--- /dev/null
- * ve_spc_global_wakeup_irq()
+ /*
+ * Versatile Express Serial Power Controller (SPC) support
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * Authors: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+ * Achin Gupta <achin.gupta@arm.com>
+ * Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+ #include <linux/clk-provider.h>
+ #include <linux/clkdev.h>
+ #include <linux/cpu.h>
+ #include <linux/delay.h>
+ #include <linux/err.h>
+ #include <linux/interrupt.h>
+ #include <linux/io.h>
+ #include <linux/platform_device.h>
+ #include <linux/pm_opp.h>
+ #include <linux/slab.h>
+ #include <linux/semaphore.h>
+
+ #include <asm/cacheflush.h>
+
+ #include "spc.h"
+
+ #define SPCLOG "vexpress-spc: "
+
+ #define PERF_LVL_A15 0x00
+ #define PERF_REQ_A15 0x04
+ #define PERF_LVL_A7 0x08
+ #define PERF_REQ_A7 0x0c
+ #define COMMS 0x10
+ #define COMMS_REQ 0x14
+ #define PWC_STATUS 0x18
+ #define PWC_FLAG 0x1c
+
+ /* SPC wake-up IRQs status and mask */
+ #define WAKE_INT_MASK 0x24
+ #define WAKE_INT_RAW 0x28
+ #define WAKE_INT_STAT 0x2c
+ /* SPC power down registers */
+ #define A15_PWRDN_EN 0x30
+ #define A7_PWRDN_EN 0x34
+ /* SPC per-CPU mailboxes */
+ #define A15_BX_ADDR0 0x68
+ #define A7_BX_ADDR0 0x78
+
+ /* SPC CPU/cluster reset statue */
+ #define STANDBYWFI_STAT 0x3c
+ #define STANDBYWFI_STAT_A15_CPU_MASK(cpu) (1 << (cpu))
+ #define STANDBYWFI_STAT_A7_CPU_MASK(cpu) (1 << (3 + (cpu)))
+
+ /* SPC system config interface registers */
+ #define SYSCFG_WDATA 0x70
+ #define SYSCFG_RDATA 0x74
+
+ /* A15/A7 OPP virtual register base */
+ #define A15_PERFVAL_BASE 0xC10
+ #define A7_PERFVAL_BASE 0xC30
+
+ /* Config interface control bits */
+ #define SYSCFG_START BIT(31)
+ #define SYSCFG_SCC (6 << 20)
+ #define SYSCFG_STAT (14 << 20)
+
+ /* wake-up interrupt masks */
+ #define GBL_WAKEUP_INT_MSK (0x3 << 10)
+
+ /* TC2 static dual-cluster configuration */
+ #define MAX_CLUSTERS 2
+
+ /*
+ * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS
+ * operation, the operation could start just before jiffie is about
+ * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz
+ */
+ #define TIMEOUT_US 20000
+
+ #define MAX_OPPS 8
+ #define CA15_DVFS 0
+ #define CA7_DVFS 1
+ #define SPC_SYS_CFG 2
+ #define STAT_COMPLETE(type) ((1 << 0) << (type << 2))
+ #define STAT_ERR(type) ((1 << 1) << (type << 2))
+ #define RESPONSE_MASK(type) (STAT_COMPLETE(type) | STAT_ERR(type))
+
+ struct ve_spc_opp {
+ unsigned long freq;
+ unsigned long u_volt;
+ };
+
+ struct ve_spc_drvdata {
+ void __iomem *baseaddr;
+ /*
+ * A15s cluster identifier
+ * It corresponds to A15 processors MPIDR[15:8] bitfield
+ */
+ u32 a15_clusid;
+ uint32_t cur_rsp_mask;
+ uint32_t cur_rsp_stat;
+ struct semaphore sem;
+ struct completion done;
+ struct ve_spc_opp *opps[MAX_CLUSTERS];
+ int num_opps[MAX_CLUSTERS];
+ };
+
+ static struct ve_spc_drvdata *info;
+
+ static inline bool cluster_is_a15(u32 cluster)
+ {
+ return cluster == info->a15_clusid;
+ }
+
+ /**
- *
- * @set: if true, global wake-up IRQs are set, if false they are cleared
++ * ve_spc_global_wakeup_irq() - sets/clears global wakeup IRQs
++ *
++ * @set: if true, global wake-up IRQs are set, if false they are cleared
+ *
+ * Function to set/clear global wakeup IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
- * ve_spc_cpu_wakeup_irq()
- *
- * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
- * it might be used in code paths where normal cacheable locks are not
- * working. Locking must be provided by the caller to ensure atomicity.
+ */
+ void ve_spc_global_wakeup_irq(bool set)
+ {
+ u32 reg;
+
+ reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+ if (set)
+ reg |= GBL_WAKEUP_INT_MSK;
+ else
+ reg &= ~GBL_WAKEUP_INT_MSK;
+
+ writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+ }
+
+ /**
- * ve_spc_powerdown()
++ * ve_spc_cpu_wakeup_irq() - sets/clears per-CPU wake-up IRQs
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @set: if true, wake-up IRQs are set, if false they are cleared
++ *
++ * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
++ * it might be used in code paths where normal cacheable locks are not
++ * working. Locking must be provided by the caller to ensure atomicity.
+ */
+ void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set)
+ {
+ u32 mask, reg;
+
+ if (cluster >= MAX_CLUSTERS)
+ return;
+
+ mask = BIT(cpu);
+
+ if (!cluster_is_a15(cluster))
+ mask <<= 4;
+
+ reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+ if (set)
+ reg |= mask;
+ else
+ reg &= ~mask;
+
+ writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+ }
+
+ /**
+ * ve_spc_set_resume_addr() - set the jump address used for warm boot
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @addr: physical resume address
+ */
+ void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr)
+ {
+ void __iomem *baseaddr;
+
+ if (cluster >= MAX_CLUSTERS)
+ return;
+
+ if (cluster_is_a15(cluster))
+ baseaddr = info->baseaddr + A15_BX_ADDR0 + (cpu << 2);
+ else
+ baseaddr = info->baseaddr + A7_BX_ADDR0 + (cpu << 2);
+
+ writel_relaxed(addr, baseaddr);
+ }
+
+ /**
- *
- * @cluster: mpidr[15:8] bitfield describing cluster affinity level
- * @enable: if true enables powerdown, if false disables it
++ * ve_spc_powerdown() - enables/disables cluster powerdown
++ *
++ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
++ * @enable: if true enables powerdown, if false disables it
+ *
+ * Function to enable/disable cluster powerdown. Not protected by locking
+ * since it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
- * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+ */
+ void ve_spc_powerdown(u32 cluster, bool enable)
+ {
+ u32 pwdrn_reg;
+
+ if (cluster >= MAX_CLUSTERS)
+ return;
+
+ pwdrn_reg = cluster_is_a15(cluster) ? A15_PWRDN_EN : A7_PWRDN_EN;
+ writel_relaxed(enable, info->baseaddr + pwdrn_reg);
+ }
+
+ static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster)
+ {
+ return cluster_is_a15(cluster) ?
+ STANDBYWFI_STAT_A15_CPU_MASK(cpu)
+ : STANDBYWFI_STAT_A7_CPU_MASK(cpu);
+ }
+
+ /**
- if (init_opp_table[cluster])
++ * ve_spc_cpu_in_wfi() - Checks if the specified CPU is in WFI or not
+ *
+ * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ *
+ * @return: non-zero if and only if the specified CPU is in WFI
+ *
+ * Take care when interpreting the result of this function: a CPU might
+ * be in WFI temporarily due to idle, and is not necessarily safely
+ * parked.
+ */
+ int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+ {
+ int ret;
+ u32 mask = standbywfi_cpu_mask(cpu, cluster);
+
+ if (cluster >= MAX_CLUSTERS)
+ return 1;
+
+ ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT);
+
+ pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n",
+ __func__, STANDBYWFI_STAT, ret, mask);
+
+ return ret & mask;
+ }
+
+ static int ve_spc_get_performance(int cluster, u32 *freq)
+ {
+ struct ve_spc_opp *opps = info->opps[cluster];
+ u32 perf_cfg_reg = 0;
+ u32 perf;
+
+ perf_cfg_reg = cluster_is_a15(cluster) ? PERF_LVL_A15 : PERF_LVL_A7;
+
+ perf = readl_relaxed(info->baseaddr + perf_cfg_reg);
+ if (perf >= info->num_opps[cluster])
+ return -EINVAL;
+
+ opps += perf;
+ *freq = opps->freq;
+
+ return 0;
+ }
+
+ /* find closest match to given frequency in OPP table */
+ static int ve_spc_round_performance(int cluster, u32 freq)
+ {
+ int idx, max_opp = info->num_opps[cluster];
+ struct ve_spc_opp *opps = info->opps[cluster];
+ u32 fmin = 0, fmax = ~0, ftmp;
+
+ freq /= 1000; /* OPP entries in kHz */
+ for (idx = 0; idx < max_opp; idx++, opps++) {
+ ftmp = opps->freq;
+ if (ftmp >= freq) {
+ if (ftmp <= fmax)
+ fmax = ftmp;
+ } else {
+ if (ftmp >= fmin)
+ fmin = ftmp;
+ }
+ }
+ if (fmax != ~0)
+ return fmax * 1000;
+ else
+ return fmin * 1000;
+ }
+
+ static int ve_spc_find_performance_index(int cluster, u32 freq)
+ {
+ int idx, max_opp = info->num_opps[cluster];
+ struct ve_spc_opp *opps = info->opps[cluster];
+
+ for (idx = 0; idx < max_opp; idx++, opps++)
+ if (opps->freq == freq)
+ break;
+ return (idx == max_opp) ? -EINVAL : idx;
+ }
+
+ static int ve_spc_waitforcompletion(int req_type)
+ {
+ int ret = wait_for_completion_interruptible_timeout(
+ &info->done, usecs_to_jiffies(TIMEOUT_US));
+ if (ret == 0)
+ ret = -ETIMEDOUT;
+ else if (ret > 0)
+ ret = info->cur_rsp_stat & STAT_COMPLETE(req_type) ? 0 : -EIO;
+ return ret;
+ }
+
+ static int ve_spc_set_performance(int cluster, u32 freq)
+ {
+ u32 perf_cfg_reg;
+ int ret, perf, req_type;
+
+ if (cluster_is_a15(cluster)) {
+ req_type = CA15_DVFS;
+ perf_cfg_reg = PERF_LVL_A15;
+ } else {
+ req_type = CA7_DVFS;
+ perf_cfg_reg = PERF_LVL_A7;
+ }
+
+ perf = ve_spc_find_performance_index(cluster, freq);
+
+ if (perf < 0)
+ return perf;
+
+ if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+ return -ETIME;
+
+ init_completion(&info->done);
+ info->cur_rsp_mask = RESPONSE_MASK(req_type);
+
+ writel(perf, info->baseaddr + perf_cfg_reg);
+ ret = ve_spc_waitforcompletion(req_type);
+
+ info->cur_rsp_mask = 0;
+ up(&info->sem);
+
+ return ret;
+ }
+
+ static int ve_spc_read_sys_cfg(int func, int offset, uint32_t *data)
+ {
+ int ret;
+
+ if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+ return -ETIME;
+
+ init_completion(&info->done);
+ info->cur_rsp_mask = RESPONSE_MASK(SPC_SYS_CFG);
+
+ /* Set the control value */
+ writel(SYSCFG_START | func | offset >> 2, info->baseaddr + COMMS);
+ ret = ve_spc_waitforcompletion(SPC_SYS_CFG);
+
+ if (ret == 0)
+ *data = readl(info->baseaddr + SYSCFG_RDATA);
+
+ info->cur_rsp_mask = 0;
+ up(&info->sem);
+
+ return ret;
+ }
+
+ static irqreturn_t ve_spc_irq_handler(int irq, void *data)
+ {
+ struct ve_spc_drvdata *drv_data = data;
+ uint32_t status = readl_relaxed(drv_data->baseaddr + PWC_STATUS);
+
+ if (info->cur_rsp_mask & status) {
+ info->cur_rsp_stat = status;
+ complete(&drv_data->done);
+ }
+
+ return IRQ_HANDLED;
+ }
+
+ /*
+ * +--------------------------+
+ * | 31 20 | 19 0 |
+ * +--------------------------+
+ * | m_volt | freq(kHz) |
+ * +--------------------------+
+ */
+ #define MULT_FACTOR 20
+ #define VOLT_SHIFT 20
+ #define FREQ_MASK (0xFFFFF)
+ static int ve_spc_populate_opps(uint32_t cluster)
+ {
+ uint32_t data = 0, off, ret, idx;
+ struct ve_spc_opp *opps;
+
+ opps = kcalloc(MAX_OPPS, sizeof(*opps), GFP_KERNEL);
+ if (!opps)
+ return -ENOMEM;
+
+ info->opps[cluster] = opps;
+
+ off = cluster_is_a15(cluster) ? A15_PERFVAL_BASE : A7_PERFVAL_BASE;
+ for (idx = 0; idx < MAX_OPPS; idx++, off += 4, opps++) {
+ ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data);
+ if (!ret) {
+ opps->freq = (data & FREQ_MASK) * MULT_FACTOR;
+ opps->u_volt = (data >> VOLT_SHIFT) * 1000;
+ } else {
+ break;
+ }
+ }
+ info->num_opps[cluster] = idx;
+
+ return ret;
+ }
+
+ static int ve_init_opp_table(struct device *cpu_dev)
+ {
+ int cluster;
+ int idx, ret = 0, max_opp;
+ struct ve_spc_opp *opps;
+
+ cluster = topology_physical_package_id(cpu_dev->id);
+ cluster = cluster < 0 ? 0 : cluster;
+
+ max_opp = info->num_opps[cluster];
+ opps = info->opps[cluster];
+
+ for (idx = 0; idx < max_opp; idx++, opps++) {
+ ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt);
+ if (ret) {
+ dev_warn(cpu_dev, "failed to add opp %lu %lu\n",
+ opps->freq, opps->u_volt);
+ return ret;
+ }
+ }
+ return ret;
+ }
+
+ int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid, int irq)
+ {
+ int ret;
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->baseaddr = baseaddr;
+ info->a15_clusid = a15_clusid;
+
+ if (irq <= 0) {
+ pr_err(SPCLOG "Invalid IRQ %d\n", irq);
+ kfree(info);
+ return -EINVAL;
+ }
+
+ init_completion(&info->done);
+
+ readl_relaxed(info->baseaddr + PWC_STATUS);
+
+ ret = request_irq(irq, ve_spc_irq_handler, IRQF_TRIGGER_HIGH
+ | IRQF_ONESHOT, "vexpress-spc", info);
+ if (ret) {
+ pr_err(SPCLOG "IRQ %d request failed\n", irq);
+ kfree(info);
+ return -ENODEV;
+ }
+
+ sema_init(&info->sem, 1);
+ /*
+ * Multi-cluster systems may need this data when non-coherent, during
+ * cluster power-up/power-down. Make sure driver info reaches main
+ * memory.
