From: LABBE Corentin Date: Wed, 31 May 2017 07:18:38 +0000 (+0200) Subject: arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver X-Git-Tag: v4.13-rc1~157^2~320^2~14 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=33125eaae481ad7da6b281f25b77a7bc91732b25;p=linux-block.git arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000 speed. This patch enable the dwmac-sun8i on Allwinner H3/H5 SoC Device-tree. SoC H3/H5 have an internal PHY, so optionals syscon and ephy are set. Signed-off-by: Corentin Labbe Signed-off-by: David S. Miller --- diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index d9691fc8239a..45a9a3003cc6 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -285,6 +285,14 @@ interrupt-controller; #interrupt-cells = <3>; + emac_rgmii_pins: emac0 { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD7", "PD8", "PD9", "PD10", + "PD12", "PD13", "PD15", "PD16", "PD17"; + function = "emac"; + drive-strength = <40>; + }; + i2c0_pins: i2c0 { pins = "PA11", "PA12"; function = "i2c0"; @@ -381,6 +389,32 @@ clocks = <&osc24M>; }; + emac: ethernet@1c30000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x104>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + }; + spi0: spi@01c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>;