Currently the CPUFreq core exposes two sysfs attributes that can be used
to query current frequency of a given CPU(s): namely cpuinfo_cur_freq
and scaling_cur_freq. Both provide slightly different view on the
subject and they do come with their own drawbacks.
cpuinfo_cur_freq provides higher precision though at a cost of being
rather expensive. Moreover, the information retrieved via this attribute
is somewhat short lived as frequency can change at any point of time
making it difficult to reason from.
scaling_cur_freq, on the other hand, tends to be less accurate but then
the actual level of precision (and source of information) varies between
architectures making it a bit ambiguous.
The new attribute, cpuinfo_avg_freq, is intended to provide more stable,
distinct interface, exposing an average frequency of a given CPU(s), as
reported by the hardware, over a time frame spanning no more than a few
milliseconds. As it requires appropriate hardware support, this
interface is optional.
Note that under the hood, the new attribute relies on the information
provided by arch_freq_get_on_cpu, which, up to this point, has been
feeding data for scaling_cur_freq attribute, being the source of
ambiguity when it comes to interpretation. This has been amended by
restoring the intended behavior for scaling_cur_freq, with a new
dedicated config option to maintain status quo for those, who may need
it.
CC: Jonathan Corbet <corbet@lwn.net>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Phil Auld <pauld@redhat.com>
CC: x86@kernel.org
CC: linux-doc@vger.kernel.org
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20250131162439.3843071-3-beata.michalska@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If that frequency cannot be determined, this attribute should not
be present.
+``cpuinfo_avg_freq``
+ An average frequency (in KHz) of all CPUs belonging to a given policy,
+ derived from a hardware provided feedback and reported on a time frame
+ spanning at most few milliseconds.
+
+ This is expected to be based on the frequency the hardware actually runs
+ at and, as such, might require specialised hardware support (such as AMU
+ extension on ARM). If one cannot be determined, this attribute should
+ not be present.
+
+ Note, that failed attempt to retrieve current frequency for a given
+ CPU(s) will result in an appropriate error, i.e: EAGAIN for CPU that
+ remains idle (raised on ARM).
+
``cpuinfo_max_freq``
Maximum possible operating frequency the CPUs belonging to this policy
can run at (in kHz).
Some architectures (e.g. ``x86``) may attempt to provide information
more precisely reflecting the current CPU frequency through this
attribute, but that still may not be the exact current CPU frequency as
- seen by the hardware at the moment.
+ seen by the hardware at the moment. This behavior though, is only
+ available via c:macro:``CPUFREQ_ARCH_CUR_FREQ`` option.
``scaling_driver``
The scaling driver currently in use.
option lets the probing code bypass some of those checks if the
parameter "relaxed_check=1" is passed to the module.
+config CPUFREQ_ARCH_CUR_FREQ
+ default y
+ bool "Current frequency derived from HW provided feedback"
+ help
+ This determines whether the scaling_cur_freq sysfs attribute returns
+ the last requested frequency or a more precise value based on hardware
+ provided feedback (as architected counters).
+ Given that a more precise frequency can now be provided via the
+ cpuinfo_avg_freq attribute, by enabling this option,
+ scaling_cur_freq maintains the provision of a counter based frequency,
+ for compatibility reasons.
+
return -EOPNOTSUPP;
}
+static inline bool cpufreq_avg_freq_supported(struct cpufreq_policy *policy)
+{
+ return arch_freq_get_on_cpu(policy->cpu) != -EOPNOTSUPP;
+}
+
static ssize_t show_scaling_cur_freq(struct cpufreq_policy *policy, char *buf)
{
ssize_t ret;
int freq;
- freq = arch_freq_get_on_cpu(policy->cpu);
+ freq = IS_ENABLED(CONFIG_CPUFREQ_ARCH_CUR_FREQ)
+ ? arch_freq_get_on_cpu(policy->cpu)
+ : 0;
+
if (freq > 0)
ret = sysfs_emit(buf, "%u\n", freq);
else if (cpufreq_driver->setpolicy && cpufreq_driver->get)
return sysfs_emit(buf, "<unknown>\n");
}
+/*
+ * show_cpuinfo_avg_freq - average CPU frequency as detected by hardware
+ */
+static ssize_t show_cpuinfo_avg_freq(struct cpufreq_policy *policy,
+ char *buf)
+{
+ int avg_freq = arch_freq_get_on_cpu(policy->cpu);
+
+ if (avg_freq > 0)
+ return sysfs_emit(buf, "%u\n", avg_freq);
+ return avg_freq != 0 ? avg_freq : -EINVAL;
+}
+
/*
* show_scaling_governor - show the current policy for the specified CPU
*/
}
cpufreq_freq_attr_ro_perm(cpuinfo_cur_freq, 0400);
+cpufreq_freq_attr_ro(cpuinfo_avg_freq);
cpufreq_freq_attr_ro(cpuinfo_min_freq);
cpufreq_freq_attr_ro(cpuinfo_max_freq);
cpufreq_freq_attr_ro(cpuinfo_transition_latency);
return ret;
}
+ if (cpufreq_avg_freq_supported(policy)) {
+ ret = sysfs_create_file(&policy->kobj, &cpuinfo_avg_freq.attr);
+ if (ret)
+ return ret;
+ }
+
ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
if (ret)
return ret;
projects / linux-block.git / commitdiff