+ */
+ sync_cache_w(info);
+ sync_cache_w(&info);
+
+ return 0;
+ }
+
+ struct clk_spc {
+ struct clk_hw hw;
+ int cluster;
+ };
+
+ #define to_clk_spc(spc) container_of(spc, struct clk_spc, hw)
+ static unsigned long spc_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+ {
+ struct clk_spc *spc = to_clk_spc(hw);
+ u32 freq;
+
+ if (ve_spc_get_performance(spc->cluster, &freq))
+ return -EIO;
+
+ return freq * 1000;
+ }
+
+ static long spc_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *parent_rate)
+ {
+ struct clk_spc *spc = to_clk_spc(hw);
+
+ return ve_spc_round_performance(spc->cluster, drate);
+ }
+
+ static int spc_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+ {
+ struct clk_spc *spc = to_clk_spc(hw);
+
+ return ve_spc_set_performance(spc->cluster, rate / 1000);
+ }
+
+ static struct clk_ops clk_spc_ops = {
+ .recalc_rate = spc_recalc_rate,
+ .round_rate = spc_round_rate,
+ .set_rate = spc_set_rate,
+ };
+
+ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
+ {
+ struct clk_init_data init;
+ struct clk_spc *spc;
+
+ spc = kzalloc(sizeof(*spc), GFP_KERNEL);
+ if (!spc)
+ return ERR_PTR(-ENOMEM);
+
+ spc->hw.init = &init;
+ spc->cluster = topology_physical_package_id(cpu_dev->id);
+
+ spc->cluster = spc->cluster < 0 ? 0 : spc->cluster;
+
+ init.name = dev_name(cpu_dev);
+ init.ops = &clk_spc_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+ init.num_parents = 0;
+
+ return devm_clk_register(cpu_dev, &spc->hw);
+ }
+
+ static int __init ve_spc_clk_init(void)
+ {
+ int cpu, cluster;
+ struct clk *clk;
+ bool init_opp_table[MAX_CLUSTERS] = { false };
+
+ if (!info)
+ return 0; /* Continue only if SPC is initialised */
+
+ if (ve_spc_populate_opps(0) || ve_spc_populate_opps(1)) {
+ pr_err("failed to build OPP table\n");
+ return -ENODEV;
+ }
+
+ for_each_possible_cpu(cpu) {
+ struct device *cpu_dev = get_cpu_device(cpu);
+ if (!cpu_dev) {
+ pr_warn("failed to get cpu%d device\n", cpu);
+ continue;
+ }
+ clk = ve_spc_clk_register(cpu_dev);
+ if (IS_ERR(clk)) {
+ pr_warn("failed to register cpu%d clock\n", cpu);
+ continue;
+ }
+ if (clk_register_clkdev(clk, NULL, dev_name(cpu_dev))) {
+ pr_warn("failed to register cpu%d clock lookup\n", cpu);
+ continue;
+ }
+
+ cluster = topology_physical_package_id(cpu_dev->id);
++ if (cluster < 0 || init_opp_table[cluster])
+ continue;
+
+ if (ve_init_opp_table(cpu_dev))
+ pr_warn("failed to initialise cpu%d opp table\n", cpu);
+ else if (dev_pm_opp_set_sharing_cpus(cpu_dev,
+ topology_core_cpumask(cpu_dev->id)))
+ pr_warn("failed to mark OPPs shared for cpu%d\n", cpu);
+ else
+ init_opp_table[cluster] = true;
+ }
+
+ platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);
+ return 0;
+ }
+ device_initcall(ve_spc_clk_init);
projects / linux-block.git / commitdiff