From: Felipe Balbi Date: Thu, 15 Jan 2015 15:38:03 +0000 (-0600) Subject: arm: boot: dts: dra7: enable dwc3 suspend PHY quirk X-Git-Tag: v3.19-rc6~4^2~4^2~1 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=8c6067355f72e330695968601f0aef3436b473ce;p=linux-block.git arm: boot: dts: dra7: enable dwc3 suspend PHY quirk Whenever Suspend PHY bit is set on DRA7x devices, USB will not work due to Set EP Configuration command always failing. This was only found after a recent commit 2164a47 (usb: dwc3: set SUSPHY bit for all cores, which will be merged for v3.19) added a missing *required* step to dwc3 initialization. Synopsys Databook requires that we enable Suspend PHY bit after initialization but that, unfortunately, breaks DRA7x. Note that the same regression was already patched for AM437x. Reported-by: Roger Quadros Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 22771bc1643a..63f8b007bdc5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1257,6 +1257,8 @@ tx-fifo-resize; maximum-speed = "super-speed"; dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; }; @@ -1278,6 +1280,8 @@ tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; }; @@ -1299,6 +1303,8 @@ tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; };