ALSA: aoa: Fix I2S device accounting

[ Upstream commit f1fae475f10a26b7e34da4ff2e2f19b7feb3548e ]

i2sbus_add_dev() is supposed to return the number of probed devices,
i.e. either 1 or 0.  However, i2sbus_add_dev() has one error handling
that returns -ENODEV; this will screw up the accumulation number
counted in the caller, i2sbus_probe().

Fix the return value to 0 and add the comment for better understanding
for readers.

Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Link: https://lore.kernel.org/r/20221027065233.13292-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()

[ Upstream commit 4a4c8482e370d697738a78dcd7bf2780832cb712 ]

dev_set_name() in soundbus_add_one() allocates memory for name, it need be
freed when of_device_register() fails, call soundbus_dev_put() to give up
the reference that hold in device_initialize(), so that it can be freed in
kobject_cleanup() when the refcount hit to 0. And other resources are also
freed in i2sbus_release_dev(), so it can return 0 directly.

Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221027013438.991920-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fec: limit register access on i.MX6UL

[ Upstream commit 0a8b43b12dd78daa77a7dc007b92770d262a2714 ]

Using 'ethtool -d […]' on an i.MX6UL leads to a kernel crash:

   Unhandled fault: external abort on non-linefetch (0x1008) at […]

due to this SoC has less registers in its FEC implementation compared to other
i.MX6 variants. Thus, a run-time decision is required to avoid access to
non-existing registers.

Fixes: a51d3ab50702 ("net: fec: use a more proper compatible string for i.MX6UL type device")
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221024080552.21004-1-jbe@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: domains: Fix handling of unavailable/disabled idle states

[ Upstream commit e0c57a5c70c13317238cb19a7ded0eab4a5f7de5 ]

Platforms can provide the information about the availability of each
idle states via status flag. Platforms may have to disable one or more
idle states for various reasons like broken firmware or other unmet
dependencies.

Fix handling of such unavailable/disabled idle states by ignoring them
while parsing the states.

Fixes: a3381e3a65cb ("PM / domains: Fix up domain-idle-states OF parsing")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ksz884x: fix missing pci_disable_device() on error in pcidev_init()

[ Upstream commit 5da6d65590a0698199df44d095e54b0ed1708178 ]

pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release()
while unbinding device.

Fixes: 8ca86fd83eae ("net: Micrel KSZ8841/2 PCI Ethernet driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221024131338.2848959-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix flow-type by setting GL_HASH_INSET registers

[ Upstream commit 3b32c9932853e11d71f9db012d69e92e4669ba23 ]

Fix setting bits for specific flow_type for GLQF_HASH_INSET register.
In previous version all of the bits were set only in hena register, while
in inset only one bit was set. In order for this working correctly on all
types of cards these bits needs to be set correctly for both hena and inset
registers.

Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221024100526.1874914-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix VF hang when reset is triggered on another VF

[ Upstream commit 52424f974bc53c26ba3f00300a00e9de9afcd972 ]

When a reset was triggered on one VF with i40e_reset_vf
global PF state __I40E_VF_DISABLE was set on a PF until
the reset finished. If immediately after triggering reset
on one VF there is a request to reset on another
it will cause a hang on VF side because VF will be notified
of incoming reset but the reset will never happen because
of this global state, we will get such error message:

[  +4.890195] iavf 0000:86:02.1: Never saw reset

and VF will hang waiting for the reset to be triggered.

Fix this by introducing new VF state I40E_VF_STATE_RESETTING
that will be set on a VF if it is currently resetting instead of
the global __I40E_VF_DISABLE PF state.

Fixes: 3ba9bcb4b68f ("i40e: add locking around VF reset")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221024100526.1874914-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix ethtool rx-flow-hash setting for X722

[ Upstream commit 54b5af5a438076082d482cab105b1bd484ab5074 ]

When enabling flow type for RSS hash via ethtool:

ethtool -N $pf rx-flow-hash tcp4|tcp6|udp4|udp6 s|d

the driver would fail to setup this setting on X722
device since it was using the mask on the register
dedicated for X710 devices.

Apply a different mask on the register when setting the
RSS hash for the X722 device.

When displaying the flow types enabled via ethtool:

ethtool -n $pf rx-flow-hash tcp4|tcp6|udp4|udp6

the driver would print wrong values for X722 device.

Fix this issue by testing masks for X722 device in
i40e_get_rss_hash_opts function.

Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221024100526.1874914-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: ensure sane device mtu in tunnels

[ Upstream commit d89d7ff01235f218dad37de84457717f699dee79 ]

Another syzbot report [1] with no reproducer hints
at a bug in ip6_gre tunnel (dev:ip6gretap0)

Since ipv6 mcast code makes sure to read dev->mtu once
and applies a sanity check on it (see commit b9b312a7a451
"ipv6: mcast: better catch silly mtu values"), a remaining
possibility is that a layer is able to set dev->mtu to
an underflowed value (high order bit set).

This could happen indeed in ip6gre_tnl_link_config_route(),
ip6_tnl_link_config() and ipip6_tunnel_bind_dev()

Make sure to sanitize mtu value in a local variable before
it is written once on dev->mtu, as lockless readers could
catch wrong temporary value.

[1]
skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:120
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022
Workqueue: mld mld_ifc_work
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116
lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116
sp : ffff800020dd3b60
x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800
x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200
x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38
x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9
x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80
x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80
x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00
x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000
x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000
x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089
Call trace:
skb_panic+0x4c/0x50 net/core/skbuff.c:116
skb_over_panic net/core/skbuff.c:125 [inline]
skb_put+0xd4/0xdc net/core/skbuff.c:2049
ip6_mc_hdr net/ipv6/mcast.c:1714 [inline]
mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765
add_grhead net/ipv6/mcast.c:1851 [inline]
add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989
mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115
mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000)

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vivid: set num_in/outputs to 0 if not supported

[ Upstream commit 69d78a80da4ef12faf2a6f9cfa2097ab4ac43983 ]

If node_types does not have video/vbi/meta inputs or outputs,
then set num_inputs/num_outputs to 0 instead of 1.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0c90f649d2f5 (media: vivid: add vivid_create_queue() helper)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'

[ Upstream commit 8da7f0976b9071b528c545008de9d10cc81883b1 ]

If it is a progressive (non-interlaced) format, then ignore the
interlaced timing values.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7f68127fa11f ([media] videodev2.h: defines to calculate blanking and frame sizes)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2-dv-timings: add sanity checks for blanking values

[ Upstream commit 4b6d66a45ed34a15721cb9e11492fa1a24bc83df ]

Add sanity checks to v4l2_valid_dv_timings() to ensure that the provided
blanking values are reasonable.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b18787ed1ce3 ([media] v4l2-dv-timings: add new helper module)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vivid: dev->bitmap_cap wasn't freed in all cases

[ Upstream commit 1f65ea411cc7b6ff128d82a3493d7b5648054e6f ]

Whenever the compose width/height values change, the dev->bitmap_cap
vmalloc'ed array must be freed and dev->bitmap_cap set to NULL.

This was done in some places, but not all. This is only an issue if
overlay support is enabled and the bitmap clipping is used.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vivid: s_fbuf: add more sanity checks

[ Upstream commit f8bcaf714abfc94818dff8c0db84d750433984f4 ]

VIDIOC_S_FBUF is by definition a scary ioctl, which is why only root
can use it. But at least check if the framebuffer parameters match that
of one of the framebuffer created by vivid, and reject anything else.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: hibernate: Allow hybrid sleep to work with s2idle

[ Upstream commit 85850af4fc47132f3f2f0dd698b90f67906600b4 ]

Hybrid sleep is currently hardcoded to only operate with S3 even
on systems that might not support it.

Instead of assuming this mode is what the user wants to use, for
hybrid sleep follow the setting of `mem_sleep_current` which
will respect mem_sleep_default kernel command line and policy
decisions made by the presence of the FADT low power idle bit.

Fixes: 81d45bdf8913 ("PM / hibernate: Untangle power_down()")
Reported-and-tested-by: kolAflash <kolAflash@kolahilft.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216574
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: mcp251x: mcp251x_can_probe(): add missing unregister_candev() in error path

[ Upstream commit b1a09b63684cea56774786ca14c13b7041ffee63 ]

In mcp251x_can_probe(), if mcp251x_gpio_setup() fails, it forgets to
unregister the CAN device.

Fix this by unregistering can device in mcp251x_can_probe().

Fixes: 2d52dabbef60 ("can: mcp251x: add GPIO support")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/all/20221024090256.717236-1-dzm91@hust.edu.cn
[mkl: adjust label]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: mscan: mpc5xxx: mpc5xxx_can_probe(): add missing put_clock() in error path

[ Upstream commit 3e5b3418827cefb5e1cc658806f02965791b8f07 ]

The commit 1149108e2fbf ("can: mscan: improve clock API use") only
adds put_clock() in mpc5xxx_can_remove() function, forgetting to add
put_clock() in the error handling code.

Fix this bug by adding put_clock() in the error handling code.

Fixes: 1149108e2fbf ("can: mscan: improve clock API use")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/all/20221024133828.35881-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix indefinite deferral of RTO with SACK reneging

[ Upstream commit 3d2af9cce3133b3bc596a9d065c6f9d93419ccfb ]

This commit fixes a bug that can cause a TCP data sender to repeatedly
defer RTOs when encountering SACK reneging.

The bug is that when we're in fast recovery in a scenario with SACK
reneging, every time we get an ACK we call tcp_check_sack_reneging()
and it can note the apparent SACK reneging and rearm the RTO timer for
srtt/2 into the future. In some SACK reneging scenarios that can
happen repeatedly until the receive window fills up, at which point
the sender can't send any more, the ACKs stop arriving, and the RTO
fires at srtt/2 after the last ACK. But that can take far too long
(O(10 secs)), since the connection is stuck in fast recovery with a
low cwnd that cannot grow beyond ssthresh, even if more bandwidth is
available.

This fix changes the logic in tcp_check_sack_reneging() to only rearm
the RTO timer if data is cumulatively ACKed, indicating forward
progress. This avoids this kind of nearly infinite loop of RTO timer
re-arming. In addition, this meets the goals of
tcp_check_sack_reneging() in handling Windows TCP behavior that looks
temporarily like SACK reneging but is not really.

Many thanks to Jakub Kicinski and Neil Spring, who reported this issue
and provided critical packet traces that enabled root-causing this
issue. Also, many thanks to Jakub Kicinski for testing this fix.

