From: Brian Austin Date: Thu, 21 Jun 2012 08:36:02 +0000 (-0700) Subject: ARM: OMAP: beagle: Set USB Host Port 1 to OMAP_USBHS_PORT_MODE_UNUSED X-Git-Tag: v3.6-rc1~148^2~4^2~12 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=f6f6c9a5be996f266ff6fbe7850d76c3b0bdab95;p=linux-2.6-block.git ARM: OMAP: beagle: Set USB Host Port 1 to OMAP_USBHS_PORT_MODE_UNUSED The beagleboard USB Host Port that is used is Port 2. The platform driver sets MODE_PHY for port 1 causing pin muxing to override the pins on the expansion connector P17 when using board_mux[]. Since USBHS Port 1 is not connected remove the case for muxing the USB Port1 pins by default. Tested with BeagleBoard xM revC and checked the userguides for Beagle xM and revC to be sure USB Port2 is what is used. Signed-off-by: Brian Austin Acked-by: Russ Dill Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 79c6909eeb78..75eb88a738c4 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -435,7 +435,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,