#ifndef _LINUX_OBJTOOL_H
#define _LINUX_OBJTOOL_H
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-/*
- * This struct is used by asm and inline asm code to manually annotate the
- * location of registers on the stack.
- */
-struct unwind_hint {
- u32 ip;
- s16 sp_offset;
- u8 sp_reg;
- u8 type;
- u8 signal;
- u8 end;
-};
-#endif
-
-/*
- * UNWIND_HINT_TYPE_CALL: Indicates that sp_reg+sp_offset resolves to PREV_SP
- * (the caller's SP right before it made the call). Used for all callable
- * functions, i.e. all C code and all callable asm functions.
- *
- * UNWIND_HINT_TYPE_REGS: Used in entry code to indicate that sp_reg+sp_offset
- * points to a fully populated pt_regs from a syscall, interrupt, or exception.
- *
- * UNWIND_HINT_TYPE_REGS_PARTIAL: Used in entry code to indicate that
- * sp_reg+sp_offset points to the iret return frame.
- *
- * UNWIND_HINT_FUNC: Generate the unwind metadata of a callable function.
- * Useful for code which doesn't have an ELF function annotation.
- *
- * UNWIND_HINT_ENTRY: machine entry without stack, SYSCALL/SYSENTER etc.
- */
-#define UNWIND_HINT_TYPE_CALL 0
-#define UNWIND_HINT_TYPE_REGS 1
-#define UNWIND_HINT_TYPE_REGS_PARTIAL 2
-#define UNWIND_HINT_TYPE_FUNC 3
-#define UNWIND_HINT_TYPE_ENTRY 4
-#define UNWIND_HINT_TYPE_SAVE 5
-#define UNWIND_HINT_TYPE_RESTORE 6
+#include <linux/objtool_types.h>
#ifdef CONFIG_OBJTOOL
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_OBJTOOL_TYPES_H
+#define _LINUX_OBJTOOL_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/*
+ * This struct is used by asm and inline asm code to manually annotate the
+ * location of registers on the stack.
+ */
+struct unwind_hint {
+ u32 ip;
+ s16 sp_offset;
+ u8 sp_reg;
+ u8 type;
+ u8 signal;
+ u8 end;
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * UNWIND_HINT_TYPE_CALL: Indicates that sp_reg+sp_offset resolves to PREV_SP
+ * (the caller's SP right before it made the call). Used for all callable
+ * functions, i.e. all C code and all callable asm functions.
+ *
+ * UNWIND_HINT_TYPE_REGS: Used in entry code to indicate that sp_reg+sp_offset
+ * points to a fully populated pt_regs from a syscall, interrupt, or exception.
+ *
+ * UNWIND_HINT_TYPE_REGS_PARTIAL: Used in entry code to indicate that
+ * sp_reg+sp_offset points to the iret return frame.
+ *
+ * UNWIND_HINT_FUNC: Generate the unwind metadata of a callable function.
+ * Useful for code which doesn't have an ELF function annotation.
+ *
+ * UNWIND_HINT_ENTRY: machine entry without stack, SYSCALL/SYSENTER etc.
+ */
+#define UNWIND_HINT_TYPE_CALL 0
+#define UNWIND_HINT_TYPE_REGS 1
+#define UNWIND_HINT_TYPE_REGS_PARTIAL 2
+#define UNWIND_HINT_TYPE_FUNC 3
+#define UNWIND_HINT_TYPE_ENTRY 4
+#define UNWIND_HINT_TYPE_SAVE 5
+#define UNWIND_HINT_TYPE_RESTORE 6
+
+#endif /* _LINUX_OBJTOOL_TYPES_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_OBJTOOL_H
-#define _LINUX_OBJTOOL_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-/*
- * This struct is used by asm and inline asm code to manually annotate the
- * location of registers on the stack.
- */
-struct unwind_hint {
- u32 ip;
- s16 sp_offset;
- u8 sp_reg;
- u8 type;
- u8 signal;
- u8 end;
-};
-#endif
-
-/*
- * UNWIND_HINT_TYPE_CALL: Indicates that sp_reg+sp_offset resolves to PREV_SP
- * (the caller's SP right before it made the call). Used for all callable
- * functions, i.e. all C code and all callable asm functions.
