staging: board: Remove Armadillo-800-EVA board staging code

Since commits 1399ebacbf590dfb ("drm: renesas: shmobile: Add DT
support"), 138588e9fa237f97 ("ARM: dts: renesas: r8a7740: Add LCDC
nodes"), and c9a0ed13382660c9 ("ARM: dts: renesas: armadillo800eva: Add
LCD panel"), there is no longer any use for the Atmark Techno
Armadillo-800-EVA board staging code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/6d51e06a8586997b31eecead55a369f01c5696a7.1705932585.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/board/Makefile b/drivers/staging/board/Makefile
index 5db091b5ca01596a1ebc669b7058aa47941ec863..b6a00c93c2cc10dd51b06dd6dff9643666ae3642 100644 (file)
--- a/drivers/staging/board/Makefile
+++ b/drivers/staging/board/Makefile
@@ -1,3 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y  := board.o
-obj-$(CONFIG_ARCH_R8A7740)     += armadillo800eva.o

diff --git a/drivers/staging/board/armadillo800eva.c b/drivers/staging/board/armadillo800eva.c
deleted file mode 100644 (file)
index 0225234..0000000
--- a/drivers/staging/board/armadillo800eva.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Staging board support for Armadillo 800 eva.
- * Enable not-yet-DT-capable devices here.
- *
- * Based on board-armadillo800eva.c
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/fb.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/videodev2.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#include "board.h"
-
-static struct fb_videomode lcdc0_mode = {
-       .name           = "AMPIER/AM-800480",
-       .xres           = 800,
-       .yres           = 480,
-       .left_margin    = 88,
-       .right_margin   = 40,
-       .hsync_len      = 128,
-       .upper_margin   = 20,
-       .lower_margin   = 5,
-       .vsync_len      = 5,
-       .sync           = 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-       .clock_source   = LCDC_CLK_BUS,
-       .ch[0] = {
-               .chan           = LCDC_CHAN_MAINLCD,
-               .fourcc         = V4L2_PIX_FMT_RGB565,
-               .interface_type = RGB24,
-               .clock_divider  = 5,
-               .flags          = 0,
-               .lcd_modes      = &lcdc0_mode,
-               .num_modes      = 1,
-               .panel_cfg = {
-                       .width  = 111,
-                       .height = 68,
-               },
-       },
-};
-
-static struct resource lcdc0_resources[] = {
-       DEFINE_RES_MEM_NAMED(0xfe940000, 0x4000, "LCD0"),
-       DEFINE_RES_IRQ(177 + 32),
-};
-
-static struct platform_device lcdc0_device = {
-       .name           = "sh_mobile_lcdc_fb",
-       .num_resources  = ARRAY_SIZE(lcdc0_resources),
-       .resource       = lcdc0_resources,
-       .id             = 0,
-       .dev    = {
-               .platform_data  = &lcdc0_info,
-               .coherent_dma_mask = DMA_BIT_MASK(32),
-       },
-};
-
-static const struct board_staging_clk lcdc0_clocks[] __initconst = {
-       { "lcdc0", NULL, "sh_mobile_lcdc_fb.0" },
-};
-
-static const struct board_staging_dev armadillo800eva_devices[] __initconst = {
-       {
-               .pdev    = &lcdc0_device,
-               .clocks  = lcdc0_clocks,
-               .nclocks = ARRAY_SIZE(lcdc0_clocks),
-               .domain  = "/system-controller@e6180000/pm-domains/c5/a4lc@1"
-       },
-};
-
-static void __init armadillo800eva_init(void)
-{
-       board_staging_gic_setup_xlate("arm,pl390", 32);
-       board_staging_register_devices(armadillo800eva_devices,
-                                      ARRAY_SIZE(armadillo800eva_devices));
-}
-
-board_staging("renesas,armadillo800eva", armadillo800eva_init);