Fixes: 5ae344c949e7 ("tcp: reduce spurious retransmits due to transient SACK reneging")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Neil Spring <ntspring@fb.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20221021170821.1093930-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix a signed-integer-overflow bug in tcp_add_backlog()

[ Upstream commit ec791d8149ff60c40ad2074af3b92a39c916a03f ]

The type of sk_rcvbuf and sk_sndbuf in struct sock is int, and
in tcp_add_backlog(), the variable limit is caculated by adding
sk_rcvbuf, sk_sndbuf and 64 * 1024, it may exceed the max value
of int and overflow. This patch reduces the limit budget by
halving the sndbuf to solve this issue since ACK packets are much
smaller than the payload.

Fixes: c9c3321257e1 ("tcp: add tcp_add_backlog()")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: minor optimization in tcp_add_backlog()

[ Upstream commit d519f350967a60b85a574ad8aeac43f2b4384746 ]

If packet is going to be coalesced, sk_sndbuf/sk_rcvbuf values
are not used. Defer their access to the point we need them.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: ec791d8149ff ("tcp: fix a signed-integer-overflow bug in tcp_add_backlog()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY

[ Upstream commit 9c1eaa27ec599fcc25ed4970c0b73c247d147a2b ]

The ndo_start_xmit() method must not free skb when returning
NETDEV_TX_BUSY, since caller is going to requeue freed skb.

Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed

[ Upstream commit d266935ac43d57586e311a087510fe6a084af742 ]

When the ops_init() interface is invoked to initialize the net, but
ops->init() fails, data is released. However, the ptr pointer in
net->gen is invalid. In this case, when nfqnl_nf_hook_drop() is invoked
to release the net, invalid address access occurs.

The process is as follows:
setup_net()
ops_init()
data = kzalloc(...)   ---> alloc "data"
net_assign_generic()  ---> assign "date" to ptr in net->gen
...
ops->init()           ---> failed
...
kfree(data);          ---> ptr in net->gen is invalid
...
ops_exit_list()
...
nfqnl_nf_hook_drop()
*q = nfnl_queue_pernet(net) ---> q is invalid

The following is the Call Trace information:
BUG: KASAN: use-after-free in nfqnl_nf_hook_drop+0x264/0x280
Read of size 8 at addr ffff88810396b240 by task ip/15855
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
print_report+0x155/0x454
kasan_report+0xba/0x1f0
nfqnl_nf_hook_drop+0x264/0x280
nf_queue_nf_hook_drop+0x8b/0x1b0
__nf_unregister_net_hook+0x1ae/0x5a0
nf_unregister_net_hooks+0xde/0x130
ops_exit_list+0xb0/0x170
setup_net+0x7ac/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>

Allocated by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0xa1/0xb0
__kmalloc+0x49/0xb0
ops_init+0xe7/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x155/0x1b0
slab_free_freelist_hook+0x11b/0x220
__kmem_cache_free+0xa4/0x360
ops_init+0xb9/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: f875bae06533 ("net: Automatically allocate per namespace data.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kcm: annotate data-races around kcm->rx_wait

[ Upstream commit 0c745b5141a45a076f1cb9772a399f7ebcb0948a ]

kcm->rx_psock can be read locklessly in kcm_rfree().
Annotate the read and writes accordingly.

syzbot reported:

BUG: KCSAN: data-race in kcm_rcv_strparser / kcm_rfree

write to 0xffff88810784e3d0 of 1 bytes by task 1823 on cpu 1:
reserve_rx_kcm net/kcm/kcmsock.c:283 [inline]
kcm_rcv_strparser+0x250/0x3a0 net/kcm/kcmsock.c:363
__strp_recv+0x64c/0xd20 net/strparser/strparser.c:301
strp_recv+0x6d/0x80 net/strparser/strparser.c:335
tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703
strp_read_sock net/strparser/strparser.c:358 [inline]
do_strp_work net/strparser/strparser.c:406 [inline]
strp_work+0xe8/0x180 net/strparser/strparser.c:415
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

read to 0xffff88810784e3d0 of 1 bytes by task 17869 on cpu 0:
kcm_rfree+0x121/0x220 net/kcm/kcmsock.c:181
skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891
kfree_skb include/linux/skbuff.h:1216 [inline]
kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161
____sys_recvmsg+0x16c/0x2e0
___sys_recvmsg net/socket.c:2743 [inline]
do_recvmmsg+0x2f1/0x710 net/socket.c:2837
__sys_recvmmsg net/socket.c:2916 [inline]
__do_sys_recvmmsg net/socket.c:2939 [inline]
__se_sys_recvmmsg net/socket.c:2932 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x01 -> 0x00

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146467a-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kcm: annotate data-races around kcm->rx_psock

[ Upstream commit 15e4dabda11b0fa31d510a915d1a580f47dfc92e ]

kcm->rx_psock can be read locklessly in kcm_rfree().
Annotate the read and writes accordingly.

We do the same for kcm->rx_wait in the following patch.

syzbot reported:
BUG: KCSAN: data-race in kcm_rfree / unreserve_rx_kcm

write to 0xffff888123d827b8 of 8 bytes by task 2758 on cpu 1:
unreserve_rx_kcm+0x72/0x1f0 net/kcm/kcmsock.c:313
kcm_rcv_strparser+0x2b5/0x3a0 net/kcm/kcmsock.c:373
__strp_recv+0x64c/0xd20 net/strparser/strparser.c:301
strp_recv+0x6d/0x80 net/strparser/strparser.c:335
tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703
strp_read_sock net/strparser/strparser.c:358 [inline]
do_strp_work net/strparser/strparser.c:406 [inline]
strp_work+0xe8/0x180 net/strparser/strparser.c:415
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

read to 0xffff888123d827b8 of 8 bytes by task 5859 on cpu 0:
kcm_rfree+0x14c/0x220 net/kcm/kcmsock.c:181
skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891
kfree_skb include/linux/skbuff.h:1216 [inline]
kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161
____sys_recvmsg+0x16c/0x2e0
___sys_recvmsg net/socket.c:2743 [inline]
do_recvmmsg+0x2f1/0x710 net/socket.c:2837
__sys_recvmmsg net/socket.c:2916 [inline]
__do_sys_recvmmsg net/socket.c:2939 [inline]
__se_sys_recvmmsg net/socket.c:2932 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0xffff88812971ce00 -> 0x0000000000000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 5859 Comm: syz-executor.3 Not tainted 6.0.0-syzkaller-12189-g19d17ab7c68b-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atlantic: fix deadlock at aq_nic_stop

[ Upstream commit 6960d133f66ecddcd3af2b1cbd0c7dcd104268b8 ]

NIC is stopped with rtnl_lock held, and during the stop it cancels the
'service_task' work and free irqs.

However, if CONFIG_MACSEC is set, rtnl_lock is acquired both from
aq_nic_service_task and aq_linkstate_threaded_isr. Then a deadlock
happens if aq_nic_stop tries to cancel/disable them when they've already
started their execution.

As the deadlock is caused by rtnl_lock, it causes many other processes
to stall, not only atlantic related stuff.

Fix it by introducing a mutex that protects each NIC's macsec related
data, and locking it instead of the rtnl_lock from the service task and
the threaded IRQ.

Before this patch, all macsec data was protected with rtnl_lock, but
maybe not all of it needs to be protected. With this new mutex, further
efforts can be made to limit the protected data only to that which
requires it. However, probably it doesn't worth it because all macsec's
data accesses are infrequent, and almost all are done from macsec_ops
or ethtool callbacks, called holding rtnl_lock, so macsec_mutex won't
never be much contended.

The issue appeared repeteadly attaching and deattaching the NIC to a
bond interface. Doing that after this patch I cannot reproduce the bug.

Fixes: 62c1c2e606f6 ("net: atlantic: MACSec offload skeleton")
Reported-by: Li Liang <liali@redhat.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd-xgbe: add the bit rate quirk for Molex cables

[ Upstream commit 170a9e341a3b02c0b2ea0df16ef14a33a4f41de8 ]

The offset 12 (bit-rate) of EEPROM SFP DAC (passive) cables is expected
to be in the range 0x64 to 0x68. However, the 5 meter and 7 meter Molex
passive cables have the rate ceiling 0x78 at offset 12.

Add a quirk for Molex passive cables to extend the rate ceiling to 0x78.

Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd-xgbe: fix the SFP compliance codes check for DAC cables

[ Upstream commit 09c5f6bf11ac98874339e55f4f5f79a9dbc9b375 ]

The current XGBE code assumes that offset 6 of EEPROM SFP DAC (passive)
cables is NULL. However, some cables (the 5 meter and 7 meter Molex
passive cables) have non-zero data at offset 6. Fix the logic by moving
the passive cable check above the active checks, so as not to be
improperly identified as an active cable. This will fix the issue for
any passive cable that advertises 1000Base-CX in offset 6.

Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/unwind/orc: Fix unreliable stack dump with gcov

[ Upstream commit 230db82413c091bc16acee72650f48d419cebe49 ]

When a console stack dump is initiated with CONFIG_GCOV_PROFILE_ALL
enabled, show_trace_log_lvl() gets out of sync with the ORC unwinder,
causing the stack trace to show all text addresses as unreliable:

  # echo l > /proc/sysrq-trigger
  [  477.521031] sysrq: Show backtrace of all active CPUs
  [  477.523813] NMI backtrace for cpu 0
  [  477.524492] CPU: 0 PID: 1021 Comm: bash Not tainted 6.0.0 #65
  [  477.525295] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
  [  477.526439] Call Trace:
  [  477.526854]  <TASK>
  [  477.527216]  ? dump_stack_lvl+0xc7/0x114
  [  477.527801]  ? dump_stack+0x13/0x1f
  [  477.528331]  ? nmi_cpu_backtrace.cold+0xb5/0x10d
  [  477.528998]  ? lapic_can_unplug_cpu+0xa0/0xa0
  [  477.529641]  ? nmi_trigger_cpumask_backtrace+0x16a/0x1f0
  [  477.530393]  ? arch_trigger_cpumask_backtrace+0x1d/0x30
  [  477.531136]  ? sysrq_handle_showallcpus+0x1b/0x30
  [  477.531818]  ? __handle_sysrq.cold+0x4e/0x1ae
  [  477.532451]  ? write_sysrq_trigger+0x63/0x80
  [  477.533080]  ? proc_reg_write+0x92/0x110
  [  477.533663]  ? vfs_write+0x174/0x530
  [  477.534265]  ? handle_mm_fault+0x16f/0x500
  [  477.534940]  ? ksys_write+0x7b/0x170
  [  477.535543]  ? __x64_sys_write+0x1d/0x30
  [  477.536191]  ? do_syscall_64+0x6b/0x100
  [  477.536809]  ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
  [  477.537609]  </TASK>

This happens when the compiled code for show_stack() has a single word
on the stack, and doesn't use a tail call to show_stack_log_lvl().
(CONFIG_GCOV_PROFILE_ALL=y is the only known case of this.)  Then the
__unwind_start() skip logic hits an off-by-one bug and fails to unwind
all the way to the intended starting frame.

