arm64: dts: qcom: align PMIC GPIO pin configuration with DT schema

DT schema expects PMIC GPIO pin configuration nodes to be named with
'-state' suffix.  Optional children should be either 'pinconf' or
followed with '-pins' suffix.  This fixes dtbs_check warnings like:

  sdm845-xiaomi-beryllium.dtb: gpios@c000: 'vol-up-active' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220507194913.261121-6-krzysztof.kozlowski@linaro.org

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 7c1eab605c15a197e1d02a683e48864fb6689e54..79254841715b8b06c2154c892e01736d4de2fbe4 100644 (file)
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -773,7 +773,7 @@
                "USB_HUB_RESET_N_PM",
                "USB_SW_SEL_PM";
 
-       usb_hub_reset_pm: usb-hub-reset-pm {
+       usb_hub_reset_pm: usb-hub-reset-pm-state {
                pins = "gpio3";
                function = PMIC_GPIO_FUNC_NORMAL;
 
@@ -781,14 +781,14 @@
                output-high;
        };
 
-       usb_hub_reset_pm_device: usb-hub-reset-pm-device {
+       usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
                pins = "gpio3";
                function = PMIC_GPIO_FUNC_NORMAL;
 
                output-low;
        };
 
-       usb_sw_sel_pm: usb-sw-sel-pm {
+       usb_sw_sel_pm: usb-sw-sel-pm-state {
                pins = "gpio4";
                function = PMIC_GPIO_FUNC_NORMAL;
 
@@ -797,7 +797,7 @@
                output-high;
        };
 
-       usb_sw_sel_pm_device: usb-sw-sel-pm-device {
+       usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
                pins = "gpio4";
                function = PMIC_GPIO_FUNC_NORMAL;
 
@@ -806,7 +806,7 @@
                output-low;
        };
 
-       pm8916_gpios_leds: pm8916-gpios-leds {
+       pm8916_gpios_leds: pm8916-gpios-leds-state {
                pins = "gpio1", "gpio2";
                function = PMIC_GPIO_FUNC_NORMAL;
 

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 49afbb1a066a3a79f718003fec980a1ebfe45d7a..e0e965f4dd2fea6559b6b553c9f3d3963aefedbf 100644 (file)
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -555,7 +555,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
 
-       ls_exp_gpio_f: pm8994_gpio5 {
+       ls_exp_gpio_f: pm8994-gpio5-state {
                pinconf {
                        pins = "gpio5";
                        output-low;
@@ -563,7 +563,7 @@
                };
        };
 
-       bt_en_gpios: bt_en_gpios {
+       bt_en_gpios: bt-en-pios-state {
                pinconf {
                        pins = "gpio19";
                        function = PMIC_GPIO_FUNC_NORMAL;
@@ -574,7 +574,7 @@
                };
        };
 
-       wlan_en_gpios: wlan_en_gpios {
+       wlan_en_gpios: wlan-en-gpios-state {
                pinconf {
                        pins = "gpio8";
                        function = PMIC_GPIO_FUNC_NORMAL;
@@ -585,7 +585,7 @@
                };
        };
 
-       audio_mclk: clk_div1 {
+       audio_mclk: clk-div1-state {
                pinconf {
                        pins = "gpio15";
                        function = "func1";
@@ -593,7 +593,7 @@
                };
        };
 
-       volume_up_gpio: pm8996_gpio2 {
+       volume_up_gpio: pm8996-gpio2-state {
                pinconf {
                        pins = "gpio2";
                        function = "normal";
@@ -605,7 +605,7 @@
                };
        };
 
-       divclk4_pin_a: divclk4 {
+       divclk4_pin_a: divclk4-state {
                pinconf {
                        pins = "gpio18";
                        function = PMIC_GPIO_FUNC_FUNC2;
@@ -615,7 +615,7 @@
                };
        };
 
