From: Jiawen Wu Date: Wed, 19 Jul 2023 09:22:33 +0000 (+0800) Subject: net: phy: marvell10g: fix 88x3310 power up X-Git-Tag: v6.5-rc4~36^2~34 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=c7b75bea853daeb64fc831dbf39a6bbabcc402ac;p=linux-2.6-block.git net: phy: marvell10g: fix 88x3310 power up Clear MV_V2_PORT_CTRL_PWRDOWN bit to set power up for 88x3310 PHY, it sometimes does not take effect immediately. And a read of this register causes the bit not to clear. This will cause mv3310_reset() to time out, which will fail the config initialization. So add a delay before the next access. Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe") Signed-off-by: Jiawen Wu Reviewed-by: Russell King (Oracle) Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 55d9d7acc32e..d4bb90d76881 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -328,6 +328,13 @@ static int mv3310_power_up(struct phy_device *phydev) ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL, MV_V2_PORT_CTRL_PWRDOWN); + /* Sometimes, the power down bit doesn't clear immediately, and + * a read of this register causes the bit not to clear. Delay + * 100us to allow the PHY to come out of power down mode before + * the next access. + */ + udelay(100); + if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310 || priv->firmware_ver < 0x00030000) return ret;