From: Andre Przywara <andre.przywara@arm.com>
Date: Mon, 30 Jul 2018 12:31:34 +0000 (+0100)
Subject: arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage
X-Git-Tag: v4.20-rc1~66^2~24^2~11
X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=480f58cdbe392d4387a2193b6131a277e0111dd0;p=linux-block.git

arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage

According to the NanoPi-A64 schematics, DCDC1 is connected to a voltage
rail named "VDD_SYS_3.3V". All users seem to expect 3.3V here: the
Ethernet PHY, the uSD card slot, the camera interface and the GPIO pins
on the headers.
Fix up the voltage on the regulator to lift it up to 3.3V.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index 98dbff19f5cc..5caba225b4f7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -125,9 +125,9 @@
 
 &reg_dcdc1 {
 	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {