ARM: dts: dra7: Correct clock tree for sys_32k_ck
authorKeerthy <j-keerthy@ti.com>
Mon, 4 Apr 2016 05:37:15 +0000 (11:07 +0530)
committerTony Lindgren <tony@atomide.com>
Fri, 8 Apr 2016 16:02:39 +0000 (09:02 -0700)
This is w.r.t J6/J6eco: 32clk is pseudo (erratum i856) - clock source.
Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz external
crystal is not enabled at power up. Instead the CPU falls back to using
an emulation for the 32KHz clock which is SYSCLK1/610.  SYSCLK1 is usually
20MHz on boards so far (which gives an emulated frequency of 32.786KHz)

Modelling the same in device tree.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/dra7xx-clocks.dtsi

index d0bae06b7eb7e8600f75213a576b778704ecacff..ef2164a99d0f0202a8f2c021c626dc55ec3f1390 100644 (file)
                clock-frequency = <32768>;
        };
 
-       sys_32k_ck: sys_32k_ck {
+       sys_clk32_crystal_ck: sys_clk32_crystal_ck {
                #clock-cells = <0>;
                compatible = "fixed-clock";
                clock-frequency = <32768>;
        };
 
+       sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+               #clock-cells = <0>;
+               compatible = "fixed-factor-clock";
+               clocks = <&sys_clkin1>;
+               clock-mult = <1>;
+               clock-div = <610>;
+       };
+
        virt_12000000_ck: virt_12000000_ck {
                #clock-cells = <0>;
                compatible = "fixed-clock";
                ti,bit-shift = <22>;
                reg = <0x0558>;
        };
+
+       sys_32k_ck: sys_32k_ck {
+               #clock-cells = <0>;
+               compatible = "ti,mux-clock";
+               clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
+               ti,bit-shift = <8>;
+               reg = <0x6c4>;
+       };
 };