Fix it by reverting the following commit:

  f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")

The original justification for that commit no longer exists.  That
original issue was later fixed in a different way, with the following
commit:

  f2ac57a4c49d ("x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels")

Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
[jpoimboe: rewrite commit log]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hinic: fix the issue of double release MBOX callback of VF

[ Upstream commit 8ec2f4c6b2e11a4249bba77460f0cfe6d95a82f8 ]

In hinic_vf_func_init(), if VF fails to register information with PF
through the MBOX, the MBOX callback function of VF is released once. But
it is released again in hinic_init_hwdev(). Remove one.

Fixes: 7dd29ee12865 ("hinic: add sriov feature support")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hinic: fix the issue of CMDQ memory leaks

[ Upstream commit 363cc87767f6ddcfb9158ad2e2afa2f8d5c4b94e ]

When hinic_set_cmdq_depth() fails in hinic_init_cmdqs(), the cmdq memory is
not released correctly. Fix it.

Fixes: 72ef908bb3ff ("hinic: add three net_device_ops of vf")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hinic: fix memory leak when reading function table

[ Upstream commit 4c1f602df8956bc0decdafd7e4fc7eef50c550b1 ]

When the input parameter idx meets the expected case option in
hinic_dbg_get_func_table(), read_data is not released. Fix it.

Fixes: 5215e16244ee ("hinic: add support to query function table")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hinic: fix incorrect assignment issue in hinic_set_interrupt_cfg()

[ Upstream commit c0605cd6750f2db9890c43a91ea4d77be8fb4908 ]

The value of lli_credit_cnt is incorrectly assigned, fix it.

Fixes: a0337c0dee68 ("hinic: add support to set and get irq coalesce")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: netsec: fix error handling in netsec_register_mdio()

[ Upstream commit 94423589689124e8cd145b38a1034be7f25835b2 ]

If phy_device_register() fails, phy_device_free() need be called to
put refcount, so memory of phy device and device name can be freed
in callback function.

If get_phy_device() fails, mdiobus_unregister() need be called,
or it will cause warning in mdiobus_free() and kobject is leaked.

Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221019064104.3228892-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix a null-ptr-deref in tipc_topsrv_accept

[ Upstream commit 82cb4e4612c633a9ce320e1773114875604a3cce ]

syzbot found a crash in tipc_topsrv_accept:

  KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
  Workqueue: tipc_rcv tipc_topsrv_accept
  RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487
  Call Trace:
   <TASK>
   tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460
   process_one_work+0x991/0x1610 kernel/workqueue.c:2289
   worker_thread+0x665/0x1080 kernel/workqueue.c:2436
   kthread+0x2e4/0x3a0 kernel/kthread.c:376
   ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

It was caused by srv->listener that might be set to null by
tipc_topsrv_stop() in net .exit whereas it's still used in
tipc_topsrv_accept() worker.

srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add
a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to
avoid the null-ptr-deref. To ensure the lsock is not released during the
tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop()
where it's waiting until the tipc_topsrv_accept worker to be done.

Note that sk_callback_lock is used to protect sk->sk_user_data instead of
srv->listener, and it should check srv in tipc_topsrv_listener_data_ready()
instead. This also ensures that no more tipc_topsrv_accept worker will be
started after tipc_conn_close() is called in tipc_topsrv_stop() where it
sets sk->sk_user_data to null.

Fixes: 0ef897be12b8 ("tipc: separate topology server listener socket from subcsriber sockets")
Reported-by: syzbot+c5ce866a8d30f4be0651@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/4eee264380c409c61c6451af1059b7fb271a7e7b.1666120790.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()

[ Upstream commit b329f5ddc9ce4b622d9c7aaf5c6df4de52caf91a ]

clear_cpu_cap(&boot_cpu_data) is very similar to setup_clear_cpu_cap()
except that the latter also sets a bit in 'cpu_caps_cleared' which
later clears the same cap in secondary cpus, which is likely what is
meant here.

Fixes: 47125db27e47 ("perf/x86/intel/lbr: Support Architectural LBR")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20220718141123.136106-2-mlevitsk@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()

[ Upstream commit 4881bda5ea05c8c240fc8afeaa928e2bc43f61fa ]

If device_register() fails in snd_ac97_dev_register(), it should
call put_device() to give up reference, or the name allocated in
dev_set_name() is leaked.

Fixes: 0ca06a00e206 ("[ALSA] AC97 bus interface for ad-hoc drivers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221019093025.1179475-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: lpass-cpu: Mark HDMI TX parity register as volatile

[ Upstream commit 1dd5166102e7ca91e8c5d833110333835e147ddb ]

Update LPASS_HDMI_TX_PARITY_ADDR register as volatile, to fix
dp audio failures observed with some of external monitors.

Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver")

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1665825530-7593-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arc: iounmap() arg is volatile

[ Upstream commit c44f15c1c09481d50fd33478ebb5b8284f8f5edb ]

Add 'volatile' to iounmap()'s argument to prevent build warnings.
This make it the same as other major architectures.

Placates these warnings: (12 such warnings)

../drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe':
../drivers/video/fbdev/riva/fbdev.c:2067:42: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Werror=discarded-qualifiers]
 2067 |                 iounmap(default_par->riva.PRAMIN);

Fixes: 1162b0701b14b ("ARC: I/O and DMA Mappings")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: lpass-cpu: mark HDMI TX registers as volatile

[ Upstream commit c9a3545b1d771fb7b06a487796c40288c02c41c5 ]

Update HDMI volatile registers list as DMA, Channel Selection registers,
vbit control registers are being reflected by hardware DP port
disconnection.

This update is required to fix no display and no sound issue observed
after reconnecting TAMA/SANWA DP cables.
Once DP cable is unplugged, DMA control registers are being reset by
hardware, however at second plugin, new dma control values does not
updated to the dma hardware registers since new register value and
cached values at the time of first plugin are same.

Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver")

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Link: https://lore.kernel.org/r/1665637711-13300-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix return type of mdp4_lvds_connector_mode_valid

[ Upstream commit 0b33a33bd15d5bab73b87152b220a8d0153a4587 ]

The mode_valid field in drm_connector_helper_funcs is expected to be of
type:
enum drm_mode_status (* mode_valid) (struct drm_connector *connector,
                                     struct drm_display_mode *mode);

The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.

The return type of mdp4_lvds_connector_mode_valid should be changed from
int to enum drm_mode_status.

Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Fixes: 3e87599b68e7 ("drm/msm/mdp4: add LVDS panel support")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/502878/
Link: https://lore.kernel.org/r/20220913205551.155128-1-nhuck@google.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2: Fix v4l2_i2c_subdev_set_name function documentation

[ Upstream commit bb9ea2c31fa11b789ade4c3abcdda3c5370a76ab ]

The doc says the I²C device's name is used if devname is NULL, but
actually the I²C device driver's name is used.

Fixes: 0658293012af ("media: v4l: subdev: Add a function to set an I²C sub-device's name")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: fix error return code in dgram_bind()

commit 444d8ad4916edec8a9fc684e841287db9b1e999f upstream.

Fix to return error code -EINVAL from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 94160108a70c ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220919160830.1436109-1-weiyongjun@huaweicloud.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages

commit 12df140f0bdfae5dcfc81800970dd7f6f632e00c upstream.

The h->*_huge_pages counters are protected by the hugetlb_lock, but
alloc_huge_page has a corner case where it can decrement the counter
outside of the lock.

This could lead to a corrupted value of h->resv_huge_pages, which we have
observed on our systems.

Take the hugetlb_lock before decrementing h->resv_huge_pages to avoid a
potential race.

Link: https://lkml.kernel.org/r/20221017202505.0e6a4fcd@imladris.surriel.com
Fixes: a88c76954804 ("mm: hugetlb: fix hugepage memory leak caused by wrong reserve count")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Glen McCready <gkmccready@meta.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory: add non-anonymous page check in the copy_present_page()

The vma->anon_vma of the child process may be NULL because
the entire vma does not contain anonymous pages. In this
case, a BUG will occur when the copy_present_page() passes
a copy of a non-anonymous page of that vma to the
page_add_new_anon_rmap() to set up new anonymous rmap.

------------[ cut here ]------------
kernel BUG at mm/rmap.c:1044!
Internal error: Oops - BUG: 0 [#1] SMP
Modules linked in:
CPU: 2 PID: 3617 Comm: test Not tainted 5.10.149 #1
Hardware name: linux,dummy-virt (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
pc : __page_set_anon_rmap+0xbc/0xf8
lr : __page_set_anon_rmap+0xbc/0xf8
sp : ffff800014c1b870
x29: ffff800014c1b870 x28: 0000000000000001
x27: 0000000010100073 x26: ffff1d65c517baa8
x25: ffff1d65cab0f000 x24: ffff1d65c416d800
x23: ffff1d65cab5f248 x22: 0000000020000000
x21: 0000000000000001 x20: 0000000000000000
x19: fffffe75970023c0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000
x9 : ffffc3096d5fb858 x8 : 0000000000000000
x7 : 0000000000000011 x6 : ffff5a5c9089c000
x5 : 0000000000020000 x4 : ffff5a5c9089c000
x3 : ffffc3096d200000 x2 : ffffc3096e8d0000
x1 : ffff1d65ca3da740 x0 : 0000000000000000
Call trace:
 __page_set_anon_rmap+0xbc/0xf8
 page_add_new_anon_rmap+0x1e0/0x390
 copy_pte_range+0xd00/0x1248
 copy_page_range+0x39c/0x620
 dup_mmap+0x2e0/0x5a8
 dup_mm+0x78/0x140
 copy_process+0x918/0x1a20
 kernel_clone+0xac/0x638
 __do_sys_clone+0x78/0xb0
 __arm64_sys_clone+0x30/0x40
 el0_svc_common.constprop.0+0xb0/0x308
 do_el0_svc+0x48/0xb8
 el0_svc+0x24/0x38
 el0_sync_handler+0x160/0x168
 el0_sync+0x180/0x1c0
Code: 97f8ff85 f9400294 17ffffeb 97f8ff82 (d4210000)
---[ end trace a972347688dc9bd4 ]---
Kernel panic - not syncing: Oops - BUG: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: 0x43095d200000 from 0xffff800010000000
PHYS_OFFSET: 0xffffe29a80000000
CPU features: 0x08200022,61806082
Memory Limit: none
---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]---

This problem has been fixed by the commit <fb3d824d1a46>
("mm/rmap: split page_dup_rmap() into page_dup_file_rmap()
and page_try_dup_anon_rmap()"), but still exists in the
linux-5.10.y branch.

