0x504
kernel: [  120.766649]  #2: ffff99f08347cd08 (&wdev->mtx){+.+.}-{3:3}, at: ieee80211_sta_work+0x3e/0x1232 [mac80211]

With above info the issue is clear: First wmi_mgmt_tx_work is inserted
to local->workqueue after sdata->work inserted, then wpa_supplicant
acquires wdev->mtx in nl80211_deauthenticate and finally calls
ath11k_mac_op_flush where it waits all mgmt. frames to be sent out by
wmi_mgmt_tx_work. Meanwhile, sdata->work is blocked by wdev->mtx in
ieee80211_sta_work, as a result wmi_mgmt_tx_work has no chance to run.

Change to use ab->workqueue instead of local->workqueue to fix this issue.

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220217084545.18844-1-quic_bqiang@quicinc.com

ath11k: Handle failure in qmi firmware ready

In some scenarios like firmware crashes during init time
and hardware gets restarted after qmi firmware ready event.
During restart, ath11k_core_qmi_firmware_ready() returns timeout.
But, this failure is not handled and ATH11K_FLAG_REGISTERED is set.

When hardware restart completed, firmware sends firmware ready event
again. Since ATH11K_FLAG_REGISTERED is already set, ath11k handles
this as core restart. Inits are not done because of previous timeout.
But ath11k_core_restart does deinit's which causes NULL pointer crash.

Fix this by handling failure from ath11k_core_qmi_firmware_ready().

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-00881-QCAHKSWPL_SILICONZ-1

Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1645079195-13564-1-git-send-email-quic_seevalam@quicinc.com

ath11k: Invalidate cached reo ring entry before accessing it

REO2SW ring descriptor is currently allocated in cacheable memory.
While reaping reo ring entries on second trial after updating head
pointer, first entry is not invalidated before accessing it.

This results in host reaping and using cached descriptor which is
already overwritten in memory by DMA device (HW).
Since the contents of descriptor(buffer id, peer info and other information
bits) are outdated host throws errors like below while parsing corresponding
MSDU's and drops them.

[347712.048904] ath11k_pci 0004:01:00.0: msdu_done bit in attention is not set
[349173.355503] ath11k_pci 0004:01:00.0: frame rx with invalid buf_id 962

Move the try_again: label above  ath11k_hal_srng_access_begin()
so that first entry will be invalidated and prefetched.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Fixes: 6452f0a3d565 ("ath11k: allocate dst ring descriptors from cacheable memory")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1645000354-32558-1-git-send-email-quic_ramess@quicinc.com