From: Shawn Lin Date: Mon, 26 Mar 2018 09:26:25 +0000 (+0800) Subject: mmc: dw_mmc: update actual clock for mmc debugfs X-Git-Tag: for-linus-20180616~79^2~89 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=ff178981bd5fd1667f373098740cb1c6d6efa1ba;p=linux-2.6-block.git mmc: dw_mmc: update actual clock for mmc debugfs Respect the actual clock for mmc debugfs to help better debug the hardware. mmc_host mmc0: Bus speed (slot 0) = 135475200Hz (slot req 150000000Hz, actual 135475200HZ div = 0) cat /sys/kernel/debug/mmc0/ios clock: 150000000 Hz actual clock: 135475200 Hz vdd: 21 (3.3 ~ 3.4 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 3 (8 bits) timing spec: 9 (mmc HS200) signal voltage: 0 (1.80 V) driver type: 0 (driver type B) Cc: Xiao Yao Cc: Ziyuan Signed-off-by: Shawn Lin Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 29a1afa81f66..623f4d27fa01 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1230,6 +1230,8 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit) if (host->state == STATE_WAITING_CMD11_DONE) sdmmc_cmd_bits |= SDMMC_CMD_VOLT_SWITCH; + slot->mmc->actual_clock = 0; + if (!clock) { mci_writel(host, CLKENA, 0); mci_send_cmd(slot, sdmmc_cmd_bits, 0); @@ -1288,6 +1290,8 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit) /* keep the last clock value that was requested from core */ slot->__clk_old = clock; + slot->mmc->actual_clock = div ? ((host->bus_hz / div) >> 1) : + host->bus_hz; } host->current_speed = clock;