From: Masaru Nagai Date: Thu, 7 Mar 2019 10:24:47 +0000 (+0100) Subject: ravb: Decrease TxFIFO depth of Q3 and Q2 to one X-Git-Tag: v5.1-rc1~31^2~64 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=ae9819e339b451da7a86ab6fe38ecfcb6814e78a;p=linux-2.6-block.git ravb: Decrease TxFIFO depth of Q3 and Q2 to one Hardware has the CBS (Credit Based Shaper) which affects only Q3 and Q2. When updating the CBS settings, even if the driver does so after waiting for Tx DMA finished, there is a possibility that frame data still remains in TxFIFO. To avoid this, decrease TxFIFO depth of Q3 and Q2 to one. This patch has been exercised this using netperf TCP_MAERTS, TCP_STREAM and UDP_STREAM tests run on an Ebisu board. No performance change was detected, outside of noise in the tests, both in terms of throughput and CPU utilisation. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Masaru Nagai Signed-off-by: Kazuya Mizuguchi [simon: updated changelog] Signed-off-by: Simon Horman Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index d28c8f9ca55b..8154b38c08f7 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -458,7 +458,7 @@ static int ravb_dmac_init(struct net_device *ndev) RCR_EFFS | RCR_ENCF | RCR_ETS0 | RCR_ESF | 0x18000000, RCR); /* Set FIFO size */ - ravb_write(ndev, TGC_TQP_AVBMODE1 | 0x00222200, TGC); + ravb_write(ndev, TGC_TQP_AVBMODE1 | 0x00112200, TGC); /* Timestamp enable */ ravb_write(ndev, TCCR_TFEN, TCCR);