This patch is not applicable to this version because
of the large version differences. Therefore, fix it by
adding non-anonymous page check in the copy_present_page().

Cc: stable@vger.kernel.org
Fixes: 70e806e4e645 ("mm: Do early cow for pinned pages during fork() for ptes")
Signed-off-by: Yuanzheng Song <songyuanzheng@huawei.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/gntdev: Prevent leaking grants

commit 0991028cd49567d7016d1b224fe0117c35059f86 upstream.

Prior to this commit, if a grant mapping operation failed partially,
some of the entries in the map_ops array would be invalid, whereas all
of the entries in the kmap_ops array would be valid. This in turn would
cause the following logic in gntdev_map_grant_pages to become invalid:

  for (i = 0; i < map->count; i++) {
    if (map->map_ops[i].status == GNTST_okay) {
      map->unmap_ops[i].handle = map->map_ops[i].handle;
      if (!use_ptemod)
        alloced++;
    }
    if (use_ptemod) {
      if (map->kmap_ops[i].status == GNTST_okay) {
        if (map->map_ops[i].status == GNTST_okay)
          alloced++;
        map->kunmap_ops[i].handle = map->kmap_ops[i].handle;
      }
    }
  }
  ...
  atomic_add(alloced, &map->live_grants);

Assume that use_ptemod is true (i.e., the domain mapping the granted
pages is a paravirtualized domain). In the code excerpt above, note that
the "alloced" variable is only incremented when both kmap_ops[i].status
and map_ops[i].status are set to GNTST_okay (i.e., both mapping
operations are successful).  However, as also noted above, there are
cases where a grant mapping operation fails partially, breaking the
assumption of the code excerpt above.

The aforementioned causes map->live_grants to be incorrectly set. In
some cases, all of the map_ops mappings fail, but all of the kmap_ops
mappings succeed, meaning that live_grants may remain zero. This in turn
makes it impossible to unmap the successfully grant-mapped pages pointed
to by kmap_ops, because unmap_grant_pages has the following snippet of
code at its beginning:

  if (atomic_read(&map->live_grants) == 0)
    return; /* Nothing to do */

In other cases where only some of the map_ops mappings fail but all
kmap_ops mappings succeed, live_grants is made positive, but when the
user requests unmapping the grant-mapped pages, __unmap_grant_pages_done
will then make map->live_grants negative, because the latter function
does not check if all of the pages that were requested to be unmapped
were actually unmapped, and the same function unconditionally subtracts
"data->count" (i.e., a value that can be greater than map->live_grants)
from map->live_grants. The side effects of a negative live_grants value
have not been studied.

The net effect of all of this is that grant references are leaked in one
of the above conditions. In Qubes OS v4.1 (which uses Xen's grant
mechanism extensively for X11 GUI isolation), this issue manifests
itself with warning messages like the following to be printed out by the
Linux kernel in the VM that had granted pages (that contain X11 GUI
window data) to dom0: "g.e. 0x1234 still pending", especially after the
user rapidly resizes GUI VM windows (causing some grant-mapping
operations to partially or completely fail, due to the fact that the VM
unshares some of the pages as part of the window resizing, making the
pages impossible to grant-map from dom0).

The fix for this issue involves counting all successful map_ops and
kmap_ops mappings separately, and then adding the sum to live_grants.
During unmapping, only the number of successfully unmapped grants is
subtracted from live_grants. The code is also modified to check for
negative live_grants values after the subtraction and warn the user.

Link: https://github.com/QubesOS/qubes-issues/issues/7631
Fixes: dbe97cff7dd9 ("xen/gntdev: Avoid blocking in unmap_grant_pages()")
Cc: stable@vger.kernel.org
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Acked-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221002222006.2077-2-m.v.b@runbox.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/gntdev: don't ignore kernel unmapping error

commit f28347cc66395e96712f5c2db0a302ee75bafce6 upstream.

While working on XSA-361 and its follow-ups, I failed to spot another
place where the kernel mapping part of an operation was not treated the
same as the user space part. Detect and propagate errors and add a 2nd
pr_debug().

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/c2513395-74dc-aea3-9192-fd265aa44e35@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Co-authored-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pci: add missing EX_TABLE entries to __pcistg_mio_inuser()/__pcilg_mio_inuser()

commit 6ec803025cf3173a57222e4411097166bd06fa98 upstream.

For some exception types the instruction address points behind the
instruction that caused the exception. Take that into account and add
the missing exception table entry.

Cc: <stable@vger.kernel.org>
Fixes: f058599e22d5 ("s390/pci: Fix s390_mmio_read/write with MIO")
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/futex: add missing EX_TABLE entry to __futex_atomic_op()

commit a262d3ad6a433e4080cecd0a8841104a5906355e upstream.

For some exception types the instruction address points behind the
instruction that caused the exception. Take that into account and add
the missing exception table entry.

Cc: <stable@vger.kernel.org>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf auxtrace: Fix address filter symbol name match for modules

commit cba04f3136b658583adb191556f99d087589c1cc upstream.

For modules, names from kallsyms__parse() contain the module name which
meant that module symbols did not match exactly by name.

Fix by matching the name string up to the separating tab character.

Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026072736.2982-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: fix use-after-free in __kernfs_remove

commit 4abc99652812a2ddf932f137515d5c5a04723538 upstream.

Syzkaller managed to trigger concurrent calls to
kernfs_remove_by_name_ns() for the same file resulting in
a KASAN detected use-after-free. The race occurs when the root
node is freed during kernfs_drain().

To prevent this acquire an additional reference for the root
of the tree that is removed before calling __kernfs_remove().

Found by syzkaller with the following reproducer (slab_nomerge is
required):

syz_mount_image$ext4(0x0, &(0x7f0000000100)='./file0\x00', 0x100000, 0x0, 0x0, 0x0, 0x0)
r0 = openat(0xffffffffffffff9c, &(0x7f0000000080)='/proc/self/exe\x00', 0x0, 0x0)
close(r0)
pipe2(&(0x7f0000000140)={0xffffffffffffffff, <r1=>0xffffffffffffffff}, 0x800)
mount$9p_fd(0x0, &(0x7f0000000040)='./file0\x00', &(0x7f00000000c0), 0x408, &(0x7f0000000280)={'trans=fd,', {'rfdno', 0x3d, r0}, 0x2c, {'wfdno', 0x3d, r1}, 0x2c, {[{@cache_loose}, {@mmap}, {@loose}, {@loose}, {@mmap}], [{@mask={'mask', 0x3d, '^MAY_EXEC'}}, {@fsmagic={'fsmagic', 0x3d, 0x10001}}, {@dont_hash}]}})

Sample report:

==================================================================
BUG: KASAN: use-after-free in kernfs_type include/linux/kernfs.h:335 [inline]
BUG: KASAN: use-after-free in kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline]
BUG: KASAN: use-after-free in __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369
Read of size 2 at addr ffff8880088807f0 by task syz-executor.2/857

CPU: 0 PID: 857 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x6e/0x91 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:317 [inline]
 print_report.cold+0x5e/0x5e5 mm/kasan/report.c:433
 kasan_report+0xa3/0x130 mm/kasan/report.c:495
 kernfs_type include/linux/kernfs.h:335 [inline]
 kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline]
 __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369
 __kernfs_remove fs/kernfs/dir.c:1356 [inline]
 kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589
 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943
 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899
 create_cache mm/slab_common.c:229 [inline]
 kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335
 p9_client_create+0xd4d/0x1190 net/9p/client.c:993
 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408
 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126
 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610
 vfs_get_tree+0x85/0x2e0 fs/super.c:1530
 do_new_mount fs/namespace.c:3040 [inline]
 path_mount+0x675/0x1d00 fs/namespace.c:3370
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]
 __se_sys_mount fs/namespace.c:3568 [inline]
 __x64_sys_mount+0x282/0x300 fs/namespace.c:3568
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f725f983aed
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f725f0f7028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f725faa3f80 RCX: 00007f725f983aed
RDX: 00000000200000c0 RSI: 0000000020000040 RDI: 0000000000000000
RBP: 00007f725f9f419c R08: 0000000020000280 R09: 0000000000000000
R10: 0000000000000408 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000006 R14: 00007f725faa3f80 R15: 00007f725f0d7000
 </TASK>

Allocated by task 855:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:45 [inline]
 set_alloc_info mm/kasan/common.c:437 [inline]
 __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:470
 kasan_slab_alloc include/linux/kasan.h:224 [inline]
 slab_post_alloc_hook mm/slab.h:727 [inline]
 slab_alloc_node mm/slub.c:3243 [inline]
 slab_alloc mm/slub.c:3251 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3258 [inline]
 kmem_cache_alloc+0xbf/0x200 mm/slub.c:3268
 kmem_cache_zalloc include/linux/slab.h:723 [inline]
 __kernfs_new_node+0xd4/0x680 fs/kernfs/dir.c:593
 kernfs_new_node fs/kernfs/dir.c:655 [inline]
 kernfs_create_dir_ns+0x9c/0x220 fs/kernfs/dir.c:1010
 sysfs_create_dir_ns+0x127/0x290 fs/sysfs/dir.c:59
 create_dir lib/kobject.c:63 [inline]
 kobject_add_internal+0x24a/0x8d0 lib/kobject.c:223
 kobject_add_varg lib/kobject.c:358 [inline]
 kobject_init_and_add+0x101/0x160 lib/kobject.c:441
 sysfs_slab_add+0x156/0x1e0 mm/slub.c:5954
 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899
 create_cache mm/slab_common.c:229 [inline]
 kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335
 p9_client_create+0xd4d/0x1190 net/9p/client.c:993
 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408
 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126
 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610
 vfs_get_tree+0x85/0x2e0 fs/super.c:1530
 do_new_mount fs/namespace.c:3040 [inline]
 path_mount+0x675/0x1d00 fs/namespace.c:3370
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]
 __se_sys_mount fs/namespace.c:3568 [inline]
 __x64_sys_mount+0x282/0x300 fs/namespace.c:3568
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 857:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:45
 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:367 [inline]
 ____kasan_slab_free mm/kasan/common.c:329 [inline]
 __kasan_slab_free+0x108/0x190 mm/kasan/common.c:375
 kasan_slab_free include/linux/kasan.h:200 [inline]
 slab_free_hook mm/slub.c:1754 [inline]
 slab_free_freelist_hook mm/slub.c:1780 [inline]
 slab_free mm/slub.c:3534 [inline]
 kmem_cache_free+0x9c/0x340 mm/slub.c:3551
 kernfs_put.part.0+0x2b2/0x520 fs/kernfs/dir.c:547
 kernfs_put+0x42/0x50 fs/kernfs/dir.c:521
 __kernfs_remove.part.0+0x72d/0x960 fs/kernfs/dir.c:1407
 __kernfs_remove fs/kernfs/dir.c:1356 [inline]
 kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589
 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943
 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899
 create_cache mm/slab_common.c:229 [inline]
 kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335
 p9_client_create+0xd4d/0x1190 net/9p/client.c:993
 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408
 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126
 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610
 vfs_get_tree+0x85/0x2e0 fs/super.c:1530
 do_new_mount fs/namespace.c:3040 [inline]
 path_mount+0x675/0x1d00 fs/namespace.c:3370
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]
 __se_sys_mount fs/namespace.c:3568 [inline]
 __x64_sys_mount+0x282/0x300 fs/namespace.c:3568
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The buggy address belongs to the object at ffff888008880780
 which belongs to the cache kernfs_node_cache of size 128
The buggy address is located 112 bytes inside of
 128-byte region [ffff888008880780, ffff888008880800)

The buggy address belongs to the physical page:
page:00000000732833f8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8880
flags: 0x100000000000200(slab|node=0|zone=1)
raw: 0100000000000200 0000000000000000 dead000000000122 ffff888001147280
raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888008880680: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
 ffff888008880700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888008880780: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                             ^
 ffff888008880800: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
 ffff888008880880: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
==================================================================

Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable <stable@kernel.org> # -rc3
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Link: https://lore.kernel.org/r/20220913121723.691454-1-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

counter: microchip-tcb-capture: Handle Signal1 read and Synapse

commit d917a62af81b133f35f627e7936e193c842a7947 upstream.

