From: Maxime Ripard <maxime.ripard@bootlin.com>
Date: Wed, 7 Nov 2018 10:14:15 +0000 (+0100)
Subject: ARM: dts: sun8i: a23/a33: Remove all useless pinctrl nodes
X-Git-Tag: for-linus-20190104~30^2~2^2~27
X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=ec6b944c5adbef09aac9b436fb07e91632f75e05;p=linux-block.git

ARM: dts: sun8i: a23/a33: Remove all useless pinctrl nodes

The gpio pinctrl nodes are redundant and as such useless most of the times.
Since they will also generate warnings in DTC, we can simply remove most of
them.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
---

diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
index 61a4702b63c1..4a318faa462a 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -54,8 +54,6 @@
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_pwrseq_pin_mid2407>;
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
 		post-power-on-delay-ms = <200>;
@@ -85,13 +83,6 @@
 	};
 };
 
-&r_pio {
-	wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
-		pins = "PL6";
-		function = "gpio_out";
-	};
-};
-
 &touchscreen {
 	reg = <0x40>;
 	compatible = "silead,gsl1680";
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
index 29a032164e3d..22e153d50523 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -54,8 +54,6 @@
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_pwrseq_pin_mid2809>;
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
 		post-power-on-delay-ms = <200>;
@@ -78,13 +76,6 @@
 	};
 };
 
-&r_pio {
-	wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
-		pins = "PL6";
-		function = "gpio_out";
-	};
-};
-
 &touchscreen {
 	reg = <0x40>;
 	compatible = "silead,gsl3670";
diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts
index 7322357aab04..2c4d892ea9f1 100644
--- a/arch/arm/boot/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts
@@ -63,8 +63,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_parrot>;
 
 		led1 {
 			label = "parrot:led1:usr";
@@ -138,7 +136,7 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;
+	pinctrl-0 = <&mmc1_pins_a>;
 	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -171,28 +169,11 @@
 		bias-pull-up;
 	};
 
-	led_pins_parrot: led_pins@0 {
-		pins = "PE16", "PE17";
-		function = "gpio_out";
-	};
-
 	usb0_id_det: usb0_id_detect_pin@0 {
 		pins = "PD10";
 		function = "gpio_in";
 		bias-pull-up;
 	};
-
-	usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
-		pins = "PD12";
-		function = "gpio_out";
-	};
-};
-
-&r_pio {
-	wifi_reset_pin_parrot: wifi_reset_pin@0 {
-		pins = "PL6";
-		function = "gpio_out";
-	};
 };
 
 &r_rsb {
@@ -318,8 +299,6 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_vbus_pin_parrot>;
 	gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index 5e8a95af89b8..c5f0f2e627bf 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -73,8 +73,6 @@
 		reg = <0x40>;
 		interrupt-parent = <&pio>;
 		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_power_pin>;
 		power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 		/* Tablet dts must provide reg and compatible */
 		status = "disabled";
@@ -97,11 +95,6 @@
 		bias-pull-up;
 	};
 
-	ts_power_pin: ts_power_pin@0 {
-		pins = "PH1";
-		function = "gpio_out";
-	};
-
 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
 		pins = "PH8";
 		function = "gpio_in";