From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 13 Dec 2017 00:00:29 +0000 (-0800)
Subject: net: phy: phylink: Report MoCA as PORT_BNC
X-Git-Tag: for-linus-20180210~31^2~364^2
X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=4be11ef0bdf5b3a4861d5b65bcdf32f2bfbc5263;p=linux-block.git

net: phy: phylink: Report MoCA as PORT_BNC

Similarly to what PHYLIB already does, make sure that
PHY_INTERFACE_MODE_MOCA is reported as PORT_BNC.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 1acdda69b3c6..c89b8c63f16a 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -556,7 +556,10 @@ struct phylink *phylink_create(struct net_device *ndev,
 	pl->netdev = ndev;
 	pl->phy_state.interface = iface;
 	pl->link_interface = iface;
-	pl->link_port = PORT_MII;
+	if (iface == PHY_INTERFACE_MODE_MOCA)
+		pl->link_port = PORT_BNC;
+	else
+		pl->link_port = PORT_MII;
 	pl->link_config.interface = iface;
 	pl->link_config.pause = MLO_PAUSE_AN;
 	pl->link_config.speed = SPEED_UNKNOWN;