The signal_read(), action_read(), and action_write() callbacks have been
assuming Signal0 is requested without checking. This results in requests
for Signal1 returning data for Signal0. This patch fixes these
oversights by properly checking for the Signal's id in the respective
callbacks and handling accordingly based on the particular Signal
requested. The trig_inverted member of the mchp_tc_data is removed as
superfluous.

Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Cc: stable@vger.kernel.org
Reviewed-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Link: https://lore.kernel.org/r/20221018121014.7368-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Fix kernel panic when remove non-standard SDIO card

commit 9972e6b404884adae9eec7463e30d9b3c9a70b18 upstream.

SDIO tuple is only allocated for standard SDIO card, especially it causes
memory corruption issues when the non-standard SDIO card has removed, which
is because the card device's reference counter does not increase for it at
sdio_init_func(), but all SDIO card device reference counter gets decreased
at sdio_release_func().

Fixes: 6f51be3d37df ("sdio: allow non-standard SDIO cards")
Signed-off-by: Matthew Ma <mahongwei@zeku.com>
Reviewed-by: Weizhao Ouyang <ouyangweizhao@zeku.com>
Reviewed-by: John Wang <wangdayu@zeku.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221014034951.2300386-1-ouyangweizhao@zeku.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci_am654: 'select', not 'depends' REGMAP_MMIO

commit 8d280b1df87e0b3d1355aeac7e62b62214b93f1c upstream.

REGMAP_MMIO is not user-configurable, so we can only satisfy this
dependency by enabling some other Kconfig symbol that properly 'select's
it. Use select like everybody else.

Noticed when trying to enable this driver for compile testing.

Fixes: 59592cc1f593 ("mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221024180300.2292208-1-briannorris@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/dp: fix IRQ lifetime

commit a79343dcaba4b11adb57350e0b6426906a9b658e upstream.

Device-managed resources allocated post component bind must be tied to
the lifetime of the aggregate DRM device or they will not necessarily be
released when binding of the aggregate device is deferred.

This is specifically true for the DP IRQ, which will otherwise remain
requested so that the next bind attempt fails when requesting the IRQ a
second time.

Since commit c3bf8e21b38a ("drm/msm/dp: Add eDP support via aux_bus")
this can happen when the aux-bus panel driver has not yet been loaded so
that probe is deferred.

Fix this by tying the device-managed lifetime of the DP IRQ to the DRM
device so that it is released when bind fails.

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Cc: stable@vger.kernel.org # 5.10
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502679/
Link: https://lore.kernel.org/r/20220913085320.8577-6-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/hdmi: fix memory corruption with too many bridges

commit 4c1294da6aed1f16d47a417dcfe6602833c3c95c upstream.

Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.

Fixes: a3376e3ec81c ("drm/msm: convert to drm_bridge")
Cc: stable@vger.kernel.org # 3.12
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/502670/
Link: https://lore.kernel.org/r/20220913085320.8577-5-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/dsi: fix memory corruption with too many bridges

commit 2e786eb2f9cebb07e317226b60054df510b60c65 upstream.

Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.

Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Cc: stable@vger.kernel.org # 4.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/502668/
Link: https://lore.kernel.org/r/20220913085320.8577-4-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Use transport-defined speed mask for supported_speeds

commit 0b863257c17c5f57a41e0a48de140ed026957a63 upstream.

One of the sysfs values reported for supported_speeds was not valid (20Gb/s
reported instead of 64Gb/s).  Instead of driver internal speed mask
definition, use speed mask defined in transport_fc for reporting
host->supported_speeds.

Link: https://lore.kernel.org/r/20220927115946.17559-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac802154: Fix LQI recording

commit 5a5c4e06fd03b595542d5590f2bc05a6b7fc5c2b upstream.

Back in 2014, the LQI was saved in the skb control buffer (skb->cb, or
mac_cb(skb)) without any actual reset of this area prior to its use.

As part of a useful rework of the use of this region, 32edc40ae65c
("ieee802154: change _cb handling slightly") introduced mac_cb_init() to
basically memset the cb field to 0. In particular, this new function got
called at the beginning of mac802154_parse_frame_start(), right before
the location where the buffer got actually filled.

What went through unnoticed however, is the fact that the very first
helper called by device drivers in the receive path already used this
area to save the LQI value for later extraction. Resetting the cb field
"so late" led to systematically zeroing the LQI.

If we consider the reset of the cb field needed, we can make it as soon
as we get an skb from a device driver, right before storing the LQI,
as is the very first time we need to write something there.

Cc: stable@vger.kernel.org
Fixes: 32edc40ae65c ("ieee802154: change _cb handling slightly")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221020142535.1038885-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exec: Copy oldsighand->action under spin-lock

commit 5bf2fedca8f59379025b0d52f917b9ddb9bfe17e upstream.

unshare_sighand should only access oldsighand->action
while holding oldsighand->siglock, to make sure that
newsighand->action is in a consistent state.

Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/AM8PR10MB470871DEBD1DED081F9CC391E4389@AM8PR10MB4708.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/binfmt_elf: Fix memory leak in load_elf_binary()

commit 594d2a14f2168c09b13b114c3d457aa939403e52 upstream.

There is a memory leak reported by kmemleak:

  unreferenced object 0xffff88817104ef80 (size 224):
    comm "xfs_admin", pid 47165, jiffies 4298708825 (age 1333.476s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      60 a8 b3 00 81 88 ff ff a8 10 5a 00 81 88 ff ff  `.........Z.....
    backtrace:
      [<ffffffff819171e1>] __alloc_file+0x21/0x250
      [<ffffffff81918061>] alloc_empty_file+0x41/0xf0
      [<ffffffff81948cda>] path_openat+0xea/0x3d30
      [<ffffffff8194ec89>] do_filp_open+0x1b9/0x290
      [<ffffffff8192660e>] do_open_execat+0xce/0x5b0
      [<ffffffff81926b17>] open_exec+0x27/0x50
      [<ffffffff81a69250>] load_elf_binary+0x510/0x3ed0
      [<ffffffff81927759>] bprm_execve+0x599/0x1240
      [<ffffffff8192a997>] do_execveat_common.isra.0+0x4c7/0x680
      [<ffffffff8192b078>] __x64_sys_execve+0x88/0xb0
      [<ffffffff83bbf0a5>] do_syscall_64+0x35/0x80

If "interp_elf_ex" fails to allocate memory in load_elf_binary(),
the program will take the "out_free_ph" error handing path,
resulting in "interpreter" file resource is not released.

Fix it by adding an error handing path "out_free_file", which will
release the file resource when "interp_elf_ex" failed to allocate
memory.

Fixes: 0693ffebcfe5 ("fs/binfmt_elf.c: allocate less for static executable")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221024154421.982230-1-lizetao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: smscufx: Fix several use-after-free bugs

commit cc67482c9e5f2c80d62f623bcc347c29f9f648e1 upstream.

Several types of UAFs can occur when physically removing a USB device.

Adds ufx_ops_destroy() function to .fb_destroy of fb_ops, and
in this function, there is kref_put() that finally calls ufx_free().

This fix prevents multiple UAFs.

Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/linux-fbdev/20221011153436.GA4446@ubuntu/
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: temperature: ltc2983: allocate iio channels once

commit 4132f19173211856d35180958d2754f5c56d520a upstream.

Currently, every time the device wakes up from sleep, the
iio_chan array is reallocated, leaking the previous one
until the device is removed (basically never).

Move the allocation to the probe function to avoid this.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Fixes: f110f3188e563 ("iio: temperature: Add support for LTC2983")
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221014123724.1401011-2-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: light: tsl2583: Fix module unloading

commit 0dec4d2f2636b9e54d9d29f17afc7687c5407f78 upstream.

tsl2583 probe() uses devm_iio_device_register() and calling
iio_device_unregister() causes the unregister to occur twice. s
Switch to iio_device_register() instead of devm_iio_device_register()
in probe to avoid the device managed cleanup.

Fixes: 371894f5d1a0 ("iio: tsl2583: add runtime power management support")
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Link: https://lore.kernel.org/r/20220826122352.288438-1-shreeya.patel@collabora.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: iio: iio_utils: fix digit calculation

commit 72b2aa38191bcba28389b0e20bf6b4f15017ff2b upstream.

The iio_utils uses a digit calculation in order to know length of the
file name containing a buffer number. The digit calculation does not
work for number 0.

This leads to allocation of one character too small buffer for the
file-name when file name contains value '0'. (Eg. buffer0).

Fix digit calculation by returning one digit to be present for number
'0'.

Fixes: 096f9b862e60 ("tools:iio:iio_utils: implement digit calculation")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/Y0f+tKCz+ZAIoroQ@dc75zzyyyyyyyyyyyyycy-3.rev.dnainternet.fi
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Remove device endpoints from bandwidth list when freeing the device

commit 5aed5b7c2430ce318a8e62f752f181e66f0d1053 upstream.

Endpoints are normally deleted from the bandwidth list when they are
dropped, before the virt device is freed.

If xHC host is dying or being removed then the endpoints aren't dropped
cleanly due to functions returning early to avoid interacting with a
non-accessible host controller.

So check and delete endpoints that are still on the bandwidth list when
freeing the virt device.

