#define VC5_FEEDBACK_FRAC_DIV(n) (0x19 + (n))
#define VC5_RC_CONTROL0 0x1e
#define VC5_RC_CONTROL1 0x1f
-/* Register 0x20 is factory reserved */
+
+/* These registers are named "Unused Factory Reserved Registers" */
+#define VC5_RESERVED_X0(idx) (0x20 + ((idx) * 0x10))
+#define VC5_RESERVED_X0_BYPASS_SYNC BIT(7) /* bypass_sync<idx> bit */
/* Output divider control for divider 1,2,3,4 */
#define VC5_OUT_DIV_CONTROL(idx) (0x21 + ((idx) * 0x10))
#define VC5_OUT_DIV_SKEW_INT(idx, n) (0x2b + ((idx) * 0x10) + (n))
#define VC5_OUT_DIV_INT(idx, n) (0x2d + ((idx) * 0x10) + (n))
#define VC5_OUT_DIV_SKEW_FRAC(idx) (0x2f + ((idx) * 0x10))
-/* Registers 0x30, 0x40, 0x50 are factory reserved */
/* Clock control register for clock 1,2 */
#define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n))
#define VC5_HAS_INTERNAL_XTAL BIT(0)
/* chip has PFD requency doubler */
#define VC5_HAS_PFD_FREQ_DBL BIT(1)
+/* chip has bits to disable FOD sync */
+#define VC5_HAS_BYPASS_SYNC_BIT BIT(2)
/* Supported IDT VC5 models. */
enum vc5_model {
unsigned int src;
int ret;
+ /*
+ * When enabling a FOD, all currently enabled FODs are briefly
+ * stopped in order to synchronize all of them. This causes a clock
+ * disruption to any unrelated chips that might be already using
+ * other clock outputs. Bypass the sync feature to avoid the issue,
+ * which is possible on the VersaClock 6E family via reserved
+ * registers.
+ */
+ if (vc5->chip_info->flags & VC5_HAS_BYPASS_SYNC_BIT) {
+ ret = regmap_update_bits(vc5->regmap,
+ VC5_RESERVED_X0(hwdata->num),
+ VC5_RESERVED_X0_BYPASS_SYNC,
+ VC5_RESERVED_X0_BYPASS_SYNC);
+ if (ret)
+ return ret;
+ }
+
/*
* If the input mux is disabled, enable it first and
* select source from matching FOD.
.model = IDT_VC6_5P49V6965,
.clk_fod_cnt = 4,
.clk_out_cnt = 5,
- .flags = 0,
+ .flags = VC5_HAS_BYPASS_SYNC_BIT,
};
static const struct i2c_device_id vc5_id[] = {