From: Ville Syrjälä Date: Thu, 1 Nov 2018 15:05:56 +0000 (+0200) Subject: drm/i915: Clean up skl+ PLANE_POS vs. scaler handling X-Git-Tag: for-linus-20190104~57^2~17^2~64 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=07464c7c0cf773b86372d128d17a892529c0775a;p=linux-block.git drm/i915: Clean up skl+ PLANE_POS vs. scaler handling On skl+ the scaler (when enabled) will take care of the plane output position. Make the code less ugly by just setting crtc_x/y to 0 when the scaler is enabled. Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181101150605.18235-6-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi --- diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 6d9f321cdf7b..facf7ca8f14f 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -492,6 +492,12 @@ skl_program_plane(struct intel_plane *plane, if (alpha < 0xff) keymsk |= PLANE_KEYMSK_ALPHA_ENABLE; + /* The scaler will handle the output position */ + if (plane_state->scaler_id >= 0) { + crtc_x = 0; + crtc_y = 0; + } + spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) @@ -537,14 +543,10 @@ skl_program_plane(struct intel_plane *plane, I915_WRITE_FW(PLANE_CUS_CTL(pipe, plane_id), cus_ctl); } - if (plane_state->scaler_id >= 0) { - if (!slave) - skl_program_scaler(plane, crtc_state, plane_state); + if (!slave && plane_state->scaler_id >= 0) + skl_program_scaler(plane, crtc_state, plane_state); - I915_WRITE_FW(PLANE_POS(pipe, plane_id), 0); - } else { - I915_WRITE_FW(PLANE_POS(pipe, plane_id), (crtc_y << 16) | crtc_x); - } + I915_WRITE_FW(PLANE_POS(pipe, plane_id), (crtc_y << 16) | crtc_x); I915_WRITE_FW(PLANE_CTL(pipe, plane_id), plane_ctl); I915_WRITE_FW(PLANE_SURF(pipe, plane_id),