Solves a list_del corruption kernel crash when unbinding xhci-pci,
caused by xhci_mem_cleanup() when it later tried to delete already freed
endpoints from the bandwidth list.

This only affects hosts that use software bandwidth checking, which
currenty is only the xHC in intel Panther Point PCH (Ivy Bridge)

Cc: stable@vger.kernel.org
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Add quirk to reset host back to default state at shutdown

commit 34cd2db408d591bc15771cbcc90939ade0a99a21 upstream.

Systems based on Alder Lake P see significant boot time delay if
boot firmware tries to control usb ports in unexpected link states.

This is seen with self-powered usb devices that survive in U3 link
suspended state over S5.

A more generic solution to power off ports at shutdown was attempted in
commit 83810f84ecf1 ("xhci: turn off port power in shutdown")
but it caused regression.

Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and
ports back to default state in shutdown.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: marvell: Use correct logic for nand-keep-config

commit ce107713b722af57c4b7f2477594d445b496420e upstream.

Originally the absence of the marvell,nand-keep-config property caused
the setup_data_interface function to be provided. However when
setup_data_interface was moved into nand_controller_ops the logic was
unintentionally inverted. Update the logic so that only if the
marvell,nand-keep-config property is present the bootloader NAND config
kept.

Cc: stable@vger.kernel.org
Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops")
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220927024728.28447-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller

commit 4f547472380136718b56064ea5689a61e135f904 upstream.

This appears to fix the error:
"xhci_hcd <address>; ERROR Transfer event TRB DMA ptr not part of
current TD ep_index 2 comp_code 13" that appear spuriously (or pretty
often) when using a r8152 USB3 ethernet adapter with integrated hub.

ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0

Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3

Cc: stable@vger.kernel.org
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: bdc: change state when port disconnected

commit fb8f60dd1b67520e0e0d7978ef17d015690acfc1 upstream.

When port is connected and then disconnected, the state stays as
configured. Which is incorrect as the port is no longer configured,
but in a not attached state.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/1664997235-18198-1-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Don't set IMI for no_interrupt

commit 308c316d16cbad99bb834767382baa693ac42169 upstream.

The gadget driver may have a certain expectation of how the request
completion flow should be from to its configuration. Make sure the
controller driver respect that. That is, don't set IMI (Interrupt on
Missed Isoc) when usb_request->no_interrupt is set. Also, the driver
should only set IMI to the last TRB of a chain.

Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Jeff Vanhoof <jdv1029@gmail.com>
Tested-by: Jeff Vanhoof <jdv1029@gmail.com>
Link: https://lore.kernel.org/r/ced336c84434571340c07994e3667a0ee284fefe.1666735451.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Stop processing more requests on IMI

commit f78961f8380b940e0cfc7e549336c21a2ad44f4d upstream.

When servicing a transfer completion event, the dwc3 driver will reclaim
TRBs of started requests up to the request associated with the interrupt
event. Currently we don't check for interrupt due to missed isoc, and
the driver may attempt to reclaim TRBs beyond the associated event. This
causes invalid memory access when the hardware still owns the TRB. If
there's a missed isoc TRB with IMI (interrupt on missed isoc), make sure
to stop servicing further.

Note that only the last TRB of chained TRBs has its status updated with
missed isoc.

Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable@vger.kernel.org
Reported-by: Jeff Vanhoof <jdv1029@gmail.com>
Reported-by: Dan Vacura <w36195@motorola.com>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Jeff Vanhoof <jdv1029@gmail.com>
Tested-by: Jeff Vanhoof <jdv1029@gmail.com>
Link: https://lore.kernel.org/r/b29acbeab531b666095dfdafd8cb5c7654fbb3e1.1666735451.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: add RESET_RESUME quirk for NVIDIA Jetson devices in RCM

commit fc4ade55c617dc73c7e9756b57f3230b4ff24540 upstream.

NVIDIA Jetson devices in Force Recovery mode (RCM) do not support
suspending, ie. flashing fails if the device has been suspended. The
devices are still visible in lsusb and seem to work otherwise, making
the issue hard to debug. This has been discovered in various forum
posts, eg. [1].

The patch has been tested on NVIDIA Jetson AGX Xavier, but I'm adding
all the Jetson models listed in [2] on the assumption that they all
behave similarly.

[1]: https://forums.developer.nvidia.com/t/flashing-not-working/72365
[2]: https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3271/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/quick_start.html

Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Cc: stable <stable@kernel.org> # after 6.1-rc3
Link: https://lore.kernel.org/r/20220919171610.30484-1-hannu@hrtk.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: rme9652: use explicitly signed char

commit 50895a55bcfde8ac6f22a37c6bc8cff506b3c7c6 upstream.

With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:

sound/pci/rme9652/hdsp.c:3953 hdsp_channel_buffer_location() warn: 'hdsp->channel_map[channel]' is unsigned
sound/pci/rme9652/hdsp.c:4153 snd_hdsp_channel_info() warn: impossible condition '(hdsp->channel_map[channel] < 0) => (0-255 < 0)'
sound/pci/rme9652/rme9652.c:1833 rme9652_channel_buffer_location() warn: 'rme9652->channel_map[channel]' is unsigned

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221025000313.546261-1-Jason@zx2c4.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: au88x0: use explicitly signed char

commit ee03c0f200eb0d9f22dd8732d9fb7956d91019c2 upstream.

With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:

sound/pci/au88x0/au88x0_core.c:2029 vortex_adb_checkinout() warn: signedness bug returning '(-22)'
sound/pci/au88x0/au88x0_core.c:2046 vortex_adb_checkinout() warn: signedness bug returning '(-12)'
sound/pci/au88x0/au88x0_core.c:2125 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, (0), en, 0)' is unsigned
sound/pci/au88x0/au88x0_core.c:2170 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, stream->resources, en, 4)' is unsigned

As well, since one function returns errnos, return an `int` rather than
a `signed char`.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221024162929.536004-1-Jason@zx2c4.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: Use del_timer_sync() before freeing timer

commit f0a868788fcbf63cdab51f5adcf73b271ede8164 upstream.

The current code for freeing the emux timer is extremely dangerous:

  CPU0 CPU1
  ---- ----
snd_emux_timer_callback()
    snd_emux_free()
      spin_lock(&emu->voice_lock)
      del_timer(&emu->tlist); <-- returns immediately
      spin_unlock(&emu->voice_lock);
      [..]
      kfree(emu);

  spin_lock(&emu->voice_lock);

 [BOOM!]

Instead just use del_timer_sync() which will wait for the timer to finish
before continuing. No need to check if the timer is active or not when
doing so.

This doesn't fix the race of a possible re-arming of the timer, but at
least it won't use the data that has just been freed.

[ Fixed unused variable warning by tiwai ]

Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221026231236.6834b551@gandalf.local.home
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: Fix possible completions during init_completion

commit 2871edb32f4622c3a25ce4b3977bad9050b91974 upstream.

kvaser_usb uses completions to signal when a response event is received
for outgoing commands.

However, it uses init_completion() to reinitialize the start_comp and
stop_comp completions before sending the start/stop commands.

In case the device sends the corresponding response just before the
actual command is sent, complete() may be called concurrently with
init_completion() which is not safe.

This might be triggerable even with a properly functioning device by
stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which
also causes the driver to send CMD_STOP_CHIP when restart-ms is off),
but that was not tested.

Fix the issue by using reinit_completion() instead.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb()

commit c3c06c61890da80494bb196f75d89b791adda87f upstream.

It is not allowed to call kfree_skb() from hardware interrupt context
or with interrupts being disabled. The skb is unlinked from the queue,
so it can be freed after spin_unlock_irqrestore().

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20221027091237.2290111-1-yangyingliang@huawei.com
Cc: stable@vger.kernel.org
[mkl: adjust subject]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.152

Link: https://lore.kernel.org/r/20221027165054.270676357@linuxfoundation.org
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20221028120232.344548477@linuxfoundation.org
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp: Update reuse->has_conns under reuseport_lock.

commit 69421bf98482d089e50799f45e48b25ce4a8d154 upstream.

When we call connect() for a UDP socket in a reuseport group, we have
to update sk->sk_reuseport_cb->has_conns to 1.  Otherwise, the kernel
could select a unconnected socket wrongly for packets sent to the
connected socket.

However, the current way to set has_conns is illegal and possible to
trigger that problem.  reuseport_has_conns() changes has_conns under
rcu_read_lock(), which upgrades the RCU reader to the updater.  Then,
it must do the update under the updater's lock, reuseport_lock, but
it doesn't for now.

For this reason, there is a race below where we fail to set has_conns
resulting in the wrong socket selection.  To avoid the race, let's split
the reader and updater with proper locking.

 cpu1                               cpu2
+----+                             +----+

__ip[46]_datagram_connect()        reuseport_grow()
.                                  .
|- reuseport_has_conns(sk, true)   |- more_reuse = __reuseport_alloc(more_socks_size)
|  .                               |
|  |- rcu_read_lock()
|  |- reuse = rcu_dereference(sk->sk_reuseport_cb)
|  |
|  |                               |  /* reuse->has_conns == 0 here */
|  |                               |- more_reuse->has_conns = reuse->has_conns
|  |- reuse->has_conns = 1         |  /* more_reuse->has_conns SHOULD BE 1 HERE */
|  |                               |
|  |                               |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb,
|  |                               |                     more_reuse)
|  `- rcu_read_unlock()            `- kfree_rcu(reuse, rcu)
|
|- sk->sk_state = TCP_ESTABLISHED

Note the likely(reuse) in reuseport_has_conns_set() is always true,
but we put the test there for ease of review.  [0]

For the record, usually, sk_reuseport_cb is changed under lock_sock().
The only exception is reuseport_grow() & TCP reqsk migration case.

  1) shutdown() TCP listener, which is moved into the latter part of
     reuse->socks[] to migrate reqsk.

  2) New listen() overflows reuse->socks[] and call reuseport_grow().

  3) reuse->max_socks overflows u16 with the new listener.

  4) reuseport_grow() pops the old shutdown()ed listener from the array
     and update its sk->sk_reuseport_cb as NULL without lock_sock().

shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(),
but, reuseport_has_conns_set() is called only for UDP under lock_sock(),
so likely(reuse) never be false in reuseport_has_conns_set().

[0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/

Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: /proc/pid/smaps_rollup: fix no vma's null-deref

Commit 258f669e7e88 ("mm: /proc/pid/smaps_rollup: convert to single value
seq_file") introduced a null-deref if there are no vma's in the task in
show_smaps_rollup.

Fixes: 258f669e7e88 ("mm: /proc/pid/smaps_rollup: convert to single value seq_file")
Signed-off-by: Seth Jenkins <sethjenkins@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()

commit 285febabac4a16655372d23ff43e89ff6f216691 upstream.

commit 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is
initialized") moves wbt_set_write_cache() before rq_qos_add(), which
is wrong because wbt_rq_qos() is still NULL.

