From: bayi cheng Date: Mon, 14 Nov 2022 08:13:27 +0000 (+0800) Subject: spi: spi-mtk-nor: Optimize timeout for dma read X-Git-Tag: io_uring-6.2-2022-12-19~32^2~29 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=d52a826b40604387d3e24b54e12e404867902fbb;p=linux-block.git spi: spi-mtk-nor: Optimize timeout for dma read The timeout value of the current dma read is unreasonable. For example, If the spi flash clock is 26Mhz, It will takes about 1.3ms to read a 4KB data in spi mode. But the actual measurement exceeds 50s when a dma read timeout is encountered. In order to be more accurately, It is necessary to use usecs_to_jiffies, After modification, the measured timeout value is about 130ms. Signed-off-by: bayi cheng Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20221114081327.25750-1-bayi.cheng@mediatek.com Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-mtk-nor.c b/drivers/spi/spi-mtk-nor.c index d167699a1a96..58eca18b28b0 100644 --- a/drivers/spi/spi-mtk-nor.c +++ b/drivers/spi/spi-mtk-nor.c @@ -354,7 +354,7 @@ static int mtk_nor_dma_exec(struct mtk_nor *sp, u32 from, unsigned int length, dma_addr_t dma_addr) { int ret = 0; - ulong delay; + u32 delay, timeout; u32 reg; writel(from, sp->base + MTK_NOR_REG_DMA_FADR); @@ -376,15 +376,16 @@ static int mtk_nor_dma_exec(struct mtk_nor *sp, u32 from, unsigned int length, mtk_nor_rmw(sp, MTK_NOR_REG_DMA_CTL, MTK_NOR_DMA_START, 0); delay = CLK_TO_US(sp, (length + 5) * BITS_PER_BYTE); + timeout = (delay + 1) * 100; if (sp->has_irq) { if (!wait_for_completion_timeout(&sp->op_done, - (delay + 1) * 100)) + usecs_to_jiffies(max(timeout, 10000U)))) ret = -ETIMEDOUT; } else { ret = readl_poll_timeout(sp->base + MTK_NOR_REG_DMA_CTL, reg, !(reg & MTK_NOR_DMA_START), delay / 3, - (delay + 1) * 100); + timeout); } if (ret < 0)