From: Conrad Kostecki Date: Tue, 23 Jan 2024 18:30:02 +0000 (+0100) Subject: ahci: asm1166: correct count of reported ports X-Git-Tag: v6.8-rc2~14^2~1 X-Git-Url: https://git.kernel.dk/?a=commitdiff_plain;h=0077a504e1a4468669fd2e011108db49133db56e;p=linux-2.6-block.git ahci: asm1166: correct count of reported ports The ASM1166 SATA host controller always reports wrongly, that it has 32 ports. But in reality, it only has six ports. This seems to be a hardware issue, as all tested ASM1166 SATA host controllers reports such high count of ports. Example output: ahci 0000:09:00.0: AHCI 0001.0301 32 slots 32 ports 6 Gbps 0xffffff3f impl SATA mode. By adjusting the port_map, the count is limited to six ports. New output: ahci 0000:09:00.0: AHCI 0001.0301 32 slots 32 ports 6 Gbps 0x3f impl SATA mode. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=211873 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218346 Signed-off-by: Conrad Kostecki Reviewed-by: Hans de Goede Signed-off-by: Niklas Cassel --- diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 3a5f3255f51b..762c5d8b7c1a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -663,6 +663,11 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); static void ahci_pci_save_initial_config(struct pci_dev *pdev, struct ahci_host_priv *hpriv) { + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { + dev_info(&pdev->dev, "ASM1166 has only six ports\n"); + hpriv->saved_port_map = 0x3f; + } + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { dev_info(&pdev->dev, "JMB361 has only one port\n"); hpriv->saved_port_map = 1;