Fix the problem by removing wbt_set_write_cache() and setting 'rwb->wc'
directly. Noted that this patch also remove the redundant setting of
'rab->wc'.

Fixes: 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is initialized")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081045.77ddf59b-yujie.liu@intel.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221009101038.1692875-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Add SD card quirk for broken discard

commit 07d2872bf4c864eb83d034263c155746a2fb7a3b upstream.

Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports
discard, while they actually don't. This might cause mk2fs to fail while
trying to format the card and revert it to a read-only mode.

To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD)
to indicate that we shall fall-back to use the legacy erase command
instead.

Signed-off-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com
[Ulf: Updated the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Makefile.debug: re-enable debug info for .S files

This is _not_ an upstream commit and just for 5.10.y only. It is based
on commit 32ef9e5054ec0321b9336058c58ec749e9c6b0fe upstream.

Alexey reported that the fraction of unknown filename instances in
kallsyms grew from ~0.3% to ~10% recently; Bill and Greg tracked it down
to assembler defined symbols, which regressed as a result of:

commit b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1")

In that commit, I allude to restoring debug info for assembler defined
symbols in a follow up patch, but it seems I forgot to do so in

commit a66049e2cf0e ("Kbuild: make DWARF version a choice")

Fixes: b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1")
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB

commit 33806e7cb8d50379f55c3e8f335e91e1b359dc7b upstream.

A recent change in LLVM made CONFIG_EFI_STUB unselectable because it no
longer pretends to support -mabi=ms, breaking the dependency in
Kconfig. Lack of CONFIG_EFI_STUB can prevent kernels from booting via
EFI in certain circumstances.

This check was added by

  8f24f8c2fc82 ("efi/libstub: Annotate firmware routines as __efiapi")

to ensure that __attribute__((ms_abi)) was available, as -mabi=ms is
not actually used in any cflags.

According to the GCC documentation, this attribute has been supported
since GCC 4.4.7. The kernel currently requires GCC 5.1 so this check is
not necessary; even when that change landed in 5.6, the kernel required
GCC 4.9 so it was unnecessary then as well.

Clang supports __attribute__((ms_abi)) for all versions that are
supported for building the kernel so no additional check is needed.
Remove the 'depends on' line altogether to allow CONFIG_EFI_STUB to be
selected when CONFIG_EFI is enabled, regardless of compiler.

Fixes: 8f24f8c2fc82 ("efi/libstub: Annotate firmware routines as __efiapi")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/d1ad006a8f64bdc17f618deffa9e7c91d82c444d
[nathan: Fix conflict due to lack of c6dbd3e5e69c in older trees]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: video: Force backlight native for more TongFang devices

commit 3dbc80a3e4c55c4a5b89ef207bed7b7de36157b4 upstream.

This commit is very different from the upstream commit! It fixes the same
issue by adding more quirks, rather then the general fix from the 6.1
kernel, because the general fix from the 6.1 kernel is part of a larger
refactoring of the backlight code which is not suitable for the stable
series.

As described in "ACPI: video: Drop NL5x?U, PF4NU1F and PF5?U??
acpi_backlight=native quirks" (10212754a0d2) the upstream commit "ACPI:
video: Make backlight class device registration a separate step (v2)"
(3dbc80a3e4c5) makes these quirks unnecessary. However as mentioned in this
bugtracker ticket https://bugzilla.kernel.org/show_bug.cgi?id=215683#c17
the upstream fix is part of a larger patchset that is overall too complex
for stable.

The TongFang GKxNRxx, GMxNGxx, GMxZGxx, and GMxRGxx / TUXEDO
Stellaris/Polaris Gen 1-4, have the same problem as the Clevo NL5xRU and
NL5xNU / TUXEDO Aura 15 Gen1 and Gen2:
They have a working native and video interface for screen backlight.
However the default detection mechanism first registers the video interface
before unregistering it again and switching to the native interface during
boot. This results in a dangling SBIOS request for backlight change for
some reason, causing the backlight to switch to ~2% once per boot on the
first power cord connect or disconnect event. Setting the native interface
explicitly circumvents this buggy behaviour by avoiding the unregistering
process.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Fix race between VF offering and VF association message from host

commit 365e1ececb2905f94cc10a5817c5b644a32a3ae2 upstream.

During vm boot, there might be possibility that vf registration
call comes before the vf association from host to vm.

And this might break netvsc vf path, To prevent the same block
vf registration until vf bind message comes from host.

Cc: stable@vger.kernel.org
Fixes: 00d7ddba11436 ("hv_netvsc: pair VF based on serial number")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/pt: Relax address filter validation

commit c243cecb58e3905baeace8827201c14df8481e2a upstream.

The requirement for 64-bit address filters is that they are canonical
addresses. In other respects any address range is allowed which would
include user space addresses.

That can be useful for tracing virtual machine guests because address
filtering can be used to advantage in place of current privilege level
(CPL) filtering.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220131072453.2839535-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: topology: fix default topology reporting

commit fbd92809997a391f28075f1c8b5ee314c225557c upstream.

RISC-V has no sane defaults to fall back on where there is no cpu-map
in the devicetree.
Without sane defaults, the package, core and thread IDs are all set to
-1. This causes user-visible inaccuracies for tools like hwloc/lstopo
which rely on the sysfs cpu topology files to detect a system's
topology.

On a PolarFire SoC, which should have 4 harts with a thread each,
lstopo currently reports:

Machine (793MB total)
  Package L#0
    NUMANode L#0 (P#0 793MB)
    Core L#0
      L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0)
      L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1)
      L1d L#2 (32KB) + L1i L#2 (32KB) + PU L#2 (P#2)
      L1d L#3 (32KB) + L1i L#3 (32KB) + PU L#3 (P#3)

Adding calls to store_cpu_topology() in {boot,smp} hart bringup code
results in the correct topolgy being reported:

Machine (793MB total)
  Package L#0
    NUMANode L#0 (P#0 793MB)
    L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
    L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)
    L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2)
    L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)

CC: stable@vger.kernel.org # 456797da792f: arm64: topology: move store_cpu_topology() to shared code
Fixes: 03f11f03dbfe ("RISC-V: Parse cpu topology during boot.")
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: topology: move store_cpu_topology() to shared code

commit 456797da792fa7cbf6698febf275fe9b36691f78 upstream.

arm64's method of defining a default cpu topology requires only minimal
changes to apply to RISC-V also. The current arm64 implementation exits
early in a uniprocessor configuration by reading MPIDR & claiming that
uniprocessor can rely on the default values.

This is appears to be a hangover from prior to '3102bc0e6ac7 ("arm64:
topology: Stop using MPIDR for topology information")', because the
current code just assigns default values for multiprocessor systems.

With the MPIDR references removed, store_cpu_topolgy() can be moved to
the common arch_topology code.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sc7180-trogdor: Fixup modem memory region

commit ef9a5d188d663753e73a3c8e8910ceab8e9305c4 upstream.

The modem firmware memory requirements vary between 32M/140M on
no-lte/lte skus respectively, so fixup the modem memory region
to reflect the requirements.

Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/1602786476-27833-1-git-send-email-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fcntl: fix potential deadlocks for &fown_struct.lock

[ Upstream commit f671a691e299f58835d4660d642582bf0e8f6fda ]

Syzbot reports a potential deadlock in do_fcntl:

========================================================
WARNING: possible irq lock inversion dependency detected
5.12.0-syzkaller #0 Not tainted
--------------------------------------------------------
syz-executor132/8391 just changed the state of lock:
ffff888015967bf8 (&f->f_owner.lock){.+..}-{2:2}, at: f_getown_ex fs/fcntl.c:211 [inline]
ffff888015967bf8 (&f->f_owner.lock){.+..}-{2:2}, at: do_fcntl+0x8b4/0x1200 fs/fcntl.c:395
but this lock was taken by another, HARDIRQ-safe lock in the past:
 (&dev->event_lock){-...}-{2:2}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
Chain exists of:
  &dev->event_lock --> &new->fa_lock --> &f->f_owner.lock

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&f->f_owner.lock);
                               local_irq_disable();
                               lock(&dev->event_lock);
                               lock(&new->fa_lock);
  <Interrupt>
    lock(&dev->event_lock);

 *** DEADLOCK ***

This happens because there is a lock hierarchy of
&dev->event_lock --> &new->fa_lock --> &f->f_owner.lock
from the following call chain:

  input_inject_event():
    spin_lock_irqsave(&dev->event_lock,...);
    input_handle_event():
      input_pass_values():
        input_to_handler():
          evdev_events():
            evdev_pass_values():
              spin_lock(&client->buffer_lock);
              __pass_event():
                kill_fasync():
                  kill_fasync_rcu():
                    read_lock(&fa->fa_lock);
                    send_sigio():
                      read_lock_irqsave(&fown->lock,...);

However, since &dev->event_lock is HARDIRQ-safe, interrupts have to be
disabled while grabbing &f->f_owner.lock, otherwise we invert the lock
hierarchy.

Hence, we replace calls to read_lock/read_unlock on &f->f_owner.lock,
with read_lock_irq/read_unlock_irq.

Reported-and-tested-by: syzbot+e6d5398a02c516ce5e70@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fcntl: make F_GETOWN(EX) return 0 on dead owner task

[ Upstream commit cc4a3f885e8f2bc3c86a265972e94fef32d68f67 ]

Currently there is no way to differentiate the file with alive owner
from the file with dead owner but pid of the owner reused. That's why
CRIU can't actually know if it needs to restore file owner or not,
because if it restores owner but actual owner was dead, this can
introduce unexpected signals to the "false"-owner (which reused the
pid).

Let's change the api, so that F_GETOWN(EX) returns 0 in case actual
owner is dead already. This comports with the POSIX spec, which
states that a PID of 0 indicates that no signal will be sent.

Cc: Jeff Layton <jlayton@kernel.org>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: f671a691e299 ("fcntl: fix potential deadlocks for &fown_struct.lock")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: Skip and warn on unknown format 'configN' attrs

[ Upstream commit e552b7be12ed62357df84392efa525ecb01910fb ]

If the kernel exposes a new perf_event_attr field in a format attr, perf
will return an error stating the specified PMU can't be found. For
example, a format attr with 'config3:0-63' causes an error as config3 is
unknown to perf. This causes a compatibility issue between a newer
kernel with older perf tool.

