From: Philippe Schenker Date: Tue, 14 Mar 2023 10:24:02 +0000 (+0100) Subject: arm64: dts: colibri-imx8x: Add no-1-8-v to sd-card X-Git-Tag: v6.4-rc1~168^2~19^2~25 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=09fad38e261d22dc70a14ce7dd4bb081e028f465;p=linux-block.git arm64: dts: colibri-imx8x: Add no-1-8-v to sd-card Many Colibri carrier boards are using 3.3V pull-up resistors on the SD-Card connector. Letting it switch to 1.8V is an invalid state. Do prevent this from happening by keeping the signaling voltage at 3.3V. Signed-off-by: Philippe Schenker Signed-off-by: Shawn Guo --- diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi index 61033b79e44e..2e228c5b8109 100644 --- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi @@ -304,6 +304,7 @@ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; disable-wp; + no-1-8-v; }; &iomuxc {