From: Manish Narani Date: Fri, 22 Nov 2019 07:15:57 +0000 (+0530) Subject: dt-bindings: mmc: Correct the type of the clk phase properties X-Git-Tag: for-linus-20191205~86^2 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=def7bd940f8cceb41ec3d1383acd8ab937056dcb;p=linux-2.6-block.git dt-bindings: mmc: Correct the type of the clk phase properties The clock phase properties are having two uint32 values. The minItems and maxItems are set to 2 for the same. So the property type should be 'uint32-array' and not 'uint32'. Modify it to correct the same. Reported-by: Rob Herring Signed-off-by: Manish Narani Signed-off-by: Ulf Hansson --- diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 305b2016bc17..b130450c3b34 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -334,16 +334,17 @@ patternProperties: - reg "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$": + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 359 - description: - Set the clock (phase) delays which are to be configured in the - controller while switching to particular speed mode. These values - are in pair of degrees. + items: + minimum: 0 + maximum: 359 + description: + Set the clock (phase) delays which are to be configured in the + controller while switching to particular speed mode. These values + are in pair of degrees. dependencies: cd-debounce-delay-ms: [ cd-gpios ]