Before this change with a kernel adding 'config3' I get:

  $ perf record -e arm_spe// -- true
  event syntax error: 'arm_spe//'
                       \___ Cannot find PMU `arm_spe'. Missing kernel support?
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list
  available events

After this change, I get:

  $ perf record -e arm_spe// -- true
  WARNING: 'arm_spe_0' format 'inv_event_filter' requires 'perf_event_attr::config3' which is not supported by this version of perf!
  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.091 MB perf.data ]

To support unknown configN formats, rework the YACC implementation to
pass any config[0-9]+ format to perf_pmu__new_format() to handle with a
warning.

Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220914-arm-perf-tool-spe1-2-v2-v4-1-83c098e6212e@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf pmu: Validate raw event with sysfs exported format bits

[ Upstream commit e40647762fb5881360874e08e03e972d58d63c42 ]

A raw PMU event (eventsel+umask) in the form of rNNN is supported
by perf but lacks of checking for the validity of raw encoding.

For example, bit 16 and bit 17 are not valid on KBL but perf doesn't
report warning when encoding with these bits.

Before:

  # ./perf stat -e cpu/r031234/ -a -- sleep 1

   Performance counter stats for 'system wide':

                   0      cpu/r031234/

         1.003798924 seconds time elapsed

It may silently measure the wrong event!

The kernel supported bits have been exported through
/sys/devices/<pmu>/format/. Perf collects the information to
'struct perf_pmu_format' and links it to 'pmu->format' list.

The 'struct perf_pmu_format' has a bitmap which records the
valid bits for this format. For example,

  root@kbl-ppc:/sys/devices/cpu/format# cat umask
  config:8-15

The valid bits (bit8-bit15) are recorded in bitmap of format 'umask'.

We collect total valid bits of all formats, save to a local variable
'masks' and reverse it. Now '~masks' represents total invalid bits.

bits = config & ~masks;

The set bits in 'bits' indicate the invalid bits used in config.
Finally we use bitmap_scnprintf to report the invalid bits.

Some architectures may not export supported bits through sysfs,
so if masks is 0, perf_pmu__warn_invalid_config directly returns.

After:

Single event without name:

  # ./perf stat -e cpu/r031234/ -a -- sleep 1
  WARNING: event 'N/A' not valid (bits 16-17 of config '31234' not supported by kernel)!

   Performance counter stats for 'system wide':

                   0      cpu/r031234/

         1.001597373 seconds time elapsed

Multiple events with names:

  # ./perf stat -e cpu/rf01234,name=aaa/,cpu/r031234,name=bbb/ -a -- sleep 1
  WARNING: event 'aaa' not valid (bits 20,22 of config 'f01234' not supported by kernel)!
  WARNING: event 'bbb' not valid (bits 16-17 of config '31234' not supported by kernel)!

   Performance counter stats for 'system wide':

                   0      aaa
                   0      bbb

         1.001573787 seconds time elapsed

Warnings are reported for invalid bits.

Co-developed-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210310051138.12154-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: e552b7be12ed ("perf: Skip and warn on unknown format 'configN' attrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: always honor the CONFIG_CMDLINE_FORCE when parsing dtb

[ Upstream commit 10f6913c548b32ecb73801a16b120e761c6957ea ]

When CONFIG_CMDLINE_FORCE is enabled, cmdline provided by
CONFIG_CMDLINE are always used. This allows CONFIG_CMDLINE to be
used regardless of the result of device tree scanning.

This especially fixes the case where a device tree without the
chosen node is supplied to the kernel. In such cases,
early_init_dt_scan would return true. But inside
early_init_dt_scan_chosen, the cmdline won't be updated as there
is no chosen node in the device tree. As a result, CONFIG_CMDLINE
is not copied into boot_command_line even if CONFIG_CMDLINE_FORCE
is enabled. This commit allows properly update boot_command_line
in this situation.

Fixes: 8fd6e05c7463 ("arch: riscv: support kernel command line forcing when no DTB passed")
Signed-off-by: Wenting Zhang <zephray@outlook.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/PSBPR04MB399135DFC54928AB958D0638B1829@PSBPR04MB3991.apcprd04.prod.outlook.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Add machine name to kernel boot log and stack dump output

[ Upstream commit 46ad48e8a28da7cc37a16c7e7fc632ecf906e4bf ]

Add the machine name to kernel boot-up log, and install
the machine name to stack dump for DT boot mode.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Stable-dep-of: 10f6913c548b ("riscv: always honor the CONFIG_CMDLINE_FORCE when parsing dtb")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-tegra: Use actual clock rate for SW tuning correction

[ Upstream commit b78870e7f41534cc719c295d1f8809aca93aeeab ]

Ensure tegra_host member "curr_clk_rate" holds the actual clock rate
instead of requested clock rate for proper use during tuning correction
algorithm. Actual clk rate may not be the same as the requested clk
frequency depending on the parent clock source set. Tuning correction
algorithm depends on certain parameters which are sensitive to current
clk rate. If the host clk is selected instead of the actual clock rate,
tuning correction algorithm may end up applying invalid correction,
which could result in errors

Fixes: ea8fc5953e8b ("mmc: tegra: update hw tuning process")
Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221006130622.22900-4-pshete@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/gntdev: Accommodate VMA splitting

[ Upstream commit 5c13a4a0291b30191eff9ead8d010e1ca43a4d0c ]

Prior to this commit, the gntdev driver code did not handle the
following scenario correctly with paravirtualized (PV) Xen domains:

* User process sets up a gntdev mapping composed of two grant mappings
  (i.e., two pages shared by another Xen domain).
* User process munmap()s one of the pages.
* User process munmap()s the remaining page.
* User process exits.

In the scenario above, the user process would cause the kernel to log
the following messages in dmesg for the first munmap(), and the second
munmap() call would result in similar log messages:

  BUG: Bad page map in process doublemap.test  pte:... pmd:...
  page:0000000057c97bff refcount:1 mapcount:-1 \
    mapping:0000000000000000 index:0x0 pfn:...
  ...
  page dumped because: bad pte
  ...
  file:gntdev fault:0x0 mmap:gntdev_mmap [xen_gntdev] readpage:0x0
  ...
  Call Trace:
   <TASK>
   dump_stack_lvl+0x46/0x5e
   print_bad_pte.cold+0x66/0xb6
   unmap_page_range+0x7e5/0xdc0
   unmap_vmas+0x78/0xf0
   unmap_region+0xa8/0x110
   __do_munmap+0x1ea/0x4e0
   __vm_munmap+0x75/0x120
   __x64_sys_munmap+0x28/0x40
   do_syscall_64+0x38/0x90
   entry_SYSCALL_64_after_hwframe+0x61/0xcb
   ...

For each munmap() call, the Xen hypervisor (if built with CONFIG_DEBUG)
would print out the following and trigger a general protection fault in
the affected Xen PV domain:

  (XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
  (XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...

As of this writing, gntdev_grant_map structure's vma field (referred to
as map->vma below) is mainly used for checking the start and end
addresses of mappings. However, with split VMAs, these may change, and
there could be more than one VMA associated with a gntdev mapping.
Hence, remove the use of map->vma and rely on map->pages_vm_start for
the original start address and on (map->count << PAGE_SHIFT) for the
original mapping size. Let the invalidate() and find_special_page()
hooks use these.

Also, given that there can be multiple VMAs associated with a gntdev
mapping, move the "mmu_interval_notifier_remove(&map->notifier)" call to
the end of gntdev_put_map, so that the MMU notifier is only removed
after the closing of the last remaining VMA.

Finally, use an atomic to prevent inadvertent gntdev mapping re-use,
instead of using the map->live_grants atomic counter and/or the map->vma
pointer (the latter of which is now removed). This prevents the
userspace from mmap()'ing (with MAP_FIXED) a gntdev mapping over the
same address range as a previously set up gntdev mapping. This scenario
can be summarized with the following call-trace, which was valid prior
to this commit:

  mmap
    gntdev_mmap
  mmap (repeat mmap with MAP_FIXED over the same address range)
    gntdev_invalidate
      unmap_grant_pages (sets 'being_removed' entries to true)
        gnttab_unmap_refs_async
    unmap_single_vma
    gntdev_mmap (maps the shared pages again)
  munmap
    gntdev_invalidate
      unmap_grant_pages
        (no-op because 'being_removed' entries are true)
    unmap_single_vma (For PV domains, Xen reports that a granted page
      is being unmapped and triggers a general protection fault in the
      affected domain, if Xen was built with CONFIG_DEBUG)

The fix for this last scenario could be worth its own commit, but we
opted for a single commit, because removing the gntdev_grant_map
structure's vma field requires guarding the entry to gntdev_mmap(), and
the live_grants atomic counter is not sufficient on its own to prevent
the mmap() over a pre-existing mapping.

Link: https://github.com/QubesOS/qubes-issues/issues/7631
Fixes: ab31523c2fca ("xen/gntdev: allow usermode to map granted pages")
Cc: stable@vger.kernel.org
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221002222006.2077-3-m.v.b@runbox.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen: assume XENFEAT_gnttab_map_avail_bits being set for pv guests

[ Upstream commit 30dcc56bba911db561c35d4131baf983a41023f8 ]

XENFEAT_gnttab_map_avail_bits is always set in Xen 4.0 and newer.
Remove coding assuming it might be zero.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210730071804.4302-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: 5c13a4a0291b ("xen/gntdev: Accommodate VMA splitting")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Do not free snapshot if tracer is on cmdline

[ Upstream commit a541a9559bb0a8ecc434de01d3e4826c32e8bb53 ]

The ftrace_boot_snapshot and alloc_snapshot cmdline options allocate the
snapshot buffer at boot up for use later. The ftrace_boot_snapshot in
particular requires the snapshot to be allocated because it will take a
snapshot at the end of boot up allowing to see the traces that happened
during boot so that it's not lost when user space takes over.

When a tracer is registered (started) there's a path that checks if it
requires the snapshot buffer or not, and if it does not and it was
allocated it will do a synchronization and free the snapshot buffer.

This is only required if the previous tracer was using it for "max
latency" snapshots, as it needs to make sure all max snapshots are
complete before freeing. But this is only needed if the previous tracer
was using the snapshot buffer for latency (like irqoff tracer and
friends). But it does not make sense to free it, if the previous tracer
was not using it, and the snapshot was allocated by the cmdline
parameters. This basically takes away the point of allocating it in the
first place!

Note, the allocated snapshot worked fine for just trace events, but fails
when a tracer is enabled on the cmdline.

Further investigation, this goes back even further and it does not require
a tracer on the cmdline to fail. Simply enable snapshots and then enable a
tracer, and it will remove the snapshot.

Link: https://lkml.kernel.org/r/20221005113757.041df7fe@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 45ad21ca5530 ("tracing: Have trace_array keep track if snapshot buffer is allocated")
Reported-by: Ross Zwisler <zwisler@kernel.org>
Tested-by: Ross Zwisler <zwisler@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>