-       usb3_vbus_det_gpio: pm8996_gpio22 {
+       usb3_vbus_det_gpio: pm8996-gpio22-state {
                pinconf {
                        pins = "gpio22";
                        function = PMIC_GPIO_FUNC_NORMAL;
@@ -671,7 +671,7 @@
                "NC",
                "NC";
 
-       usb2_vbus_det_gpio: pmi8996_gpio6 {
+       usb2_vbus_det_gpio: pmi8996-gpio6-state {
                pinconf {
                        pins = "gpio6";
                        function = PMIC_GPIO_FUNC_NORMAL;

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 9b4b7de7cec2d6f9da3c745c7570abb618fdce07..636a3b6ba7dcd37f2a011b7cfabba74a150f32c8 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -463,7 +463,7 @@
 };
 
 &pm8916_gpios {
-       nfc_clk_req: nfc-clk-req {
+       nfc_clk_req: nfc-clk-req-state {
                pins = "gpio2";
                function = "func1";
 

diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index cc038f9b641fa1261fd535c8ff9d88018c1d4d57..9161b9e1bda1454bf8095049ce1fc9d8748db3a4 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -470,7 +470,7 @@
 };
 
 &pm8994_gpios {
-       bt_en_gpios: bt_en_gpios {
+       bt_en_gpios: bt-en-gpios-state {
                pinconf {
                        pins = "gpio19";
                        function = PMIC_GPIO_FUNC_NORMAL;
@@ -481,7 +481,7 @@
                };
        };
 
-       divclk4_pin_a: divclk4 {
+       divclk4_pin_a: divclk4-state {
                pinconf {
                        pins = "gpio18";
                        function = PMIC_GPIO_FUNC_FUNC2;
@@ -519,19 +519,19 @@
         * TODO: remove once a driver is available
         * TODO: add VBUS GPIO 5
         */
-       hd3ss460_pol: pol_low {
+       hd3ss460_pol: pol-low-state {
                pins = "gpio8";
                drive-strength = <3>;
                bias-pull-down;
        };
 
-       hd3ss460_amsel: amsel_high {
+       hd3ss460_amsel: amsel-high-state {
                pins = "gpio9";
                drive-strength = <1>;
                bias-pull-up;
        };
 
-       hd3ss460_en: en_high {
+       hd3ss460_en: en-high-state {
                pins = "gpio10";
                drive-strength = <1>;
                bias-pull-up;

diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index 0486357b9769b37b509f79ae1e19bb4afc951ecf..e165b5e890a09bca5a3cb8851d7b91709e13a1c4 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -242,14 +242,14 @@
         * probably a reason for it, and just to be on the safe side, we follow suit.
         */
        pm8994_gpios_defaults: pm8994-gpios-default-state {
-               pm8994-gpio1-nc {
+               pm8994-gpio1-nc-pins {
                        pins = "gpio1";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
                        bias-high-impedance;
                };
 
-               vol-down-n {
+               vol-down-n-pins {
                        pins = "gpio2";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -259,7 +259,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               vol-up-n {
+               vol-up-n-pins {
                        pins = "gpio3";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -268,7 +268,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               camera-snapshot-n {
+               camera-snapshot-n-pins {
                        pins = "gpio4";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -278,7 +278,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               camera-focus-n {
+               camera-focus-n-pins {
                        pins = "gpio5";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -288,7 +288,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               pm8994-gpio6-nc {
+               pm8994-gpio6-nc-pins {
                        pins = "gpio6";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -296,7 +296,7 @@
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               nfc-download {
+               nfc-download-pins {
                        pins = "gpio7";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        output-low;
@@ -306,7 +306,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               pm8994-gpio8-nc {
+               pm8994-gpio8-nc-pins {
                        pins = "gpio8";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        output-low;
@@ -316,7 +316,7 @@
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               pm8994-gpio9-nc {
+               pm8994-gpio9-nc-pins {
                        pins = "gpio9";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        output-high;
@@ -326,7 +326,7 @@
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               nfc-clock {
+               nfc-clock-pins {
                        pins = "gpio10";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        input-enable;
@@ -336,7 +336,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               pm8994-gpio11-nc {
+               pm8994-gpio11-nc-pins {
                        pins = "gpio11";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -344,7 +344,7 @@
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               pm8994-gpio12-nc {
+               pm8994-gpio12-nc-pins {
                        pins = "gpio12";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -352,7 +352,7 @@
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               ear-enable {
+               ear-enable-pins {
                        pins = "gpio13";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        output-high;
@@ -362,7 +362,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               pm8994-gpio14-nc {
+               pm8994-gpio14-nc-pins {
                        pins = "gpio14";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -372,7 +372,7 @@
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               pm-divclk1-gpio {
+               pm-divclk1-gpio-pins {
                        pins = "gpio15";
                        function = "func1";
                        output-high;
@@ -382,13 +382,13 @@
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               pmi-clk-gpio {
+               pmi-clk-gpio-pins {
                        pins = "gpio16";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
                };
 
