From: Vladimir Oltean Date: Thu, 12 Dec 2024 14:08:34 +0000 (+0200) Subject: net: phylink: improve phylink_sfp_config_phy() error message with missing PHY driver X-Git-Tag: block-6.14-20240131~28^2~220 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=ffcbfb5f9779637792547356a4fb8b0cbf645fa9;p=linux-block.git net: phylink: improve phylink_sfp_config_phy() error message with missing PHY driver It seems that phylink does not support driving PHYs in SFP modules using the Generic PHY or Generic Clause 45 PHY driver. I've come to this conclusion after analyzing these facts: - sfp_sm_probe_phy(), who is our caller here, first calls phy_device_register() and then sfp_add_phy() -> ... -> phylink_sfp_connect_phy(). - phydev->supported is populated by phy_probe() - phy_probe() is usually called synchronously from phy_device_register() via phy_bus_match(), if a precise device driver is found for the PHY. In that case, phydev->supported has a good chance of being set to a non-zero mask. - There is an exceptional case for the PHYs for which phy_bus_match() didn't find a driver. Those devices sit for a while without a driver, then phy_attach_direct() force-binds the genphy_c45_driver or genphy_driver to them. Again, this triggers phy_probe() and renders a good chance of phydev->supported being populated, assuming compatibility with genphy_read_abilities() or genphy_c45_pma_read_abilities(). - phylink_sfp_config_phy() does not support the exceptional case of retrieving phydev->supported from the Generic PHY driver, due to its code flow. It expects the phydev->supported mask to already be non-empty, because it first calls phylink_validate() on it, and only calls phylink_attach_phy() if that succeeds. Thus, phylink_attach_phy() -> phy_attach_direct() has no chance of running. It is not my wish to change the state of affairs by altering the code flow, but merely to document the limitation rather than have the current unspecific error: [ 61.800079] mv88e6085 d0032004.mdio-mii:12 sfp: validation with support 00,00000000,00000000,00000000 failed: -EINVAL [ 61.820743] sfp sfp: sfp_add_phy failed: -EINVAL On the premise that an empty phydev->supported is going to make phylink_validate() fail anyway, and that this is caused by a missing PHY driver, it would be more informative to single out that case, undercut the entire phylink_sfp_config_phy() call, including phylink_validate(), and print a more specific message for this common gotcha: [ 37.076403] mv88e6085 d0032004.mdio-mii:12 sfp: PHY i2c:sfp:16 (id 0x01410cc2) has no driver loaded [ 37.089157] mv88e6085 d0032004.mdio-mii:12 sfp: Drivers which handle known common cases: CONFIG_BCM84881_PHY, CONFIG_MARVELL_PHY [ 37.108047] sfp sfp: sfp_add_phy failed: -EINVAL Link: https://lore.kernel.org/netdev/20241113144229.3ff4bgsalvj7spb7@skbuf/ Signed-off-by: Vladimir Oltean Reviewed-by: Russell King (Oracle) Link: https://patch.msgid.link/20241212140834.278894-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 95fbc363f9a6..6d50c2fdb190 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -3623,6 +3623,13 @@ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy) { struct phylink *pl = upstream; + if (!phy->drv) { + phylink_err(pl, "PHY %s (id 0x%.8lx) has no driver loaded\n", + phydev_name(phy), (unsigned long)phy->phy_id); + phylink_err(pl, "Drivers which handle known common cases: CONFIG_BCM84881_PHY, CONFIG_MARVELL_PHY\n"); + return -EINVAL; + } + /* * This is the new way of dealing with flow control for PHYs, * as described by Timur Tabi in commit 529ed1275263 ("net: phy: