From: Wesley Cheng Date: Tue, 29 Dec 2020 23:05:35 +0000 (-0800) Subject: usb: dwc3: gadget: Allow runtime suspend if UDC unbinded X-Git-Tag: io_uring-worker.v3-2021-02-25~75^2~187 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=77adb8bdf422;p=linux-2.6-block.git usb: dwc3: gadget: Allow runtime suspend if UDC unbinded The DWC3 runtime suspend routine checks for the USB connected parameter to determine if the controller can enter into a low power state. The connected state is only set to false after receiving a disconnect event. However, in the case of a device initiated disconnect (i.e. UDC unbind), the controller is halted and a disconnect event is never generated. Set the connected flag to false if issuing a device initiated disconnect to allow the controller to be suspended. Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/1609283136-22140-2-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 950a67c9dabc..97b33d3c7a1c 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2107,6 +2107,17 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) } } + /* + * Check the return value for successful resume, or error. For a + * successful resume, the DWC3 runtime PM resume routine will handle + * the run stop sequence, so avoid duplicate operations here. + */ + ret = pm_runtime_get_sync(dwc->dev); + if (!ret || ret < 0) { + pm_runtime_put(dwc->dev); + return 0; + } + /* * Synchronize any pending event handling before executing the controller * halt routine. @@ -2145,10 +2156,12 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) % dwc->ev_buf->length; } + dwc->connected = false; } ret = dwc3_gadget_run_stop(dwc, is_on, false); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put(dwc->dev); return ret; }