-               pm8994-gpio17-nc {
+               pm8994-gpio17-nc-pins {
                        pins = "gpio17";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -396,7 +396,7 @@
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               rome-sleep {
+               rome-sleep-pins {
                        pins = "gpio18";
                        function = PMIC_GPIO_FUNC_FUNC2;
                        output-low;
@@ -406,7 +406,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               pm8994-gpio19-nc {
+               pm8994-gpio19-nc-pins {
                        pins = "gpio19";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        output-low;
@@ -416,7 +416,7 @@
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               pm8994-gpio22-nc {
+               pm8994-gpio22-nc-pins {
                        pins = "gpio22";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -441,34 +441,34 @@
                "RF_ID";
 
        pm8994_mpps_defaults: pm8994-mpps-default-state {
-               lcd-id_adc-mpp {
+               lcd-id_adc-mpp-pins {
                        pins = "mpp2";
                        function = "analog";
                        input-enable;
                        qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>;
                };
 
-               pm-mpp4-nc {
+               pm-mpp4-nc-pins {
                        pins = "mpp4";
                        function = "digital";
                        bias-high-impedance;
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               flash-therm-mpp {
+               flash-therm-mpp-pins {
                        pins = "mpp5";
                        function = "analog";
                        input-enable;
                        qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
                };
 
-               mpp6-nc {
+               mpp6-nc-pins {
                        pins = "mpp6";
                        function = "digital";
                        bias-high-impedance;
                };
 
-               rf-id-mpp {
+               rf-id-mpp-pins {
                        pins = "mpp8";
                        function = "analog";
                        input-enable;
@@ -499,7 +499,7 @@
                "NC";
 
        pmi8994_gpios_defaults: pmi8994-gpios-default-state {
-               vib-ldo-en-gpio {
+               vib-ldo-en-gpio-pins {
                        pins = "gpio1";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -508,7 +508,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               pmi-gpio2-nc {
+               pmi-gpio2-nc-pins {
                        pins = "gpio2";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -518,7 +518,7 @@
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               pmi-gpio3-nc {
+               pmi-gpio3-nc-pins {
                        pins = "gpio3";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -528,7 +528,7 @@
                        power-source = <PM8994_GPIO_VPH>;
                };
 
-               pmi-gpio4-nc {
+               pmi-gpio4-nc-pins {
                        pins = "gpio4";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -537,7 +537,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               pmi-gpio5-nc {
+               pmi-gpio5-nc-pins {
                        pins = "gpio5";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -546,7 +546,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               pmi-gpio6-nc {
+               pmi-gpio6-nc-pins {
                        pins = "gpio6";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -555,7 +555,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               pmi-gpio7-nc {
+               pmi-gpio7-nc-pins {
                        pins = "gpio7";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -564,7 +564,7 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               pmi-gpio8-nc {
+               pmi-gpio8-nc-pins {
                        pins = "gpio8";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
@@ -573,13 +573,13 @@
                        power-source = <PM8994_GPIO_S4>;
                };
 
