From: Alexandre Mergnat Date: Fri, 10 Jan 2025 13:31:16 +0000 (+0100) Subject: arm64: dts: mediatek: add display support for mt8365-evk X-Git-Tag: io_uring-6.15-20250403~81^2~31^2~27 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=b7b5052f6b13061db179cf2f0f16c3334e27239c;p=linux-block.git arm64: dts: mediatek: add display support for mt8365-evk MIPI DSI: - Add "vsys_lcm_reg" regulator support and setup the "mt6357_vsim1_reg", to power the pannel plugged to the DSI connector. - Setup the Display Parallel Interface. - Add the startek kd070fhfid015 pannel support. HDMI: - Add HDMI connector support. - Add the "ite,it66121" HDMI bridge support, driven by I2C1. - Setup the Display Parallel Interface. Fix a typo in the ethernet node. Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Alexandre Mergnat Link: https://lore.kernel.org/r/20231023-display-support-v7-6-6703f3e26831@baylibre.com Signed-off-by: AngeloGioacchino Del Regno --- diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts index 44c61094c4d5..1f8584bd66c3 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -28,6 +28,21 @@ stdout-path = "serial0:921600n8"; }; + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "d"; + + port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_connector_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_connector_out>; + }; + }; + }; + firmware { optee { compatible = "linaro,optee-tz"; @@ -105,6 +120,16 @@ pinctrl-5 = <&aud_mosi_on_pins>; mediatek,platform = <&afe>; }; + + vsys_lcm_reg: regulator-vsys-lcm { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&pio 129 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vsys_lcm"; + }; + }; &afe { @@ -132,13 +157,102 @@ sram-supply = <&mt6357_vsram_proc_reg>; }; +&dither0_out { + remote-endpoint = <&dsi0_in>; +}; + +&dpi0 { + pinctrl-0 = <&dpi_default_pins>; + pinctrl-1 = <&dpi_idle_pins>; + pinctrl-names = "default", "sleep"; + /* + * Ethernet and HDMI (DPI0) are sharing pins. + * Only one can be enabled at a time and require the physical switch + * SW2101 to be set on LAN position + */ + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dpi0_in: endpoint@1 { + reg = <1>; + remote-endpoint = <&rdma1_out>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + dpi0_out: endpoint@1 { + reg = <1>; + remote-endpoint = <&it66121_in>; + }; + }; + }; +}; + +&dsi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "startek,kd070fhfid015"; + reg = <0>; + enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&mt6357_vsim1_reg>; + power-supply = <&vsys_lcm_reg>; + + port { + #address-cells = <1>; + #size-cells = <0>; + panel_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi0_out>; + }; + }; + }; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsi0_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&dither0_out>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + dsi0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + ðernet { pinctrl-0 = <ðernet_pins>; pinctrl-names = "default"; phy-handle = <ð_phy>; phy-mode = "rmii"; /* - * Ethernet and HDMI (DSI0) are sharing pins. + * Ethernet and HDMI (DPI0) are sharing pins. * Only one can be enabled at a time and require the physical switch * SW2101 to be set on LAN position * mt6357_vibr_reg and mt6357_vsim2_reg are needed to supply ethernet @@ -162,6 +276,56 @@ status = "okay"; }; +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-div = <2>; + clock-frequency = <100000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + + it66121_hdmi: hdmi@4c { + compatible = "ite,it66121"; + reg = <0x4c>; + #sound-dai-cells = <0>; + interrupt-parent = <&pio>; + interrupts = <68 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&ite_pins>; + pinctrl-names = "default"; + reset-gpios = <&pio 69 GPIO_ACTIVE_LOW>; + vcn18-supply = <&mt6357_vsim2_reg>; + vcn33-supply = <&mt6357_vibr_reg>; + vrf12-supply = <&mt6357_vrf12_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + it66121_in: endpoint@0 { + reg = <0>; + bus-width = <12>; + remote-endpoint = <&dpi0_out>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + hdmi_connector_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; +}; + &mmc0 { assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>; assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; @@ -206,6 +370,11 @@ mediatek,micbias1-microvolt = <1700000>; }; +&mt6357_vsim1_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + &pio { aud_default_pins: audiodefault-pins { clk-dat-pins { @@ -268,6 +437,49 @@ }; }; + dpi_default_pins: dpi-default-pins { + pins { + pinmux = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + drive-strength = <4>; + }; + }; + + dpi_idle_pins: dpi-idle-pins { + pins { + pinmux = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + }; + ethernet_pins: ethernet-pins { phy_reset_pins { pinmux = ; @@ -309,6 +521,33 @@ }; }; + i2c1_pins: i2c1-pins { + pins { + pinmux = , + ; + bias-pull-up; + }; + }; + + ite_pins: ite-pins { + irq_ite_pins { + pinmux = ; + input-enable; + bias-pull-up; + }; + + pwr_pins { + pinmux = , + ; + output-high; + }; + + rst_ite_pins { + pinmux = ; + output-high; + }; + }; + mmc0_default_pins: mmc0-default-pins { clk-pins { pinmux = ; @@ -464,6 +703,10 @@ status = "okay"; }; +&rdma1_out { + remote-endpoint = <&dpi0_in>; +}; + &ssusb { dr_mode = "otg"; maximum-speed = "high-speed";