MIPS: Loongson: Add new early_printk implmentation
authorWu Zhangjin <wuzj@lemote.com>
Thu, 2 Jul 2009 15:20:20 +0000 (23:20 +0800)
committerRalf Baechle <ralf@linux-mips.org>
Thu, 17 Sep 2009 18:07:45 +0000 (20:07 +0200)
This patch is based on the implementation in the lm2e-fixes branch of
Philippe's git://git.linux-cisco.org/linux-mips.git and the
malta-specific early_printk implementation.

Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/lemote/lm2e/Makefile
arch/mips/lemote/lm2e/early_printk.c [new file with mode: 0644]

index b0c03390241d39c7ef670ba3be640c3db16786f2..f19173252d6a894ab2e93e14b7c3e5ffcaa41386 100644 (file)
@@ -4,4 +4,9 @@
 
 obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o mem.o
 
+#
+# Early printk support
+#
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/lemote/lm2e/early_printk.c b/arch/mips/lemote/lm2e/early_printk.c
new file mode 100644 (file)
index 0000000..811c7de
--- /dev/null
@@ -0,0 +1,41 @@
+/*  early printk support
+ *
+ *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *  Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ *  Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/serial_reg.h>
+
+#include <asm/mips-boards/bonito64.h>
+
+#define UART_BASE (BONITO_PCIIO_BASE + 0x3f8)
+
+#define PORT(base, offset) (u8 *)(base + offset)
+
+static inline unsigned int serial_in(phys_addr_t base, int offset)
+{
+       return readb(PORT(base, offset));
+}
+
+static inline void serial_out(phys_addr_t base, int offset, int value)
+{
+       writeb(value, PORT(base, offset));
+}
+
+void prom_putchar(char c)
+{
+       phys_addr_t uart_base =
+               (phys_addr_t) ioremap_nocache(UART_BASE, 8);
+
+       while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0)
+               ;
+
+       serial_out(uart_base, UART_TX, c);
+}