From: Ricardo Ribalda Date: Fri, 16 Aug 2024 12:31:59 +0000 (+0000) Subject: media: ar0521: Refactor ar0521_power_off() X-Git-Tag: v6.12-rc1~82^2~51 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=2933d7e12ed792e12ab690efd15f6e7ce81ba739;p=linux-block.git media: ar0521: Refactor ar0521_power_off() Factor out all the power off logic, except the clk_disable_unprepare(), to a new function __ar0521_power_off(). This allows ar0521_power_on() to explicitly clean-out the clock during the error-path. The following smatch warning is fixed: drivers/media/i2c/ar0521.c:912 ar0521_power_on() warn: 'sensor->extclk' from clk_prepare_enable() not released on lines: 912. Signed-off-by: Ricardo Ribalda Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- diff --git a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c index 09331cf95c62..56a724b4d47e 100644 --- a/drivers/media/i2c/ar0521.c +++ b/drivers/media/i2c/ar0521.c @@ -835,14 +835,12 @@ static const struct initial_reg { be(0x0707)), /* 3F44: couple k factor 2 */ }; -static int ar0521_power_off(struct device *dev) +static void __ar0521_power_off(struct device *dev) { struct v4l2_subdev *sd = dev_get_drvdata(dev); struct ar0521_dev *sensor = to_ar0521_dev(sd); int i; - clk_disable_unprepare(sensor->extclk); - if (sensor->reset_gpio) gpiod_set_value(sensor->reset_gpio, 1); /* assert RESET signal */ @@ -850,6 +848,16 @@ static int ar0521_power_off(struct device *dev) if (sensor->supplies[i]) regulator_disable(sensor->supplies[i]); } +} + +static int ar0521_power_off(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct ar0521_dev *sensor = to_ar0521_dev(sd); + + clk_disable_unprepare(sensor->extclk); + __ar0521_power_off(dev); + return 0; } @@ -908,7 +916,8 @@ static int ar0521_power_on(struct device *dev) return 0; off: - ar0521_power_off(dev); + clk_disable_unprepare(sensor->extclk); + __ar0521_power_off(dev); return ret; }