From: Chen-Yu Tsai Date: Wed, 30 Oct 2024 07:02:22 +0000 (+0800) Subject: arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add supplies for fixed regulators X-Git-Tag: v6.13-rc1~140^2~25^2~1 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=aaecb1da58a72bfbd2c35d4aadc43caa02f11862;p=linux-block.git arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add supplies for fixed regulators When the fixed regulators for the LCD panel and DP bridge were added, their supplies were not modeled in. These, except for the 1.0V supply, are just load switches, and need and have a supply. Add the supplies for each of the fixed regulators. Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board") Signed-off-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20241030070224.1006331-4-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno --- diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index ac7ec0676e14..49e053b932e7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -20,6 +20,7 @@ regulator-boot-on; gpio = <&pio 54 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp1800_alw>; }; pp1800_mipibrdg: pp1800-mipibrdg { @@ -32,6 +33,7 @@ regulator-boot-on; gpio = <&pio 36 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp1800_alw>; }; pp3300_panel: pp3300-panel { @@ -46,6 +48,7 @@ regulator-boot-on; gpio = <&pio 35 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300_alw>; }; pp3300_mipibrdg: pp3300-mipibrdg { @@ -58,6 +61,7 @@ regulator-boot-on; gpio = <&pio 37 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300_alw>; }; volume_buttons: volume-buttons {