- *
- * UNWIND_HINT_TYPE_REGS: Used in entry code to indicate that sp_reg+sp_offset
- * points to a fully populated pt_regs from a syscall, interrupt, or exception.
- *
- * UNWIND_HINT_TYPE_REGS_PARTIAL: Used in entry code to indicate that
- * sp_reg+sp_offset points to the iret return frame.
- *
- * UNWIND_HINT_FUNC: Generate the unwind metadata of a callable function.
- * Useful for code which doesn't have an ELF function annotation.
- *
- * UNWIND_HINT_ENTRY: machine entry without stack, SYSCALL/SYSENTER etc.
- */
-#define UNWIND_HINT_TYPE_CALL 0
-#define UNWIND_HINT_TYPE_REGS 1
-#define UNWIND_HINT_TYPE_REGS_PARTIAL 2
-#define UNWIND_HINT_TYPE_FUNC 3
-#define UNWIND_HINT_TYPE_ENTRY 4
-#define UNWIND_HINT_TYPE_SAVE 5
-#define UNWIND_HINT_TYPE_RESTORE 6
-
-#ifdef CONFIG_OBJTOOL
-
-#include <asm/asm.h>
-
-#ifndef __ASSEMBLY__
-
-#define UNWIND_HINT(sp_reg, sp_offset, type, signal, end) \
- "987: \n\t" \
- ".pushsection .discard.unwind_hints\n\t" \
- /* struct unwind_hint */ \
- ".long 987b - .\n\t" \
- ".short " __stringify(sp_offset) "\n\t" \
- ".byte " __stringify(sp_reg) "\n\t" \
- ".byte " __stringify(type) "\n\t" \
- ".byte " __stringify(signal) "\n\t" \
- ".byte " __stringify(end) "\n\t" \
- ".balign 4 \n\t" \
- ".popsection\n\t"
-
-/*
- * This macro marks the given function's stack frame as "non-standard", which
- * tells objtool to ignore the function when doing stack metadata validation.
- * It should only be used in special cases where you're 100% sure it won't
- * affect the reliability of frame pointers and kernel stack traces.
- *
- * For more information, see tools/objtool/Documentation/objtool.txt.
- */
-#define STACK_FRAME_NON_STANDARD(func) \
- static void __used __section(".discard.func_stack_frame_non_standard") \
- *__func_stack_frame_non_standard_##func = func
-
-/*
- * STACK_FRAME_NON_STANDARD_FP() is a frame-pointer-specific function ignore
- * for the case where a function is intentionally missing frame pointer setup,
- * but otherwise needs objtool/ORC coverage when frame pointers are disabled.
- */
-#ifdef CONFIG_FRAME_POINTER
-#define STACK_FRAME_NON_STANDARD_FP(func) STACK_FRAME_NON_STANDARD(func)
-#else
-#define STACK_FRAME_NON_STANDARD_FP(func)
-#endif
-
-#define ANNOTATE_NOENDBR \
- "986: \n\t" \
- ".pushsection .discard.noendbr\n\t" \
- _ASM_PTR " 986b\n\t" \
- ".popsection\n\t"
-
-#define ASM_REACHABLE \
- "998:\n\t" \
- ".pushsection .discard.reachable\n\t" \
- ".long 998b - .\n\t" \
- ".popsection\n\t"
-
-#else /* __ASSEMBLY__ */
-
-/*
- * This macro indicates that the following intra-function call is valid.
- * Any non-annotated intra-function call will cause objtool to issue a warning.
- */
-#define ANNOTATE_INTRA_FUNCTION_CALL \
- 999: \
- .pushsection .discard.intra_function_calls; \
- .long 999b; \
- .popsection;
-
-/*
- * In asm, there are two kinds of code: normal C-type callable functions and
- * the rest. The normal callable functions can be called by other code, and
- * don't do anything unusual with the stack. Such normal callable functions
- * are annotated with the ENTRY/ENDPROC macros. Most asm code falls in this
- * category. In this case, no special debugging annotations are needed because
- * objtool can automatically generate the ORC data for the ORC unwinder to read
- * at runtime.
- *
- * Anything which doesn't fall into the above category, such as syscall and
- * interrupt handlers, tends to not be called directly by other functions, and
- * often does unusual non-C-function-type things with the stack pointer. Such
- * code needs to be annotated such that objtool can understand it. The
- * following CFI hint macros are for this type of code.
