From: Chris Wilson Date: Sun, 10 Nov 2019 18:57:50 +0000 (+0000) Subject: drm/i915/icl: Refine PG_HYSTERESIS X-Git-Tag: v5.6-rc1~34^2~21^2~398 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=028a7a989cb57790868df20e50dff682e73e33e6;p=linux-block.git drm/i915/icl: Refine PG_HYSTERESIS After doing some measuring, Icelake behaves on a par with Broadwell, and without having to compromise for low power cores with long latencies, we can reduce the powergating hysteresis so that the powersaving is enabled faster. No impact observed on client side throughput measures (so negligible increase in extra switching), and inspection from high frequency polling using igt/gem_exec_nop/sequential, provided an estimate for the upper bound before we can measure a substantial impact on latency. Signed-off-by: Chris Wilson Cc: Mika Kuoppala Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20191110185806.17413-9-chris@chris-wilson.co.uk --- diff --git a/drivers/gpu/drm/i915/gt/intel_rc6.c b/drivers/gpu/drm/i915/gt/intel_rc6.c index 5ad4a92a9582..5e3ba034bd46 100644 --- a/drivers/gpu/drm/i915/gt/intel_rc6.c +++ b/drivers/gpu/drm/i915/gt/intel_rc6.c @@ -88,15 +88,12 @@ static void gen11_rc6_enable(struct intel_rc6 *rc6) * do not want the enable hysteresis to less than the wakeup latency. * * igt/gem_exec_nop/sequential provides a rough estimate for the - * service latency, and puts it around 10us for Broadwell (and other - * big core) and around 40us for Broxton (and other low power cores). - * [Note that for legacy ringbuffer submission, this is less than 1us!] - * However, the wakeup latency on Broxton is closer to 100us. To be - * conservative, we have to factor in a context switch on top (due - * to ksoftirqd). + * service latency, and puts it under 10us for Icelake, similar to + * Broadwell+, To be conservative, we want to factor in a context + * switch on top (due to ksoftirqd). */ - set(uncore, GEN9_MEDIA_PG_IDLE_HYSTERESIS, 250); - set(uncore, GEN9_RENDER_PG_IDLE_HYSTERESIS, 250); + set(uncore, GEN9_MEDIA_PG_IDLE_HYSTERESIS, 60); + set(uncore, GEN9_RENDER_PG_IDLE_HYSTERESIS, 60); /* 3a: Enable RC6 */ set(uncore, GEN6_RC_CONTROL,