-               usb-switch-sel {
+               usb-switch-sel-pins {
                        pins = "gpio9";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        drive-push-pull;
                };
 
-               pmi-gpio10-nc {
+               pmi-gpio10-nc-pins {
                        pins = "gpio10";
                        function = PMIC_GPIO_FUNC_NORMAL;
                        output-low;

diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index a7090befc16f6ea44e0cd912833958e9fc440f20..259d2fcc6e7e36334e199adfc76a1fabd1c635ed 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -608,7 +608,7 @@
 };
 
 &pm8994_gpios {
-       wlan_en_default: wlan-en-default {
+       wlan_en_default: wlan-en-state {
                pins = "gpio8";
                function = PMIC_GPIO_FUNC_NORMAL;
                output-low;
@@ -617,7 +617,7 @@
                bias-disable;
        };
 
-       rome_enable_default: rome-enable-default {
+       rome_enable_default: rome-enable-state {
                pins = "gpio9";
                function = PMIC_GPIO_FUNC_NORMAL;
                output-high;
@@ -625,7 +625,7 @@
                power-source = <PM8994_GPIO_VPH>;
        };
 
-       divclk1_default: divclk1_default {
+       divclk1_default: divclk1-state {
                pins = "gpio15";
                function = PMIC_GPIO_FUNC_FUNC1;
                bias-disable;
@@ -633,7 +633,7 @@
                qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
        };
 
-       divclk4_pin_a: divclk4 {
+       divclk4_pin_a: divclk4-state {
                pins = "gpio18";
                function = PMIC_GPIO_FUNC_FUNC2;
                bias-disable;

diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index 22978d06f85bfbf2c698874287c52116c97f51ee..ec68c03868db91c594c7596ac701196a5a1684b1 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -257,7 +257,7 @@
                "UIM_BATT_ALARM",       /* GPIO_21 */
                "NC";                   /* GPIO_22 */
 
-       divclk2_pin_a: divclk2 {
+       divclk2_pin_a: divclk2-state {
                pins = "gpio16";
                function = PMIC_GPIO_FUNC_FUNC2;
                bias-disable;

diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index adbb933f4cd1b1578b39c06f32258d87e4d19aeb..39f09f29a784388a690f0a6d69a00aadd0d2311f 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -345,7 +345,7 @@
 };
 
 &pm8998_gpio {
-       vol_up_pin_a: vol-up-active {
+       vol_up_pin_a: vol-up-active-state {
                pins = "gpio6";
                function = "normal";
                bias-pull-up;
@@ -353,7 +353,7 @@
                qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
        };
 
-       cam_focus_pin_a: cam-focus-btn-active {
+       cam_focus_pin_a: cam-focus-btn-active-state {
                pins = "gpio7";
                function = "normal";
                bias-pull-up;
@@ -361,7 +361,7 @@
                qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
        };
 
-       cam_snapshot_pin_a: cam-snapshot-btn-active {
+       cam_snapshot_pin_a: cam-snapshot-btn-active-state {
                pins = "gpio8";
                function = "normal";
                bias-pull-up;

diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
index 9563eb62db88a47c851e46c45f2310171b8e4d82..ef2a88a64d32a45533d38c10fb1e60b7cff70117 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -32,7 +32,7 @@
 };
 
 &pmi8998_gpio {
-       button_backlight_default: button-backlight-default {
+       button_backlight_default: button-backlight-state {
                pinconf {
                        pins = "gpio5";
                        function = "normal";

diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index f61c6d3578472e94336a8107def501dac64eb94f..9460e517c50ad2f4ebff089b010e1cd581ce5ae9 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -270,7 +270,7 @@
 };
 
 &pm8998_gpio {
-       vol_keys_default: vol-keys-default {
+       vol_keys_default: vol-keys-state {
                pins = "gpio5", "gpio6";
                function = "normal";
                bias-pull-up;