- *
- * These macros provide hints to objtool about the state of the stack at each
- * instruction. Objtool starts from the hints and follows the code flow,
- * making automatic CFI adjustments when it sees pushes and pops, filling out
- * the debuginfo as necessary. It will also warn if it sees any
- * inconsistencies.
- */
-.macro UNWIND_HINT type:req sp_reg=0 sp_offset=0 signal=0 end=0
-.Lunwind_hint_ip_\@:
- .pushsection .discard.unwind_hints
- /* struct unwind_hint */
- .long .Lunwind_hint_ip_\@ - .
- .short \sp_offset
- .byte \sp_reg
- .byte \type
- .byte \signal
- .byte \end
- .balign 4
- .popsection
-.endm
-
-.macro STACK_FRAME_NON_STANDARD func:req
- .pushsection .discard.func_stack_frame_non_standard, "aw"
- _ASM_PTR \func
- .popsection
-.endm
-
-.macro STACK_FRAME_NON_STANDARD_FP func:req
-#ifdef CONFIG_FRAME_POINTER
- STACK_FRAME_NON_STANDARD \func
-#endif
-.endm
-
-.macro ANNOTATE_NOENDBR
-.Lhere_\@:
- .pushsection .discard.noendbr
- .quad .Lhere_\@
- .popsection
-.endm
-
-.macro REACHABLE
-.Lhere_\@:
- .pushsection .discard.reachable
- .long .Lhere_\@ - .
- .popsection
-.endm
-
-#endif /* __ASSEMBLY__ */
-
-#else /* !CONFIG_OBJTOOL */
-
-#ifndef __ASSEMBLY__
-
-#define UNWIND_HINT(sp_reg, sp_offset, type, signal, end) \
- "\n\t"
-#define STACK_FRAME_NON_STANDARD(func)
-#define STACK_FRAME_NON_STANDARD_FP(func)
-#define ANNOTATE_NOENDBR
-#define ASM_REACHABLE
-#else
-#define ANNOTATE_INTRA_FUNCTION_CALL
-.macro UNWIND_HINT type:req sp_reg=0 sp_offset=0 signal=0 end=0
-.endm
-.macro STACK_FRAME_NON_STANDARD func:req
-.endm
-.macro ANNOTATE_NOENDBR
-.endm
-.macro REACHABLE
-.endm
-#endif
-
-#endif /* CONFIG_OBJTOOL */
-
-#endif /* _LINUX_OBJTOOL_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_OBJTOOL_TYPES_H
+#define _LINUX_OBJTOOL_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/*
+ * This struct is used by asm and inline asm code to manually annotate the
+ * location of registers on the stack.
+ */
+struct unwind_hint {
+ u32 ip;
+ s16 sp_offset;
+ u8 sp_reg;
+ u8 type;
+ u8 signal;
+ u8 end;
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * UNWIND_HINT_TYPE_CALL: Indicates that sp_reg+sp_offset resolves to PREV_SP
+ * (the caller's SP right before it made the call). Used for all callable
+ * functions, i.e. all C code and all callable asm functions.
+ *
+ * UNWIND_HINT_TYPE_REGS: Used in entry code to indicate that sp_reg+sp_offset
+ * points to a fully populated pt_regs from a syscall, interrupt, or exception.
+ *
+ * UNWIND_HINT_TYPE_REGS_PARTIAL: Used in entry code to indicate that
+ * sp_reg+sp_offset points to the iret return frame.
+ *
+ * UNWIND_HINT_FUNC: Generate the unwind metadata of a callable function.
+ * Useful for code which doesn't have an ELF function annotation.
+ *
+ * UNWIND_HINT_ENTRY: machine entry without stack, SYSCALL/SYSENTER etc.
+ */
+#define UNWIND_HINT_TYPE_CALL 0
+#define UNWIND_HINT_TYPE_REGS 1
+#define UNWIND_HINT_TYPE_REGS_PARTIAL 2
+#define UNWIND_HINT_TYPE_FUNC 3
+#define UNWIND_HINT_TYPE_ENTRY 4
+#define UNWIND_HINT_TYPE_SAVE 5
+#define UNWIND_HINT_TYPE_RESTORE 6
+
+#endif /* _LINUX_OBJTOOL_TYPES_H */
projects / linux-block.git / commitdiff