From: Jiri Kosina Date: Sun, 22 Sep 2019 20:33:41 +0000 (+0200) Subject: Merge branch 'for-5.4/ish' into for-linus X-Git-Tag: for-linus-2019-09-27~26^2~4 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=979d859d3ff130ff212472d7fc67a474cdd96047;hp=98656d503dd62258bfa8aaf2cd702ad3491e0713;p=linux-2.6-block.git Merge branch 'for-5.4/ish' into for-linus - fixes for handling power management for intel-ish devices with NO_D3 flag set, from Zhang Lixu Signed-off-by: Jiri Kosina --- diff --git a/drivers/hid/intel-ish-hid/ipc/hw-ish.h b/drivers/hid/intel-ish-hid/ipc/hw-ish.h index 5792a104000a..6c1e6110867f 100644 --- a/drivers/hid/intel-ish-hid/ipc/hw-ish.h +++ b/drivers/hid/intel-ish-hid/ipc/hw-ish.h @@ -78,5 +78,6 @@ irqreturn_t ish_irq_handler(int irq, void *dev_id); struct ishtp_device *ish_dev_init(struct pci_dev *pdev); int ish_hw_start(struct ishtp_device *dev); void ish_device_disable(struct ishtp_device *dev); +int ish_disable_dma(struct ishtp_device *dev); #endif /* _ISHTP_HW_ISH_H_ */ diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c index 18fe8af89aad..8f8dfdf64833 100644 --- a/drivers/hid/intel-ish-hid/ipc/ipc.c +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c @@ -672,7 +672,7 @@ eoi: * * Return: 0 for success else error code. */ -static int ish_disable_dma(struct ishtp_device *dev) +int ish_disable_dma(struct ishtp_device *dev) { unsigned int dma_delay; diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 279567baca3d..784dcc8c7022 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #define CREATE_TRACE_POINTS @@ -98,6 +99,11 @@ static const struct pci_device_id ish_invalid_pci_ids[] = { {} }; +static inline bool ish_should_enter_d0i3(struct pci_dev *pdev) +{ + return !pm_suspend_via_firmware() || pdev->device == CHV_DEVICE_ID; +} + /** * ish_probe() - PCI driver probe callback * @pdev: pci device @@ -148,7 +154,6 @@ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* mapping IO device memory */ hw->mem_addr = pcim_iomap_table(pdev)[0]; ishtp->pdev = pdev; - pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; /* request and enable interrupt */ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); @@ -185,7 +190,6 @@ static void ish_remove(struct pci_dev *pdev) struct ishtp_device *ishtp_dev = pci_get_drvdata(pdev); ishtp_bus_remove_all_clients(ishtp_dev, false); - pdev->dev_flags &= ~PCI_DEV_FLAGS_NO_D3; ish_device_disable(ishtp_dev); } @@ -207,17 +211,13 @@ static void __maybe_unused ish_resume_handler(struct work_struct *work) { struct pci_dev *pdev = to_pci_dev(ish_resume_device); struct ishtp_device *dev = pci_get_drvdata(pdev); - uint32_t fwsts; int ret; - /* Get ISH FW status */ - fwsts = IPC_GET_ISH_FWSTS(dev->ops->get_fw_status(dev)); + /* Check the NO_D3 flag to distinguish the resume paths */ + if (pdev->dev_flags & PCI_DEV_FLAGS_NO_D3) { + pdev->dev_flags &= ~PCI_DEV_FLAGS_NO_D3; + disable_irq_wake(pdev->irq); - /* - * If currently, in ISH FW, sensor app is loaded or beyond that, - * it means ISH isn't powered off, in this case, send a resume message. - */ - if (fwsts >= FWSTS_SENSOR_APP_LOADED) { ishtp_send_resume(dev); /* Waiting to get resume response */ @@ -225,16 +225,20 @@ static void __maybe_unused ish_resume_handler(struct work_struct *work) ret = wait_event_interruptible_timeout(dev->resume_wait, !dev->resume_flag, msecs_to_jiffies(WAIT_FOR_RESUME_ACK_MS)); - } - /* - * If in ISH FW, sensor app isn't loaded yet, or no resume response. - * That means this platform is not S0ix compatible, or something is - * wrong with ISH FW. So on resume, full reboot of ISH processor will - * happen, so need to go through init sequence again. - */ - if (dev->resume_flag) + /* + * If the flag is not cleared, something is wrong with ISH FW. + * So on resume, need to go through init sequence again. + */ + if (dev->resume_flag) + ish_init(dev); + } else { + /* + * Resume from the D3, full reboot of ISH processor will happen, + * so need to go through init sequence again. + */ ish_init(dev); + } } /** @@ -250,23 +254,43 @@ static int __maybe_unused ish_suspend(struct device *device) struct pci_dev *pdev = to_pci_dev(device); struct ishtp_device *dev = pci_get_drvdata(pdev); - enable_irq_wake(pdev->irq); - /* - * If previous suspend hasn't been asnwered then ISH is likely dead, - * don't attempt nested notification - */ - if (dev->suspend_flag) - return 0; - - dev->resume_flag = 0; - dev->suspend_flag = 1; - ishtp_send_suspend(dev); - - /* 25 ms should be enough for live ISH to flush all IPC buf */ - if (dev->suspend_flag) - wait_event_interruptible_timeout(dev->suspend_wait, - !dev->suspend_flag, - msecs_to_jiffies(25)); + if (ish_should_enter_d0i3(pdev)) { + /* + * If previous suspend hasn't been asnwered then ISH is likely + * dead, don't attempt nested notification + */ + if (dev->suspend_flag) + return 0; + + dev->resume_flag = 0; + dev->suspend_flag = 1; + ishtp_send_suspend(dev); + + /* 25 ms should be enough for live ISH to flush all IPC buf */ + if (dev->suspend_flag) + wait_event_interruptible_timeout(dev->suspend_wait, + !dev->suspend_flag, + msecs_to_jiffies(25)); + + if (dev->suspend_flag) { + /* + * It looks like FW halt, clear the DMA bit, and put + * ISH into D3, and FW would reset on resume. + */ + ish_disable_dma(dev); + } else { + /* Set the NO_D3 flag, the ISH would enter D0i3 */ + pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; + + enable_irq_wake(pdev->irq); + } + } else { + /* + * Clear the DMA bit before putting ISH into D3, + * or ISH FW would reset automatically. + */ + ish_disable_dma(dev); + } return 0; } @@ -288,7 +312,6 @@ static int __maybe_unused ish_resume(struct device *device) ish_resume_device = device; dev->resume_flag = 1; - disable_irq_wake(pdev->irq); schedule_work(&resume_work); return 0;