From: Axel Lin Date: Thu, 11 Apr 2019 01:59:23 +0000 (+0800) Subject: regulator: mcp16502: Remove setup_regulators function X-Git-Tag: for-linus-20190516~97^2^2~45 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=784c24c3e45cc665226e8529d79f319af7cfd09c;hp=4cf469539b635d2588df4f48bf721890f5f2ade5;p=linux-2.6-block.git regulator: mcp16502: Remove setup_regulators function It seems a little bit odd current code pass struct regulator_config rather than a pointer to setup_regulators. The setup_regulators is so simple and only has one caller, so remove it. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c index 9292ab8736c7..e5a02711cb46 100644 --- a/drivers/regulator/mcp16502.c +++ b/drivers/regulator/mcp16502.c @@ -427,36 +427,15 @@ static const struct regmap_config mcp16502_regmap_config = { .wr_table = &mcp16502_yes_reg_table, }; -/* - * set_up_regulators() - initialize all regulators - */ -static int setup_regulators(struct mcp16502 *mcp, struct device *dev, - struct regulator_config config) -{ - struct regulator_dev *rdev; - int i; - - for (i = 0; i < NUM_REGULATORS; i++) { - rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config); - if (IS_ERR(rdev)) { - dev_err(dev, - "failed to register %s regulator %ld\n", - mcp16502_desc[i].name, PTR_ERR(rdev)); - return PTR_ERR(rdev); - } - } - - return 0; -} - static int mcp16502_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct regulator_config config = { }; + struct regulator_dev *rdev; struct device *dev; struct mcp16502 *mcp; struct regmap *rmap; - int ret = 0; + int i, ret; dev = &client->dev; config.dev = dev; @@ -482,9 +461,15 @@ static int mcp16502_probe(struct i2c_client *client, return PTR_ERR(mcp->lpm); } - ret = setup_regulators(mcp, dev, config); - if (ret != 0) - return ret; + for (i = 0; i < NUM_REGULATORS; i++) { + rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config); + if (IS_ERR(rdev)) { + dev_err(dev, + "failed to register %s regulator %ld\n", + mcp16502_desc[i].name, PTR_ERR(rdev)); + return PTR_ERR(rdev); + } + } mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);