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
index 978495a8a6b9a2a77083d588bc5207293377a8a1..20fe0394a3c16c3b257bccdb51d3c398ac4d1fba 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
@@ -38,7 +38,7 @@
 };
 
 &pmi8998_gpio {
-       disp_dvdd_en: disp-dvdd-en-active {
+       disp_dvdd_en: disp-dvdd-en-active-state {
                pins = "gpio10";
                function = "normal";
                bias-disable;

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index d9a2ac875dc8b8565273fbab0ef2d85840b8f6ad..2269b714272edcfedd0dd67ca0685937333fc2b5 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -286,7 +286,7 @@
 };
 
 &pm8998_gpio {
-       vol_down_pin_a: vol-down-active {
+       vol_down_pin_a: vol-down-active-state {
                pins = "gpio5";
                function = PMIC_GPIO_FUNC_NORMAL;
                bias-pull-up;
@@ -294,7 +294,7 @@
                qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
        };
 
-       cam_focus_pin_a: cam-focus-btn-active {
+       cam_focus_pin_a: cam-focus-btn-active-state {
                pins = "gpio7";
                function = PMIC_GPIO_FUNC_NORMAL;
                bias-pull-up;
@@ -302,7 +302,7 @@
                qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
        };
 
-       cam_snapshot_pin_a: cam-snapshot-btn-active {
+       cam_snapshot_pin_a: cam-snapshot-btn-active-state {
                pins = "gpio8";
                function = PMIC_GPIO_FUNC_NORMAL;
                bias-pull-up;
@@ -310,7 +310,7 @@
                qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
        };
 
-       audio_mclk_pin: audio-mclk-pin-active {
+       audio_mclk_pin: audio-mclk-pin-active-state {
                pins = "gpio13";
                function = "func2";
                power-source = <0>;
@@ -318,7 +318,7 @@
 };
 
 &pmi8998_gpio {
-       cam_vio_default: cam-vio-active {
+       cam_vio_default: cam-vio-active-state {
                pins = "gpio1";
                function = PMIC_GPIO_FUNC_NORMAL;
                bias-disable;
@@ -328,7 +328,7 @@
                power-source = <1>;
        };
 
-       vib_default: vib-en {
+       vib_default: vib-en-state {
                pins = "gpio5";
                function = PMIC_GPIO_FUNC_NORMAL;
                bias-disable;

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 2f3104a84417c91a2f6170e6521f1004a38a4d79..1721ebe5759b9f64ca0070409110968a20f89656 100644 (file)
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -304,7 +304,7 @@
 };
 
 &pms405_gpios {
-       usb_vbus_boost_pin: usb-vbus-boost-pin {
+       usb_vbus_boost_pin: usb-vbus-boost-state {
                pinconf {
                        pins = "gpio3";
                        function = PMIC_GPIO_FUNC_NORMAL;
@@ -312,7 +312,7 @@
                        power-source = <1>;
                };
        };
-       usb3_vbus_pin: usb3-vbus-pin {
+       usb3_vbus_pin: usb3-vbus-state {
                pinconf {
                        pins = "gpio12";
                        function = PMIC_GPIO_FUNC_NORMAL;

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 0e63f707b9115f9f1920d8399dabb9eede3b3d56..9549341f98fbcb019f5ec02d87e8c5a6283b9c0e 100644 (file)
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -796,7 +796,7 @@
                "NC",
                "PM3003A_MODE";
 
-       lt9611_rst_pin: lt9611-rst-pin {
+       lt9611_rst_pin: lt9611-rst-state {
                pins = "gpio5";
                function = "normal";
 

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index acdb36f4479fcc27ad65ef17380bda73140d48e4..33ada24ec917806e2a92eb781524ddc5162d2f4f 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -467,7 +467,7 @@
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
 &pm6150l_gpio {
-       disp_pins: disp-pins {
+       disp_pins: disp-state {
                pinconf {
                        pins = "gpio3";
                        function = PMIC_GPIO_FUNC_FUNC1;

