From: Ansuel Smith Date: Tue, 14 Sep 2021 12:33:45 +0000 (+0200) Subject: net: phy: at803x: add support for qca 8327 internal phy X-Git-Tag: block-5.16-2021-11-13~96^2~457 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=0ccf8511182436183c031e8a2f740ae91a02c625;p=linux-block.git net: phy: at803x: add support for qca 8327 internal phy Add support for qca8327 internal phy needed for correct init of the switch port. It does use the same qca8337 function and reg just with a different id. Signed-off-by: Ansuel Smith Tested-by: Rosen Penev Tested-by: Andrew Lunn Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index bdac087058b2..719860a93d7c 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -1420,6 +1420,19 @@ static struct phy_driver at803x_driver[] = { .get_sset_count = at803x_get_sset_count, .get_strings = at803x_get_strings, .get_stats = at803x_get_stats, +}, { + /* QCA8327 */ + .phy_id = QCA8327_PHY_ID, + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "QCA PHY 8327", + /* PHY_GBIT_FEATURES */ + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, + .soft_reset = genphy_soft_reset, + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, }, }; module_phy_driver(at803x_driver); @@ -1430,6 +1443,8 @@ static struct mdio_device_id __maybe_unused atheros_tbl[] = { { PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) }, { PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) }, { PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) }, + { PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) }, + { PHY_ID_MATCH_EXACT(QCA8327_PHY_ID) }, { } };