From: Bastien Roucariès Date: Thu, 16 Sep 2021 08:17:21 +0000 (+0000) Subject: ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode X-Git-Tag: v5.15~25^2~3^2 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=55dd7e059098ce4bd0a55c251cb78e74604abb57;p=linux-block.git ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") sets the RX/TX delay according to the phy-mode property in the device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the wrong setting. Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets the Ethernet working again on this board. Signed-off-by: Bastien Roucariès Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210916081721.237137-1-rouca@debian.org --- diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 8077f1716fbc..ecb91fb899ff 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -112,7 +112,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; };