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 0c1e8160910f25cbd9d22a528244f418d68bdd9c..a731163857ea3cee40d877d8f64097c39091397f 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -444,7 +444,7 @@
 };
 
 &pm7325_gpios {
-       key_vol_up_default: key-vol-up-default {
+       key_vol_up_default: key-vol-up-state {
                pins = "gpio6";
                function = "normal";
                input-enable;

diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 903785d2512d618c43df58bab8f644b34de63d21..4c25ffc39535f710ed7a8503e678cdd6c14f5f05 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -523,7 +523,7 @@ mos_bt_uart: &uart7 {
  */
 
 &pm8350c_gpios {
-       pmic_edp_bl_en: pmic-edp-bl-en {
+       pmic_edp_bl_en: pmic-edp-bl-en-state {
                pins = "gpio7";
                function = "normal";
                bias-disable;
@@ -533,7 +533,7 @@ mos_bt_uart: &uart7 {
                output-low;
        };
 
-       pmic_edp_bl_pwm: pmic-edp-bl-pwm {
+       pmic_edp_bl_pwm: pmic-edp-bl-pwm-state {
                pins = "gpio8";
                function = "func1";
                bias-disable;

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 77849e2fb02e3315afa3b106f564e925460cb66f..ea7fcf5b65c6998557278085919c51ab21c589c8 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -569,7 +569,7 @@
                "OPTION2",
                "PM845_SLB";
 
-       cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en {
+       cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
                pins = "gpio12";
                function = "normal";
 
@@ -578,7 +578,7 @@
                qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
        };
 
-       cam0_avdd_2v8_en_default: cam0-avdd-2v8-en {
+       cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
                pins = "gpio10";
                function = "normal";
 
@@ -587,7 +587,7 @@
                qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
        };
 
-       vol_up_pin_a: vol-up-active {
+       vol_up_pin_a: vol-up-active-state {
                pins = "gpio6";
                function = "normal";
                input-enable;

diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 07b729f9fec5e68958b99c00034eaec9f8e30549..c9d05e94040cc7fdf5e2db7ec73fba659c4ac264 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -440,7 +440,7 @@
 };
 
 &pm8998_gpio {
-       volume_down_gpio: pm8998_gpio5 {
+       volume_down_gpio: pm8998-gpio5-state {
                pinconf {
                        pins = "gpio5";
                        function = "normal";
@@ -450,7 +450,7 @@
                };
        };
 
-       volume_up_gpio: pm8998_gpio6 {
+       volume_up_gpio: pm8998-gpio6-state {
                pinconf {
                        pins = "gpio6";
                        function = "normal";

diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 103cc40816fd3779027c334deb854f1dcd39cf88..10070288398701d3aa3f7135faea526b221711ff 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -508,7 +508,7 @@
 };
 
 &pm8998_gpio {
-       volume_up_gpio: pm8998_gpio6 {
+       volume_up_gpio: pm8998-gpio6-state {
                pinconf {
                        pins = "gpio6";
                        function = "normal";

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index d88dc07205f7b3a73395bddb1f2dab2bac2247ae..b5a6cdccec67c4a14b93389125ed6b6445aeb452 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -306,7 +306,7 @@
 };
 
 &pm8998_gpio {
-       vol_up_pin_a: vol-up-active {
+       vol_up_pin_a: vol-up-active-state {
                pins = "gpio6";
                function = "normal";
                input-enable;

diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 61925216f5e3bcf4c849fbb5a19c3851e5f3b09c..14cc2c87a96b66f67e3f68207f51f304dab3ad66 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -339,7 +339,7 @@
 };
 
 &pm6350_gpios {
-       gpio_keys_pin: gpio-keys-pin {
+       gpio_keys_pin: gpio-keys-state {
                pins = "gpio2";
                function = PMIC_GPIO_FUNC_NORMAL;
                bias-pull-up;